Search Results

Search found 27890 results on 1116 pages for 'oracle retail documentation team'.

Page 879/1116 | < Previous Page | 875 876 877 878 879 880 881 882 883 884 885 886  | Next Page >

• Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

  - by Schof

  This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

  Read the article

• The MsC gray zone: How to deal with the "too unexperienced on engineering/too under-qualified for research" situation?

  - by Hunter2

  Last year I've got a MsC degree on CS. On the beginning of the MsC course, I was keen on moving on with research and go for a PhD. However, as the months passed, I started to feel the urge to write software that people would, well, actually use. The programming bug had bitten me, again. So, I decided that before deciding on getting a PhD degree, I would spend some time on the "real world", working as a software developer. Sadly, most companies here in Brazil are "services" companies that seem to be stuck on the 80s when it comes to software development. I have to fend off pushy managers, less-than-competent coworkers and outrageous software requirements (why does everyone seem to need a 50k Oracle license and a behemoth Websphere AS for their CRUD applications?) on a daily basis, and even though I still love software development, the situation is starting to touch a nerve. And, mind you, I'm already lucky for getting a job at a place that isn't a plain software sweatshop. Sure, there are better places around here or I could always try my luck abroad, but then I hit the proverbial brick wall: Sorry, you're too unexperienced as a developer and too under-qualified as a researcher I've already heard this, and variations of that, multiple times. Research position recruiters look for die-hard, publication-ridden, rockstar PhDs, while development position recruiters look for die-hard, experience-ridden, rockstar programmers. To most, my MsC degree seems like a minor bump on my CV (and an outright waste of time for some). Applying for abroad positions is even harder, since the employer would have to deal of the hassle of a VISA process, which I understand that, sometimes, is too much. Now I'm feeling I've reached a dead-end. I'm certain that development (and not research) is my thing, so should I just dismiss my MsC (or play it as a "trump card") and play the "big fish on a small pond" role while I gather some experience and contribute on some open-source projects as a plus? Is there a better way to handle this?

  Read the article

• Looking for a small, light scene graph style abstraction lib for shader based OpenGL

  - by Pris

  I'm looking for a 'lean and mean' c/c++ scene graph library for OpenGL that doesn't use any deprecated functionality. It should be cross platform (strictly speaking I just dev on Linux so no love lost if it doesn't work on Windows), and it should be possible to deploy to mobile targets (ie OpenGLES2, and no crazy mandatory dependencies that wouldn't port well to modern mobile frameworks like iOS, Android, etc), with a license that's compatible with closed source software (LGPL or more liberal). Specific nice-to-haves would be: Cameras and Viewers (trackball, fly-by, etc) Object transform hierarchies (if B is a child of A, and you move A, B has the same transform applied to it) Simple animation Scene optimization (frustum culling, use VBOs, minimize state changes, etc) Text I've played around with OpenSceneGraph a lot and it's pretty amazing for fixed function pipeline stuff, but I've had a few of problems using it with the programmable pipeline and after going through their mailing list, it seems several people have had similar issues (going back years). Kitware's VES looks neat (http://www.vtk.org/Wiki/VES), but VES + VTK is pretty heavy. VTK is also typically for analyzing scientific data and I've read that it's not that appropriate for a general use case (not that great at rendering a lot of objects on scene,etc) I'm currently looking at VisualizationLibrary (http://www.visualizationlibrary.org/documentation/pag_gallery.html) which looks like it offers some of the functionality I'd like, but it doesn't explicitly support mobile targets. Other solutions like Ogre, Horde3D, Irrlicht, etc tend to be full on game engines and that's not really what I'm looking for. I'd like some suggestions for other libraries that I may have missed... please note I'm not willing to roll my own solution from scratch.

  Read the article

• 48hrs in Cambridge.

  - by Fatherjack

  In just over 2 weeks something pretty big in the SQL Server Community in the UK is taking place. We are going to witness the first SQL Saturday on these shores. The event is running in Cambridge, the home of the SQL Cambs user group and the chapter leader there (Mark Broadbent) is the lead on the SQL Saturday event too. Mark and his team are making final preparations and looking forward to this event getting started with the Pre-Con day on Friday 7th Sept. They have 3 great sessions from Buck Woody, Jen Stirrup and Mark Rasmussen for those lucky enough to be able to attend on the Friday. There are over 30 speakers providing 4 tracks of sessions on the Saturday so there will be plenty to interest and inform anyone working with SQL Server, take a look at all the sessions on the schedule. In addition to all of this you will be able to spend some quality time talking to all the other attendees, sponsors and PASS representatives to make the most of your time there. If you haven’t registered yet then head over to http://sqlcambs.org.uk/ and get your name down to attend this milestone event.

  Read the article

• Lots of static/crackling noises after ALSA HDA DKMS installation

  - by MartinB

  I am using a Samsung Chronos 7 laptop with the following sound setup: $ head -n 1 /proc/asound/card0/codec* ==> /proc/asound/card0/codec#0 <== Codec: Realtek ALC269VC ==> /proc/asound/card0/codec#3 <== Codec: Intel CougarPoint HDMI With the stock ALSA that comes with Ubuntu 12.04, I do not get any sound out of the headphones when I plug them into the headphone jack. After plugging the headphones in, I have to manually use Alsamixer to increase the volume, so that the headphones become usable. I have been told that this issue is due to my sound chip not being supported in the ALSA version that ships with Precise. A similar question at AskUbuntu and the Ubuntu Community Documentation point me to the ALSA DKMS installation. After installing the dkms module of yesterday's ALSA snapshot and rebooting, the headphone issue is indeed solved. I can now plug my headphones into the jack and instantly have sound on them. However, now I have tons of static noises and crackling when playing sound in VLC player or Skype (Firefox HTML5 playback seems to be fine, unless a Skype sound interferes with it). Is there a fix for this? I tried adding the Alsa PPA and installing the latest ALSA package proper, but that didn't have any effect, only the Alsa DKMS package seems to solve the headphone issue.

  Read the article

• Dual monitors, screen resolution, xorg.conf.d

  - by Flase

  I do a lot of RTFM but this one has got me stuck. I have Ubuntu Studio 12.04 Precise Pangolin with XFCE as its default desktop. My old HIS ATI Radeon 9250 graphics card was adding red crud across the screen with the generic driver, but downloading the proprietary "fglrx" driver makes it work cleanly. The trouble is the Catalyst control centre refuses to recognise my old card so I must do some manual configuring to make sure both the DVI and VGA monitors are capable of the correct screen resolution (both 1280x1024) and a dual display. It used to be easier to just edit the existing xorg.conf file and add another resolution and so forth, but now there are automatic xorg.conf.d directories (more than one) with scant documentation. Creating a generic xorg.conf with a terminal command creates every setting imaginable. What I want to do is create the simplest conf file which just tells the system the following: My VGA monitor can do 1280x1024 60Hz The two monitors together may be 2560x1024 width The VGA monitor on the right I might need to specify Xinerama if it's needed Thank you. I don't think I need to bore you with log files, but please ask for further info. Mike

  Read the article

• CodePlex learns to talk to other services!

  CodePlex is now able to talk to other services! For example, if you want CodePlex to tell Trello to update cards on your Trello board, it can do it. Or if you want CodePlex to notify your Campfire chat room when updates are pushed, it can do that too. To start off, we are going to be adding support for the following services: Campfire – Notify a Campfire chat room when commits occur HipChat – Notify a HipChat chat room when commits occur Trello – Add commit summaries to Trello cards by referencing those cards in commit messages Twitter – Notify your Twitter followers when updates are pushed to your project In addition, we will continue to support our existing integrations with Windows Azure – Continuously deploy to Windows Azure on pushes (For Git and Hg projects) AppHarbor – Continuously deploy to AppHarbor on pushes To set up these integrations for your project, navigate to the project settings page as a project coordinator, and click on the services section as seen below:   While we are starting with these six services, the infrastructure is now in place to allow us to quickly roll out new integrations. We would love to hear which services and integrations you would like to see most on our suggestions page. We realize that there are some services and URLs that only make sense for your project to send notifications to. To support this scenario, we plan to add generic web hooks in the near future. Have ideas on how to improve CodePlex? Please visit our suggestions page! Vote for existing ideas or submit a new one. As always you can reach out to the CodePlex team on Twitter @codeplex or reach me directly @Rick_Marron.    

  Read the article

• PowerShell a constant in a changing world

  - by Rob Addis

  I've been programming for about 20 years now some of my friends have been at it for over 30. I have read many, many manuals and yes it's not my favourite past time. So 10 years ago I made a promise to myself to try and only learn about products which have long life times. I immediately gave up programming GUIs and concentrated on back end development as I decided that these products (Oracle, MQ Series, SQL Server, BizTalk and later WCF, WF) have longer life times and smaller incremental changes than front end products.10 years ago I had no idea how good a decision that would turn out to be. There have been so many different Microsoft products for the front end in that time; multiple versions of Windows Forms, FrontPage, Html, Javascript, ASP.net, Silverlight, SharePoint, WPF and now hopefully a stayer Metro.I remember being at a Microsoft conference in 2006 when Martin Fowler told a crowd of developers (I'm paraphrasing) "If you don't like change then you're in the wrong business!". Well I've been in the business for 20 years and yes I'm a little resistant to change. I like my investment in reading manuals and getting certified to be time well spent!Over the last 2 years I have been writing A LOT of PowerShell script, I think there is a good chance this product will still be around and be used for new development in 10 years, learning it is a good investment.

  Read the article

• An ideal way to decode JSON documents in C?

  - by AzizAG

  Assuming I have an API to consume that uses JSON as a data transmission method, what is an ideal way to decode the JSON returned by each API resource? For example, in Java I'd create a class for each API resource then initiate an object of that class and consume data from it. for example: class UserJson extends JsonParser { public function UserJson(String document) { /*Initial document parsing goes here...*/ } //A bunch of getter methods . . . . } The probably do something like this: UserJson userJson = new UserJson(jsonString);//Initial parsing goes in the constructor String username = userJson.getName();//Parse JSON name property then return it as a String. Or when using a programming language with associative arrays(i.e., hash table) the decoding process doesn't require creating a class: (PHP) $userJson = json_decode($jsonString);//Decode JSON as key=>value $username = $userJson['name']; But, when I'm programming in procedural programming languages (C), I can't go with either method, since C is neither OOP nor supports associative arrays(by default, at least). What is the "correct" method of parsing pre-defined JSON strings(i.e., JSON documents specified by the API provider via examples or documentation)? The method I'm currently using is creating a file for each API resource to parse, the problem with this method is that it's basically a lousy version of the OOP method, as it looks exactly like the OOP method but doesn't provide any OOP benefits(e.g., can't pass an object of the parser, etc.). I've been thinking about encapsulating each API resource parser file in a publicly accessed structure(pointing all functions/publicly usable variables to the structure) then accessing the parser file code from within the structure(parser.parse(), parser.getName(), etc.). As this way looks a bit better than the my current method, it still just a rip off the OOP way, isn't it? Any suggestions for methods to parse JSON documents on procedural programming lanauges? Any comments on the methods I'm currently using(either 3 of them)?

  Read the article

• Is a big name computer science degree worth the cost?

  - by Serplat

  I'm currently in High School and trying to look into what I want to do after I graduate. I know that I will be going to college, and that I want a degree in Computer Science, however, I'm not entirely sure where I want to go (I haven't started the application process yet). I already have built up a decent amount of experience in programming (over the summers I have been hired to program at a local university), and I'm pretty capable of teaching myself most of the material I've come across through either books or web documentation. I'm interested in whether it is worth it to get a degree from a major, big-name computer science university for $50,000 each year, as opposed to going to a local state school for only $20,000. For my Bachelor's degree alone, this would be $120,000 more than the state school. I've also heard that where you get your Bachelor's doesn't matter much if you plan to get a Master's degree. Many people recommend going somewhere like a state school for your Bachelor's, and then try to get into a more major school for your Master's. Has anybody found any truth in this? Basically, is going to a big name computer science school for a Bachelor's degree really worth the added expense?

  Read the article

• Update Google Sitemap for Mobile

  - by dimo414

  I have a series of utilities to generate Google sitemaps for my whole site. These files are massive, and slow to build. We want to start telling Google these pages are mobile-crawl-able too, by adding them to mobile sitemaps, but the documentation is unclear if I need to specify physically different files for my mobile URLs than for my normal ones. If this is my current sitemap: <?xml version="1.0" encoding="UTF-8" ?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9"> <url> <loc>http://mobile.example.com/article100.html</loc> </url> </urlset> Can I simply change it to: <?xml version="1.0" encoding="UTF-8" ?> <urlset xmlns="http://www.sitemaps.org/schemas/sitemap/0.9" xmlns:mobile="http://www.google.com/schemas/sitemap-mobile/1.0"> <url> <loc>http://mobile.example.com/article100.html</loc> <mobile:mobile/> </url> </urlset> Or do I need to create new files with the additional markup, alongside my existing files?

  Read the article

• How do you KISS?

  - by Conor

  The KISS principle is a highly quoted design mantra. The aim of this principle is to stamp out unnecessary complexity on a project. This is a good thing, saving time, energy and money. It can lead to a relatively stress free implementation and a simple, elegant, maintainable end product. A lot of discussion on KISS provides mechanisms to simplify requirements, design and implementation. Things that spring to mind include: avoid scope creep; simple obvious design and code; minimal run-time dependencies; refactoring to maintain simplicity; etc. However there are a lot of implicit things that we do to KISS. Examples: small team sizes; minimal management layers; tidy desk; mastery of a single IDE; clear concise error messages; scripts to automate/encapsulate tasks; etc Why KISS practices do you apply? How have they been of benefit? I'm especially interested in non-obvious practices.

  Read the article

• Recasting and Drawing in SDL

  - by user1078123

  I have some code that essentially draws a column on the screen of a wall in a raycasting-type 3d engine. I am trying to optimize it, as it takes about 10 milliseconds do draw a million pixels using this, and the vast majority of game time is spent in this loop. However, I don't quite understand what's occurring, particularly the recasting (I modified the "pixel manipulation" sample code from the SDL documentation). "canvas" is the surface I am drawing to, and "hello" is the surface containing the texture for the column. int c = (curcol)* canvas->format->BytesPerPixel; void *canvaspixels = canvas->pixels; Uint16 texpitch = hello->pitch; int lim = (drawheight +startdraw) * canvpitch +c + (int) canvaspixels; Uint8 *k = (Uint8 *)hello->pixels + (hit)* hello->format->BytesPerPixel; for (int j= (startdraw)*(canvpitch)+c + (int) canvaspixels; (j< lim); j+= canvpitch){ Uint8 *q = (Uint8 *) ((int(h))*(texpitch)+k); *(Uint32 *)j = *(Uint32 *)q; h += s; } We have void pointers (not sure how those are even represented), 8, 16, and 32 bit ints (h and s are floats), all being intermingled, and while it works, it is quite confusing.

  Read the article

• Is it bad to be the only person supporting software you have developed?

  - by trpt4him

  My employer has a need for a web-based application to manage and share data within the department, with approximately 50-75 possible users. I feel I have the ability to write it for them. I would likely use Python/Django with a MySQL database, so it would be open source. However, I'm the only IT person in my department (our larger organization has a separate IT support staff with which I often work, but not for web development). I want to develop this application, but if I leave in 1-2 years, and someone else has to come in after me and support it, will this be seen as a bad decision? This is assuming all the obvious points -- I will write documentation, I will comment my code, and I will strive to follow good application design principles. But will that be enough? In principle, is it acceptable for one person to develop and support an entire web application? Is this a "do first, then show and ask" kind of situation, or should I be certain it will be adopted by everyone involved first?

  Read the article

• Are Intel compilers really better than the Microsoft ones?

  - by Rocket Surgeon

  Years ago, I was surprised when I discovered that Intel sells Visual Studio compatible compilers. I tried it in particular for C/C++ as well as fantastic diagnostic tools. But the code was simply not that computationally intensive to notice the difference. The only impression was: did Intel really do it for me just now, wow, amazing tools with nanoseconds resolution, unbelievable. But the trial ended and the team never seriously considered a purchase. From your experience, if license cost does not matter, which vendor is the winner? It is not a broad or vague question or attemt to spark a holy war. This sort of question is about two very visible tools. Nobody likes when tools have any mysteries or surprises. And choices between best and best are always the pain. I also understand the grass is always greener argument. I want to hear all "what ifs" stories. What if Intel just locally optimizes it for the chip stepping of the month, and not every hardware target will actually work as well as Microsoft compiled? What if AMD hardware is the target and everything will slow down for no reason? Or on the other hand, what if Intel's hardware has so many unnoticable opportunities, that Microsoft compiler writers are too slow to adopt and never implement it in the compiler? What if both are the same exactly, actually a single codebase just wrapped into two different boxes and licensed to both vendors by some third-party shop? And so on. But someone knows some answers.

  Read the article

• Location of development solutions on disk - Common or upto the individual

  - by dreza

  In our team meeting today a senior member brought up the proposal that we should be having a common location/structure for our development solutions. A couple of his points were: Making it common meant when talking about projects and emailing stuff everyone is on the same wavelength and knows where to look. If there is ever the need to hard code a location path then it will work across all developers pc's. He had a more few points to back up his suggestion but I unfortunately got distracted during the discussion and so didn't hear all of them. I have no issue with the idea and can see it's merits but I was wondering if it is common or even recommended that all developers place their code in the same folder structure. Or do developers like to have the flexibility of location solutions where-ever they want? We currently use SVN for our version control. In this case his recommendation was to place all code in: c:\Work\Development\<Customer>\<project>\Code\<solution>\ the code I guess actual path is irrelevant for this question but added for completeness.

  Read the article

• Apache DVB http video Streaming bandwidth or priority problem

  - by igino manfre'

  I'm streaming few precompressed DVB videos from cloud. The streams are generated from VLC on "impossible" ports (such as 64085, 64086 etc) reverse proxed by Apache on port 80 and 8080. All the generated streams are listed in "http://95.110.164.61/indexv.html". From an ADSL connection with enough downlink bandwidth, recalling the stream generated by VLC (such as "http://95.110.164.61:64087/mpg2_6.4") it flows fluently. Recalling the same stream proxed by Apache ("http://95.110.164.61/mpg2_6.4") the stream stops and goes. The only situation in which the Apache proxed streams flow regularly is from a site connected through 64 Mbps warranted bandwith with RTT to the server less than 10 mseconds. Please note that streams below 2 Mbps are fluently proxed. The system is a single core xeon with windows 2008 R2 on 4 GB of RAM with 1 Gbps of network bandwidth. The drain of computational and bandwidth resources is negligeable, the RAM usage always lower than 50%. On the system I run many VLC streamers. Any of them drains a variable amount of RAM (from about 25 to 70 MB). On the contrary the couple of httpd.exe processes drain no more than 7 MB. Using Wireshark (on the server) I see that VLC directy send to the client much more packets than Apache, and the stream is framgmented on many frames. I'm not a programmer, a newby of Apache. Can anyone please address me to a specific portion of the Apache's huge documentation? Thank you. igino

  Read the article

• 12.04 disabling wireless via dbus does not work

  - by FlabbergastedPickle

  I am using a proprietary rt3652sta driver for my wireless card. It appears as a ra0 device on the 64-bit Ubuntu 12.04. According to the online documentation the following used to work definitely up to 10.04. dbus-send --system --type=method_call --dest=org.freedesktop.NetworkManager /org/freedesktop/NetworkManager org.freedesktop.DBus.Properties.Set string:org.freedesktop.NetworkManager string:WirelessEnabled variant:boolean:false This however has no effect on the aforesaid wireless card in 12.04. Also, rfkill does not work as it does not even list the wireless button (again, likely due to the wireless driver being proprietary): rfkill list It only lists the hci0 (bluetooth) one and one can block/unblock it accordingly but this has no effect on the wifi. ifup/down also does not work (AFAICT)... And this leaves me with disabling wireless through the network manager applet. However, trying to do so via dbus appears not to work and yet I would like to automate it via a script. Any ideas how I could find out the proper dbus structure for the call? Is this even possible in Ubuntu 12.04?

  Read the article

• Thoughts on type aliases/synonyms?

  - by Rei Miyasaka

  I'm going to try my best to frame this question in a way that doesn't result in a language war or list, because I think there could be a good, technical answer to this question. Different languages support type aliases to varying degrees. C# allows type aliases to be declared at the beginning of each code file, and they're valid only throughout that file. Languages like ML/Haskell use type aliases probably as much as they use type definitions. C/C++ are sort of a Wild West, with typedef and #define often being used seemingly interchangeably to alias types. The upsides of type aliasing don't invoke too much dispute: It makes it convenient to define composite types that are described naturally by the language, e.g. type Coordinate = float * float or type String = [Char]. Long names can be shortened: using DSBA = System.Diagnostics.DebuggerStepBoundaryAttribute. In languages like ML or Haskell, where function parameters often don't have names, type aliases provide a semblance of self-documentation. The downside is a bit more iffy: aliases can proliferate, making it difficult to read and understand code or to learn a platform. The Win32 API is a good example, with its DWORD = int and its HINSTANCE = HANDLE = void* and its LPHANDLE = HANDLE FAR* and such. In all of these cases it hardly makes any sense to distinguish between a HANDLE and a void pointer or a DWORD and an integer etc.. Setting aside the philosophical debate of whether a king should give complete freedom to their subjects and let them be responsible for themselves or whether they should have all of their questionable actions intervened, could there be a happy medium that would allow the benefits of type aliasing while mitigating the risk of its abuse? As an example, the issue of long names can be solved by good autocomplete features. Visual Studio 2010 for instance will alllow you to type DSBA in order to refer Intellisense to System.Diagnostics.DebuggerStepBoundaryAttribute. Could there be other features that would provide the other benefits of type aliasing more safely?

  Read the article

• Seeking for a better solution to restrict access in GRUB2 menu

  - by LiveWireBT

  I just read that in certain situations you should also protect access to your GRUB2 menu by setting a password and may be refining acces by adding --unrestricted or --users as arguments to menuentries und submenus. I read the corresponding pages in the Ubuntu Community Documentation and the Arch Wiki. So, I created /etc/grub.d/01_security, stored usernames and passwords in there, made the file executable and ran update-grub. This is working as intended, every action in the menu prompts for username and password, but I also want to modify the automatically generated entries to either restrict them to certain users (via --users) or make them available for everyone, but not editable by everyone (via --unrestricted). I was able to find the proper lines in 10_linux and edit them accordingly, however I'd love to see an easier solution. Perhaps an option like GRUB_DISABLE_RECOVERY="true" or GRUB_DISABLE_OS_PROBER=true in /etc/default/grub for easy (re)configuration (for linux and os-prober generated entries). Here's a diff from my 13.10 installation: $ diff /etc/grub.d/10_linux /etc/grub.d/10_linux_bak 123c123 < echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} --unrestriced \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^$ --- > echo "menuentry '$(echo "$title" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-$version-$type-$boot_device_id' {" | sed "s/^/$submenu_inde$ 125c125 < echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} --unrestricted \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_$ --- > echo "menuentry '$(echo "$os" | grub_quote)' ${CLASS} \$menuentry_id_option 'gnulinux-simple-$boot_device_id' {" | sed "s/^/$submenu_indentation/" 323c323 < echo "submenu --unrestricted '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_$ --- > echo "submenu '$(gettext_printf "Advanced options for %s" "${OS}" | grub_quote)' \$menuentry_id_option 'gnulinux-advanced-$boot_device_id' {" tl;dr: I'd love the see a simple solution for GRUB2 entries that cannot be modified without a password or are limited to certain users. (Yes, GRUB_DISABLE_RECOVERY="true" is active.)

  Read the article

• How to REALLY start thinking in terms of objects?

  - by Mr Grieves

  I work with a team of developers who all have several years of experience with languages such as C# and Java. Most of them are young enough to have been shown OOP as a standard way to develop software in university and are very comfortable with concepts such as inheritance, abstraction, encapsulation and polymorphism. Yet, many of them, and I have to include myself, still tend to create classes which are meant to be used in a very functional fashion. The resulting software is often several smaller classes which correctly represent business objects which get passed through larger classes which only supply ways to modify and use those objects (functions). Large complex difficult-to-maintain classes named Manager are usually the result of such behaviour. I can see two theoretical reasons why people might write this type of code: It's easy to start thinking of everything in terms of the database Deep down, for me, a computer handling a web request feels more like a functional operation than an object oriented operation when you think about Request Handlers, Threads, Processes, CPU Cores and CPU operations... I want source code which is easy to read and easy to modify. I have seen excellent examples of OO code which meet these objectives. How can I start writing code like this? How I can I really start thinking in an object oriented fashion? How can I share such a mentality with my colleagues?

  Read the article

• Antenna Aligner part 2: Finding the right direction

  - by Chris George

  Last time I managed to get "my first app(tm)" built, published and running on my iPhone. This was really cool, a piece of my code running on my very own device. Ok, so I'm easily pleased! The next challenge was actually trying to determine what it was I wanted this app to do, and how to do it. Reverting back to good old paper and pen, I started sketching out designs for the app. I knew I wanted it to get a list of transmitters, then clicking on a transmitter would display a compass type view, with an arrow pointing the right way. I figured there would not be much point in continuing until I know I could do the graphical part of the project, i.e. the rotating compass, so armed with that reasoning (plus the fact I just wanted to get on and code!), I once again dived into visual studio. Using my friend (google) I found some example code for getting the compass data from the phone using the PhoneGap framework. // onSuccess: Get the current heading // function onSuccess(heading) {    alert('Heading: ' + heading); } navigator.compass.getCurrentHeading(onSuccess, onError); Using the ripple mobile emulator this showed that it was successfully getting the compass heading. But it didn't work when uploaded to my phone. It turns out that the examples I had been looking at were for PhoneGap 1.0, and Nomad uses PhoneGap 1.4.1. In 1.4.1, getCurrentHeading provides a compass object to onSuccess, not just a numeric value, so the code now looks like // onSuccess: Get the current magnetic heading // function onSuccess(heading) {    alert('Heading: ' + heading.magneticHeading); }; navigator.compass.getCurrentHeading(onSuccess, onError); So the lesson learnt from this... read the documentation for the version you are actually using! This does, however, lead to compatibility problems with ripple as it only supports 1.0 which is a real pain. I hope that the ripple system is updated sometime soon.

  Read the article

• How can you achieve and maintain flow while pair programming?

  - by bizso09

  Flow is a concept introduced by Mihaly Csikszentmihalyi; in short, it means to get into the "zone". You feel immersed in your task, focused; the task can be difficult but challenging at the same time. When people achieve flow their productivity shoots up. Programming requires a great deal of mental focus because we often need to juggle several things in our minds at once. Many like to work in a quiet environment where they can direct their full attention to the task. If they are interrupted, it may take several minutes or even hours to get back into flow. I understand there's a practice in agile development and extreme programming called pair programming. It means you put the whole software development team in one room so that communication is seamless. You do write code with your pair because this way you get instant code reviews and fewer bugs get through. I've always had problems achieving flow while doing pair programming because of constant interruptions. I'm thinking deep about an issue then all of sudden someone asks me a question from another pair. My train of thought is lost. How can you achieve and maintain flow while pair programming?

  Read the article

• Failed Project: When to call it?

  - by Dan Ray

  A few months ago my company found itself with its hands around a white-hot emergency of a project, and my entire team of six pulled basically a five week "crunch week". In the 48 hours before go-live, I worked 41 of them, two back to back all-nighters. Deep in the middle of that, I posted what has been my most successful question to date. During all that time there was never any talk of "failure". It was always "get it done, regardless of the pain." Now that the thing is over and we as an organization have had some time to sit back and take stock of what we learned, one question has occurred to me. I can't say I've ever taken part in a project that I'd say had "failed". Plenty that were late or over budget, some disastrously so, but I've always ended up delivering SOMETHING. Yet I hear about "failed IT projects" all the time. I'm wondering about people's experience with that. What were the parameters that defined "failure"? What was the context? In our case, we are a software shop with external clients. Does a project that's internal to a large corporation have more space to "fail"? When do you make that call? What happens when you do? I'm not at all convinced that doing what we did is a smart business move. It wasn't my call (I'm just a code monkey) but I'm wondering if it might have been better to cut our losses, say we're not delivering, and move on. I don't just say that due to the sting of the long hours--the company royally lost its shirt on the project, plus the intangible costs to the company in terms of employee morale and loyalty were large. Factor that against the PR hit of failing to deliver a high profile project like this one was... and I don't know what the right answer is.

  Read the article

• Are R&D mini-projects a good activity for interns?

  - by dukeofgaming

  I'm going to be in charge of hiring some interns for our software department soon (automotive infotainment systems) and I'm designing an internship program. The main productive activity "menu" I'm planning for them consists of: Verification testing Writing Unit Tests (automated, with an xUnit-compliant framework [several languages in our projects]) Documenting Code Updating wiki Updating diagrams & design docs Helping with low priority tickets (supervised/mentored) Hunting down & cleaning compiler/run-time warnings Refactoring/cleaning code against our coding standards But I also have this idea that having them do small R&D projects would be good to test their talent and get them to have fun. These mini-projects would be: Experimental implementations & optimizations Proof of concept implementations for new technologies Small papers (~2-5 pages) doing formal research on the previous two points Apps (from a mini-project pool) These kinds of projects would be pre-defined and very concrete, although new ideas from the interns themselves would be very welcome. Even if a project is too big or is abandoned, the idea would also be to lay the ground work so they can be retaken by another intern or intern team. While I think this is good in concept, I don't know if it could be good in practice, as obviously this would diminish their productivity on "real work" (work with immediate value to the company), but I think it could help bring aboard very bright people and get them to want to stay in the future (which, I think, is the end goal for any internship program). My question here is if these activities are too open ended or difficult for the average intern to accomplish and if R&D is an efficient use of an interns time or if it makes more sense for to assign project work to interns instead.

  Read the article

< Previous Page | 875 876 877 878 879 880 881 882 883 884 885 886  | Next Page >