Search Results

Search found 5747 results on 230 pages for 'backup'.

Page 87/230 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • BackupPC - why does it use rsync --sender --server ... ?

    - by Jakobud
    I'm in the process of experimenting with BackupPC on a CentOS 5.5 server. I have everything pretty much setup with default values. I tried setting up a basic backup for a host's /www directory. The backup fails with the following errors: full backup started for directory /www Running: /usr/bin/ssh -q -x -l root target /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Xfer PIDs are now 30395 Read EOF: Connection reset by peer Tried again: got 0 bytes Done: 0 files, 0 bytes Got fatal error during xfer (Unable to read 4 bytes) Backup aborted (Unable to read 4 bytes) Not saving this as a partial backup since it has fewer files than the prior one (got 0 and 0 files versus 0) First of all, yes I have my ssh keys setup to allow me to ssh to the target server without requiring a password. In the process of troubleshooting, I tried the above ssh command directly from the command line, and it hangs. Looking at the end of the debug messages for SSH I get: debug1: Sending subsystem: /usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/ Request for subsystem '/usr/bin/rsync --server --sender --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive --ignore-times . /www/' failed on channel 0 Next I started looking at the rsync flags. I did not recognize --server and --sender. Looking at the rsync man pages, sure enough, I don't see anything about --server or --sender in there. What are those in there for? Looking at the BackupPC config I have this: RsyncClientPath = /usr/bin/rsync RsyncClientCmd = $sshPath -q -x -l root $host $rsyncPath $argList+ And for the arguments, I have the following listed: --numeric-ids --perms --owner --group -D --links --hard-links --times --block-size=2048 --recursive Notice there is no --server, --sender or --ignore-times. Why are these things getting added in? Is this part of the problem?

    Read the article

  • Bacula not backing up all the files it should be doing

    - by Nigel Ellis
    I have Bacula (5.2) running on a Fedora 14 system backing up several different computers including Windows 7, Windows 2003 and Windows 2008. When backing up the Windows 2008 server the backup stops after a relatively small amount has been backed up and says the backup was okay. The fileset I am trying to backup should be around 323Gb, but it manages a mere 27Gb before stopping - but not erring. I did try creating a mount on the Fedora computer to the server I am trying to backup, and Bacula managed to copy 58Gb. When I tried to use the mount to copy the files manually I was able to copy them all - there are no problems with permissions etc. on the mount. Please can anyone give a reason why Bacula would just stop? I have heard there is a 260 character limit, but some of the files that should have been copy resolve to a shorter filename than some that have been backed up.

    Read the article

  • rsync - Exclude files that are over a certain size?

    - by Rory
    I am doing a backup of my desktop to a remote machine. I'm basically doing rsync -a ~ example.com:backup/ However there are loads of large files, e.g. wikipedia dumps etc. Most of the files I care a lot about a small, such as firefox cookie files, or .bashrc. Is there some invocation to rsync that will exclude files that are over a certain size? That way I could copy all files that are less than 10MB first, then do all files. That way I can do a fast backup of the most important files, then a longer backup of everything else.

    Read the article

  • OS X wants to back up Macintosh HD to itself

    - by slhck
    From time to time, OS X (10.6) will ask me if I want to perform a backup of my Macintosh HD, but the backup destination is obviously the HD itself. I have not plugged in any external device, nor is there a Time Capsule network share. A message like this will appear: Moreover, the Macintosh HD will suddenly have a Time Machine icon in Finder. Has somebody experienced the same and could help me identify how to stop OS X from using its own disk as the backup destination?

    Read the article

  • Command does not execute in crontab while command itself works just fine

    - by fuzzybee
    I have this script from Colin Johnson on Github - https://github.com/colinbjohnson/aws-missing-tools/tree/master/ec2-automate-backup It seems great. I have modified it to send email to myself every time an EBS snapshot is created or deleted. The following works like a charm ec2-automate-backup.sh -v "vol-myvolumeid" -k 3 However, it does not execute at all as part of my crontab (I didn't receive any emails) #some command that got commented out */5 * * * * ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3; * * * * * date /root/logs/crontab.log; */5 * * * * date /root/logs/crontab2.log Please note that the 2nd and 3rd execute just fines as I can see the date and time in log files. What could I have missed here? The full ec2-automate-backup.sh is as follows: #!/bin/bash - # Author: Colin Johnson / [email protected] # Date: 2012-09-24 # Version 0.1 # License Type: GNU GENERAL PUBLIC LICENSE, Version 3 # #confirms that executables required for succesful script execution are available prerequisite_check() { for prerequisite in basename ec2-create-snapshot ec2-create-tags ec2-describe-snapshots ec2-delete-snapshot date do #use of "hash" chosen as it is a shell builtin and will add programs to hash table, possibly speeding execution. Use of type also considered - open to suggestions. hash $prerequisite &> /dev/null if [[ $? == 1 ]] #has exits with exit status of 70, executable was not found then echo "In order to use `basename $0`, the executable \"$prerequisite\" must be installed." 1>&2 | mailx -s "Error happened 0" [email protected] ; exit 70 fi done } #get_EBS_List gets a list of available EBS instances depending upon the selection_method of EBS selection that is provided by user input get_EBS_List() { case $selection_method in volumeid) if [[ -z $volumeid ]] then echo "The selection method \"volumeid\" (which is $app_name's default selection_method of operation or requested by using the -s volumeid parameter) requires a volumeid (-v volumeid) for operation. Correct usage is as follows: \"-v vol-6d6a0527\",\"-s volumeid -v vol-6d6a0527\" or \"-v \"vol-6d6a0527 vol-636a0112\"\" if multiple volumes are to be selected." 1>&2 | mailx -s "Error happened 1" [email protected] ; exit 64 fi ebs_selection_string="$volumeid" ;; tag) if [[ -z $tag ]] then echo "The selected selection_method \"tag\" (-s tag) requires a valid tag (-t key=value) for operation. Correct usage is as follows: \"-s tag -t backup=true\" or \"-s tag -t Name=my_tag.\"" 1>&2 | mailx -s "Error happened 2" [email protected] ; exit 64 fi ebs_selection_string="--filter tag:$tag" ;; *) echo "If you specify a selection_method (-s selection_method) for selecting EBS volumes you must select either \"volumeid\" (-s volumeid) or \"tag\" (-s tag)." 1>&2 | mailx -s "Error happened 3" [email protected] ; exit 64 ;; esac #creates a list of all ebs volumes that match the selection string from above ebs_backup_list_complete=`ec2-describe-volumes --show-empty-fields --region $region $ebs_selection_string 2>&1` #takes the output of the previous command ebs_backup_list_result=`echo $?` if [[ $ebs_backup_list_result -gt 0 ]] then echo -e "An error occured when running ec2-describe-volumes. The error returned is below:\n$ebs_backup_list_complete" 1>&2 | mailx -s "Error happened 4" [email protected] ; exit 70 fi ebs_backup_list=`echo "$ebs_backup_list_complete" | grep ^VOLUME | cut -f 2` #code to right will output list of EBS volumes to be backed up: echo -e "Now outputting ebs_backup_list:\n$ebs_backup_list" } create_EBS_Snapshot_Tags() { #snapshot tags holds all tags that need to be applied to a given snapshot - by aggregating tags we ensure that ec2-create-tags is called only onece snapshot_tags="" #if $name_tag_create is true then append ec2ab_${ebs_selected}_$date_current to the variable $snapshot_tags if $name_tag_create then ec2_snapshot_resource_id=`echo "$ec2_create_snapshot_result" | cut -f 2` snapshot_tags="$snapshot_tags --tag Name=ec2ab_${ebs_selected}_$date_current" fi #if $purge_after_days is true, then append $purge_after_date to the variable $snapshot_tags if [[ -n $purge_after_days ]] then snapshot_tags="$snapshot_tags --tag PurgeAfter=$purge_after_date --tag PurgeAllow=true" fi #if $snapshot_tags is not zero length then set the tag on the snapshot using ec2-create-tags if [[ -n $snapshot_tags ]] then echo "Tagging Snapshot $ec2_snapshot_resource_id with the following Tags:" ec2-create-tags $ec2_snapshot_resource_id --region $region $snapshot_tags #echo "Snapshot tags successfully created" | mailx -s "Snapshot tags successfully created" [email protected] fi } date_command_get() { #finds full path to date binary date_binary_full_path=`which date` #command below is used to determine if date binary is gnu, macosx or other date_binary_file_result=`file -b $date_binary_full_path` case $date_binary_file_result in "Mach-O 64-bit executable x86_64") date_binary="macosx" ;; "ELF 64-bit LSB executable, x86-64, version 1 (SYSV)"*) date_binary="gnu" ;; *) date_binary="unknown" ;; esac #based on the installed date binary the case statement below will determine the method to use to determine "purge_after_days" in the future case $date_binary in gnu) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; macosx) date_command="date -v+${purge_after_days}d -u +%Y-%m-%d" ;; unknown) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; *) date_command="date -d +${purge_after_days}days -u +%Y-%m-%d" ;; esac } purge_EBS_Snapshots() { #snapshot_tag_list is a string that contains all snapshots with either the key PurgeAllow or PurgeAfter set snapshot_tag_list=`ec2-describe-tags --show-empty-fields --region $region --filter resource-type=snapshot --filter key=PurgeAllow,PurgeAfter` #snapshot_purge_allowed is a list of all snapshot_ids with PurgeAllow=true snapshot_purge_allowed=`echo "$snapshot_tag_list" | grep .*PurgeAllow'\t'true | cut -f 3` for snapshot_id_evaluated in $snapshot_purge_allowed do #gets the "PurgeAfter" date which is in UTC with YYYY-MM-DD format (or %Y-%m-%d) purge_after_date=`echo "$snapshot_tag_list" | grep .*$snapshot_id_evaluated'\t'PurgeAfter.* | cut -f 5` #if purge_after_date is not set then we have a problem. Need to alter user. if [[ -z $purge_after_date ]] #Alerts user to the fact that a Snapshot was found with PurgeAllow=true but with no PurgeAfter date. then echo "A Snapshot with the Snapshot ID $snapshot_id_evaluated has the tag \"PurgeAllow=true\" but does not have a \"PurgeAfter=YYYY-MM-DD\" date. $app_name is unable to determine if $snapshot_id_evaluated should be purged." 1>&2 | mailx -s "Error happened 5" [email protected] else #convert both the date_current and purge_after_date into epoch time to allow for comparison date_current_epoch=`date -j -f "%Y-%m-%d" "$date_current" "+%s"` purge_after_date_epoch=`date -j -f "%Y-%m-%d" "$purge_after_date" "+%s"` #perform compparison - if $purge_after_date_epoch is a lower number than $date_current_epoch than the PurgeAfter date is earlier than the current date - and the snapshot can be safely removed if [[ $purge_after_date_epoch < $date_current_epoch ]] then echo "The snapshot \"$snapshot_id_evaluated\" with the Purge After date of $purge_after_date will be deleted." ec2-delete-snapshot --region $region $snapshot_id_evaluated echo "Old snapshots successfully deleted for $volumeid" | mailx -s "Old snapshots successfully deleted for $volumeid" [email protected] fi fi done } #calls prerequisitecheck function to ensure that all executables required for script execution are available prerequisite_check app_name=`basename $0` #sets defaults selection_method="volumeid" region="ap-southeast-1" #date_binary allows a user to set the "date" binary that is installed on their system and, therefore, the options that will be given to the date binary to perform date calculations date_binary="" #sets the "Name" tag set for a snapshot to false - using "Name" requires that ec2-create-tags be called in addition to ec2-create-snapshot name_tag_create=false #sets the Purge Snapshot feature to false - this feature will eventually allow the removal of snapshots that have a "PurgeAfter" tag that is earlier than current date purge_snapshots=false #handles options processing while getopts :s:r:v:t:k:pn opt do case $opt in s) selection_method="$OPTARG";; r) region="$OPTARG";; v) volumeid="$OPTARG";; t) tag="$OPTARG";; k) purge_after_days="$OPTARG";; n) name_tag_create=true;; p) purge_snapshots=true;; *) echo "Error with Options Input. Cause of failure is most likely that an unsupported parameter was passed or a parameter was passed without a corresponding option." 1>&2 ; exit 64;; esac done #sets date variable date_current=`date -u +%Y-%m-%d` #sets the PurgeAfter tag to the number of days that a snapshot should be retained if [[ -n $purge_after_days ]] then #if the date_binary is not set, call the date_command_get function if [[ -z $date_binary ]] then date_command_get fi purge_after_date=`$date_command` echo "Snapshots taken by $app_name will be eligible for purging after the following date: $purge_after_date." fi #get_EBS_List gets a list of EBS instances for which a snapshot is desired. The list of EBS instances depends upon the selection_method that is provided by user input get_EBS_List #the loop below is called once for each volume in $ebs_backup_list - the currently selected EBS volume is passed in as "ebs_selected" for ebs_selected in $ebs_backup_list do ec2_snapshot_description="ec2ab_${ebs_selected}_$date_current" ec2_create_snapshot_result=`ec2-create-snapshot --region $region -d $ec2_snapshot_description $ebs_selected 2>&1` if [[ $? != 0 ]] then echo -e "An error occured when running ec2-create-snapshot. The error returned is below:\n$ec2_create_snapshot_result" 1>&2 ; exit 70 else ec2_snapshot_resource_id=`echo "$ec2_create_snapshot_result" | cut -f 2` echo "Snapshots successfully created for volume $volumeid" | mailx -s "Snapshots successfully created for $volumeid" [email protected] fi create_EBS_Snapshot_Tags done #if purge_snapshots is true, then run purge_EBS_Snapshots function if $purge_snapshots then echo "Snapshot Purging is Starting Now." purge_EBS_Snapshots fi cron log Oct 23 10:24:01 ip-10-130-153-227 CROND[28214]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:24:01 ip-10-130-153-227 CROND[28215]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:25:01 ip-10-130-153-227 CROND[28228]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:25:01 ip-10-130-153-227 CROND[28229]: (root) CMD (date >> /root/logs/crontab2.log) Oct 23 10:26:01 ip-10-130-153-227 CROND[28239]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:27:01 ip-10-130-153-227 CROND[28247]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:27:01 ip-10-130-153-227 CROND[28248]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:28:01 ip-10-130-153-227 CROND[28263]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:29:01 ip-10-130-153-227 CROND[28275]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:30:01 ip-10-130-153-227 CROND[28292]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:30:01 ip-10-130-153-227 CROND[28293]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:30:01 ip-10-130-153-227 CROND[28294]: (root) CMD (date >> /root/logs/crontab2.log) Oct 23 10:31:01 ip-10-130-153-227 CROND[28312]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:32:01 ip-10-130-153-227 CROND[28319]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:33:01 ip-10-130-153-227 CROND[28325]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:33:01 ip-10-130-153-227 CROND[28324]: (root) CMD (root (ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3;)) Oct 23 10:34:01 ip-10-130-153-227 CROND[28345]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:35:01 ip-10-130-153-227 CROND[28362]: (root) CMD (date >> /root/logs/crontab.log;) Oct 23 10:35:01 ip-10-130-153-227 CROND[28363]: (root) CMD (date >> /root/logs/crontab2.log) Mails to root From [email protected] Tue Oct 23 06:00:01 2012 Return-Path: <[email protected]> Date: Tue, 23 Oct 2012 06:00:01 GMT From: [email protected] (Cron Daemon) To: [email protected] Subject: Cron <root@ip-10-130-153-227> root ec2-automate-backup.sh -v "vol-fb2fbcdf" -k 3 Content-Type: text/plain; charset=UTF-8 Auto-Submitted: auto-generated X-Cron-Env: <SHELL=/bin/sh> X-Cron-Env: <HOME=/root> X-Cron-Env: <PATH=/usr/bin:/bin> X-Cron-Env: <LOGNAME=root> X-Cron-Env: <USER=root> Status: R /bin/sh: root: command not found

    Read the article

  • Simple one-way synchronisation of user password list between servers

    - by Renaud Bompuis
    Using a RedHat-derivative distro (CentOS), I'd like to keep the list of regular users (UID over 500), and group (and shadow files) pushed to a backup server. The sync is only one-way, from the main server to the backup server. I don't really want to have to deal with LDAP or NIS. All I need is a simple script that can be run nightly to keep the backup server updated. The main server can SSH into the backup system. Any suggestion? Edit: Thanks for the suggestions so far but I think I didn't make myself clear enough. I'm only looking at synchronising normal users whose UID is on or above 500. System/service users (with UID below 500) may be different on both system. So you can't just sync the whole files I'm afraid.

    Read the article

  • Best tool for monitoring backups, etc. and trending statstics from that data

    - by Randy Syring
    I have done some research on nagios, opennms, and zenoss but am not confident that I have found what I am looking for. The main driving force for me right now is being able to monitor backups. This includes mysql, mssql, and eventually some file system backups. We have a tool that wraps the backup process for these different systems and collects statistics. So, items like: number of databases backed up size of db backup file size of db backup file compressed time to make backup time to zip file I want to be able to A) have notifications if the jobs are not run according to schedule B) be able to set thresholds on the statistics which would trigger notifications C) I want to be able to trend and graph the statistics I am planning on sending this information to the monitoring application through an HTTP POST. Or, the monitoring application could pull it from a log file as well. However, we will have other processes with other "arbitrary" (from the monitoring system's perspective) statics that will want to monitor and trend, so flexibility is very important. The tool or tools should also be able to do general monitoring and trending of network interfaces, server load, etc. Once we get the backup monitoring in place, we will want to include those items as well. Thanks.

    Read the article

  • Shrinking a large transaction log on a full drive

    - by Sam
    Someone fired off an update statement as part of some maintenance which did a cross join update on two tables with 200,000 records in each. That's 40 trillion statements, which would explain part of how the log grew to 200GB. I also did not have the log file capped, which is another problem I will be taking care of server wide - where we have almost 200 databases residing. The 'solution' I used was to backup the database, backup the log with truncate_only, and then backup the database again. I then shrunk the log file and set a cap on the log. Seeing as there were other databases using the log drive, I was in a bit of a rush to clean it out. I might have been able to back the log file up to our backup drive, hoping that no other databases needed to grow their log file. Paul Randal from http://technet.microsoft.com/en-us/magazine/2009.02.logging.aspx Under no circumstances should you delete the transaction log, try to rebuild it using undocumented commands, or simply truncate it using the NO_LOG or TRUNCATE_ONLY options of BACKUP LOG (which have been removed in SQL Server 2008). These options will either cause transactional inconsistency (and more than likely corruption) or remove the possibility of being able to properly recover the database. Were there any other options I'm not aware of?

    Read the article

  • How can I check whether a volume is mounted where it is supposed to be using Python?

    - by Ben Hymers
    I've got a backup script written in Python which creates the destination directory before copying the source directory to it. I've configured it to use /external-backup as the destination, which is where I mount an external hard drive. I just ran the script without the hard drive being turned on (or being mounted) and found that it was working as normal, albeit making a backup on the internal hard drive, which has nowhere near enough space to back itself up. My question is: how can I check whether the volume is mounted in the right place before writing to it? If I can detect that /external-backup isn't mounted, I can prevent writing to it. The bonus question is why was this allowed, when the OS knows that directory is supposed to live on another device, and what would happen to the data (on the internal hard drive) should I later mount that device (the external hard drive)? Clearly there can't be two copies on different devices at the same path! Thanks in advance!

    Read the article

  • Why Is Volume Shadow Copy Services stopping?

    - by David Mackintosh
    I am running Windows 7 Professional, 64-bit. I am running a backup-over-the-internet software client which depends on the Volume Shadow Copy Services running. Since I installed Service Pack 1 (or rather, didn't object when Windows Update forced Service Pack 1 on me) the backup service is failing to back everything up because VSC isn't running. Most of the time it fails to back up such noise as the Security Essentials database or the Messenger Live contact list -- stuff I really don't care about -- but I don't want to fall into the trap of accepting an Error-state backup as "normal". At the recommendation of the backup software, I have set the VSC service startup mode to be Automatic. When I look in the Event Log, System channel I can see at boot time: The Volume Shadow Copy service entered the running state. ...and then two or three minutes later: The Volume Shadow Copy service entered the stopped state. How do I figure out why VSC is stopping? At the suggestion of the backup vendor, I have already followed the suggestions from http://support.microsoft.com/default.aspx/kb/940184 net stop SENS net stop EventSystem net start EventSystem net start SENS net stop COMSysApp net stop SwPrv net stop VSS cd /d C:\Windows\system32 regsvr32 ole32.dll /s regsvr32 oleaut32.dll /s regsvr32 vss_ps.dll /s vssvc /register /s regsvr32 /i swprv.dll /s regsvr32 /i eventcls.dll /s regsvr32 es.dll /s regsvr32 stdprov.dll /s regsvr32 vssui.dll /s regsvr32 msxml.dll /s regsvr32 msxml3.dll /s regsvr32 msxml4.dll /s net start SwPrv net start VSS net start ProtectedStorage ...and per http://support.microsoft.com/kb/940184 I have deleted the key tree HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\EventSystem\{26c409cc-ae86-11d1-b616-00805fc79216}\Subscriptions I have also run chkdsk /F and chkdsk /R on both permanent hard disks. (I had a similar problem with another computer (same OS, same failure, same start point after SP1 install) but the problem went away when I forced Volume Shadow Copy Services to Automatic startup rather than Manual. I did not have to resort to following the Microsoft KB instructions.)

    Read the article

  • Bash loop to move directories on a remote host via ssh

    - by I Forgot
    I'm trying to figure out a way to perform the following loop on a remote host via ssh. Basically it renames a series of directories to create a rotating backup. But it's local. I want it to work against directories on a remote host. while [ $n -gt 0 ]; do { src=$(($n-1)) dst=$n if [ -d /backup/$src ]; then { mv /backup/$src /backup/$dst; } fi; } ((n--)) done;

    Read the article

  • Time machine link error

    - by robinjam
    When attempting to perform a Time Machine backup, the backup appears to proceed as normal, until it finishes copying files at which point it complains that an "error occurred while linking files for" one of my external hard disks. During the previous backup that particular disk was in fact empty, and therefore I can't understand why Time Machine is attempting to link back to it. But alas. I've verified all my disks using Disk Utility and they all appear to be fine. Does anybody know what causes this error, and how I might go about fixing it? Failing that is there a way to force Time Machine to create a brand new backup rather than an incremental one? Thanks in advance!

    Read the article

  • Seriousness of a "Smart" disk error. How long will it last?

    - by Workshop Alex
    I have an 1 TB data disk and the bios and Windows are reporting a "Smart" error. At least, I get a Smart event but it doesn't indicate how serious the failure could be. My system is about 6 months old, including the disk so the warranty will cover the damage. Unfortunately, I lack a second disk of 1 TB in size which I can use to make a full backup. The most important data on this disk is safe, but there's a lot of work data which can be regenerated but this would cost a lot of time. So I ordered an USB disk of 1 TB which will arrive in three days. By then I can make a full backup of the data and afterwards, it can crash. But will the disk live that long? (Well, I won't use the PC as long as I can't make a backup.) How serious is such a Smart event? I know it's serious enough to have it replaced, but will it live for another week or could it die any moment?Update: I purchased an 1 TB external disk and spent most of the day making a backup of the 1 TB disk. It survived that. I then received a new disk, since it was still under warranty and replaced the hard disk. Then I had to spend most of a day again to put back the backup. I need to send back the faulty disk and now have an additional external disk, which could always be practical. :-) The Smart Error report did not cause any failures on the original disk. I won't advise to ignore these warnings, but the disk still has enough life in it to last a few more days. (Just make sure you have a good back-up.) And oh, the horror of having to make a complete backup such a huge disk. :-) If your data is important, make sure you have something that supports incremental backups and lots of space. (In my case, the data wasn't very important, just practical to have on-disk together.)

    Read the article

  • Restore files from certain increments using Duplicity

    - by luckytaxi
    Given the following backup sets ... Found primary backup chain with matching signature chain: ------------------------- Chain start time: Tue Jun 21 11:27:26 2011 Chain end time: Tue Jun 21 11:27:59 2011 Number of contained backup sets: 2 Total number of contained volumes: 2 Type of backup set: Time: Num volumes: Full Tue Jun 21 11:27:26 2011 1 Incremental Tue Jun 21 11:27:59 2011 1 If i run the following command, it works (1308655646 was converted from Tue Jun 21 11:27:26 2011): duplicity --no-encryption --restore-time 1308655646 --file-to-restore ORIG_FILE \ file:///storage/test/ restored-file.txt However, if I run the following command, it restores the from the latest set. duplicity --no-encryption --restore-time 2011-06-21T11:27:26 --file-to-restore \ ORIG_FILE file:///storage/test/ restored-file.txt What am I doing wrong w/ the time? I prefer the second option only because I don't want to have to do the conversion manually.

    Read the article

  • Script to mirror MS SQL Server databases between 2 servers

    - by David W
    Hi I have about 200 sites each of which have 2 servers running MSSQL (2k5 at some sites, 2k8 at others) One server is production and the other is primarily there as a backup. We're rebuilding all of these servers this year and as part of that we will have to set up mirroring for ... a lot ... of databases. Some of these sites have 45 databases so mirroring them manually is going to be a huge pain. I was going to write a batch script which uses SQLCMD to backup the database and log, copies to the secondary server, restores the backup and log with norecovery, creates the endpoints and sets the partner. This in itself isn't too complicated, but i'd love to see what other people have done as i'm not very confident in catching errors using the process i've outlined above. I've seen Tools to manage sql 2008 database mirroring? Which looks really good, but the formatting is jumbled and I can't get it to work. If anyone has any other scripts they've written and are willing to share I'd be eternally grateful. Ideally I'd love to be able to use a script to ensure there are matching endpoints (same ports) on both servers, backup the database, backup the log, copy the backups to second server, restore database and log with norecovery, set the partners on both servers, and somehow confirm that the databases are linked and synchronized. Well, thanks for reading :)

    Read the article

  • xcopy files and directory

    - by user1044937
    I have a folder named "C:\Jobs\job#1" , "C:\Jobs\job#2" "C:\Jobs\job#3" etc and a lot of directories and sub-directories under it. I want to get the all the directories under Jobs and xcopy them to C:\backup. Then I want to xcopy all the files under each Job#1, 2 ,3 etc. to C:\backup\job#1\month\\*.* To make it clearer. Source dir = C:\Jobs\job#1\"myfiles&dir" Destination dir = C:\Backup\job#1\month\"myfiles&dir" then do the next folder Source dir = C:\Jobs\job#2\"myfiles&dir" Destination dir = C:\Backup\job#2\month\"myfiles&dir" ...until all folders are back-up. Since the job folder keep increasing, by doing it this way I don't have to add extra code on this script except modify the month. Thank you.

    Read the article

  • Howto get exit code of a script started in screen session

    - by Bettina
    Hi folks, I am currently creating a backup script which uses screen to start a backup job with rsync inside a screen session. The backup jobs are started as follows. screen -dmS backup /usr/bin/rsync ... As soon as the rsync job is finished, the screen session is terminated automatically. To make sure, that the backup was successful, I would like to check the exit code of the rsync job but unfortunately I really don't know how to get the exit code after the screen was terminated. Does someone have a good idea how to automatically check, if the rsync job was successful or not? Would be great if someone does. I already thought about using a temp file but like this: screen -dmS myScreen "rsync -av ... ; echo $? /tmp/myExitCode" but this unfortunately does not work. Then I thought about using stderr like in the example below: screen -dmS myScreen "rsync -av ... 2 /tmp/rsync-sterr None of my ideas worked out so far, since stderr is not written when I use the command above. :-( ? Would be great if someone has a good idea or even a solution. Cheers, Bettina

    Read the article

  • Using robocopy and excluding multiple directories

    - by GorrillaMcD
    I'm trying to copy some directories from a server before I restore from backup (my latest backup was corrupt, so I have to use an older one :( ). I'm in the Windows Recovery Environment and have access to the server's file system G:\ and my backup media C:\. But, since I'm more familiar with Linux, I'm having a bit of trouble with the command line in Windows, specifically robocopy. I want to copy multiple directories (maintaining the same directory structure) from G:\ to C:\ while excluding others (namely, the Windows and Program Files folders). I can't figure out the syntax for the /XD option. I was hoping to do something like: robocopy G: C:\backup /CREATE /XD "dir1","dir2", ...

    Read the article

  • How to use rsync when filenames contain double quotes?

    - by wfoolhill
    I am trying to synchronize the content of the directory my_dir/ from /home to /backup. This directory contains a file which name has a double quote in it, such as to"to. Here is my rsync command: rsync -Cazh /home/my_dir/ /backup/my_dir/ And I get the following message: rsync: mkstemp "/backup/my_dir/.to"to.d93PZr" failed: Invalid argument (22) For info, rsync works well when the synchronized filenames contain single quote, parenthesis and space. Thus, why is it bugging with a double quote? Thanks for any help.

    Read the article

  • rsync --link-dest behaviour when run as sudo

    - by fotNelton
    In order to create regular backups, I'm using rsync together with --link-dest so as to create hard-links for unchanged files. For example: rsync -ax \ --partial --delete --delete-excluded --inplace \ --exclude-from=/tmp/temp_excludes \ --link-dest=/Volumes/Backup/current \ /Users /Volumes/Backup/2012-06-25 This works very well as long as I start the process from my normal user account. Though as soon as I start the process using sudo it behaves erradically, meaning that rsync copies all the unchanged files instead of hard-linking them. Since sudo modifies the environment, I've already also tried sudo -E in conjunction with making sure that my sudoers file has the corresponding option set. Well, that didn't work either. So, the question is, how can I run rsync using sudo? Whereas the above example only shows a backup of the Users directory, I also need to backup some system files that I can only access as root.

    Read the article

  • Only allow root to change filesystem

    - by Uejji
    The VPS I manage uses a simple hard link rsync archive daily backup system saved to a loop file. This is great, because each backup only takes up as much space as what has changed each day, and all user/group permissions are kept. I would like to give users direct access to their home directories in each backup, but I'm worried about intentional or accidental backup data destruction, as how it stands now users can actually change, destroy or add to backed up data they originally owned. I've been looking for a way to mount this filesystem similar to an ro mount option, but something that would still allow rw access to root, but I've had absolutely no luck. In other words, I want users to be able to view and copy their backed up data without actually being able to change it, and have that data maintain the original permissions. I've got no real preferences as far as filesystem, as long as it's a standard unix filesystem that can preserve permissions, support hard links and deny write access to users without actually stripping the w permission from everything.

    Read the article

  • What will Time Machine do when

    - by Joel Budgor
    When Time Machine says "I will delete the oldest files first" does it mean this literally. Here is a theoretical example. Source Drive: 300 GB, consisting of 1 280 GB file and a 1 GB file. Backup Drive: 300 GB The initial backup will backup both files, using 281 GB. If I modify the 1 GB file 21 times, what will Time machine do when I run out of room on the backup drive; Delete the original 280 GB because it is the oldest file or delete the oldest version of the file I have modified 21 times. I hope it would delete the oldest version of the file I have modified 21 times, but I want to be sure. Thanks, Joel Budgor

    Read the article

  • Sql database dumps failing every night

    - by chaseman36
    Hey guys, I have sql05 and my maintenance plan which backs up a database to an external storage SAN, has been failing every night. Here is my error: Executing the query "BACKUP DATABASE [master] TO DISK = N'\\192.168.x.x\vmbackup\server\dbbackup\master_backup_201004222300.bak' WITH NOFORMAT, NOINIT, NAME = N'master_backup_20100422230002', SKIP, REWIND, NOUNLOAD, STATS = 10 " failed with the following error: "Cannot open backup device '\\192.168.x.x\vmbackup\server\dbbackup\master_backup_201004222300.bak'. Operating system error 5(Access is denied.). BACKUP DATABASE is terminating abnormally.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. I googled this error and tried adding permissions to the backup device for network service as recommended at experts exchange, no dice. Does anyone have any ideas?

    Read the article

  • Crontab -- scheduling my backups

    - by Garfonzo
    I want to do a backup every Friday night (no, this is not the whole backup routine, just part of it). Each Friday night's backup will not be overwritten until 4 weeks later. So, essentially, I have a four revolving backups: Week1, week2, week3, and week4. Now, I need the week1 backup script to run every 4 weeks. But I also want week2's script to run every four weeks. I know that I can tell the crontab to execute something every X weeks/days/hours/whatever. However, how do I set it up so that each of these four scripts actually run on different weeks, how do I avoid all 4 scripts running on the same night, then dutifully waiting for weeks only to all run again? Thanks.

    Read the article

  • Optimizing JS Array Search

    - by The.Anti.9
    I am working on a Browser-based media player which is written almost entirely in HTML 5 and JavaScript. The backend is written in PHP but it has one function which is to fill the playlist on the initial load. And the rest is all JS. There is a search bar that refines the playlist. I want it to refine as the person is typing, like most media players do. The only problem with this is that it is very slow and laggy as there are about 1000 songs in the whole program and there is likely to be more as time goes on. The original playlist load is an ajax call to a PHP page that returns the results as JSON. Each item has 4 attirbutes: artist album file url I then loop through each object and add it to an array called playlist. At the end of the looping a copy of playlist is created, backup. This is so that I can refine the playlist variable when people refine their search, but still repopulated it from backup without making another server request. The method refine() is called when the user types a key into the searchbox. It flushes playlist and searches through each property (not including url) of each object in the backup array for a match in the string. If there is a match in any of the properties, it appends the information to a table that displays the playlist, and adds it to the object to playlist for access by the actual player. Code for the refine() method: function refine() { $('#loadinggif').show(); $('#library').html("<table id='libtable'><tr><th>Artist</th><th>Album</th><th>File</th><th>&nbsp;</th></tr></table>"); playlist = []; for (var j = 0; j < backup.length; j++) { var sfile = new String(backup[j].file); var salbum = new String(backup[j].album); var sartist = new String(backup[j].artist); if (sfile.toLowerCase().search($('#search').val().toLowerCase()) !== -1 || salbum.toLowerCase().search($('#search').val().toLowerCase()) !== -1 || sartist.toLowerCase().search($('#search').val().toLowerCase()) !== -1) { playlist.push(backup[j]); num = playlist.length-1; $("<tr></tr>").html("<td>" + num + "</td><td>" + sartist + "</td><td>" + salbum + "</td><td>" + sfile + "</td><td><a href='#' onclick='setplay(" + num +");'>Play</a></td>").appendTo('#libtable'); } } $('#loadinggif').hide(); } As I said before, for the first couple of letters typed, this is very slow and laggy. I am looking for ways to refine this to make it much faster and more smooth.

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >