Search Results

Search found 57986 results on 2320 pages for 'breadth first search'.

Page 87/2320 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • My search what the Cloud will mean for my Work

    - by Kay Sellenrode
    Since I finished my MCM Exchange 2007 training back in April 2009 I’m struggling with the Cloud. I know it will change the way we do things today, but how will it affect my work. My work is Exchange consultancy mostly in the Netherlands, but more and more across the globe.   In my job as a consultant I noticed last year that a large percentage of my customers showed interest in the cloud services available today. But in most situations it seemed that it wasn’t the right time for them to switch to a cloud service at this moment. Right now I’m helping one of my customers is exploring Exchange online and it looks like they will switch over from their on-premise Exchange solution. This made me more than ever realize that I need to do something to not miss the boat.     With Office 365 coming this year, my idea is that Cloud services will take off from now. Also I’m sure that quite some customers will expect me to help them with their decision between the cloud and the on premise solution. So in the next months I will explore all the possibilities of Office 365, but also some of the competition in this field.   In my search for what the cloud will mean for me and my customers, I will go over all the aspects of the offered solutions. Any help in my search is always welcome. I’m looking forward to ideas people have around the cloud and how it will change the IT environment, especially in the Unified communications field.   Next week I will post my first article about my experiences with the cloud until now.

    Read the article

  • USB Device first mounted as root, then by user

    - by Petr Marek
    When I connect my Kindle, it shows up as an usb0 media, which I can read but not write (owner = root). However, if I do sudo umount /media/usb0, usb0 gets unmounted and a Kindle media gets mounted properly (is writable etc.). What can cause such strange behavior? It's not only with Kindle, but with Flash drives etc. as well. My /etc/fstab: # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda2 during installation UUID=595815c2-d882-4ec8-a2cd-cce70471167c / ext4 errors=remount-ro 0 1 # /boot was on /dev/sda6 during installation #UUID=1340a336-66ca-4743-a6e4-41a307af2dda /boot ext4 defaults 0 3 # swap was on /dev/sda5 during installation UUID=afa49f1d-d505-4166-82a2-2f44548a48c6 none swap sw 0 0 UUID=deb86039-528a-45f3-b5f9-ce528740c94e /data_hdd ext4 defaults 0 2 My groups: petr@sova:~$ groups petr petr : petr adm cdrom sudo dip plugdev fuse lpadmin sambashare bumblebee

    Read the article

  • Allegheny first-years dive into Fedora

    <b>Opensource.com:</b> "Over the course of fourteen weeks, we've introduced them to the Creative Commons, blogging, and open source software in the context of social change, trying to get them ready for their dive into the Fedora project."

    Read the article

  • Search SSIS packages for table/column references

    - by Nigel Rivett
    A lot of companies now use TFS or some other system and keep all their packages in a single project. This means that a copy of all the packages will end up on your local disk. There is major failing with SSIS that it is sometimes quite difficult to find what a package is actually doing, what it accesses and what it affects. This is a simple dos script which will search through all packages in a folder for a string and write the names of found packages to an output file. Just copy the text to a .bat file (I use aaSearch.bat) in the folder with all the package scripts Change the output filename (twice), change the find string value and run it in a dos window. It works on any text file type so you can also search store procedure scripts – but there are easier ways of doing that. echo. > aaSearch_factSales.txt for /f “delims=” %%a in (‘dir /B /s *.dtsx’) do call :subr “%%a” goto:EOF :subr findstr “factSales” %1 if %ERRORLEVEL% NEQ 1 echo %1 >> aaSearch_factSales.txt goto:EOF

    Read the article

  • The first MeeGo release

    <b>LWN:</b> "Today is the culmination of a huge effort by the worldwide Nokia and Intel teams to share the MeeGo operating system code with the open source community. This is the latest step in the full merger of Maemo and Moblin..."

    Read the article

  • # id - urls with id first display full page, then move to #id

    - by guisasso
    I've noticed this in the new version of chrome, and ie9 and 10. Some urls in a photo gallery have a #id tag as they are supposed to display a full view of a picture. Basically, a div in a lower position on the page has that #id that i call via a.com/1.html#id. This has never been an issue until lately, when i noticed a bit of a lag. The issue: The website loads normally, then the view moves to the #id as supposed, but with some lag sometimes, perhaps because of the high resolution of the picture, which is somewhat noticeable. Anyway to avoid this, or make it so the page would move to the correct #id even before fully loaded?

    Read the article

  • We've completed the first iteration

    - by CliveT
    There are a lot of features in C# that are implemented by the compiler and not by the underlying platform. One such feature is a lambda expression. Since local variables cannot be accessed once the current method activation finishes, the compiler has to go out of its way to generate a new class which acts as a home for any variable whose lifetime needs to be extended past the activation of the procedure. Take the following example:     Random generator = new Random();     Func func = () = generator.Next(10); In this case, the compiler generates a new class called c_DisplayClass1 which is marked with the CompilerGenerated attribute. [CompilerGenerated] private sealed class c__DisplayClass1 {     // Fields     public Random generator;     // Methods     public int b__0()     {         return this.generator.Next(10);     } } Two quick comments on this: (i)    A display was the means that compilers for languages like Algol recorded the various lexical contours of the nested procedure activations on the stack. I imagine that this is what has led to the name. (ii)    It is a shame that the same attribute is used to mark all compiler generated classes as it makes it hard to figure out what they are being used for. Indeed, you could imagine optimisations that the runtime could perform if it knew that classes corresponded to certain high level concepts. We can see that the local variable generator has been turned into a field in the class, and the body of the lambda expression has been turned into a method of the new class. The code that builds the Func object simply constructs an instance of this class and initialises the fields to their initial values.     c__DisplayClass1 class2 = new c__DisplayClass1();     class2.generator = new Random();     Func func = new Func(class2.b__0); Reflector already contains code to spot this pattern of code and reproduce the form containing the lambda expression, so this is example is correctly decompiled. The use of compiler generated code is even more spectacular in the case of iterators. C# introduced the idea of a method that could automatically store its state between calls, so that it can pick up where it left off. The code can express the logical flow with yield return and yield break denoting places where the method should return a particular value and be prepared to resume.         {             yield return 1;             yield return 2;             yield return 3;         } Of course, there was already a .NET pattern for expressing the idea of returning a sequence of values with the computation proceeding lazily (in the sense that the work for the next value is executed on demand). This is expressed by the IEnumerable interface with its Current property for fetching the current value and the MoveNext method for forcing the computation of the next value. The sequence is terminated when this method returns false. The C# compiler links these two ideas together so that an IEnumerator returning method using the yield keyword causes the compiler to produce the implementation of an Iterator. Take the following piece of code.         IEnumerable GetItems()         {             yield return 1;             yield return 2;             yield return 3;         } The compiler implements this by defining a new class that implements a state machine. This has an integer state that records which yield point we should go to if we are resumed. It also has a field that records the Current value of the enumerator and a field for recording the thread. This latter value is used for optimising the creation of iterator instances. [CompilerGenerated] private sealed class d__0 : IEnumerable, IEnumerable, IEnumerator, IEnumerator, IDisposable {     // Fields     private int 1__state;     private int 2__current;     public Program 4__this;     private int l__initialThreadId; The body gets converted into the code to construct and initialize this new class. private IEnumerable GetItems() {     d__0 d__ = new d__0(-2);     d__.4__this = this;     return d__; } When the class is constructed we set the state, which was passed through as -2 and the current thread. public d__0(int 1__state) {     this.1__state = 1__state;     this.l__initialThreadId = Thread.CurrentThread.ManagedThreadId; } The state needs to be set to 0 to represent a valid enumerator and this is done in the GetEnumerator method which optimises for the usual case where the returned enumerator is only used once. IEnumerator IEnumerable.GetEnumerator() {     if ((Thread.CurrentThread.ManagedThreadId == this.l__initialThreadId)               && (this.1__state == -2))     {         this.1__state = 0;         return this;     } The state machine itself is implemented inside the MoveNext method. private bool MoveNext() {     switch (this.1__state)     {         case 0:             this.1__state = -1;             this.2__current = 1;             this.1__state = 1;             return true;         case 1:             this.1__state = -1;             this.2__current = 2;             this.1__state = 2;             return true;         case 2:             this.1__state = -1;             this.2__current = 3;             this.1__state = 3;             return true;         case 3:             this.1__state = -1;             break;     }     return false; } At each stage, the current value of the state is used to determine how far we got, and then we generate the next value which we return after recording the next state. Finally we return false from the MoveNext to signify the end of the sequence. Of course, that example was really simple. The original method body didn't have any local variables. Any local variables need to live between the calls to MoveNext and so they need to be transformed into fields in much the same way that we did in the case of the lambda expression. More complicated MoveNext methods are required to deal with resources that need to be disposed when the iterator finishes, and sometimes the compiler uses a temporary variable to hold the return value. Why all of this explanation? We've implemented the de-compilation of iterators in the current EAP version of Reflector (7). This contrasts with previous version where all you could do was look at the MoveNext method and try to figure out the control flow. There's a fair amount of things we have to do. We have to spot the use of a CompilerGenerated class which implements the Enumerator pattern. We need to go to the class and figure out the fields corresponding to the local variables. We then need to go to the MoveNext method and try to break it into the various possible states and spot the state transitions. We can then take these pieces and put them back together into an object model that uses yield return to show the transition points. After that Reflector can carry on optimising using its usual optimisations. The pattern matching is currently a little too sensitive to changes in the code generation, and we only do a limited analysis of the MoveNext method to determine use of the compiler generated fields. In some ways, it is a pity that iterators are compiled away and there is no metadata that reflects the original intent. Without it, we are always going to dependent on our knowledge of the compiler's implementation. For example, we have noticed that the Async CTP changes the way that iterators are code generated, so we'll have to do some more work to support that. However, with that warning in place, we seem to do a reasonable job of decompiling the iterators that are built into the framework. Hopefully, the EAP will give us a chance to find examples where we don't spot the pattern correctly or regenerate the wrong code, and we can improve things. Please give it a go, and report any problems.

    Read the article

  • Search network device from LAN through my C++ application and change the IP address

    - by Arun Kumar K S
    I am developing an application in C++ to communicate with my network device. I used UDP classes to search the device from the network. I done the code in such a way that from my application a broadcast message will send to the local network. The device will respond to the broadcast message and the application will get the IP address from that response. After establishing a network communication send a message to the device for changing the IP address. That worked fine if my devices IP address is correct. But when I set a wrong IP address and subnet to the device. My application will never get any messages from the device. So I can't able communicate to the device and not able get the device and unable to change the IP address etc. Say example IP address of the device 20.1.1.1 Subnet Mask 255.0.0.0 And in my system that runs the application IP address 192.168.1.23 Subnet Mask 255.255.255.0 I tried the Lantronix device installation software with their Lantronix device in network. It listed the device from the network and I am able to change the IP address from their software. Any one know how this is done in this type of software? How I can search in network to find the device and change the IP address when its IP address is not in range? Which protocol they used to find the device?

    Read the article

  • How to Archive, Search, and View Your Tweet Statistics with ThinkUp

    - by YatriTrivedi
    Worried about archiving your tweets? Want a more powerful search? Want to see your tweet statistics? You can do all of that and more by installing ThinkUp on your home server. ThinkUp is a brilliant application (currently in beta) that will archive all of your tweets, your replies, responses, etc. so that you can search through them and find out some helpful usage statistics. It has quite a few plugins, including one that adds full Facebook support, too. It’s designed to be installed on a LAMP server; that is, Linux, Apache, MySQL, and PHP is what will provide the backbone for it. While it’s possible to install it on a Windows- or Mac-based machine, it’s most easily handled in Linux, so we’ll be using Ubuntu to show you how to get it up and running. It’s in very active development by the founder, Gina Trapani, and by many users in the community Latest Features How-To Geek ETC How to Recover that Photo, Picture or File You Deleted Accidentally How To Colorize Black and White Vintage Photographs in Photoshop How To Get SSH Command-Line Access to Windows 7 Using Cygwin The How-To Geek Video Guide to Using Windows 7 Speech Recognition How To Create Your Own Custom ASCII Art from Any Image How To Process Camera Raw Without Paying for Adobe Photoshop What is the Internet? From the Today Show January 1994 [Historical Video] Take Screenshots and Edit Them in Chrome and Iron Using Aviary Screen Capture Run Android 3.0 on a Hacked Nook Google Art Project Takes You Inside World Famous Museums Emerald Waves and Moody Skies Wallpaper Change Your MAC Address to Avoid Free Internet Restrictions

    Read the article

  • How to get that first development job

    - by cju
    I have been in QA for 10 years, trying to get into developement for about 5 of them. I have taken classes in C++, Java and C#. I was able to write some tools and unit tests in C# at my current job and (by all accounts) did a good job of it. However, 8 months ago, my employer tasked me with the responsibility of establishing the new QA group. Now, I'm doing manual testing and deployment with no promise of returning to development. I have looked at the job boards and there are a lot of jobs for Web developers and wondered how I could break into that. I've picked up some books on Ruby on Rails that I plan to work through on the Mac at home, but I'm not sure employers would be interested in anything but commercial web development. Do you have any suggestions on how I can use my experience to get a job as a junior developer? And I mean one that entailes programming...the postings I've seen for junior developer amount to doing all the grunt work besides coding. They should just call them "Technical Secretaries".

    Read the article

  • My First Post with Windows Live Writer

    - by geekrutherford
    I receive daily newsletters from DotNetSlackers regarding various .NET topics.  Today I read an article from an apparent Microsoft employee who gave some insight to the organizational culture within the company.  Always on the lookout for new tools and technologies I noted that he used Windows Live Writer for editing and managing his blog content.  I thought I’d give it a try. Let’s try adding a picture and adjusting it’s placement within this blog post relative to this text. … Adding the image is quite simple using the “Insert” options given to the right of the blog content editor.  Inserting without using a table makes aligning text just so impossible, but that’s inherent with any WYSIWYG editor.  Instead using a table with at least 2 columns (1 for text and 1 for the image) works best.   Let’s try adding a map!   That’s pretty sweet!  You can map to any location within the editor itself.  A dialog opens which utilizes Bing! allowing you to enter the address, etc. Well, that’s enough for me.  Time to pimp this to my wife for use on our family blog.  BTW, Windows Live Writer allows you to post content to a number of blogging sites…fantastic!!!

    Read the article

  • Language redirect affecting pagerank and search listing?

    - by Janoszen
    Preface We have a number of sites that use the same redirect mechanism across the board. We recently transitioned one site from non-localised to localised and detected that the Google+ integration doesn't show up on the search results any more AND the PageRank is gone from 2 to 0. How the redirect works If the UA sends a cookie (e.g. lang=en), redirect the user to /language (e.g. /en) If the UA is a bot (.*bot.*), redirect to /en If the Accept-Language header contains a usable, non-English language, redirect to /language (English is the default on many browsers in non-English regions) If there is a valid GeoIP lookup and the detected region is linked to a supported language, redirect to /language Redirect to /en We do of course on all pages have the proper markup to indicate the alternate language: <link hreflang="de" href="/de" rel="alternate" /> As far as we can tell, we follow all publicly available guidelines from Google, so we are a bit at odds if this is a bug in Google or we have done something wrong. Question Does not having content on the root URL of a domain adversely affect search engine rankings and if yes, how does one implement a proper language redirection?

    Read the article

  • 24 Hours of PASS – first reflections

    - by Rob Farley
    A few days after the end of 24HOP, I find myself reflecting on it. I’m still waiting on most of the information. I want to be able to discover things like where the countries represented on each of the sessions, and things like that. So far, I have the feedback scores and the numbers of attendees. The data was provided in a PDF, so while I wait for it to appear in a more flexible format, I’ve pushed the 24 attendee numbers into Excel. This chart shows the numbers by time. Remember that we started at midnight GMT, which was 10:30am in my part of the world and 8pm in New York. It’s probably no surprise that numbers drooped a bit at the start, stayed comparatively low, and then grew as the larger populations of the English-speaking world woke up. I remember last time 24HOP ran for 24 hours straight, there were quite a few sessions with less than 100 attendees. None this time though. We got close, but even when it was 4am in New York, 8am in London and 7pm in Sydney (which would have to be the worst slot for attracting people), we still had over 100 people tuning in. As expected numbers grew as the UK woke up, and even more so as the US did, with numbers peaking at 755 for the “3pm in New York” session on SQL Server Data Tools. Kendra Little almost reached those numbers too, and certainly contributed the biggest ‘spike’ on the chart with her session five hours earlier. Of all the sessions, Kendra had the highest proportion of ‘Excellent’s for the “Overall Evaluation of the session” question, and those of you who saw her probably won’t be surprised by that. Kendra had one of the best ranked sessions from the 24HOP event this time last year (narrowly missing out on being top 3), and she has produced a lot of good video content since then. The reports indicate that there were nearly 8.5 thousand attendees across the 24 sessions, averaging over 350 at each one. I’m looking forward to seeing how many different people that was, although I do know that Wil Sisney managed to attend every single one (if you did too, please let me know). Wil even moderated one of the sessions, which made his feat even greater. Thanks Wil. I also want to send massive thanks to Dave Dustin. Dave probably would have attended all of the sessions, if it weren’t for a power outage that forced him to take a break. He was also a moderator, and it was during this session that he earned special praise. Part way into the session he was moderating, the speaker lost connectivity and couldn’t get back for about fifteen minutes. That’s an incredibly long time when you’re in a live presentation. There were over 200 people tuned in at the time, and I’m sure Dave was as stressed as I was to have a speaker disappear. I started chasing down a phone number for the speaker, while Dave spoke to the audience. And he did brilliantly. He started answering questions, and kept doing that until the speaker came back. Bear in mind that Dave hadn’t expected to give a presentation on that topic (or any other), and was simply drawing on his SQL expertise to get him through. Also consider that this was between midnight at 1am in Dave’s part of the world (Auckland, NZ). I would’ve been expecting just to welcome people, monitor questions, probably read some out, and in general, help make things run smoothly. He went far beyond the call of duty, and if I had a medal to give him, he’d definitely be getting one. On the whole, I think this 24HOP was a success. We tried a different platform, and I think for the most part it was a popular move. We didn’t ask the question “Was this better than LiveMeeting?”, but we did get a number of people telling us that they thought the platform was very good. Some people have told me I get a chance to put my feet up now that this is over. As I’m also co-ordinating a tour of SQLSaturday events across the Australia/New Zealand region, I don’t quite get to take that much of a break (plus, there’s the little thing of squeezing in seven SQL 2012 exams over the next 2.5 weeks). But I am pleased to be reflecting on this event rather than anticipating it. There were a number of factors that could have gone badly, but on the whole I’m pleased about how it went. A massive thanks to everyone involved. If you’re reading this and thinking you wish you could’ve tuned in more, don’t worry – they were all recorded and you’ll be able to watch them on demand very soon. But as well as that, PASS has a stream of content produced by the Virtual Chapters, so you can keep learning from the comfort of your desk all year round. More info on them at sqlpass.org, of course.

    Read the article

  • Azure Search Preview

    - by Greg Low
    One of the things I’ve been keeping an eye on for quite a while now is the development of the Azure Search system. While it’s not a full replacement for the full-text indexing service in SQL Server on-premises as yet, it’s a really, really good start. Liam Cavanagh, Pablo Castro and the team have done a great job bringing this to the preview stage and I suspect it could be quite popular. I was very impressed by how they incorporated quite a bit of feedback I gave them early on, and I’m sure that others involved would have felt the same. There are two tiers at present. One is a free tier and has shared resources; the other is currently $125/month and has reserved resources. I would like to see another tier between these two, much the same way that Azure websites work. If you have any feedback on this, now would be a good time to make it known. In the meantime, given there is a free tier, there’s no excuse to not get out and try it. You’ll find details of it here: http://azure.microsoft.com/en-us/documentation/services/search/ I’ll be posting more info about this service, and showing examples of it during the upcoming months.

    Read the article

  • Managing Your First SharePoint Project or Team

    - by Mark Rackley
    (*editor’s note* If you have proper SharePoint Training, know the difference between a site and a site collection, and have the utmost respect for the knowledge of your SharePoint team skip this blog and go directly to meetdux.com, do not pass go, do not collect $200… otherwise, please proceed) Dear Mr. or Mrs. I-know-nothing-about-SharePoint-but-hey,-I-have-manager-in-my-title-so-I’ll-tell-you-how-to-your-job, Thank you so much for joining the Acme corporation. We appreciate your eagerness and willingness to jump in and help us accomplish all of our goals here at acme (these roadrunner rockets don’t make themselves). You may have noticed that we have this thing called SharePoint lying around and we have invested some time in money to make it not a complete piece of garbage. So, I thought I’d give you some pointers to help make your stay here enjoyable and productive. Yeah… you don’t really know SharePoint Just because you had a mysite at your last organization or had a SharePoint 2003 team site does NOT mean you comprehend the vastness that is SharePoint. You don’t know what’s going on behind the scenes. You don’t know what should and should not be done. No, we CAN’T just query the SQL database directly. Yes, it really does take that long. No, we can’t do that out-of-the-box. Your experience doesn’t mean as much as you think it means… Yes, I’m aware that you co-created the internet with Al Gore and have been managing projects since I was blowing up GI Joe figures with firecrackers, however SharePoint is not like anything you have worked with before from a management perspective. Please don’t tell us the proper way to do our job or tell us how “you” would do it, and PLEASE don’t utter the words “I used to do some .NET development so let me know if you get stuck and need some guidance.” It MAY be possible for a incredible project manager to manage a SharePoint project and not understand the technology, but if you force your ideas on us or treat us like we don’t really know what we’re doing then you will prove yourself to NOT be one of those types. Oh no you didn’t… Please don’t tell us how you can bring in a group of guys of Kazakhstan to do the project for $20/hr. There are many companies out there who can do some really crappy SharePoint work and we don’t want to be stuck maintaining their junk. Do you know what it means to deploy a solution? Neither do some of those companies out there. However, there are are few AWESOME consulting firms out there but $150/hr is cheap for these guys. Believe me, it’s worth it though. You get what you pay for! Show us some respect We truly do appreciate and value your opinion and experience, but when we tell you something is different in SharePoint don’t be condescending and dismiss OUR experience and opinions. We have spent a lot of time and energy learning a very complicated technology that can open up a world of possibilities when used properly. We just want to make sure it is used properly. It’s not the same as .NET development. It’s not like a regular web application. There’s more going on behind the scenes than you can possibly fathom. Have a little faith in us please and listen when we talk. You may actually learn a thing or two. Take some time to learn the technology There is hope… you don’t have to be totally worthless. Take some time to learn SharePoint. Learn what it is and what it can do. Invest some time in learning our SharePoint environment. What’s our logical architecture and taxonomy? What governance do we have in place? If you just thought “huh?” then yes, I’m talking to you. Sincerely, Your SharePoint Team (This rant is not pointed at any particular organization or person. If you think it’s about you, you are wrong. This is just a general rant based upon things people have told me and things I’ve seen. If you don’t think it applies to you, please move on. If you think you might be guilty of handling your SharePoint team the wrong way, then just please listen, learn, and have a little faith in your team. You all have the same goal in mind. Also, take the time to learn something about SharePoint, you will all be less frustrated with each other.)

    Read the article

  • My first time in the gambling industry

    - by sfrj
    I am a Java enterprise developer with almost 3 years of professional experience. Soon i am going to have a face to face interview with a company in the gambling industry. I already did successfully a phone screening and now for the personal interview i suppose they will ask me about some kind of white board problem or system design task. I think i am in the right place to ask about this, and would appreciate a lot if someone would give me some tips or share something related to his own experience. The things i am more interested in regarding my interview are: What are the most common challenges for programmers, in this industry? Any idea or suggestion on a white board problem they may ask me? Could you point me to some links where i can find information on the topic or sample problems in this industry?. I personally find this question very interesting not just for me. Also i think, the given answers can help also others in a similar situation. Just what i want to say whit this last comment is: Please avoid, answers like: www.google.com and so on...

    Read the article

  • Data indexing frameworks fit for large E-Commerce applications

    - by Dabu
    we wrote and still maintain a large E-Commerce application. Our feature list resembles what you would expect from most shops. We'd like to improve some of our features, and now the search/suggestion list functionality (enter some letters, a JScripted suggestion list appears) has caught our eye. Currently, we use http://xapian.org/. It has some drawbacks. Firstly, it's not actually the right solution. It has been created to index documents, not ever-changing data in a granularity that an E-Commerce application would need. Secondly, the load on the database is significant when we reindex all data every night. We'd like a framework that has been designed for indexing database data, which can add to the index easily and without much load, which can supply data changes in the backoffice quickly to the frontend without much load and delay. I'm aware of the fact that Xapian is Open Source and even Free Software, so we could adapt it to our needs if we decided to invest the time and manpower. But taking a quick look around for a solution more suited seems fair, right? Oh, and commercial applications are fine, too. FOSS is not required. Thanks a bunch.

    Read the article

  • Week in Geek: Microsoft Warns of First Critical Security Flaws in Windows 8 & RT

    - by Asian Angel
    This week’s edition of WIG is filled with news link coverage on topics such as Mozilla Firefox turns 8 and Android turns 5, Windows (File) Explorer is the app that crashes most on Windows 8, Classic Mode (Session) will be dropped from GNOME 3.8, and more. 6 Ways Windows 8 Is More Secure Than Windows 7 HTG Explains: Why It’s Good That Your Computer’s RAM Is Full 10 Awesome Improvements For Desktop Users in Windows 8

    Read the article

  • Trim on encrypted SSD--Urandom first?

    - by cb474
    My understanding (I'm not sure I'm getting this all right) is that if one uses Trim on an encrypted SSD, it defeats some of the security benefits, because the drive will write zeros to empty space (as files are deleted). See: http://www.askubuntu.com/questions/115823/trim-on-an-encrypted-ssd And: http://asalor.blogspot.com/2011/08/trim-dm-crypt-problems.html My question is: From the perspective of the performance of the SSD and the functioning of Trim, would it therefore be better to simply zero out the SSD, before setting up an encrypted system, rather than writing random data to the drive, with urandom, as one usually does? Would this basically leave one with the same level of security anyway? And more importantly, would it better enable the Trim functionality to work as intended, with the encrypted SSD?

    Read the article

  • Tackling thin content on an images gallery

    - by Ted Wilmont
    We run an images gallery as part of our site, however we have over 8,000 images and every image has a separate HTML page of its own to display the image caption, related image and comments from users of the site. This seems to be a problem especially with the Google Panda update because these pages are technically "thin content". What would be the best way to tackle this? We'd love some feedback and advice regarding this scenario. We have a few options we thought of already but can't decide: We could noindex the separate image pages and loose any image search listings we have for the image in favour of removing these thin pages from the index. We could 301 all of the individual image pages back to the image category listing and anchor each image (e.g. #img2122) and include all of the comments and description on the category listing page itself. If we was to simply list all of the images and content on the category pages themself; what's the best method? We could add all of the content in the anchor tags and use jQuery to display them in a box when a user clicks on the image or we could use Ajax to retrieve the information. However, what's the best Ajax method for SEO? Any ideas, suggestions, tips or advice is greatly appreciated and thank you in advance for any given.

    Read the article

  • Why does Google Chrome ignore "last_known_google_url" property in "Local State" file?

    - by Peter Sivák
    I want to force my Google Chrome web browser (version 21.0.1180.89, 64-bit) to use non-localized search (thus google in english) through address bar, using the default Google search engine. To achieve that, I have to change value of the property last_known_google_url to https://www.google.com/?hl=en& in Local State file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Local State). In that file, there should be the property: "browser": { "last_known_google_url": but it is not. Even if I add there the property, it has no impact on search - Google Chrome does not use the property and still searches in localized version. Another option is to put the property to Preferences file (for instance on Linux, the full path to the file is ~/.config/google-chrome/Default/Preferences) - which works perfectly when I start Google Chrome and do some search - but just after that, the property (actually the whole Preferences file) is overriden, so "the most important" trailing part ?hl=en& of the property value is removed - and without it, the non-localized search does not work anymore. Why does Google Chrome ignore last_known_google_url property in Local State file?

    Read the article

  • MySQL for Beginners course - first steps to lowering your Database TCOs

    - by Antoinette O'Sullivan
    Thinking about lowering your Database TCO by using the MySQL Server? Don't miss the chance to get training from the source! With the newly released MySQL for Beginners class, learn how this powerful relational database management system can make your life easier and more fun! This course covers all the basics and will get you on your way, with a solid foundation. This instructor led, hands-on class covers the fundamentals of SQL and relational databases, using MySQL as a teaching tool. Send information about this course release to a friend who might be considering getting started on the world's most popular small footprint database.

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >