Search Results

Search found 2589 results on 104 pages for 'dell powerconnect'.

Page 90/104 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• How to share two keyboard on the same laptop, french iso layout and usa ansi layout keyboard with usb?

  - by reyman64

  I recently buy a "noppoo choc mini" with this specific ANSI US-INTERNATIONAL pc84 layout. This specific keyboard have only 84 key , a 60% (compact tenkeyless) reduced layout My problem is simple, there is no keyboard layout into Ubuntu 12.04 which correspond to this usa normal ansi layout ... so it's the same problem with reduced version and only 84 key .. I search a template of normal ANSI US-INTERNATIONAL for xmodmap/xkb, and after i can try to manually map the other key. I search on google, and i don't find any other user which have same problem, so it's seem i have not the good keywoard to search this information.. Edit 1 : Here you can see there is probably a bug in ubuntu, because the layout for USA with dead key is not correct ! I have this : http://minus.com/lEdKMrsNAwkVA And other users have this for the same layout : http://i.stack.imgur.com/p52XG.png EDIT 2 It seems after a "sudo dpkg-reconfigure keyboard-configuration" : french standard keyboard pc105 + precision M65 keyboard from dell laptop Now i can see the good us layout in parameters, but i cannot have the iso layout for french usage... EDIT 3 Ok, after reboot i understand the probleme, i explain. I have one laptop with integrated french keyboard, and i want to use my usb keyboard which use a usa ANSI layout. It seem it's impossible in ubuntu and "dpkg-reconfigure keyboard-configuration" to share two different physical layout (ANSI and EU ISO) on the same computer ... EDIT4 Ok, it seems i can switch the physical layout (ISO <- ANSI) with this command in terminal : setxkbmap -layout us setxkbmap -layout us -variant alt-intl an setxkbmap -layout fr It's very complicated qnd it seem ubuntu 12.04 have big problem with keyboard manager ... because all works great with these two commands, without ANY change into the system parameters keyboard !!! Second bug ? The image of the layout for fr is buggy, the layout is not ISO, but i can press on the letter "< " at the left of right shift without any problem ! You can see the image here (french alternative with ANSI layout ? it's crazy ?) : http: //minus.com/lXsDJwoeyWAfF Can you help me on this point ? I'm lost with xkb, and manual mapping is very complicated ... Thanks a lot, SR

  Read the article

• Introduction to Lean Software Development and Kanban Systems

  - by Ben Griswold

  Last year I took myself through a crash course on Lean Software Development and Kanban Systems in preparation for an in-house presentation.  I learned a bunch.  In this series, I’ll be sharing what I learned with you.   If your career looks anything like mine, you have probably been affiliated with a company or two which pushed requirements gathering and documentation to the nth degree. To add insult to injury, they probably added planning process (documentation, requirements, policies, meetings, committees) to the extent that it possibly retarded any progress. In my opinion, the typical company resembles the quote from Tom DeMarco. It isn’t enough just to do things right – we also had to say in advance exactly what we intended to do and then do exactly that. In the 1980s, Toyota turned the tables and revolutionize the automobile industry with their approach of “Lean Manufacturing.” A massive paradigm shift hit factories throughout the US and Europe. Mass production and scientific management techniques from the early 1900’s were questioned as Japanese manufacturing companies demonstrated that ‘Just-in-Time’ was a better paradigm. The widely adopted Japanese manufacturing concepts came to be known as ‘lean production’. Lean Thinking capitalizes on the intelligence of frontline workers, believing that they are the ones who should determine and continually improve the way they do their jobs. Lean puts main focus on people and communication – if people who produce the software are respected and they communicate efficiently, it is more likely that they will deliver good product and the final customer will be satisfied. In time, the abstractions behind lean production spread to logistics, and from there to the military, to construction, and to the service industry. As it turns out, principles of lean thinking are universal and have been applied successfully across many disciplines. Lean has been adopted by companies including Dell, FedEx, Lens Crafters, LLBean, SW Airlines, Digital River and eBay. Lean thinking got its name from a 1990’s best seller called The Machine That Changed the World : The Story of Lean Production. This book chronicles the movement of automobile manufacturing from craft production to mass production to lean production. Tom and Mary Poppendieck, that is.  Here’s one of their books: Implementing Lean Software Thinking: From Concept to Cash Our in-house presentations are supposed to run no more than 45 minutes.  I really cranked and got through my 87 slides in just under an hour. Of course, I had to cheat a little – I only covered the 7 principles and a single practice. In the next part of the series, we’ll dive into Principle #1: Eliminate Waste. And I am going to be a little obnoxious about listing my Lean and Kanban references with every series post.  The references are great and they deserve this sort of attention. 

  Read the article

• I Choose iNada

  - by Mark Treadwell

  As a laptop and Kindle user, I have been looking at the usual cyclical Apple frenzy in the press with the same kind of amused tolerance I give my three-year-old son.  They never seem to learn, and they keep repeating the same things.  However when I ready articles like this, I am reminded that that is not always the case. I am a happy user of a monster-sized HP HDX laptop, HP touch screen all-in-one system, and multi-screen Dell desktops at home as well as a HP business laptop at work.  I have no iPod, iMac, iTouch or any other relationship with the company who wants to trademark the prefix “i”. I have not missed them. That is not to say that I have no technological gadgets.  I do.  They just do not dominate Every company wants to preserve their customer base, but Apple just does it too rigidly.  The buy-in necessary rubs me wrong.  When the fanboys scream about the next great iApple thing which will kill off another market segment (this time, the iPad will kill off laptops), the amused tolerance returns. From what I have seen, the iPad virtual keyboard is a poor substitute for an actual keyboard.  It was intended to let you get some kind of text into a device that is not really intended for keyboard input, but rather for touch manipulation of a designed interface.  I like the virtual keyboard on my LG Dare cell phone, but you will not catch me writing my next novel with it.  But, you hear, you can connect a real keyboard and get info from another computer.  That is when you realize that the iPad is not a true standalone device like a laptop.  You have to make more hardware purchases to get what you truly want.  It is an expensive accommodation to get you a different form of freedom. So if Apple made a product with me in mind, you can have it.  Everyone gets to make their own choice.  My choice is the iNada.

  Read the article

• What does the `dmesg` error: "composite sync not supported" mean?

  - by M. Tibbits

  Question: I see [ 20.473125] composite sync not supported and several such entries when I run dmesg. What do they mean? Background: I'm trying to debug a problem where my laptop won't suspend. Since acpi seems happy and I can suspend easily from the command line, I've turned to tracking down all boot-up errors/warnings. So I run dmesg | grep not and, amongst other shtuff, I get: 728:[ 17.267120] composite sync not supported 733:[ 18.009061] composite sync not supported 740:[ 18.159289] registered panic notifier 749:[ 18.162500] vga16fb: not registering due to another framebuffer present 757:[ 18.598251] composite sync not supported 776:[ 20.473125] composite sync not supported 777:[ 20.932266] composite sync not supported 778:[ 28.350231] composite sync not supported 779:[ 28.924913] composite sync not supported 780:[ 35.480658] composite sync not supported And the full log for the few lines right around that first appearance (line 728) is listed at the bottom of my post (I'd happily include anything else). Any ideas what could be causing this? I've read several sites: Ubuntuforums #1 IRC Chat #1 One post talks about ??Adobe flash?? causing this error? Some others also suggest that it might be an nvidia related problem, but I've got a Dell Latitude D630 with an integrated Intel graphics -- so nvidia isn't the problem. [ 17.207142] phy0: Selected rate control algorithm 'minstrel' [ 17.207833] Registered led device: b43-phy0::tx [ 17.207849] Registered led device: b43-phy0::rx [ 17.207865] Registered led device: b43-phy0::radio [ 17.207927] Broadcom 43xx driver loaded [ Features: PL, Firmware-ID: FW13 ] [ 17.267120] composite sync not supported [ 17.415795] EXT4-fs (sda2): mounted filesystem with ordered data mode [ 17.602131] [drm] initialized overlay support [ 17.620201] input: DualPoint Stick as /devices/platform/i8042/serio1/input/input7 [ 17.641192] input: AlpsPS/2 ALPS DualPoint TouchPad as /devices/platform/i8042/serio1/input/input8 [ 18.009061] composite sync not supported [ 18.106042] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af: clean. [ 18.108115] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff: clean. [ 18.108941] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff: clean. [ 18.109676] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7: clean. [ 18.110356] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean. [ 18.159286] fb0: inteldrmfb frame buffer device [ 18.159289] registered panic notifier [ 18.160218] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:01/input/input9 [ 18.160286] ACPI: Video Device [VID1] (multi-head: yes rom: no post: no) [ 18.160334] ACPI Warning for \_SB_.PCI0.VID2._DOD: Return Package has no elements (empty) (20090903/nspredef-433) [ 18.160432] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A03:00/LNXVIDEO:02/input/input10 [ 18.160491] ACPI: Video Device [VID2] (multi-head: yes rom: no post: no) [ 18.160539] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 [ 18.162494] vga16fb: initializing [ 18.162497] vga16fb: mapped to 0xc00a0000 [ 18.162500] vga16fb: not registering due to another framebuffer present [ 18.176091] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21 [ 18.176123] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 18.285752] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input11 [ 18.312497] input: HDA Intel Mic at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 18.312586] input: HDA Intel HP Out at Ext Left Jack as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 18.328043] usbcore: registered new interface driver ndiswrapper [ 18.460909] Console: switching to colour frame buffer device 180x56 [ 18.598251] composite sync not supported

  Read the article

• Brightness Crash and Fan issues in 12.04.1

  - by S.A. McIntosh

  I would just like to state beforehand that I am a total novice in using Ubuntu when it comes to the more complex issues. So I thought it would be best to finally come here and ask for help before being re-directed or closed out for a solution. I have already looked high and low on this board for one but nothing came up for my particular case, so I might as well take a shot asking for the first time here. This is what I have at the moment: -Dell Insprion 1764 w/ 64-bit Intel i5 Core -Dual Boot: Windows 7/Ubuntu 12.04.1 32-bit (from 12.04 install) -Unity shell -Linux kernel: 3.2.0-32 generic-pae ...and this is my fglrxinfo: OpenGL vendor string: Advanced Micro Devices, Inc. OpenGL renderer string: ATI Mobility Radeon HD 5000 Series OpenGL version string: 4.2.11627 Compatibility Profile Context The one issue I have with using Ubuntu is brightness. With the driver in every time I use the slider in the brightness and lock settings or use the keyboard function, it freezes, goes black and comes up with a scrambled colors page like this in the video. So I have looked all over this board and the web for answers looking for a solution that might have an answer. This is what I have done so far to fix this: -First Solution: Looking around, I found this small fix using terminal: sudo gedit /etc/rc.local followed by adding this into "rc.local" echo # > /sys/class/backlight/acpi_video0/brightness This works rarely with the graphics driver still in and I often get lucky say during restart but reboot would only snap back the brightness at max. -Second Solution Simply remove the graphics driver while leaving the solution of first behind. This solves the issue but results in having the monitor flicker and flash at startup which in itself is not a problem to me but maybe not so good for monitor health. Also it causes the fan to speed up throughout the session and render any program that needs the driver useless. -Third Solution This is the most obvious. Just simply use the brightness on AMD Catalyst Control Center software that came with the driver, and I can say that it's form of brightness is HORRIBLE compared to the actual settings. Which leads up to where I am now, back to the driver to stop the fan speed-up and seems that the only solution to the brightness crash is to use the keyboard-controlled brightness at the login screen NOT the desktop if I want the issued effect but will just snap at max bright again if I restart. Fan speed problem is dealt with but now run the risk of crashing my computer if I so much touch the brightness settings. Speaking of which I found this on launchpad and it seems that the issue has been going far since June of 2012. Any help, redirect link or reference would be greatly appreciated. Thank you.

  Read the article

• Can not connect to wireless on 12.04 with Intel WiFi Link 5100

  - by WiData

  I am having problem in connecting to wifi. I have dual boot (Windows 7 and Ubuntu 12.04) on my Dell Studio 15. I upgraded to 12.04 quite some time ago (at least one month) from 11.10. Everything was working fine till yesterday. Since yesterday I can see the list of available Wifi connection but does not connect to any or if connects (after hours of trying) then disconnects after few minutes. My wifi interface is Intel WiFi Link 5100 AGN. However the problem is on both Windows and Ubuntu. Here are outputs of some commands which may be useful for those interested in helping: ~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:22:19:fa:65:bb UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:17 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:794 errors:0 dropped:0 overruns:0 frame:0 TX packets:794 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:56280 (56.2 KB) TX bytes:56280 (56.2 KB) wlan0 Link encap:Ethernet HWaddr 00:22:fb:d2:fc:ce UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:239 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:53603 (53.6 KB) Here is the output for the command sudo lshw -C network *-network description: Wireless interface product: WiFi Link 5100 vendor: Intel Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: wlan0 version: 00 serial: 00:22:fb:d2:fc:ce width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-48-generic-pae firmware=8.83.5.1 build 33692 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:47 memory:f8000000-f8001fff My kernel version is kernel version 3.2.0-48-generic-pae I also checked this post which was helpful. But I am not sure if what is the exact problem. Any suggestions will be helpful. Should I be changing the firmware/driver? Currently my /lib/firmware has following iwlwifi files /lib/firmware/iwlwifi-1000-5.ucode /lib/firmware/iwlwifi-5000-5.ucode /lib/firmware/iwlwifi-100-5.ucode /lib/firmware/iwlwifi-5150-2.ucode /lib/firmware/iwlwifi-105-6.ucode /lib/firmware/iwlwifi-6000-4.ucode /lib/firmware/iwlwifi-135-6.ucode /lib/firmware/iwlwifi-6000g2a-5.ucode /lib/firmware/iwlwifi-2000-6.ucode /lib/firmware/iwlwifi-6000g2a-6.ucode /lib/firmware/iwlwifi-2030-6.ucode /lib/firmware/iwlwifi-6000g2b-6.ucode /lib/firmware/iwlwifi-3945-2.ucode /lib/firmware/iwlwifi-6050-5.ucode /lib/firmware/iwlwifi-4965-2.ucode Thanks a lot for the help.

  Read the article

• Error message during update from 13.04 to 13.10

  - by layonhands

  The following was reported after I attempted to report the problem back to Ubuntu: The problem cannot be reported: You have some obsolete package versions installed. Please upgrade the following packages and check if the problem still occurs: ubuntu-release-upgrader-gtk, apport, apport-gtk, apport-symptoms, apt, apt-utils, at-spi2-core, binutils, dbus, gcc-4.7-base, gdb, gir1.2-atk-1.0, gir1.2-gtk-3.0, glib-networking, glib-networking-common, glib-networking-services, gnupg, gpgv, ifupdown, initramfs-tools, initramfs-tools-bin, kmod, libappindicator3-1, libapt-inst1.5, libapt-pkg4.12, libasound2, libatk-bridge2.0-0, libatk1.0-0, libatk1.0-data, libatspi2.0-0, libc-bin, libc6, libcups2, libdbus-1-3, libdbusmenu-glib4, libdbusmenu-gtk3-4, libdrm-intel1, libdrm-nouveau2, libdrm-radeon1, libdrm2, libgail-3-0, libgcc1, libgcrypt11, libglib2.0-0, libglib2.0-data, libgnutls26, libgomp1, libgstreamer-plugins-base1.0-0, libgstreamer1.0-0, libgtk-3-0, libgtk-3-bin, libgtk-3-common, libgudev-1.0-0, libicu48, libindicator3-7, libkmod2, liblcms2-2, libpci3, libplymouth2, libpolkit-agent-1-0, libpolkit-backend-1-0, libpolkit-gobject-1-0, libprocps0, libpython-stdlib, libpython2.7, libpython2.7-minimal, libpython2.7-stdlib, libpython3-stdlib, libpython3.3-minimal, libpython3.3-stdlib, libssl1.0.0, libstdc++6, libtiff5, libudev1, libx11-6, libx11-data, libx11-xcb1, libxcb-dri2-0, libxcb-glx0, libxcb-render0, libxcb-shm0, libxcb1, libxcursor1, libxext6, libxfixes3, libxi6, libxinerama1, libxml2, libxrandr2, libxrender1, libxres1, libxt6, libxtst6, libxxf86vm1, lsb-base, lsb-release, module-init-tools, multiarch-support, openssl, passwd, pciutils, perl, perl-base, perl-modules, plymouth, plymouth-theme-ubuntu-text, policykit-1, procps, python, python-gi, python-minimal, python2.7, python2.7-minimal, python3, python3-apport, python3-distupgrade, python3-gi, python3-minimal, python3-problem-report, python3-software-properties, python3-update-manager, python3.3, python3.3-minimal, rsyslog, shared-mime-info, software-properties-common, software-properties-gtk, tar, tzdata, ubuntu-release-upgrader-core, ubuntu-release-upgrader-gtk, udev, update-manager, update-manager-core, update-notifier, update-notifier-common If this question has already been answered, I'm sorry for the repost, but I would appreciate a link to the fix. Thanks. FYI: Dell Latitude D630, Intel Centrino processor. Also, the updater is currently running what seems to be the update. I will report back when it is done going through its process to let you know if it is in fact the 13.10 update. Update 2: System went through an update, but it wasn't for the OS. I think it was an update for the error message mentioned above. Now the OS update is currently running the 'distribution upgrade' portion of the update. This is further than it had gone before. Again I will report back once this is done to let you know whether or not the update was successful. Final Update: Don't know for sure what happened, but I'm almost sure that the error mentioned above was resolved in the first update prior to the 13.10 update. All set.

  Read the article

• BI&EPM in Focus December 2012

  - by Mike.Hallett(at)Oracle-BI&EPM

  Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Share with your customers: October Edition of Business Analytics Customer Newsletter (link) Oracle OpenWorld Presentation pdf's available for download (link) OOW Mark Hurd Recap: Business Analytics at Oracle OpenWorld (video | blog) Register your customers for Oracle Days 2012 (link | video) BI & EPM Business Analytics Advisor Webcasts on My.Oracle.Support - Current Schedule and Archived (link) Customers Wüstenrot Efficiently Generates Reports and Analyzes Data with Enterprise Reporting Solution Empresas Públicas Medellin Gathers Data for Annual, Financial Projections 70% Faster ICON Improves Month-End Reporting Significantly Using a Single Source for Timely Consistent Business Intelligence, Reduces Reliance on Spreadsheets  Gilead Sciences, a science-led company backed by business-led IT, uses Oracle solutions to simplify business processes and establish a foundation for continued growth Dell Enhances the Customer Experience with Oracle’s RTD (video) Link to Complete Archive Enterprise Performance Management eBook: Transforming Enterprise Business Planning (link) Blog: Why CFO's should care about Big Data (link) Oracle Hyperion Project Financial Planning - New Projects Feature Release 11.1.2.2 Video Feature Overview. Now Available with many other Hyperion overviews on the YouTube Oracle EPM Channel (link) Available Patch Sets and Patch Set Updates for Oracle Hyperion Enterprise Performance Management Products on My.Oracle.Support (link) Hyperion Disclosure Management supplementary materials provides a set of guides for Disclosure Management and Taxonomy Designer users, including best practices guidelines, a full Disclosure Management sample report, a webinar series, and other guiding materials on My.Oracle.Support (link) See the selection of EPM Customer Videos at MediaNetwork (Hyperion) Business Intelligence Webcast Replay: Big Data, Bright Future, featuring Andrew McAfee (link) Webinar series and guides on Getting Started With Hyperion Interactive Reporting Translation Workbench, a tool that accelerates metadata conversion from IR to Oracle BI Enterprise Edition (OBIEE) on My.Oracle.Support (link) See the selection of BI Customer Videos at MediaNetwork (BI) and for (Exalytics) and (Endeca) ORACLE TEAM USA Analytics Dashboard demo - Now Available (link)

  Read the article

• Sometimes keyboard & touchpad work... sometimes not

  - by Voyagerfan5761

  When I first ran Ubuntu from CD on this Dell Inspiron 2650, it worked for about ten to fifteen minutes, then it hung (I was probably trying to do too much at once from a Live CD). The next time, my mouse and keyboard didn't work. I rebooted three times and finally got them working. I then installed Ubuntu alongside Windows XP. After installing, selecting the OS in GRUB worked, but my touchpad and keyboard were again not working. I rebooted, and they worked. (I fortunately had a USB mouse with which to reboot.) Booting Ubuntu and then rebooting to enable my keyboard and touchpad has become a routine ever since. Often several reboots are required; at one point I had to reboot over a dozen times in a row before getting a session where everything worked properly. (My installation has been in place for about three days a week now.) I've looked around for a device manager equivalent to no avail. Sometimes the hardware is properly detected, and sometimes it's not. Once or twice I've had the keyboard detected properly but the touchpad not. Plugging in my wireless card also sometimes requires a plug, unplug, and plug again to get it working. So is there some solution? I'm without an Internet connection at home, and this "laptop" is really a wall wart on my desk, so suggestions for packages may take a while to test. Xorg logs I captured two three four sample Xorg logs: one from a startup where the devices worked; one from when they didn't; one from a session where Ubuntu thought my touchpad was a normal mouse; and one from a session where my keyboard worked but the touchpad didn't. See this gist. Updated 2010-12-15 01:50 UTC with Xorg.0.log.keyboardonly file illustrating the case where the keyboard worked but not the touchpad. Updated 2011-01-11 04:10 UTC with Xorg.0.log.touchpadregmouse to illustrate a case where the touchpad was detected as a regular mouse (no "Touchpad" tab in mouse prefs).

  Read the article

• Cannot get 3D OpenGL support in Vmware guests, how can I fix this?

  - by jjapol

  I have been working at this problem for 2 days now. I cannot for the life of me enable 3D support in VMWare 9 guests. My specifications are: Hardware: Dell Latitude E5520 laptop. Processor: Intel i7-2620M CPU @ 2.70GHz × 4. Memory: 8GB. Video: Intel Sandybridge Mobile x86/MMX/SSE2 OS: Ubuntu 12.04.1 LTS, 32 bit. Vmware Workstation: 9.0.1 build-894247 Glxgears functions fine. Frame rate is ~60fps. Vmware guest: Windows 7 Starting the Windows 7 guest in VMware throws the following errors: No 3D support is available from the host. and Hardware graphics acceleration is not available. I've read through this VMware forum thread, but again the hardware in the post is different (nVidia). I've followed the instructions at this Ask Ubuntu post as closely as possible as the question is nearly the same as mine although my hardware is different. Answer 1 regarding setting mks.gl.allowBlacklistedDrivers = TRUE; in my vmx configuration file causes the VM to crash when it starts. The second answer I followed as closely as possible. I uninstalled VMware, Did sudo apt-get install build-essential linux-headers-$(uname -r) at a terminal, Added the PPA https://launchpad.net/~glasen/+archive/intel-driver, Then at a terminal did sudo apt-get update && sudo apt-get upgrade -y I reinstalled VMware and have the same results: no 3D in guests. I'm getting the feeling that something is awry with the Sandy Bridge driver, but I can't seem to come up with any solutions. Has anyone out there run across this problem also? By the way, the operation of the likes of Solidworks and AutoCad within a Windpws 7 guest does appear to be improved in VMware 9 vs VMware 8 in spite of the fact that 3D support is lacking in the Windows 7 guest. I'd also add that my glxinfo file was nearly identical to the glxinfo file posted at askubuntu.com/questions/181829/…. I had a total of seven minor differences per a comparison using Meld. –

  Read the article

• Various issues linked to my CD drive, when it has a disc in it

  - by Voyagerfan5761

  When I go to the Desktop and click on a media icon (for my flash drive, a CD, whatever it is), the following problems occur, in this approximate sequence: Nautilus will close if it's open. the desktop icons disappear my Window List shows a button that says "Starting File Manager" the icons reappear the button in Window List disappears Because of this problem, I can no longer drag and drop media, nor can I right-click to perform actions such as "Eject" and "Safely Remove Drive". The same symptoms occur if I click a media icon (that is also present on the desktop) in Nautilus' Computer view, though notably not if I click in the places list on the left. I have confirmed that this problem happens only if there is a CD in the drive (Matshita UJDA360). Also, inserting a disc into the CD drive appears to kill all running programs and restart Nautilus (or X; I'm not sure). Applications like Brasero and Rhythmbox will not start while there is a disc in the drive. Removing the disc doesn't result in the list of media updating; it must be forced to update by clicking on one of the desktop icons and going through one of the above-described cycles. It doesn't seem to matter what type of disc is in the drive. This has happened with CD-RWs I burned years ago using Roxio on Windows XP, the Ubuntu disc I installed from (burned with InfraRecorder Portable under Windows XP), and the retail game disc for Star Trek Armada II. The first indication of a problem was Brasero dying when I tried to insert a disc for erasure and rewriting. Since then, I've drafted several different questions on various issues, finally combining them into this one when I realized that having a CD in the drive was the common link. Could this be a simple driver issue? If Ubuntu is dynamically detecting my hardware on boot, can I specify drivers for devices that I know will be a problem if the default files are used? I'm beginning to think that my laptop, an old Dell Inspiron 2650, is just too old or proprietary-driver-hungry (or something, maybe RAM-starved) for Ubuntu and Windows XP to play nicely alongside each other. Or maybe I just need to carefully take my wall-wart machine to a coffee shop for an afternoon so I can download updates and such from the Internet, as I lack a home connection.

  Read the article

• USB Drive Warm Boot Issue. Cold boot = Perfect. Warm boot = "No boot sector found on USB device"

  - by Dan

  I'm experiencing a boot/reboot quirk similar to, yet somewhat different from others posted here. I have two Western Digital "Passport" external USB2 drives (160GB and 320GB) with Ubuntu 11.10 installed. The BIOS on my laptop is set to boot USB drives before the internal drive, and it works well. Either drive will cold-boot Ubuntu 11.10 perfectly. However, at times the computer must be restarted (warm boot) to have software updates or other changes take effect. When I warm-boot the computer, the computer goes through its normal shutdown/restart, then the usual BIOS tests, at which time the USB drive is selected momentarily (as normal), and that's when the trouble starts. I get a "No boot sector found on USB device", and the computer proceeds to boot Windows from the internal drive. If I press F12 early during the restart sequence (allows manual selection of the boot sequence), USB is still shown before the internal drive on the sequence list (as it should be). If I highlight "USB" and press ENTER, I still get a "No boot sector..." error message, but the external USB drive then proceeds to boot Ubuntu normally. I have a third external USB drive (Western Digital 160 GB Media Center) that cold-boots and warm-boots perfectly, so I know everything in the computer is set up properly. It also tells me Ubuntu is set up correctly on the drives, as all three drives were done identically, and at the same time. I've tried formatting the Passport drives NTFS and FAT32, but it didn't change anything. If I power-down the computer, then start it up again, it will boot Ubuntu from either of the Passport drives perfectly - every time. It's as if during a warm boot the Passport drives are somehow looking for the boot loader in the wrong location on the drive - yet either drives works when booting from a cold start. Not a show-stopper .. but frustrating. Computer is a Dell XPS M1530, A12 BIOS (latest), but I don't think the computer plays into the issue because one of the three drives works at all times. It's only the two WD Passport models at issue here. Thanks!

  Read the article

• Why does the login screen fail to appear?

  - by a different ben

  My system: Dell Precision T3500 nVidia Quadro NVS 295 Ubuntu 12.04 x86_64 (3.2.0-32) Essential problem: On boot my system won't get past the splash screen. I can switch to another virtual terminal and log in, I can also ssh from another system -- so it appears that the problem might be with the display manager. How can I diagnose and fix this problem? More info: From a VT I can issue sudo lightdm restart, and this will bring up the login screen and and I can continue from there. So I do have access to my system. Update-manager recently updated a number of packages, including a bunch of x11 and xorg packages, some nVidia drivers, rpcbind, etc etc. My boot log (if that is any guidance) says the following: fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 fsck from util-linux 2.20.1 rpcbind: Cannot open '/run/rpcbind/rpcbind.xdr' file for reading, errno 2 (No such file or directory) rpcbind: Cannot open '/run/rpcbind/portmap.xdr' file for reading, errno 2 (No such file or directory) /dev/sda1: clean, 597650/1525920 files, 3963433/6103296 blocks /dev/sda7: clean, 11/6406144 files, 450097/25608703 blocks /dev/sda5: clean, 158323/1525920 files, 1886918/6103296 blocks /dev/sda8: clean, 250089/107929600 files, 111088810/431689728 blocks Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Skipping profile in /etc/apparmor.d/disable: usr.sbin.rsyslogd * Starting AppArmor profiles [80G [74G[ OK ] Loading the saved-state of the serial devices... /dev/ttyS0 at 0x03f8 (irq = 4) is a 16550A * Starting ClamAV virus database updater freshclam [80G [74G[ OK ] * Starting Name Service Cache Daemon nscd [80G [74G[ OK ] * Starting modem connection manager[74G[ OK ] * Starting K Display Manager[74G[ OK ] * Starting mDNS/DNS-SD daemon[74G[ OK ] * Stopping GNOME Display Manager[74G[ OK ] * Stopping K Display Manager[74G[ OK ] * Starting bluetooth daemon[74G[ OK ] * Starting network connection manager[74G[ OK ] * Starting Postfix Mail Transport Agent postfix [80G [74G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher * Starting VirtualBox kernel modules [80G [74G[ OK ] * Starting the Winbind daemon winbind [80G [74G[ OK ] saned disabled; edit /etc/default/saned * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ] * Checking battery state... [80G [74G[ OK ] nxsensor is disabled in '/usr/NX/etc/node.cfg' Trying to start NX server: NX 122 Service started. NX 999 Bye. Trying to start NX statistics: NX 723 Cannot start NX statistics: NX 709 NX statistics are disabled for this server. NX 999 Bye. * Stopping System V runlevel compatibility[74G[ OK ] * Starting Mount network filesystems[74G[ OK ] * Stopping Mount network filesystems[74G[ OK ] * Stopping regular background program processing daemon[74G[ OK ] * Starting regular background program processing daemon[74G[ OK ] * Starting anac(h)ronistic cron[74G[ OK ] * Stopping anac(h)ronistic cron[74G[ OK ]

  Read the article

• 5.1 surround sound

  - by rocker9455

  Ok, So i've always had trouble with enabling 5.1 in ubuntu. Running 'alsamixer': I have: Master, Heaphones, PCM, Front, Front Mi, Front Mi, Surround, Center All are at 100% Card:HDA Intel Chip:Realtek ALC888 (This is my onboard sound, Its a dell studio, with 7.1 integrated sound) Running "speaker-test -c6 -twav" I only get the front 2 speakers (Right/Left) making any noise. The others make no noise at all. I have no other sound card to use as all my PCI slots are used up. Daemon.conf: ; daemonize = no ; fail = yes ; allow-module-loading = yes ; allow-exit = yes ; use-pid-file = yes ; system-instance = no ; enable-shm = yes ; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB ; lock-memory = no ; cpu-limit = no ; high-priority = yes ; nice-level = -11 ; realtime-scheduling = yes ; realtime-priority = 5 ; exit-idle-time = 20 ; scache-idle-time = 20 ; dl-search-path = (depends on architecture) ; load-default-script-file = yes ; default-script-file = ; log-target = auto ; log-level = notice ; log-meta = no ; log-time = no ; log-backtrace = 0 resample-method = speex-float-1 ; enable-remixing = yes ; enable-lfe-remixing = no flat-volumes = no ; rlimit-fsize = -1 ; rlimit-data = -1 ; rlimit-stack = -1 ; rlimit-core = -1 ; rlimit-as = -1 ; rlimit-rss = -1 ; rlimit-nproc = -1 ; rlimit-nofile = 256 ; rlimit-memlock = -1 ; rlimit-locks = -1 ; rlimit-sigpending = -1 ; rlimit-msgqueue = -1 ; rlimit-nice = 31 ; rlimit-rtprio = 9 ; rlimit-rttime = 1000000 ; default-sample-format = s16le ; default-sample-rate = 44100 ; default-sample-channels = 6 ; default-channel-map = front-left,front-right default-fragments = 8 default-fragment-size-msec = 10

  Read the article

• Ubuntu doesn't "see" external USB Hard Disk

  - by Mina Michael

  It's NTFS. It's USB2. I'm using Ubuntu 13.04. It works perfectly fine on Windows (which excludes cable and hardware problems). I have two Ubuntu computers and it's not detected on either. It's about 500 GB. Edits: Following the first link, I input sudo lsusb in a terminal; before and after connecting the HDD. The difference was Bus 001 Device 012: ID 14cd:6116 Super Top M6116 SATA Bridge. There it is! ("sata bridge" used to appear in a windows notification when I plugged in the HDD in!). ...This means that Ubuntu detects it but is it not mounting it? I tried this: sudo mount /dev/sdb1 /mnt But gives this: mount: special device /dev/sdb1 does not exist I also tried: sudo mount /dev/sdc1 /mnt but it stays with no output forever. I left it in background for about 30 min.s. sudo fdisk -l gives out this: Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders, total 312581808 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xa42d04a3 Device Boot Start End Blocks Id System /dev/sda1 63 80324 40131 de Dell Utility /dev/sda2 * 80325 102481919 51200797+ 7 HPFS/NTFS/exFAT /dev/sda3 263874558 312580095 24352769 5 Extended /dev/sda4 102481920 263872511 80695296 7 HPFS/NTFS/exFAT /dev/sda5 263874560 310505471 23315456 83 Linux /dev/sda6 310507520 312580095 1036288 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/sdc: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x5822aaea Device Boot Start End Blocks Id System /dev/sdc1 2048 976769023 488383488 7 HPFS/NTFS/exFAT The part below "Partition table entries are not in disk order" takes about 5 minutes to appear. The outputs of ls /dev/ | grep sd before and after connecting the HDD: before: sda sda1 sda2 sda3 sda4 sda5 sda6 ,after: sda sda1 sda2 sda3 sda4 sda5 sda6 sdd sdd1 The second output has the lines sdd and sdd1 different from the first one. IT SHOWED THE FILES!! The command sudo mount /dev/sdd1 /mnt worked after I typed in sudo fdisk -l!!! Thanks a million!! :) :)

  Read the article

• Automatically change resolution when not in dock

  - by jwir3

  I have Ubuntu 11.04 (yep, I know it's old news) on my Lenovo W520. At home, I have a dock with dual monitors. I have a pretty decent setup - things work almost perfectly (hence the reason I'm reluctant to upgrade... that and I'm not 100% sold on Unity). Anyway, the only annoyance I have is that when I'm on travel, I use the laptop screen. When I un-dock the laptop, I need to manually go into nvidia x-server settings and change the resolution from 'Auto' to 1920x1200, or it will think I have two screens, and my mouse pointer will be able to go way off the left side of the screen. This isn't a big deal, but I need to do it every time I restart the x-server (so if I reboot, or have to kill it, etc...) What would be really nice is if there was a way for it to automatically detect whether or not there is external monitors (which it seems to do already), and switch into the mode I select, depending on which monitors are connected. Is there any way to accomplish this? I've posted my xorg.conf file for reference. # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 270.29 (buildd@allspice) Fri Feb 25 14:42:07 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 275.19 ([email protected]) Tue Jul 12 18:35:38 PDT 2011 #Section "Monitor" # Identifier "Monitor1" # VendorName "Lenovo" # ModelName "ThinkpadLCD" # #HorizSync 28.0 - 33.0 # #VertRefresh 43.0 - 72.0 # #Option "DPMS" #EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "DELL U2410" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" Option "RegistryDwords" "EnableBrightnessControl=1" EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-6: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+120, DFP-5: nvidia-auto-select +1920+0" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +1920+419, DFP-5: nvidia-auto-select +3840+0, DFP-6: nvidia-auto-select +0+0" # Removed Option "metamodes" "DFP-5: nvidia-auto-select +0+0, DFP-6: 1920x1200 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "NoLogo" "True" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "TwinView" "1" Option "metamodes" "DFP-5: nvidia-auto-select +1920+0, DFP-6: 1920x1200 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection

  Read the article

• Misused mke2fs and cannot boot into system

  - by surlogics

  I installed Ubuntu with WUBI in Windows 7 64bit, and I had installed Mandriva 2011 with a disk. I tried to learn Linux with Ubuntu and misused mke2fs; after I reboot my computer, Windows 7 and Ubuntu has crashed. As I have Mandriva, I boot into Mandriva and found # df -h /dev/sda7 12G 9.8G 1.5G 88% / /dev/sda2 15G 165M 14G 2% /media/logical /dev/sda6 119G 88G 32G 74% /media/2C9E85319E84F51C /dev/sda5 118G 59G 60G 50% /media/D25A6DDE5A6DBFB9 /dev/sda9 100G 188M 100G 1% /media/ae69134a-a65e-488f-ae7f-150d1b5e36a6 /dev/sda1 100M 122K 100M 1% /media/DELLUTILITY /dev/sda3 98G 81G 17G 83% /media/OS # fdisk /dev/sda Command (m for help): p Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd24f801e Device Boot Start End Blocks Id System /dev/sda1 2048 206847 102400 6 FAT16 /dev/sda2 * 206848 30926847 15360000 7 HPFS/NTFS/exFAT /dev/sda3 30926848 235726847 102400000 7 HPFS/NTFS/exFAT /dev/sda4 235728864 976771071 370521104 f W95 Ext'd (LBA) /dev/sda5 235728896 481488895 122880000 7 HPFS/NTFS/exFAT /dev/sda6 727252992 976771071 124759040 7 HPFS/NTFS/exFAT /dev/sda7 481500243 506674034 12586896 83 Linux /dev/sda8 506674098 514851119 4088511 82 Linux swap / Solaris /dev/sda9 514851183 727246484 106197651 83 Linux Partition table entries are not in disk order I think I may used the following command mke2fs -j -L "logical"/dev/sda2 but I had forgotten what kind of partition it was before I transfered it into ext3. perhaps ntfs Data was not lost, and I can view my files as I could in Windows. In Mandriva, there are following disks: 117.2 GB hard disk, files in it is the same as my Windows D:, and Ubuntu was installed in it; 119.0 GB hard disk is my G:, with my personal files in it; 12.0 GB is the same with Mandriva / (with means root), 101.3 GB hard disk with nothing but lost+found; DELLUTILITY should be Dell computer utilities pre-installed in my computer; logical is the disk which I had spoiled, I can view nothing but lost+found; and OS is the C: in my Windows. After I boot, grub lets me choose Mandriva or Windows. I chose Windows and it tells me: FILE system type unknown, partition type 0x7 Error 13: Invalid or unsupported executable format I doubt something wrong with windows MBR or something # cat /boot/grub/menu.lst timeout 5 color black/cyan yellow/cyan gfxmenu (hd0,6)/boot/gfxmenu default 0 title linux kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot logo.nologo quiet resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd splash=silent vga=788 initrd (hd0,6)/boot/initrd.img title linux-nonfb kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot resume=UUID=34c546e4-9c42-4526-aa64-bbdc0e9d64fd initrd (hd0,6)/boot/initrd.img title failsafe kernel (hd0,6)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=199581b7-ac7e-4c5f-9888-24c4f213cad8 nokmsboot failsafe initrd (hd0,6)/boot/initrd.img title windows root (hd0,1) makeactive chainloader +1 I can boot into Linux, but not Ubuntu, it boot into Mandriva. I don't have a boot disk. Help me find a way to make it work again.

  Read the article

• "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

  Read the article

• Git on Windows 7 expecting Linux? /dev/null not found error

  - by Klikini

  I have installed git (not GitHub) on Windows 7 x64 Home Premium, and I cannot get it to work. Opening Git Bash outputs the following: Welcome to Git (version 1.9.4-preview20140815) Run 'git help git' to display the help index. Run 'get help <command>' to display help for specific commands. sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory sh.exe": /dev/null: No such file or directory Andy@ANDY-DELL ~ $ If I open the Git GUI, I get a this box: Title: git-gui: fatal error Content: fatal: open /dev/null or dup failed: No such file or directory Git Gui requires Git 1.5.0 or later. I also tried GitHub for Windows, but I got an internet connection error when attempting to clone a repo, even though my connection is fine. Is this possibly related? I have learned so far that /dev/null is the Linux version of the Windows NUL, but why is it trying to do this on Windows? Thanks in advance.

  Read the article

• SCCM Report to identify machines with 64-bit capable hardware

  - by GAThrawn

  Currently looking at deployment options for Windows 7. One of the questions we're looking into is 32 bit vs 63 bit. I'm trying to run a SCCM report against our estate to identify which machines are 64-bit capable (whether or not they're currently running a 64-bit OS). There seem to be a few resources out on the net for this (here, here and here) but none of them seem to work right on machines running 32-bit Windows XP. 32-bit XP machines seem to always report that they're running on 32-bit hardware. The query I'm currently running is: select sys.netbios_name0, sys.Operating_System_Name_and0 as OperatingSystem, case when pr.addresswidth0=64 then '64bit OS' when pr.addresswidth0=32 then '32bit OS' end as [Operating System Type], case when pr.DataWidth0=64 then '64bit Processor' when pr.DataWidth0=32 then '32bit Processor' end as [Processor Type], case when pr.addresswidth0=32 and pr.DataWidth0=64 then 'YES' end as [32-bit OS on x64 processor] from v_r_system sys join v_gs_processor pr on sys.resourceid=pr.resourceid I've also tried this, which reports all "Windows XP Professional" systems are on "X86-based PC", not x64 based even though a number of them definitely are: select OS.Caption0, CS.SystemType0, Count(*) from dbo.v_GS_COMPUTER_SYSTEM CS Left Outer Join dbo.v_GS_OPERATING_SYSTEM OS on CS.ResourceID = OS.ResourceId Group by OS.Caption0, CS.SystemType0 Order by OS.Caption0, CS.SystemType0 For instance we have a set of Dell Latitude E4200 laptops. Some of these are running 32-bit Windows XP SP3, some of them are running 32-bit Windows 7, some are running 64-bit Windows 7. All the laptops are identical, having come from the same order. Out of these the Windows 7 (32 and 64-bit) report that the hardware is 64-bit capable, and the Windows XP machines report that they're only 32-bit capable. Does anyone know if there's another value I can query to get the hardware's capabilities correctly on XP, or is there a hotfix that will get it reporting the correct info?

  Read the article

• SQL Server 2008 Cluster Installation - First network name always fails

  - by boflynn

  I'm testing failover clustering in Windows Server 2008 to host a SQL Server 2008 installation using this installation guide. My base cluster is installed and working properly, as well as clustering the DTC service. However, when it comes time to install SQL Server, my first attempt at installation always fails with the same message and seems to "taint" the network name. For example, with my previous cluster attempt, I was installing SQL Server as VSQL. After approximately 15 attempts of installation and trying to resolve the errors, e.g. changing domain accounts for SQL, setting SPNs, etc., I typoed the network name as VQSL and the installation worked. Similarly on my current cluster, I tried installing with the SQL service named PROD-C1-DB and got the same errors as last time until I tried changing the name to anything else, e.g. PROD-C1-DB1, SQL, TEST, etc., at which point the install works. It will even install to VSQL now. While testing, my install routine was: Run setup.exe from patched media, selecting appropriate options After the install fails, I'd chose "Remove node from a SQL Server failover cluster" and remove the single, failed, node Attempt to diagnose problem, inspect event logs, etc. Delete the computer account that was created for the SQL Service from Active Directory Delete the MSSQL10.MSSQLSERVER folder from the shared data drive The error message I receive from the SQL Server installer is: The following error has occurred: The cluster resource 'SQL Server' could not be brought online. Error: The group or resource is not in the correct state to perform the requested operation. (Exception from HRESULT: 0x8007139F) Along with hundreds of the following errors in the Application event log: [sqsrvres] checkODBCConnectError: sqlstate = 28000; native error = 4818; message = [Microsoft][SQL Server Native Client 10.0][SQL Server]Login failed for user 'NT AUTHORITY\ANONYMOUS LOGON'. System configuration notes: Windows Server 2008 Enterprise Edition x64 SQL Server 2008 Enterprise Edition x64 using slipstreamed SP1+CU1 media Dell PowerEdge servers Fibre attached storage

  Read the article

• Bad disk performance on HP DL360 with Smarty Array P400i RAID controller

  - by sarge

  I have a HP DL360 server with 4x 146GB SAS disks and a Smart Array P400i RAID controller with 256MB cache. The disks are in RAID 5 (3 disks + 1 hot spare). The server is running VMware ESX 3i. The disk write performance is really bad. Here are some numbers: ns1:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 3364 MB in 2.00 seconds = 1685.69 MB/sec Timing buffered disk reads: 18 MB in 3.79 seconds = 4.75 MB/sec ns1:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 282.307 s, 3.6 MB/s real 4m52.003s user 0m2.160s sys 3m10.796s Compared to another server those number are terrible: Dell R200, 2x 500GB SATA disks, PERC raid controller (disks are mirrored). web4:~# hdparm -tT /dev/sda /dev/sda: Timing cached reads: 6584 MB in 2.00 seconds = 3297.79 MB/sec Timing buffered disk reads: 316 MB in 3.02 seconds = 104.79 MB/sec web4:~# time sh -c "dd if=/dev/zero of=ddfile bs=8k count=125000 && sync" 125000+0 records in 125000+0 records out 1024000000 bytes (1.0 GB) copied, 35.2919 s, 29.0 MB/s real 0m36.570s user 0m0.476s sys 0m32.298s The server isn't very loaded and the VMware Infrastructure Client performance monitor is showing 550KBps average read and 1208KBps average write for the last 30 minutes (highest write rate: 6.6MBps). This has been a problem from the start. Any ideas?

  Read the article

• Fix ACPI DSDT of Amilo Pa 1538

  - by kayahr

  I have a Fujitsu-Siemens Amilo Pa 1538 laptops and installed Ubuntu 10.04 on it (Kernel 2.6.32). Main problem is that the fans of the notebook are always on even when the temperature is low. Another problem is that the display brightness can not be adjusted. Since some years I use Dell laptops and never experienced any ACPI problems so I thought that it is no longer needed to fix ACPI tables but now I have this crap of a laptop and I think I have to do it. Unfortunately I need some help repairing the DSDT. The dsdt.dat and dsdt.dsl of the laptop can be found here: http://www.ailis.de/~k/permdata/20100420/dsdt/ Compiling the DSDT gives the following output: # iasl -sa dsdt.dsl Intel ACPI Component Architecture ASL Optimizing Compiler version 20090521 [Jun 30 2009] Copyright (C) 2000 - 2009 Intel Corporation Supports ACPI Specification Revision 3.0a dsdt.dsl 81: Method (\_WAK, 1, NotSerialized) Warning 1080 - ^ Reserved method must return a value (_WAK) dsdt.dsl 207: Method (_L10, 0, NotSerialized) Warning 1087 - ^ Not all control paths return a value (_L10) dsdt.dsl 2861: Method (NVIF, 3, NotSerialized) Warning 1087 - ^ Not all control paths return a value (NVIF) dsdt.dsl 4551: Store (\_SB.PCI0.LPC0.PMRD (0xFA), Local0) Warning 1099 - Statement is unreachable ^ ASL Input: dsdt.dsl - 4962 lines, 162828 bytes, 2300 keywords AML Output: dsdt.aml - 17627 bytes, 591 named objects, 1709 executable opcodes Compilation complete. 0 Errors, 4 Warnings, 0 Remarks, 519 Optimizations Anyone here with DSDT experience who can help me fixing the DSDT?

  Read the article

• Megacli is killing me, any help appreciated

  - by Stefan

  I run a server with 2 drives in raid0 configured through BIOS. I just added 2 more drives using hotplug (the server is dell r610 with RHEL 5.4 64bit) and I would like to configure a separate raid0 partition on these drives. I am getting the following error: /opt/MegaRAID/MegaCli/MegaCli64 -CfgLdAdd r0[32:2, 32:3] -a0 The specified physical disk does not have the appropriate attributes to complete the requested command. Exit Code: 0x26 All the parameters are correct and there is just no reason why this command could not work, see this (fujitsu is current raid, seagate is the new one I want to create): /opt/MegaRAID/MegaCli/MegaCli64 -PDList -aALL | egrep 'Adapter|Enclosure|Slot|Inquiry' Adapter #0 Enclosure Device ID: 32 Slot Number: 0 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA101174 Enclosure Device ID: 32 Slot Number: 1 Enclosure position: 0 Inquiry Data: FUJITSU MBD2147RC D807D0A4PA10115T Enclosure Device ID: 32 Slot Number: 2 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS033SE0TF5K Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Inquiry Data: SEAGATE ST9300603SS FS023SE070FK I also tried to set up the drive as hotspare, also some strange error: /opt/MegaRAID/MegaCli/MegaCli64 -PDHSP -Set -physdrv[32:3] -a0 Adapter: 0: Set Physical Drive at EnclId-32 SlotId-3 as Hot Spare Failed. FW error description: The specified device is in a state that doesn't support the requested command. Exit Code: 0x32 As you can see the disk is in Unconfigured, Good state: Enclosure Device ID: 32 Slot Number: 3 Enclosure position: 0 Device Id: 3 Sequence Number: 1 Media Error Count: 0 Other Error Count: 0 Predictive Failure Count: 0 Last Predictive Failure Event Seq Number: 0 PD Type: SAS Raw Size: 279.396 GB [0x22ecb25c Sectors] Non Coerced Size: 278.896 GB [0x22dcb25c Sectors] Coerced Size: 278.875 GB [0x22dc0000 Sectors] Firmware state: Unconfigured(good), Spun Up SAS Address(0): 0x5000c50005cd20b1 SAS Address(1): 0x0 Connected Port Number: 3(path0) Inquiry Data: SEAGATE ST9300603SS FS023SE070FK FDE Capable: Not Capable FDE Enable: Disable Secured: Unsecured Locked: Unlocked Needs EKM Attention: No Foreign State: Foreign Foreign Secure: Drive is not secured by a foreign lock key Device Speed: Unknown Link Speed: Unknown Media Type: Hard Disk Device Drive Temperature :30C (86.00 F)

  Read the article

• Ideal Bacula appliance?

  - by Ricket

  I'm an intern at a small company and we (the IT department of two) manage <100 client computers and a handful of servers. Currently we're using a company's appliance to handle backup; it does a small backup every night and a full backup every weekend, and a guy comes on Wednesday to take an offsite backup drive (and gives back last week's drive to swap with it). Lately this system, mainly the appliance, has been having problems, so we are looking for an alternative. I'm researching other companies but also looking into what we might expect from trying to do this ourselves. There will undoubtedly be a large learning curve, but hey, that's what serverfault is for, right? :) So anyway I was looking at Bacula. Feature list sounds great, documentation is plentiful, but it's only software. So my question is, what is the ideal backup server to run the Bacula server software on? And not only the server but other related appliances. Our current backup appliance uses only hard drives, not tape drives. It has several plugged into it at one time, in hotswap bays on the front of the machine. I couldn't help but notice though, it's hardly more than Windows XP with hard drive bays, a PCI eSATA card (which connects to another appliance extension piece with 2 more bays), and their software. Since the company will take back their appliance if/when we cancel with them, where can I go to configure a server with these kinds of things? Maybe I'm being naive, I'm sure Dell (and any other computer company) sells them in the small business section of their website, but I wanted to make sure that there's not some other more recommended place that other companies are getting their hardware from, and that I don't need anything special for Bacula.

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >