Search Results

Search found 2589 results on 104 pages for 'dell powerconnect'.

Page 88/104 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• System in low graphics, deleted linux, grub rescue, can't access windows

  - by First timer

  So I'm pretty new to Ubuntu but I managed to install it with no big problems on both my desktop and netbook. When I installed it on my brother's netbook everything went horribly wrong and now I fear the system is close to beyond repair. The problem was first that it said it did not have any space left (seemed ridiculous since it had a lot). Then Ubuntu began booting into a "System is running in low graphics mode error" which I then tried to fix, using all the tips I could find in here but nothing helped. I think the graphics error and lack of space might have been related but I can't be sure. Finally I gave up repairing Ubuntu and went for a reinstall. Shouldn't have done that! I read that I should simply open Ubuntu through a live usb and choose GParted to delete the Linux partitions so I did and rebooted accordingly. Next, I was to install Ubuntu but now I am only given the option to wipe the whole disk for Ubuntu, not install along with windows 7. If I access GParted I can still see the ntfs partitions that hold windows 7 (there are 2: one labeled RECOVERY and another labeled OS and boot) so why can't I access them? Btw. the OS and boot has a little red mark with a warning that 1 cluster is referenced to multiple times, don't know what that means. If I boot without the live usb I am sent directly into a grub rescue "black screen of the computer will follow no orders". Please, I know that the easiest might be to simply wipe the whole thing clean but there are important files and programs on windows 7. Is there a way to just access windows? It is a dell inspiron 1018 mini netbook, so I have no cd input and no windows 7 installation cd.

  Read the article

• Random touchpad and keyboard freezes on new 10.10 installation

  - by ancaleth

  My touchpad and keyboard freeze up on my newly installed Ubuntu 10.10. I was using Ubuntu 10.4 via wubi before on this Laptop where this problem never occurred. (I did not migrate wubi or upgrade to 10.10, it's a fresh start. 64-bit on Dell Studio, plenty of RAM, plenty of free space on partition etc.) I can't say there is a pattern yet, once it happened during the download of packages with the Update Manager, once it was just using Firefox, no other program running. I was forced to shut down manually. In between these crashes the laptop was booted once, updates were installed etc., firefox was used and there weren't any problems. Both crashes should be in the attached kern.log and I noticed there were some error problems before the last crash (at the end, obviously). It seems the wireless was experiencing problems. This wasn't noticed on the user end, since the touchpad + keyboard were already frozen. kern.log: http://paste.ubuntu.com/552617/ How can the freezes be fixed?

  Read the article

• loss of sound in ubuntu 12.04

  - by Leo Simon

  I'm running Linux E6520 3.2.0-56-generic #86-Ubuntu SMP Wed Oct 23 09:20:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux on a Dell Latitude E6530. (This is a new machine; have run the same version of linux on an older machine for a year, without this happening.) I've been losing sound regularly, though have not been able to isolate the trigger for this. I've scoured the web on this subject, in particular https://help.ubuntu.com/community/SoundTroubleshootingProcedure and Audio stopped working suddenly in 12.04 Nothing from the first site seemed to work for me. From the second site, I learned enough to be able to fix the problem when it happens, but nothing on the web has helped me figure out why the problem is happening in the first place. Patching together stuff from the web, and with some blind luck, I've found that the following steps seem to restore sound pulseaudio --kill pulseaudio --start pavucontrol -> output devices Click on the "Mute audio" icon, which mutes audio Click on the "Mute audio" icon, which unmutes audio. This obviously doesn't make sense: audio wasn't muted in the first place, but somehow, magically, toggling mute audio off and on seems to reset something. Can anybody suggest from this information why sound would be disappearing in the first place (it seems as though something is getting muted at the system level, but I don't know what)? a simpler (command-line/script) way of restoring sound, in particular, is it possible to reset pavucontrol from the commandline? Some other pieces of information that may be of use: The problem is clearly happening at the system level, since I've set up a clean new user, and this user has the same problems that I do. So user fixes like deleting the .pulse directory aren't (and don't) help. Sound works fine in Windows (dual-boot) so it's not a hardware problem Any help/suggestions on this would be most appreciated.

  Read the article

• How can I get my monitor's maximum resolution without the proprietary AMD graphic driver installed?

  - by Venki

  I am using Ubuntu 14.04. I have an AMD Radeon 5570 HD graphic card. Actually, the default open source REDWOOD drivers aren't allowing me to choose my monitor's maximum screen resolution(which is 1366 x 768). I just have two resolutions displayed which are 1024x768 and 800x600 . If I give the command : xrandr -s 1366x768 then the output is: Size 1366x768 not found in available modes So just for the sake of getting 1366x768 resolution I am forced to install the proprietary graphic driver that AMD gives me from its site. But if I install it(which itself is quite a problem-prone process), I undergo a lot of 'inconvenience'. Sometimes after an OS update, the driver crashes unity. Then I will have to uninstall that driver from a tty and google around for a solution. Also I encounter screen tearing problems occasionally. In addition I also cant see my login screen(See this question which states this particular problem). The main problem is AMD does not update its driver as quick as Ubuntu updates its OS. This is quite irritating. So, I want the maximum resolution(and performance) that my graphics card and monitor can give me without installing the 'problematic' proprietary graphic card driver that AMD gives. Is this possible? Suggestions please. Thanks in advance. PS :- More system specs details:- Intel i3 2100 processor AMD P8H61-M PLUS2 motherboard AMD Radeon 5570 HD graphic card DELL monitor (BTW, Thank you for reading through my elaborate description!)

  Read the article

• Ubuntu 12.10 won't display properly after kernel upgrade

  - by Daniel

  After updating a system today, Ubuntu's doesn't display correctly. The desktop now looks like this. It was working properly before. I had to use the terminal to run synaptic package manager, so I could view the update history; which is as follows: Commit Log for Wed Nov 7 11:50:36 2012 Upgraded the following packages: linux-image-generic (3.5.0.17.19) to 3.5.0.18.21 Installed the following packages: linux-image-3.5.0-18-generic (3.5.0-18.29) linux-image-extra-3.5.0-18-generic (3.5.0-18.29) Prior to this issue, the last active driver was nvidia-current-updates, version 304.51. I tried using the nvidia-current driver, version 304.51.really.304.43 instead, but the problem persists. I tried running nvidia-settings from terminal, so I could try configuring something, but the application informs that the Nvidia driver is not being used. As the x-swat repository has nothing for Quantal, I desperately used the unstable x-edgers repository & upgraded, but to no avail; so I purged it. The display should normally be full HD, but the only available resolutions now are 1024x768(4:3) and 800x600(4:3). The system is Dell XPS-L702X, with NVIDIA GeForce GT 555M, and 17" screen. How can I fix this problem? Update: I tried using the Nouveau third-party driver & this fixes the issue. However, if you have any idea how to get the Nvidia drivers working properly with the latest kernel, please share; as I've noticed some videos playing very slowly on the system, though I'm not sure exactly why.

  Read the article

• Freeze on Boot WindowsXP

  - by kyle

  Ok first off I know I should have Windows 7 but i don't Its a really old computer and i'm not sure if it can run the latest OS of ubuntu but i'm trying any whay so here are my specs or what i could have gathered from the computer(viruses are every where and most of the drivers are gone) Specs OS WindowsXP(it isn't letting me know which one that is blocked) Graphics card(can't access device manger it is blocked also) graphics card is 2003-2004 era though ram 512mb last time i checked USB(Drivers Gone) Wireless Card(Drivers Gone) Lan Card(Drivers Gone) Audio(Drivers Gone) CD Drive (it runs and works but i can't check its properties that's blocked to) Computer Dell Inspiron 600m Good News I have the Driver CD for everything Bad News I Don't have the OS CD I know the Computer is trash but i want to flash it anyway and just install linux(ubuntu) The second problem is it doesn't even want to load the CD all the way it is just stuck at the Ubuntu Screen with all the bubbles orange and if i resart it just does it again. any help would be nice. EDIT: okay i tried the first comment and it said i need a firmware file from http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware the firmware is b43/ucode5.fw, b43-open/ucode5.fw is there any other way of installing this firmware without being in the Ubuntu because what I have read is I need to be in Ubuntu to do this... Thanks for all the help you are giving me i have read your comments but i don't want to wait another two hours downloading that if i can get it working on this...

  Read the article

• Laptop power button not working

  - by DyP

  I have a (seemingly rather exotic) Dell Latitude XT2 notebook running Lubuntu 12.04, fresh install. Tried to get the power button to work as expected (opening lubuntu-logout, just as I think it was meant to be out-of-the box), but no success: power button does nothing but forced power-off on long press. Here some more information, please ask if something more could help: Power button is recognized as a device: xinput lists Power Button as a slave keyboard at /dev/input/event1, and I can run a tool to listen to that device and invoke some action (successfully). But using .config/openbox/lubuntu-rc.xml to assign some action to XF86ShutDown or XF86PowerOff does nothing. Works well for any key of the keyboard. xinput --test reports a keycode (key press, key release) of 124 when pressing & releasing the power button. xmodmap -pk lists 124 mapped to XF86PowerOff which seems correct to me (btw: is this the same as XF86ShutDown?) When assigning another keysymname to the 124 keycode, e.g. 'w', still nothing happens when pressing the power button (no window seems to receive a 'w'). Works well for any key on the keyboard. The outputs of xev for a press/release of the power button irritate me: MappingNotify event, serial 41, synthetic NO, window 0x0, request MappingKeyboard, first_keycode 8, count 248 FocusOut event, serial 41, synthetic NO, window 0x2a00001, mode NotifyGrab, detail NotifyAncestor FocusIn event, serial 41, synthetic NO, window 0x2a00001, mode NotifyUngrab, detail NotifyAncestor KeymapNotify event, serial 41, synthetic NO, window 0x0, keys: 93 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 (instead of 93, I also get different values) I might have missed something very basic since I'm not very familiar with both openbox/lubuntu and the X input system. Btw.: same goes for three other special buttons on my laptop..

  Read the article

• Disable touchpad tap to click on Oneiric ocelot

  - by AWE

  You've heard this a million times but the "tap to click" is a pain in the behind and I want to disable it. There is no touchpad in gpointing-device-settings and neither in mouse and touchpad in system settings. I've tried some commands in terminal but it's all crap. Dconf-editor doesn't react. How about solving this once and for all? xinput list: ? Virtual core pointer id=2 [master pointer (3)] ? ? Virtual core XTEST pointer id=4 [slave pointer (2)] ? ? PS/2 Generic Mouse id=13 [slave pointer (2)] ? Virtual core keyboard id=3 [master keyboard (2)] ? Virtual core XTEST keyboard id=5 [slave keyboard (3)] ? Power Button id=6 [slave keyboard (3)] ? Video Bus id=7 [slave keyboard (3)] ? Video Bus id=8 [slave keyboard (3)] ? Power Button id=9 [slave keyboard (3)] ? Sleep Button id=10 [slave keyboard (3)] ? Laptop_Integrated_Webcam_HD id=11 [slave keyboard (3)] ? AT Translated Set 2 keyboard id=12 [slave keyboard (3)] ? Dell WMI hotkeys id=14 [slave keyboard (3)]

  Read the article

• Sound not working with Ubuntu 12.10 clean install

  - by ZooRocket

  Did a clean install of Ubuntu 12.10 from 12.04 and the sound is not working now. In 12.04 it worked out of the box. I ran hwinfo --sound > hal.1: read hal dataprocess 4222: arguments to dbus_move_error() were incorrect, assertion "(dest) == NULL || !dbus_error_is_set ((dest))" failed in file ../../dbus/dbus-errors.c line 282. This is normally a bug in some application using the D-Bus library. libhal.c 3483 : Error unsubscribing to signals, error=The name org.freedesktop.Hal was not provided by any .service files 10: PCI 1b.0: 0403 Audio device [Created at pci.318] Unique ID: u1Nb.ekgK5auW5RA SysFS ID: /devices/pci0000:00/0000:00:1b.0 SysFS BusID: 0000:00:1b.0 Hardware Class: sound Model: "Intel 82801G (ICH7 Family) High Definition Audio Controller" Vendor: pci 0x8086 "Intel Corporation" Device: pci 0x27d8 "82801G (ICH7 Family) High Definition Audio Controller" SubVendor: pci 0x1028 "Dell" SubDevice: pci 0x01de Revision: 0x01 Memory Range: 0xfdffc000-0xfdffffff (rw,non-prefetchable) IRQ: 11 (no events) Module Alias: "pci:v00008086d000027D8sv00001028sd000001DEbc04sc03i00" Driver Info #0: Driver Status: snd_hda_intel is active Driver Activation Cmd: "modprobe snd_hda_intel" Config Status: cfg=new, avail=yes, need=no, active=unknown Not sure how to proceed to fix this. Has also worked prior to this version.

  Read the article

• Which powerful laptop, with UK keyboard and 8gb ram

  - by RobinL

  I've been searching high and low for high spec laptops compatible with Ubuntu. The lack of coherent information on the topic is high (considering the number of people who apparently want a good laptop with an OS operating system). So I thought you may have some advice. My requirements: a) has = 8Gb ram b) is compatible with Ubuntu c) has a UK keyboard and charger d) does not cost the Earth Which would you go for? Does anyone have good experience with high-end laptops running Ubuntu? So here's some background research: Samsung Series 7 looks great, but has various problems on Ubuntu, including: poor battery life, touchpad does not work, graphics card not fully supported and sucks power when it does (see [here] and [here], for example). Other options on the [wish list] include: the sensible [Acer] (possibly n.1 choice, but not sure about graphics card compatibility or battery), a nice looking [HP Pavilion dv6-6c56ea], which also has incompatibility issues (see [here] and [here] and check ubuntuforums) And another [Acer] which may be best due to its simplicity and cheapness. Other sub-questions: didn't Dell offer Ubuntu support for decent laptops (above 6Gb ram their offerings are scarce); what about pre-installed options such as those provided by System76? If it weren't for the UK keyboard and charger, I'd probably go for this [amazing-looking] [machine]. Many thanks for any advice, P.s. Apologies for lack of hyperlinks; I'm a noob so only allowed 2 :( All 10 links are available here though for the interested reader :) Robin

  Read the article

• Ubuntu 12.04 startup is slow and dmesg output seems to lose several seconds

  - by cdowen

  I use ubuntu on Dell Inspiron n4050.I have upgraded to ubuntu 12.04 from 10.04. But now I find the system startup is a little slow and plymouth only show purple screen without logo during startup. When I use dmesg, it shows such messages: [ 2.497750] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null) [ 2.603028] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd [ 2.715538] Initializing USB Mass Storage driver... [ 2.715594] usbcore: registered new interface driver usb-storage [ 2.715596] USB Mass Storage support registered. [ 21.317843] Adding 2000892k swap on /dev/sda5. Priority:-1 extents:1 across:2000892k [ 21.323724] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 21.391450] udevd[431]: starting version 175 I wonder what it is doing between 2 second and 21 second. Is it related to being so slow? I tried bootchart. It gave me a complex picture. Sorry I can't post it here. http://3.bp.blogspot.com/-7LX8T5uQvlw/UKhdFMVkp4I/AAAAAAAAADg/dtxePkE94mg/s320/lengzhen-ubuntu-precise-20121118-1.png While ubuntu is booting , I also noticed that it appears:/tmp is not ready or present And sometimes follows *Stop saving kernel messages. Is this the reason dmesg lost output?

  Read the article

• Unable to start after 13.04 > 13.10 udate

  - by romainl

  At the end of the update process, clicking on the Restart button had no visible effect whatsoever. After waiting 5 to 10 minutes, I decided to reboot the computer manually. Since then, I rebooted a good dozen times (not with the hope that it would work but with the hope of reading the messages) with the same non-result and the same symptoms: I get the ASCII text-on-purple Ubuntu 13.10 . . . . splash screen with these messages: * Restoring resolver state... [OK] * Starting crash report submission daemon [OK] * Starting CUPS printing spooler/server [OK] Everything disappears. The whole process hangs at a purple screen with the mouse cursor right in the middle. At this point, I'm unable to use the mouse and the keyboard. Booting from a 12.04 CD works perfectly, Disk Utility says that all my disks are OK and I can mount my main partition without problems. Something obviously went wrong at the end of the upgrade but I have no idea what. I'd appreciate any pointer. This is the kind of moment where you really think "Next time, I'll separate my /home partition for sure". My machine is an aging but working Dell Inspiron 530 with an Intel Core Duo E2160 processor, 2 GHz of RAM and an ATI Radeon HD3650 video card. Thanks.

  Read the article

• Librated error when creating partition table

  - by Marko

  I bought a Dell Inspiron 5521 laptop a few days ago that came with Ubuntu preinstalled. I haven't used Ubuntu yet, and I don't have any experience in using it. I wanted to install Windows 7 64-bit on my laptop alongside Ubuntu, and made two bootable USB drives with Gparted and Windows 7. There wasn't a suitable partition on my laptop in which I could install Windows 7. I've read the instructions for using Gparted to create or manage my hard drive. I inserted the USB, booted from BIOS, and followed the procedure in installing Gparted. Then I entered Gparted, and the following error occurred: Librated error when Creating partition table. It asked me to click on either OK or Cancel. Either way I had my hard disk shown to me in the user window, in partitions that were made by the manufacturer: Partition File sys Label Size Flags /dev/sda1 fat32 dellutility 300.00 Mib diag /dev/sda2 fat32 os 3.00 Gib lba /dev/sda3 ext4 912.46 Gib boot /dev/sda4 extended 15.75 Gib (had a subpart) /dev/sda5 linux-swap 15.75 Gib ...and a option to switch to dev/sdb that's unused and of capacity 3Gib. I've used the biggest partition 912.46 Gib, and tried to reduce its size, and clicked OK. Then when I tried to make a new partition, it said it can't make any more partitions, no more than a maximum of 5. I would like to keep Ubuntu and slowly learn, but I also need to use programs that work in Windows. Thank you for taking the time to answer my question.

  Read the article

• HDMI & Display Port stopped work on 11.10

  - by dizzy

  After upgraded two laptops to 11.10, HDMI and Display ports stopped to work. Symptoms on each (btw. it used to work with 11.04 on both): laptop Dell Inspiron 1525 (HDMI, Intel GMX 3100): after HDMI cable is plugged in, screen is corrupted (no panel, no icons), system is unresponsive, TV set receives some signal, but only blue screen and some regular ticks can be heard. Unplugging the cable system recovers. No logs were checked. Thinkpad W510 (DisplayPort, NVidia). Simple "Screens" utility does not recognizes TV set, but this is something to do with the differences between Nvidia driver API and the one expected from the utility, as far I could spot on the net. However, using Nvidia-settings, TV is recognized, but cannot be enabled and used. Beside that, touch pad freezes after HDMI2DisplayPort connector is plugged in the laptop (not immediately, but after few seconds - probably after some handshake with the TV set crashes). It is strange that no such bug reports can be found on the net. So, I guess it is something wrong on our laptops only, but would appreciate some hints (i.e. any known changes recently related to HDMI, Display Port, X-Windows, kernel... wherever I should take a look and fix the issue).

  Read the article

• Ubuntu cannot see Windows 7 partitions on install

  - by Nash0

  I've been trying to install Ubuntu 10.10 as a dual boot with Windows 7 on my Dell latitude e6510. It is currently running Windows 7 and I have used the MS disk tools to shrink the Win 7 NTFS partition to make room for Linux. The issue I'm having is that when I run Ubuntus installer by booting from CD it sees the entire hard drive as unallocated space. I have also tried Kbuntu 10.10, Fedora 14, booting a Gparted 0.8.0 usb drive, and Ubuntu "install in Windows" with wubi they all have problems. EDIT: When I run the "try Ubuntu" option on booting from cd it can mount my Windows partition and I can view the files. The output of sudo parted -l when running in try Ubuntu mode: Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA ST9500420AS (scsi) Disk /dev/sda: 500GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags Warning: Unable to open /dev/sr0 read-write (Read-only file system). /dev/sr0 has been opened read-only. Error: /dev/sr0: unrecognised disk label

  Read the article

• Ubuntu 12.04 gets overheated, whereas I have no heating problems on Windows 7 whatsoever

  - by G K

  I bought a new laptop which came pre-installed with Windows 7. I love working on Ubuntu and hence installed it. I can work on Windows for 6 hours at a stretch and feel the laptop being only slightly warm, but 15 minutes into running Ubuntu and my laptop is too hot. The battery also drains out very quickly on Ubuntu. 1.5 hrs of backup on Ubuntu compared to 5-6 hrs on Windows. I previously owned a Dell Inspiron N5010 and everything ran smoothly on that. No heating issues. It came with intel i3 processor. So I'm wondering whether this problem has something to do with the processor? (AMD A8) Specs: HP Pavilion G6-2005AX Laptop (APU Quad Core A8/ 4GB/ 500GB/ Win7 HB/ 1.5GB Graph) 1 GB AMD Radeon HD 7670M Dedicated 512 MB AMD Radeon HD 7640G Graphics Integrated Is there any fix for this problem? Thanks in advance. Edit: I've installed ATI proprietary drivers suggested by Ubuntu.

  Read the article

• Wireless (Broadcom) just stopped working after putting machine to sleep!

  - by tommed

  Had the wireless working on my Dell Studio 15 for months now (Ubuntu 10.04 64bit, now 10.10 64bit). But I shut the lid this morning, which put the machine to sleep; when I openend it again the wireless would no longer connect to anything :'( I rebooted the machine, but that didn't help. I then did ifconfig eth1 {down,up}, but that didn't help, then I did iwconfig eth1 power {down,on}, but that didn't work. So I uninstalled the wireless driver (Broadcom STA) from additional drivers (reboot in the middle), but it still won't work anymore!! This is the trace from daemon.log, looks like it is a driver issue? Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:39 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - disconnected Nov 28 12:26:45 ulap NetworkManager[1218]: (eth1): supplicant connection state: disconnected - scanning Nov 28 12:26:50 ulap wpa_supplicant[1295]: Trying to associate with MY_MAC_CODE (SSID='MY_WIRESS_SSID' freq=2417 MHz) Nov 28 12:26:50 ulap wpa_supplicant[1295]: Association request to the driver failed Nov 28 12:26:50 ulap NetworkManager[1218]: (eth1): supplicant connection state: scanning - associating Nov 28 12:26:51 ulap wpa_supplicant[1295]: Associated with MY_MAC_CODE Nov 28 12:26:51 ulap NetworkManager[1218]: (eth1): supplicant connection state: associating - associated Nov 28 12:27:01 ulap wpa_supplicant[1295]: Authentication with MY_MAC_CODE timed out. Nov 28 12:27:01 ulap NetworkManager[1218]: (eth1): supplicant connection state: associated - disconnected Anyone seen this, or know how I can get around this issue? It had been working fine up until now?! Even ran update-manager, but there wasn't any changes to the wireless drivers (or any related networking areas). Running the most up-to-date version of 10.10 x64. My android phone and other devices are still working on the wireless.

  Read the article

• Extended display - nightmare

  - by user206343

  I have been struggling for quite a while, and I hope one of you can shed some lights on my issue. I am using Xubuntu 13.10 (Ubuntu 12.04LTS behaves the same way, higher version wouldn't install, LinuxMint didn't install, Fedora didn't install). I am trying to set extend display for two dell monitors 1900x1200. It works great when in mirror mode, but I just cannot extend the display. Either one monitor goes to sleep and the other is unresponsive, or both work but are unusable. This is a link to the picture of my monitors in mirror mode This is link showing what happens after I try to extend the desktop I get the same results if I use aRandr or the built in configuration utility. I have an ATI Radeon X300 card. I cannot use proprietary Catalyst drivers (I would have to use the legacy ones, which would force me into using much older version of the OS). Extension is possible with Windows. I am hoping someone can come up with tweaks that would allow me to run an extended desktop. I truly love Xubuntu (and Ubuntu, unfortunately, Unity is a bit too heavy for my old PC, and I have to run in 2D mode, so 12.04 is as high as I can go). I have tried everything I could find online, but nothing worked thus far. I believe some configuration or something I am missing might work. Please, if you have any idea, do not hesitate. Thanks guys.

  Read the article

• Cannot find GRUB - Ubuntu/Windows 8 dual-boot

  - by ubeatlenine

  Hello Ubuntu community, I find myself in an interesting situation. I have a Dell Inspiron 531 with Windows Vista. Recently my brother decided it would be a good idea to overwrite Vista with the Windows 8 consumer preview. Since we have had this PC for a very long time, we have long since lost the Vista CD, and according to the Windows 8 preview website you cannot recover your previous OS without it. I thought this would be a good opportunity to try out Ubuntu (since we obviously cannot keep the preview as an OS), but it appears that Ubuntu 11.10 Desktop is not compatible with Win8. Ubuntu doesn't run from the LiveUSB I made, instead it freezes on the loading screen and then disintegrates into black and white stripes. I blamed this failure on Ubuntu not being compatible with win8 yet and tried to install Ubuntu from the USB on a partition made from the remaining space on my hard drive - about 100GB. However the installer crashed while loading modules and told me I didn't have enough disk space. Since then, I have not been able to load either Ubuntu or Windows, BIOS is shifted over to the left of my screen, and I always get the same message: error: unknown filesystem grub rescue> typing "ls" at the prompt gives me the following: (hd0) (hd0,msdos7) (hd0,msdos6) (hd0,msdos5) (hd0,msdos2) (hd0,msdos1) does this mean I have multiple partitions running windows on my computer? Is it possible to recover Vista without the disk? Are all of my problems stemming from Ubuntu not being compatible with Win8 preview? (I realize the majority of my questions are about Windows, but seeing as the prompt I get is for grub I thought I would ask here first.) Any insight anyone has on this predicament would be greatly appreciated.

  Read the article

• No WIFI on Ubuntu 12.04 LTS after today software update

  - by Adchara

  I just got new dell inspiron3537 with Ubuntu 12.04 LTS (no windows O/S). It got some wireless (hard block) yesterday. So, this morning, I ran the software update all the security update. After that I can't see "Wireless" in system setting. So, I updated all the software update and looked thru several web site and found "sudo lshw -c network" command. I tried and found the result below. *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: 74:86:7a:40:5d:48 size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.10 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:60 ioport:4000(size=256) memory:c0700000-c0700fff memory:c0400000-c0403fff *-network UNCLAIMED description: Network controller product: QCA9565 / AR9565 Wireless Network Adapter vendor: Qualcomm Atheros physical id: 0 bus info: pci@0000:02:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:c0600000-c067ffff memory:9fb00000-9fb0ffff Please suggest what I should do to fix it. Thx in advance

  Read the article

• How to prevent computer from automatically sleeping and/or hibernating?

  - by mehaase

  I'm running Ubuntu 12.04, and my laptop* won't wake from sleep/suspend/hibernate. (Is sleep the same thing as suspend?) I'm not even sure which of these things it's doing. When I am done working for the day, I lock my screen (Control-Alt-L). When I come back the next day, the screen is in power saving mode, and no amount of typing or clicking (on the usb keyboard/mouse or the builtin keyboard/trackpad) nor tapping the power button will bring it back to life. The only way I can get my machine to work is to hold down the power button until it shuts off, then press the power button again to turn it back on. Obviously, anything I had open from the previous day is pretty much gone -- in particular, my VMs all get rudely shut down without any warning. This is driving me INSANE. I spend the first hour of every work day trying to figure out how to get my computer to stop locking up over night. What I've tried: Editing the org.freedesktop.upower.policy to disable suspend and hibernate. Setting power management options in "Power" section of "System Settings". Looking at all power management options in the BIOS (none appear to be relevant to sleep/suspend/hibernate). Reading every forum post/askubuntu post that I can find that's even tangentially related to the subject. My question: how to disable the automatic sleep and/or hibernate (and/or anything similar) in Ubuntu 12.04. I don't care if it's still possible to sleep/suspend/hibernate/whatever by pushing buttons or running some command or reciting led zeppelin lyrics backwards. I just want my laptop to be ready for work in the morning. *The laptop is a Dell Latitude something or other. I don't want to get too specific because I've seen a lot of similar questions get closed for being too specific. I think my question is generic enough to stand -- it's a question about the latest, stable version of Ubuntu.

  Read the article

• Gnome-shell partially freezes

  - by user568021

  My specs: Ubuntu 12.04.1 LTS, Gnome3, Dell Studio laptop This is not happening all the time, but only sometimes .. totally randomly. When I'm in the middle of some work something totally weird happens. Keyboard suddenly stops working. I can't type, no matter which key I press nothing happens. I can't press Alt+Tab, I can't press Alt+F4, Alt+F2... nothing. Activities button is dead. Also right click does not work...and something even more annoying. I can click on the 'menu' in the top right corner(the menu pops up), but clicking on 'power-off' or 'suspend' option doesn't do anything. The only little thing I can do is: Close the lid of my laptop so it goes to sleep. Than wake it up again. And than it's ok. Everything works. So I guess restarting (or refreshing) gnome-shell fixes the problem. Sorry if the title of this question is odd... I don't know how to properly describe this.

  Read the article

• How do I solve "System is running in low graphics issue" in Ubuntu INSTALLER ?

  - by hellodear

  I made a bootable USB for installing Ubuntu 12.04 LTS alongside Windows 8.1. I inserted my USB device and then booted into it. Then it showed me 2 options - 'Try Ubuntu' or 'Install Ubuntu'. Now I press 'Try Ubuntu' and then it says, "The system is running in low graphics mode". Then I press 'OK'. Then it showed me 4 options. Then again I click 'OK'. Then it shows a black screen and nothing happens. I have tried all possible answers provided in AU. What should I do? Please help. PS :- I am using Windows 8.1 with dedicated graphic card which is AMD Radeon HD 8670M. I am trying to do this in a Dell Laptop 3537 Inspiron. UPDATE :- I tried running the liveUSB session with nomodeset on and i was able to enter the installer. But when I run boot-repair(so that my Ubuntu gets detected in the GRUB menu) after installing Ubuntu successfully alongside Windows 8(following this tutorial with nomodeset on, I get the following error:- your system is running in legacy mode boot repair done

  Read the article

• Problem video nvidia ubuntu 12.04

  - by dragonov7

  I just did a fresh install of ubuntu 12.04 on my PC (Dell precision 370) but the video is not working as it should. Problems: When I log in to unity 3D I get a transparent bar (where the firefox, libre office, etc icons are) but I can see the tooltips when I put my mouse over where the icons are, I can see the top toolbar with no problem and I see just white on the rest of the desktop! When I log in using unity 2D I see the left bar cut in half (so I can't see the trash icon that is at the botton), the toolbar at the top shows OK and the desktop show OK but with some apps. For example, if I open a terminal and maximize it, it will only show just where the left toolbar "cuts". But if I open firefox it will open fine. Config: My PC comes with a nvidia quadro nvs 280 and I see that by default ubuntu is using the nouveau driver. Workarounds tried: I tried uninstalling the nouveau driver and the desktop works fine but I can use only unity 2D. I tried installing the nvidia-173 drivers using synaptic but I get "Could not apply changes! Fix broken packages first". I go to "Edit - Fix Broken packages" and I get the error: "E: Unable to correct problem, you have held broken packages.E: Error, PkgProblemResolver::Resolve generated breakes, this may be caused by held packages.E:Unable to correct dependencies" Output of lspci: 01:00.0 VGA compatible controller: NVIDIA Corporation NV37GL [Quadro PCI-E Series] (rev a2) Any idea so as to what I should do? Thanks in advance for any help. PS: Ah, the nvidia-173 driver was working fine on ubuntu 10.04.

  Read the article

• Oracle regains the #1 UNIX Shipments Marketshare

  - by EricReid-Oracle

  Oracle has regained the #1 UNIX Server Shipments spot! According to IDC, Oracle’s share was 33.6%, up from 32.7% in the year ago period, and 32.2% in C4Q13:  IDC: WW Unix Unit Shipments, Share, Growth 2013Q1 Share 2013Q4 Share 2014Q1 Share Sequential Growth Y/Y Growth Oracle 10,141 32.7% 10,294 32.2% 8,355 33.6% -18.8% -17.6% IBM 10,203 32.9% 11,533 36.0% 6,919 27.8% -40.0% -32.2% HP 7,046 22.7% 6,786 21.2% 6,549 26.4% -3.5% -7.1% Fujitsu 1,174 3.8% 1,141 3.6% 1,069 4.3% -6.3% -8.9% Dell 565 1.8% 499 1.6% 519 2.1% 4.0% -8.2% NEC 69 0.2% 81 0.3% 63 0.3% -22.5% -9.4% Others 1,804 5.8% 1,684 5.3% 1,380 5.6% -18.1% -23.5% Total Market 31,002 100.0% 32,018 100.0% 24,854 100.0% -22.4% -19.8% While the UNIX server space is currently undergoing some contraction (on a pure numbers basis), this can be traced in part to an overall consolidation trend, due to the greatly-increased price-performance of our systems. Consider this: one SPARC T5-4 system has 1/16th the number of sockets and 1/192nd the number of cores of the previous high-end M9000-64 system -- all at 5X the price-performance. SPARC. Solaris. Nuff' said.

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >