Search Results

Search found 10402 results on 417 pages for 'pc maintenance'.

Page 87/417 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • DLINK WBR-1310B Wireless Router seems to hang...

    - by Ira Baxter
    I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it at the neighborhood computer junk store). I am using it at home (and in fact am using it at this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to it by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other IP service, e.g., POP3) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Power cycling the router fixes it. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anybody else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK because a previous Linksys died of apparant heating problems, how many do I have to cycle through before I get something that works and is long-term stable?). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy? EDIT: Happened again, while I was working on the wireless Vista laptop. (Seems like once an hour?) I was a little more careful this time. The wireless laptop can ping it. It can't get the login screen. I visited the LAN-connected PC (takes me a minute to walk from the laptop to the PC at the other end of the house), and attempted to visit a random web page. Surprise, that worked! And, now, after a minute walking back to the laptop, I can reconnect the wireless laptop, and get to the login page from it. Strange the time/date has been reset back to 2002. (I'll swear I set it and saved the system configuration after updating the firmware; it made me redo every other bit of reconfiguration again). Is there something funny about wireless leases expiring? The router says the leases it is handing out are good for 180 minutes, and the delay-to-inaccessible was only about an hour. The DSL connection seems to have a 10 minute lease.

    Read the article

  • I am unable to connect to my netbook from any machine on my network until the netbook has pinged it

    - by Samuel Husky
    I have a rather strange issue with my netbook on my local network. When trying to connect to it in any way from a remote system it does not appear to find it. However if I get the netbook to ping the machine trying to connect it mystically appears to work. Below is the ping test from my main PC to the netbook. C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Reply from 192.168.8.100: Destination host unreachable. Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Now a ping from the netbook to my main PC sam@malamute ~ $ ping 192.168.8.100 PING 192.168.8.100 (192.168.8.100) 56(84) bytes of data. 64 bytes from 192.168.8.100: icmp_req=1 ttl=128 time=2.46 ms 64 bytes from 192.168.8.100: icmp_req=2 ttl=128 time=0.835 ms 64 bytes from 192.168.8.100: icmp_req=3 ttl=128 time=1.60 ms 64 bytes from 192.168.8.100: icmp_req=4 ttl=128 time=1.32 ms 64 bytes from 192.168.8.100: icmp_req=5 ttl=128 time=1.34 ms ^C --- 192.168.8.100 ping statistics --- 5 packets transmitted, 5 received, 0% packet loss, time 4004ms rtt min/avg/max/mdev = 0.835/1.514/2.460/0.536 ms And the same ping again from the main PC after the netbook has made a connection to it C:\Users\Sam>ping 192.168.8.102 Pinging 192.168.8.102 with 32 bytes of data: Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Reply from 192.168.8.102: bytes=32 time=1ms TTL=64 Ping statistics for 192.168.8.102: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 1ms, Maximum = 1ms, Average = 1ms The netbook is running Gentoo and is currently connected via wireless. My main PC is running Windows 7 however I get the same result no matter what PC I use on this network. Please see this example from a CentOS machine on the same network [root@tiger ~]# ping 192.168.8.102 PING 192.168.8.102 (192.168.8.102) 56(84) bytes of data. From 192.168.8.200 icmp_seq=2 Destination Host Unreachable From 192.168.8.200 icmp_seq=3 Destination Host Unreachable From 192.168.8.200 icmp_seq=4 Destination Host Unreachable --- 192.168.8.102 ping statistics --- 6 packets transmitted, 0 received, +3 errors, 100% packet loss, time 5000ms , pipe 3 If you need any more information or require logs or config files please let me know and any assistance is greatly appreciated. Additional info: No responses on TCP dump from the netbook. Same result when booting into Ubuntu from a USB key. No issue when using a wired Ethernet connection.

    Read the article

  • Storing deb packages on local media

    - by Saeid87
    Is there a way to store deb packages (all or a specific version of package) on a local media (dvd, usb etc...) so later I would be able to install those packages on a PC which does not have Internet connection? For example, these are the packages that I want to install on a PC which doesn't have Internet connection: # TinyOS MSP430 GCC Compiler Repository # Version 4.6.3 deb http://tinyprod.net/repos/debian squeeze main deb http://tinyprod.net/repos/debian msp430-46 main # TinyOS version 2.1.2 deb http://tinyos.stanford.edu/tinyos/dists/ubuntu lucid main

    Read the article

  • Dell bios nightmare on optiplex

    - by Minster
    I own a Dell optiplex gx260 pc and I got bios revision a03 and want to go higher like a09 I tried the Dell support page using the Wine program down loader after a little configuring and set up on Install Shield Wizard I get the message "unable to obtain required information about your system..setup cannot complete" the pc doesn't have a floppy diskette drive any more and the other option using download manager is only executable via Windows Internet explorer I don't blame wine or anybody else but this is frustrating.

    Read the article

  • Tiny program to register work hours

    - by amin
    Hi dear ubuntu users. I'm searching for a tiny application to register my working hours so when I come to work and power on my pc it register my entrance and as a power off my pc it register me left. I know it's as simple as adding a note in gedit but I want it automated, phproject has a timer application as you start a task you push start and as you finish calculate time to register fot task , I'm searching for such small timer. thanks

    Read the article

  • mac + parallels and https site test = router restarts

    - by Erik
    Ok I have an interesting & very frustrating problem happening. I'm going to explain it the best I can. I work as a graphic designer & web designer on a mac and have a Comcast internet connection that comes through a Comcast branded router (SMC8014) which then ties into an Airport Extreme Base Station which runs my office network. I run OS 10.5.7 and also run Parallels 4.0.3 (running Windows XP) for testing websites in Internet Explorer and so on. Ok, so that the basic background. Here's my issue. I've been collaborating an ecommerce website with another designer/developer and when testing the site on the PC side we have started to run into some sort of network problem. The site is https if that matters at all I suspect it may. Basically when I run parallels for testing I am constantly having to restart the router in order to connect to the test site (it's hosted). Funny thing is I can access the rest of the internet fine, just not this site I'm working on until I restart the router (It's sorta like the site is timing out). This never happens when just running the Mac side of things. It only becomes an issue when Parallels is open and I am doing page refreshes while making css or HTML edits via something like Coda or CSS edit (connected to the hosting server via ftp). The real problem is that once the problem starts I only get about 2 or 3 page loads before I have to restart the router again. It's absolutely crippling. I cannot get any work done when I have to restart the router every couple of minutes. So, if you think this problem is isolated to me, the answer is no. The designer/developer I'm collaborating with has an office a couple miles away and experiences very similar problems under slightly different setup. He also has Comcast as his internet provider and connects his router to an Airport and primarily works on a mac. The main difference is that rather than using a visualizer like parallels to test the website on the PC he uses a real live PC that is on his network. Once he fire up the PC to do testing he runs into the same issue described above. After a couple of page refreshes in Internet Explorer or other browser on the PC the site becomes unresponsive and the router has to get restarted. Any thoughts on what is going on here would be greatly appreciated. Thanks in advance.

    Read the article

  • Can't start ubuntu on Vaio Z

    - by teocomi
    Hello, I'm trying to install Ubuntu 10.10 32bit on this pc. I have both tried with Wubi from Windows and from USB stick, but after the installation process when I select to boot Ubuntu the screen becomes black and nothing happens (btw I can hear the cpu running)! Notice that maybe it is something related to the graphic card of the pc, since when I use Ubuntu in live mode or during the installation process all the graphics and colors are messed up as if there wasn't an appropriate diriver... What can I do?? Thanks

    Read the article

  • "No root file system is defined"

    - by user169670
    Have recently installed Ubuntu 12.04.2 LTS by USB on my newly built custom pc and I have run into a problem during installation with the error saying "No root file system is defined." My pc speculations: AMD Phenom x4 955 Black Edition ASRock 960GM/U3S3 FX Micro ATX AM3+ Motherboard Mushkin Redline 8GB (2x4GB) DDR3-1866 Memory Seagate Barracuda 1.5TB 3.5" 7200RPM Internal Hard Drive XFX Radeon HD 7850 1GB Video Card XFX 550W 80 PLUS Bronze Certified ATX12V / EPS12V Power Supply Everything is new.

    Read the article

  • Laptop screen not detected but ubuntu working on other monitor

    - by Aymane El Baamri
    I have a laptop with with intel celeron inside 64 bit, the 64 bit amd ubuntu 11.10 is working on the laptop, just it wont detect the laptop screen but the same live usb worked on amd 64 pc, When i connected the desktop computer monitor to the laptop it worked perfectly with 1920x1080 screen, battery, WIFI. Im not sure if its cause i made the usb it with LiLo live usb creator on the desktop pc, should i remake the usb on the laptop?

    Read the article

  • Windows doesn't get access to internet though linux easily does

    - by flashnik
    We have a very interesting problem. The network is configured in this way: internet is connected to Trendnet switch TS DHCP server at 192.168.0.1 running on Ubuntu (S) is connected to internet switch DNS is also configured on 192.168.0.1 on S D-Link Wi-Fi boosters are connected to switch TS PCs use D-Link PCI-E Wi-Fi cards to get access to network PCs have both Ubuntu and Windows 7 There are about 40 PCs. When PC is booted to Ubuntu it easily gets access to internet. But when it's booted to Windows 7, it gets a valid IP-address, but doesn't get access to internet. The address, mask, DNS, GW-address are totally the same as when it's booted under Ubuntu. The S is reacheble and pingable. Sometimes when we are lucky the PC gets access to Internet, but after rebooting it can lose it. When PC under Windows has access, it has totally the same settings as when it doesn't. What can be done? UPDATE I shared a dropbox with 2 captures of traffic. Ping.pcap is a capture of pinging 8.8.8.8. And google-browser.pcap is a capture of opening a google.com in a browser, both of them are in tcpdump formats and made by Wireshark on Win PC. The MAC of Win PC ends on b7:63 and IP is 192.168.0.130. UPDATE2 This is ifconfig output from Ubuntu Server eth0 Link encap:Ethernet HWaddr 00:1e:67:13:d5:8d inet addr:193.200.211.74 Bcast:193.200.211.78 Mask:255.255.255.0 inet6 addr: fe80::21e:67ff:fe13:d58d/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:196284 errors:0 dropped:44 overruns:0 frame:0 TX packets:190682 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:158032255 (158.0 MB) TX bytes:156441225 (156.4 MB) Interrupt:19 Memory:c1400000-c1420000 eth0:2 Link encap:Ethernet HWaddr 00:1e:67:13:d5:8d inet addr:192.168.0.1 Bcast:192.168.0.254 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 Interrupt:19 Memory:c1400000-c1420000 eth1 Link encap:Ethernet HWaddr 00:1e:67:13:d5:8c UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 Memory:c1300000-c1320000 nslookup from Win results in DNS request timeout, nbtstat in 'not found'.

    Read the article

  • cracked dreamweaver and photoshop - private & professional use [closed]

    - by Céline Chevalier
    I am thinking of downloading the cracked versions of dreamweaver and photoshop. Am planning to do some private projects but also use it when working as a developer (professionally). Is it risky and likely to get caught? How? Not sure if they hack into my pc, find out who I am and accuse me once it is clear that I am (or my pc is) using it, or is this just naive thinking of a new inexperienced web developer?

    Read the article

  • orange screen with vertical stripes

    - by Skapeven
    After having installed Ubuntu without Internet conecction, I restart the PC, go to BIOS, change boot priority to internal harddrive, save and exit. Then the PC starts again but the screen gets orange with vertical stripes and stays like that. I tried both versions 64 bit and 32 bit 12.04. I can't use internet before having Ubuntu, because y have to make a network configuration(this is not allowed in the trial version before the installed version).

    Read the article

  • Desparately Need Help: After a mishap, a folder shows 0 files in it

    - by bobby
    I'm hoping some of you guys may be able to shed some light on this scenario: I had a odt document on which I was working from one of many files in a folder among many on an internal hard-drive. Some kind of glitch occured and the document crashed (this could have been some kind of power charge whilst another hard drive was being unmounted). As I looked into the folders surrounding the folder in which my odt document was stored, they start to show 0 files in them. I immediately switched off the PC and then re-started. Upon the re-start, the folders would show the 1,000s of files I've stored in them and then within 5 minutes, as I started to back them up, freeze, cut-off the process of transfer. When I tried to open anything on the internal hard-drive, be it an avi film, an mp3, a cbr or a word doc, they all showed blank or would work. Some folders had vastly less files showing. Eventually, things calmed down. I closed the PC, checked that the connections were in firmly, gave it a vacuum and restarted the PC. All the files eventually showed up and I started to back them up (which I'd brought a hard drive for anyway but been distracted and not done). All folders show except the one which contained the document I was working on at the time of the trouble. Strangely, it was one that should itself full on several occasions on restarts. It shows zero files now. Properties shows zero files and zero space taken by it. Yet when I drop a file into this folder by pasting it in, it disappears too. Opening the folder, there is nothing there. But if I paste that document again, the PC asks would I like to replace the existing file with the same name (that I can't see), when I click yes, the file appears. When I exit, the folder shows the 0 files in the folder. Going back into the folder, it has disappeared again. I'm hoping that someone can help give me tips to recover the files in the folder, it would be greatly, greatly appreciated. All other films, music, comics, documents show and are fine!

    Read the article

  • How to make Google SketchUp work with Intel graphics in Wine?

    - by haltman
    Hi, everybody! My pc has an Intel DH57JG mainboard, I've installed wine, launching sketchup I receive error that I don't have OpenGL installed, is there a way to configure/install it? On my previous pc with an NVidia video card installing official NVidia driver resolved it. Is there is a way to do the same with the Intel card? Running locate libgl on a terminal returns no results. thanks in advance.

    Read the article

  • Image slider not working when website is hosted on remote server [on hold]

    - by Tushar Khatiwada
    I'm having a different problem. I made a html website and it contains Nivo Slider in the index page. The site is working perfectly when viewed locally. I uploaded the site to remote server but the slider is not being displayed and the photo from the gallery is not working as expected ( popups on the local pc). The url of the site is: http://d138444.u24.elitehostingwizard.com/ The screenshot from the local pc: http://postimg.org/image/lxiqzx7br/ Thanks

    Read the article

  • how to display list of partition under 'Go' menu

    - by Roy
    I'm installing ubuntu 12.04 on my asus A43S notebook, but couldn't see any other partition under the 'Go' menu. I tried 'sudo fdisk -l' seems fine, it displays all partition. I also installed ubuntu 12.04 on my PC but there were no problems, all partition are listed under the 'Go' menu, and automaticly mounted when I clicked on them. question is, how to display all partition just like on my PC does, I don't want to mount via terminal each time I need to access them. thanks.

    Read the article

  • Share USB devices between 32 bit and 64 bit systems

    - by Sreejith S
    The latest version of USBDeviceShare, the USB over IP software, supports sharing USB devices between 32 bit and 64 bit editions of Windows. A USB device plugged in to a 64 bit PC running 64 bit version of Windows can be shared and remotely accessed from a 32 bit PC and vice versa. Download USBDeviceShare USB over Network software from http://www.sysnucleus.com/usbshare/usbshare_download.html Keywords : USB over Ethernet, USB Server, Remote USB Access, Share USB

    Read the article

  • can unbuntu 13.03 be loaded with flash drive? USB

    - by Steve Shaw
    I am wanting to do a split pc, half win xp, half unbuntu 13.04, want to use the linux for internet surfing, youtube, crackle, hulu videos viewing. My pc is a older DELL C521, 1.87ghz, 1.5 gb ram, 32bit, 80gb hd...will this be better than present slow slow slow win xp? need it for internet mostly. Would consider dumping win xp later on if I get the hang of the linux distro...any help appreciated. thanks

    Read the article

  • Le SDK Kinect pour Windows 1.5 annoncé pour mai avec la reconnaissance du français et une application Kinect Studio

    Le SDK Kinect pour Windows 1.5 annoncé pour mai avec la reconnaissance du français, une application Kinect Studio Microsoft vient de livrer ses plans pour son capteur Kinect pour PC. [IMG]http://rdonfack.developpez.com/images/kinect.jpg[/IMG] Moins de deux mois après la publication de la première version du SDK Kinect pour Windows, permettant aux développeurs de créer des applications pour PC pouvant accéder au flux de données brutes collecté par les différents capteurs Kinect, l'éditeur annonce Kinect 1.5. Le SDK Kinect 1.5 apportera des améliorations pour le suivi du squelette, intégrera ...

    Read the article

  • La télévision chinoise s'en prend à Windows 8 et critique sa sécurité, Pékin intensifie sa guerre contre les géants de l'IT américains

    La télévision chinoise s'en prend à Windows 8 et critique sa sécurité Pékin intensifie sa guerre contre les géants de l'IT américainsLa Chine n'apprécie pas Windows 8. Le gouvernement a intensifié sa guerre contre le système d'exploitation, après avoir interdit l'OS sur ses nouveaux PC, sous prétexte qu'il voulait éviter qu'un scénario similaire à Windows XP puisse se produire, c'est-à-dire, éviter de se retrouver plus tard avec un nombre important de PC sous un OS qui ne bénéficiera plus de support.La...

    Read the article

  • Ubuntu will not boot without the pen-drive [closed]

    - by user71238
    Possible Duplicate: Can't boot without Flash Drive plugged in I've just installed Ubuntu on my PC and now it doesn't start unless I change the boot priority, if boot priority is my HD then it doesn't start and if boot priority is my pen-drive then it starts. If I remove my pen-drive, the system keep working normal, but if a restart my PC without the pen-drive, it will not start. Could someone help me?

    Read the article

  • Game-over! Gaining Physical access to a computer

    Security requires defense in depth. The cleverest intrusion detection system, combined with the best antivirus, won’t help you if a malicious person can gain physical access to your PC or server. A routine job, helping a family member remove a malware infection, brings it home to Wesley just how easy it is to get a command prompt with SYSTEM access on any PC, and inspires him to give a warning about the consequences.

    Read the article

  • Are there specific benefits to using XNA for 2D development if you don't plan on releasing on xbox/windows phone?

    - by ssb
    I've been using XNA for a while to tinker with 2D game development, but I can't help but feel constrained by the content pipeline when targeting PC only. Things like no vector fonts or direct use of graphics files make it a pain while other frameworks do these things with no problem. I like XNA because it's robust and has a lot of support, but what are the specific benefits that I'd get developing exclusively for PC, if there are any at all?

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >