Search Results

Search found 3898 results on 156 pages for 'unknown'.

Page 87/156 | < Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >

• modprobe ndiswrapper - not found

  - by David

  I'm trying to use ndiswrapper on a Slackware 12 (I think) box, but I'm running into a problem with modprobe. Everything I find online says that it should be working, but for some unknown reason it isn't. Here's what I've done so far: Installed ndiswrapper (latest tarball, make, make install) Ran ndiswrapper -i on the WinXP driver for my USB wireless card Ran ndiswrapper -l which tells me the driver is present and the device is present (lsusb also confirms the device is present) Ran ndiswrapper -m which put an alias for wlan0 in /etc/modprobe.d/ndiswrapper.conf Ran depmod -a Ran modprobe ndiswrapper which tells me "FATAL: module ndiswrapper not found" Ran modprobe -l which shows no listing for ndiswrapper I even tossed in a reboot or two while trying various combinations of the above, still nothing. So naturally ifconfig wlan0 up isn't working because the device isn't being created, presumably because the module isn't loading the driver. Does anybody have any suggestions? Everything points to the notion that this should work fine, but modprobe just isn't able to find what it needs. Have I missed an important step?

  Read the article

• Mercurial says hgrc is untrusted in Emacs, but works fine from the command line

  - by Ken

  I've got some Mercurial checkouts in a directory that was mounted by root. Mercurial is usually suspicious of files that aren't mine, but I'm the only user here, so I put: [trusted] users = root groups = root in my ~/.hgrc, and now I can use hg from the command line with no warnings or errors about anything being untrusted. So far, great. But when I try to run, say, vc-annotate in Emacs, I get an Annotate buffer that says: abort: unknown revision 'Not trusting file /home/me/.../working-copy/.hg/hgrc from untrusted user root, group root Not trusting file /home/me/.../working-copy/.hg/hgrc from untrusted user root, group root 7648'! The message area says: Running hg annotate -d -n --follow -r... my-file.c...FAILED (status 255) I don't have anything in my .emacs related to vc or hg. Other commands, like vc-diff, work fine. What am I missing here?

  Read the article

• How to detect device type from device connected to router?

  - by molly

  I have a att router and there is an unknown device connected to my network. I can't seem to kick it off because of how att's router settings are created which is kind of dumb. I am able to see its local ip and mac address. I am on a mac with snow leopard. How can I get more information on the device with the information that I have? I want to see what kind of device it is, I have checked all devices that are connected to the router and none seem to match the local ip that is connected. I have WPA encryption setup with a strong password.

  Read the article

• Address already in use - Amazon AWS

  - by Peter

  I've run into a really weird issue. I was debugging a server 500 error script on our EC2 instance and found that we didn't have ioncube loaders installed. So I went to go install them and I created a new file at /etc/php.d/zend.ini and initially I inserted the value of extension=/usr/local/ioncube/ioncube_loader_lin_5.3.so and restarted httpd at which point it told me: The ionCube Loader is a Zend-Engine extension and not a module Please specify the Loader using 'zend_extension' in php.ini PHP Fatal error: Unable to start ionCube Loader module in Unknown on line 0 So I changed the contents of zend.ini to zend_extension=/usr/...etc. Now when I attempt to restart httpd I get this error: Starting httpd: (98)Address already in use: make_sock: could not bind to address [::]:80 (98)Address already in use: make_sock: could not bind to address 0.0.0.0:80 no listening sockets available, shutting down Unable to open logs I can't even run /etc/init.d/httpd stop without it erroring. I've since removed zend.ini to see if that's what caused it and it doesn't seem to be. Any ideas?

  Read the article

• Can remote LogMeIn Hamachi users access our local LAN?

  - by Kev

  Unknown to me, one of the kids has installed LogMeIn Hamachi on his PC so that he can access and play on his pal's Minecraft server, and vice versa. One of the things I did was disable the Client for Microsoft Networks and File and Printer Sharing for Microsoft Networks on the Hamachi NIC in Windows 7's Network Connections. However, my lack of fu when it comes to these types of services is leaving me feeling a little uncomfortable about him using this. Is there anything I should be worried about here? For example, can his friends access our local LAN (which has a number of NAS boxes with unsecured shares) and get up to no good?

  Read the article

• how to detect device type from connected device to router?

  - by molly

  i have a att router and there is an unknown device connected to my network. i cant seem to kick it off because of how att's router settings are created which is kind of dumb. i am able to see its local ip and mac address. i am on a mac with snow leopard. how can i get more information on the device with the information that i have? i want to see what kind of device it is, i have checked all deviced that are connected to the router and non seem to match the local ip that is connected. i have wpa encryption setup with a strong password.

  Read the article

• Window 2003 Server - Logon Failure error message in Event Viewer

  - by user45192

  Hi guys, I received alot of event logged in the event viewer with this message. I notice is always the same user id which encounters this error. The user id is use by an application to access the database. However, this account does not exits on this server. How do I trace the services/program use by this user id which causes these error messages? Reason=Unknown user name or bad password&&User Name=&&Domain=&&Logon Type=3&&Logon Process=NtLmSsp&&Authentication Package=NTLM&&Workstation Name=&&Caller User Name=-&&Caller Domain=-&&Caller Logon ID=-&&Caller Process ID=-&&Transited Services=-&&Source Network Address=-&&Source Port=-&&User=SYSTEM&&ComputerName=

  Read the article

• Can send to individual users but not when they are in a global distribution list.

  - by Jake

  I am able to send email to individual users but when not when they are in a distribution group. When I do I get this report. The message could not be delivered because the recipient's destination email system is unknown or invalid. Please check the address and try again, or contact your system administrator to verify connectivity to the email system of the recipient. #5.3.1 However, like I said before I can select their name from the GAL and send mail that way. Their email address is exactly the same in both the GAL and distribution group. The only difference is these users have external email addresses. Windows Server 2003 Exchange Server 2003 Outlook 2007 and 2010.

  Read the article

• LPR command won't recognize CUPS printer

  - by Datapimp23

  I have a cups server with one shared printer configured on it. It prints test pages without problems. printername (Idle, Accepting Jobs, Shared) Description: desc Location: Driver: Zebra ZPL Label Printer (grayscale, 2-sided printing) Connection: socket://172.20.50.26 Defaults: job-sheets=none, none media=oe_w288h432_4x6in sides=one-sided This is the output from lpstat -t. it shows that the printer is idle and accepting requests admin@SERVER:~$ lpstat -t scheduler is running no system default destination device for printername: socket://172.20.50.26 printername accepting requests since Thu 26 Jan 2012 01:29:35 PM CET printer printername is idle. enabled since Thu 26 Jan 2012 01:29:35 PM CET Now when I want to send a printjob to it via an LPR command it won't recognize the printer /usr/bin/lpr -P printername test.pdf Result lpr: ttn_seg_zebra1: unknown printer What am I missing here ?

  Read the article

• HP Media Smart remote access

  - by Coov

  I just purchased this box for home backups for my pc's and mac's. Everything works great accept for the remote access part. I can RD into the machine locally but I can't get to it from outside of my network. I've enabled port forwarding on my router but it doesn't seem to matter. I checked with Qwest and they don't block these ports so I'm at a loss. I do have Vonage in front of my router but I've taken it out and it didn't make a difference. I suspect I've made an error with my router setup. I'm a programmer and I'm playing in the world of the unknown here. I'm lost. Any suggestions?

  Read the article

• xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory)

  - by mazgalici

  root@mazgalici:~# startx X.Org X Server 1.7.6 Release Date: 2010-03-17 X Protocol Version 11, Revision 0 Build Operating System: Linux 2.6.24-28-server i686 Ubuntu Current Operating System: Linux mazgalici 2.6.18-194.26.1.el5.028stab079.2PAE #1 SMP Fri Dec 17 19:34:22 MSK 2010 i686 Kernel command line: quiet Build Date: 10 November 2010 11:25:26AM xorg-server 2:1.7.6-2ubuntu7.4 (For technical support please see ) Current version of pixman: 0.16.4 Before reporting problems, check to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: "/var/log/Xorg.0.log", Time: Tue Jan 11 01:28:48 2011 (==) Using config directory: "/usr/lib/X11/xorg.conf.d" Fatal server error: xf86OpenConsole: Cannot open /dev/tty0 (No such file or directory) Please consult the The X.Org Foundation support at http://wiki.x.org for help. Please also check the log file at "/var/log/Xorg.0.log" for additional information. ddxSigGiveUp: Closing log

  Read the article

• USB keyboard not working under Windows 7 x64?

  - by Comboo

  I have two USB keyboards, one no-name cheap thing and an old Logitech. When I plug them in to my computer they pop up in Device Manager as an "Unknown device" and "USB-receiver", respectively. Both of them fail to install any drivers, neither automatically or through Windows Update. Both keyboards work perfectly on another computer I have with Windows Vista 32-bit. Can this be one of those cases where a device does not work in a 64-bit version of Windows? I doubt it though since I've never had that problem before with any device and I thought that basic things like keyboards would be kind of failsafe. I don't really know how to start debugging this issue. I've tried all the obvious, rebooting, changing the USB port, etc. Are there any generic x64 keyboard drivers you can use? Is there any way to find the manufacturer of the keyboard over USB? There is nothing written on it.

  Read the article

• How to extract .raw backup of Windows to a partition?

  - by JamerTheProgrammer

  I have a backup of a Windows 7 drive (virtualbox install) made in .raw format and I want to extract it to my empty partition ready for Windows. Im using OSX. Any ideas? I have tried this: sudo dd if=/Volumes/DATA/bootcamp.raw of=/dev/disk0s6 Which works fine but when I reboot (im on a hackintosh so im using the Chameleon boot loader) I get the normal Chameleon boot menu but with an unknown GPT partition (thats what its called) and If I select that it says: Missing Operating system. Is the MBR broken on that partition?

  Read the article

• How to determine the source for wakeup in hibernate

  - by Erik

  I have a big problem with my home theater PC that runs Windows 7 64Bit. Normally, I send that PC to hibernate every evening, but from time to time, it keeps waking up for no obvious reason, and stays on until I realize, which is sometimes half a day later :( I have already checked for Windows update, which is not set to automatical, since I prefer installing updates manually. When I look in the system event log, there is an entry called "Power Troubleshooter" which tells me that my system was reactivated at a specific time, but it also says: Source = Unknown, which is the most annoying part. So how can I actually figure out, which process reactivates the PC? Is it possible to set a group policy which forbidds applications or services from scheduling tasks that allow waking up from hibernate at all?

  Read the article

• Transferring DHCP using Windows Server Migration Tool - Why is Powershell is crashing on the import of the .mig file?

  - by Mike

  I am migrating DHCP from a windows server 2003R2 DC to a Windows Server 2008R2 DC I've followed this video and its predecessor (Installing Windows Server Migration Tools) http://technet.microsoft.com/en-us/video/migrating-dhcp-using-the-windows-server-2008-r2-migration-tools.aspx I went through everything smoothly until the last step. I have exported a .mig file with my DHCP configuration on the old 2003r2 server. I transferred this .mig file over to my 2008R2 server, when running the import command, it will appear to work for a minute or two and then I get a generic windows "Powershell has stopped working" error and I have to close the program. Under the problem details I see the following: FileVersionOfSystemManagementAutomation: 6.1.7600.16385 InnermostExceptionType: System.AccessViolationException OutermostExceptionType: System.AccessViolationException DeepestPowerShellFrame: unknown OS Version: 6.1.7600.2.0.0.272.7 LocaleID: 1033 Seems like there are permissions issues maybe? I am running powershell as an admin and am logged in to the server as a domain administrator. Any Ideas? Thanks

  Read the article

• getaddrinfo(3) failed

  - by user101289

  I'm trying to connect to a webservice using a PHP wrapper (which is using curl under the covers). On my local linux machine running PHP 5.3 it works perfectly. However, when I move to a remote server (also running PHP 5.3 on Linux) the call the the webservice URL returns: getaddrinfo(3) failed for http://server.host.com:8080/login I get a similar error from a ping on the remote host: ping: unknown host http://server.host.com:8080/login But when I issue a curl request from the command line, it returns the expected URL. Can anyone shed any light on this issue? Thanks!

  Read the article

• Windows share mounted then symlinked on LAMP server. Serves up html, but not images.

  - by Samuurai

  This has really got me befuddled... I've mounted a share, like this: //srv1/UserUploads /mount/UserUploads cifs rw,user,exec,uid=wwwrun,gid=www,username=shareuser,password=sharepw 0 0 I then have a symlink here: WEBSVR:/Web/htdocs/public_html # ls -l useruploads lrwxrwxrwx 1 wwwrun www 18 Dec 7 09:18 useruploads -> /mount/UserUploads Oddly, if I ls inside the mounted area, items appear with a capital S -rwxrwSrwx 1 wwwrun www 4077 Dec 30 14:54 prop9.jpg -rwxrwSrwx 1 wwwrun www 4 Jan 12 15:57 test.html And if I bring up test.html in a browser, it works fine, but if I go to prop9.jpg, chrome gives me this error: This web page is not available. The web page at http://10.1.64.100/useruploads/webteam/help2let/prop6-1.jpg might be temporarily down or it may have moved permanently to a new web address. More information on this error Below is the original error message Error 100 (net::ERR_CONNECTION_CLOSED): Unknown error. Has anyone seen this behaviour where the binary files (images) arent displayed, but html/text is?

  Read the article

• upstart not working

  - by dorelal

  I saved the following file at /etc/init/nodejs.conf description "node.js server" author "dorelal" start on startup stop on shutdown script # We found $HOME is needed. Without it, we ran into problems export HOME="/root" exec /usr/local/bin/node /home/dorelal/nodejs.js 2>&1 >> /var/log/node.log end script Then I tried to start the server > sudo initctl start nodejs initctl: Unknown job: nodejs Ubuntu information > cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=9.10 DISTRIB_CODENAME=karmic DISTRIB_DESCRIPTION="Ubuntu 9.10" What do I need to do to start the server using upstart.

  Read the article

• Google Chrome and kerberos authentication against Apache

  - by Lars

  I've managed to get kerberos authentication to work now with Apache and Likewise Open but so far, Google Chrome doesn't seem to play fair. Unless I start it with chrome.exe --auth-server-whitelist="*company.com" it does only pop-up a login window but will not accept any credentials at all. As far as I know, the --auth-server-whitelist option should only be used when trying to get Single-Sign-On (SSO) to work, but if you are fine with a log-in window it should work directly out of the box, but so far it doesn't. This is the error I get in the apache logs. [Tue Dec 13 08:49:04 2011] [error] [client 192.168.1.15] failed to verify krb5 credentials: Unknown code krb5 7

  Read the article

• Lost Page Write I/O Errors on CentOS LVM setup

  - by Gregg Leventhal

  I have a CentOS 6 box with LVM setup and one of the PVs is a USB disk (I know). One of them is getting the error: Oct 30 10:57:07 alpha01 kernel: lost page write due to I/O error on dm-3 Oct 30 10:57:07 alpha01 kernel: Buffer I/O error on device dm-3, logical block 4 Which is causing problems with all of the LVs on it. pvs shows the PV as unknown device. I can ls to the logical volumes and they show up in lvdisplay, but first I get a bunch of IO errors. I made sure the cables are secure between the USB drive. What should I do to get this back up and running for the meanwhile? Should I unmount each LV and run an fsck.ext4 on each one like fsck.ext4 -y /dev/vg1/lv_logvolname ?

  Read the article

• Why does my win7 back ground and theme settings reset to default after every reboot ?

  - by JubJub

  I have the new ASUS G73. Everything is perfect, but for unknown reasons to me after customizing the background and theme colors, rebooting resets all these back to default (the theme that originally came with the laptop) Is there a way to stop this madness? Is there some kind of configuration reset app that runs on start up for ASUS computers? This is my first ASUS so I don't know what to expect with the factory bloatware. No, I don't feel like re-installing bare-bones windows just to get rid of the bloatware. Everything works fine except for this one little thing :( Sniff.

  Read the article

• IIS6 + PHP + FastCGI 500 Errors - Where to start looking?

  - by Bertvan

  I've set up IIS6 with FastCGI to use php-cgi.exe. I have some php websites by external parties, that I'm trying to run in a test environment. One of the websites just plain gives me a FastCGI Error Page. Question: Is there some way to enable logging somewhere so that I can get a bit more information on this problem? I have looked in Eventlog IIS Website log (c:\windows\system32\Logfiles) PHP log But no results, except the IIS Website log mentions a return of a 500 page. Question: Is there any other way to debug/check where things might be going wrong? Here is what the page looks like: FastCGI Error The FastCGI Handler was unable to process the request. Error Details: The FastCGI process exited unexpectedly Error Number: -1073741571 (0xc00000fd). Error Description: Unknown Error HTTP Error 500 - Server Error. Internet Information Services (IIS)

  Read the article

• Problems installing Windows 7 on Dell Inspiron 531 desktop

  - by wardedmocha

  Hello. I am having a problem installing Windows 7 on a Dell Inspiron 531 desktop. I got the setup to run and now it was trying to restart and now the computer just beeps. Two times a second, one right after the other. The beep is not like a key is being held down. And the computer isn't showing anything on the screen. edit: this is a computer I am trying to fix there where two blue screen errors that I know of. the first one had something to do with a display driver the second one was unknown

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

• My NTFS Partition keeps becoming "unusable" on Ubuntu, Any Ideas?

  - by gopherman

  I just purchased a new 2TB Drive External Seagate, My main system uses both Windows and Ubuntu So I am pretty much stuck with keeping my drive as NTFS. I have done this without any problems before but since I got this new drive I have been having issues. When I first load up Ubuntu the drive mounts and runs fine, after an unspecified amount of time i start getting Input/Output errors when accessing the drive. When I goto the Disk Utility I get a message stating the drive is "Unknown or Unused", If I disconnect and reconnect the drive or reboot everything is fine again. There's no errors coming up with S.M.A.R.T and it seems to work fine while under windows. Any thoughts?

  Read the article

< Previous Page | 83 84 85 86 87 88 89 90 91 92 93 94  | Next Page >