Search Results

Search found 4304 results on 173 pages for 'bytes'.

Page 87/173 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• How do I convert c struct from dll to C#

  - by poco

  I am converting a application from c++ to C# and have a question about the proper way to handle importing structs. I am attempting to convert a struct from a c dll into c# The struct in c looks like this typedef struct card_info { ushort r; ushort s; enum_a a; usinged long ul; ushort n; ushort* b; ushort id; } CARD_INFO; when i use [StructLayout(LayoutKind.Sequentaial)] the size of the array is 20 bytes in c#. However, if take a look at my working c++ code it is 24 bytes. I changed my c# to look like this: [StructLayout(LayoutKind.Explicit)] public struct CardInfo { [FieldOffset(0) public ushort r; [FieldOffset(2) public ushort s; [FieldOffset(4) public EnumA a; [FieldOffset(8) public ushort ul; [FieldOffset(12) public ushort n; [FieldOffset(16) public UInt32 b; [FieldOffset(20) public ushort id; } This seems to compile but I'm not convinced this is the correct way to go about doing this. Please let me know if this is correct or if there is a better way. Thanks

  Read the article

• 12c - flashforward, flashback or see it as of now...

  - by noreply(at)blogger.com (Thomas Kyte)

  Oracle 9i exposed flashback query to developers for the first time.  The ability to flashback query dates back to version 4 however (it just wasn't exposed).  Every time you run a query in Oracle it is in fact a flashback query - it is what multi-versioning is all about.However, there was never a flashforward query (well, ok, the workspace manager has this capability - but with lots of extra baggage).  We've never been able to ask a table "what will you look like tomorrow" - but now we do.The capability is called Temporal Validity.  If you have a table with data that is effective dated - has a "start date" and "end date" column in it - we can now query it using flashback query like syntax.  The twist is - the date we "flashback" to can be in the future.  It works by rewriting the query to transparently the necessary where clause and filter out the right rows for the right period of time - and since you can have records whose start date is in the future - you can query a table and see what it would look like at some future time.Here is a quick example, we'll start with a table:ops$tkyte%ORA12CR1> create table addresses  2  ( empno       number,  3    addr_data   varchar2(30),  4    start_date  date,  5    end_date    date,  6    period for valid(start_date,end_date)  7  )  8  /Table created.the new bit is on line 6 (it can be altered into an existing table - so any table  you have with a start/end date column will be a candidate).  The keyword is PERIOD, valid is an identifier I chose - it could have been foobar, valid just sounds nice in the query later.  You identify the columns in your table - or we can create them for you if they don't exist.  Then you just create some data:ops$tkyte%ORA12CR1> insert into addresses (empno, addr_data, start_date, end_date )  2  values ( 1234, '123 Main Street', trunc(sysdate-5), trunc(sysdate-2) );1 row created.ops$tkyte%ORA12CR1>ops$tkyte%ORA12CR1> insert into addresses (empno, addr_data, start_date, end_date )  2  values ( 1234, '456 Fleet Street', trunc(sysdate-1), trunc(sysdate+1) );1 row created.ops$tkyte%ORA12CR1>ops$tkyte%ORA12CR1> insert into addresses (empno, addr_data, start_date, end_date )  2  values ( 1234, '789 1st Ave', trunc(sysdate+2), null );1 row created.and you can either see all of the data:ops$tkyte%ORA12CR1> select * from addresses;     EMPNO ADDR_DATA                      START_DAT END_DATE---------- ------------------------------ --------- ---------      1234 123 Main Street                27-JUN-13 30-JUN-13      1234 456 Fleet Street               01-JUL-13 03-JUL-13      1234 789 1st Ave                    04-JUL-13or query "as of" some point in time - as  you can see in the predicate section - it is just doing a query rewrite to automate the "where" filters:ops$tkyte%ORA12CR1> select * from addresses as of period for valid sysdate-3;     EMPNO ADDR_DATA                      START_DAT END_DATE---------- ------------------------------ --------- ---------      1234 123 Main Street                27-JUN-13 30-JUN-13ops$tkyte%ORA12CR1> @planops$tkyte%ORA12CR1> select * from table(dbms_xplan.display_cursor);PLAN_TABLE_OUTPUT-------------------------------------------------------------------------------SQL_ID  cthtvvm0dxvva, child number 0-------------------------------------select * from addresses as of period for valid sysdate-3Plan hash value: 3184888728-------------------------------------------------------------------------------| Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Time     |-------------------------------------------------------------------------------|   0 | SELECT STATEMENT  |           |       |       |     3 (100)|          ||*  1 |  TABLE ACCESS FULL| ADDRESSES |     1 |    48 |     3   (0)| 00:00:01 |-------------------------------------------------------------------------------Predicate Information (identified by operation id):---------------------------------------------------   1 - filter((("T"."START_DATE" IS NULL OR              "T"."START_DATE"<=SYSDATE@!-3) AND ("T"."END_DATE" IS NULL OR              "T"."END_DATE">SYSDATE@!-3)))Note-----   - dynamic statistics used: dynamic sampling (level=2)24 rows selected.ops$tkyte%ORA12CR1> select * from addresses as of period for valid sysdate;     EMPNO ADDR_DATA                      START_DAT END_DATE---------- ------------------------------ --------- ---------      1234 456 Fleet Street               01-JUL-13 03-JUL-13ops$tkyte%ORA12CR1> @planops$tkyte%ORA12CR1> select * from table(dbms_xplan.display_cursor);PLAN_TABLE_OUTPUT-------------------------------------------------------------------------------SQL_ID  26ubyhw9hgk7z, child number 0-------------------------------------select * from addresses as of period for valid sysdatePlan hash value: 3184888728-------------------------------------------------------------------------------| Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Time     |-------------------------------------------------------------------------------|   0 | SELECT STATEMENT  |           |       |       |     3 (100)|          ||*  1 |  TABLE ACCESS FULL| ADDRESSES |     1 |    48 |     3   (0)| 00:00:01 |-------------------------------------------------------------------------------Predicate Information (identified by operation id):---------------------------------------------------   1 - filter((("T"."START_DATE" IS NULL OR              "T"."START_DATE"<=SYSDATE@!) AND ("T"."END_DATE" IS NULL OR              "T"."END_DATE">SYSDATE@!)))Note-----   - dynamic statistics used: dynamic sampling (level=2)24 rows selected.ops$tkyte%ORA12CR1> select * from addresses as of period for valid sysdate+3;     EMPNO ADDR_DATA                      START_DAT END_DATE---------- ------------------------------ --------- ---------      1234 789 1st Ave                    04-JUL-13ops$tkyte%ORA12CR1> @planops$tkyte%ORA12CR1> select * from table(dbms_xplan.display_cursor);PLAN_TABLE_OUTPUT-------------------------------------------------------------------------------SQL_ID  36bq7shnhc888, child number 0-------------------------------------select * from addresses as of period for valid sysdate+3Plan hash value: 3184888728-------------------------------------------------------------------------------| Id  | Operation         | Name      | Rows  | Bytes | Cost (%CPU)| Time     |-------------------------------------------------------------------------------|   0 | SELECT STATEMENT  |           |       |       |     3 (100)|          ||*  1 |  TABLE ACCESS FULL| ADDRESSES |     1 |    48 |     3   (0)| 00:00:01 |-------------------------------------------------------------------------------Predicate Information (identified by operation id):---------------------------------------------------   1 - filter((("T"."START_DATE" IS NULL OR              "T"."START_DATE"<=SYSDATE@!+3) AND ("T"."END_DATE" IS NULL OR              "T"."END_DATE">SYSDATE@!+3)))Note-----   - dynamic statistics used: dynamic sampling (level=2)24 rows selected.All in all a nice, easy way to query effective dated information as of a point in time without a complex where clause.  You need to maintain the data - it isn't that a delete will turn into an update the end dates a record or anything - but if you have tables with start/end dates, this will make it much easier to query them.

  Read the article

• How to debug memcached "SERVER HAS FAILED AND IS DISABLED UNTIL TIMED RETRY" errors?

  - by Jevgenij Evll

  I have a two server memcached setup. When memcached write fails, I receive an email notification. About once per day "SERVER HAS FAILED AND IS DISABLED UNTIL TIMED RETRY" error comes and I have no idea how to find the reason. I am using PHP Memcached client. I am not using too long keys. I tried adding -v flag, but it does not help, the log remains empty. If I include output of getStats to the error notification, I receive the following info: Array ( [192.168.0.3:11211] => Array ( [pid] => 28167 [uptime] => 3671962 [threads] => 4 [time] => 1358714713 [pointer_size] => 64 [rusage_user_seconds] => 24516 [rusage_user_microseconds] => 130981 [rusage_system_seconds] => 86246 [rusage_system_microseconds] => 675512 [curr_items] => 1616352 [total_items] => 118339822 [limit_maxbytes] => 2684354560 [curr_connections] => 8 [total_connections] => 78108681 [connection_structures] => 356 [bytes] => 981522779 [cmd_get] => 1561752945 [cmd_set] => 158718324 [get_hits] => 1383072575 [get_misses] => 178680370 [evictions] => 0 [bytes_read] => 138113231690 [bytes_written] => 1091741700765 [version] => 1.4.15 ) [192.168.0.4:11211] => Array ( [pid] => -1 [uptime] => 0 [threads] => 0 [time] => 0 [pointer_size] => 0 [rusage_user_seconds] => 0 [rusage_user_microseconds] => 0 [rusage_system_seconds] => 0 [rusage_system_microseconds] => 0 [curr_items] => 0 [total_items] => 0 [limit_maxbytes] => 0 [curr_connections] => 0 [total_connections] => 0 [connection_structures] => 0 [bytes] => 0 [cmd_get] => 0 [cmd_set] => 0 [get_hits] => 0 [get_misses] => 0 [evictions] => 0 [bytes_read] => 0 [bytes_written] => 0 [version] => ) )

  Read the article

• PHP bcompiler install

  - by dobs

  How to install bcompiler on Fedora, have this error: [root@server server]# pecl install channel://pecl.php.net/bcompiler-0.9.1 downloading bcompiler-0.9.1.tgz ... Starting to download bcompiler-0.9.1.tgz (47,335 bytes) .............done: 47,335 bytes 10 source files, building running: phpize Configuring for: PHP Api Version: 20090626 Zend Module Api No: 20090626 Zend Extension Api No: 220090626 building in /var/tmp/pear-build-server/bcompiler-0.9.1 running: /var/tmp/bcompiler/configure checking for grep that handles long lines and -e... /bin/grep checking for egrep... /bin/grep -E checking for a sed that does not truncate output... /bin/sed checking for cc... cc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes .... /var/tmp/bcompiler/bcompiler.c:2174: ?????????: expected ‘struct zend_arg_info *’ but argument is of type ‘const struct _zend_arg_info *’ /var/tmp/bcompiler/bcompiler.c: ? ??????? ‘apc_serialize_zend_class_entry’: /var/tmp/bcompiler/bcompiler.c:3100: ??????????????: ???????????? ???????? ????????????? ?????????? ???? /var/tmp/bcompiler/bcompiler.c:3107: ??????????????: ???????? ????????? 1 ‘apc_serialize_zend_function_entry’ ???????? ????????????? ?????????? ???? /var/tmp/bcompiler/bcompiler.c:2874: ?????????: expected ‘struct zend_function_entry *’ but argument is of type ‘const struct _zend_function_entry *’ /var/tmp/bcompiler/bcompiler.c: ? ??????? ‘apc_deserialize_zend_class_entry’: /var/tmp/bcompiler/bcompiler.c:3324: ??????????????: ???????? ????????? 1 ‘apc_deserialize_zend_function_entry’ ???????? ????????????? ?????????? ???? /var/tmp/bcompiler/bcompiler.c:2900: ?????????: expected ‘struct zend_function_entry *’ but argument is of type ‘const struct _zend_function_entry *’ make: *** [bcompiler.lo] ?????? 1 ERROR: 'make' failed yum install bzip2-libs bzip2-devel - Fix it...

  Read the article

• OpenSSL: certificate signature failure error

  - by e-t172

  I'm trying to wget La Banque Postale's website. $ wget https://www.labanquepostale.fr/ --2009-10-08 17:25:03-- https://www.labanquepostale.fr/ Resolving www.labanquepostale.fr... 81.252.54.6 Connecting to www.labanquepostale.fr|81.252.54.6|:443... connected. ERROR: cannot verify www.labanquepostale.fr's certificate, issued by `/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA': certificate signature failure To connect to www.labanquepostale.fr insecurely, use `--no-check-certificate'. Unable to establish SSL connection. I'm using Debian Sid. On another machine which is running Debian Sid with same software versions the command works perfectly. ca-certificates is installed on both machines (I tried removing it and reinstalling it in case a certificate got corrupted somehow, no luck). Opening https://www.labanquepostale.fr/ in Iceweasel on the same machine works perfectly. Additional information: $ openssl s_client -CApath /etc/ssl/certs -connect www.labanquepostale.fr:443 CONNECTED(00000003) depth=3 /C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority verify error:num=7:certificate signature failure verify return:0 --- Certificate chain 0 s:/1.3.6.1.4.1.311.60.2.1.3=FR/2.5.4.15=V1.0, Clause 5.(b)/serialNumber=421100645/C=FR/postalCode=75006/ST=PARIS/L=PARIS/streetAddress=115 RUE DE SEVRES/O=LA BANQUE POSTALE/OU=DISF2/CN=www.labanquepostale.fr i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA 1 s:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA i:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=(c) 2006 VeriSign, Inc. - For authorized use only/CN=VeriSign Class 3 Public Primary Certification Authority - G5 2 s:/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=(c) 2006 VeriSign, Inc. - For authorized use only/CN=VeriSign Class 3 Public Primary Certification Authority - G5 i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority 3 s:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority i:/C=US/O=VeriSign, Inc./OU=Class 3 Public Primary Certification Authority --- Server certificate -----BEGIN CERTIFICATE----- <base64-encoded certificate removed for lisibility> -----END CERTIFICATE----- subject=/1.3.6.1.4.1.311.60.2.1.3=FR/2.5.4.15=V1.0, Clause 5.(b)/serialNumber=421100645 /C=FR/postalCode=75006/ST=PARIS/L=PARIS/streetAddress=115 RUE DE SEVRES/O=LA BANQUE POSTALE/OU=DISF2/CN=www.labanquepostale.fr issuer=/C=US/O=VeriSign, Inc./OU=VeriSign Trust Network/OU=Terms of use at https://www.verisign.com/rpa (c)06/CN=VeriSign Class 3 Extended Validation SSL SGC CA --- No client certificate CA names sent --- SSL handshake has read 5101 bytes and written 300 bytes --- New, TLSv1/SSLv3, Cipher is RC4-MD5 Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : RC4-MD5 Session-ID: 0009008CB3ADA9A37CE45B464E989C82AD0793D7585858584ACE056700035363 Session-ID-ctx: Master-Key: 1FB7DAD98B6738BEA7A3B8791B9645334F9C760837D95E3403C108058A3A477683AE74D603152F6E4BFEB6ACA48BC2C3 Key-Arg : None Start Time: 1255015783 Timeout : 300 (sec) Verify return code: 7 (certificate signature failure) --- Any idea why I get certificate signature failure? As if this wasn't strange enough, copy-pasting the "server certificate" mentionned in the output and running openssl verify on it returns OK...

  Read the article

• Uwsgi starts from root but not as a service

  - by vittore

  I have nginx + uwsgi setup for flask website. thats my nginx server { listen 80; server_name _; location /static/ { alias /var/www/site/app/static/; } location / { uwsgi_pass 127.0.0.1:5080; include uwsgi_params; } } And here is my uwsgi config.xml <uwsgi> <socket>127.0.0.1:5080</socket> <autoload/> <daemonize>/var/log/uwsgi_webapp.log</daemonize> <pythonpath>/var/www/site/</pythonpath> <module>run:app</module> <plugins>python27</plugins> <virtualenv>/var/www/venv/</virtualenv> <processes>1</processes> <enable-threads/> <master /> <harakiri>60</harakiri> <max-requests>2000</max-requests> <limit-as>512</limit-as> <reload-on-as>256</reload-on-as> <reload-on-rss>192</reload-on-rss> <no-orphans/> <vacuum/> </uwsgi> When I trying to start uwsgi service (service uwsgi start) it says ok but there is no uwsgi process and I see the following in the log: *** Starting uWSGI 1.0.3-debian (64bit) on [Fri Oct 25 00:43:13 2013] *** compiled with version: 4.6.3 on 17 July 2012 02:26:54 current working directory: / writing pidfile to /run/uwsgi/app/gsk/pid detected binary path: /usr/bin/uwsgi-core setgid() to 33 setuid() to 33 limiting address space of processes... your process address space limit is 536870912 bytes (512 MB) your memory page size is 4096 bytes *** WARNING: you have enabled harakiri without post buffering. Slow upload could be rejected on post-unbuffered webservers *** uwsgi socket 0 bound to TCP address 127.0.0.1:5080 fd 6 bind(): Permission denied [socket.c line 107] However when I start uwsgi as a root uwsgi --socket 127.0.0.1:5080 --module run --callab app --harakiri 15 --harakiri-verbose --logto2 tmp/uwsgi.log It starts just fine and after restarting nginx I can access website. What can be an issue ?

  Read the article

• Globe SSL with NGINX SSL certificate problem, please help

  - by PartySoft

  I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

  Read the article

• dovecot imap ssl certificate issues

  - by mulllhausen

  i have been trying to configure my dovecot imap server (version 1.0.10 - upgrading is not an option at this stage) with a new ssl certificate on ubuntu like so: $ grep ^ssl /etc/dovecot/dovecot.conf ssl_disable = no ssl_cert_file = /etc/ssl/certs/mydomain.com.crt.20120904 ssl_key_file = /etc/ssl/private/mydomain.com.key.20120904 $ /etc/init.t/dovecot stop $ sudo dovecot -p $ [i enter the ssl password here] it doesn't show any errors and when i run ps aux | grep dovecot i get root 21368 0.0 0.0 12452 688 ? Ss 15:19 0:00 dovecot -p root 21369 0.0 0.0 71772 2940 ? S 15:19 0:00 dovecot-auth dovecot 21370 0.0 0.0 14140 1904 ? S 15:19 0:00 pop3-login dovecot 21371 0.0 0.0 14140 1900 ? S 15:19 0:00 pop3-login dovecot 21372 0.0 0.0 14140 1904 ? S 15:19 0:00 pop3-login dovecot 21381 0.0 0.0 14280 2140 ? S 15:19 0:00 imap-login dovecot 21497 0.0 0.0 14280 2116 ? S 15:29 0:00 imap-login dovecot 21791 0.0 0.0 14148 1908 ? S 15:48 0:00 imap-login dovecot 21835 0.0 0.0 14148 1908 ? S 15:53 0:00 imap-login dovecot 21931 0.0 0.0 14148 1904 ? S 16:00 0:00 imap-login me 21953 0.0 0.0 5168 944 pts/0 S+ 16:02 0:00 grep --color=auto dovecot which looks like it is all running fine. so then i test to see if i can telnet to the dovecot server, and this works fine: $ telnet localhost 143 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. * OK Dovecot ready. but when i test whether dovecot has configured the ssl certificates properly, it appears to fail: $ sudo openssl s_client -connect localhost:143 -starttls imap CONNECTED(00000003) depth=0 /description=xxxxxxxxxxxxxxxxx/C=AU/ST=xxxxxxxx/L=xxxx/O=xxxxxx/CN=*.mydomain.com/[email protected] verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /description=xxxxxxxxxxx/C=AU/ST=xxxxxx/L=xxxx/O=xxxx/CN=*.mydomain.com/[email protected] verify error:num=27:certificate not trusted verify return:1 depth=0 /description=xxxxxxxx/C=AU/ST=xxxxxxxxxx/L=xxxx/O=xxxxx/CN=*.mydomain.com/[email protected] verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/description=xxxxxxxxxxxx/C=AU/ST=xxxxxxxxxx/L=xxxxxxxx/O=xxxxxxx/CN=*.mydomain.com/[email protected] i:/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Class 2 Primary Intermediate Server CA --- Server certificate -----BEGIN CERTIFICATE----- xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxxxx . . . xxxxxxxxxxxxxxxxxxxx xxxxxxxxxxxxxxxxxx== -----END CERTIFICATE----- subject=/description=xxxxxxxxxx/C=AU/ST=xxxxxxxxx/L=xxxxxxx/O=xxxxxx/CN=*.mydomain.com/[email protected] issuer=/C=IL/O=StartCom Ltd./OU=Secure Digital Certificate Signing/CN=StartCom Class 2 Primary Intermediate Server CA --- No client certificate CA names sent --- SSL handshake has read 2831 bytes and written 342 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: xxxxxxxxxxxxxxxxxxxx Session-ID-ctx: Master-Key: xxxxxxxxxxxxxxxxxx Key-Arg : None Start Time: 1351661960 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) --- . OK Capability completed. at least, i'm assuming this is a failure???

  Read the article

• CYGWin and sshd. Accepts authentication, but won't connect

  - by timramich

  Everything I find relating to this is the "ssh-exchange-identification:" error. This doesn't happen for me. I get two lines: Connection to localhost closed by remote host. Connection to localhost closed. ssh -v localhost spits out: OpenSSH_5.8p1, OpenSSL 0.9.8r 8 Feb 2011 debug1: Reading configuration data /etc/ssh_config debug1: Connecting to localhost [::1] port 22. debug1: Connection established. debug1: identity file /home/tim/.ssh/id_rsa type -1 debug1: identity file /home/tim/.ssh/id_rsa-cert type -1 debug1: identity file /home/tim/.ssh/id_dsa type -1 debug1: identity file /home/tim/.ssh/id_dsa-cert type -1 debug1: identity file /home/tim/.ssh/id_ecdsa type -1 debug1: identity file /home/tim/.ssh/id_ecdsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.8 debug1: match: OpenSSH_5.8 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.8 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: sending SSH2_MSG_KEX_ECDH_INIT debug1: expecting SSH2_MSG_KEX_ECDH_REPLY debug1: Server host key: ECDSA 64:e3:27:90:ef:48:93:21:38:ea:9b:0e:0b:07:b0:2a debug1: Host 'localhost' is known and matches the ECDSA host key. debug1: Found key in /home/tim/.ssh/known_hosts:1 debug1: ssh_ecdsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: publickey debug1: Trying private key: /home/tim/.ssh/id_rsa debug1: Trying private key: /home/tim/.ssh/id_dsa debug1: Trying private key: /home/tim/.ssh/id_ecdsa debug1: Next authentication method: keyboard-interactive debug1: Authentications that can continue: publickey,password,keyboard-interactive debug1: Next authentication method: password tim@localhost's password: debug1: Authentication succeeded (password). Authenticated to localhost ([::1]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. debug1: channel 0: free: client-session, nchannels 1 Connection to localhost closed by remote host. Connection to localhost closed. Transferred: sent 2008, received 1376 bytes, in 0.0 seconds Bytes per second: sent 64774.0, received 44387.0 debug1: Exit status -1 I'm really at wit's end here because I couldn't get Windows' remote shell to even work. I'm so sick of using VNC just to get to a shell. Plus Windows' shell sucks because there is nothing like screen. Thanks

  Read the article

• socket connection failed, telnet OK

  - by cf16

  my problem is that I can't connect two comps through socket (windows xp and windows7) although the server created with socket is listening and I can telnet it. It receives then information and does what should be done, but if I run the corresponding socket client I get error 10061. Moreover I am behind firewall - these two comps are running within my LAN, the windows firewalls are turned off, comp1: 192.168.1.2 port 12345 comp1: 192.168.1.6 port 12345 router: 192.168.1.1 Maybe port forwarding could help? But most important for me is to answer why Sockets fail if telnet works fine. client: int main(){ // Initialize Winsock. WSADATA wsaData; int iResult = WSAStartup(MAKEWORD(2,2), &wsaData); if (iResult != NO_ERROR) printf("Client: Error at WSAStartup().\n"); else printf("Client: WSAStartup() is OK.\n"); // Create a socket. SOCKET m_socket; m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); if (m_socket == INVALID_SOCKET){ printf("Client: socket() - Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); return 7; }else printf("Client: socket() is OK.\n"); // Connect to a server. sockaddr_in clientService; clientService.sin_family = AF_INET; //clientService.sin_addr.s_addr = inet_addr("77.64.240.156"); clientService.sin_addr.s_addr = inet_addr("192.168.1.5"); //clientService.sin_addr.s_addr = inet_addr("87.207.222.5"); clientService.sin_port = htons(12345); if (connect(m_socket, (SOCKADDR*)&clientService, sizeof(clientService)) == SOCKET_ERROR){ printf("Client: connect() - Failed to connect.\n"); wprintf(L"connect function failed with error: %ld\n", WSAGetLastError()); iResult = closesocket(m_socket); if (iResult == SOCKET_ERROR) wprintf(L"closesocket function failed with error: %ld\n", WSAGetLastError()); WSACleanup(); return 6; } // Send and receive data int bytesSent; int bytesRecv = SOCKET_ERROR; // Be careful with the array bound, provide some checking mechanism char sendbuf[200] = "Client: Sending some test string to server..."; char recvbuf[200] = ""; bytesSent = send(m_socket, sendbuf, strlen(sendbuf), 0); printf("Client: send() - Bytes Sent: %ld\n", bytesSent); while(bytesRecv == SOCKET_ERROR){ bytesRecv = recv(m_socket, recvbuf, 32, 0); if (bytesRecv == 0 || bytesRecv == WSAECONNRESET){ printf("Client: Connection Closed.\n"); break; }else printf("Client: recv() is OK.\n"); if (bytesRecv < 0) return 0; else printf("Client: Bytes received - %ld.\n", bytesRecv); } system("pause"); return 0; } server: int main(){ WORD wVersionRequested; WSADATA wsaData={0}; int wsaerr; // Using MAKEWORD macro, Winsock version request 2.2 wVersionRequested = MAKEWORD(2, 2); wsaerr = WSAStartup(wVersionRequested, &wsaData); if (wsaerr != 0){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The Winsock dll not found!\n"); return 0; }else{ printf("Server: The Winsock dll found!\n"); printf("Server: The status: %s.\n", wsaData.szSystemStatus); } /* Confirm that the WinSock DLL supports 2.2.*/ /* Note that if the DLL supports versions greater */ /* than 2.2 in addition to 2.2, it will still return */ /* 2.2 in wVersion since that is the version we */ /* requested. */ if (LOBYTE(wsaData.wVersion) != 2 || HIBYTE(wsaData.wVersion) != 2 ){ /* Tell the user that we could not find a usable WinSock DLL.*/ printf("Server: The dll do not support the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); WSACleanup(); return 0; }else{ printf("Server: The dll supports the Winsock version %u.%u!\n", LOBYTE(wsaData.wVersion), HIBYTE(wsaData.wVersion)); printf("Server: The highest version this dll can support: %u.%u\n", LOBYTE(wsaData.wHighVersion), HIBYTE(wsaData.wHighVersion)); } //////////Create a socket//////////////////////// //Create a SOCKET object called m_socket. SOCKET m_socket; // Call the socket function and return its value to the m_socket variable. // For this application, use the Internet address family, streaming sockets, and the TCP/IP protocol. // using AF_INET family, TCP socket type and protocol of the AF_INET - IPv4 m_socket = socket(AF_INET, SOCK_STREAM, IPPROTO_TCP); // Check for errors to ensure that the socket is a valid socket. if (m_socket == INVALID_SOCKET){ printf("Server: Error at socket(): %ld\n", WSAGetLastError()); WSACleanup(); //return 0; }else{ printf("Server: socket() is OK!\n"); } ////////////////bind////////////////////////////// // Create a sockaddr_in object and set its values. sockaddr_in service; // AF_INET is the Internet address family. service.sin_family = AF_INET; // "127.0.0.1" is the local IP address to which the socket will be bound. service.sin_addr.s_addr = htons(INADDR_ANY);//inet_addr("127.0.0.1");//htons(INADDR_ANY); //inet_addr("192.168.1.2"); // 55555 is the port number to which the socket will be bound. // using the htons for big-endian service.sin_port = htons(12345); // Call the bind function, passing the created socket and the sockaddr_in structure as parameters. // Check for general errors. if (bind(m_socket, (SOCKADDR*)&service, sizeof(service)) == SOCKET_ERROR){ printf("Server: bind() failed: %ld.\n", WSAGetLastError()); closesocket(m_socket); //return 0; }else{ printf("Server: bind() is OK!\n"); } // Call the listen function, passing the created socket and the maximum number of allowed // connections to accept as parameters. Check for general errors. if (listen(m_socket, 1) == SOCKET_ERROR) printf("Server: listen(): Error listening on socket %ld.\n", WSAGetLastError()); else{ printf("Server: listen() is OK, I'm waiting for connections...\n"); } // Create a temporary SOCKET object called AcceptSocket for accepting connections. SOCKET AcceptSocket; // Create a continuous loop that checks for connections requests. If a connection // request occurs, call the accept function to handle the request. printf("Server: Waiting for a client to connect...\n"); printf("***Hint: Server is ready...run your client program...***\n"); // Do some verification... while (1){ AcceptSocket = SOCKET_ERROR; while (AcceptSocket == SOCKET_ERROR){ AcceptSocket = accept(m_socket, NULL, NULL); } // else, accept the connection... note: now it is wrong implementation !!!!!!!! !! !! (only 1 char) // When the client connection has been accepted, transfer control from the // temporary socket to the original socket and stop checking for new connections. printf("Server: Client Connected! Mammamija. \n"); m_socket = AcceptSocket; char recvBuf[200]=""; char * rc=recvBuf; int bytesRecv=recv(m_socket,recvBuf,64,0); if(bytesRecv==0 || bytesRecv==WSAECONNRESET){ cout<<"server: connection closed.\n"; }else{ cout<<"server: recv() is OK.\n"; if(bytesRecv<0){ return 0; }else{ printf("server: bytes received: %ld.\n",recvBuf); } }

  Read the article

• Windows Server traffic monitor that show traffic for each connected IP

  - by Mike Trader

  I would like to see traffic in bytes of individual users (IP's) in real time. Logging would be good too. Additionally I would like to see which process (CGI.exe, php script etc) they are connected to or minimally what the GET/POST request was. I have looked at many server monitoring tools but have not found something like this. Any suggestions would be appreciated.

  Read the article

• PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 + SuExec => Connection reset by peer: mod_fcgid: error reading data from FastCGI server

  - by Zigzag

  I'm trying to use PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 but I always have the error : "Connection reset by peer: mod_fcgid: error reading data from FastCGI server". And Apache returns an error 500 each time I tried to execute a php page : I have compiled the Apache with this options: ./configure --with-mpm=worker --enable-userdir=shared --enable-actions=shared --enable-alias=shared --enable-auth=shared --enable-so --enable-deflate \ --enable-cache=shared --enable-disk-cache=shared --enable-info=shared --enable-rewrite=shared \ --enable-suexec=shared --with-suexec-caller=www-data --with-suexec-userdir=site --with-suexec-logfile=/usr/local/apache2/logs/suexec.log --with-suexec-docroot=/home Then PHP: ./configure --with-config-file-path=/usr/local/apache2/php --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql --with-zlib --enable-exif --with-gd --enable-cgi Then FCdigd: APXS=/usr/local/apache2/bin/apxs ./configure.apxs The VHOST is: <Directory /home/website_panel/site/> FCGIWrapper /home/website_panel/cgi/php .php ... ErrorLog /home/website_panel/logs/error.log </Directory> cat /home/website_panel/logs/error.log [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:42 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:42 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:43 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:43 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php The Suexec log: root:/usr/local/apache2# cat /var/log/apache2/suexec.log [2010-03-07 22:11:05]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:15]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:23]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:42]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:43]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php root:/usr/local/apache2# cat logs/error_log [Sun Mar 07 22:18:47 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/local/apache2/bin/suexec) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Memory Allocated 0 bytes (each conf takes 32 bytes) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Version 0.7 - Initialized [0 Confs] [Sun Mar 07 22:18:47 2010] [notice] Apache/2.2.14 (Unix) mod_fcgid/2.3.5 configured -- resuming normal operations root:/usr/local/apache2# /home/website_panel/cgi/php -v PHP 5.3.2 (cli) (built: Mar 7 2010 16:01:49) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies If someone has got an idea, I want to hear it ^^ Thanks !

  Read the article

• VirtualBox guest responds to ping but all ports closed in nmap

  - by jeremyjjbrown

  I want to setup a test database on a vm for development purposes but I cannot connect to the server via the network. I've got Ubuntu 12.04vm installed on 12.04 host in Virtualbox 4.2.4 set to - Bridged network mode - Promiscuous Allow All When I try to ping the virtual guest from any network client I get the expected result. PING 192.168.1.209 (192.168.1.209) 56(84) bytes of data. 64 bytes from 192.168.1.209: icmp_req=1 ttl=64 time=0.427 ms ... Internet access inside the vm is normal But when I nmap it I get nothin! jeremy@bangkok:~$ nmap -sV -p 1-65535 192.168.1.209 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:39 CST Nmap scan report for jeremy (192.168.1.209) Host is up (0.0032s latency). All 65535 scanned ports on jeremy (192.168.1.209) are closed Service detection performed. Please report any incorrect results at http://nmap.org/submit/ Nmap done: 1 IP address (1 host up) scanned in 0.88 seconds ufw and iptables on VM... jeremy@jeremy:~$ sudo service ufw stop [sudo] password for jeremy: ufw stop/waiting jeremy@jeremy:~$ sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination I have scanned around and have no reason to believe that my router is blocking internal ports. jeremy@bangkok:~$ nmap -v 192.168.1.2 Starting Nmap 5.21 ( http://nmap.org ) at 2012-11-15 18:44 CST Initiating Ping Scan at 18:44 Scanning 192.168.1.2 [2 ports] Completed Ping Scan at 18:44, 0.00s elapsed (1 total hosts) Initiating Parallel DNS resolution of 1 host. at 18:44 Completed Parallel DNS resolution of 1 host. at 18:44, 0.03s elapsed Initiating Connect Scan at 18:44 Scanning 192.168.1.2 [1000 ports] Discovered open port 445/tcp on 192.168.1.2 Discovered open port 139/tcp on 192.168.1.2 Discovered open port 3306/tcp on 192.168.1.2 Discovered open port 80/tcp on 192.168.1.2 Discovered open port 111/tcp on 192.168.1.2 Discovered open port 53/tcp on 192.168.1.2 Discovered open port 5902/tcp on 192.168.1.2 Discovered open port 8090/tcp on 192.168.1.2 Discovered open port 6881/tcp on 192.168.1.2 Completed Connect Scan at 18:44, 0.02s elapsed (1000 total ports) Nmap scan report for 192.168.1.2 Host is up (0.0017s latency). Not shown: 991 closed ports PORT STATE SERVICE 53/tcp open domain 80/tcp open http 111/tcp open rpcbind 139/tcp open netbios-ssn 445/tcp open microsoft-ds 3306/tcp open mysql 5902/tcp open vnc-2 6881/tcp open bittorrent-tracker 8090/tcp open unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 0.08 seconds Answer... Turns out all of the ports were open to the network. I installed open ssh and confirmed it. Then I edited my db conf to listen to external IP's and all was well.

  Read the article

• APC (PHP Cache) Uptime 0 minutes, not caching

  - by Jussi

  My goal is to implement APC for opcode cache for a drupal 6 production site. I have so far tested APC with several php files with and without including other php files with include_once. Also tried to tweak the apc.ini values for shm_size, apc.include_once_override and apc.stat. Restarted apache every time. Resulting in apc.php not showing any changes in any values. (except of course the changed apc.ini values are shown as they should) Every time i refresh the apc.php test page, the start time resets as the current time showing uptime 0 minutes. apc.php -testpage shows: General Cache InformationAPC Version 3.1.9 PHP Version 5.2.10 APC Host xxxx.xx.xx Server Software Apache/2.2.3 (CentOS) Shared Memory 1 Segment(s) with 128.0 MBytes (mmap memory, pthread mutex Locks locking) Start Time 2011/07/26 11:53:56 Uptime 0 minutes File Upload Support 1 Cached Files 0 ( 0.0 Bytes) Hits 1 Misses 1 Request Rate (hits, misses) 2.00 cache requests/second Hit Rate 1.00 cache requests/second Miss Rate 1.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 Cached Variables 0 ( 0.0 Bytes) Hits 0 Misses 0 Request Rate (hits, misses) 0.00 cache requests/second Hit Rate 0.00 cache requests/second Miss Rate 0.00 cache requests/second Insert Rate 0.00 cache requests/second Cache full count 0 apc.cache_by_default 1 apc.canonicalize 1 apc.coredump_unmap 0 apc.enable_cli 0 apc.enabled 1 apc.file_md5 0 apc.file_update_protection 2 apc.filters apc.gc_ttl 3600 apc.include_once_override 0 apc.lazy_classes 0 apc.lazy_functions 0 apc.max_file_size 16 apc.mmap_file_mask /tmp/apcphp5.095eRm apc.num_files_hint 1024 apc.preload_path apc.report_autofilter 0 apc.rfc1867 0 apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 128M apc.slam_defense 0 apc.stat 0 apc.stat_ctime 0 apc.ttl 7200 apc.use_request_time 1 apc.user_entries_hint 4096 apc.user_ttl 7200 apc.write_lock 1 Host Status Diagrams: Free: 128.0 MBytes (100.0%) Hits: 1 (50.0%) Used: 20.3 KBytes (0.0%) Misses: 1 (50.0%) Detailed Memory Usage and Fragmentation: Fragmentation: 0% phpinfo shows: Server API CGI/FastCGI APC: Version 3.1.9 APC Debugging Enabled MMAP Support Enabled MMAP File Mask /tmp/apcphp5.JkKDk7 Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Jul 21 2011 14:31:12 I followed these steps to find if suexec settings would prevent caching: http://www.litespeedtech.com/support/forum/showthread.php?t=4189 [root@host /]# ps -ef|grep lsphp root 20402 17833 0 11:21 pts/0 00:00:00 grep lsphp [root@host /]# ps -waux root 17833 0.0 0.1 5004 1484 pts/0 S 10:39 0:00 bash ..indicates that there is no lsphp running on the host also I read the following article and comments, concluding that in my case the problem is not the suexec as the user apache is the httpd process owner http://www.brandonturner.net/blog/2009/07/fastcgi_with_php_opcode_cache/ also suexec command is not recognized when logged and launced as root @ host also i'm almost confident that there is no cPanel running on the host to check if a setting there would reset the running cache process at some interval This leaves me with few clues where to head next. I tried to set (with chown and chgrp) apache as the owner of the apc.php file and some test php files resulting in 500 server error. Is there a way to check if the file permissions prevent the apc stay running? I'm tremendously grateful for any suggestions or help.

  Read the article

• Can't detect wireless networks, running ubuntu 9.10 on eeepc 1000he

  - by David Brown

  Hi, I am running Ubuntu 9.10 on an ASUS eeepc 1000HE, and my wireless card, RaLink RT 2860, is failing to recognize any wireless networks. It was working fine this morning, until I accidentally hit Fn F2, disabling the wireless card. I hit Fn F2 again to reenable it, but it no longer will detect any wireless networks (and other computers in the household do recognize them). Any help at all will be greatly appreciated! I googled quite a bit and talked to a human about this but could not fix it. We tried dhclient ra0, which returned There is already a pid file /var/run/dhclient.pid with pid 2438 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.2 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ Listening on LPF/ra0/00:25:d3:13:f4:20 Sending on LPF/ra0/00:25:d3:13:f4:20 Sending on Socket/fallback DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 6 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 9 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 8 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on ra0 to 255.255.255.255 port 67 interval 6 No DHCPOFFERS received. No working leases in persistent database - sleeping. Other data: iwconfig returns (other stuff here...) ra0 RT2860 Wireless ESSID:"" Nickname:"RT2860STA" Mode:Auto Frequency=2.412 GHz Bit Rate=1 Mb/s RTS thr:off Fragment thr:off Link Quality=10/100 Signal level:0 dBm Noise level:-87 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ifconfig returns (other stuff here...) ra0 Link encap:Ethernet HWaddr 00:25:d3:13:f4:20 inet6 addr: fe80::225:d3ff:fe13:f420/64 Scope:Link UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:583 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 ra0:avahi Link encap:Ethernet HWaddr 00:25:d3:13:f4:20 inet addr:169.254.7.117 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST MULTICAST MTU:1500 Metric:1 Interrupt:19

  Read the article

• External USB attached drive works in Windows XP but not in Windows 7. How to fix?

  - by irrational John

  Earlier this week I purchased this "N52300 EZQuest Pro" external hard drive enclosure from here. I can connect the enclosure using USB 2.0 and access the files in both NTFS partitions on the MBR partitioned drive when I use either Windows XP (SP3) or Mac OS X 10.6. So it works as expected in XP & Snow Leopard. However, the enclosure does not work in Windows 7 (Home Premium) either 64-bit or 32-bit or in Ubuntu 10.04 (kernel 2.6.32-23-generic). I'm thinking this must be a Windows 7 driver problem because the enclosure works in XP & Snow Leopard. I do know that no special drivers are required to use this enclosure. It is supported using the USB mass storage drivers included with XP and OS X. It should also work fine using the mass storage support in Windows 7, no? FWIW, I have also tried using 32-bit Windows 7 on both my desktop, a Gigabyte GA-965P-DS3 with a Pentium Dual-Core E6500 @ 2.93GHz, and on my early 2008 MacBook. I see the same failure in both cases that I see with 64-bit Windows 7. So it doesn't appear to be specific to one hardware platform. I'm hoping someone out there can help me either get the enclosure to work in Windows 7 or convince me that the enclosure hardware is bad and should be RMAed. At the moment though an RMA seems pointless since this appears to be a (Windows 7) device driver problem. I have tried to track down any updates to the mass storage drivers included with Windows 7 but have so far come up empty. Heck, I can't even figure out how to place a bug report with Microsoft since apparently the grace period for Windows 7 email support is only a few months. I came across a link to some USB troubleshooting steps in another question. I haven't had a chance to look over the suggestions on that site or try them yet. Maybe tomorrow if I have time ... ;-) I'll finish up with some more details about the problem. When I connect the enclosure using USB to Windows 7 at first it appears everything worked. Windows detects the drive and installs a driver for it. Looking in Device Manager there is an entry under the Hard Drives section with the title, Hitachi HDT721010SLA360 USB Device. When you open Windows Disk Management the first time after the enclosure has been attached the drive appears as "Not initialize" and I'm prompted to initialize it. This is bogus. After all, the drive worked fine in XP so I know it has already been initialized, partitioned, and formatted. So of course I never try to initialize it "again". (It's a 1 GB drive and I don't want to lose the data on it). Except for this first time, the drive never shows up in Disk Management again unless I uninstall the Hitachi HDT721010SLA360 USB Device entry under Hard Drives, unplug, and then replug the enclosure. If I do that then the process in the previous paragraph repeats. In Ubuntu the enclosure never shows up at all at the file system level. Below are an excerpt from kern.log and an excerpt from the result of lsusb -v after attaching the enclosure. It appears that Ubuntu at first recongnizes the enclosure and is attempting to attach it, but encounters errors which prevent it from doing so. Unfortunately, I don't know whether any of this info is useful or not. excerpt from kern.log [ 2684.240015] usb 1-2: new high speed USB device using ehci_hcd and address 22 [ 2684.393618] usb 1-2: configuration #1 chosen from 1 choice [ 2684.395399] scsi17 : SCSI emulation for USB Mass Storage devices [ 2684.395570] usb-storage: device found at 22 [ 2684.395572] usb-storage: waiting for device to settle before scanning [ 2689.390412] usb-storage: device scan complete [ 2689.390894] scsi 17:0:0:0: Direct-Access Hitachi HDT721010SLA360 ST6O PQ: 0 ANSI: 4 [ 2689.392237] sd 17:0:0:0: Attached scsi generic sg7 type 0 [ 2689.395269] sd 17:0:0:0: [sde] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB) [ 2689.395632] sd 17:0:0:0: [sde] Write Protect is off [ 2689.395636] sd 17:0:0:0: [sde] Mode Sense: 11 00 00 00 [ 2689.395639] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412003] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.412009] sde: sde1 sde2 [ 2689.455759] sd 17:0:0:0: [sde] Assuming drive cache: write through [ 2689.455765] sd 17:0:0:0: [sde] Attached SCSI disk [ 2692.620017] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2707.740014] usb 1-2: device descriptor read/64, error -110 [ 2722.970103] usb 1-2: device descriptor read/64, error -110 [ 2723.200027] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2738.320019] usb 1-2: device descriptor read/64, error -110 [ 2753.550024] usb 1-2: device descriptor read/64, error -110 [ 2753.780020] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2758.810147] usb 1-2: device descriptor read/8, error -110 [ 2763.940142] usb 1-2: device descriptor read/8, error -110 [ 2764.170014] usb 1-2: reset high speed USB device using ehci_hcd and address 22 [ 2769.200141] usb 1-2: device descriptor read/8, error -110 [ 2774.330137] usb 1-2: device descriptor read/8, error -110 [ 2774.440069] usb 1-2: USB disconnect, address 22 [ 2774.440503] sd 17:0:0:0: Device offlined - not ready after error recovery [ 2774.590023] usb 1-2: new high speed USB device using ehci_hcd and address 23 [ 2789.710020] usb 1-2: device descriptor read/64, error -110 [ 2804.940020] usb 1-2: device descriptor read/64, error -110 [ 2805.170026] usb 1-2: new high speed USB device using ehci_hcd and address 24 [ 2820.290019] usb 1-2: device descriptor read/64, error -110 [ 2835.520027] usb 1-2: device descriptor read/64, error -110 [ 2835.750018] usb 1-2: new high speed USB device using ehci_hcd and address 25 [ 2840.780085] usb 1-2: device descriptor read/8, error -110 [ 2845.910079] usb 1-2: device descriptor read/8, error -110 [ 2846.140023] usb 1-2: new high speed USB device using ehci_hcd and address 26 [ 2851.170112] usb 1-2: device descriptor read/8, error -110 [ 2856.300077] usb 1-2: device descriptor read/8, error -110 [ 2856.410027] hub 1-0:1.0: unable to enumerate USB device on port 2 [ 2856.730033] usb 3-2: new full speed USB device using uhci_hcd and address 11 [ 2871.850017] usb 3-2: device descriptor read/64, error -110 [ 2887.080014] usb 3-2: device descriptor read/64, error -110 [ 2887.310011] usb 3-2: new full speed USB device using uhci_hcd and address 12 [ 2902.430021] usb 3-2: device descriptor read/64, error -110 [ 2917.660013] usb 3-2: device descriptor read/64, error -110 [ 2917.890016] usb 3-2: new full speed USB device using uhci_hcd and address 13 [ 2922.911623] usb 3-2: device descriptor read/8, error -110 [ 2928.051753] usb 3-2: device descriptor read/8, error -110 [ 2928.280013] usb 3-2: new full speed USB device using uhci_hcd and address 14 [ 2933.301876] usb 3-2: device descriptor read/8, error -110 [ 2938.431993] usb 3-2: device descriptor read/8, error -110 [ 2938.540073] hub 3-0:1.0: unable to enumerate USB device on port 2 excerpt from lsusb -v Bus 001 Device 017: ID 0dc4:0000 Macpower Peripherals, Ltd Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 idVendor 0x0dc4 Macpower Peripherals, Ltd idProduct 0x0000 bcdDevice 0.01 iManufacturer 1 EZ QUEST iProduct 2 USB Mass Storage iSerial 3 220417 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 5 Config0 bmAttributes 0xc0 Self Powered MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 Interface0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x01 EP 1 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0200 1x 512 bytes bInterval 0 Device Qualifier (for other device speed): bLength 10 bDescriptorType 6 bcdUSB 2.00 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 64 bNumConfigurations 1 Device Status: 0x0001 Self Powered Update: Results using Firewire to connect. Today I recieved a 1394b 9 pin to 1394a 6 pin cable which allowed me to connect the "EZQuest Pro" via Firewire. Everything works. When I use Firewire I can connect whether I'm using Windows 7 or Ubuntu 10.04. I even tried booting my Gigabyte desktop as an OS X 10.6.3 Hackintosh and it worked there as well. (Though if I recall correctly, it also worked when using USB 2.0 and booting OS X on the desktop. Certainly it works with USB 2.0 and my MacBook.) I believe the firmware on the device is at the latest level available, v1.07. I base this on the excerpt below from the OS X System Profiler which shows Firmware Revision: 0x107. Bottom line: It's nice that the enclosure is actually usable when I connect with Firewire. But I am still searching for an answer as to why it does not work correctly when using USB 2.0 in Windows 7 (and Ubuntu ... but really Windows 7 is my biggest concern). OXFORD IDE Device 1: Manufacturer: EZ QUEST Model: 0x0 GUID: 0x1D202E0220417 Maximum Speed: Up to 800 Mb/sec Connection Speed: Up to 400 Mb/sec Sub-units: OXFORD IDE Device 1 Unit: Unit Software Version: 0x10483 Unit Spec ID: 0x609E Firmware Revision: 0x107 Product Revision Level: ST6O Sub-units: OXFORD IDE Device 1 SBP-LUN: Capacity: 1 TB (1,000,204,886,016 bytes) Removable Media: Yes BSD Name: disk3 Partition Map Type: MBR (Master Boot Record) S.M.A.R.T. status: Not Supported

  Read the article

• Can't manage iPod from linux anymore

  - by kemp

  I used to be able to see and manage my iPod with different softwares: Amarok, Rhythmbox, GTKPod. The device is a nano 1st generation 4gb. Currently it mounts regularly and can be accessed from the file system, but I get this in dmesg: [ 1547.617891] scsi 11:0:0:0: Direct-Access Apple iPod 1.62 PQ: 0 ANSI: 0 [ 1547.619103] sd 11:0:0:0: Attached scsi generic sg2 type 0 [ 1547.620478] sd 11:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 [ 1547.620494] sd 11:0:0:0: [sdb] 7999487 512-byte hardware sectors: (4.09 GB/3.81 GiB) [ 1547.621718] sd 11:0:0:0: [sdb] Write Protect is off [ 1547.621726] sd 11:0:0:0: [sdb] Mode Sense: 68 00 00 08 [ 1547.621732] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 1547.623591] sd 11:0:0:0: [sdb] Adjusting the sector count from its reported value: 7999488 [ 1547.624993] sd 11:0:0:0: [sdb] Assuming drive cache: write through [ 1547.625003] sdb: sdb1 sdb2 [ 1547.629686] sd 11:0:0:0: [sdb] Attached SCSI removable disk [ 1548.084026] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.369502] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.504358] FAT: invalid media value (0x2f) [ 1548.504363] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 1548.945173] FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive! [ 1548.945179] FAT: invalid media value (0x2f) [ 1548.945182] VFS: Can't find a valid FAT filesystem on dev sdb1. [ 1610.092886] usb 2-6: USB disconnect, address 9 The only application that can access it (partially) is Rhythmbox. I say partially because I can transfer files to the iPod but can't remove or modify them. Also one transfer didn't finish and only 9 out of 16 songs were delivered to the device. All other softwares I tried (GTKPod, Amarok, Songbird) don't even detect it. What can I do to troubleshoot this? EDIT: # fdisk -l /dev/sdb Disk /dev/sdb: 4095 MB, 4095737344 bytes 241 heads, 62 sectors/track, 535 cylinders Units = cylinders of 14942 * 512 = 7650304 bytes Disk identifier: 0x20202020 Device Boot Start End Blocks Id System /dev/sdb1 1 11 80293+ 0 Empty Partition 1 has different physical/logical beginnings (non-Linux?): phys=(0, 1, 1) logical=(0, 1, 2) Partition 1 has different physical/logical endings: phys=(9, 254, 63) logical=(10, 181, 8) Partition 1 does not end on cylinder boundary. /dev/sdb2 11 536 3919415+ b W95 FAT32 Partition 2 has different physical/logical beginnings (non-Linux?): phys=(10, 0, 7) logical=(10, 181, 15) Partition 2 has different physical/logical endings: phys=(497, 240, 62) logical=(535, 88, 61) EDIT2: The "before" state is hard to tell, it was a lot of updates ago. Haven't been using my iPod for a while so I can't say when exactly it stopped working. I'm sure Amarok was still at version 1.X but can't remember when it was. My current system is debian testing fully updated. NOTE: just noticed that if I mount the device manually instead of letting nautilus automount it, I can see it again on GTKPod but still not on Banshee AND it's vanished from Rhythmbox...

  Read the article

• Forwarding udp ports iptables packets "lost"?

  - by Dindihi

  I have a Linux router (Debian 6.x) where i forward some ports to internal services. Some tcp ports (like 80, 22...) are OK. I have one Application listening on port 54277udp. No return is coming from this app, i only get Data on this port. Router: cat /proc/sys/net/ipv4/conf/all/rp_filter = 1 cat /proc/sys/net/ipv4/conf/eth0/forwarding = 1 cat /proc/sys/net/ipv4/conf/ppp0/forwarding = 1 $IPTABLES -t nat -I PREROUTING -p udp -i ppp0 --dport 54277 -j DNAT --to-destination $SRV_IP:54277 $IPTABLES -I FORWARD -p udp -d $SRV_IP --dport 54277 -j ACCEPT Also MASQUERADING internal traffic to ppp0(internet) is active & working. Default Policy INPUT&OUTPUT&FORWARD is DROP What is strange, when i do: tcpdump -p -vvvv -i ppp0 port 54277 I get a lot of traffic: 18:35:43.646133 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.652301 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.653324 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.655795 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.656727 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 18:35:43.659719 IP (tos 0x0, ttl 57, id 0, offset 0, flags [DF], proto UDP (17), length 57) source.ip > own.external.ip..54277: [udp sum ok] UDP, length 29 tcpdump -p -i eth0 port 54277 (on the same machine, the router) i get much less traffic. also on the destination $SRV_IP there are only a few packets coming in, but not all. INTERNAL SERVER: 19:15:30.039663 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.276112 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 19:15:30.726048 IP source.ip.52394 > 192.168.215.4.54277: UDP, length 16 So some udp ports are "ignored/dropped" ? Any idea what could be wrong? Edit: This is strange: The Forward rule has data packets, but the PREROUTING rule has 0 packets... iptables -nvL -t filter |grep 54277 Chain FORWARD (policy DROP 0 packets, 0 bytes) 168 8401 ACCEPT udp -- * * 0.0.0.0/0 192.168.215.4 state NEW,RELATED,ESTABLISHED udp dpt:54277 iptables -nvL -t nat |grep 54277 Chain PREROUTING (policy ACCEPT 405 packets, 24360 bytes) 0 0 DNAT udp -- ppp0 * 0.0.0.0/0 my.external.ip udp dpt:54277 state NEW,RELATED,ESTABLISHED to:192.168.215.4

  Read the article

• rsync to EC2 using ssh -i

  - by isomorphismes

  I'm able to ssh -i mykey.pem to EC2. I'm able to scp -i mykey.pem to EC2. But when I try to rsync -avz -e "ssh -i mykey.pem" I get this error: Warning: Identity file mykey.pem not accessible: No such file or directory. Permission denied (publickey). rsync: connection unexpectedly closed (0 bytes received so far) [sender] rsync error: unexplained error (code 255) at io.c(605) [sender=3.0.9] Any suggestions what I've done wrong?

  Read the article

• radvd is not assigning prefix

  - by Samik

  I'm currently trying to setup IPv6 address auto-configuration with router advertisement daemon (radvd) on a virtual machine running CentOS 6.5. But the eth0 interface is not obtaining that prefix. I've obtained the ULA prefix from here. Contents of /etc/sysctl.conf # Kernel sysctl configuration file for Red Hat Linux # # For binary values, 0 is disabled, 1 is enabled. See sysctl(8) and # sysctl.conf(5) for more details. # Controls IP packet forwarding net.ipv4.ip_forward = 0 net.ipv6.conf.all.forwarding = 1 # Controls source route verification net.ipv4.conf.default.rp_filter = 1 # Do not accept source routing net.ipv4.conf.default.accept_source_route = 0 # Controls the System Request debugging functionality of the kernel kernel.sysrq = 0 # Controls whether core dumps will append the PID to the core filename. # Useful for debugging multi-threaded applications. kernel.core_uses_pid = 1 # Controls the use of TCP syncookies net.ipv4.tcp_syncookies = 1 # Disable netfilter on bridges. net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-call-arptables = 0 # Controls the default maxmimum size of a mesage queue kernel.msgmnb = 65536 # Controls the maximum size of a message, in bytes kernel.msgmax = 65536 # Controls the maximum shared segment size, in bytes kernel.shmmax = 68719476736 # Controls the maximum number of shared memory segments, in pages kernel.shmall = 4294967296 Contents of /etc/radvd.conf # NOTE: there is no such thing as a working "by-default" configuration file. # At least the prefix needs to be specified. Please consult the radvd.conf(5) # man page and/or /usr/share/doc/radvd-*/radvd.conf.example for help. # # interface eth0 { AdvSendAdvert on; MinRtrAdvInterval 3; MaxRtrAdvInterval 10; AdvDefaultPreference low; AdvHomeAgentFlag off; prefix fd8a:8d9d:808f:1::/64 { AdvOnLink on; AdvAutonomous on; AdvRouterAddr on; }; }; Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes I've also enabled radvd at startup through chkconfig. Though I noticed that radvd is starting after interfaces are brought up. I've tried restarting the network service afterwards but still I get the following link-local address only #ip -6 addr show 1: lo: mtu 16436 inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: mtu 1500 qlen 1000 inet6 fe80::5054:ff:fe74:d746/64 scope link valid_lft forever preferred_lft forever Edit: Based on the answer given by Sander Steffann I still need clarification on some points but I'm posting here what worked. Contents of /etc/sysconfig/network NETWORKING=yes HOSTNAME=syslog-ng-server NETWORKING_IPV6=yes IPV6FORWARDING=yes Contents of /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=52:54:00:74:d7:46 TYPE=Ethernet UUID=af5db1cb-e809-4098-be1a-5a74dbb767b1 ONBOOT=yes NM_CONTROLLED=no BOOTPROTO=dhcp IPV6INIT=yes IPV6_AUTOCONF=yes IPV6FORWARDING=no Removed following line from /etc/sysctl.conf net.ipv6.conf.all.forwarding = 1 Contents of /etc/radvd.conf is as previous.

  Read the article

• gunicorn + django + nginx unix://socket failed (11: Resource temporarily unavailable)

  - by user1068118

  Running very high volume traffic on these servers configured with django, gunicorn, supervisor and nginx. But a lot of times I tend to see 502 errors. So I checked the nginx logs to see what error and this is what is recorded: [error] 2388#0: *208027 connect() to unix:/tmp/gunicorn-ourapp.socket failed (11: Resource temporarily unavailable) while connecting to upstream Can anyone help debug what might be causing this to happen? This is our nginx configuration: sendfile on; tcp_nopush on; tcp_nodelay off; listen 80 default_server; server_name imp.ourapp.com; access_log /mnt/ebs/nginx-log/ourapp-access.log; error_log /mnt/ebs/nginx-log/ourapp-error.log; charset utf-8; keepalive_timeout 60; client_max_body_size 8m; gzip_types text/plain text/xml text/css application/javascript application/x-javascript application/json; location / { proxy_pass http://unix:/tmp/gunicorn-ourapp.socket; proxy_pass_request_headers on; proxy_read_timeout 600s; proxy_connect_timeout 600s; proxy_redirect http://localhost/ http://imp.ourapp.com/; #proxy_set_header Host $host; #proxy_set_header X-Real-IP $remote_addr; #proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; #proxy_set_header X-Forwarded-Proto $my_scheme; #proxy_set_header X-Forwarded-Ssl $my_ssl; } We have configure Django to run in Gunicorn as a generic WSGI application. Supervisord is used to launch the gunicorn workers: home/user/virtenv/bin/python2.7 /home/user/virtenv/bin/gunicorn --config /home/user/shared/etc/gunicorn.conf.py daggr.wsgi:application This is what the gunicorn.conf.py looks like: import multiprocessing bind = 'unix:/tmp/gunicorn-ourapp.socket' workers = multiprocessing.cpu_count() * 3 + 1 timeout = 600 graceful_timeout = 40 Does anyone know where I can start digging to see what might be causing the problem? This is what my ulimit -a output looks like on the server: core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 59481 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 50000 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 1024 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

  Read the article

• Django + gunicorn + virtualenv + Supervisord issue

  - by Florian Le Goff

  Dear all, I have a strange issue with my virtualenv + gunicorn setup, only when gunicorn is launched via supervisord. I do realize that it may very well be an issue with my supervisord and I would appreciate any feedback on a better place to ask for help... In a nutshell : when I run gunicorn from my user shell, inside my virtualenv, everything is working flawlessly. I'm able to access all the views of my Django project. When gunicorn is launched by supervisord at the system startup, everything is OK. But, if I have to kill the gunicorn_django processes, or if I perform a supervisord restart, once that gunicorn_django has relaunched, every request is answered with a weird Traceback : (...) File "/home/hc/prod/venv/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/db/__init__.py", line 77, in connection = connections[DEFAULT_DB_ALIAS] File "/home/hc/prod/venv/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/db/utils.py", line 92, in __getitem__ backend = load_backend(db['ENGINE']) File "/home/hc/prod/venv/lib/python2.6/site-packages/Django-1.2.5-py2.6.egg/django/db/utils.py", line 50, in load_backend raise ImproperlyConfigured(error_msg) TemplateSyntaxError: Caught ImproperlyConfigured while rendering: 'django.db.backends.postgresql_psycopg2' isn't an available database backend. Try using django.db.backends.XXX, where XXX is one of: 'dummy', 'mysql', 'oracle', 'postgresql', 'postgresql_psycopg2', 'sqlite3' Error was: cannot import name utils Full stack available here : http://pastebin.com/BJ5tNQ2N I'm running... Ubuntu/maverick (up-to-date) Python = 2.6.6 virtualenv = 1.5.1 gunicorn = 0.12.0 Django = 1.2.5 psycopg2 = '2.4-beta2 (dt dec pq3 ext)' gunicorn configuration : backlog = 2048 bind = "127.0.0.1:8000" pidfile = "/tmp/gunicorn-hc.pid" daemon = True debug = True workers = 3 logfile = "/home/hc/prod/log/gunicorn.log" loglevel = "info" supervisord configuration : [program:gunicorn] directory=/home/hc/prod/hc command=/home/hc/prod/venv/bin/gunicorn_django -c /home/hc/prod/hc/gunicorn.conf.py user=hc umask=022 autostart=True autorestart=True redirect_stderr=True Any advice ? I've been stuck on this one for quite a while. It seems like some weird memory limit, as I'm not enforcing anything special : $ ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 20 file size (blocks, -f) unlimited pending signals (-i) 16382 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) unlimited virtual memory (kbytes, -v) unlimited file locks (-x) unlimited Thank you.

  Read the article

• Globe SSL with NGINX SSL certificate problem, please help

  - by PartySoft

  Hello, I have a big problem with installing a certificat for nginx (same happends with apache though) I have 3 files __domain_com.crt __domain_com.ca-bundle and ssl.key. I tried to append cat __domain_com.crt __leechpack_com.ca-bundle bundle.crt but if I do it like this i get an error: [emerg]: SSL_CTX_use_certificate_chain_file("/etc/nginx/__leechpack_com.crt") failed (SSL: error:0906D066:PEM routines:PEM_read_bio:bad end line error:140DC009:SSL routines:SSL_CTX_use_certificate_chain_file:PEM lib) And that's because the delimiters of the certificates arren't separated. ZqTjb+WBJQ== -----END CERTIFICATE----------BEGIN CERTIFICATE----- MIIE6DCCA9CgAwIBAgIQdIYhlpUQySkmKUvMi/gpLDANBgkqhkiG9w0BAQUFADBv If i separate them with an enter between certificated it will at least start but i will get the same warning from Firefox: This Connection is Untrusted You have asked Firefox to connect securely to domain.com, but we can't confirm that your connection is secure. The concatenate solution it is given by Globe SSL and the NGINX site but it doesn't work. I think the bundle is ignored though. http://customer.globessl.com/knowledgebase/55/Certificate-Installation--Nginx.html http://nginx.org/en/docs/http/configuring_https_servers.html#chains%20http://wiki.nginx.org/NginxHttpSslModule if i do openssl s_client -connect down.leechpack.com:443 CONNECTED(00000003) depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=20:unable to get local issuer certificate verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=27:certificate not trusted verify return:1 depth=0 /OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com verify error:num=21:unable to verify the first certificate verify return:1 --- Certificate chain 0 s:/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com i:/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA 1 s:/C=US/O=Globe Hosting, Inc./OU=GlobeSSL DV Certification Authority/CN=GlobeSSL CA i:/C=SE/O=AddTrust AB/OU=AddTrust External TTP Network/CN=AddTrust External CA Root --- Server certificate -----BEGIN CERTIFICATE----- MIIFQzCCBCugAwIBAgIQRnpCmtwX7z7GTla0QktE6DANBgkqhkiG9w0BAQUFADBl MQswCQYDVQQGEwJSTzEuMCwGA1UEChMlR0xPQkUgSE9TVElORyBDRVJUSUZJQ0FU SU9OIEFVVEhPUklUWTEmMCQGA1UEAxMdR0xPQkUgU1NMIERvbWFpbiBWYWxpZGF0 ZWQgQ0EwHhcNMTAwMjExMDAwMDAwWhcNMTEwMjExMjM1OTU5WjCBjTEhMB8GA1UE CxMYRG9tYWluIENvbnRyb2wgVmFsaWRhdGVkMSgwJgYDVQQLEx9Qcm92aWRlZCBi eSBHbG9iZSBIb3N0aW5nLCBJbmMuMSQwIgYDVQQLExtHbG9iZSBTdGFuZGFyZCBX aWxkY2FyZCBTU0wxGDAWBgNVBAMUDyoubGVlY2hwYWNrLmNvbTCCASIwDQYJKoZI hvcNAQEBBQADggEPADCCAQoCggEBAKX7jECMlYEtcvqVWQVUpXNxO/VaHELghqy/ Ml8dOfOXG29ZMZsKUMqS0jXEwd+Bdpm31lBxOALkj8o79hX0tspLMjgtCnreaker 49y62BcjfguXRFAaiseXTNbMer5lDWiHlf1E7uCoTTiczGqBNfl6qSJlpe4rYBtq XxBAiygaNba6Owghuh19+Uj8EICb2pxbJNFfNzU1D9InFdZSVqKHYBem4Cdrtxua W4+YONsfLnnfkRQ6LOLeYExHziTQhSavSv9XaCl9Zqzm5/eWbQqLGRpSJoEPY/0T GqnmeMIq5M35SWZgOVV10j3pOCS8o0zpp7hMJd2R/HwVaPCLjukCAwEAAaOCAcQw ggHAMB8GA1UdIwQYMBaAFB9UlnKtPUDnlln3STFTCWb5DWtyMB0GA1UdDgQWBBT0 8rPIMr7JDa2Xs5he5VXAvMWArjAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIw ADAdBgNVHSUEFjAUBggrBgEFBQcDAQYIKwYBBQUHAwIwVQYDVR0gBE4wTDBKBgsr BgEEAbIxAQICGzA7MDkGCCsGAQUFBwIBFi1odHRwOi8vd3d3Lmdsb2Jlc3NsLmNv bS9kb2NzL0dsb2JlU1NMX0NQUy5wZGYwRgYDVR0fBD8wPTA7oDmgN4Y1aHR0cDov L2NybC5nbG9iZXNzbC5jb20vR0xPQkVTU0xEb21haW5WYWxpZGF0ZWRDQS5jcmww dwYIKwYBBQUHAQEEazBpMEEGCCsGAQUFBzAChjVodHRwOi8vY3J0Lmdsb2Jlc3Ns LmNvbS9HTE9CRVNTTERvbWFpblZhbGlkYXRlZENBLmNydDAkBggrBgEFBQcwAYYY aHR0cDovL29jc3AuZ2xvYmVzc2wuY29tMCkGA1UdEQQiMCCCDyoubGVlY2hwYWNr LmNvbYINbGVlY2hwYWNrLmNvbTANBgkqhkiG9w0BAQUFAAOCAQEAB2Y7vQsq065K s+/n6nJ8ZjOKbRSPEiSuFO+P7ovlfq9OLaWRHUtJX0sLntnWY1T9hVPvS5xz/Ffl w9B8g/EVvvfMyOw/5vIyvHq722fAAC1lWU1rV3ww0ng5bgvD20AgOlIaYBvRq8EI 5Dxo2og2T1UjDN44GOSWsw5jetvVQ+SPeNPQLWZJS9pNCzFQ/3QDWNPOvHqEeRcz WkOTCqbOSZYvoSPvZ3APh+1W6nqiyoku/FCv9otSCtXPKtyVa23hBQ+iuxqIM4/R gncnUKASi6KQrWMQiAI5UDCtq1c09uzjw+JaEzAznxEgqftTOmXAJSQGqZGd6HpD ZqTjb+WBJQ== -----END CERTIFICATE----- subject=/OU=Domain Control Validated/OU=Provided by Globe Hosting, Inc./OU=Globe Standard Wildcard SSL/CN=*.domain.com issuer=/C=RO/O=GLOBE HOSTING CERTIFICATION AUTHORITY/CN=GLOBE SSL Domain Validated CA --- No client certificate CA names sent --- SSL handshake has read 3313 bytes and written 343 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 2048 bit Secure Renegotiation IS supported Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 5F9C8DC277A372E28A4684BAE5B311533AD30E251369D144A13DECA3078E067F Session-ID-ctx: Master-Key: 9B531A75347E6E7D19D95365C1208F2ED37E4004AA8F71FC614A18937BEE2ED9F82D58925E0B3931492AD3D2AA6EFD3B Key-Arg : None Start Time: 1288618211 Timeout : 300 (sec) Verify return code: 21 (unable to verify the first certificate) ---

  Read the article

• PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 + SuExec => Connection reset by peer: mod_fcgid: error readi

  - by Zigzag

  Hi, I'm trying to use PHP 5.3.2 + Fcgid 2.3.5 + Apache 2.2.14 but I always have the error : "Connection reset by peer: mod_fcgid: error reading data from FastCGI server". And Apache returns an error 500 each time I tried to execute a php page : I have compiled the Apache with this options: ./configure --with-mpm=worker --enable-userdir=shared --enable-actions=shared --enable-alias=shared --enable-auth=shared --enable-so --enable-deflate \ --enable-cache=shared --enable-disk-cache=shared --enable-info=shared --enable-rewrite=shared \ --enable-suexec=shared --with-suexec-caller=www-data --with-suexec-userdir=site --with-suexec-logfile=/usr/local/apache2/logs/suexec.log --with-suexec-docroot=/home Then PHP: ./configure --with-config-file-path=/usr/local/apache2/php --with-apxs2=/usr/local/apache2/bin/apxs --with-mysql --with-zlib --enable-exif --with-gd --enable-cgi Then FCdigd: APXS=/usr/local/apache2/bin/apxs ./configure.apxs The VHOST is: <Directory /home/website_panel/site/> FCGIWrapper /home/website_panel/cgi/php .php ... ErrorLog /home/website_panel/logs/error.log </Directory> cat /home/website_panel/logs/error.log [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:41 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:41 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:42 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:42 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php [Sun Mar 07 22:19:43 2010] [warn] [client xx.xx.xx.xx] (104)Connection reset by peer: mod_fcgid: error reading data from FastCGI server [Sun Mar 07 22:19:43 2010] [error] [client xx.xx.xx.xx] Premature end of script headers: test.php The Suexec log: root:/usr/local/apache2# cat /var/log/apache2/suexec.log [2010-03-07 22:11:05]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:15]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:11:23]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:41]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:42]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php [2010-03-07 22:19:43]: uid: (1001/website_panel) gid: (1001/website_panel) cmd: php root:/usr/local/apache2# cat logs/error_log [Sun Mar 07 22:18:47 2010] [notice] suEXEC mechanism enabled (wrapper: /usr/local/apache2/bin/suexec) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Memory Allocated 0 bytes (each conf takes 32 bytes) [Sun Mar 07 22:18:47 2010] [notice] mod_bw : Version 0.7 - Initialized [0 Confs] [Sun Mar 07 22:18:47 2010] [notice] Apache/2.2.14 (Unix) mod_fcgid/2.3.5 configured -- resuming normal operations root:/usr/local/apache2# /home/website_panel/cgi/php -v PHP 5.3.2 (cli) (built: Mar 7 2010 16:01:49) Copyright (c) 1997-2010 The PHP Group Zend Engine v2.3.0, Copyright (c) 1998-2010 Zend Technologies If someone has got an idea, I want to hear it ^^ Thanks !

  Read the article

• Certain SFTP user cannot connect

  - by trobrock

  I have my Ubuntu Server set up so users with the group of sftponly can connect with sftp, but have a shell of /bin/false, and they connect to their home directories. This is working fine with three of the user accounts I have. But I added a new user account today the same way that I added the others and it will not successfully connect. sftp -vvv user@hostname debug1: Next authentication method: password user@hostname's password: debug3: packet_send2: adding 48 (len 73 padlen 7 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug2: fd 5 setting O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug1: channel 0: free: client-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 client-session (t3 r-1 i0/0 o0/0 fd 5/6 cfd -1) debug3: channel 0: close_fds r 5 w 6 e 7 c -1 debug1: fd 0 clearing O_NONBLOCK debug3: fd 1 is not O_NONBLOCK Connection to hostname closed by remote host. Transferred: sent 2176, received 1848 bytes, in 0.0 seconds Bytes per second: sent 127453.3, received 108241.6 debug1: Exit status -1 Connection closed For a successful user: sftp -vvv good_user@hostname debug1: Next authentication method: password good_user@hostname's password: debug3: packet_send2: adding 48 (len 63 padlen 17 extra_pad 64) debug2: we sent a password packet, wait for reply debug1: Authentication succeeded (password). debug2: fd 5 setting O_NONBLOCK debug3: fd 6 is O_NONBLOCK debug1: channel 0: new [client-session] debug3: ssh_session2_open: channel_new: 0 debug2: channel 0: send open debug1: Requesting [email protected] debug1: Entering interactive session. debug2: callback start debug2: client_session2_setup: id 0 debug1: Sending subsystem: sftp debug2: channel 0: request subsystem confirm 1 debug2: fd 3 setting TCP_NODELAY debug2: callback done debug2: channel 0: open confirm rwindow 0 rmax 32768 debug2: channel 0: rcvd adjust 2097152 debug2: channel_input_status_confirm: type 99 id 0 debug2: subsystem request accepted on channel 0 debug2: Remote version: 3 debug2: Server supports extension "[email protected]" revision 1 debug2: Server supports extension "[email protected]" revision 2 debug2: Server supports extension "[email protected]" revision 2 debug3: Sent message fd 3 T:16 I:1 debug3: SSH_FXP_REALPATH . -> / sftp> I cannot figure out why one user will work and the other wont, I have restart the ssh service after adding the user. I have even removed the user and added them again to be sure I am adding it correctly.

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >