Search Results

Search found 18251 results on 731 pages for 'rc local'.

Page 87/731 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

  • SVN Authentication with LDAP and Active Directory

    - by Alex Holsgrove
    I am having a few problems getting SVN authentication to work with LDAP / Active Directory. My SVN installation works fine, but after enabling LDAP in my apache vhost, I just can't get my users to authenticate. I can use a selection of LDAP browsers to successfully connect to Active Directory, but just can't seem to get this to work. SVN is setup in /var/local/svn Server is svn.domain.local For testing, my repository is /var/local/svn/test My vhost file is as follows: <VirtualHost *:80> ServerAdmin [email protected] ServerAlias svn.domain.local ServerName svn.domain.local DocumentRoot /var/www/svn/ <Location /test> DAV svn #SVNListParentPath On SVNPath /var/local/svn/test AuthzSVNAccessFile /var/local/svn/svnaccess AuthzLDAPAuthoritative off AuthType Basic AuthName "SVN Server" AuthBasicProvider ldap AuthLDAPBindDN "CN=adminuser,OU=SBSAdmin Users,OU=Users,OU=MyBusiness,DC=domain,DC=local" AuthLDAPBindPassword "admin password" AuthLDAPURL "ldap://192.168.1.6:389/OU=SBSUsers,OU=Users,OU=MyBusiness,DC=domain,DC=local?sAMAccountName?sub?(objectClass=*)" Require valid-user </Location> CustomLog /var/log/apache2/svn/access.log combined ErrorLog /var/log/apache2/svn/error.log </VirtualHost> In my error.log, I don't seem to get any bind errors (should I be looking elsewhere?), but just the following: [Thu Jun 21 09:51:38 2012] [error] [client 192.168.1.142] user alex: authentication failure for "/test/": Password Mismatch, referer: http://svn.domain.local/test/ At the end of "AuthLDAPURL", I have seen people using TLS and NONE but neither seem to help in my case. I have the ldap modules loaded and have checked as much as I know, so any help would be most welcome. Thanks

    Read the article

  • How to force a clock update using ntp?

    - by ysap
    I am running Ubuntu on an ARM based embedded system that lacks a battery backed RTC. The wake-up time is somewhere during 1970. Thus, I use the NTP service to update the time to the current time. I added the following line to /etc/rc.local file: sudo ntpdate -s time.nist.gov However, after startup, it still takes a couple of minutes until the time is updated, during which period I cannot work effectively with tar and make. How can I force a clock update at any given time? UPDATE 1: The following (thanks to Eric and Stephan) works fine from command line, but fails to update the clock when put in /etc/rc.local: $ date ; sudo service ntp stop ; sudo ntpdate -s time.nist.gov ; sudo service ntp start ; date Thu Jan 1 00:00:58 UTC 1970 * Stopping NTP server ntpd [ OK ] * Starting NTP server [ OK ] Thu Feb 14 18:52:21 UTC 2013 What am I doing wrong? UPDATE 2: I tried following the few suggestions that came in response to the 1st update, but nothing seems to actually do the job as required. Here's what I tried: Replace the server to us.pool.ntp.org Use explicit paths to the programs Remove the ntp service altogether and leave just sudo ntpdate ... in rc.local Remove the sudo from the above command in rc.local Using the above, the machine still starts at 1970. However, when doing this from command line once logged in (via ssh), the clock gets updated as soon as I invoke ntpdate. Last thing I did was to remove that from rc.local and place a call to ntpdate in my .bashrc file. This does update the clock as expected, and I get the true current time once the command prompt is available. However, this means that if the machine is turned on and no user is logged in, then the time never gets updates. I can, of course, reinstall the ntp service so at least the clock is updated within a few minutes from startup, but then we're back at square 1. So, is there a reason why placing the ntpdate command in rc.local does not perform the required task, while doing so in .bashrc works fine?

    Read the article

  • How can I get Haproxy to not log local requests?

    - by coneybeare
    I am trying to clean out some of the log clutter from my machines and am starting by removing requests that are generated from the server themselves. I have cache warmers running around the clock and I don't want these polluting the logs. I was able to get apache to stop logging local requests by adding a dontlog for the local IP: SetEnvIf Remote_Addr "RE\.DA\.CT\.ED" dontlog CustomLog "|logger -p local3.info -t http" combined env=!dontlog and now I am looking for something similar to put in a configuration for the Haproxy log. How can I prevent 127.0.0.1 requests from writing to the Haproxy log? UPDATE: 2/15/11 I use the excellent loggly service to pull out logs in the cloud, but I am seeing tons of logs like this: 2011 Feb 15 06:09:42.000 ip-10-251-194-96 http: RE.DA.CT.ED - - [15/Feb/2011:06:09:42 -0500] "HEAD /search/Nevad/predictive/txt HTTP/1.0" 200 - "-" "Wget/1.10.2 (Red Hat modified)" 2011 Feb 15 06:09:42.000 127.0.0.1 haproxy[10390]: 127.0.0.1:58408 [15/Feb/2011:06:09:42] www i-5dd7a331.0 0/0/0/8/8 200 210 - - --NI 0/0/0 0/0 "HEAD /search/Nevad/predictive/txt HTTP/1.1" and I want them gone. This question focuses on how to remove that haproxy log line from writing to the server side log in the first place.

    Read the article

  • Service Layer - how broad should it be, and should it be used also on the local application?

    - by BornToCode
    Background: I need to build a main application with some operations (CRUD and more) (-in winforms), I need to make another application which will re-use some of the functions of the main application (-in webforms). I understood that using service layer is the best approach here. If I understood correctly the service should be calling the function on the BL layer (correct me if I'm wrong) The dilemma: In my main winform UI - should I call the functions from the BL, or from the service? (please explain why) Should I create a service for every single function on the BL even if I need some of the functions only in one UI? for example - should I create services for all the CRUD operations, even though I need to re-use only update operation in the webform? YOUR HELP IS MUCH APPRECIATED

    Read the article

  • How come I can not install plugins on my local Wordpress install?

    - by classer
    Hello, I got WordPress up and running fine on Ubuntu 10.04 by using this source except that when I try to update and install themes/plugins I get this following error message in wp-admin page: Installing Plugin: WordPress.com Stats 1.8.1 Downloading install package from http://downloads.wordpress.org/plugin/stats.1.8.1.zip… Unpacking the package… Could not create directory. /var/www/wordpress/wp-content/upgrade/stats.tmp/stats Actions: Return to Plugin Installer At first I thought I had to setup an FTP account but searched more and I found some information that says that I need to change the permissions of the wp-content folder which is located in the directory: /var/www/wordpress/wp-content I tried changing it by doing: sudo chmod -R 777 wp-content/ but when I tried installing a plugin I got the same error message. I also tried passing it 755 as a permission but still got the same thing. I settled on 755 because it is more secure I have read. How can I solve this problem safely and securely?

    Read the article

  • How can I manage changes between a local config file and a remote config file in a mobile application?

    - by hib
    I have an application with a configuration file that is stored in the application bundle. This config file stores the names of images on a remote server. Whenever the application is started, I download the configuration file from the server and see if there are any changes or updates. If there are changes, I iterate over the array of configuration settings and download the changed images to the user's iPhone I think that I will first list all of the name changes in an array, and after that start loading that changed images. However, I'm wondering if there is a better approach to solving this problem.

    Read the article

  • How to use update-java-alternatives with a local installation of the JDK?

    - by user827992
    I have Ubuntu 12.04 amd64 installed on my machine, on the previous versions of Ubuntu it was deadly easy, now there is this command update-java-alternatives with a really bad man page. I just have my JDK unpacked on a mounted partition like /media/mydisk/jdk, how i can force the use of that JDK instead of the one that comes in the Ubuntu repository? What is the logic behind this update-java-alternatives ?

    Read the article

  • Secure, efficient, version-preserving, filename-hiding backup implemented in this way?

    - by barrycarter
    I tried writing a "perfect" backup program (below), but ran into problems (also below). Is there an efficient/working version of this?: Assumptions: you're backing up from 'local', which you own and has limited disk space to 'remote', which has infinite disk space and belongs to someone else, so you need encryption. Network bandwidth is finite. 'local' keeps a db of backed-up files w/ this data for each file: filename, including full path file's last modified time (mtime) sha1sum of file's unencrypted contents sha1sum of file's encrypted contents Given a list of files to backup (some perhaps already backed up), the program runs 'find' and gets the full path/mtime for each file (this is fairly efficient; conversely, computing the sha1sum of each file would NOT be efficient) The program discards files whose filename and mtime are in 'local' db. The program now computes the sha1sum of the (unencrypted contents of each remaining file. If the sha1sum matches one in 'local' db, we create a special entry in 'local' db that points this file/mtime to the file/mtime of the existing entry. Effectively, we're saying "we have a backup of this file's contents, but under another filename, so no need to back it up again". For each remaining file, we encrypt the file, take the sha1sum of the encrypted file's contents, rsync the file to its sha1sum. Example: if the file's encrypted sha1sum was da39a3ee5e6b4b0d3255bfef95601890afd80709, we'd rsync it to /some/path/da/39/a3/da39a3ee5e6b4b0d3255bfef95601890afd80709 on 'remote'. Once the step above succeeds, we add the file to the 'local' db. Note that we efficiently avoid computing sha1sums and encrypting unless absolutely necessary. Note: I don't specify encryption method: this would be user's choice. The problems: We must encrypt and backup 'local' db regularly. However, 'local' db grows quickly and rsync'ing encrypted files is inefficient, since a small change in 'local' db means a big change in the encrypted version of 'local' db. We create a file on 'remote' for each file on 'local', which is ugly and excessive. We query 'local' db frequently. Even w/ indexes, these queries are slow, since we're often making one query for each file. Would be nice to speed this up by batching queries or something. Probably other problems that I've now forgotten.

    Read the article

  • How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

    - by Maharshi Raval
        I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

    Read the article

  • How configure 2 Lan cards in Windows 7/8 pc one to connect to Internet and other to Local Network

    - by Maharshi Raval
        I am about to install a dedicated VOIP server in our office. It is a 3CX pbx system on Windows 7/8 machine. The environment currently is a Windows SBS 2011 with 8 client machines. I want to use a dedicated broadband connection for the PBX (3CX) box, but the box also needs to be accessible in the local network as we will be using IP Phones and software IP phones. How configure two network cards on PBX box, so that one will be always used to connect to our SIP host over the Internet and the other will be connected to local network accessible from other client pc to connect to the pbx system. It must be noted that currently the Windows SBS 2011 acts as the Primary Domain Controller and gateway for all the client machines.     I cannot use a load balancer as it will conflict and cause issues within the current setup of our SBS2011 as it is also our Exchange Server. Any input is much appreciated. thanks in advance

    Read the article

  • Service Layer - how broad should it be, and should it also be on the local application?

    - by BornToCode
    Background: I need to build a desktop application with some operations (CRUD and more) (=winforms), I need to make another application which will re-use some of the functions of the main application (=webforms). I understood that using service layer is the best approach here. If I understood correctly the service should be calling the function on the BL layer (correct me if I'm wrong) The dilemma: In my main winform UI - should I call the functions from the BL, or from the service? (please explain why) Should I create a service for every single function on the BL even if I need some of the functions only in one UI? for example - should I create services for all the CRUD operations, even though I need to re-use only update operation in the webform? YOUR HELP IS MUCH APPRECIATED

    Read the article

  • What is wrong with those crontabs?

    - by Guillaume Boudreau
    I want my projectors to Power On before the mall opens, and Power Off when the mall closes. So I created crontab entries (that I placed in /etc/cron.d/mall), but today (Thu Nov 22 18:58:29 EST 2012 is the current date on that server), the power-off.sh script got executed at 17:20 (see syslog excerpt below). Being Thu, Nov. 22, I would have expected the power-off.sh script to be executed at 21:20, per the 4th crontab line below. Why did power-off.sh execute at 17:20? What is wrong with my crontab entries? Content of /etc/cron.d/mall: 40 9 22-30 Nov Mon-Sat myuser /usr/local/projectors/power-on.sh 40 10 22-30 Nov Sun myuser /usr/local/projectors/power-on.sh 20 18 22-30 Nov Mon-Wed myuser /usr/local/projectors/power-off.sh 20 21 22-30 Nov Thu-Fri myuser /usr/local/projectors/power-off.sh 20 17 22-30 Nov Sat-Sun myuser /usr/local/projectors/power-off.sh 40 9 1-22 Dec Mon-Sat myuser /usr/local/projectors/power-on.sh 40 10 1-22 Dec Sun myuser /usr/local/projectors/power-on.sh 20 21 1-22 Dec Mon-Fri myuser /usr/local/projectors/power-off.sh 20 17 1-22 Dec Sat-Sun myuser /usr/local/projectors/power-off.sh syslog excerpt: $ grep power-off.sh /var/log/syslog Nov 22 17:20:01 lanner-ubu-c2d CRON[23007]: (myuser) CMD (/usr/local/projectors/power-off.sh)

    Read the article

  • Openbsd init script for ssh VPN tunnel

    - by manthis
    I have a server hosting SSH tunnels and Openbsd 4.5 clients connecting to it. Things work just fine but I am in the need of automating the connection from the client to the server. So that if the client is accidentally rebooted, then the connection initiates unattended. So it should be as straight forward as to include the ssh connection in an init script. However I have miserably failed to do so by including it to /etc/rc.local, which is the file I usually do this sort of things in. Right now I am using autossh to also restart the connection if necessary and the script that I put on /etc/rc.local follows: #!/bin/sh # # Example script to start up tunnel with autossh. # # This script will tunnel 2200 from the remote host # to 22 on the local host. On remote host do: # ssh -p 2200 localhost # # $Id: autossh.host,v 1.6 2004/01/24 05:53:09 harding Exp $ # ID=root HOST=example.com #AUTOSSH_POLL=600 #AUTOSSH_PORT=20000 #AUTOSSH_GATETIME=30 #AUTOSSH_LOGFILE=$HOST.log #AUTOSSH_DEBUG=yes #AUTOSSH_PATH=/usr/local/bin/ssh export AUTOSSH_POLL AUTOSSH_LOGFILE AUTOSSH_DEBUG AUTOSSH_PATH AUTOSSH_GATETIME AUTOSSH_PORT autossh -2 -f -M 20000 ${ID}@${HOST} The script detaches just fine when run manually so I just include it on /etc/rc.local as echo -n 'starting local daemons:' if [ -x /usr/local/sbin/autossh.sh ]; then echo -n 'ssh tunnel' /usr/local/sbin/autossh.sh fi echo '.' I have also tried calling it from /etc/hostname.tun0 in case there may be issues with /etc/rc.local not being called at the right time when network connections are ready, so I would use: inet 10.254.254.2 255.255.255.252 10.254.254.1 !/usr/local/sbin/autossh.sh Your input is highly appreciated.

    Read the article

  • How do you setup Postfix/Dovecot/MySQL to not look for local accounts?

    - by thiesdiggity
    I am having an issue with one of my Postfix/Dovecot mail servers and I'm unsure how to fix the problem. I will try to explain it in detail, here it goes: I have an Ubuntu server setup using Virtual hosting with Postfix, Dovecot and MySQL. We have one domain setup as a virtual domain, for this example I am going to use mail.example.com. Under that domain we have one email address. I have another server (MS Exchange) setup using another one of my sub-domains, ex.example.com. The problem is that when I SMTP into the account on mail.example.com and try to send an email to an account on ex.example.com, I get the email returned back to us with an "unknown host" error. Now, I know that the mail.example.com server can resolve the ex.example.com domain because I can ping/dig while SSH'd into it. I can also log into Postfix via Telnet and send an email to an ex.example.com mailbox. I'm guessing that it has something to do with Postfix/Dovecot looking locally for the domain in the virtual domain list because of the tld domain (example.com)? If that's the case, how do I get Postfix/Dovecot to only look locally for the entire URL (mail.example.com) and if it doesn't find it, send it to the correct server by looking up the MX/A records (which I know exist and are setup correctly)? I have been working on this all day and any guidance would be GREATLY appreciated! Thanks for your time!

    Read the article

  • $PATH is driving me nuts

    - by Chris4d
    OK, apologies if this is something dumb, but I'm running out of ideas. Goal: prepend /usr/local/bin to $PATH Problem: $PATH won't do what I want or expect How I got here: I want to start learning to program, so I'm getting comfortable messing around under the hood, but don't have a lot of experience. I installed the fish shell (because it's friendly!) using homebrew and set it as my default shell (under system prefs>users & groups>advanced). At some point, I ran brew doctor to see if my installs were all kosher, and it suggested I move /usr/local/bin to the front of $PATH so that I could use my installation of git rather than the system copy. Fine - but between path_helper and fish, something was happening to $PATH that was out of my control, and I could never get the paths arranged in the right way. Environment: OSX 10.8.2, upgraded from 10.7ish, with xcode and devtools installed, plus x11, homebrew, and fish More info: I've set my user's default shell back to bash, and tried a variety of shells thru terminal.app - bash, fish, sh. I moved /usr/local/bin to the top of /etc/paths but it didn't change anything. I looked thru the various config.fish files and commented out stuff that might mess with $PATH, didn't help. I have the following files in /etc/paths.d/: ./10-homebrew containing /usr/local/bin ./20-fish containing /usr/local/Cellar/fish/1.23.1/bin ./40-XQuartz containing /opt/X11/bin I added set +x to my profile and when I start terminal.app I get: Last login: Mon Oct 1 13:31:06 on ttys000 + '[' -x /usr/libexec/path_helper ']' + eval '/usr/libexec/path_helper -s' ++ /usr/libexec/path_helper -s PATH="/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin:/usr/local/Cellar/fish/1.23.1/bin:/opt/X11/bin"; export PATH; + '[' /bin/bash '!=' no ']' + '[' -r /etc/bashrc ']' + . /etc/bashrc ++ '[' -z '\s-\v\$ ' ']' ++ PS1='\h:\W \u\$ ' ++ shopt -s checkwinsize ++ '[' Apple_Terminal == Apple_Terminal ']' ++ '[' -z '' ']' ++ PROMPT_COMMAND='update_terminal_cwd; ' ++ update_terminal_cwd ++ local 'SEARCH= ' ++ local REPLACE=%20 ++ local PWD_URL=file://Chriss-iMac.local/Users/c4 ++ printf '\e]7;%s\a' file://Chriss-iMac.local/Users/c4 Chriss-iMac:~ c4$ So it looks like path_helper runs, but then running echo $PATH nets me /usr/bin:/bin:/usr/sbin:/sbin. So, it looks like path_helper isn't even doing what it's supposed to anymore? I'm sure there is some well-defined behavior here that I don't understand, or I borked something while trying to fix it. Please help!

    Read the article

  • Why does HP Update at remote system trigger RDP printing at local system?

    - by lcbrevard
    This is obscure. When connected with RDP to another system that has HP Update installed on it, either directly running the HP Update or having the notification pop up to ask if you want to run HP Update causes the local system to try to print something to peculiarly-chosen-local-printer. Case 1: Desktop Win 7 Ult system RDP connected to HP Laptop Win 7 Ult system. When HP Update runs on the laptop a dialog for XPS Writer Save As... appears on Desktop system. Even if you put in a name, nothing gets generated and the dialog repeats. And repeats. Until you (a) close the RDP connection and (b) clean out the queued entries. If the HP Update pops up the request to run the update and you are not at the desk when this happens, there can be dozens of queued requests for this bogus printing. NOTE: the XPS Writer is not selected as a default printer on either system. Case 2: (Different) HP Laptop Win 7 Ult system RDP connected to XP Pro "brand X" desktop system but with HP printer drivers installed. If the request to run HP Update notification pops on the XP system, dozens of attempts to print, in this case to a Versa Check Printer driver, are queued. Dismissing the HP request, closing RDP, and cleaning out the queue are required to stop this. NOTE: the Versa Check Writer is not selected as a default printer on either system. THE QUESTION: What the heck is going on here? Some kind of scripting or COM activity that is misdirected?

    Read the article

  • Best strategy to discover a web service in a local network?

    - by Ucodia
    I am currently doing some research for a project. The setup is simple, I have a computer running a service in my home network and any device connected to that same network should be able to discover the service automatically and use it. I have no specific technology requirement whether it is on the server or client side. The client knows about the service definition. Other than that I have no idea what strategy to use, what technology to look at or whether I should go for a SOAP or a HTTP based service. I think going HTTP with REST API is the best for targeting all devices but I am opened to any suggestions. Thanks.

    Read the article

  • How do non-coders do simple local templating to avoid redundant HTML? [closed]

    - by Max Cantor
    I'm a web developer. When I start designing a site, I use a framework to handle templating for me, even if it's just rack + erubis. What do non-developers do? If you want to implement a site in HTML and CSS without a framework running on a webserver, without frames, and without WYSYWIG tools like Dreamweaver... how do you avoid copy-and-pasting the HTML of your navigation (for example) on every single page you're writing? I feel stupid asking this because it seems like their must be an obvious answer, but for the life of me, I can't think of one right now.

    Read the article

  • Service Layer - how broad should it be, and should it also be used from the local application?

    - by BornToCode
    The background: I need to build a desktop application with some operations (CRUD and more) (=winforms), I need to make another application which will re-use some of the functions of the main application (=webforms). I'm using service layer for reusing my functions. The service is calling the functions on the BL layer (correct me if I'm doing this wrong). so my desktop has 4 projects - DAL, BL, UI, WEBSERVICES. The dilemma (simple but I still need some more experienced opinions): In my main winform UI - should I call the functions from the BL - bl.getcustomers(), or do it similar to how I call it in the webform, and call the functions from the service - webservices.getcustomers? Should I create a service for every single function on the BL even if I need some of the functions only in one UI? for example - should I create services for all the CRUD operations, even though I need to re-use only update operation in the webform? YOUR HELP IS MUCH APPRECIATED

    Read the article

  • Must have local user to authenticate Samba to AD?

    - by Phil
    I've got a CentOS 5.3 server with Samba running. I've joined this server to my domain in the hopes of allowing AD users some access to my Samba shares. I've found that this works, but only as long as the AD username that I'm trying to authenticate with is also a local user on the server. In other words, if I'm trying to access a share, and try to authenticate with the AD username "joe", I get errors unless I create a user named 'joe' on the server. I don't have to create a matching password or anything....the local user's password is always blank, so I do know that the authentication is actually happening against the AD. Here's my smb.conf file: [global] workgroup = <mydomain> server string = <snip> netbios name = HOME security = ADS realm = <mydomain.com> password server = <snip> auth methods = winbind log level = 1 log file = /var/log/samba/%m.log [amore] path = /var/www/amore browseable = yes writable = yes valid users = DOMAIN\user1 DOMAIN\user2 DOMAIN\user3 DOMAIN\user4 I would assume that my kerberos settings are fine, as I've joined the domain and can use wbinfo to see users and groups. However, I can provide that info if necessary. Anyone have any ideas?

    Read the article

  • How do I get yum to see updates to a local repo without cleaning cache?

    - by Matt
    I have set up a local yum repository which I use to install test builds. For the testing purposes, my packages are versioned by <svn version number>.<date>.<time> (e.g. 12345.20110908.150404 The trouble is, once I make a new RPM, copy it to the repository directory and run createrepo $REPO_DIR, yum does not see the new RPM as being available. $ cd $REPO_DIR $ ls -1 repodata package-12345.20110908.150404-1.x86_64.rpm package-12345.20110908.174329-1.x86_64.rpm $ createrepo . # ...snip... $ rpm -q package package-12345.20110908.150404-1.x86_64 $ yum list --showduplicates package Installed Packages package.x86_64 12345.20110908.150404-1 @repo Available Packages package.x86_64 12345.20110908.150404-1 repo I can see the updates and grab them if I run yum clean all and then re-fetch the metadata, but I think this just means I need to be doing something else from the repo, as I don't have to do that for other yum repos. How do I need to set up my local repository so that I only need to run yum update from the client without having to clean my yum cache?

    Read the article

  • How to get local point inside a body where mouse click occurred in box2d?

    - by humbleBee
    I need to find out the point inside a body, lets say a rectangular object, where the mouse was clicked on. I'm makin a game where the force will be applied depending on where the mouse was clicked on the body. Any ideas? Will body.GetLocalPoint(b2vec2) work? I tried by passing the mouse coordinates when the click occurred when inside the body but if the body's position is (400,300) in world coordinates then for trace(body.GetLocalPoint(new b2vec2(mouseX,mouseY)).x); I get some value between 380 to 406 or something (eg. 401.6666666). I thought getLocalPoint will give something like x=-10 when clicked to the left of the centre of body or x=15 when clicked to the right. Language is As3 btw.

    Read the article

  • Saving more corsor positions (with tput?) in bash terminal

    - by AndreasT
    I know that tput sc saves the current cursor position and tput rc restores it exactly where tput sc was called. The problem is that every time tput sc is called, it overwrites the previous saved position. Is there a way to save more positions, e.g. tput sc pos1 and tput sc pos2 which can be restored with, say, tput rc pos1 and tput rc pos2 respectively? (The solution need not make use of tput, I mentioned it because it's the only command I know that handles cursor position) If not, is there a way to at least save the cursor position locally in a function, so that if a function uses tput sc and then calls another function that runs again tput sc, then each function restores its own saved cursor position when invoking tput rc? Thanks in advance.

    Read the article

  • Anyone have a script to delete a specific local windows profile?

    - by Jordan Weinstein
    I'm looking for Powershell (preferred) script, or .CMD or .VBS, to delete a specific user profile on a workstation (WinXP) or terminal server (2000, '03 or '08). I know all about the delprof utility... That only allows you delete based on a period of inactivity. I want a script to: prompt admin for a username delete that username's profile and to delete the entire profile - registry hive too (not just the folder structure within Documents and Settings). The same way it would if you went to My Computer Properties Advanced tab User Profiles Settings and deleted profiles from there. Any ideas? All I can think of is doing an AD lookup to get the SID of the user specified, then using that to delete the correct registry hive too... something simpler would be nice though... Basically, my HelpDesk used to be local administrators on our Citrix servers and a common fix for various issues was for them to delete a user's profile on the citrix server(s) and have that user log back in - voila, whatever issue they had was resolved. Going forward, in new Citrix environment, they will no longer be local admins on those boxes, but still need to be able to delete profiles (deleting the entire profile: folder and reg hive is key). thanks.

    Read the article

  • Linux SFTP and many local user accounts, limits with mount --bind?

    - by user123428
    I am in the process of building a solution to handle many developers (possibly hundreds) to work on their files via sftp, each one Jailed in their home directory. For our particular needs, we have a samba mount point that contains all of the users home directories. I have started developing the following solution and hit some walls: - I have configured a Ubuntu Lucid Server as sftp server. - In order to jail the user in their home directory (without allowing them the browse a directory up and seeing all the other users folders) I am using mount --bind and not a symbolic link (also some ftp clients don't really work with sym links). - The user accounts are local unix user accounts on the sftp server (not using a directory service or anything) that have an empty home folder created on the local machine, then I use mount --bind to bind the empty folder to the actual users home directory on the samba share. With this solution I am hitting a couple of problems, in the case of a server reboot, all the mount --binds are lost because they are not written in fstab. Then I have read somewhere that the maximum amount of entries in fstab are 400 (which does not really help us). I have thought of a solution of writing something that stores the mounts in a text file as a backup and on server reboot, run the script that re mounts. I am just really unsure about this whole process and was wondering if anyone has any insight on possibly a better solution for SFTP? (not FTP)

    Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >