Search Results

Search found 2451 results on 99 pages for 'friend'.

Page 88/99 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Double Layer DVD+R burning problem - I/O Error

  - by Mehper C. Palavuzlar

  I have a modern PC (Quad Core CPU, 4 GB RAM, Win7 Home Premium 64-bit) but I have a problem with burning .dvd images to Double Layer (8.5 GB) DVDs. I wasted too many DVD+R DL discs but to no avail. Here is a short explanation of what I did: I'm using ImgBurn v2.5.0.0 (latest version). I'm trying to burn an image file (.dvd) which is together with the related .iso file in the same folder. In ImgBurn, I select the file with .dvd extension, and set writing speed to 2.4x. Burning process starts normally, but around 7% of the process, it gives a I/O Write Error, which is as follows: I wasted 3 discs (Magic, Made in Taiwan, DVD+R DL, 8.5 GB) trying the same thing. My DVD writer is LG GH22NP20 with IDE connection type. I updated its firmware from 1.04 to 2.00 but no success in burning again. Then my cousin brought his LG (an older model) which, he claims, was successful in writing DL discs with the same brand (Magic). I plugged off my LG and plugged the older one in, and tried to burn the image again. It also gave an I/O Error even without standing till 7%. I tried another burning program (CloneCD), but failed again. Then I bought other brands (TDK and VERBATIM) and tried to burn the image. Burning process started successfully, but around 14% (for Verbatim) and 25% (for TDK) failed again. Here is a screeny from ImgBurn: I've burned lots of 4.7 GB DVD+Rs and DVD-Rs successfully, even without a single error, with this LG DVD writer, but this case is very bothering for me. What should I do? Should I buy a new DVD writer other than LG? Could this be related to Windows or my hardware configuration? Thanks for your help. Edit: My burner works on my cousin's machine. So the problem must be related to my system. What could be the reason? Latest news: I borrowed an external USB DVD writer from a friend, which is PHILIPS SPD3000CC (an old model). Guess what! It's burning DVD+R DLs successfully! How come an internal DVD writer of a brand new computer system cannot burn DL DVDs? Now I'm considering buying a new internal DVD writer with not IDE, but SATA connection...

  Read the article

• Accidentally Removed Permissions for the XP SP3 Registry key HKEY_CLASSES_ROOT! Workaround Please!

  - by Praveen Kumar

  This is Praveen and I am using Microsoft Windows XP SP3 Build 2600. I had problems with using Microsoft Office 2010. It was keeping on saying, "Please wait while windows configures Microsoft Office Professional Plus 2010". After seeing this link: http://social.answers.microsoft.com/Forums/en-US/outlookcontact/thread/6e9c3f2e-010a-4b74-b433-0c41548ee468?prof=required I thought of giving the Registry Key: HKEY_CLASSES_ROOT, full access permissions for Everyone. I went to the registry, right-clicked on HKEY_CLASSES_ROOT and clicked on Permissions. I added Everyone and gave Full Control to the ACL and clicked on Apply. Also I checked "Replace permission entries on all child objects with entries shown here that apply to child objects." After a long time, it said with an error, cannot replace for few entries. Now, the key, HKEY_CLASSES_ROOT has no access to any user. My system is not starting up. Some of my friends asked me to try the Last Known Good Configuration. Even that did not work out. When I tried to open in the Safe Mode, I got only one driver to load and even that didn't load well. Another friend suggested me to put the Setup disk and reinstall the OS. I tried that and after completing the "Installing Device Drivers" part, when it started "Installing Network", the system is getting restarted. Now, the setup is also half way through and even if I open in Safe Mode to try System Restore, it popped up a message saying, "Setup cannot run under Safe Mode. Setup will restart now." and the system is restarting. All my official files and my software, which I developed for Registry Security, resides in my system now. I am unable to access the system and I want it to be working to submit the project, as the deadline is this week. I had no better solutions from elsewhere. Can anyone please help me out with this issue. If it is possible to open the registry editor's stored file from another system and restore the access permissions, I hope it would solve the problem. Please do help me. Thanking You, Praveen.

  Read the article

• Cannot exclude a path from basic auth when using a front controller script

  - by Adam Monsen

  I have a small PHP/Apache2 web application wherein I'd like to do two seemingly incompatible operations: Route all requests through a single PHP script (a "front controller", if you will) Secure everything except API calls with HTTP basic authentication I can satisfy either requirement just fine in isolation, it's when I try to do both at once that I am blocked. For no good reason I'm trying to accomplish these requirements solely with Apache configuration. Here are the requirements stated as an example. A GET request for this URL: http://basic/api/listcars?max=10 should be sent through front.php without requiring basic auth. front.php will get /api/listcars?max=10 and do whatever it needs to with that. Here's what I think should work. In my /etc/hosts I added 127.0.0.1 basic and I am using this Apache config: <Location /> AuthType Basic AuthName "Home Secure" AuthUserFile /etc/apache2/passwords require valid-user </Location> <VirtualHost *:80> ServerName basic DocumentRoot /var/www/basic <Directory /var/www/basic> <IfModule mod_rewrite.c> RewriteEngine On RewriteCond %{SCRIPT_FILENAME} !-f RewriteCond %{SCRIPT_FILENAME} !-d RewriteRule ^(.*)$ /front.php/$1 [QSA,L] </IfModule> </Directory> <Location /api> Order deny,allow Allow from all Satisfy any </Location> </VirtualHost> But I still always get a HTTP 401: Authorization Required response. I can make it work by changing <Location /api> into <Location ~ /api> but this allows more than I want to past basic auth. I also tried changing the <Directory /var/www/basic> section into <Location />, but this doesn't work either (and it results in some strange values for PATH_TRANSLATED being passed to the script). I searched around and found many examples of selective exclusion of basic auth, but none that also incorporated a front controller. I could certainly do something like handle basic auth in the front controller, but if I can have Apache do that instead I'll be able to keep all authentication logic out of my PHP code. A friend suggested splitting this into two vhosts, which I know also works. This used to be two separate vhosts, actually. I'm using Apache 2.2.22 / PHP 5.3.10 on Ubuntu 12.04.

  Read the article

• getfacl command and Linux file permissions - getting 403 error when accessing Wordpress

  - by tommytwoeyes

  I'm configuring Wordpress for a friend, and I just screwed up the Wordpress directory permissions (I suspect) using setfacl. Webfaction doesn't allow sudo or allow me to change the directory group ownership using chown. Now it appears that something I did is causing the entire application to give me 403 errors when I try to access it. The current directory listing looks like this (I set the whole thing to 777 temporarily to try to recover access to it): drwxrwsr-x+ 6 myusername myusername 4096 Mar 2 07:07 ./ drwxr-xr-x 3 root root 4096 Feb 25 19:48 ../ -rwxrwxr-x+ 1 myusername myusername 286 Mar 2 06:33 gzip.php -rwxrwxr-x+ 1 myusername myusername 4831 Mar 4 20:02 .htaccess -rwxrwxr-x+ 1 myusername myusername 397 Feb 25 19:49 index.php -rw-rw-r--+ 1 myusername myusername 15606 Feb 25 19:49 license.txt -rw-rw-r--+ 1 myusername myusername 9200 Feb 25 19:49 readme.html drwxrwsr-x+ 6 myusername myusername 4096 Feb 25 19:49 .svn/ -rwxrwxr-x+ 1 myusername myusername 4337 Feb 25 19:49 wp-activate.php drwxr-xr-x+ 10 myusername myusername 4096 Mar 4 20:03 wp-admin/ -rwxrwxr-x+ 1 myusername myusername 40283 Feb 25 19:49 wp-app.php -rwxrwxr-x+ 1 myusername myusername 226 Feb 25 19:49 wp-atom.php -rwxrwxr-x+ 1 myusername myusername 274 Feb 25 19:49 wp-blog-header.php -rwxrwxr-x+ 1 myusername myusername 3931 Feb 25 19:49 wp-comments-post.php -rwxrwxr-x+ 1 myusername myusername 244 Feb 25 19:49 wp-commentsrss2.php -rwxrwxr-x+ 1 myusername myusername 3485 Feb 25 20:15 wp-config.php drwxr-xr-x+ 6 myusername myusername 4096 Feb 26 08:52 wp-content/ -rwxrwxr-x+ 1 myusername myusername 1255 Feb 25 19:49 wp-cron.php -rwxrwxr-x+ 1 myusername myusername 246 Feb 25 19:49 wp-feed.php drwxrwxr-x+ 9 myusername myusername 4096 Feb 25 19:49 wp-includes/ -rwxrwxr-x+ 1 myusername myusername 1997 Feb 25 19:49 wp-links-opml.php -rwxrwxr-x+ 1 myusername myusername 2453 Feb 25 19:49 wp-load.php -rwxrwxr-x+ 1 myusername myusername 27787 Feb 25 19:49 wp-login.php -rwxrwxr-x+ 1 myusername myusername 7774 Feb 25 19:49 wp-mail.php -rwxrwxr-x+ 1 myusername myusername 494 Feb 25 19:49 wp-pass.php -rwxrwxr-x+ 1 myusername myusername 224 Feb 25 19:49 wp-rdf.php -rwxrwxr-x+ 1 myusername myusername 334 Feb 25 19:49 wp-register.php -rwxrwxr-x+ 1 myusername myusername 226 Feb 25 19:49 wp-rss2.php -rwxrwxr-x+ 1 myusername myusername 224 Feb 25 19:49 wp-rss.php -rwxrwxr-x+ 1 myusername myusername 9655 Feb 25 19:49 wp-settings.php -rwxrwxr-x+ 1 myusername myusername 18644 Feb 25 19:49 wp-signup.php -rwxrwxr-x+ 1 myusername myusername 3702 Feb 25 19:49 wp-trackback.php -rwxrwxr-x+ 1 myusername myusername 3210 Feb 25 19:49 xmlrpc.php The getfacl output looks like this: # file: . # owner: myusername # group: myusername user::rwx group::r-x group:apache:rw- mask::rwx other::r-x I simply wanted to change the ownership to myusername:apache and the file permissions to 755. I have no idea how to fix the permissions now. Any help would be really appreciated! Thanks, Tom

  Read the article

• Python error after installing libboost-all-dev on debian [migrated]

  - by Cameron Metzke

  A friend of mine wanted the liboost libraries installed on our shared computer so after installing libboost-all-dev 1.49.0.1 ( A debian wheezy machine ), I get this error when using the "pydoc modules" command on the commandline. It spits out the following error -- root@debian:/usr/include/c++/4.7# pydoc modules Please wait a moment while I gather a list of all available modules... **[debian:49065] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../../../../orte/mca/ess/singleton/ess_singleton_module.c at line 357 [debian:49065] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../../../../orte/mca/ess/singleton/ess_singleton_module.c at line 230 [debian:49065] [[INVALID],INVALID] ORTE_ERROR_LOG: A system-required executable either could not be found or was not executable by this user in file ../../../orte/runtime/orte_init.c at line 132 -------------------------------------------------------------------------- It looks like orte_init failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during orte_init; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): orte_ess_set_name failed --> Returned value A system-required executable either could not be found or was not executable by this user (-127) instead of ORTE_SUCCESS -------------------------------------------------------------------------- -------------------------------------------------------------------------- It looks like MPI_INIT failed for some reason; your parallel process is likely to abort. There are many reasons that a parallel process can fail during MPI_INIT; some of which are due to configuration or environment problems. This failure appears to be an internal failure; here's some additional information (which may only be relevant to an Open MPI developer): ompi_mpi_init: orte_init failed --> Returned "A system-required executable either could not be found or was not executable by this user" (-127) instead of "Success" (0) -------------------------------------------------------------------------- *** The MPI_Init() function was called before MPI_INIT was invoked. *** This is disallowed by the MPI standard. *** Your MPI job will now abort. [debian:49065] Abort before MPI_INIT completed successfully; not able to guarantee that all other processes were killed!** root@debian:/usr/include/c++/4.7# I tried looking into the problem and ended up uninstalling the following to get it to work again. openmpi common all 1.4.5-1 libibverbs-dev amd64 1.1.6-1 libopenmpi-dev amd64 1.4.5-1 mpi-default-dev amd64 1.0.1 libboost-mpi-python1.49.0 although pydoc works again, I'm assuming the packages I removed are gunna hurt somethiong else down the track ? As you guessed im not a c/c++ programmer. So I guess my question is, will this hurt something later ? is their a way to install those packages without hurting python ?

  Read the article

• So I want to separate my Program Files from the hard disk with the other system files. What is the b

  - by grg-n-sox

  So I am running Windows 7 as my only OS. I have two hard drives on my computer. The first one is a 74GB Western Digital 10K RPM Raptor. The second one is a 1TB Seagate Barracuda (couldn't remember if it was a 7200.12 or some other decimal after the 7200). The OS in installed to the Raptor and I am just using the Barracuda for storage. With this setup, in case you couldn't guess already, the Raptor fills up quick and I am constantly having to maintain file locations. And although it is nice to have that quicker boot time and program loading, the time spent maintaining the drive makes me waste more time overall. So I am looking for a way to try to keep it clear while still keeping up system loading speeds. A performance hit on games and such is easily acceptable and as long as I can guarantee a 5GB space on the Raptor, I can always just temporarily move the disc image there. So I am figuring that having games installed like Boarderlands and Mass Effect, as well as having large files such as linux distro DVD disc images in My Documents, I probably should be moving my personal files and Program Files directories to the Barracuda. I currently have folders on the Barracuda for this, but this means routinely copying files over and I can't really do anything with the Program Files folder that already exists. The best I can do is remember to designate the install directory of any program installation to the alternative install directory, which I can't seem to get to ever work right with Steam. With that in mind, is there a way that is not too drastic to let me just change some folders and system settings once and everything works fine afterwards for my setup? I have considered just reinstalling Windows 7 to the Barracuda but that would defeat the purpose of the Raptor except for running disc images off of. I am also heard a bit about being able to use symlinks to fix this, but I have also heard that symlinks in Windows are not necessarily the same and not as well supported on Windows. An example a friend mentioned was something about how if you have a symlink in Windows on a small hard drive to a large hard drive and the contents the symlink points to is larger than the small hard drive's capacity, then Windows will think the smaller hard drive is full. So is there a fix/workaround that will let me use symlinks across hard drives without the issues or is there a better solution I am not being told about, not mentioning, or not thinking of?

  Read the article

• How do I protect a low budget network from rogue DHCP servers?

  - by Kenned

  I am helping a friend manage a shared internet connection in an apartment buildling with 80 apartments - 8 stairways with 10 apartments in each. The network is laid out with the internet router at one end of the building, connected to a cheap non-managed 16 port switch in the first stairway where the first 10 apartments are also connected. One port is connected to another 16 port cheapo switch in the next stairway, where those 10 apartments are connected, and so forth. Sort of a daisy chain of switches, with 10 apartments as spokes on each "daisy". The building is a U-shape, approximately 50 x 50 meters, 20 meters high - so from the router to the farthest apartment it’s probably around 200 meters including up-and-down stairways. We have a fair bit of problems with people hooking up wifi-routers the wrong way, creating rogue DHCP servers which interrupt large groups of the users and we wish to solve this problem by making the network smarter (instead of doing a physical unplugging binary search). With my limited networking skills, I see two ways - DHCP-snooping or splitting the entire network into separate VLANS for each apartment. Separate VLANS gives each apartment their own private connection to the router, while DHCP snooping will still allow LAN gaming and file sharing. Will DHCP snooping work with this kind of network topology, or does that rely on the network being in a proper hub-and-spoke-configuration? I am not sure if there are different levels of DHCP snooping - say like expensive Cisco switches will do anything, but inexpensive ones like TP-Link, D-Link or Netgear will only do it in certain topologies? And will basic VLAN support be good enough for this topology? I guess even cheap managed switches can tag traffic from each port with it’s own VLAN tag, but when the next switch in the daisy chain receives the packet on it’s “downlink” port, wouldn’t it strip or replace the VLAN tag with it’s own trunk-tag (or whatever the name is for the backbone traffic). Money is tight, and I don’t think we can afford professional grade Cisco (I have been campaigning for this for years), so I’d love some advice on which solution has the best support on low-end network equipment and if there are some specific models that are recommended? For instance low-end HP switches or even budget brands like TP-Link, D-Link etc. If I have overlooked another way to solve this problem it is due to my lack of knowledge. :)

  Read the article

• Troubleshooting an unstable internet connection

  - by Konrad Rudolph

  My MacBook Pro running OS X (10.9, but I had the same problem before) is connected to a Belkin router via WiFi and, using Virgin Media as the ISP, to the internet. The connection is extremely unstable – on some days, I get a ping timeout every few seconds. In addition, some domains seem to suffer general connectivity issues. For instance, I often find that while the youtube.com website loads, none of the videos (which are hosted on a separate domain) do. At other times, videos load but always fail to buffer, even though the actual connection speed is ok, even though I’ve disabled dash playback. Since I’m living in a rented room and the ISP contract isn’t actually mine I’ve got only limited possibilities of addressing the problem. In particular, I have no access to the router configuration and my non tech savvy landlady, while sympathetic, is not in a great hurry to hand the problem over to the ISP’s customer support. What’s more, I seem to be the only person in the house experiencing these problems – but I can imagine that this is simply because I’m the only one who’s using the internet continuously. I’m searching for specific tests that might be able to pinpoint – and ideally solve – the problem. So far all I’ve managed to do is establish that Virgin is routing my traffic in mysterious ways. Here’s an excerpt from traceroute google.co.uk. It’s worth mentioning that the host name doesn’t seem to matter a lot, the trace route is always the same. traceroute: Warning: google.co.uk has multiple addresses; using 62.254.36.148 traceroute to google.co.uk (62.254.36.148), 64 hops max, 52 byte packets 1 (192.168.2.1) 1.112 ms 1.300 ms 2.359 ms 2 10.100.32.1 (10.100.32.1) 11.926 ms 10.217 ms 24.987 ms 3 cmbg-core-1a-ae3-610.network.virginmedia.net (80.1.202.93) 28.809 ms * 66.653 ms 4 popl-bb-1b-ae16-0.network.virginmedia.net (212.43.163.141) 13.759 ms 126.504 ms 20.472 ms 5 nrth-bb-1b-et-010-0.network.virginmedia.net (62.253.175.57) 28.357 ms 16.398 ms 42.387 ms 6 nrth-bb-1c-ae1-0.network.virginmedia.net (62.253.174.110) 27.441 ms 15.622 ms 12.044 ms 7 lutn-icdn-1-ae0-0.network.virginmedia.net (62.253.175.82) 16.678 ms 28.463 ms 28.253 ms 8 * * * 9 * * * 10 * * * ^C If I let it, this goes on until the end of time. It never seems to reach a destination. Is this normal? A friend living in the same town who is also with Virgin Media has a more conventional traceroute output: 7 hops to google.co.uk, all of which send the ICMP TIME_EXCEEDED response. The obvious fix – rebooting the router – doesn’t seem to help. As far as I can tell, the WiFi connection is stable (I can always ping the router) so the problem is further downstream. I’ve tried using an alternative DNS before (OpenDNS) but if anything, this made things worse. In fact, it made all Google services nigh unreachable.

  Read the article

• Moving Windows XP from ICH10R RAID 5 to single disk using Linux [migrated]

  - by tudor

  A friend's machine running Windows XP refused to boot recently which is running 3 SATA disks on RAID 5 (which was previously upgraded from RAID 1 not by me). I have determined there to be a disk failure. The disks have been replaced many times in the past few years. I wish to backup the RAID5 partition before I try anything to fix it. The RAID chipset used is ICH10R/DO. So, I plugged in an extra IDE drive and an Ubuntu USB key and looked at the RAID. The partitioning is a mess, but I did find at least one degraded but working RAID array with two partitions, one 79GB and the other 86GB. Then I: 1) Partitioned my IDE disk using fdisk to have a partition of 80GB and bootable, and marked as NTFS. 2) dd the contents of the array to the partition 3) disconnected everything else 4) inserted a Windows XP CD and ran fixboot, fixmbr, and bootcfg. They all run ok and claim that they worked. (e.g. bootcfg detects the Windows partition, fixboot returns saying that it was written correctly.) However, I'm still getting an error like "DISK FAILURE, BOOT DISK NOT FOUND". I have tried running the GRUB rescue disk, which also runs ok, but won't boot into Windows. It just stops with a flashing cursor after chainloader +1, boot. One clue may be that the partitions appear to be wack. One disk has a 79GB RAID partition on a 500GB drive with a offset, the second disk has a 320GB RAID partition across the whole drive. Additionally, the BIOS lists the RAID size as being 149GB. I don't see how this works. How are they even assembling the array when the partitions are so different? I have also tried running the Windows XP automated repair tool, but that didn't work either. I'm presuming this is something simple. Perhaps Windows is attempting to boot into RAID and, upon not finding it, simply crashing? Perhaps the 79GB partitions offset means that it's looking into the disk by that much? Please help!! To clarify: I want to make the single IDE disk bootable with a copy of the array so that I can prove/disprove that it's just that Windows has become corrupted, and use windows tools to correct it before attempting the same thing on the RAID array. That way I have a working backup and can show the process I used to fix it.

  Read the article

• Where to get laptop replacement parts?

  - by wai

  I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

  Read the article

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  Hello, I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• Asterisk Outgoing CDR Logging To Mysql

  - by user3295551

  Trying to utilize the cdr logging (to mysql) using custom fields. The problem I am facing is only when an outbound call is placed, during inbound calls the custom field I am able to log no problem. The reason I am having an issue is because the custom cdr field I need is a unique value for each user on the system. sip.conf ... ... [sales_department](!) type=friend host=dynamic context=SalesAgents disallow=all allow=ulaw allow=alaw qualify=yes qualifyfreq=30 ;; company sales agents: [11](sales_agent) secret=xxxxxx callerid="<...>" [12](sales_agent) secret=xxxxxx callerid="<...>" [13](sales_agent) secret=xxxxxx callerid="<...>" [14](sales_agent) secret=xxxxxx callerid="<...>" extensions.conf [SalesAgents] include => Services ; Outbound calls exten=>_1NXXNXXXXXX,1,Dial(SIP/${EXTEN}@myprovider) ; Inbound calls exten=>100,1,NoOp() same => n,Set(CDR(agent_id)=11) same => n,CELGenUserEvent(Custom Event) same => n,Dial(${11_1},25) same => n,GotoIf($["${DIALSTATUS}" = "BUSY"]?busy:unavail) same => n(unavail),VoiceMail(11@asterisk) same => n,Hangup() same => n(busy),VoiceMail(11@asterisk) same => n,Hangup() exten=>101,1,NoOp() same => n,Set(CDR(agent_id)=12) same => n,CELGenUserEvent(Custom Event) same => n,Dial(${12_1},25) same => n,GotoIf($["${DIALSTATUS}" = "BUSY"]?busy:unavail) same => n(unavail),VoiceMail(12@asterisk) same => n,Hangup() same => n(busy),VoiceMail(12@asterisk) same => n,Hangup() ... ... For the inbound section of the dialplan in the above example I am able to insert the custom cdr field (agent_id). But above it you can see for the Oubound section of the dialplan I have been stumped on how I would be able to tell the dialplan which agent_id is making the outbound call. My Question: how to take the agent_id=[11] & agent_id=[12] and agent_id=[13] and agent_id=[14] etc and use that as a custom field for cdr on outbound calls?

  Read the article

• DVD Drive Failing on Windows 7

  - by Seth Spearman

  I have x64 Windows 7 running on an ASUS M50VM. The DVD drive works completely unreliably if not at all. But the story is not that simple so bear with me...here are the gory details. When I first got the machine it came with Windows XP and I upgraded it to Windows Vista X64 and the DVD worked fine. When Windows 7 RC2 came out I tried it on a Virtual Machine and I liked it so much that I upgraded the machine to Win7 RC1. The DVD worked fine. Of course, RC1 was going to start spontaneously rebooting, so when Windows 7 was released I DID A CLEAN INSTALL of Windows 7. Just to clarify...by clean install I mean I did a FORMAT of the HARD DRIVE and INSTALLED it from scratch. EVER since then the DVD mostly doesn't work. I can sometime read from disk but that will often hang. (Please see my description below of HANG for details.) CD or DVD writes ALWAYS fail with a HANG (I have done a successful write only one time.) Here is what I mean by HANG... *Explorer Window is unresponsive. *Any software accessing the DVD drive is unresponsive. *The DVD tray will not eject. *Using a paper clip will eject but the disk is usually spinning real hard. *Attempting to shut down windows will fail. I have waited as long as ten minutes but the whole OS seems to hang. I do a hard shutdown. *Sometimes accessing the DVD (when it does not cause a HANG) will still fail and the device will actually seem to disappear from the system until I reboot. A couple of other things. It is NOT a hardware failure. It is the Windows OS. I know this because I swapped out my DVD drive with a friend with the same model...his machine is fine (he is still running Vista X64) and my machine still fails. For what it is worth. I swapped out my primary disk with the INTEL 160GB SSD. EDIT Here is what System Information shows about my DVD drive Drive D: Description CD-ROM Drive Media Loaded No Media Type DVD Writer Name HL-DT-ST DVDRAM GSA-T50N ATA Device Manufacturer (Standard CD-ROM drives) Status OK Transfer Rate -1.00 kbytes/sec SCSI Target ID 0 PNP Device ID IDE\CDROMHL-DT-ST_DVDRAM_GSA-T50N________________RR04____\5&2B5B7F1D&0&1.0.0 Driver c:\windows\system32\drivers\cdrom.sys (6.1.7600.16385, 144.00 KB (147,456 bytes), 7/13/2009 7:19 PM) Any ideas? HELP! Seth B Spearman

  Read the article

• My computer's dying :(

  - by j-t-s

  Hi All I have a sweet computer and have never had any real problems with it until now. I recently formatted my computer and all was well. But now my monitor randomly flickers. The monitor will just go black for about a second or two, then it'll return back to its normal state with all the stuff still on the screen. This is getting progressively worse. Another problem that has started is my computer randomly restarts. (I've managed to prevent it from restarting by removing the check in Automatically Restart from the Startup and Recovery Dialog. But I know this doesn't solve the problem). It also completely freezes up on me. One last thing, this morning I got a big blue screen. I can't remember what it said, but if it happens again I will take note of it and repost. Or if I can find some kind of a log file containing that bluescreen error I will post. I have checked all cords, and they're all fine. Nothing's loose. My computer isn't overheating either. I've taken the case off for 3 whole days and haven't used the computer for those 3 days, which has had no effect. I've checked the connections inside and nothing's loose there either. I know there's nothing wrong with my monitor because my friend has 2 computers and it works perfectly on those computers. I don't understand how my computer could suddenly become so unstable. I'm almost certain that I have no viruses; I full-scan my pc everyday for nastys, and have strict firewall settings. Anyway, I don't see how it could be a virus anyway simply due to the fact that I had these problems right after I formatted, and before I even had the chance to install or copy anything or even connect to the internet. I know it has nothing to do with the way I formatted the computer too, I've been fixing computers for years. Sorry for rambling on, just making sure I don't leave anything out. Has anybody else had this problem? Can somebody please try to help me with this? Thank you :)

  Read the article

• How to unlock and remove a protected partition from Prestigio USB stick?

  - by mr.b

  Ok, so, I have one of those fancy schmancy devices, which is given to me by a frustrated friend of mine. Device is a Prestigio Leather 8GB, which identifies itself to Linux host as: Bus 001 Device 006: ID 1307:0165 Transcend Information, Inc. 2GB/4GB Flash Drive Kernel messages as USB device is plugged in: kernel: [ 2769.580042] usb 1-9: new high speed USB device using ehci_hcd and address 7 kernel: [ 2769.714782] scsi8 : usb-storage 1-9:1.0 kernel: [ 2770.713937] scsi 8:0:0:0: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.714535] scsi 8:0:0:1: Direct-Access 8192MB flash drive 1.00 PQ: 0 ANSI: 2 kernel: [ 2770.715734] sd 8:0:0:0: Attached scsi generic sg3 type 0 kernel: [ 2770.716108] sd 8:0:0:1: Attached scsi generic sg4 type 0 kernel: [ 2770.722175] sd 8:0:0:0: [sdc] 962560 512-byte logical blocks: (492 MB/470 MiB) kernel: [ 2770.722657] sd 8:0:0:0: [sdc] Write Protect is on kernel: [ 2770.731078] sd 8:0:0:1: [sdd] 14012416 512-byte logical blocks: (7.17 GB/6.68 GiB) kernel: [ 2770.731215] sdc: kernel: [ 2770.738251] sd 8:0:0:1: [sdd] Write Protect is off kernel: [ 2770.880328] kernel: [ 2770.885876] sd 8:0:0:0: [sdc] Attached SCSI removable disk kernel: [ 2770.887442] sdd: unknown partition table kernel: [ 2771.049605] sd 8:0:0:1: [sdd] Attached SCSI removable disk So, symptoms are typical for U3-like devices: two separate devices inside of a single flash device. Windows sees it also as two identical usb devices, and mounts two separate drives to system, whereas first one presents itself as a CDROM device, holding a write-protected content, and second is a regular flash-disk partition, that "can" be written to. However, it seems like it's broken in some weird way, since it won't let me write anything to it, format it, nothing, but that's not the issue right now. Question: How can I unlock entire USB stick so it appears to system as a single, 8GB device which can be partitioned and used normally, without restrictions? Since it appeared to be an U3 device, I have tried standard utilities: both U3 Uninstaller by u3.com (found on SoftPedia), and opensource u3_tool from sourceforge (on both Windows and Linux). First utility failed to even detect USB stick as U3 device (simply stood idle while I re-plugged stick several times), while second tool failed with some obscure error about SCSI command unable to do something (I might be able to provide exact errors when I switch back to windows). u3_tool -i /dev/sg3 (Display device info) fails with u3_partition_info() failed: Device reported command failed: status 1 ...and every other option fails with same error, minus first part which states which command precisely has failed. So, apparently, this isn't a U3 device. Or, if it is, it doesn't behave like one. I read on a few occasions that this device protection is done by special command sent to device which tells it to lock itself, and so there should be an unlock command, that would set drive straight. Does anyone have any idea about what could I do to this device to fix it? P.S. I also mentioned a problem with being unable to use second "drive", but I'll tackle that problem when (and if) I manage to merge those two devices into one...

  Read the article

• usb mouse connecting and disconnecting randomly and often

  - by Kalec

  Yes, I know this question has been asked here before but I can't add to the discussion over there and it did not help me, so here goes nothing. I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only ... to move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts ... sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurance. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but i can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing ... most I have done is get rid of the 12 discconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing :| ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work ... think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open

  Read the article

• Where to get laptop replacement parts?

  - by wai

  I am sure some of us have older laptops that still works but just one or two parts started not working very well. However, to send it back to the manufacturer for repair might not be worth the money (as some of them even charge consultation fees just to have it checked) as these old laptops are most probably well beyond warranty. Replacing these one or two parts could give your laptop a new lease of life. For example, I have a Dell Inspiron 640m which the fan recently failed. Everything else still works. I know enough to open up the laptop (after reading the service manual) and put it back together again, hence a replacement fan could save it. However, finding these parts turned out to be difficult. I guess I wouldn't be able to get it from Dell since I have been searching around the Dell forums and concluded if I were going to get Dell to at least talk to me, I would have to pay some money (since my warranty expired). I found this online:- http://www.parts-people.com/index.php?action=item&id=3725 However, as I don't live in the United States, shipping alone would cost me 3 times more than the part in question. In addition, if there's a problem, it would be difficult because I probably would have to mail the parts back (costing more money). One of my friend spilled water on her Macbook, she sent it back to Apple and they told her the cost of repairing it exceeds that of buying a new Macbook. They probably have to change everything except the LCD screen. I opened it up and found that most of the parts are still working, only the RAM had fried. Replaced it and it's working again. For some time before discovering only the RAM fried, I was toying with the idea of replacing the logic board myself but looks like I didn't have to. =) Now I know there's a site for Macbooks used replacement parts:- http://www.ifixit.com/ The question is, does anyone know where to get replacement parts at their own locality? It might benefit the community as a whole. Someone might know a local computer store that sells precisely just the things we needed (for now, I hope to find a shop that sells just the fan). If you own a laptop which you had an easy experience finding the replacement parts, do post that as well. PS: I wish laptop manufacturers have outlets where they sell these replacement parts (or at least let you place an order).

  Read the article

• USB mouse connecting and disconnecting randomly

  - by Kalec

  I've bought an acer aspire 5742G about 2 months ago or so and it's been running great, but sometimes I used to hear the windows error beep but I had no idea what was causing it since the "bug" was automatically fixed so fast I couldn't even see an error message (also it kinda always happened when I was busy also, either in a game or while doing my homework). Later on my mouse would simply not work for 3-5 seconds then work again, I thought nothing of it at the time. I also had a problem where it only worked in one usb and one only. To move it I had to remove the battery, unplug the laptop and hold the power button for 2 minutes to reset the bios settings. Since today though it went nuts. Sometimes it disconnects / reconnects 12 times in 10 seconds and windows just keeps beeping till I unplug it, then it runs smooth for 5-6 minutes then it goes nuts again. Other times it seems like it skips (disconnects for a fraction of a second) other times just for 2-3 seconds. But this is incredibly frustrating. Sometimes the power just goes down (the laser turns off) and well that at least I would understand but this is a rare occurrence. Now I know the usb ports work since I have a lot of other devices connected and I tried the mouse on a room m8's laptop so the mouse also works. My only conclusion is that it's an operating system / settings bug and / or problem (I have tried the mouse in all ports by the way). All drivers and bios are up to date (maybe except mouse but I can't seem to update that and the mouse has no name, just a serial number which helps with nothing. Still it worked till today and nothing should have changed any way). I have made sure windows can't shut it down to save power (in device management). Also I tried to delete the drivers and re-install them, rebooting and the power button trick but nothing. Most I have done is get rid of the 12 disconnects / reconnects every 10 seconds :) but that's all :( I would buy a new one but I'm afraid it might do the same thing. ****EDIT****** Tried the mouse again at a friend but now it didn't even install it's software nor did the update work. Think I'll just buy a new one but I'd still like a suggestion at least so I'll leave this open #### EDIT 2 Now it works again, I can't explain this. Still thinking of getting a new one though

  Read the article

• Mercurial not receiving push

  - by Jeffrey04

  I have a mercurial web-frontend (hgwebdir.cgi) installed on a server, and an installation of nginx was installed in front of it as a reverse proxy to the web-frontend as my friend suggested. However, whenever a large changeset is pushed (via a script), it would fail. I found an issue ticket @google-code that describe similar problem, and there is a solution that says (#39) So the server side answer is: don't send the 401 back early. Be as slow/dumb as 'hg serve' and make the hg client send the bundle twice. How do I do that? My current nginx config location /repo/testdomain.com { rewrite ^(.*) http://bpj.kkr.gov.my$1/hgwebdir.cgi; } location /repo/testdomain.com/ { rewrite ^(.*) http://bpj.kkr.gov.my$1hgwebdir.cgi; } location /repo/testdomain.com/hgwebdir.cgi { proxy_pass http://localhost:81/repo/testdomain.com/hgwebdir.cgi; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_buffering on; client_max_body_size 4096M; proxy_read_timeout 30000; proxy_send_timeout 30000; } From the access log we keep seeing 408 entries incoming.ip.address - - [18/Nov/2009:08:29:31 +0800] "POST /repo/testdomain.com/hgwebdir.cgi/example_repository?cmd=unbundle&heads=73121b2b6159afc47cc3a028060902883d5b1e74 HTTP/1.1" 408 0 "-" "mercurial/proto-1.0" incoming.ip.address - - [18/Nov/2009:08:37:14 +0800] "POST /repo/testdomain.com/hgwebdir.cgi/example_repository?cmd=unbundle&heads=73121b2b6159afc47cc3a028060902883d5b1e74 HTTP/1.1" 408 0 "-" "mercurial/proto-1.0" Is there anything else I can do on the server because solving it on the server side is preferable :/ Further Findings Bitbucket seems to have this solved ( Check liquidhg bitbucket project and the Diagnosis wiki page ) on the server side, can't find the config anywhere though :/ What happens next varies depending on your server. Some servers refuse the BODY, simplying closing the pipe from the client and causing Mercurial to fail. Some, like Apache (at least the way I configure it, and that could be part of the problem) and nginx (they way BitBucket.org configures it), accept the BODY, though it may take a few retries. Bottom line: if Mercurial doesn't fail the push, it sends the changeset data at least once to a server that has already told it it lacks credentials (more on this at Blame). Assuming Mercurial is still running, it resends the "unbundle" request and data, this time with authentication. Finally, Apache accepts the data successfully. Nginx, OTOH, at least under BitBucket's configuration, seems to reassemble the previous body (the one that lacked authentication) and somehow keep Mercurial from re-sending the whole body.

  Read the article

• Local admin password recovery: Windows Vista

  - by Jim Dennis

  I am faced with an unsettling situation. A friend of my father's has rather suddenly become a widower. Naturally they've taken care of the bank accounts and all the normal mundane things that people have been doing for a century or so. However, she was the computer user of the household. He was aware that they had some online banking stuff and bill paying stuff ... and that she spent lots of time on FaceBook and stuff like that. However, he doesn't know what her local passwords were (actually only vaguely aware that her couple of desktop and couple of laptop system even had passwords). He's never heard of "admin" passwords so that's no good either. In the past I've used KNOPPIX and the old LinuxCare "bootable business card" to recover NT passwords. I've never done this with MS Windows Vista. So, I'm looking for the best advice on how to do this. Naturally I do have physical access to the systems (the two laptops are charging across the room from me; and her old desktop systems are, naturally, still back at his place). Getting it right is much more important than fast or easy (I don't want to mess up those filesystems and possibly lose some photos or other stuff that he or his kids or grandkids will want). (BTW: if anyone things this is some social engineering hack to play upon the sympathies of the community to get the information I'm asking for ... think about it for a minute. I know about IRC and the "warez" boards. I know I can find this stuff out there if I dig enough. I'm just asking here because it'll hopefully be faster and, secondarily to raise awareness. As more of us put more of our lives online ... as we get older and as places like FaceBook continue to widen the appeal of computing to a broader segment of older people ... we are, as computer nerds, going to see a lot more of this. Survivors will needs us to be careful, sensitive and ethically responsible as they try to recover those bits of legacy during their bereavement. I can now tell you, first hand, it sucks!)

  Read the article

• How can I change how OS X's 'say' command pronounces a word?

  - by jwhitlock

  OS X's say command is useful for some tasks (such as Skype's 'notify me when a contact comes online), but it is pronouncing some names incorrectly. Is there a way to teach say to pronounce a word differently? For example, try: say "Hi, Joel Spolsky" The 'ol' sounds like 'ball' rather than 'old'. I'd like to add an exception that say "Pronounce Spolsky like this", rather than try to teach new linguistic rules. I bet there is a way since it can pronounce "iphone" as Apple wants. Update - After some research, here's what I've learned: Text-to-speech is split between turning the text to phonemes, and then the phonemes are turned into audio using a voice. Changing the voice doesn't effect the phonemes. The Speech Synthesis Manager has some functions for turning text to phonemes, and a method for registering a speech dictionary that will add new text-phoneme maps. However, Apple's speech dictionary must be in a binary form - I didn't find any plist XML. Using dtrace while running say, I found some interesting files opened in /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources. This is probably the speech dictionary, but they are all binary, except for Homophones, which is XML. Adding entries to Homophones does nothing - it is probably used in speech-to-text. They are also code signed by Apple - changing them may prevent some programs from working. PrefixDictionary CartNames CartLite SymbolDictionary Homophones There are ways to add text versions of application interface elements so VoiceOver works, a lot of which a developer gets for free, but there are tricky bits. The standard here appears to be to use a phonetic spelling as needed. My guesses are: say is a light layer of code on top of the Speech Synthesis Manager. It would be easy for the Apple devs to add a command line option to take the path to a speech dictionary plist for alternate phoneme mapping, but they didn't. It may be a useful open-source project to write a better say. Skype probably uses Speech Synthesis Manager directly, leaving no hooks to change the way my friend's names are pronounced, other than spelling them phonetically, which is silly. The easiest way to make a command line version of say is how JRobert suggested. Here's my quick implementation, using Doug Harris's spelling suggestion: #!/bin/sh echo $@ | tr '[A-Z]' '[a-z]' | sed "s/spolsky/spowlsky/g" | /usr/bin/say Finally, some fun command line stuff: # Apple is weird sqlite3 /System/Library/PrivateFrameworks/SpeechDictionary.framework/Resources/Tuples .dump # Get too much information about what files are being opened sudo dtrace -n 'syscall::open*:entry { printf("%s %s",execname,copyinstr(arg0)); }' # Just fun say -v bad "Joel Spolsky Spolsky Spolsky Spolsky Spolsky, Joel Spolsky Spolsky Spolsky Spolsky Spolsky" echo "scale=1000; 4*a(1)" | bc -l | say

  Read the article

• Seeking past end of file causes Apache hang, and it never restarts.

  - by talkingnews

  I've actually solved my problem with a better script, but I'm still left wondering why Apache2 hung completely - this is an out-of-the-box ISPCONFIG 3.03 install, everything bang up to date, running perfectly. Until... The troublesome but innocent-looking script: $fp = fopen("/var/log/ispconfig/cron.log", "r"); fseek($fp, -5000, SEEK_END); $line_buffer = array(); while (!feof($fp)) { $line = fgets($fp, 1024); $line_buffer[] = $line; $line_buffer = array_slice($line_buffer, -10, 10); } foreach ($line_buffer as $line) { echo $line; } You get the idea, just a script I found on a forum somwehere. I did this for various logs, since it's a nice easy window on what's occurring (in a protect dir, of course!). One day, the logs having grown large an me having sorted all my cron, scripting and mail queue errors, I thought I was time to start afresh. updated, rebooted, archived and deleted the logs. When I ran my script a couple of hours later, it hung. And hung. 8 minutes I waited. Chrome timed the page out, of course, but the server never came back to life. htop showed /usr/sbin/apache2 -k restart using 100% CPU. Never came back until I did a service apache2 restart. Ran fine, as soon as I hit that logfile again...dead. So, I worked out it was the logfile script, and I worked out that seeking beyond the end of the file wasn't good, and I found a better script http://www.php.net/manual/en/function.fseek.php#90450 But what I'm left wondering is... why didn't something restart or kill the process? How was one hanging page able to bring down the whole server? It's running suphp. I say "out of the box", I've tweaked mysql and apache to fork and reserve sensible amounts of processes for the 512Mb RAM the VPS has, and it'll handle multiple refreshes of large pages, and hadn't hung before. Any ideas how I'd avoid this? Google isn't my friend in this instance beyond the reccs. above about number of processes vs RAM available.

  Read the article

• System won't boot: Gigabyte HD 7790 1GB OC GPU issue or Corsair VS550 PSU issue?

  - by MGOwen

  Installed a new GPU, and PC won't boot. Turn it on and: No monitor signal at all (tried HDMI and VGA via DVI, on 2 working monitors). CPU and GPU fans DO spin, but No system beeps, no sounds from drives (they might make a small noise in the first 1 second or so, but there's definitely no OS loading or anything like that) If hit "power off" button it turns off immediately (no holding down for 3 seconds like usual) If I put my old HD 5670 GPU back in, everything works fine. But (plot twist!) card is not totally dead. My friend put it in his PC, and it works fine (he even played a game for 15 minutes, no issues). He has a Corsair TX850 850W and a Gigabyte MB. So my main theory is: the GPU isn't getting enough power from the PSU. But is it: Bad PSU? Seems unlikely, since it works fine with the other GPU. Also, the PSU Is brand new and 550W (single 42A/504W 12V rail). Overkill for this GPU. Corsair is a decent brand, but maybe just mine is faulty? Bad GPU? Could it be drawing more power than it should be, somehow, or something? Supposedly HD 7790 needs only 21A/75W on the 12v rail, though this one is factory overclocked a bit... but should that triple the power requirement? Something else? Could there be a motherboard incompatibility somehow? Both MB and GPU are less than a year old and PCI Express 3.0 x16. Things I've tried: Re-seating the video card Testing PC with old GPU (works fine, same PCIe slot). Checked AMD's stated amp/watt requirements of a 7790 and my PSU (see above). My PSU can output twice the amps (single rail) and 5x the Wattage a 7790 needs. Here are the full specs: Gigabyte HD 7790 1GB OC GPU Corsair VS550 550W PSU 4GB RAM AsRock H61M U3S3 motherboard i3-2100 500GB SATA HDD (2007-ish) blu-ray drive (new) PCI 802.11g card Edit: Motherboard BIOS Update seems to have fixed it. (If anyone has same problem and it doesn't work, comment here).

  Read the article

• Windows 7 losing one of my displays after restart

  - by j_kubik

  I have an Intel DZ68BC motherboard with Intel HD graphics card using two monitors (on DVI and on HDMI » VGA). My friend asked me to test if his NVIDIA graphics card works well on my computer (at his it was doing some trouble), so I inserted it in my computer, installed the NVIDIA driver and it worked quite well. Then I removed it, uninstalled everything NVIDIA-related I could find and switched monitors back to my Intel card. Since then after every system start/restart, the system sees only monitor on HDMI » VGA connector, completely ignoring the DVI monitor. I noticed that installing the Intel video drivers causes the system to recognize the second monitor if I don't immediately reboot. After a reboot, the system recognizes only the HDMI » VGA monitor. I also tried starting in safe-mode and using DriveSweeper to remove the remains of NVIDIA drivers. While it seems that some drivers were removed, the situation didn't change. Now I am out of ideas and I really wouldn't like to reinstall the system (again...). I also tried restoring the system to the state before this whole story, but it also didn't change anything. EDIT: I am still trying to troubleshoot this problem. The only point that I could start was driver re-instalation. I traced down the part that restores right settings to a call: C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\x64\Drv64.exe -driverinf "C:\Users\Jarek\Desktop\GFX_Win7_64_8.15.10.2696\Graphics\igdlh64.inf" -flags 20 -keypath "Software\Intel\Difx64" This call fixes my displays, and as workaround, I will add it for now to my autorun. I am still looking for better solution anyway... EDIT2: Using DriverView i made a list of currently used drivers both before and after fixing my display using above command. Then i compared logs: No drivers were removed by fixing command. Drivers added by fixing command: MS Remote Access serial network driver (asyncmac.sys) security processor (spsys.sys) Drivers that changed base address (indicates driver-reload?) Canonical Display Driver (cdd.dll) Intel Graphics Kernel Mode Driver (igdkmd64.sys) Monitor Driver (monitor.sys) Added drivers seem rather unrelated to the problem to me, reloaded drivers are just a cnsequence of installing new driver file so there is not much to go here... I really cannot make heads or tails out of it...

  Read the article

• ZFS Recover from Faulted Pool State

  - by nickv2002

  I have a six disk ZFS raidz1 pool and had a recent failure requiring a disk replacement. No problem normally, but this time my server hardware died before I could do the replacement (but after and unrelated to the drive failure as far as I can tell). I was able to get another machine from a friend to rebuild the system, but in the process of moving my drives over I had to swap their cables around a bunch until I got the right configuration where the remaining 5 good disks were seen as online. This process seems to have generated some checksum errors for the pool/raidz. I have the 5 remaining drives set up now and a good drive installed and ready to take the place of the drive that died. However, since my pool state is FAULTED I'm unable to do the replacement. root@zfs:~# zpool replace tank 1298243857915644462 /dev/sdb cannot open 'tank': pool is unavailable Is there any way to recover from this error? I would think that having 5 of the 6 drives online would be enough to rebuild the right data, but that doesn't seem to be enough now. Here's the status log of my pool: root@zfs:~# zpool status tank pool: tank state: FAULTED status: One or more devices could not be used because the label is missing or invalid. There are insufficient replicas for the pool to continue functioning. action: Destroy and re-create the pool from a backup source. see: http://zfsonlinux.org/msg/ZFS-8000-5E scan: none requested config: NAME STATE READ WRITE CKSUM tank FAULTED 0 0 1 corrupted data raidz1-0 ONLINE 0 0 8 sdd ONLINE 0 0 0 sdf ONLINE 0 0 0 sdh ONLINE 0 0 0 1298243857915644462 UNAVAIL 0 0 0 was /dev/sdb1 sde ONLINE 0 0 0 sdg ONLINE 0 0 0 Update (10/31): I tried to export and re-import the array a few times over the past week and wasn't successful. First I tried: zpool import -f -R /tank -N -o readonly=on -F tank That produced this error immediately: cannot import 'tank': I/O error Destroy and re-create the pool from a backup source. I added the '-X' option to the above command to try to make it check the transaction log. I let that run for about 48 hours before giving up because it had completely locked up my machine (I was unable to log in locally or via the network). Now I'm trying a simple zpool import tank command and that seems to run for a while with no output. I'll leave it running overnight to see if it outputs anything.

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >