Search Results

Search found 22982 results on 920 pages for 'users'.

Page 863/920 | < Previous Page | 859 860 861 862 863 864 865 866 867 868 869 870  | Next Page >

• SharePoint 2010 Diagnostic Studio Remote Diag

  - by juanlarios

  I have had some time this week to try out some tools that I have been meaning to try out. This week I am trying out the SP 2010 Diagnostic Studio. I installed it successfully and tried it on my development evironment. I was able to build a report and a snapshot of the environment. I decided to turn my attention to my Employer's intranet environment. This would allow me to analyze it and measure it against benchmarks. I didn't want to install the Diagnostic studio on the Production Envorinment, lucky for me, the Diagnostic studio can be run remotely, well...kind of. Issue My development environment is a stand alone, full installation of SharePoint 2010 Server. It has Office 2010, SQL 2008 Enterprise, a DC...well you get the point, it's jammed packed! But more importantly it's a stand alone, self contained VM environment. Well Microsoft has instructions as to how to connect remotely with Diagnostic Studio here. The deciving part of this is that the SP2010DS prompts you for credentails. So I thought I was getting the right account to run the reports. I tried all the Power Shell commands in the link above but I still ended up getting the following errors: 06/28/2011 12:50:18    Connecting to remote server failed with the following error message : The WinRM client cannot process the request...If the SPN exists, but CredSSP cannot use Kerberos to validate the identity of the target computer and you still want to allow the delegation of the user credentials to the target computer, use gpedit.msc and look at the following policy: Computer Configuration -> Administrative Templates -> System -> Credentials Delegation -> Allow Fresh Credentials with NTLM-only Server Authentication.  Verify that it is enabled and configured with an SPN appropriate for the target computer. For example, for a target computer name "myserver.domain.com", the SPN can be one of the following: WSMAN/myserver.domain.com or WSMAN/*.domain.com. Try the request again after these changes. For more information, see the about_Remote_Troubleshooting Help topic. 06/28/2011 12:54:47    Access to the path '\\<targetserver>\C$\Users\<account logging in>\AppData\Local\Temp' is denied. You might also get an error message like this: The WinRM client cannot process the request. A computer policy does not allow the delegation of the user credentials to the target computer. Explanation After looking at the event logs on the target environment, I noticed that there were a several Security Exceptions. After looking at the specifics around who was denied access, I was able to see the account that was being denied access, it was the client machine administrator account. Well of course that was never going to work!!! After some quick Googling, the last error message above will lead you to edit the Local Group Policy on the client server. And although there are instructions from microsoft around doing this, it really will not work in this scenario. Notice the Description and how it only applices to authentication mentioned? Resolution I can tell you what I did, but I wish there was a better way but I simply don't know if it's duable any other way. Because my development environment had it's own DC, I didn't really want to mess with Kerberos authentication. I would also not be smart to connect that server to the domain, considering it has it's own DC. I ended up installing SharePoint 2010 Diagnostic Studio on another Windows 7 Dev environment I have, and connected the machien to the domain. I ran all the necesary remote credentials commands mentioned here. Those commands add the group policy for you! Once I did this I was able to authenticate properly and I was able to get the reports. Conclusion   You can run SharePoint 2010 Diagnostic Studio Remotely but it will require some specific scenarions. A couple of things I should mention is that as far as I understand, SP2010 DS, will install agents on your target environment to run tests and retrieve the data. I was a Farm Administrator, and also a Server Admin on SharePoint Server. I am not 100% sure if you need all those permissions but I that's just what I have to my internal intranet.   I deally I would like to have a machine that I can have SharePoint 2010 DIagnostic Studio installed and I can run that against client environments. It appears that I will not be able to do that, unless I enable Kerberos on my Windows 7 Machine now. If you have it installed in the same way I would like to have it, please let me know, I'll keep trying to get what I'm after. Hope this helps someone out there doing the same.

  Read the article

• Part 8: How to name EBS Customizations

  - by volker.eckardt(at)oracle.com

  You might wonder why I am discussing this here. The reason is simple: nearly every project has a bit different naming conventions, which makes a the life always a bit complicated (for developers, but also setup responsible, and also for consultants).  Although we always create a document to describe the technical object naming conventions, I have rarely seen a dedicated document  with functional naming conventions. To be precisely, from my stand point, there should always be one global naming definition for an implementation! Let me discuss some related questions: What is the best convention for the customization reference? How to name database objects (tables, packages etc.)? How to name functional objects like Value Sets, Concurrent Programs, etc. How to separate customizations from standard objects best? What is the best convention for the customization reference? The customization reference is the key you use to reference your customization from other lists, from the project plan etc. Usually it is something like XXHU_CONV_22 (HU=customer abbreviation, CONV=Conversion object #22) or XXFA_DEPRN_RPT_02 (FA=Fixed Assets, DEPRN=Short object group, here depreciation, RPT=Report, 02=2nd report in this area) As this is just a reference (not an object name yet), I would prefer the second option. XX=Customization, FA=Main EBS Module linked (you may have sometimes more, but FA is the main) DEPRN_RPT=Short name to specify the customization 02=a unique number Important here is that the HU isn’t used, because XX is enough to mark a custom object, and the 3rd+4th char can be used by the EBS module short name. How to name database objects (tables, packages etc.)? I was leading different developer teams, and I know that one common way is it to take the Customization reference and add more chars behind to classify the object (like _V for view and _T1 for triggers etc.). The only concern I have with this approach is the reusability. If you name your view XXFA_DEPRN_RPT_02_V, no one will by choice reuse this nice view, as it seams to be specific for this CEMLI. My suggestion is rather to name the view XXFA_DEPRN_PERIODS_V and allow herewith reusability for other CEMLIs (although the view will be deployed primarily with CEMLI package XXFA_DEPRN_RPT_02). (check also one of the following Blogs where I will talk about deployment.) How to name Value Sets, Concurrent Programs, etc. For Value Sets I would go with the same convention as for database objects, starting with XX<Module> …. For Concurrent Programs the situation is a bit different. This “object” is seen and used by a lot of users, and they will search for. In many projects it is common to start again with the company short name, or with XX. My proposal would differ. If you have created your own report and you name it “XX: Invoice Report”, the user has to remember that this report does not start with “I”, it starts with X. Would you like typing an X if you are looking for an Invoice report? No, you wouldn’t! So my advise would be to name it:   “Invoice Report (XXAP)”. Still we know it is custom (because of the XXAP), but the end user will type the key “i” to get it (and will see similar reports starting also with “i”). I hope that the general schema behind has now become obvious. How to separate customizations from standard objects best? I would not have this section here if the naming would not play an important role. Unfortunately, we can not always link a custom application to our own object, therefore the naming is really important. In the file system structure we use our $XXyy_TOP, in JAVA_TOP it is perhaps also “xx” in front. But in the database itself? Although there are different concepts in place, still many implementations are using the standard “apps” approach, means custom objects are stored in the apps schema (which should not cause any trouble). Final advise: review the naming conventions regularly, once a month. You may have to add more! And, publish them! To summarize: Technical and functional customized objects should always follow a naming convention. This naming convention should be project wide, and only one place shall be used to maintain (like in a Wiki). If the name is for the end user, rather put a customization identifier at the end; if it is an internal name, start with XX…

  Read the article

• Finding it Hard to Deliver Right Customer Experience: Think BPM!

  - by Ajay Khanna

  Our relationship with our customers is not a just a single interaction and we should not treat it like one. A customer’s relationship with a vendor is like a journey which starts way before customer makes a purchase and lasts long after that. The journey may start with customer researching a product that may lead to the eventual purchase and may continue with support or service needs for the product. A typical customer journey can be represented as shown below: As you may notice, customers tend to use multiple channels to interact with a company throughout their journey.  They also expect that they should get consistent experience, no matter what interaction channel they may choose. Customers do not like to repeat the information they have already provided and expect companies to remember their preferences, and offer them relevant products and services. If the company fails to meet this expectation, customers not only will abandon the purchase and go to the competitor but may also influence others’ purchase decision. Gone are the days when word of mouth was the only medium, and the customer could influence “Six” others. This is the age of social media and customer’s good or bad experience, especially bad get highly amplified and may influence hundreds of others. Challenges that face B2C companies today include: Delivering consistent experience: The reason that delivering consistent experience is challenging is due to fragmented data, disjointed systems and siloed multichannel interactions. Customers tend to get different service quality if they use web vs. phone vs. store. They get different responses from different service agents or get inconsistent answers if they call sales vs. service group in the company. Such inconsistent experiences result in lower customer satisfaction or NPS (net promoter score) numbers. Increasing Revenue: To stay competitive companies frequently introduce new products and services. Delay in launching such offerings has a significant impact on revenue realization. In addition to new product revenue, there are multiple opportunities to up-sell and cross-sell that impact bottom line. If companies are not able to identify such opportunities, bring a product to market quickly, or not offer the right product to the right customer at the right time, significant loss of revenue may occur. Ensuring Compliance: Companies must be compliant to ever changing regulations, these could be about Know Your Customer (KYC), Export/Import regulations, or taxation policies. In addition to government agencies, companies also need to comply with the SLA that they have committed to their customers. Lapse in meeting any of these requirements may lead to serious fines, penalties and loss in business. Companies have to make sure that they are in compliance will all such regulations and SLA commitments, at any given time. With the advent of social networks and mobile technology, companies not only need to focus on process efficiency but also on customer engagement. Improving engagement means delivering the customer experience as the customer is expecting and interacting with the customer at right time using right channel. Customers expect to be able to contact you via any channel of their choice (web, email, chat, mobile, social media), purchase via any viable channel (web, phone, store, mobile). Customers expect companies to understand their particular needs and remember their preferences on repeated visits. To deliver such an integrated, consistent, and contextual experience, power of BPM in must. Your company may be organized in departments like Marketing, Sales, Service. You may hold prospect data in SFA, order information in ERP, customer issues in CRM. However, the experience delivered to the customer must not be constrained by your system legacy. BPM helps in designing the right experience for the right customer and integrates all the underlining channels, systems, applications to make sure right information will be delivered to the right knowledge worker or to the customer every single time.     Orchestrating information across all systems (MDM, CRM, ERP), departments (commerce, merchandising, marketing service) and channels (Email, phone, web, social)  is the key, and that’s what BPM delivers. In addition to orchestrating systems and channels for consistency, BPM also provides an ability for analysis and decision management. By using data from historical transactions, social media and from other systems, users can determine the customer preferences, customer value, and churn propensity. This information, in the context, is then used while making a decision at a process step. Working with real-time decision management system can also suggest right up-sell or cross-sell offers, discounts or next-best-action steps for a particular customer. Timely action on customer issues or request is also a key tenet of a good customer experience. BPM’s complex event processing capabilities help companies to take proactive actions before issues get escalated. BPM system can be designed to listen to a certain event patters then deduce from those customer situations (credit card stolen, baggage lost, change of address) and do a triage before situation goes out of control. If such a situation arises you can send alerts to right people or immediately invoke corrective actions. Last but not least one of BPM’s key values is to drive continuous improvement. Learning about customers past experiences, interactions and social conversations, provide valuable insight. Such insight can be used to improve products, customer facing processes, and customer experience. You may take these insights as an input to design better more efficient and customer friendly sales, contact center or self-service processes. If customer experience is important for your business, make sure you have incorporated BPM as a part of your strategy to design, orchestrate and improve your customer facing processes.

  Read the article

• Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) is Available Now !

  - by Anand Akela

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Oracle today announced the availability of Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2). It is now available for download on OTN on ALL platforms. This is the first major release since the launch of Enterprise Manager 12c in October of 2011. This is the first time when Enterprise Manager release is available on all platforms simultaneously. This is primarily a stability release which incorporates many of issues and feedback reported by early adopters. In addition, this release contains many new features and enhancements in areas across the board. New Capabilities and Features Enhanced management capabilities for enterprise private clouds: Introduces new capabilities to allow customers to build and manage a Java Platform-as-a-Service (PaaS) cloud based on Oracle Weblogic Server. The new capabilities include guided set up of PaaS Cloud, self-service provisioning, automatic scale out and metering and chargeback. Enhanced lifecycle management capabilities for Oracle WebLogic Server environments: Combining in-context multiple domain, patching and configuration file synchronizations. Integrated Hardware-Software management for Oracle Exalogic Elastic Cloud through features such as rack schematics visualization and integrated monitoring of all hardware and software components. The latest management capabilities for business-critical applications include: Business Application Management: A new Business Application (BA) target type and dashboard with flexible definitions provides a logical view of an application’s business transactions, end-user experiences and the cloud infrastructure the monitored application is running on. Enhanced User Experience Reporting: Oracle Real User Experience Insight has been enhanced to provide reporting capabilities on client-side issues for applications running in the cloud and has been more tightly coupled with Oracle Business Transaction Management to help ensure that real-time user experience and transaction tracing data is provided to users in context. Several key improvements address ease of administration, reporting and extensibility for massively scalable cloud environments including dynamic groups, self-updateable monitoring templates, bulk operations against many events, etc. New and Revised Plug-Ins: Several plug-Ins have been updated as a part of this release resulting in either new versions or revisions. Revised plug-ins contain only bug-fixes and while new plug-ins incorporate both bug fixes as well as new functionality. Plug-In Name Version Enterprise Manager for Oracle Database 12.1.0.2 (revision) Enterprise Manager for Oracle Fusion Middleware 12.1.0.3 (new) Enterprise Manager for Chargeback and Capacity Planning 12.1.0.3 (new) Enterprise Manager for Oracle Fusion Applications 12.1.0.3 (new) Enterprise Manager for Oracle Virtualization 12.1.0.3 (new) Enterprise Manager for Oracle Exadata 12.1.0.3 (new) Enterprise Manager for Oracle Cloud 12.1.0.4 (new) Installation and Upgrade: All major platforms have been released simultaneously (Linux 32 / 64 bit, Solaris (SPARC), Solaris x86-64, IBM AIX 64-bit, and Windows x86-64 (64-bit) ) Enterprise Manager 12.1.0.2 is a complete release that includes both the EM OMS and Agent versions of 12.1.0.2. Installation options available with EM 12.1.0.2: User can do fresh Install or an upgrade from versions EM 10.2.0.5, 11.1, or 12.1.0.2 ( Bundle Patch 1 not mandatory). Upgrading to EM 12.1.0.2 from EM 12.1.0.1 is not a patch application (similar to Bundle Patch 1) but is achieved through a 1-system upgrade. Documentation: Oracle Enterprise Manager Cloud Control Introduction Document provides a broad overview of capabilities and highlights"What's New" in EM 12.1.0.2. All updated Oracle Enterprise Manager documentation can be found on OTN Upgrade Guide Please feel free to ask questions related to the new Oracle Enterprise Manager Cloud Control 12c Release 2 (12.1.0.2) at the Oracle Enterprise Manager Forum . You could also share your feedback at twitter  using hash tag #em12c or at Facebook . Stay Connected: Twitter |  Face book |  You Tube |  Linked in |  Newsletter

  Read the article

• Most Innovative IDM Projects: Awards at OpenWorld

  - by Tanu Sood

  On Tuesday at Oracle OpenWorld 2012, Oracle recognized the winners of Innovation Awards 2012 at a ceremony presided over by Hasan Rizvi, Executive Vice President at Oracle. Oracle Fusion Middleware Innovation Awards recognize customers for achieving significant business value through innovative uses of Oracle Fusion Middleware offerings. Winners are selected based on the uniqueness of their business case, business benefits, level of impact relative to the size of the organization, complexity and magnitude of implementation, and the originality of architecture. This year’s Award honors customers for their cutting-edge solutions driving business innovation and IT modernization using Oracle Fusion Middleware. The program has grown over the past 6 years, receiving a record number of nominations from customers around the globe. The winners were selected by a panel of judges that ranked each nomination across multiple different scoring categories. Congratulations to both Avea and ETS for winning this year’s Innovation Award for Identity Management. Identity Management Innovation Award 2012 Winner – Avea Company: Founded in 2004, AveA is the sole GSM 1800 mobile operator of Turkey and has reached a nationwide customer base of 12.8 million as of the end of 2011 Region: Turkey (EMEA) Products: Oracle Identity Manager, Oracle Identity Analytics, Oracle Access Management Suite Business Drivers: ·         To manage the agility and scale required for GSM Operations and enable call center efficiency by enabling agents to change their identity profiles (accounts and entitlements) rapidly based on call load. ·         Enhance user productivity and call center efficiency with self service password resets ·         Enforce compliance and audit reporting ·         Seamless identity management between AveA and parent company Turk Telecom Innovation and Results: ·         One of the first Sun2Oracle identity management migrations designed for high performance provisioning and trusted reconciliation built with connectors developed on the ICF architecture that provides custom user interfaces for  dynamic and rapid management of roles and entitlements along with entitlement level attestation using closed loop remediation between Oracle Identity Manager and Oracle Identity Analytics. ·         Dramatic reduction in identity administration and call center password reset tasks leading to 20% reduction in administration costs and 95% reduction in password related calls. ·         Enhanced user productivity by up to 25% to date ·         Enforced enterprise security and reduced risk ·         Cost-effective compliance management ·         Looking to seamlessly integrate with parent and sister companies’ infrastructure securely. Identity Management Innovation Award 2012 Winner – Education Testing Service (ETS)       See last year's winners here --Company: ETS is a private nonprofit organization devoted to educational measurement and research, primarily through testing. Region: U.S.A (North America) Products: Oracle Access Manager, Oracle Identity Federation, Oracle Identity Manager Business Drivers: ETS develops and administers more than 50 million achievement and admissions tests each year in more than 180 countries, at more than 9,000 locations worldwide.  As the business becomes more globally based, having a robust solution to security and user management issues becomes paramount. The organizations was looking for: ·         Simplified user experience for over 3000 company users and more than 6 million dynamic student and staff population ·         Infrastructure and administration cost reduction ·         Managing security risk by controlling 3rd party access to ETS systems ·         Enforce compliance and manage audit reporting ·         Automate on-boarding and decommissioning of user account to improve security, reduce administration costs and enhance user productivity ·         Improve user experience with simplified sign-on and user self service Innovation and Results: 1.    Manage Risk ·         Centralized system to control user access ·         Provided secure way of accessing service providers' application using federated SSO. ·         Provides reporting capability for auditing, governance and compliance. 2.    Improve efficiency ·         Real-Time provisioning to target systems ·         Centralized provisioning system for user management and access controls. ·         Enabling user self services. 3.    Reduce cost ·         Re-using common shared services for provisioning, SSO, Access by application reducing development cost and time. ·         Reducing infrastructure and maintenance cost by decommissioning legacy/redundant IDM services. ·         Reducing time and effort to implement security functionality in business applications (“onboard” instead of new development). ETS was able to fold in new and evolving requirement in addition to the initial stated goals realizing quick ROI and successfully meeting business objectives. Congratulations to the winners once again. We will be sure to bring you more from these Innovation Award winners over the next few months.

  Read the article

• ROracle support for TimesTen In-Memory Database

  - by Sherry LaMonica

  Today's guest post comes from Jason Feldhaus, a Consulting Member of Technical Staff in the TimesTen Database organization at Oracle.  He shares with us a sample session using ROracle with the TimesTen In-Memory database.  Beginning in version 1.1-4, ROracle includes support for the Oracle Times Ten In-Memory Database, version 11.2.2. TimesTen is a relational database providing very fast and high throughput through its memory-centric architecture.  TimesTen is designed for low latency, high-volume data, and event and transaction management. A TimesTen database resides entirely in memory, so no disk I/O is required for transactions and query operations. TimesTen is used in applications requiring very fast and predictable response time, such as real-time financial services trading applications and large web applications. TimesTen can be used as the database of record or as a relational cache database to Oracle Database. ROracle provides an interface between R and the database, providing the rich functionality of the R statistical programming environment using the SQL query language. ROracle uses the OCI libraries to handle database connections, providing much better performance than standard ODBC.The latest ROracle enhancements include: Support for Oracle TimesTen In-Memory Database Support for Date-Time using R's POSIXct/POSIXlt data types RAW, BLOB and BFILE data type support Option to specify number of rows per fetch operation Option to prefetch LOB data Break support using Ctrl-C Statement caching support Times Ten 11.2.2 contains enhanced support for analytics workloads and complex queries: Analytic functions: AVG, SUM, COUNT, MAX, MIN, DENSE_RANK, RANK, ROW_NUMBER, FIRST_VALUE and LAST_VALUE Analytic clauses: OVER PARTITION BY and OVER ORDER BY Multidimensional grouping operators: Grouping clauses: GROUP BY CUBE, GROUP BY ROLLUP, GROUP BY GROUPING SETS Grouping functions: GROUP, GROUPING_ID, GROUP_ID WITH clause, which allows repeated references to a named subquery block Aggregate expressions over DISTINCT expressions General expressions that return a character string in the source or a pattern within the LIKE predicate Ability to order nulls first or last in a sort result (NULLS FIRST or NULLS LAST in the ORDER BY clause) Note: Some functionality is only available with Oracle Exalytics, refer to the TimesTen product licensing document for details. Connecting to TimesTen is easy with ROracle. Simply install and load the ROracle package and load the driver. > install.packages("ROracle") > library(ROracle) Loading required package: DBI > drv <- dbDriver("Oracle") Once the ROracle package is installed, create a database connection object and connect to a TimesTen direct driver DSN as the OS user. > conn <- dbConnect(drv, username ="", password="", dbname = "localhost/SampleDb_1122:timesten_direct") You have the option to report the server type - Oracle or TimesTen? > print (paste ("Server type =", dbGetInfo (conn)$serverType)) [1] "Server type = TimesTen IMDB" To create tables in the database using R data frame objects, use the function dbWriteTable. In the following example we write the built-in iris data frame to TimesTen. The iris data set is a small example data set containing 150 rows and 5 columns. We include it here not to highlight performance, but so users can easily run this example in their R session. > dbWriteTable (conn, "IRIS", iris, overwrite=TRUE, ora.number=FALSE) [1] TRUE Verify that the newly created IRIS table is available in the database. To list the available tables and table columns in the database, use dbListTables and dbListFields, respectively. > dbListTables (conn) [1] "IRIS" > dbListFields (conn, "IRIS") [1] "SEPAL.LENGTH" "SEPAL.WIDTH" "PETAL.LENGTH" "PETAL.WIDTH" "SPECIES" To retrieve a summary of the data from the database we need to save the results to a local object. The following call saves the results of the query as a local R object, iris.summary. The ROracle function dbGetQuery is used to execute an arbitrary SQL statement against the database. When connected to TimesTen, the SQL statement is processed completely within main memory for the fastest response time. > iris.summary <- dbGetQuery(conn, 'SELECT SPECIES, AVG ("SEPAL.LENGTH") AS AVG_SLENGTH, AVG ("SEPAL.WIDTH") AS AVG_SWIDTH, AVG ("PETAL.LENGTH") AS AVG_PLENGTH, AVG ("PETAL.WIDTH") AS AVG_PWIDTH FROM IRIS GROUP BY ROLLUP (SPECIES)') > iris.summary SPECIES AVG_SLENGTH AVG_SWIDTH AVG_PLENGTH AVG_PWIDTH 1 setosa 5.006000 3.428000 1.462 0.246000 2 versicolor 5.936000 2.770000 4.260 1.326000 3 virginica 6.588000 2.974000 5.552 2.026000 4 <NA> 5.843333 3.057333 3.758 1.199333 Finally, disconnect from the TimesTen Database. > dbCommit (conn) [1] TRUE > dbDisconnect (conn) [1] TRUE We encourage you download Oracle software for evaluation from the Oracle Technology Network. See these links for our software: Times Ten In-Memory Database,  ROracle.  As always, we welcome comments and questions on the TimesTen and  Oracle R technical forums.

  Read the article

• Problem with deleting table rows using ctrl+a for row selection

  - by Frank Nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} The following code is commonly shown and documented for how to access the row key of selected table rows in an ADF Faces table configured for multi row selection. public void onRemoveSelectedTableRows(ActionEvent actionEvent) {    RichTable richTable = … get access to your table instance …    CollectionModel cm =(CollectionModel)richTable.getValue();    RowKeySet rowKeySet = (RowKeySet)richTable.getSelectedRowKeys();             for (Object key : rowKeySet) {       richTable.setRowKey(key);       JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();       // do something with rowData e.g.update, print, copy   }    //optional, if you changed data, refresh the table         AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance(); adfFacesContext.addPartialTarget(richTable);   return null; } The code shown above works for 99.5 % of all use cases that deal with multi row selection enabled ADF Faces tables, except for when users use the ctrl+a key to mark all rows for delete. Just to make sure I am clear: if you use ctrl+a to mark rows to perform any other operation on them – like bulk updating all rows for a specific attribute – then this works with the code shown above. Even for bulk row delete, any other mean of row selection (shift+click and multiple ctrl+click) works like a charm and the rows are deleted. So apparently it is the use of ctrl+a that causes the problem when deleting multiple rows of an ADF Faces table. To implement code that works for all table selection use cases, including the one to delete all table rows in one go, you use the code shown below. public void onRemoveSelectedTableRows(ActionEvent actionEvent) {   RichTable richTable = … get access to your table instance …   CollectionModel cm = (CollectionModel)richTable.getValue();   RowKeySet rowKeySet = (RowKeySet)richTable.getSelectedRowKeys();   Object[] rowKeySetArray = rowKeySet.toArray();      for (Object key : rowKeySetArray){               richTable.setRowKey(key);     JUCtrlHierNodeBinding rowData = (JUCtrlHierNodeBinding)cm.getRowData();                              rowData.getRow().remove();   }   AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance();          adfFacesContext.addPartialTarget(richTable); }

  Read the article

• Using Resources the Right Way

  - by BuckWoody

  It’s an interesting time in computing technology. At one point there was a dearth of information available for solving a given problem, or educating ourselves on broader topics so that we can solve problems in the future. With dozens, perhaps hundreds or thousands of web sites and content available (for free, in many cases) from vendors, peers, even colleges and universities, it seems like there is actually too much information. Who has the time to absorb all this information and training? Even if you had the inclination, where to start? In fact, it seems so overwhelming that I often hear people saying that they can’t find the training they need, or that vendor X or Y “doesn’t help their users”. On questioning these folks, however, I often find that they – and sometimes I - haven’t put in the effort to learn what resources we have. That’s where blogs, like this one, can help. If you follow a blog, either by checking it often or perhaps subscribing to the Really Simple Syndication (RSS) feed, you’ll be able to spread out the search or create a mental filter for the information you need. But it’s not enough just read a blog or a web page. The creators need real feedback – what doesn’t work, and what does. Yes, you’re allowed to tell a vendor or writer “This helped me because…” so that you reinforce the positives. To be sure, bring up what doesn’t work as well –  that’s fine. But be specific, and be constructive. You’d be surprised at how much it matters. I know for a fact at Microsoft we listen – there is a real live person that reads your comments. I’m sure this is true of other vendors, and I also know that most blog authors – yours truly most especially – wants to know what you think.   In this blog entry I’d to call your attention to three resources you have at your disposal, and how you can use them to help. I’ll try to bring up things like this from time to time that I find useful, and cover in them in more depth like this. Think of this as a synopsis of a longer set of resources that you can use to filter whether you want to research further, bookmark, or forward on to a circle of friends where you think it might help them.   Data Driven Design Concepts http://msdn.microsoft.com/en-us/library/windowsazure/jj156154 I’ll start with a great site that walks you through the process of designing a solution from a data-first perspective. As you know, I believe all computing is merely re-arranging data. If you follow that logic as well, you’ll realize that whenever you create a solution, you should start at the data-end of the application. This resource helps you do that. Even if you don’t use the specific technologies the instructions use, the concepts hold for almost any other technology that deals with data. This should be a definite bookmark for a developer, DBA, or Data Architect. When I mentioned my admiration for this resource here at Microsoft, the team that created it contacted me and asked if I’d share an e-mail address to my readers so that you can comment on it. You’re guaranteed to be heard – you can suggest changes, talk about how useful – or not – it is, and so on. Here’s that address:  [email protected]   End-to-End Example of a complete Hybrid Application – with Live Demo https://azurestocktrader.cloudapp.net/Default.aspx I learn by example. I also like having ready-made, live, functional demos that show the completed solution at work. If you’ve ever wanted to learn how a complex, complete, hybrid application that bridges on-premises systems with cloud-based databases, code, functions and more, this is it. It’s a stock-trading simulator, and you can get everything from the design to the code itself, or you can just play with the application. It’s running on Windows Azure, the actual production servers we use for everything else. Using a Cloud-Based Service https://azureconfigweb.cloudapp.net/Default.aspx Along with that stock-trading application, you have a full demonstration and usable code sample of a web-based service available. If you’re a developer, this is a style of code you need to understand for everything from iPhone development to a full Service-Oriented Architecture (SOA) environment. So check out these resources. I’ll post more from time to time as I run across them. Hopefully they’ll be as useful to you as they are to me. Oh, and if you have a comment on any of the resources, let them know. And if you have any comments about these or any of my entries, feel free to post away. To quote a famous TV Show: “Hello Seattle – I’m listening…”

  Read the article

• Rebuilding CoasterBuzz, Part IV: Dependency injection, it's what's for breakfast

  - by Jeff

  (Repost from my personal blog.) This is another post in a series about rebuilding one of my Web sites, which has been around for 12 years. I hope to relaunch soon. More: Part I: Evolution, and death to WCF Part II: Hot data objects Part III: The architecture using the "Web stack of love" If anything generally good for the craft has come out of the rise of ASP.NET MVC, it's that people are more likely to use dependency injection, and loosely couple the pieces parts of their applications. A lot of the emphasis on coding this way has been to facilitate unit testing, and that's awesome. Unit testing makes me feel a lot less like a hack, and a lot more confident in what I'm doing. Dependency injection is pretty straight forward. It says, "Given an instance of this class, I need instances of other classes, defined not by their concrete implementations, but their interfaces." Probably the first place a developer exercises this in when having a class talk to some kind of data repository. For a very simple example, pretend the FooService has to get some Foo. It looks like this: public class FooService {    public FooService(IFooRepository fooRepo)    {       _fooRepo = fooRepo;    }    private readonly IFooRepository _fooRepo;    public Foo GetMeFoo()    {       return _fooRepo.FooFromDatabase();    } } When we need the FooService, we ask the dependency container to get it for us. It says, "You'll need an IFooRepository in that, so let me see what that's mapped to, and put it in there for you." Why is this good for you? It's good because your FooService doesn't know or care about how you get some foo. You can stub out what the methods and properties on a fake IFooRepository might return, and test just the FooService. I don't want to get too far into unit testing, but it's the most commonly cited reason to use DI containers in MVC. What I wanted to mention is how there's another benefit in a project like mine, where I have to glue together a bunch of stuff. For example, when I have someone sign up for a new account on CoasterBuzz, I'm actually using POP Forums' new account mailer, which composes a bunch of text that includes a link to verify your account. The thing is, I want to use custom text and some other logic that's specific to CoasterBuzz. To accomplish this, I make a new class that inherits from the forum's NewAccountMailer, and override some stuff. Easy enough. Then I use Ninject, the DI container I'm using, to unbind the forum's implementation, and substitute my own. Ninject uses something called a NinjectModule to bind interfaces to concrete implementations. The forum has its own module, and then the CoasterBuzz module is loaded second. The CB module has two lines of code to swap out the mailer implementation: Unbind<PopForums.Email.INewAccountMailer>(); Bind<PopForums.Email.INewAccountMailer>().To<CbNewAccountMailer>(); Piece of cake! Now, when code asks the DI container for an INewAccountMailer, it gets my custom implementation instead. This is a lot easier to deal with than some of the alternatives. I could do some copy-paste, but then I'm not using well-tested code from the forum. I could write stuff from scratch, but then I'm throwing away a bunch of logic I've already written (in this case, stuff around e-mail, e-mail settings, mail delivery failures). There are other places where the DI container comes in handy. For example, CoasterBuzz does a number of custom things with user profiles, and special content for paid members. It uses the forum as the core piece to managing users, so I can ask the container to get me instances of classes that do user lookups, for example, and have zero care about how the forum handles database calls, configuration, etc. What a great world to live in, compared to ten years ago. Sure, the primary interest in DI is around the "separation of concerns" and facilitating unit testing, but as your library grows and you use more open source, it starts to be the glue that pulls everything together.

  Read the article

• A Patent for Workload Management Based on Service Level Objectives

  - by jsavit

  I'm very pleased to announce that after a tiny :-) wait of about 5 years, my patent application for a workload manager was finally approved. Background Many operating systems have a resource manager which lets you control machine resources. For example, Solaris provides controls for CPU with several options: shares for proportional CPU allocation. If you have twice as many shares as me, and we are competing for CPU, you'll get about twice as many CPU cycles), dedicated CPU allocation in which a number of CPUs are exclusively dedicated to an application's use. You can say that a zone or project "owns" 8 CPUs on a 32 CPU machine, for example. And, capped CPU in which you specify the upper bound, or cap, of how much CPU an application gets. For example, you can throttle an application to 0.125 of a CPU. (This isn't meant to be an exhaustive list of Solaris RM controls.) Workload management Useful as that is (and tragic that some other operating systems have little resource management and isolation, and frighten people into running only 1 app per OS instance - and wastefully size every server for the peak workload it might experience) that's not really workload management. With resource management one controls the resources, and hope that's enough to meet application service objectives. In fact, we hold resource distribution constant, see if that was good enough, and adjust resource distribution if that didn't meet service level objectives. Here's an example of what happens today: Let's try 30% dedicated CPU. Not enough? Let's try 80% Oh, that's too much, and we're achieving much better response time than the objective, but other workloads are starving. Let's back that off and try again. It's not the process I object to - it's that we to often do this manually. Worse, we sometimes identify and adjust the wrong resource and fiddle with that to no useful result. Back in my days as a customer managing large systems, one of my users would call me up to beg for a "CPU boost": Me: "it won't make any difference - there's plenty of spare CPU to be had, and your application is completely I/O bound." User: "Please do it anyway." Me: "oh, all right, but it won't do you any good." (I did, because he was a friend, but it didn't help.) Prior art There are some operating environments that take a stab about workload management (rather than resource management) but I find them lacking. I know of one that uses synthetic "service units" composed of the sum of CPU, I/O and memory allocations multiplied by weighting factors. A workload is set to make a target rate of service units consumed per second. But this seems to be missing a key point: what is the relationship between artificial 'service units' and actually meeting a throughput or response time objective? What if I get plenty of one of the components (so am getting enough service units), but not enough of the resource whose needed to remove the bottleneck? Actual workload management That's not really the answer either. What is needed is to specify a workload's service levels in terms of externally visible metrics that are meaningful to a business, such as response times or transactions per second, and have the workload manager figure out which resources are not being adequately provided, and then adjust it as needed. If an application is not meeting its service level objectives and the reason is that it's not getting enough CPU cycles, adjust its CPU resource accordingly. If the reason is that the application isn't getting enough RAM to keep its working set in memory, then adjust its RAM assignment appropriately so it stops swapping. Simple idea, but that's a task we keep dumping on system administrators. In other words - don't hold the number of CPU shares constant and watch the achievement of service level vary. Instead, hold the service level constant, and dynamically adjust the number of CPU shares (or amount of other resources like RAM or I/O bandwidth) in order to meet the objective. Instrumenting non-instrumented applications There's one little problem here: how do I measure application performance in a way relating to a service level. I don't want to do it based on internal resources like number of CPU seconds it received per minute - We need to make resource decisions based on externally visible and meaningful measures of performance, not synthetic items or internal resource counters. If I have a way of marking the beginning and end of a transaction, I can then measure whether or not the application is meeting an objective based on it. If I can observe the delay factors for an application, I can see which resource shortages are slowing an application enough to keep it from meeting its objectives. I can then adjust resource allocations to relieve those shortages. Fortunately, Solaris provides facilities for both marking application progress and determining what factors cause application latency. The Solaris DTrace facility let's me introspect on application behavior: in particular I can see events like "receive a web hit" and "respond to that web hit" so I can get transaction rate and response time. DTrace (and tools like prstat) let me see where latency is being added to an application, so I know which resource to adjust. Summary After a delay of a mere few years, I am the proud creator of a patent (advice to anyone interested in going through the process: don't hold your breath!). The fundamental idea is fairly simple: instead of holding resource constant and suffering variable levels of success meeting service level objectives, properly characterise the service level objective in meaningful terms, instrument the application to see if it's meeting the objective, and then have a workload manager change resource allocations to remove delays preventing service level attainment. I've done it by hand for a long time - I think that's what a computer should do for me.

  Read the article

• My Feelings About Microsoft Surface

  - by Valter Minute

  Advice: read the title carefully, I’m talking about “feelings” and not about advanced technical points proved in a scientific and objective way I still haven’t had a chance to play with a MS Surface tablet (I would love to, of course) and so my ideas just came from reading different articles on the net and MS official statements. Remember also that the MVP motto begins with “Independent” (“Independent Experts. Real World Answers.”) and this is just my humble opinion about a product and a technology. I know that, being an MS MVP you can be called an “MS-fanboy”, I don’t care, I hope that people can appreciate my opinion, even if it doesn’t match theirs. The “Surface” brand can be confusing for techies that knew the “original” surface concept but I think that will be a fresh new brand name for most of the people out there. But marketing department are here to confuse people… so I can understand this “recycle” of an existing name. So Microsoft is entering the hardware arena… for me this is good news. Microsoft developed some nice hardware in the past: the xbox, zune (even if the commercial success was quite limited) and, last but not least, the two arc mices (old and new model) that I use and appreciate. In the past Microsoft worked with OEMs and that model lead to good and bad things. Good thing (for microsoft, at least) is market domination by windows-based PCs that only in the last years has been reduced by the return of the Mac and tablets. Google is also moving in the hardware business with its acquisition of Motorola, and Apple leveraged his control of both the hardware and software sides to develop innovative products. Microsoft can scare OEMs and make them fly away from windows (but where?) or just lead the pack, showing how devices should be designed to compete in the market and bring back some of the innovation that disappeared from recent PC products (look at the shelves of your favorite electronics store and try to distinguish a laptop between the huge mass of anonymous PCs on displays… only Macs shine out there…). Having to compete with MS “official” hardware will force OEMs to develop better product and bring back some real competition in a market that was ruled only by prices (the lower the better even when that means low quality) and no innovative features at all (when it was the last time that a new PC surprised you?). Moving into a new market is a big and risky move, but with Windows 8 Microsoft is playing a crucial move for its future, trying to be back in the innovation run against apple and google. MS can’t afford to fail this time. I saw the new devices (the WinRT and Pro) and the specifications are scarce, misleading and confusing. The first impression is that the device looks like an iPad with a nice keyboard cover… Using “HD” and “full HD” to define display resolution instead of using the real figures and reviving the “ClearType” brand (now dead on Win8 as reported here and missed by people who hate to read text on displays, like myself) without providing clear figures (couldn’t you count those damned pixels?) seems to imply that MS was caught by surprise by apple recent “retina” displays that brought very high definition screens on tablets.Also there are no specifications about the processors used (even if some sources report NVidia Tegra for the ARM tablet and i5 for the x86 one) and expected battery life (a critical point for tablets and the point that killed Windows7 x86 based tablets). Also nothing about the price, and this will be another critical point because other platform out there already provide lots of applications and have a good user base, if MS want to enter this market tablets pricing must be competitive. There are some expansion ports (SD and USB), so no fixed storage model (even if the specs talks about 32-64GB for RT and 128-256GB for pro). I like this and don’t like the apple model where flash memory (that it’s dirt cheap used in thumdrives or SD cards) is as expensive as gold (or cocaine to have a more accurate per gram measurement) when mounted inside a tablet/phone. For big files you’ll be able to use external media and an SD card could be used to store files that don’t require super-fast SSD-like access times, I hope. To be honest I really don’t like the marketplace model and the limitation of Windows RT APIs (no local database? from a company that based a good share of its success on VB6+Access!) and lack of desktop support on the ARM (even if the support is here and has been used to port office). It’s a step toward the consumer market (where competitors are making big money), but may impact enterprise (and embedded) users that may not appreciate Windows 8 new UI or the limitations of the new app model (if you aren’t connected you are dead ). Not having compatibility with the desktop will require brand new applications and honestly made all the CPU cycles spent to convert .NET IL into real machine code in the past like a huge waste of time… as soon as a new processor architecture is supported by Windows you still have to rewrite part of your application (and MS is pushing HTML5+JS and native code more than .NET in my perception). On the other side I believe that the development experience provided by Visual Studio is still miles (or kilometres) ahead of the competition and even the all-uppercase menu of VS2012 hasn’t changed this situation. The new metro UI got mixed reviews. On my side I should say that is very pleasant to use on a touch screen, I like the minimalist design (even if sometimes is too minimal and hides stuff that, in my opinion, should be visible) but I should also say that using it with mouse and keyboard is like trying to pick your nose with boxing gloves… Metro is also very interesting for embedded devices where touch screen usage is quite common and where having an application taking all the screen is the norm. For devices like kiosks, vending machines etc. this kind of UI can be a great selling point. I don’t need a new tablet (to be honest I’m pretty happy with my wife’s iPad and with my PC), but I may change my opinion after having a chance to play a little bit with those new devices and understand what’s hidden under all this mysterious and generic announcements and specifications!

  Read the article

• 7-Eleven Improves the Digital Guest Experience With 10-Minute Application Provisioning

  - by MichaelM-Oracle

  By Vishal Mehra - Director, Cloud Computing, Oracle Consulting Making the Cloud Journey Matter There’s much more to cloud computing than cutting costs and closing data centers. In fact, cloud computing is fast becoming the engine for innovation and productivity in the digital age. Oracle Consulting Services contributes to our customers’ cloud journey by accelerating application provisioning and rapidly deploying enterprise solutions. By blending flexibility with standardization, our Middleware as a Service (MWaaS) offering is ensuring the success of many cloud initiatives. 10-Minute Application Provisioning Times at 7-Eleven As a case in point, 7-Eleven recently highlighted the scope, scale, and results of a cloud-powered environment. The world’s largest convenience store chain is rolling out a Digital Guest Experience (DGE) program across 8,500 stores in the U.S. and Canada. Everyday, 7-Eleven connects with tens of millions of customers through point-of-sale terminals, web sites, and mobile apps. Promoting customer loyalty, targeting promotions, downloading digital coupons, and accepting digital payments are all part of the roadmap for a comprehensive and rewarding customer experience. And what about the time required for deploying successive versions of this mission-critical solution? Ron Clanton, 7-Eleven's DGE Program Manager, Information Technology reported at Oracle Open World, " We are now able to provision new environments in less than 10 minutes. This includes the complete SOA Suite on Exalogic, and Enterprise Manager managing both the SOA Suite, Exalogic, and our Exadata databases ." OCS understands the complex nature of innovative solutions and has processes and expertise to help clients like 7-Eleven rapidly develop technology that enhances the customer experience with little more than the click of a button. OCS understood that the 7-Eleven roadmap required careful planning, agile development, and a cloud-capable environment to move fast and perform at enterprise scale. Business Agility Today’s business-savvy technology leaders face competing priorities as they confront the digital disruptions of the mobile revolution and next-generation enterprise applications. To support an innovation agenda, IT is required to balance competing priorities between development and operations groups. Standardization and consolidation of computing resources are the keys to success. With our operational and technical expertise promoting business agility, Oracle Consulting's deep Middleware as a Service experience can make a significant difference to our clients by empowering enterprise IT organizations with the computing environment they seek to keep up with the pace of change that digitally driven business units expect. Depending on the needs of the organization, this environment runs within a private, public, or hybrid cloud infrastructure. Through on-demand access to a shared pool of configurable computing resources, IT delivers the standard tools and methods for developing, integrating, deploying, and scaling next-generation applications. Gold profiles of predefined configurations eliminate the version mismatches among databases, application servers, and SOA suite components, delivered both by Oracle and other enterprise ISVs. These computing resources are well defined in business terms, enabling users to select what they need from a service catalog. Striking the Balance between Development and Operations As a result, development groups have the flexibility to choose among a menu of available services with descriptions of standard business functions, service level guarantees, and costs. Faced with the consumerization of enterprise IT, they can deliver the innovative customer experiences that seamlessly integrate with underlying enterprise applications and services. This cloud-powered development and testing environment accelerates release cycles to ensure agile development and rapid deployments. At the same time, the operations group is relying on certified stacks and frameworks, tuned to predefined environments and patterns. Operators can maintain a high level of security, and continue best practices for applications/systems monitoring and management. Moreover, faced with the challenges of delivering on service level agreements (SLAs) with the business units, operators can ensure performance, scalability, and reliability of the infrastructure. The elasticity of a cloud-computing environment – the ability to rapidly add virtual machines and storage in response to computing demands -- makes a difference for hardware utilization and efficiency. Contending with Continuous Change What does it take to succeed on the promise of the cloud? As the engine for innovation and productivity in the digital age, IT must face not only the technical transformations but also the organizational challenges of the cloud. Standardizing key technologies, resources, and services through cloud computing is only one part of the cloud journey. Managing relationships among multiple department and projects over time – developing the management, governance, and monitoring capabilities within IT – is an often unmentioned but all too important second part. In fact, IT must have the organizational agility to contend with continuous change. This is where a skilled consulting services partner can play a pivotal role as a trusted advisor in the successful adoption of cloud solutions. With a lifecycle services approach to delivering innovative business solutions, Oracle Consulting Services has expertise and a portfolio of services to help enterprise customers succeed on their cloud journeys as well as other converging mega trends .

  Read the article

• SQL SERVER – Backing Up and Recovering the Tail End of a Transaction Log – Notes from the Field #042

  - by Pinal Dave

  [Notes from Pinal]: The biggest challenge which people face is not taking backup, but the biggest challenge is to restore a backup successfully. I have seen so many different examples where users have failed to restore their database because they made some mistake while they take backup and were not aware of the same. Tail Log backup was such an issue in earlier version of SQL Server but in the latest version of SQL Server, Microsoft team has fixed the confusion with additional information on the backup and restore screen itself. Now they have additional information, there are a few more people confused as they have no clue about this. Previously they did not find this as a issue and now they are finding tail log as a new learning. Linchpin People are database coaches and wellness experts for a data driven world. In this 42nd episode of the Notes from the Fields series database expert Tim Radney (partner at Linchpin People) explains in a very simple words, Backing Up and Recovering the Tail End of a Transaction Log. Many times when restoring a database over an existing database SQL Server will warn you about needing to make a tail end of the log backup. This might be your reminder that you have to choose to overwrite the database or could be your reminder that you are about to write over and lose any transactions since the last transaction log backup. You might be asking yourself “What is the tail end of the transaction log”. The tail end of the transaction log is simply any committed transactions that have occurred since the last transaction log backup. This is a very crucial part of a recovery strategy if you are lucky enough to be able to capture this part of the log. Most organizations have chosen to accept some amount of data loss. You might be shaking your head at this statement however if your organization is taking transaction logs backup every 15 minutes, then your potential risk of data loss is up to 15 minutes. Depending on the extent of the issue causing you to have to perform a restore, you may or may not have access to the transaction log (LDF) to be able to back up those vital transactions. For example, if the storage array or disk that holds your transaction log file becomes corrupt or damaged then you wouldn’t be able to recover the tail end of the log. If you do have access to the physical log file then you can still back up the tail end of the log. In 2013 I presented a session at the PASS Summit called “The Ultimate Tail Log Backup and Restore” and have been invited back this year to present it again. During this session I demonstrate how you can back up the tail end of the log even after the data file becomes corrupt. In my demonstration I set my database offline and then delete the data file (MDF). The database can’t become more corrupt than that. I attempt to bring the database back online to change the state to RECOVERY PENDING and then backup the tail end of the log. I can do this by specifying WITH NO_TRUNCATE. Using NO_TRUNCATE is equivalent to specifying both COPY_ONLY and CONTINUE_AFTER_ERROR. It as its name says, does not try to truncate the log. This is a great demo however how could I achieve backing up the tail end of the log if the failure destroys my entire instance of SQL and all I had was the LDF file? During my demonstration I also demonstrate that I can attach the log file to a database on another instance and then back up the tail end of the log. If I am performing proper backups then my most recent full, differential and log files should be on a server other than the one that crashed. I am able to achieve this task by creating new database with the same name as the failed database. I then set the database offline, delete my data file and overwrite the log with my good log file. I attempt to bring the database back online and then backup the log with NO_TRUNCATE just like in the first example. I encourage each of you to view my blog post and watch the video demonstration on how to perform these tasks. I really hope that none of you ever have to perform this in production, however it is a really good idea to know how to do this just in case. It really isn’t a matter of “IF” you will have to perform a restore of a production system but more of a “WHEN”. Being able to recover the tail end of the log in these sever cases could be the difference of having to notify all your business customers of data loss or not. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Note: Tim has also written an excellent book on SQL Backup and Recovery, a must have for everyone. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Web Services Example - Part 2: Programmatic

  - by Denis T

  In this edition of the ADF Mobile blog we'll tackle part 2 of our Web Service examples.  In this posting we'll take a look at using a SOAP Web Service but calling it programmatically in code and parsing the return into a bean. Getting the sample code: Just click here to download a zip of the entire project.  You can unzip it and load it into JDeveloper and deploy it either to iOS or Android.  Please follow the previous blog posts if you need help getting JDeveloper or ADF Mobile installed.  Note: This is a different workspace than WS-Part1 Defining our Web Service: Just like our first installment, we are using the same public weather forecast web service provided free by CDYNE Corporation.  Sometimes this service goes down so please ensure you know it's up before reporting this example isn't working. We're going to concentrate on the same two web service methods, GetCityForecastByZIP and GetWeatherInformation. Defing the Application: The application setup is identical to the Weather1 version.  There are some improvements to the data that is displayed as part of this example though.  Now we are able to show the associated image along with each forecast line when using the Forecast By Zip feature.  We've also added the temperature Hi/Low values into the UI. Summary of Fundamental Changes In This Application The most fundamental change is that we're binding the UI to the Bean Data Controls instead of directly to the Web Service Data Controls.  This gives us much more flexibility to control the shape of the data and allows us to do caching of the data outside of the Web Service.  This way if your application is, say offline, your bean could still populate with data from a local cache and still show you some UI as opposed to completely failing because you don't have any connectivity. In general we promote this type of programming technique with ADF Mobile to insulate your application from any issues with network connectivity. What's different with this example? We have setup the Web Service DC the same way but now we have managed beans to process the data.  The following classes define the "Model" of our application:  CityInformation-CityForecast-Forecast, WeatherInformation-WeatherDescription.  We use WeatherBean for UI interaction to the model layer.  If you look through this example, we don't really do that much with the java code except use it to grab the image URL from the weather description.  In a more realistic example, you might be using some JDBC classes to persist the data to a local database. To have a good architecture it is always good to keep your model and UI layers separate.  This gets muddied if you start to use bindings on a page invoked from Java code and this java code starts to become your "model" layer.  Since bindings are page specific, your model layer starts to become entwined with your UI.  Not good!  To help with this, we've added some utility functions that let you invoke DC methods without having a binding and thus execute methods from your "model" layer without requiring a binding in your page definition.  We do this with the invokeDataControlMethod of the AdfmfJavaUtilities class.  An example of this method call is available in line 95 of WeatherInformation.java and line 93 of CityInformation.Java. What's a GenericType? Because Web Service Data Controls (and also URL Data Controls AKA REST) use generic name/value pairs to define their structure and don't have strongly typed objects, these are actually stored internally as GenericType objects.  The GenericType class is simply a property map of name/value pairs that can be hierarchical.  There are methods like getAttribute where you supply the index of the attribute or it's string property name.  Why is this important to know?  Because invokeDataControlMethod returns GenericType objects and developers either need to parse these GenericType objects themselves or use one of our helper functions. GenericTypeBeanSerializationHelper This class does exactly what it's name implies.  It's a helper class for developers to aid in serialization of GenericTypes to/from java objects.  This is extremely handy if you have a large GenericType object with many attributes (or you're just lazy like me!) and you just want to parse it out into a real java object you can use more easily.  Here you would use the fromGenericType method.  This method takes the class of the Java object you wish to return and the GenericType as parameters.  The method then parses through each attribute in the GenericType and uses reflection to set that same attribute in the Java class.  Then the method returns that new object of the class you specified.  This is obviously very handy to avoid a lot of shuffling code between GenericType and your own Java classes.  The reverse method, toGenericType is also available when you want to go the other way.  In this case you supply the string that represents the package location in the DataControl definition (Example: "MyDC.myParams.MyCollection") and then pass in the Java object you have that holds the data and a GenericType is returned to you.  Again, it will use reflection to calculate the attributes that match between the java class and the GenericType and call the getters/setters on those. Issues and Possible Improvements: In the next installment we'll show you how to make your web service calls asynchronously so your UI will fill dynamically when the service call returns but in the meantime you show the data you have locally in your bean fed from some local cache.  This gives your users instant delivery of some data while you fetch other data in the background.

  Read the article

• High Availability for IaaS, PaaS and SaaS in the Cloud

  - by BuckWoody

  Outages, natural disasters and unforeseen events have proved that even in a distributed architecture, you need to plan for High Availability (HA). In this entry I'll explain a few considerations for HA within Infrastructure-as-a-Service (IaaS), Platform-as-a-Service (PaaS) and Software-as-a-Service (SaaS). In a separate post I'll talk more about Disaster Recovery (DR), since each paradigm has a different way to handle that. Planning for HA in IaaS IaaS involves Virtual Machines - so in effect, an HA strategy here takes on many of the same characteristics as it would on-premises. The primary difference is that the vendor controls the hardware, so you need to verify what they do for things like local redundancy and so on from the hardware perspective. As far as what you can control and plan for, the primary factors fall into three areas: multiple instances, geographical dispersion and task-switching. In almost every cloud vendor I've studied, to ensure your application will be protected by any level of HA, you need to have at least two of the Instances (VM's) running. This makes sense, but you might assume that the vendor just takes care of that for you - they don't. If a single VM goes down (for whatever reason) then the access to it is lost. Depending on multiple factors, you might be able to recover the data, but you should assume that you can't. You should keep a sync to another location (perhaps the vendor's storage system in another geographic datacenter or to a local location) to ensure you can continue to serve your clients. You'll also need to host the same VM's in another geographical location. Everything from a vendor outage to a network path problem could prevent your users from reaching the system, so you need to have multiple locations to handle this. This means that you'll have to figure out how to manage state between the geo's. If the system goes down in the middle of a transaction, you need to figure out what part of the process the system was in, and then re-create or transfer that state to the second set of systems. If you didn't write the software yourself, this is non-trivial. You'll also need a manual or automatic process to detect the failure and re-route the traffic to your secondary location. You could flip a DNS entry (if your application can tolerate that) or invoke another process to alias the first system to the second, such as load-balancing and so on. There are many options, but all of them involve coding the state into the application layer. If you've simply moved a state-ful application to VM's, you may not be able to easily implement an HA solution. Planning for HA in PaaS Implementing HA in PaaS is a bit simpler, since it's built on the concept of stateless applications deployment. Once again, you need at least two copies of each element in the solution (web roles, worker roles, etc.) to remain available in a single datacenter. Also, you need to deploy the application again in a separate geo, but the advantage here is that you could work out a "shared storage" model such that state is auto-balanced across the world. In fact, you don't have to maintain a "DR" site, the alternate location can be live and serving clients, and only take on extra load if the other site is not available. In Windows Azure, you can use the Traffic Manager service top route the requests as a type of auto balancer. Even with these benefits, I recommend a second backup of storage in another geographic location. Storage is inexpensive; and that second copy can be used for not only HA but DR. Planning for HA in SaaS In Software-as-a-Service (such as Office 365, or Hadoop in Windows Azure) You have far less control over the HA solution, although you still maintain the responsibility to ensure you have it. Since each SaaS is different, check with the vendor on the solution for HA - and make sure you understand what they do and what you are responsible for. They may have no HA for that solution, or pin it to a particular geo, or perhaps they have a massive HA built in with automatic load balancing (which is often the case).   All of these options (with the exception of SaaS) involve higher costs for the design. Do not sacrifice reliability for cost - that will always cost you more in the end. Build in the redundancy and HA at the very outset of the project - if you try to tack it on later in the process the business will push back and potentially not implement HA. References: http://www.bing.com/search?q=windows+azure+High+Availability  (each type of implementation is different, so I'm routing you to a search on the topic - look for the "Patterns and Practices" results for the area in Azure you're interested in)

  Read the article

• Application Composer Series: Where and When to use Groovy

  - by Richard Bingham

  This brief post is really intended as more of a reference than an article. The table below highlights two things, firstly where you can add you own custom logic via groovy code (end column), and secondly (middle column) when you might use each particular feature. Obviously this applies only where Application Composer exists, namely Fusion CRM and Oracle Sales Cloud, and is based on current (release 8) functionality. Feature Most Common Use Case Groovy Field Triggers React to run-time data changes. Only fired when the field is changed and upon submit. Y Object Triggers To extend the standard processing logic for an object, based on record creation, updates and deletes. There is a split between these firing events, with some related to UI/ADF actions and others originating in the database. UI Trigger Points: After Create - fires when a new object record is created. Commonly used to set default values for fields. Before Modify - Fires when the end-user tries to modify a field value. Could be used for generic warnings or extra security logic. Before Invalidate - Fires on the parent object when one of its child object records is created, updated, or deleted. For building in relationship logic. Before Remove - Fires when an attempt is made to delete an object record. Can be used to create conditions that prevent deletes. Database Trigger Points: Before Insert in Database - Fires before a new object is inserted into the database. Can be used to ensure a dependent record exists or check for duplicates. After Insert in Database - Fires after a new object is inserted into the database. Could be used to create a complementary record. Before Update in Database -Fires before an existing object is modified in the database. Could be used to check dependent record values. After Update in Database - Fires after an existing object is modified in the database. Could be used to update a complementary record. Before Delete in Database - Fires before an existing object is deleted from the database. Could be used to check dependent record values. After Delete in Database - Fires after an existing object is deleted from the database. Could be used to remove dependent records. After Commit in Database - Fires after the change pending for the current object (insert, update, delete) is made permanent in the current transaction. Could be used when committed data that has passed all validation is required. After Changes Posted to Database - Fires after all changes have been posted to the database, but before they are permanently committed. Could be used to make additional changes that will be saved as part of the current transaction. Y Field Validation Displays a user entered error message based groovy logic validating the field value. The message is shown only when the validation logic returns false, and the logic is triggered only when tabbing out of the field on the user interface. Y Object Validation Commonly used where validation is needed across multiple related fields on the object. Triggered on the submit UI action. Y Object Workflows All Object Workflows are fired upon either record creation or update, along with the option of adding a custom groovy firing condition. Y Field Updates - change another field when a specified one changes. Intended as an easy way to set different run-time values (e.g. pick values for LOV's) plus the value field permits groovy logic entry. Y E-Mail Notification - sends an email notification to specified users/roles. Templates support using run-time value tokens and rich text. N Task Creation - for adding standard tasks for use in the worklist functionality. N Outbound Message - will create and send an XML payload of the related object SDO to a specified endpoint. N Business Process Flow - intended for approval using the seeded process, however can also trigger custom BPMN flows. N Global Functions Utility functions that can be called from any groovy code in Application Composer (across applications). Y Object Functions Utility functions that are local to the parent object. Usually triggered from within 'Buttons and Actions' definitions in Application Composer, although can be called from other code for that object (e.g. from a trigger). Y Add Custom Fields When adding custom fields there are a few places you can include groovy logic. Y Default Value - to add logic within setting the default value when new records are entered. Y Conditionally Updateable - to add logic to set the field to read-only or not. Y Conditionally Required - to add logic to set the field to required or not. Y Formula Field - Used to provide a new aggregate field that is entirely based on groovy logic and other field values. Y Simplified UI Layouts - Advanced Expressions Used for creating dynamic layouts for simplified UI pages where fields and regions show/hide based on run-time context values and logic. Also includes support for the depends-on feature as a trigger. Y Related References This Blog: Application Composer Series Extending Sales Guide: Using Groovy Scripts Groovy Scripting Reference Guide

  Read the article

• SQL Server - Rebuilding Indexes

  - by Renso

  Goal: Rebuild indexes in SQL server. This can be done one at a time or with the example script below to rebuild all index for a specified table or for all tables in a given database. Why? The data in indexes gets fragmented over time. That means that as the index grows, the newly added rows to the index are physically stored in other sections of the allocated database storage space. Kind of like when you load your Christmas shopping into the trunk of your car and it is full you continue to load some on the back seat, in the same way some storage buffer is created for your index but once that runs out the data is then stored in other storage space and your data in your index is no longer stored in contiguous physical pages. To access the index the database manager has to "string together" disparate fragments to create the full-index and create one contiguous set of pages for that index. Defragmentation fixes that. What does the fragmentation affect?Depending of course on how large the table is and how fragmented the data is, can cause SQL Server to perform unnecessary data reads, slowing down SQL Server’s performance.Which index to rebuild?As a rule consider that when reorganize a table's clustered index, all other non-clustered indexes on that same table will automatically be rebuilt. A table can only have one clustered index.How to rebuild all the index for one table:The DBCC DBREINDEX command will not automatically rebuild all of the indexes on a given table in a databaseHow to rebuild all indexes for all tables in a given database:USE [myDB]    -- enter your database name hereDECLARE @tableName varchar(255)DECLARE TableCursor CURSOR FORSELECT table_name FROM information_schema.tablesWHERE table_type = 'base table'OPEN TableCursorFETCH NEXT FROM TableCursor INTO @tableNameWHILE @@FETCH_STATUS = 0BEGINDBCC DBREINDEX(@tableName,' ',90)     --a fill factor of 90%FETCH NEXT FROM TableCursor INTO @tableNameENDCLOSE TableCursorDEALLOCATE TableCursorWhat does this script do?Reindexes all indexes in all tables of the given database. Each index is filled with a fill factor of 90%. While the command DBCC DBREINDEX runs and rebuilds the indexes, that the table becomes unavailable for use by your users temporarily until the rebuild has completed, so don't do this during production  hours as it will create a shared lock on the tables, although it will allow for read-only uncommitted data reads; i.e.e SELECT.What is the fill factor?Is the percentage of space on each index page for storing data when the index is created or rebuilt. It replaces the fill factor when the index was created, becoming the new default for the index and for any other nonclustered indexes rebuilt because a clustered index is rebuilt. When fillfactor is 0, DBCC DBREINDEX uses the fill factor value last specified for the index. This value is stored in the sys.indexes catalog view. If fillfactor is specified, table_name and index_name must be specified. If fillfactor is not specified, the default fill factor, 100, is used.How do I determine the level of fragmentation?Run the DBCC SHOWCONTIG command. However this requires you to specify the ID of both the table and index being. To make it a lot easier by only requiring you to specify the table name and/or index you can run this script:DECLARE@ID int,@IndexID int,@IndexName varchar(128)--Specify the table and index namesSELECT @IndexName = ‘index_name’    --name of the indexSET @ID = OBJECT_ID(‘table_name’)  -- name of the tableSELECT @IndexID = IndIDFROM sysindexesWHERE id = @ID AND name = @IndexName--Show the level of fragmentationDBCC SHOWCONTIG (@id, @IndexID)Here is an example:DBCC SHOWCONTIG scanning 'Tickets' table...Table: 'Tickets' (1829581556); index ID: 1, database ID: 13TABLE level scan performed.- Pages Scanned................................: 915- Extents Scanned..............................: 119- Extent Switches..............................: 281- Avg. Pages per Extent........................: 7.7- Scan Density [Best Count:Actual Count].......: 40.78% [115:282]- Logical Scan Fragmentation ..................: 16.28%- Extent Scan Fragmentation ...................: 99.16%- Avg. Bytes Free per Page.....................: 2457.0- Avg. Page Density (full).....................: 69.64%DBCC execution completed. If DBCC printed error messages, contact your system administrator.What's important here?The Scan Density; Ideally it should be 100%. As time goes by it drops as fragmentation occurs. When the level drops below 75%, you should consider re-indexing.Here are the results of the same table and clustered index after running the script:DBCC SHOWCONTIG scanning 'Tickets' table...Table: 'Tickets' (1829581556); index ID: 1, database ID: 13TABLE level scan performed.- Pages Scanned................................: 692- Extents Scanned..............................: 87- Extent Switches..............................: 86- Avg. Pages per Extent........................: 8.0- Scan Density [Best Count:Actual Count].......: 100.00% [87:87]- Logical Scan Fragmentation ..................: 0.00%- Extent Scan Fragmentation ...................: 22.99%- Avg. Bytes Free per Page.....................: 639.8- Avg. Page Density (full).....................: 92.10%DBCC execution completed. If DBCC printed error messages, contact your system administrator.What's different?The Scan Density has increased from 40.78% to 100%; no fragmentation on the clustered index. Note that since we rebuilt the clustered index, all other index were also rebuilt.

  Read the article

• Understanding the 'High Performance' meaning in Extreme Transaction Processing

  - by kyap

  Despite my previous blogs entries on SOA/BPM and Identity Management, the domain where I'm the most passionated is definitely the Extreme Transaction Processing, commonly called XTP.I came across XTP back to 2007 while I was still FMW Product Manager in EMEA. At that time Oracle acquired a company called Tangosol, which owned an unique product called Coherence that we renamed to Oracle Coherence. Beside this innovative renaming of the product, to be honest, I didn't know much about it, except being a "distributed in-memory cache for Extreme Transaction Processing"... not very helpful still.In general when people doesn't fully understand a technology or a concept, they tend to find some shortcuts, either correct or not, to justify their lack-of understanding... and of course I was part of this category of individuals. And the shortcut was "Oracle Coherence Cache helps to improve Performance". Excellent marketing slogan... but not very meaningful still. By chance I was able to get away quickly from that group in July 2007* at Thames Valley Park (UK), after I attended one of the most interesting workshops, in my 10 years career in Oracle, delivered by Brian Oliver. The biggest mistake I made was to assume that performance improvement with Coherence was related to the response time. Which can be considered as legitimus at that time, because after-all caches help to reduce latency on cached data access, hence reduce the response-time. But like all caches, you need to define caching and expiration policies, thinking about the cache-missed strategy, and most of the time you have to re-write partially your application in order to work with the cache. At a result, the expected benefit vanishes... so, not very useful then?The key mistake I made was my perception or obsession on how performance improvement should be driven, but I strongly believe this is still a common problem to most of the developers. In fact we all know the that the performance of a system is generally presented by the Capacity (or Throughput), with the 2 important dimensions Speed (response-time) and Volume (load) :Capacity (TPS) = Volume (T) / Speed (S)To increase the Capacity, we can either reduce the Speed(in terms of response-time), or to increase the Volume. However we tend to only focus on reducing the Speed dimension, perhaps it is more concrete and tangible to measure, and nicer to present to our management because there's a direct impact onto the end-users experience. On the other hand, we assume the Volume can be addressed by the underlying hardware or software stack, so if we need more capacity (scale out), we just add more hardware or software. Unfortunately, the reality proves that IT is never as ideal as we assume...The challenge with Speed improvement approach is that it is generally difficult and costly to make things already fast... faster. And by adding Coherence will not necessarily help either. Even though we manage to do so, the Capacity can not increase forever because... the Speed can be influenced by the Volume. For all system, we always have a performance illustration as follow: In all traditional system, the increase of Volume (Transaction) will also increase the Speed (Response-Time) as some point. The reason is simple: most of the time the Application logics were not designed to scale. As an example, if you have a while-loop in your application, it is natural to conceive that parsing 200 entries will require double execution-time compared to 100 entries. If you need to "Speed-up" the execution, you can only upgrade your hardware (scale-up) with faster CPU and/or network to reduce network latency. It is technically limited and economically inefficient. And this is exactly where XTP and Coherence kick in. The primary objective of XTP is about designing applications which can scale-out for increasing the Volume, by applying coding techniques to keep the execution-time as constant as possible, independently of the number of runtime data being manipulated. It is actually not just about having an application running as fast as possible, but about having a much more predictable system, with constant response-time and linearly scale, so we can easily increase throughput by adding more hardwares in parallel. It is in general combined with the Low Latency Programming model, where we tried to optimize the network usage as much as possible, either from the programmatic angle (less network-hoops to complete a task), and/or from a hardware angle (faster network equipments). In this picture, Oracle Coherence can be considered as software-level XTP enabler, via the Distributed-Cache because it can guarantee: - Constant Data Objects access time, independently from the number of Objects and the Coherence Cluster size - Data Objects Distribution by Affinity for in-memory data grouping - In-place Data Processing for parallel executionTo summarize, Oracle Coherence is indeed useful to improve your application performance, just not in the way we commonly think. It's not about the Speed itself, but about the overall Capacity with Extreme Load while keeping consistant Speed. In the future I will keep adding new blog entries around this topic, with some sample codes experiences sharing that I capture in the last few years. In the meanwhile if you want to know more how Oracle Coherence, I strongly suggest you to start with checking how our worldwide customers are using Oracle Coherence first, then you can start playing with the product through our tutorial.Have Fun !

  Read the article

• Windows Phone 8 Announcement

  - by Tim Murphy

  As if the Surface announcement on Monday wasn’t exciting enough, today Microsoft announce that Windows Phone 8 will be coming this fall.  That itself is great news, but the features coming were like confetti flying in all different directions.  Given this speed I couldn’t capture every feature they covered.  A summary of what I did capture is listed below starting with their eight main features. Common Core The first thing that they covered is that Windows Phone 8 will share a core OS with Windows 8.  It will also run natively on multiple cores.  They mentioned that they have run it on up to 64 cores to this point.  The phones as you might expect will at least start as dual core.  If you remember there were metrics saying that Windows Phone 7 performed operations faster on a single core than other platforms did with dual cores.  The metrics they showed here indicate that Windows Phone 8 runs faster on comparable dual core hardware than other platforms. New Screen Resolutions Screen resolution has never been an issue for me, but it has been a criticism of Windows Phone 7 in the media.  Windows Phone 8 will supports three screen resolutions: WVGA 800 x 480, WXGA 1280 x 768, and 720 1280x720.  Hopefully this makes pixel counters a little happier. MicroSD Support This was one of my pet peeves when I got my Samsung Focus. With Windows Phone 8 the operating system will support adding MicroSD cards after initial setup.  Of course this is dependent on the hardware company on implementing it, but I think we have seen that even feature phone manufacturers have not had a problem supporting this in the past. NFC NFC has been an anticipated feature for some time.  What Microsoft showed today included the fact that they didn’t just want it to be for the phone.  There is cross platform NFC functionality between Windows Phone 8 and Windows 8.  The demos , while possibly a bit fanciful, showed would could be achieved even in a retail environment.  We are getting closer and closer to a Minority Report world with these technologies. Wallet Windows Phone 8 isn’t the first platform to have a wallet concept.  What they have done to differentiate themselves is to make it sot that it is not dependent on a SIM type chip like other platforms.  They have also expanded the concept beyond just banks to other types of credits such as airline miles. Nokia Mapping People have been envious of the Lumia phones having the Nokia mapping software.  Now all Windows Phone 8 devices will use NavTeq data and will have the capability to run in an offline fashion.  This is a major step forward from the Bing “touch for the next turn” maps. IT Administration The lack of features for enterprise administration and deployment was a complaint even before the Windows Phone 7 was released.  With the Windows Phone 8 release such features as Bitlocker and Secure boot will be baked into the OS. We will also have the ability to privately sign and distribute applications. Changing Start Screen Joe Belfiore made a big deal about this aspect of the new release.  Users will have more color themes available to them and the live tiles will be highly customizable. You will have the ability to resize and organize the tiles in a more dynamic way.  This allows for less important tiles or ones with less information to be made smaller.  And There Is More So what other tidbits came out of the presentation?  Later this summer the API for WP8 will be available.  There will be developer events coming to a city near you.  Another announcement of interest to developers is the ability to write applications at a native code level.  This is a boon for game developers and those who need highly efficient applications. As a topper on the cake there was mention of in app payment. On the consumer side we also found out that all updates will be available over the air.  Along with this came the fact that Microsoft will support all devices with updates for at least 18 month and you will be able to subscribe for early updates.  Update coming for Windows Phone 7.5 customers to WP7.8.  The main enhancement will be the new live tile features.  The big bonus is that the update will bypass the carriers.  I would assume though that you will be brought up to date with all previous patches that your carrier may not have released. There is so much more, but that is enough for one post.  Needless to say, EXCITING! del.icio.us Tags: Windows Phone 8,WP8,Windows Phone 7,WP7,Announcements,Microsoft

  Read the article

• Hybrid IT or Cloud Initiative – a Perfect Enterprise Architecture Maturation Opportunity

  - by Ted McLaughlan

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} All too often in the growth and maturation of Enterprise Architecture initiatives, the effort stalls or is delayed due to lack of “applied traction”. By this, I mean the EA activities - whether targeted towards compliance, risk mitigation or value opportunity propositions – may not be attached to measurable, active, visible projects that could advance and prove the value of EA. EA doesn’t work by itself, in a vacuum, without collaborative engagement and a means of proving usefulness. A critical vehicle to this proof is successful orchestration and use of assets and investment resources to meet a high-profile business objective – i.e. a successful project. More and more organizations are now exploring and considering some degree of IT outsourcing, buying and using external services and solutions to deliver their IT and business requirements – vs. building and operating in-house, in their own data centers. The rapid growth and success of “Cloud” services makes some decisions easier and some IT projects more successful, while dramatically lowering IT risks and enabling rapid growth. This is particularly true for “Software as a Service” (SaaS) applications, which essentially are complete web applications hosted and delivered over the Internet. Whether SaaS solutions – or any kind of cloud solution - are actually, ultimately the most cost-effective approach truly depends on the organization’s business and IT investment strategy. This leads us to Enterprise Architecture, the connectivity between business strategy and investment objectives, and the capabilities purchased or created to meet them. If an EA framework already exists, the approach to selecting a cloud-based solution and integrating it with internal IT systems (i.e. a “Hybrid IT” solution) is well-served by leveraging EA methods. If an EA framework doesn’t exist, or is simply not mature enough to address complex, integrated IT objectives – a hybrid IT/cloud initiative is the perfect project to advance and prove the value of EA. Why is this? For starters, the success of any complex IT integration project - spanning multiple systems, contracts and organizations, public and private – depends on active collaboration and coordination among the project stakeholders. For a hybrid IT initiative, inclusive of one or more cloud services providers, the IT services, business workflow and data governance challenges alone can be extremely complex, requiring many diverse layers of organizational expertise and authority. Establishing subject matter expertise, authorities and strategic guidance across all the disciplines involved in a hybrid-IT or hybrid-cloud system requires top-level, comprehensive experience and collaborative leadership. Tools and practices reflecting industry expertise and EA alignment can also be very helpful – such as Oracle’s “Cloud Candidate Selection Tool”. Using tools like this, and facilitating this critical collaboration by leading, organizing and coordinating the input and expertise into a shared, referenceable, reusable set of authority models and practices – this is where EA shines, and where Enterprise Architects can be most valuable. The “enterprise”, in this case, becomes something greater than the core organization – it includes internal systems, public cloud services, 3rd-party IT platforms and datacenters, distributed users and devices; a whole greater than the sum of its parts. Through facilitated project collaboration, leading to identification or creation of solid governance models and processes, a durable and useful Enterprise Architecture framework will usually emerge by itself, if not actually identified and managed as such. The transition from planning collaboration to actual coordination, where the program plan, schedule and resources become synchronized and aligned to other investments in the organization portfolio, is where EA methods and artifacts appear and become most useful. The actual scope and use of these artifacts, in the context of this project, can then set the stage for the most desirable, helpful and pragmatic form of the now-maturing EA framework and community of practice. Considering or starting a hybrid-IT or hybrid-cloud initiative? Running into some complex relationship challenges? This is the perfect time to take advantage of your new, growing or possibly latent Enterprise Architecture practice.

  Read the article

• Identity Globe Trotters (Sep Edition): The Social Customer

  - by Tanu Sood

  Welcome to the inaugural edition of our monthly series - Identity Globe Trotters. Starting today, the last Friday of every month, we will explore regional commentary on Identity Management. We will invite guest contributors from around the world to share their opinions and experiences around Identity Management and highlight regional nuances, specific drivers, solutions and more. Today's feature is contributed by Michael Krebs, Head of Business Development at esentri consulting GmbH, a (SOA) specialized Oracle Gold Partner based in Ettlingen, Germany. In his current role, Krebs is dealing with the latest developments in Enterprise Social Networking and the Integration of Social Media within business processes.  By Michael Krebs The relevance of "easy sign-on" in the age of the "Social Customer" With the growth of Social Networks, the time people spend within those closed "eco-systems" is growing year by year. With social networks looking to integrate search engines, like Facebook announced some weeks ago, their relevance will continue to grow in contrast to the more conventional search engines. This is one of the reasons why social network accounts of the users are getting more and more like a virtual fingerprint. With the growing relevance of social networks the importance of a simple way for customers to get in touch with say, customer care or contract departments, will be crucial for sales processes in critical markets. Customers want to have one single point of contact and also an easy "login-method" with no dedicated usernames, passwords or proprietary accounts. The golden rule in the future social media driven markets will be: The lower the complexity of the initial contact, the better a company can profit from social networks. If you, for example, can generate a smart way of how an existing customer can use self-service portals, the cost in providing phone support can be lowered significantly. Recruiting and Hiring of "Digital Natives" Another particular example is "social" recruiting processes. The so called "digital natives" don´t want to type in their profile facts and CV´s in proprietary systems. Why not use the actual LinkedIn profile? In German speaking region, the market in the area of professional social networks is dominated by XING, the equivalent to LinkedIn. A few weeks back, this network also opened up their interfaces for integrating social sign-ons or the usage of profile data for recruiting-purposes. In the European (and especially the German) employment market, where the number of young candidates is shrinking because of the low birth rate in the region, it will become essential to use social-media supported hiring processes to find and on-board the rare talents. In fact, you will see traditional recruiting websites integrated with social hiring to attract the best talents in the market, where the pool of potential candidates has decreased dramatically over the years. Identity Management as a key factor in the Customer Experience process To create the biggest value for customers and also future employees, companies need to connect their HCM or CRM-systems with powerful Identity management solutions. With the highly efficient Oracle (social & mobile enabling) Identity Management solution, enterprises can combine easy sign on with secure connections to the backend infrastructure. This combination enables a "one-stop" service with personalized content for customers and talents. In addition, companies can collect valuable data for the enrichment of their CRM-data. The goal is to enrich the so called "Customer Experience" via all available customer channels and contact points. Those systems have already gained importance in the B2C-markets and will gradually spread out to B2B-channels in the near future. Conclusion: Central and "Social" Identity management is key to Customer Experience Management and Talent Management For a seamless delivery of "Customer Experience Management" and a modern way of recruiting the best talent, companies need to integrate Social Sign-on capabilities with modern CX - and Talent management infrastructure. This lowers the barrier for existing and future customers or employees to get in touch with sales, support or human resources. Identity management is the technology enabler and backbone for a modern Customer Experience Infrastructure. Oracle Identity management solutions provide the opportunity to secure Social Applications and connect them with modern CX-solutions. At the end, companies benefit from "best of breed" processes and solutions for enriching customer experience without compromising security. About esentri: esentri is a provider of enterprise social networking and brings the benefits of social network communication into business environments. As one key strength, esentri uses Oracle Identity Management solutions for delivering Social and Mobile access for Oracle’s CRM- and HCM-solutions. …..End Guest Post…. With new and enhanced features optimized to secure the new digital experience, the recently announced Oracle Identity Management 11g Release 2 enables organizations to securely embrace cloud, mobile and social infrastructures and reach new user communities to help further expand and develop their businesses. Additional Resources: Oracle Identity Management 11gR2 release Oracle Identity Management website Datasheet: Mobile and Social Access (pdf) IDM at OOW: Focus on Identity Management Facebook: OracleIDM Twitter: OracleIDM We look forward to your feedback on this post and welcome your suggestions for topics to cover in Identity Globe Trotters. Last Friday, every month!

  Read the article

• Context is Everything

  - by Angus Graham

  Normal 0 false false false EN-CA X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Context is Everything How many times have you have you asked a question only to hear an answer like “Well, it depends. What exactly are you trying to do?”.  There are times that raw information can’t tell us what we need to know without putting it in a larger context. Let's take a real world example.  If I'm a maintenance planner trying to figure out which assets should be replaced during my next maintenance window, I'm going to go to my Asset Management System.  I can get it to spit out a list of assets that have failed several times over the last year.  But what are these assets connected to?  Is there any safety consequences to shutting off this pipeline to do the work?  Is some other work that's planned going to conflict with replacing this asset?  Several of these questions can't be answered by simply spitting out a list of asset IDs.  The maintenance planner will have to reference a diagram of the plant to answer several of these questions. This is precisely the idea behind Augmented Business Visualization. An Augmented Business Visualization (ABV) solution is one where your structured data (enterprise application data) and your unstructured data (documents, contracts, floor plans, designs, etc.) come together to allow you to make better decisions.  Essentially we're showing your business data into its context. AutoVue allows you to create ABV solutions by integrating your enterprise application with AutoVue’s hotspot framework. Hotspots can be defined for your document. Users can click these hotspots to trigger actions in your enterprise app. Similarly, the enterprise app can highlight the hotspots in your document based on its business data, creating a visual dashboard of your business data in the context of your document. ABV is not new. We introduced the hotspot framework in AutoVue 20.1 with text hotspots. Any text in a PDF or 2D CAD drawing could be turned into a hotspot. In 20.2 we have enhanced this to include 2 new types of hotspots: 3D and regional hotspots. 3D hotspots allow you to turn 3D parts into hotspots. Hotspots can be defined based on the attributes of the part, so you can create hotspots based on part numbers, material, date of delivery, etc.  Regional hotspots allow an administrator to define rectangular regions on any PDF, image, or 2D CAD drawing. This is perfect for cases where the document you’re using either doesn’t have text in it (a JPG or TIFF for example) or if you want to define hotspots that don’t correspond to the text in the document. There are lots of possible uses for AutoVue hotspots.  A great demonstration of how our hotspot capabilities can help add context to enterprise data in the Energy sector can be found in the following AutoVue movies: Maintenance Planning in the Energy Sector - Watch it Now Capital Construction Project Management in the Energy Sector  -  Watch it Now Commissioning and Handover Process for the Energy Sector  -  Watch it Now

  Read the article

• Oracle Cloud Applications: The Right Ingredients Baked In

  - by yaldahhakim

  v\:* {behavior:url(#default#VML);} o\:* {behavior:url(#default#VML);} w\:* {behavior:url(#default#VML);} .shape {behavior:url(#default#VML);} Normal 0 false false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Oracle Cloud Applications: The Right Ingredients Baked In Eggs, flour, milk, and sugar. The magic happens when you mix these ingredients together. The same goes for the hottest technologies fast changing how IT impacts our organizations today: cloud, social, mobile, and big data. By themselves they’re pretty good; combining them with a great recipe is what unlocks real transformation power. Choosing the right cloud can be very similar to choosing the right cake. First consider comparing the core ingredients that go into baking a cake and the core design principles in building a cloud-based application. For instance, if flour is the base ingredient of a cake, then rich functionality that spans complete business processes is the base of an enterprise-grade cloud. Cloud computing is more than just consuming an "application as service", and having someone else manage it for you. Rather, the value of cloud is about making your business more agile in the marketplace, and shortening the time it takes to deliver and adopt new innovation. It’s also about improving not only the efficiency at which we communicate but the actual quality of the information shared as well. Data from different systems, like ingredients in a cake, must also be blended together effectively and evaluated through a consolidated lens. When this doesn’t happen, for instance when data in your sales cloud doesn't seamlessly connect with your order management and other “back office” applications, the speed and quality of information can decrease drastically. It’s like mixing ingredients in a strainer with a straw – you just can’t bring it all together without losing something. Mixing ingredients is similar to bringing clouds together, and co-existing cloud applications with traditional on premise applications. This is where a shared services  platform built on open standards and Service Oriented Architecture (SOA) is critical. It’s essentially a cloud recipe that calls for not only great ingredients, but also ingredients you can get locally or most likely already have in your kitchen (or IT shop.) Open standards is the best way to deliver a cost effective, durable application integration strategy – regardless of where your apps are deployed. It’s also the best way to build your own cloud applications, or extend the ones you consume from a third party. Just like using standard ingredients and tools you already have in your kitchen, a standards based cloud enables your IT resources to ensure a cloud works easily with other systems. Your IT staff can also make changes using tools they are already familiar with. Or even more ideal, enable business users to actually tailor their experience without having to call upon IT for help at all. This frees IT resources to focus more on developing new innovative services for the organization vs. run and maintain. Carrying the cake analogy forward, you need to add all the ingredients in before you bake it. The same is true with a modern cloud. To harness the full power of cloud, you can’t leave out some of the most important ingredients and just layer them on top later. This is what a lot of our niche competitors have done when it comes to social, mobile, big data and analytics, and other key technologies impacting the way we do business. The transformational power of these technology trends comes from having a strategy from the get-go that combines them into a winning recipe, and delivers them in a unified way. In looking at ways Oracle’s cloud is different from other clouds – not only is breadth of functionality rich across functional pillars like CRM, HCM, ERP, etc. but it embeds social, mobile, and rich intelligence capabilities where they make the most sense across business processes. This strategy enables the Oracle Cloud to uniquely deliver on all three of these dimensions to help our customers unlock the full power of these transformational technologies.

  Read the article

• Exadata?????????INSERT?UPDATE

  - by Liu Maclean(???)

  Hybrid Columnar Compression??????Exadata?????????????,??????????(advanced compression)??,Hybrid columnar compression (HCC) ???Exadata????????HCC???????????CU(compression unit?????),??CU??????????,?????????????????????????,???CU????block??????????????? ???????INSERT/UPDATE??,??????????????,????UPDATE/INSERT???HCC?????????????????? hybrid columnar compression???????????????(bulk initial load)??,??????(direct load)??ALTER TABLE MOVE, IMPDP???????(append INSERT),??HCC??????????????????????? ???????????????????,?????????CU????????? ??????????????HCC?????????????for OLTP?????? ????????: SQL*Plus: Release 11.2.0.2.0 Production on Wed Sep 12 06:14:53 2012 Copyright (c) 1982, 2010, Oracle. All rights reserved. Connected to: Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - Production With the Partitioning, Automatic Storage Management, OLAP, Data Mining and Real Application Testing options SQL> grant dba to scott; Grant succeeded. SQL> conn scott/oracle Connected. SQL> SQL> create table hcc_maclean tablespace users compress for query high as select * from dba_objects; Table created. 1* select rowid,owner,object_name,dbms_rowid.rowid_block_number(rowid) from hcc_maclean where owner='MACLEAN' SQL> / ROWID OWNER OBJECT_NAME DBMS_ROWID.ROWID_BLOCK_NUMBER(ROWID) ------------------------------ ------------------------------ -------------------- ------------------------------------ AAAThuAAEAAAHTJAOI MACLEAN SALES 29897 AAAThuAAEAAAHTJAOJ MACLEAN MYCUSTOMERS 29897 AAAThuAAEAAAHTJAOK MACLEAN MYCUST_ARCHIVE 29897 AAAThuAAEAAAHTJAOL MACLEAN MYCUST_QUERY 29897 AAAThuAAEAAAHTJAOh MACLEAN COMPRESS_QUERY 29897 AAAThuAAEAAAHTJAOi MACLEAN UNCOMPRESS 29897 AAAThuAAEAAAHTJAOj MACLEAN CHAINED_ROWS 29897 AAAThuAAEAAAHTJAOk MACLEAN COMPRESS_QUERY1 29897 8 rows selected. select dbms_rowid.rowid_block_number(rowid),dbms_rowid.rowid_relative_fno(rowid) from hcc_maclean where owner='MACLEAN'; session A: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOI'; session B: update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where rowid='AAAThuAAEAAAHTJAOJ'; SQL> select sid,wait_event_text,BLOCKER_SID from v$wait_chains; SID WAIT_EVENT_TEXT BLOCKER_SID ---------- ---------------------------------------------------------------- ----------- 13 enq: TX - row lock contention 136 136 SQL*Net message from client ????session A block B,????HCC???update row??CU?????CU?????? SQL> alter system checkpoint; System altered. SQL> / System altered. SQL> alter system dump datafile 4 block 29897 2 ; Block header dump: 0x010074c9 Object id on Block? Y seg/obj: 0x1386e csc: 0x00.1cad7e itc: 3 flg: E typ: 1 - DATA brn: 0 bdba: 0x10074c8 ver: 0x01 opc: 0 inc: 0 exflg: 0 Itl Xid Uba Flag Lck Scn/Fsc 0x01 0xffff.000.00000000 0x00000000.0000.00 C--- 0 scn 0x0000.001cabfa 0x02 0x000a.00a.00000430 0x00c051a7.0169.17 ---- 1 fsc 0x0000.00000000 0x03 0x0000.000.00000000 0x00000000.0000.00 ---- 0 fsc 0x0000.00000000 avsp=0x14 tosp=0x14 r0_9ir2=0x0 mec_kdbh9ir2=0x0 76543210 shcf_kdbh9ir2=---------- 76543210 flag_9ir2=--R----- Archive compression: Y fcls_9ir2[0]={ } 0x16:pti[0] nrow=1 offs=0 0x1a:pri[0] offs=0x30 block_row_dump: tab 0, row 0, @0x30 tl: 8016 fb: --H-F--N lb: 0x2 cc: 1 ==>??CU??ITL 0x02 nrid: 0x010074ca.0 col 0: [8004] Compression level: 02 (Query High) Length of CU row: 8004 kdzhrh: ------PC CBLK: 1 Start Slot: 00 NUMP: 01 PNUM: 00 POFF: 7984 PRID: 0x010074ca.0 CU header: CU version: 0 CU magic number: 0x4b445a30 CU checksum: 0xf8faf86e CU total length: 8694 CU flags: NC-U-CRD-OP ncols: 15 nrows: 995 algo: 0 CU decomp length: 8487 len/value length: 100111 row pieces per row: 1 num deleted rows: 1 deleted rows: 904, START_CU: ????????????row?????: SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAAThuAAEAAAHTJAOk') from dual; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN','AAATHUAAEAAAHTJAOK' -------------------------------------------------------------------------------- 4 COMP_NOCOMPRESS CONSTANT NUMBER := 1;COMP_FOR_OLTP CONSTANT NUMBER := 2;COMP_FOR_QUERY_HIGH CONSTANT NUMBER := 4;COMP_FOR_QUERY_LOW CONSTANT NUMBER := 8;COMP_FOR_ARCHIVE_HIGH CONSTANT NUMBER := 16;COMP_FOR_ARCHIVE_LOW CONSTANT NUMBER := 32; COMP_RATIO_MINROWS CONSTANT NUMBER := 1000000;COMP_RATIO_ALLROWS CONSTANT NUMBER := -1; ?????????????,??COMP_FOR_QUERY_HIGH?4,COMP_FOR_QUERY_LOW ?8 ?????????GET_COMPRESSION_TYPE??rowid????????4?????COMP_FOR_QUERY_HIGH????: SQL> update hcc_maclean set OBJECT_NAME=OBJECT_NAME||'DBM' where owner='MACLEAN'; 8 rows updated. SQL> commit; Commit complete. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 1 1 1 1 1 1 1 1 8 rows selected. ??????????????COMPRESSION_TYPE?COMP_FOR_QUERY_HIGH???COMP_NOCOMPRESS,????????compress for query high????????????????? ?11g????????????????????HCC??????????? ALTER TABLE MOVE???????????????????HCC??? SQL> ALTER TABLE hcc_MACLEAN move COMPRESS FOR ARCHIVE HIGH; Table altered. SQL> select DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',rowid) from HCC_MACLEAN where owner='MACLEAN'; DBMS_COMPRESSION.GET_COMPRESSION_TYPE('SCOTT','HCC_MACLEAN',ROWID) ------------------------------------------------------------------ 16 16 16 16 16 16 16 16 8 rows selected.

  Read the article

• Some Early Considerations

  - by Chris Massey

  Following on from my previous post, I want to say "thank you" to everyone who has got in touch and got involved – you are pioneers! An update on where we are right now: paper prototypes v1 To be more specific, we’ve picked two of the ideas that seem to have more pros than cons, turned them into Balsamiq mockups, and are getting them fleshed out with realistic content. We’ll initially make these available to the aforementioned pioneers (thank you again), roll in the feedback, and then open up to get more data on what works and what doesn’t. If you’ve got any questions about this (or what we’re working on right now), feel free to ask me in the comments below. I’ve had a few people express an interest in the process we’re going through, and I’m more than happy to share details more frequently as we go along – not least because you, dear reader, will help us stay on target and create something Good. To start with, here’s a quick flashback to bring you all up to speed. A Brief Retrospective As you may already know, we’re creating a new publishing asset specifically focused on providing great content for web developers. We don’t yet know exactly what this thing will look like, or exactly how it will work, but we know we want to create something that is useful different. For my part, I’m seriously excited at the prospect of building a genuinely digital publishing system (as opposed to what most publishing is these days, which is print-style publishing which just happens to be on the web). The main challenge at this point is working out our build-measure-assess loop to speed up our experimental turn-around, and that’ll get better as we run more trials. Of course, there are a few things we’ve been pondering at this early conceptual stage: Do we publishing about heterogeneous technology stacks from day 1, or do we start with ASP.NET (which we’re familiar with) & branch out later? There are challenges with either approach. What publishing "modes" are already being well-handled? For example, the likes of Pluralsight, TekPub, and Treehouse have pretty much nailed video training (debate about price, if you like), and unless we think we can do it faster / better / cheaper (unlikely, for the record), we should leave them to it. Where should we base whatever we create? Should we create a completely new asset under a new name, graft something onto Simple-Talk (like the labs), or just build something directly into Simple-Talk? It sounds trivial, but it does have at least some impact on infrastructure and what how we manage the different types of content we (will) have. Are there any obvious problems or niches that we think could address really well, or should we just throw ideas out and see what readers respond to? What kind of users do we want to provide for? This actually deserves a little bit of unpacking… Why are you here? We currently divide readers into (broadly) the categories: Category 1: I know nothing about X, and I’d like to learn about it. Category 2: I know something about X, but I’d like to learn how to do something specific with it. Category 3: Ah man, I have a problem with X, and I need to fix it now. Now that I think about it, I might also include a 4th class of reader: Category 4: I’m looking for something interesting to engage my brain. These are clearly task-based categorizations, and depending on which task you’re performing when you arrive here, you’re going to need different types of content, or will have specific discovery needs. One of the questions that’s at the back of my mind whenever I consider a new idea is “How many of the categories will this satisfy?” As an example, typical video training is very well suited to categories 1, 2, and 4. StackOverflow is very well suited to category 3, and serves as a sign-posting system to the rest. Clearly it’s not necessary to satisfy every category need to be useful and popular, but being aware of what behavior readers might be exhibiting when they arrive will help us tune our ideas appropriately. < / Flashback > We don’t have clean answers to most of these considerations – they’re things we’re aware of, and each idea we look at is going to be best suited to a different mix of the options I’ve described. Our first experimental loop will be coming full circle in the next few days, so we should start to see how the different possibilities vary between ideas. Free to chime in with questions and suggestions about anything I’ve just brain-dumped, or at any stage as we go along. If you see anything that intrigued or enrages you, or just have an idea you’d like to share, I’d love to hear from you.

  Read the article

< Previous Page | 859 860 861 862 863 864 865 866 867 868 869 870  | Next Page >