Search Results

Search found 4304 results on 173 pages for 'bytes'.

Page 91/173 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• Cannot ping static ip on eth1

  - by Calvin Froedge

  I am trying to ping the network interface I have set up for eth1. This is my config: auto eth1 iface eth1 inet static address 192.168.1.2 netmask 255.255.255.0 gateway 192.168.1.1 broadcast 192.168.1.255 If I ping 192.168.1.2, I get: Ping 192.168.1.2 (192.168.1.2) 56(84) bytes of data. From 192.168.1.3 icmp_seq=3 Destination Host Unreachable Results of ifconfig tell me that the IPv4 address is 192.168.1.3. I can ping this ip. Bcast and Mask are as expected (same as in definition). I can ping 192.168.1.3 from my macbook. I cannot ping 192.168.1.2 locally or from my macbook. Any ideas why?

  Read the article

• My Mix10 coup de coeur

  - by guybarrette

  If you ask me what was my Mix10 coup de coeur, I’d have to say Bill Buxton.  I was privileged to spend an hour an a half in a small room with about twelve people and Bill Buxton.  This man has such a incredible background and he is so inspiring.  You could really tell that he is a researcher because as he was talking about something, you could see him thinking about something else and trying at the same time to cross reference that. Here’s a list of videos recorded at Mix.  The first one is the shortest one at 9 minutes. Bytes by MSDN (Interviewed by Tim Huckaby, a legend himself) Mix Day 2 Keynote (Last 1/4) An Hour with Bill Buxton (His Mix session) Bill Buxton & Microsoft Student Insiders at MIX10 Channel 9 Live at MIX10: Bill Buxton & Erik Meijer - Perspectives on Design var addthis_pub="guybarrette";

  Read the article

• Comparing Checksums

  - by Sean Feldman

  This is something trivial, yet got me to think for a little. I had two checksums, one received from a client invoking a service, another one calculated once data sent into service is received. Checksums are plain arrays of bytes. I wanted to have comparison to be expressed as simple as possible. Quick google search brought me to a post that dealt with the same issue. But linq expression was too chatty and I think the solution was a bit muddy. So I looked a bit more into linq options presented in the post, and this is what ended up using: var matching = original_checksum.SequenceEqual(new_checksum); Sometimes things are so simple, we tend to overcomplicate them.

  Read the article

• Extended Events Code Generator v1.001 - A Quick Fix

  - by Adam Machanic

  If you're one of the estimated 3-5 people who've downloaded and are using my XE Code Generator , please note that version 1.000 has a small bug: text data (such as query text) larger than 8000 bytes is truncated. I've fixed this issue and am pleased to present version 1.001, attached to this post. Enjoy, and stay tuned for slightly more interesting enhancements! Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!...(read more)

  Read the article

• What is the best approach to copy public dynamic pages?

  - by Renan

  Situation: the government is supposed to publish official information online such as acts and laws. Problem: they're using 90s expertise to do it. You can tell that by the constant use of deprecated html tags such as <table and the lack of any compression at all, which makes some documents go way over 700,000 bytes even though they're pure text. Side problem: some companies are actually editing and selling this content that should be public and free. What I need to know is the best approach to offer said official content in my own site for free. I've thought of setting up a mirror to copy the official pages from time to time, since some of them are updated frequently, which would automatically be compressed as all my pages are via htaccess.

  Read the article

• Rebooting problem

  - by Vinoth

  After restarting my ubuntu PC, I am getting a dialog window showing "Your system is running in low graphics mode" and after clicking on 'OK', I was prompted with three options 1. Run in low graphics mode for just one session 2. Reconfigure graphics 3. Troubleshoot the error 4. Exit to console login When I troubleshoot the error, its showing the black screen with following lines which I remember: we do not own /var/log/pm-powersave.log ....................................... couldn't write bytes: Broken pipe ....................................... ....................................... Starting System V runlevel compatibility got strucked at this point. Actually before restarting, I have changed the owner for all the files under the directory "/var/log" and "/var/lib". Is there any relation with the above issue. Please help me out to resolve the issue. Its urgent.

  Read the article

• The Joy Of Hex

  - by Jim Giercyk

  While working on a mainframe integration project, it occurred to me that some basic computer concepts are slipping into obscurity. For example, just about anyone can tell you that a 64-bit processor is faster than a 32-bit processer. A grade school child could tell you that a computer “speaks” in ‘1’s and ‘0’s. Some people can even tell you that there are 8 bits in a byte. However, I have found that even the most seasoned developers often can’t explain the theory behind those statements. That is not a knock on programmers; in the age of IntelliSense, what reason do we have to work with data at the bit level? Many computer theory classes treat bit-level programming as a thing of the past, no longer necessary now that storage space is plentiful. The trouble with that mindset is that the world is full of legacy systems that run programs written in the 1970’s.  Today our jobs require us to extract data from those systems, regardless of the format, and that often involves low-level programming. Because it seems knowledge of the low-level concepts is waning in recent times, I thought a review would be in order.       CHARACTER: See Spot Run HEX: 53 65 65 20 53 70 6F 74 20 52 75 6E DECIMAL: 83 101 101 32 83 112 111 116 32 82 117 110 BINARY: 01010011 01100101 01100101 00100000 01010011 01110000 01101111 01110100 00100000 01010010 01110101 01101110 In this example, I have broken down the words “See Spot Run” to a level computers can understand – machine language.     CHARACTER:  The character level is what is rendered by the computer.  A “Character Set” or “Code Page” contains 256 characters, both printable and unprintable.  Each character represents 1 BYTE of data.  For example, the character string “See Spot Run” is 12 Bytes long, exclusive of the quotation marks.  Remember, a SPACE is an unprintable character, but it still requires a byte.  In the example I have used the default Windows character set, ASCII, which you can see here:  http://www.asciitable.com/ HEX:  Hex is short for hexadecimal, or Base 16.  Humans are comfortable thinking in base ten, perhaps because they have 10 fingers and 10 toes; fingers and toes are called digits, so it’s not much of a stretch.  Computers think in Base 16, with numeric values ranging from zero to fifteen, or 0 – F.  Each decimal place has a possible 16 values as opposed to a possible 10 values in base 10.  Therefore, the number 10 in Hex is equal to the number 16 in Decimal.  DECIMAL:  The Decimal conversion is strictly for us humans to use for calculations and conversions.  It is much easier for us humans to calculate that [30 – 10 = 20] in decimal than it is for us to calculate [1E – A = 14] in Hex.  In the old days, an error in a program could be found by determining the displacement from the entry point of a module.  Since those values were dumped from the computers head, they were in hex. A programmer needed to convert them to decimal, do the equation and convert back to hex.  This gets into relative and absolute addressing, a topic for another day.  BINARY:  Binary, or machine code, is where any value can be expressed in 1s and 0s.  It is really Base 2, because each decimal place can have a possibility of only 2 characters, a 1 or a 0.  In Binary, the number 10 is equal to the number 2 in decimal. Why only 1s and 0s?  Very simply, computers are made up of lots and lots of transistors which at any given moment can be ON ( 1 ) or OFF ( 0 ).  Each transistor is a bit, and the order that the transistors fire (or not fire) is what distinguishes one value from  another in the computers head (or CPU).  Consider 32 bit vs 64 bit processing…..a 64 bit processor has the capability to read 64 transistors at a time.  A 32 bit processor can only read half as many at a time, so in theory the 64 bit processor should be much faster.  There are many more factors involved in CPU performance, but that is the fundamental difference.    DECIMAL HEX BINARY 0 0 0000 1 1 0001 2 2 0010 3 3 0011 4 4 0100 5 5 0101 6 6 0110 7 7 0111 8 8 1000 9 9 1001 10 A 1010 11 B 1011 12 C 1100 13 D 1101 14 E 1110 15 F 1111   Remember that each character is a BYTE, there are 2 HEX characters in a byte (called nibbles) and 8 BITS in a byte.  I hope you enjoyed reading about the theory of data processing.  This is just a high-level explanation, and there is much more to be learned.  It is safe to say that, no matter how advanced our programming languages and visual studios become, they are nothing more than a way to interpret bits and bytes.  There is nothing like the joy of hex to get the mind racing.

  Read the article

• GPT Not mounting using "normal" GPT mounting techniques 12.04

  - by Roy Markham

  I've got two 2TB drivess: one MBR and the other GPT. sudo blckid /dev/sdb1 returns a blank. gdisk shows: Partition table scan: MBR: protective BSD: not present APM: not present GPT: present Found valid GPT with protective MBR; using GPT. Warning! Secondary partition table overlaps the last partition by 1970 blocks! You will need to delete this partition or resize it in another utility. Disk /dev/sdb: 3907027055 sectors, 1.8 TiB Logical sector size: 512 bytes Disk identifier (GUID): 38A1113D-B5E9-4B69-ABFF-ACB27AFB3DDD Partition table holds up to 128 entries First usable sector is 34, last usable sector is 3907027021 Partitions will be aligned on 8-sector boundaries Total free space is 2014 sectors (1007.0 KiB) Number Start (sector) End (sector) Size Code Name 1 34 262177 128.0 MiB 0C01 Microsoft reserved part 2 264192 3907028991 1.8 TiB 0700 Basic data partition mounting via fstab or -t gives same error when using NTFS or NTFS-3g "NTFS signature is missing" GParted says one partition is overwriting another, yet windows shows no errors at all. The drive is also mounted easily via MacOs (triple boot)

  Read the article

• ArchBeat Link-o-Rama Top 10 for June 23 - July 1 2012

  - by Bob Rhubart

  The top 10 most popular items as shared via my social networks for the week of June 23 - July 1 2012. Software Architecture for High Availability in the Cloud | Brian Jimerson How to Setup JDeveloper workspace for ADF Fusion Applications to run Business Component Tester? | Jack Desai Podcast: Public, Private, and Hybrid Clouds | OTN ArchBeat Podcast Read the latest news on the global user group community - June 2012 | IOUC Embrace 'big data' now or fall behind the competition, analyst warns | TechTarget ArchBeat Link-o-Rama Top 20 for June 17-23, 2012 Calculating the Size (in Bytes and MB) of a Oracle Coherence Cache | Ricardo Ferreira A Universal JMX Client for Weblogic –Part 1: Monitoring BPEL Thread Pools in SOA 11g | Stefan Koser Progress 4GL and DB to Oracle and cloud | Tom Laszewski BPM – Disable DBMS job to refresh B2B Materialized View | Mark Nelson Thought for the Day "On Monday, when the sun is hot I wonder to myself a lot: 'Now is it true, or is it not, That what is which and which is what?'" — A. A. Hodge (July 18, 1823 – November 12, 1886) Source: ThinkExist.com

  Read the article

• How does btrfs RAID work in degraded mode?

  - by turbo

  My idea was that (using loopback devices) it works like this Create the raid array sudo mkfs.btrfs -m raid1 -d raid1 /dev/loop1 /dev/loop2 You mount them sudo mount /dev/loop1 /mnt and mark them touch goodcondition You unmount and simulate disk failure (remove disk or delete loopback device loop2 in my case) You mount degraded -o degraded and mark again touch degraded You add the bad disk again sudo btrfs dev add /dev/loop2 You rebalance sudo btrfs fi ba /mnt And Raid 1 should work again. But that's not the case. sudo btrfs fi show: Total devices 3 FS bytes used 28.00KB devid 3 size 4.00GB used 264.00MB path /dev/loop1 devid 2 size 4.00GB used 272.00MB path /dev/loop2 *** Some devices missing The file degraded lives on loop1 but not on loop2 when loop2 is mounted in degraded mode. Why is that?

  Read the article

• Repeated disconnects on WPA PEAP network

  - by exasperated

  My school has a WPA PEAP network with GTC inner authentication. I am able to connect to the network, but once I load a website or two, the network become unresponsive (i.e. in Chromium, it gets stuck at "Sending request"), and I'm eventually disconnected. Any help will be greatly appreciated. Here's some log output. I can provide more if needed: Ubuntu 13.04 3.8.0-32-generic x86_64 lsusb: 03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6235 (rev 24) lsmod: iwldvm                241872  0  mac80211              606457  1 iwldvm iwlwifi               173516  1 iwldvm cfg80211              511019  3 iwlwifi,mac80211,iwldvm dmesg: [    3.501227] iwlwifi 0000:03:00.0: irq 46 for MSI/MSI-X [    3.503541] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 [    3.527153] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled [    3.527162] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled [    3.527170] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled [    3.527178] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE enabled [    3.527186] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled [    3.527192] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6235 AGN, REV=0xB0 [    3.527240] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [    3.551049] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs' [  375.153065] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [  375.159727] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [  375.553201] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [  375.559871] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 1892.110738] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 1892.117357] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5227.235372] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5227.242122] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5817.817954] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 5817.824560] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 5824.571917] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 5824.571929] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 5824.571935] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 6956.290061] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 6956.296671] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 6963.080560] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 6963.080566] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 6963.080570] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 7613.469241] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 7613.475870] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 7620.201265] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 7620.201278] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 7620.201285] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [ 8232.762453] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [ 8232.769065] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [ 8239.581772] iwlwifi 0000:03:00.0 wlan0: disabling HT/VHT due to WEP/TKIP use [ 8239.581784] iwlwifi 0000:03:00.0 wlan0: disabling HT as WMM/QoS is not supported by the AP [ 8239.581792] iwlwifi 0000:03:00.0 wlan0: disabling VHT as WMM/QoS is not supported by the AP [13763.634808] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [13763.641427] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 [16955.598953] iwlwifi 0000:03:00.0: L1 Disabled; Enabling L0S [16955.605574] iwlwifi 0000:03:00.0: Radio type=0x2-0x1-0x0 lshw:    *-network        description: Wireless interface        product: Centrino Advanced-N 6235        vendor: Intel Corporation        physical id: 0        bus info: pci@0000:03:00.0        logical name: wlan0        version: 24        serial: b4:b6:76:a0:4b:3c        width: 64 bits        clock: 33MHz        capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless        configuration: broadcast=yes driver=iwlwifi driverversion=3.8.0-32-generic firmware=18.168.6.1 ip=10.250.169.96 latency=0 link=yes multicast=yes wireless=IEEE 802.11abgn        resources: irq:46 memory:f7c00000-f7c01fff iwlist scan: Cell 02 - Address: 24:DE:C6:B0:C7:D9                     Channel:36                     Frequency:5.18 GHz (Channel 36)                     Quality=29/70  Signal level=-81 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=0000004ff3fe419b                     Extra: Last beacon: 27820ms ago                     IE: Unknown: 0009436174436861743278                     IE: Unknown: 01088C129824B048606C                     IE: Unknown: 030124                     IE: IEEE 802.11i/WPA2 Version 1                         Group Cipher : CCMP                         Pairwise Ciphers (1) : CCMP                         Authentication Suites (1) : 802.1x                     IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: 3D1624001B000000FF000000000000000000000000000000                     IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00                     IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: DD1A00904C3424001B000000FF000000000000000000000000000000           Cell 04 - Address: 24:DE:C6:B0:C3:E9                     Channel:149                     Frequency:5.745 GHz                     Quality=28/70  Signal level=-82 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=000000181f60e19c                     Extra: Last beacon: 28680ms ago                     IE: Unknown: 0009436174436861743278                     IE: Unknown: 01088C129824B048606C                     IE: Unknown: 030195                     IE: Unknown: 050400010000                     IE: IEEE 802.11i/WPA2 Version 1                         Group Cipher : CCMP                         Pairwise Ciphers (1) : CCMP                         Authentication Suites (1) : 802.1x                     IE: Unknown: 2D1ACC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: 3D1695001B000000FF000000000000000000000000000000                     IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00                     IE: Unknown: DD1E00904C33CC011BFFFF000000000000000000000000000000000000000000                     IE: Unknown: DD1A00904C3495001B000000FF000000000000000000000000000000                     IE: Unknown: DD07000B8601040817                     IE: Unknown: DD0E000B860103006170313930333032           Cell 09 - Address: 24:DE:C6:B0:C0:29                     Channel:149                     Frequency:5.745 GHz                     Quality=39/70  Signal level=-71 dBm                       Encryption key:on                     ESSID:"CatChat2x"                     Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 18 Mb/s; 24 Mb/s                               36 Mb/s; 48 Mb/s; 54 Mb/s                     Mode:Master                     Extra:tsf=00000112fb688ede                     Extra: Last beacon: 27716ms ago ifconfig (while connected): wlan0     Link encap:Ethernet  HWaddr b4:b6:76:a0:4b:3c             inet addr:10.250.16.220  Bcast:10.250.31.255  Mask:255.255.240.0           inet6 addr: fe80::b6b6:76ff:fea0:4b3c/64 Scope:Link           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1           RX packets:230023 errors:0 dropped:0 overruns:0 frame:0           TX packets:130970 errors:0 dropped:0 overruns:0 carrier:0           collisions:0 txqueuelen:1000            RX bytes:255999759 (255.9 MB)  TX bytes:16652605 (16.6 MB) iwconfig (while connected): wlan0     IEEE 802.11abgn  ESSID:"CatChat2x"             Mode:Managed  Frequency:5.745 GHz  Access Point: 24:DE:C6:B0:C0:29              Bit Rate=6 Mb/s   Tx-Power=15 dBm              Retry  long limit:7   RTS thr:off   Fragment thr:off           Power Management:off           Link Quality=36/70  Signal level=-74 dBm             Rx invalid nwid:0  Rx invalid crypt:0  Rx invalid frag:0           Tx excessive retries:0  Invalid misc:3   Missed beacon:0

  Read the article

• Metsys.Bson - the BSON Library

  Earlier this month I detailed the implementation of the bson serialization we used in Norm - the C# MongoDB driver. I've since extracted the serialization/deserialization code and created a standalone project for it - in the hopes that it might prove helpful to someone. If you need an efficient binary protocol to transfer data, look no further. There are two methods you need to be aware of: Serializer.Serialize and Deserializer.Deserialize. User u1 = new User{...}; byte[] bytes = Serializer.Serialize(u1); User...Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• Possibility of recovering files from a dd zero-filled hard disk

  - by unknownthreat

  I have "zero filled" (complete wiped) an external hard disk using dd, and from what I have heard: people said you should at least "zero fill" 3 times to be sure that the data are really wiped and no one can recover anything. So I decided to scan the disk once again after I've zero filled the disk. I was expecting the disk to still have some random binary left. It turned out that it has only a few sequential bytes in the very beginning. This is probably the file structure type and other headers stuff. Other than that, it's all zeros and nothing else. So if we have to recover any file from a zero filled disk, ...how? From what I've heard, even you zero fill the disk, you should still have some data left. ...or could dd really completely annihilate all data?

  Read the article

• Problem with Free sapce

  - by Andrew Neely

  I was zeroing out the free space on my Ubuntu 12.04 using sfill, when the command stopped responding and I had to reboot the machine. Now, the system says that it has no space left, and that it is running in low graphics mode. Before this happened, I had nearly 500 gig free. df says there are 0 bytes free. df -i reports only 2% of INODES used. I've run fsck and it didn't resolve the issue. What can I do to resolve the issue?

  Read the article

• Computer Science Fundamentals - Recommended books

  - by contactmatt

  Hey, I'm looking to see if anyone can recommend any books in fundamentals of computer science. I obtained my associates degree as a programmer/analyst a couple years ago and I know a good amount about programming on the .NET framework. I'm even certified on the .NET 4 framework as a web application developer. However, since I was only able to obtain my associates degree, I was deprived at my college on the low-level basics and operations of computers and basic computer science information. I'm really interesting in learning about the low-level operations of a computer and in programming (bytes, bits, memory management, etc.) Can anyone recommend any good computer science books for someone who is decently experienced in programming? Thank You

  Read the article

• Connected to wifi, but quits loading pages after a random amount of time

  - by Collin

  I'm using Ubuntu 12.10, on a TOSHIBA Satellite L755 laptop, and using a Cradlepoint MBR-1000 wireless router. The wifi supposedly works fine on my sisters' and mom's laptops, and my dad uses a wired connection through the router. Nobody else has the problem. It shows that I'm connected and everything. The network manager GUI shows that everything is going just dandy... but it's not. I'll be able to load a page or two, then I have to disconnect, and reconnect to the router to get it to work again for a couple minutes. I noticed when I was downstairs, close to the router, this problem seemed to go away (at least, I was connected for a couple of hours without running into this problem). When I run ping -n 8.8.8.8 it shows this while the connection is still running fine 64 bytes from 8.8.8.8: icmp_req=1187 ttl=47 time=665 ms and whe

  Read the article

• Best way to store motion changes to reduce memory

  - by Andrew Simpson

  I am comparing jpeg to jpeg in a constant 'video-stream'. i am using EMGU/OpenCV to compare each pixels at the byte level. There are 3 channels to each image (RGB). I had heard that it is common practice to store only the pixels that have changed between frames as a way of conserving memory space. But, if for instance/example I say EVERY pixel has changed (pls note i am using an exaggerated example to make my point and i would normally discard such large changes) then the resultant bytes saved is 3 times larger than the original jpeg. How can I store such motion changes efficiently? thanks

  Read the article

• Wiped data, and duplicated folders into files.

  - by Kaustubh P

  Something weird happened today, and I dont know how. Within a folder, all folders have a file by the same name, with a colon appended to it. And all the files from the most inner-most directory in my home, have been dumped to ~, with a size of 0 bytes. I have not executed any scripts or anything. I was just checking out some easter eggs, namely the gegls from outer space and free the fish and was away from the computer and was logged because of the screensaver. I couldnt log-back in with my password, so I just reset the PC, and while booting, the PC went into a drive check. BUT, IIRC, i saw the duplicate "folder files" before I had logged out, so thats not the reason! All the files have a timestamp of 14 Jan. Also, the contents of my eclipse folder have been dumped into ~. Right down to the jars and ini files. HELP!

  Read the article

• When attempting to install ubuntu 12.04 from CD, I am stuck on black streen with "loading bootlogo..."

  - by Jessica K

  I downloaded Ubuntu 12.04 to my desktop and burned to a CD using Infra Recorder and instructions on ubuntu website. Restarted PC to boot from CD receive black screen with "Loading bootlogo..." then nothing happens and I have to restart with windows. The CD seems to be correct. Folders include .disk, boot, casper, dists, install, isolinux, pics, pool, preseed, autorun file, md5sum text file, readme.diskdefines file, wubi app. System Information Operating System: Windows Vista™ Home Premium (6.0, Build 6002) Service Pack 2 (6002.vistasp2_gdr.120824-0336) System Manufacturer: TOSHIBA System Model: Satellite L305 BIOS: Default System BIOS Processor: Intel(R) Pentium(R) Dual CPU T2390 @ 1.86GHz (2 CPUs), ~1.9GHz Memory: 3062MB RAM Page File: 1553MB used, 4772MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found DxDiag Version: 7.00.6002.18107 32bit Unicode Drive: D: Model: PIONEER DVD-RW DVRKD08L ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.00.6002.18005 (English), 4/11/2009 00:39:17, 67072 bytes

  Read the article

• How can I determine which GPU card is running at PCI Express 2.0 x16 & which is using x8?

  - by M. Tibbits

  Is there a way to determine the speed of the PCI Express connection to a specific card? I have three cards plugged in: two Nvidia GTX 480's (one at x16 & and one at x8) one Nvidia GTX 460 running at x8 Is there some way, either by a function call in C or an option to lspci that I can determine the bus speed of the graphics cards? When I only use one of the cards for my CUDA program, I'd like to use the one which is running at x16. Thanks! Note: lspci -vvv dumps out For the two GTX 480s. I don't see any differences that pertain to bus speed. 03:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at df00 [disabled] [size=128] [virtual] Expansion ROM at b8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 03:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin B routed to IRQ 5 Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] Capabilities: <access denied> 04:00.0 VGA compatible controller: nVidia Corporation Device 06c0 (rev a3) Subsystem: eVga.com. Corp. Device 1480 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 16 Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] Region 5: I/O ports at cf00 [size=128] [virtual] Expansion ROM at c8000000 [disabled] [size=512K] Capabilities: <access denied> Kernel driver in use: nvidia Kernel modules: nvidia, nvidiafb, nouveau 04:00.1 Audio device: nVidia Corporation Device 0be5 (rev a1) Subsystem: eVga.com. Corp. Device 1480 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 5 Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K] Capabilities: <access denied> And the only differences I see relate specifically to the memory mapping: myComputer:~> diff card1 card2 3c3 < Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 7,11c7,11 < Region 0: Memory at d4000000 (32-bit, non-prefetchable) [size=32M] < Region 1: Memory at b0000000 (64-bit, prefetchable) [size=128M] < Region 3: Memory at bc000000 (64-bit, prefetchable) [size=64M] < Region 5: I/O ports at df00 [disabled] [size=128] < [virtual] Expansion ROM at b8000000 [disabled] [size=512K] --- > Region 0: Memory at dc000000 (32-bit, non-prefetchable) [size=32M] > Region 1: Memory at c0000000 (64-bit, prefetchable) [size=128M] > Region 3: Memory at cc000000 (64-bit, prefetchable) [size=64M] > Region 5: I/O ports at cf00 [size=128] > [virtual] Expansion ROM at c8000000 [disabled] [size=512K] 18c18 < Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- --- > Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- 19a20 > Latency: 0, Cache Line Size: 64 bytes 21c22 < Region 0: [virtual] Memory at d7ffc000 (32-bit, non-prefetchable) [disabled] [size=16K] --- > Region 0: Memory at dfffc000 (32-bit, non-prefetchable) [size=16K]

  Read the article

• Cocos2d update leaking memory

  - by Andrey Chernukha

  I have a weird issue - my app is leaking memory on device only, not on a simulator. It is leaking if i schedule update method anywhere, on any scene. It is leaking despite update method is empty, there's nothing inside it except NSLog. How can it be? I have even scheduled update on the very first scene where it seems there's nothing to leak, and scheduled another empty and it's leaking or not leaking but allocating something, the result is the same - the volume of the memory consumed is increasing and my app is crashing soon. I can detect the leakage via using Instruments-Memory-Activity Monitor or with help of following function: void report_memory(void) { struct task_basic_info info; mach_msg_type_number_t size = sizeof(info); kern_return_t kerr = task_info(mach_task_self(), TASK_BASIC_INFO, (task_info_t)&info, &size); if( kerr == KERN_SUCCESS ) { NSLog(@"Memory in use (in bytes): %u", info.resident_size); } else { NSLog(@"Error with task_info(): %s", mach_error_string(kerr)); } } Can anyone explain me what's going on?

  Read the article

• WHMCS Fatal error: Out of memory while View Invoice PDF

  - by prakash

  I can log into WHMCS & can access everything I should be able to access, but if i try to click View PDF Invoice, the following error will occur, Fatal error: Out of memory (allocated 67633152) (tried to allocate 76 bytes) in /home/xxxx/public_html/whmcs/includes/classes/class.tcpdf.php on line 8419 I have already set the allocated Memory limit to 256MB, but the error still occurs. At that time of the error, the process memory is exceeding the allocation I set. I checked log file, and found the following errors: #2 /home/xxxxx/public_html/client/includes/classes/class.tcpdf.php(8453): TCPDF->Image('/home/xxxxx/...', 20, 25, 75, 17.5816023739, 'PNG', '', '', false, 300, '', false, 8) #3 /home/xxxxx/public_html/client/includes/classes/class.tcpdf.php(7881): TCPDF->ImagePngAlpha('/home/xxxxx/...', 20, 25, 337, 79, 75, 17.5816023739, 'PNG', '', '', false, 300, '', NULL) While I was investigating the issue above I also noticed the error condition pictured below:

  Read the article

• file copy error from system to cifs mount

  - by dwpriest

  When coping a file greater than 64kB from an Ubuntu server to a CIFS mounted windows share, most of the data is copied, but it seems the last chunk doesn't get copied. The size doesn't match, and the md5 check sums don't match. I have plenty of file space, but then I use cp, I get the following... cp: closing `cloudBackup/asdf.txt': No space left on device Using rsync, I get the following... rsync: close failed on "/home/fluffy/cloudBackup/.asdf.txt.qrBWe6": No space left on device (28) rsync error: error in file IO (code 11) at receiver.c(752) [receiver=3.0.8] rsync: connection unexpectedly closed (29 bytes received so far) [sender] rsync error: error in rsync protocol data stream (code 12) at io.c(601) [sender=3.0.8] I have full read/write permissions on the mounted share. I can copy locally and between the mount and system via SSH just fine. Any ideas? Thank you

  Read the article

• Edit 100MB+ file

  - by Majid Fouladpour

  I have captured some traffic with Wireshark and saved the result as a file. The file has 3 sections now: request headers response headers response body The response body is to become an flv file, but now everything is saved as a single file. So I need a way to delete the first two sections from the file, but the problem is that the file is very big (over a thousand mega bytes). I have tried to open it with gedit, but no matter how long I wait, gedit hangs and remains unresponsive until I kill it. What tool can I use to edit this big file easily?

  Read the article

• How to emulate Mode 13h in a modern 3D renderer?

  - by David Gouveia

  I was indulging in nostalgia and remembered the first game I created, which used Mode 13h. This mode was really simple to work with, since it was essentially just an array of bytes with an element for each pixel on the screen (using an indexed color scheme). So I thought it might be fun to create something nowadays under these restrictions, but on modern hardware. The API could be as simple as: public class Mode13h { public byte[] VideoMemory = new byte[320 * 200]; public Color[] Palette = new Color[256]; } Now I'm wondering what would be the best way to get this data on the screen, using something like XNA / DirectX / OpenGL. The only solution I could think of was to create a texture with the same size as the VideoMemory array, write the contents of VideoMemory to it every frame, then render that texture in a full screen quad with the correct aspect ratio and using point texture filtering for that retro look. Is there a better way?

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >