Search Results

Search found 2525 results on 101 pages for 'jared green'.

Page 88/101 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Has the hardware in my modem gone bad?

    - by Tyler Scott
    I contacted CenturyLink about my modem recently and received useless and unrelated information. The problem seems to be that the modem will no longer save settings, the web interface is unusable except in internet explorer for some reason, and the modem keeps resetting. CenturyLink claimed it had to do with signal strength but I checked and it is currently between good and outstanding according to this. All of the lights remain green even when it starts acting up and I lose internet and shortly before it crashes and reboots. Does anyone have any idea what is going on or what I can do to fix it? (Asking CenturyLink again is obviously not going to help.) Update 1: Accessing the syslog from the web interface causes a crash. After it reboots, the log looks like as follows: 01/01/1970 12:01:29 AM Ethernet Ethernet client connected ,ip(192.168.0.2), mac(1c:6f:65:4c:6d:3b) 01/01/1970 12:01:38 AM Wireless 802.11 client connected ,ip(192.168.0.18), mac(d0:df:c7:c2:73:ca) 01/01/1970 12:01:41 AM System Event Line 0: VDSL2 link up, Bearer 0, us=20128, ds=40127 01/01/1970 12:01:43 AM dhcp6s[2028] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:50 AM dhcp6s[2469] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 01/01/1970 12:01:52 AM radvd[2306] poll error: Interrupted system call 01/01/1970 12:01:56 AM PPP Link PPP server detected. 01/01/1970 12:01:56 AM PPP Link PPP session established. 01/01/1970 12:01:56 AM PPP Link PPP LCP UP. 01/01/1970 12:01:56 AM System Event Received valid IP address from server. Connection UP. 06/05/2014 08:16:01 AM radvd[2511] poll error: Interrupted system call 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:03 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM System Event Dead loop on virtual device tun6rd, fix it urgently! 06/05/2014 08:16:04 AM dhcp6s[3236] dhcp6_ctl_authinit: failed to open /etc/dhcp6sctlkey: No such file or directory 06/05/2014 08:16:08 AM Wireless 802.11 client connected ,ip(192.168.0.7), mac(44:6d:57:c4:d7:08) I also get it to crash on various other pages. I am guessing the web server is unstable.

    Read the article

  • Looking for Fiddler2 help. connection to gateway refused? Just got rid of a virus

    - by John Mackey
    I use Fiddler2 for facebook game items, and it's been a great success. I accessed a website to download some dat files I needed. I think it was eshare, ziddu or megaupload, one of those. Anyway, even before the rar file had downloaded, I got this weird green shield in the bottom right hand corner of my computer. It said a Trojan was trying to access my computer, or something to that extent. It prompted me to click the shield to begin anti-virus scanning. It turns out this rogue program is called Antivirus System Pro and is pretty hard to get rid of. After discovering the rogue program, I tried using Fiddler and got the following error: [Fiddler] Connection to Gateway failed.Exception Text: No connection could be made because the target machine actively refused it 127.0.0.1:5555 I ended up purchasing SpyDoctor + Antivirus, which I'm told is designed specifically for getting rid of these types of programs. Anyway, I did a quick-scan last night with spydoctor and malware bytes. Malware picked up 2 files, and Spydoctor found 4. Most were insignificant, but it did find a worm called Worm.Alcra.F, which was labeled high-priority. I don’t know if that’s the Anti-Virus Pro or not, but SpyDoctor said it got rid of all of those successfully. I tried to run Fiddler again before leaving home, but was still getting the "gateway failed" error. Im using the newest version of firefox. When I initially set up the Fiddler 2.2.8.6, I couldn’t get it to run at first, so I found this faq on the internet that said I needed to go through ToolsOptionsSettings and set up an HTTP Proxy to 127.0.0.1 and my Port to 8888. Once I set that up and downloaded this fiddler helper as a firefox add-on, it worked fine. When I turn on fiddler, it automatically takes my proxy setting from no proxy (default) to the 127.0.0.1 with Port 8888 set up. It worked fine until my computer detected this virus. Anyway, hopefully I've given you sufficient information to offer me your best advice here. Like I said, Spydoctor says the bad stuff is gone, so maybe the rogue program made some type of change in my fiddler that I could just reset or uncheck or something like that? Or will I need to completely remove fiddler and those dat files and rar files I downloaded? Any help would be greatly appreciated. Thanks for your time.

    Read the article

  • Looking for Fiddler2 help. connection to gateway refused...just got rid of a virus?

    - by john mackey
    I use Fiddler2 for facebook game items, and it's been a great success. I accessed a website to download some dat files I needed. I think it was eshare, ziddu or megaupload, one of those. Anyway, even before the rar file had downloaded, I got this weird green shield in the bottom right hand corner of my computer. It said a Trojan was trying to access my computer, or something to that extent. It prompted me to click the shield to begin anti-virus scanning. It turns out this rogue program is called Antivirus System Pro and is pretty hard to get rid of. After discovering the rogue program, I tried using Fiddler and got the following error: [Fiddler] Connection to Gateway failed. Exception Text: No connection could be made because the target machine actively refused it 127.0.0.1:5555 I ended up purchasing SpyDoctor + Antivirus, which I'm told is designed specifically for getting rid of these types of programs. Anyway, I did a quick-scan last night with spydoctor and malware bytes. Malware picked up 2 files, and Spydoctor found 4. Most were insignificant, but it did find a worm called Worm.Alcra.F, which was labeled high-priority. I don’t know if that’s the Anti-Virus Pro or not, but SpyDoctor said it got rid of all of those successfully. I tried to run Fiddler again before leaving home, but was still getting the "gateway failed" error. Im using the newest version of firefox. When I initially set up the Fiddler 2.2.8.6, I couldn’t get it to run at first, so I found this faq on the internet that said I needed to go through ToolsOptionsSettings and set up an HTTP Proxy to 127.0.0.1 and my Port to 8888. Once I set that up and downloaded this fiddler helper as a firefox add-on, it worked fine. When I turn on fiddler, it automatically takes my proxy setting from no proxy (default) to the 127.0.0.1 with Port 8888 set up. It worked fine until my computer detected this virus. Anyway, hopefully I've given you sufficient information to offer me your best advice here. Like I said, Spydoctor says the bad stuff is gone, so maybe the rogue program made some type of change in my fiddler that I could just reset or uncheck or something like that? Or will I need to completely remove fiddler and those dat files and rar files I downloaded? Any help would be greatly appreciated. Thanks for your time.

    Read the article

  • Why do some games randomly turn my screen a random solid color?

    - by Emlena.PhD
    When playing some games my computer will randomly have an error that I cannot fix without turning it off and back on again. The screen changes to one solid color, which varies (off the top of my head I can remember seeing solid green, magenta, etc..) and the sound blares a single tone. The sound sometimes briefly restores and I can still hear the game sounds and even hear and still be heard by people in my Mumble channel, but the screen doesn't right itself so I'm still blind. What's more is this happens in some games but not in others. While the game is actually running, not while I'm still in the menu. However, it does happen if I'm afk or idle but the game world is still rendering. Games where the error occurs: League of Legends World of Warcraft Trine The Sims 2 Dungeon Defenders Safe games: games where it has never occurred: Tribes: Ascend Star Wars: the Old Republic Battlefield 3 So relatively older games cause the problem while newer games do not? I cannot predict when it will happen, it just seems random. However, if it happens and I try playing the same game further after restart it does appear to occur more frequently after the first time. But if I switch to a safe game it doesn't continue happening. Both of my RAM sticks appear fine, flipped position or either one on their own and games still run, computer still boots. I would think over-heating, but then why not all games? ALso, sometimes it happens immediately after I start playing, within seconds of the 3D world booting up. I'm looking to upgrade very soon so I want to figure out what component or software is fubar and replace/repair it. Any suggestions or recommendations of tools would be helpful. Below is some system information. Dxdiag does not detect any problems. Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120305-1505) System Manufacturer: Gigabyte Technology Co., Ltd. System Model: EP45-UD3R BIOS: Award Modular BIOS v6.00PG Processor: Intel(R) Core(TM)2 Duo CPU E8500 @ 3.16GHz (2 CPUs), ~3.2GHz Memory: 4096MB RAM DirectX Version: DirectX 11 DxDiag Version: 6.01.7601.17514 64bit Unicode Graphics card name: NVIDIA GeForce GTX 285 Driver Version: 8.17.12.9610 (error has occurred w/several driver versions) Sound: I do not have a sound card, been using motherboard's built in sound)

    Read the article

  • Syncronizing XML file with MySQL database

    - by Fred K
    My company uses an internal management software for storing products. They want to transpose all the products in a MySql database so they can do available their products on the company website. Notice: they will continue to use their own internal software. This software can exports all the products in various file format (including XML). The syncronization not have to be in real time, they are satisfied to syncronize the MySql database once a day (late night). Also, each product in their software has one or more images, then I have to do available also the images on the website. Here is an example of an XML export: <?xml version="1.0" encoding="UTF-8"?> <export_management userid="78643"> <product id="1234"> <version>100</version> <insert_date>2013-12-12 00:00:00</insert_date> <warrenty>true</warrenty> <price>139,00</price> <model> <code>324234345</code> <model>Notredame</model> <color>red</color> <size>XL</size> </model> <internal> <color>green</color> <size>S</size> </internal> <options> <s_option>some option</standard_option> <s_option>some option</standard_option> <extra_option>some option</extra> <extra_option>some option</extra> </options> <images> <image> <small>1234_0.jpg</small> </image> <image> <small>1234_1.jpg</small> </image> </images> </product> </export_management> Some ideas for how can I do it? Or if you have better ideas to do that.

    Read the article

  • Detection of battery status totally messed up

    - by Faabiioo
    I already posted this question in the Ubuntu forum and stackOverflow. I forward it here with the hope to find some different opinions about the problem. I have an Acer TravelMate 5730, which is 3 y.o., running Ubuntu 10.04 LTS. One year ago I changed the battery because the old one died. Since then, everything worked like a charm. A week ago I was using my laptop running on battery; it was charged up to 60%. Suddenly it shut down and for about 24h it was like the battery was totally broken: it didn't charge anymore and the 'upower --dump' said state: critical. I was kind of resigned to buy a new battery, when suddenly the orange light became green: battery was charged and actually working; strangely the battery indicator was stuck to 100%, even after 2 hours running. I tried again with 'upower --dump' or 'acpi -b' commands and it kept saying battery is discharging, though maintaining the percentage to 100%. Thus, battery working fine up to 3 hours, without any warning when it was almost empty, likely to result in a brute shut down. Today something different. the 'upower --dump' command says: ... present: yes rechargeable: yes state: fully-charged energy: 0 Wh energy-empty: 0 Wh energy-full: 65.12 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 14.481 V percentage: 0% capacity: 100% technology: lithium-ion I tried to boot WinXP and the problem is pretty much the same, with the battery fully-charged, percentage equal to 0% and no way to fix it. While writing, the situation has changed again: present: yes rechargeable: yes state: charging energy: 0 Wh energy-empty: 0 Wh energy-full: 65.12 Wh energy-full-design: 65.12 Wh energy-rate: 0 W voltage: 14.474 V percentage: 0% capacity: 100% technology: lithium-ion ...charging, but it does not charge up. (Recall, the battery lasted 3 hours until yesterday!). So, the big question is: is it an hardware issue, like a dedicated internal circuit is broken? or maybe it is just the battery that must be changed. Or, rather, some BIOS problem that could be fixed in some way. I'd appreciate every help that can shed some light on this annoying problem thanks

    Read the article

  • [CentOS 4.8] nslookup resolves domains to IPs, but I can't get a response to pings to external servers

    - by Beco
    I have a fresh install of CentOS 4.8 running on an internal development server. I haven't done anything to it besides setting up sudoers and SSH. I can SSH into the server and from there resolve domains to IPs and ping internal servers, but for some reason I don't get any response from pinging external servers. The software firewall is disabled, and the problem is present with both static and DHCP-assigned network configurations. The network domain controller is a Windows Server 2003 box. $ nslookup google.com Server: 10.254.2.5 Address: 10.254.2.5#53 Non-authoritative answer: Name: google.com Address: 74.125.47.147 Name: google.com Address: 74.125.47.99 <etc...> 10.254.2.5 is the Win2K3 server. $ ping google.com PING google.com (74.125.47.106) 56(84) bytes of data. It just hangs here indefinitely. $ cat /etc/resolv.conf ; generated by /sbin/dhclient-script search <...snip...>.local nameserver 10.254.2.5 nameserver 10.254.2.124 10.254.2.124 is the backup DC server, which is currently off and tombstoned by this point. The snipped section is our company name. # ifconfig eth0 Link encap:Ethernet HWaddr <snip> inet addr:10.254.2.101 Bcast:10.254.2.255 Mask:255.255.255.0 inet6 addr: <snip>/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80066 errors:0 dropped:0 overruns:0 frame:0 TX packets:4421 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:7810133 (7.4 MiB) TX bytes:590550 (576.7 KiB) Interrupt:225 Base address:0xc000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:32 errors:0 dropped:0 overruns:0 frame:0 TX packets:32 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8104 (7.9 KiB) TX bytes:8104 (7.9 KiB) # route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.254.2.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0 0.0.0.0 10.254.2.5 0.0.0.0 UG 0 0 0 eth0 And, for good measure, a snapshot of the current ethernet config via the system-config-network GUI. Edit: I don't yet have enough rep to post images, so here's a link. Sorry! system-config-network snapshot I'm pretty green when it comes to setting up *nix dev servers and network configuration in general, so please let me know if I've left out critical information, or posted information I shouldn't have posted. Thanks!

    Read the article

  • Why keylistener is not working here?

    - by swift
    i have implemented keylistener interface and implemented all the needed methods but when i press the key nothing happens here, why? package swing; import java.awt.Color; import java.awt.Dimension; import java.awt.Graphics; import java.awt.Graphics2D; import java.awt.GridLayout; import java.awt.Point; import java.awt.RenderingHints; import java.awt.event.ActionEvent; import java.awt.event.ActionListener; import java.awt.event.KeyEvent; import java.awt.event.KeyListener; import java.awt.event.MouseEvent; import java.awt.event.MouseListener; import java.awt.event.MouseMotionListener; import java.awt.event.WindowAdapter; import java.awt.event.WindowEvent; import java.awt.image.BufferedImage; import javax.swing.BorderFactory; import javax.swing.BoxLayout; import javax.swing.ImageIcon; import javax.swing.JButton; import javax.swing.JFrame; import javax.swing.JLayeredPane; import javax.swing.JPanel; import javax.swing.JTextArea; class Paper extends JPanel implements MouseListener,MouseMotionListener,ActionListener,KeyListener { static BufferedImage image; String shape; Color color=Color.black; Point start; Point end; Point mp; Button elipse=new Button("elipse"); int x[]=new int[50]; int y[]=new int[50]; Button rectangle=new Button("rect"); Button line=new Button("line"); Button roundrect=new Button("roundrect"); Button polygon=new Button("poly"); Button text=new Button("text"); ImageIcon erasericon=new ImageIcon("images/eraser.gif"); JButton erase=new JButton(erasericon); JButton[] colourbutton=new JButton[9]; String selected; Point label; String key; int ex,ey;//eraser //DatagramSocket dataSocket; JButton button = new JButton("test"); JLayeredPane layerpane; Point p=new Point(); int w,h; public Paper() { JFrame frame=new JFrame("Whiteboard"); frame.setVisible(true); frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setSize(640, 480); frame.setBackground(Color.black); layerpane=frame.getLayeredPane(); setWidth(539,444); setBounds(69,0,555,444); layerpane.add(this,new Integer(2)); layerpane.add(this.addButtons(),new Integer(0)); setLayout(null); setOpaque(false); addMouseListener(this); addMouseMotionListener(this); setFocusable(true); addKeyListener(this); System.out.println(isFocusable()); setBorder(BorderFactory.createLineBorder(Color.black)); } public void paintComponent(Graphics g) { try { super.paintComponent(g); g.drawImage(image, 0, 0, this); Graphics2D g2 = (Graphics2D)g; if(color!=null) g2.setPaint(color); if(start!=null && end!=null) { if(selected==("elipse")) g2.drawOval(start.x, start.y,(end.x-start.x),(end.y-start.y)); else if(selected==("rect")) g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("rrect")) g2.drawRoundRect(start.x, start.y, (end.x-start.x),(end.y-start.y),11,11); else if(selected==("line")) g2.drawLine(start.x,start.y,end.x,end.y); else if(selected==("poly")) g2.drawPolygon(x,y,2); } } catch(Exception e) {} } //Function to draw the shape on image public void draw() { Graphics2D g2 = image.createGraphics(); g2.setPaint(color); if(start!=null && end!=null) { if(selected=="line") g2.drawLine(start.x, start.y, end.x, end.y); else if(selected=="elipse") g2.drawOval(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected=="rect") g2.drawRect(start.x, start.y, (end.x-start.x),(end.y-start.y)); else if(selected==("rrect")) g2.drawRoundRect(start.x, start.y, (end.x-start.x),(end.y-start.y),11,11); else if(selected==("poly")) g2.drawPolygon(x,y,2); } if(label!=null) { JTextArea textarea=new JTextArea(); if(selected==("text")) { textarea.setBounds(label.x, label.y, 50, 50); textarea.setMaximumSize(new Dimension(100,100)); textarea.setBackground(new Color(237,237,237)); add(textarea); g2.drawString("key",label.x,label.y); } } start=null; repaint(); g2.dispose(); } public void text() { System.out.println(label); } //Function which provides the erase functionality public void erase() { Graphics2D pic=(Graphics2D) image.getGraphics(); Color erasecolor=new Color(237,237,237); pic.setPaint(erasecolor); if(start!=null) pic.fillRect(start.x, start.y, 10, 10); } //To set the size of the image public void setWidth(int x,int y) { System.out.println("("+x+","+y+")"); w=x; h=y; image = new BufferedImage(w, h, BufferedImage.TYPE_INT_ARGB); } //Function to add buttons into the panel, calling this function returns a panel public JPanel addButtons() { JPanel buttonpanel=new JPanel(); buttonpanel.setMaximumSize(new Dimension(70,70)); JPanel shape=new JPanel(); JPanel colourbox=new JPanel(); shape.setLayout(new GridLayout(4,2)); shape.setMaximumSize(new Dimension(70,140)); colourbox.setLayout(new GridLayout(3,3)); colourbox.setMaximumSize(new Dimension(70,70)); buttonpanel.setLayout(new BoxLayout(buttonpanel,BoxLayout.Y_AXIS)); elipse.addActionListener(this); elipse.setToolTipText("Elipse"); rectangle.addActionListener(this); rectangle.setToolTipText("Rectangle"); line.addActionListener( this); line.setToolTipText("Line"); erase.addActionListener(this); erase.setToolTipText("Eraser"); roundrect.addActionListener(this); roundrect.setToolTipText("Round rect"); polygon.addActionListener(this); polygon.setToolTipText("Polygon"); text.addActionListener(this); text.setToolTipText("Text"); shape.add(elipse); shape.add(rectangle); shape.add(line); shape.add(erase); shape.add(roundrect); shape.add(polygon); shape.add(text); buttonpanel.add(shape); for(int i=0;i<9;i++) { colourbutton[i]=new JButton(); colourbox.add(colourbutton[i]); if(i==0) colourbutton[0].setBackground(Color.black); else if(i==1) colourbutton[1].setBackground(Color.white); else if(i==2) colourbutton[2].setBackground(Color.red); else if(i==3) colourbutton[3].setBackground(Color.orange); else if(i==4) colourbutton[4].setBackground(Color.blue); else if(i==5) colourbutton[5].setBackground(Color.green); else if(i==6) colourbutton[6].setBackground(Color.pink); else if(i==7) colourbutton[7].setBackground(Color.magenta); else if(i==8) colourbutton[8].setBackground(Color.cyan); colourbutton[i].addActionListener(this); } buttonpanel.add(colourbox); buttonpanel.setBounds(0, 0, 70, 210); return buttonpanel; } public void mouseClicked(MouseEvent e) { if(selected=="text") { label=new Point(); label=e.getPoint(); draw(); } } @Override public void mouseEntered(MouseEvent arg0) { } public void mouseExited(MouseEvent arg0) { } public void mousePressed(MouseEvent e) { if(selected=="line"||selected=="erase"||selected=="text") { start=e.getPoint(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { mp = e.getPoint(); } else if(selected=="poly") { x[0]=e.getX(); y[0]=e.getY(); } } public void mouseReleased(MouseEvent e) { if(start!=null) { if(selected=="line") { end=e.getPoint(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); } else if(selected=="poly") { x[1]=e.getX(); y[1]=e.getY(); } draw(); } } public void mouseDragged(MouseEvent e) { if(end==null) end = new Point(); if(start==null) start = new Point(); if(selected=="line") { end=e.getPoint(); } else if(selected=="erase") { start=e.getPoint(); erase(); } else if(selected=="elipse"||selected=="rect"||selected=="rrect") { start.x = Math.min(mp.x,e.getX()); start.y = Math.min(mp.y,e.getY()); end.x = Math.max(mp.x,e.getX()); end.y = Math.max(mp.y,e.getY()); } else if(selected=="poly") { x[1]=e.getX(); y[1]=e.getY(); } repaint(); } public void mouseMoved(MouseEvent arg0) {} public void actionPerformed(ActionEvent e) { if(e.getSource()==elipse) selected="elipse"; else if(e.getSource()==line) selected="line"; else if(e.getSource()==rectangle) selected="rect"; else if(e.getSource()==erase) { selected="erase"; System.out.println(selected); erase(); } else if(e.getSource()==roundrect) selected="rrect"; else if(e.getSource()==polygon) selected="poly"; else if(e.getSource()==text) selected="text"; if(e.getSource()==colourbutton[0]) color=Color.black; else if(e.getSource()==colourbutton[1]) color=Color.white; else if(e.getSource()==colourbutton[2]) color=Color.red; else if(e.getSource()==colourbutton[3]) color=Color.orange; else if(e.getSource()==colourbutton[4]) color=Color.blue; else if(e.getSource()==colourbutton[5]) color=Color.green; else if(e.getSource()==colourbutton[6]) color=Color.pink; else if(e.getSource()==colourbutton[7]) color=Color.magenta; else if(e.getSource()==colourbutton[8]) color=Color.cyan; } @Override public void keyPressed(KeyEvent e) { System.out.println("pressed"); } @Override public void keyReleased(KeyEvent e) { System.out.println("key released"); } @Override public void keyTyped(KeyEvent e) { System.out.println("Typed"); } public static void main(String[] a) { new Paper(); } } class Button extends JButton { String name; public Button(String name) { this.name=name; } public void paintComponent(Graphics g) { super.paintComponent(g); Graphics2D g2 = (Graphics2D)g; g2.setRenderingHint(RenderingHints.KEY_ANTIALIASING, RenderingHints.VALUE_ANTIALIAS_ON); //g2.setStroke(new BasicStroke(1.2f)); if (name == "line") g.drawLine(5,5,30,30); if (name == "elipse") g.drawOval(5,7,25,20); if (name== "rect") g.drawRect(5,5,25,23); if (name== "roundrect") g.drawRoundRect(5,5,25,23,10,10); int a[]=new int[]{20,9,20,23,20}; int b[]=new int[]{9,23,25,20,9}; if (name== "poly") g.drawPolyline(a, b, 5); if (name== "text") g.drawString("Text",5, 22); } }

    Read the article

  • Google Rules for Retail

    - by David Dorf
    In the book What Would Google Do?, Jeff Jarvis outlines ten "Google Rules" that define how Google acts.  These rules help define how Web 2.0 businesses operate today and into the future.  While there's a chapter in the book on applying these rules to the retail industry, it wasn't very in-depth.  So I've decided to more directly apply the rules to retail, along with some notable examples of success.  The table below shows Jeff's Google Rule, some Industry Examples, and New Retailer Rules that I created. Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} table.MsoTableGrid {mso-style-name:"Table Grid"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-priority:59; mso-style-unhide:no; border:solid black 1.0pt; mso-border-themecolor:text1; mso-border-alt:solid black .5pt; mso-border-themecolor:text1; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-border-insideh:.5pt solid black; mso-border-insideh-themecolor:text1; mso-border-insidev:.5pt solid black; mso-border-insidev-themecolor:text1; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Google Rule Industry Examples New Retailer Rule New Relationship Your worst customer is your friend; you best customer is your partner Newegg.com lets manufacturers respond to customer comments that are critical of the product, and their EggXpert site lets customers help other customers. Listen to what your customers are saying about you.  Convert the critics to fans and the fans to influencers. New Architecture Join a network; be a platform Tesco and BestBuy released APIs for their product catalogs so third-parties could create new applications. Become a destination for information. New Publicness Life is public, so is business Zappos and WholeFoods founders are prolific tweeters/bloggers, sharing their opinions and connecting to customers.  It's not always pretty, but it's genuine. Be transparent.  Share both your successes and failures with your customers. New Society Elegant organization Wet Seal helps their customers assemble outfits and show them off to each other.  Barnes & Noble has a community site that includes a bookclub. Communities of your customers already exist, so help them organize better. New Economy Mass market is dead; long live the mass of niches lululemon found a niche for yoga inspired athletic wear.  Threadless uses crowd-sourcing to design short-runs of T-shirts. Serve small markets with niche products. New Business Reality Decide what business you're in When Lowes realized catering to women brought the men along, their sales increased. Customers want experiences to go with the products they buy. New Attitude Trust the people and listen In 2008 Starbucks launched MyStartbucksIdea to solicit ideas from their customers. Use social networks as additional data points for making better merchandising decisions. New Ethic Be honest and transparent; don't be evil Target is giving away reusable shopping bags for Earth Day.  Kohl's has outfitted 67 stores with solar arrays. Being green earns customers' respect and lowers costs too. New Speed Life is live H&M and Zara keep up with fashion trends. Be prepared to pounce on you customers' fickle interests. New Imperatives Encourage, enable and protect innovation 1-800-Flowers was the first do sales in Facebook and an early adopter of mobile commerce.  The Sears Personal Shopper mobile app finds products based on a photo. Give your staff permission to fail so innovation won't be stifled. Jeff will be a keynote speaker at Crosstalk, our upcoming annual user conference, so I'm looking forward to hearing more of his perspective on retail and the new economy.

    Read the article

  • Blending the Sketchflow Action

    - by GeekAgilistMercenary
    Started a new Sketchflow Prototype in Expression Blend recently and documented each of the steps.  This blog entry covers some of those steps, which are the basic elements of any prototype.  I will have more information regarding design, prototype creation, and the process of the initial phases for development in the future.  For now, I hope you enjoy this short walk through.  Also, be sure to check out my last quick entry on Sketchflow. I started off with a Sketchflow Project, just like I did in my previous entry (more specifics in that entry about how to manipulate and build out the Sketchflow Map). Once I created the project I setup the following Sketchflow Map. The CoreNavigation is a ComponentScreen setup solely for the page navigation at the top of the screen.  The XAML markup in case you want to create a Component Screen with the same design is included below. <UserControl xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" mc:Ignorable="d" xmlns:i="clr-namespace:System.Windows.Interactivity;assembly=System.Windows.Interactivity" xmlns:pb="clr-namespace:Microsoft.Expression.Prototyping.Behavior;assembly=Microsoft.Expression.Prototyping.Interactivity" x:Class="RapidPrototypeSketchScreens.CoreNavigation" d:DesignWidth="624" d:DesignHeight="49" Height="49" Width="624">   <Grid x:Name="LayoutRoot"> <TextBlock HorizontalAlignment="Stretch" Margin="307,3,0,0" Style="{StaticResource TitleCenter-Sketch}" Text="Aütøchart Scorecards" TextWrapping="Wrap"> <i:Interaction.Triggers> <i:EventTrigger EventName="MouseLeftButtonDown"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1"/> </i:EventTrigger> </i:Interaction.Triggers> </TextBlock> <Button HorizontalAlignment="Left" Margin="164,8,0,11" Style="{StaticResource Button-Sketch}" Width="144" Content="Scorecard"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_2"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> <Button HorizontalAlignment="Left" Margin="8,8,0,11" Style="{StaticResource Button-Sketch}" Width="152" Content="Standard Reports"> <i:Interaction.Triggers> <i:EventTrigger EventName="Click"> <pb:NavigateToScreenAction TargetScreen="RapidPrototypeSketchScreens.Screen_1_1"/> </i:EventTrigger> </i:Interaction.Triggers> </Button> </Grid> </UserControl> Now that the CoreNavigation Component Screen is done I built out each of the others.  In each of those screens I included the CoreNavigation Screen (all those little green lines in the image) as the top navigation.  In order to do that, as I created each of the pages I would hover over the CoreNavigation Object in the Sketchflow Map.  When the utilities drawer (the small menu that pops down under a node when you hover over it) shows click on the third little icon and drag it onto the page node you want a navigation screen on. Once I created all the screens I setup the navigation by opening up each screen and right clicking on the objects that needed to point to somewhere else in the prototype. Once I was done with the main page, my Home Navigation Page, it looked something like this in the Expression Blend Designer. I fleshed out each of the additional screens.  Once I was done I wanted to try out the deployment package.  The way to deploy a Sketchflow Prototype is to merely click on File –> Package SketchFlow Project and a prompt will appear.  In the prompt enter what you want the package to be called. I like to see the files generated afterwards too, so I checked the box to see that.  When Expression Blend is done generating everything you’ll have a directory like the one shown below, with all the needed files for deployment. Now these files can be copied or moved to any location for viewing.  One can even copy them (such as via FTP) to a server location to share with others.  Once they are deployed and you run the "TestPage.html" the other features of the Sketchflow Package are available. In the image below I have tagged a few sections to show the Sketchflow Player Features.  To the top left is the navigation, which provides a clearly defined area of movement in a list.  To the center right is the actual prototype application.  I have placed lists of things and made edits.  On the left hand side is the highlight feature, which is available in the Feedback section of the lower left.  On the right hand list I underlined the Autochart with an orange marker, and marked out two list items with a red marker. In the lower left hand side in the Feedback section is also an area to type in your feedback.  This can be useful for time based feedback, when you post this somewhere and want people to provide subsequent follow up feedback. Overall lots of great features, that enable some fairly rapid prototyping with customers.  Once one is familiar with the steps and parts of this Sketchflow Prototype Capabilities it is easy to step through an application without even stopping.  It really is that easy.  So get hold of Expression Blend 3 and get ramped up on Sketchflow, it will pay off in the design phases to do so! Original Entry

    Read the article

  • How to Animate Text and Objects in PowerPoint 2010

    - by DigitalGeekery
    Are you looking for an eye catching way to keep your audience interested in your PowerPoint presentations? Today we’ll take a look at how to add animation effects to objects in PowerPoint 2010. Select the object you wish to animate and then click the More button in the Animation group of the Animation tab.   Animations are grouped into four categories. Entrance effects, Exit effects, Emphasis effects, and Motion Paths. You can get a Live Preview of how the animation will look by hovering your mouse over an animation effect.   When you select a Motion Path, your object will move along the dashed path line as shown on the screen. (This path is not displayed in the final output) Certain aspects of the Motion Path effects are editable. When you apply a Motion Path animation to an object, you can select the path and drag the end to change the length or size of the path. The green marker along the motion path marks the beginning of the  path and the red marks the end. The effects can be rotated by clicking and the bar near the center of the effect.   You can display additional effects by choosing one of the options at the bottom. This will pop up a Change Effect window. If you have Preview Effect checked at the lower left you can preview the effects by single clicking.   Apply Multiple Animations to an Object Select the object and then click the Add Animation button to display the animation effects. Just as we did with the first effect, you can hover over to get a live preview. Click to apply the effect. The animation effects will happen in the order they are applied. Animation Pane You can view a list of the animations applied to a slide by opening the Animation Pane. Select the Animation Pane button from the Advanced Animation group to display the Animation Pane on the right. You’ll see that each animation effect in the animation pane has an assigned number to the left.    Timing Animation Effects You can change when your animation starts to play. By default it is On Click. To change it, select the effect in the Animation Pane and then choose one of the options from the Start dropdown list. With Previous starts at the same time as the previous animation and After Previous starts after the last animation. You can also edit the duration that the animations plays and also set a delay.   You can change the order in which the animation effects are applied by selecting the effect in the animation pane and clicking Move Earlier or Move Later from the Timing group on the Animation tab. Effect Options If the Effect Options button is available when your animation is selected, then that particular animation has some additional effect settings that can be configured. You can access the Effect Option by right-clicking on the the animation in the Animation Pane, or by selecting Effect Options on the ribbon.   The available options will vary by effect and not all animation effects will have Effect Options settings. In the example below, you can change the amount of spinning and whether the object will spin clockwise or counterclockwise.   Under Enhancements, you can add sound effects to your animation. When you’re finished click OK.   Animating Text Animating Text works the same as animating an object. Simply select your text box and choose an animation. Text does have some different Effect Options. By selecting a sequence, you decide whether the text appears as one object, all at once, or by paragraph. As is the case with objects, there will be different available Effect Options depending on the animation you choose. Some animations, such as the Fly In animation, will have directional options.   Testing Your Animations Click on the Preview button at any time to test how your animations look. You can also select the Play button on the Animation Pane. Conclusion Animation effects are a great way to focus audience attention on important points and hold viewers interest in your PowerPoint presentations. Another cool way to spice up your PPT 2010 presentations is to add video from the web. What tips do you guys have for making your PowerPoint presentations more interesting? Similar Articles Productive Geek Tips Center Pictures and Other Objects in Office 2007 & 2010Preview Before You Paste with Live Preview in Office 2010Embed True Type Fonts in Word and PowerPoint 2007 DocumentsHow to Add Video from the Web in PowerPoint 2010Add Artistic Effects to Your Pictures in Office 2010 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Snagit 10 24 Million Sites Windows Media Player Glass Icons (icons we like) How to Forecast Weather, without Gadgets Outlook Tools, one stop tweaking for any Outlook version Zoofs, find the most popular tweeted YouTube videos Video preview of new Windows Live Essentials

    Read the article

  • Adopting DBVCS

    - by Wes McClure
    Identify early adopters Pick a small project with a small(ish) team.  This can be a legacy application or a green-field application. Strive to find a team of early adopters that will be eager to try something new. Get the team on board! Research Research the tool(s) that you want to use.  Some tools provide all of the features you would need while some only provide a slice of the pie.  DBVCS requires the ability to manage a set of change scripts that update a database from one version to the next.  Ideally a tool can track database versions and automatically apply updates.  The change script generation process can be manual, but having diff tools available to automatically generate it can really reduce the overhead to adoption.  Finally, an automated tool to generate a script file per database object is an added bonus as your version control system can quickly identify what was changed in a commit (add/del/modify), just like with code changes. Don’t settle on just one tool, identify several.  Then work with the team to evaluate the tools.  Have the team do some tests of the following scenarios with each tool: Baseline an existing database: can the migration tool work with legacy databases?  Caution: most migration platforms do not support baselines or have poor support, especially the fad of fluent APIs. Add/drop tables Add/drop procedures/functions/views Alter tables (rename columns, add columns, remove columns) Massage data – migrations sometimes involve changing data types that cannot be implicitly casted and require you to decide how the data is explicitly cast to the new type.  This is a requirement for a migrations platform.  Think about a case where you might want to combine fields, or move a field from one table to another, you wouldn’t want to lose the data. Run the tool via the command line.  If you cannot automate the tool in Continuous Integration what is the point? Create a copy of a database on demand. Backup/restore databases locally. Let the team give feedback and decide together, what tool they would like to try out. My recommendation at this point would be to include TSqlMigrations and RoundHouse as SQL based migration platforms.  In general I would recommend staying away from the fluent platforms as they often lack baseline capabilities and add overhead to learn a new API when SQL is already a very well known DSL.  Code migrations often get messy with procedures/views/functions as these have to be created with SQL and aren’t cross platform anyways.  IMO stick to SQL based migrations. Reconciling Production If your project is a legacy application, you will need to reconcile the current state of production with your development databases.  Find changes in production and bring them down to development, even if they are old and need to be removed.  Once complete, produce a baseline of either dev or prod as they are now in sync.  Commit this to your VCS of choice. Add whatever schema changes tracking mechanism your tool requires to your development database.  This often requires adding a table to track the schema version of that database.  Your tool should support doing this for you.  You can add this table to production when you do your next release. Script out any changes currently in dev.  Remove production artifacts that you brought down during reconciliation.  Add change scripts for any outstanding changes in dev since the last production release.  Commit these to your repository.   Say No to Shared Dev DBs Simply put, you wouldn’t dream of sharing a code checkout, why would you share a development database?  If you have a shared dev database, back it up, distribute the backups and take the shared version offline (including the dev db server once all projects are using DB VCS).  Doing DB VCS with a shared database is bound to cause problems as people won’t be able to easily script out their own changes from those that others are working on.   First prod release Copy prod to your beta/testing environment.  Add the schema changes table (or mechanism) and do a test run of your changes.  If successful you can schedule this to be run on production.   Evaluation After your first release, evaluate the pain points of the process.  Try to find tools or modifications to existing tools to help fix them.  Don’t leave stones unturned, iteratively evolve your tools and practices to make the process as seamless as possible.  This is why I suggest open source alternatives.  Nothing is set in stone, a good example was adding transactional support to TSqlMigrations.  We ran into situations where an update would break a database, so I added a feature to do transactional updates and rollback on errors!  Another good example is generating change scripts.  We have been manually making these for months now.  I found an open source project called Open DB Diff and integrated this with TSqlMigrations.  These were things we just accepted at the time when we began adopting our tool set.  Once we became comfortable with the base functionality, it was time to start automating more of the process.  Just like anything else with development, never be afraid to try to find tools to make your job easier!   Enjoy -Wes

    Read the article

  • Using CMS for App Configuration - Part 1, Deploying Umbraco

    - by Elton Stoneman
    Originally posted on: http://geekswithblogs.net/EltonStoneman/archive/2014/06/04/using-cms-for-app-configurationndashpart-1-deploy-umbraco.aspxSince my last post on using CMS for semi-static API content, How about a new platform for your next API… a CMS?, I’ve been using the idea for centralized app configuration, and this post is the first in a series that will walk through how to do that, step-by-step. The approach gives you a platform-independent, easily configurable way to specify your application configuration for different environments, with a built-in approval workflow, change auditing and the ability to easily rollback to previous settings. It’s like Azure Web and Worker Roles where you can specify settings that change at runtime, but it's not specific to Azure - you can use it for any app that needs changeable config, provided it can access the Internet. The series breaks down into four posts: Deploying Umbraco – the CMS that will store your configurable settings and the current values; Publishing your config – create a document type that encapsulates your settings and a template to expose them as JSON; Consuming your config – in .NET, a simple client that uses dynamic objects to access settings; Config lifecycle management – how to publish, audit, and rollback settings. Let’s get started. Deploying Umbraco There’s an Umbraco package on Azure Websites, so deploying your own instance is easy – but there are a couple of things to watch out for, so this step-by-step will put you in a good place. Create From Gallery The easiest way to get started is with an Azure subscription, navigate to add a new Website and then Create From Gallery. Under CMS, you’ll see an Umbraco package (currently at version 7.1.3): Configure Your App For high availability and scale, you’ll want your CMS on separate kit from anything else you have in Azure, so in the configuration of Umbraco I’d create a new SQL Azure database – which Umbraco will use to store all its content: You can use the free 20mb database option if you don’t have demanding NFRs, or if you’re just experimenting. You’ll need to specify a password for a SQL Server account which the Umbraco service will use, and changing from the default username umbracouser is probably wise. Specify Database Settings You can create a new database on an existing server if you have one, or create new. If you create a new server *do not* use the same username for the database server login as you used for the Umbraco account. If you do, the deployment will fail later. Think of this as the SQL Admin account that you can use for managing the db, the previous account was the service account Umbraco uses to connect. Make Tea If you have a fast kettle. It takes about two minutes for Azure to create and provision the website and the database. Install Umbraco So far we’ve deployed an empty instance of Umbraco using the Azure package, and now we need to browse to the site and complete installation. My Website was called my-app-config, so to complete installation I browse to http://my-app-config.azurewebsites.net:   Enter the credentials you want to use to login – this account will have full admin rights to the Umbraco instance. Note that between deploying your new Umbraco instance and completing installation in this step, anyone can browse to your website and complete the installation themselves with their own credentials, if they know the URL. Remote possibility, but it’s there. From this page *do not* click the big green Install button. If you do, Umbraco will configure itself with a local SQL Server CE database (.sdf file on the Web server), and ignore the SQL Azure database you’ve carefully provisioned and may be paying for. Instead, click on the Customize link and: Configure Your Database You need to enter your SQL Azure database details here, so you’ll have to get the server name from the Azure Management Console. You don’t need to explicitly grant access to your Umbraco website for the database though. Click Continue and you’ll be offered a “starter” website to install: If you don’t know Umbraco at all (but you are familiar with ASP.NET MVC) then a starter website is worthwhile to see how it all hangs together. But after a while you’ll have a bunch of artifacts in your CMS that you don’t want and you’ll have to work out which you can safely delete. So I’d click “No thanks, I do not want to install a starter website” and give yourself a clean Umbraco install. When it completes, the installation will log you in to the welcome screen for managing Umbraco – which you can access from http://my-app-config.azurewebsites.net/umbraco: That’s It Easy. Umbraco is installed, using a dedicated SQL Azure instance that you can separately scale, sync and backup, and ready for your content. In the next post, we’ll define what our app config looks like, and publish some settings for the dev environment.

    Read the article

  • SharePoint Saturday Michigan 2010 Recap, Slides, and Photos

    - by Brian Jackett
    This past weekend I attended SharePoint Saturday Michigan (SPSMI) in Ann Arbor, Michigan.  For those unfamiliar, SharePoint Saturday is a community driven event where various speakers gather to present at a FREE conference on all topics related to SharePoint.  This made my third SharePoint Saturday attended and second I’ve spoken at.  I believe today it was announced that about 210 people total attended the event.  I was very happy with the turnout, especially the ratio of male to female attendees.  Typically with computer related conferences the ratio leans towards more males attending, but both Peter Serzo (one of conference organizers) and I both commented to each other that at the end of the day it appeared to be close to 40% women in the crowd.  So here’s my recap of the weekend. Arrival     Friday afternoon I drove up from Columbus, OH to Ann Arbor, MI and arrived around 4pm.  I was attempting to avoid the rush hour traffic and construction backups.  Turned out to be a good idea because other speakers coming up Friday got stuck on a highway which literally closed down in both directions due to a bad accident.  I was talking my friend Sean McDonough through the highway closing and this was the first time I had seen a solid black traffic line on Google Maps.  Most of us are familiar with Green, Yellow, and Red, but this line was black if that tells you how bad it got. Speaker “Dinner”     Fast forward a few hours and it was time for the speaker “dinner.”  I put “dinner” in quotes because with this night alone SPSMI set a new bar for nicest and most extravagant speaker appreciation events for SharePoint Saturday.  By tapping into some very influential contacts, the conference organizers were able to provide a truck limo (yep you heard right) with refreshments, access to an underground suite at the Palace of Auburn Hills, and courtside tickets to see the Detroit Pistons play that night.  Being a Michigan native I have to say that I was absolutely floored by this experience and very thankful to our conference organizers Peter, Sebastian, and Jesse along with Trillium Teamologies. Sessions     The actual conference started Saturday morning at 9am with the keynote by Rob Collie who is the Microsoft program manager for PowerPivot.  The day continued and I attended the following sessions: Mike Watson (@mikewat) – “SharePoint 2010 Fight Night: Devs vs. Admins” Karl Swedeberg (@kswedberg) – “A Walk on the Client Side with jQuery“ [my session] Brian Jackett (@briantjackett) - “Real World Deployment of SharePoint 2007 Solutions” Jeff Willinger (@jwillie) - “Social Computing and Collaboration Inside and Outside the 4 Walls” Paul Schaeflein (@paulschaeflein) – “PowerShell for the SharePoint Developer” My Presentation     I had a great time presenting my session on Deploying SharePoint 2007 Solutions, but it wasn’t without its fair share of technical issues.  As my session was right after lunch I came in to my room 10 mins early to set up my laptop, slides, and demos.  As a quick background note, a few months ago I got an upgraded laptop from my company Sogeti and have been dual booting it between XP (factory installed) and Windows Server 2008 R2 w/ Hyper-V.  As such I had prepared all of my demo virtual machines to run under Hyper-V.  About 3 minutes before my session was scheduled to start though it became apparent that I did not have the correct display drivers to connect Windows Server 2008 R2 to the projector…     As you can imagine this was a slight cause for concern as I was potentially going to be unable to give my presentation.  Luckily for me I usually prepare for such unforeseen issues and had my presentation and some spare VMs that would run on XP on my external hard drive.  Knowing this I rebooted my machine into XP and began my presentation without slides until about 5 mins into the session when everything was up and running on XP.  Despite this being the first time I gave this presentation I have to say it was one of my favorites I’ve given so far.  The audience was very engaged in the session and I received some great, positive feedback afterwards.  Thanks to all who attended my session, I appreciate it very much. Link to Presentation Files     For those of you who attended my session and would like my slides or demo PowerShell scripts they can be found on my SkyDrive at the link below.  Also, if you have a few minutes and wouldn’t mind rating my session I have this session posted on SpeakerRate.  As speakers we always appreciate any and all feedback attendees offer, so thank you if you are able to provide any. SkyDrive folder with session files Rate my SharePoint 2007 Solutions session   Picture Albums     For everyone else, here are my pictures from the weekend.  The first link is to my FaceBook album which will have tagging (recommend this one.)  The second is to my Live album if you care for higher resolution images. http://www.facebook.com/album.php?aid=2154482&id=21905041&l=a3fb72ee8c View Full Album Conclusion     A big thank you goes out to all of the organizers, speakers, sponsors, and attendees of SPSMI.  As I’ve said so many times, without each and every one of you these events wouldn’t be possible.  I thoroughly enjoyed this trip back to my home state and presenting a new session.  For those interested in my upcoming schedule I will be giving two sessions on PowerShell at SharePoint Saturday Charlotte in April, helping plan Stir Trek: Iron Man Edition in May, and I’m submitting sessions to Day of .Net Ann Arbor in May as well.  Beyond that I haven’t planned out any travels.  Thanks for reading my recap.  Look forward to more technical posts now that I have a short break in conferences.         -Frog Out   links: Michigan image

    Read the article

  • BizTalk host throttling &ndash; Singleton pattern and High database size

    - by S.E.R.
    Originally posted on: http://geekswithblogs.net/SERivas/archive/2013/06/30/biztalk-host-throttling-ndash-singleton-pattern-and-high-database-size.aspxI have worked for some days around the singleton pattern (for those unfamiliar with it, read this post by Victor Fehlberg) and have come across a few very interesting posts, among which one dealt with performance issues (here, also by Victor Fehlberg). Simply put: if you have an orchestration which implements the singleton pattern, then performances will continuously decrease as the orchestration receives and consumes messages, and that behavior is more obvious when the orchestration never ends (ie : it keeps looping and never terminates or completes). As I experienced the same kind of problem (actually I was alerted by SCOM, which told me that the host was being throttled because of High database size), I thought it would be a good idea to dig a little bit a see what happens deep inside BizTalk and thus understand the reasons for this behavior. NOTE: in this article, I will focus on this High database size throttling condition. I will try and work on the other conditions in some not too distant future… Test conditions The singleton orchestration For the purpose of this study, I have created the following orchestration, which is a very basic implementation of a singleton that piles up incoming messages, then does something else when a certain timeout has been reached without receiving another message: Throttling settings I have two distinct hosts : one that hosts the receive port (basic FILE port) : Ports_ReceiveHostone that hosts the orchestration : ProcessingHost In order to emphasize the throttling mechanism, I have modified the throttling settings for each of these hosts are as follows (all other parameters are set to the default value): [Throttling thresholds] Message count in database: 500 (default value : 50000) Evolution of performance counters when submitting messages Since we are investigating the High database size throttling condition, here are the performance counter that we should take a look at (all of them are in the BizTalk:Message Agent performance object): Database sizeHigh database sizeMessage delivery throttling stateMessage publishing throttling stateMessage delivery delay (ms)Message publishing delay (ms)Message delivery throttling state durationMessage publishing throttling state duration (If you are not used to Perfmon, I strongly recommend that you start using it right now: it is a wonderful tool that allows you to open the hood and see what is going on inside BizTalk – and other systems) Database size It is quite obvious that we will start by watching the database size and high database size counters, just to see when the first reaches the configured threshold (500) and when the second rings the alarm. NOTE : During this test I submitted 600 messages, one message at a time every 10ms to see the evolution of the counters we have previously selected. It might not show very well on this screenshot, but here is what happened: From 15:46:50 to 15:47:50, the database size for the Ports_ReceiveHost host (blue line) kept growing until it reached a maximum of 504.At 15:47:50, the high database size alert fires At first I was surprised by this result: why is it the database size of the receiving host that keeps growing since it is the processing host that piles up messages? Actually, it makes total sense. This counter measures the size of the database queue that is being filled by the host, not consumed. Therefore, the high database size alert is raised on the host that fills the queue: Ports_ReceiveHost. More information is available on the Public MPWiki page. Now, looking at the Message publishing throttling state for the receiving host (green line), we can see that a throttling condition has been reached at 15:47:50: We can also see that the Message publishing delay(ms) (blue line) has begun growing slowly from this point. All of this explains why performances keep decreasing when a singleton keeps processing new messages: the database size grows and when it has exceeded the Message count in database threshold, the host is throttled and the publishing delay keeps increasing. Digging further So, what happens to the database queue then? Is it flushed some day or does it keep growing and growing indefinitely? The real question being: will the host be throttled forever because of this singleton? To answer this question, I set the Message count in database threshold to 20 (this value is very low in order not to wait for too long, otherwise I certainly would have fallen asleep in front of my screen) and I submitted 30 messages. The test was started at 18:26. At 18:56 (ie : exactly 30min later) the throttling was stopped and the database size was divided by 2. 30 min later again, the database size had dropped to almost zero: I guess I’ll have to find some documentation and do some more testing before I sort this out! My guess is that some maintenance job is at work here, though I cannot tell which one Digging even further If we take a look at the Message delivery throttling state counter for the processing host, we can see that this host was also throttled during the submission of the 600 documents: The value for the counter was 1, meaning that Message delivery incoming rate for the host instance exceeds the Message delivery outgoing rate * the specified Rate overdrive factor (percent) value. We will see this another day… :) A last word Let’s end this article with a warning: DO NOT CHANGE THE THROTTLING SETTINGS LIGHTLY! The temptation can be great to just bypass throttling by setting very high values for each parameter (or zero in some cases, which simply disables throttling). Nevertheless, always keep in mind that this mechanism is here for a very good reason: prevent your BizTalk infrastructure from exploding!! So whatever you do with those settings, do a lot of testing and benchmarking!

    Read the article

  • Test-Drive ASP.NET MVC Review

    - by Ben Griswold
    A few years back I started dallying with test-driven development, but I never fully committed to the practice. This wasn’t because I didn’t believe in the value of TDD; it was more a matter of not completely understanding how to incorporate “test first” into my everyday development. Back in my web forms days, I could point fingers at the framework for my ignorance and laziness. After all, web forms weren’t exactly designed for testability so who could blame me for not embracing TDD in those conditions, right? But when I switched to ASP.NET MVC and quickly found myself fresh out of excuses and it became instantly clear that it was time to get my head around red-green-refactor once and for all or I would regretfully miss out on one of the biggest selling points the new framework had to offer. I have previously written about how I learned ASP.NET MVC. It was primarily hands on learning but I did read a couple of ASP.NET MVC books along the way. The books I read dedicated a chapter or two to TDD and they certainly addressed the benefits of TDD and how MVC was designed with testability in mind, but TDD was merely an afterthought compared to, well, teaching one how to code the model, view and controller. This approach made some sense, and I learned a bunch about MVC from those books, but when it came to TDD the books were just a teaser and an opportunity missed.  But then I got lucky – Jonathan McCracken contacted me and asked if I’d review his book, Test-Drive ASP.NET MVC, and it was just what I needed to get over the TDD hump. As the title suggests, Test-Drive ASP.NET MVC takes a different approach to learning MVC as it focuses on testing right from the very start. McCracken wastes no time and swiftly familiarizes us with the framework by building out a trivial Quote-O-Matic application and then dedicates the better part of his book to testing first – first by explaining TDD and then coding a full-featured Getting Organized application inspired by David Allen’s popular book, Getting Things Done. If you are a learn-by-example kind of coder (like me), you will instantly appreciate and enjoy McCracken’s style – its fast-moving, pragmatic and focused on only the most relevant information required to get you going with ASP.NET MVC and TDD. The book continues with the test-first theme but McCracken moves away from the sample application and incorporates other practical skills like persisting models with NHibernate, leveraging Inversion of Control with the IControllerFactory and building a RESTful web service. What I most appreciated about this section was McCracken’s use of and praise for open source libraries like Rhino Mocks, SQLite and StructureMap (to name just a few) and productivity tools like ReSharper, Web Platform Installer and ASP.NET SQL Server Setup Wizard.  McCracken’s emphasis on real world, pragmatic development was clearly demonstrated in every tool choice, straight-forward code block and developer tip. Whether one is already familiar with the tools/tips or not, McCracken’s thought process is easily understood and appreciated. The final section of the book walks the reader through security and deployment – everything from error handling and logging with ELMAH, to ASP.NET Health Monitoring, to using MSBuild with automated builds, to the deployment  of ASP.NET MVC to various web environments. These chapters, like those prior, offer enough information and explanation to simply help you get the job done.  Do I believe Test-Drive ASP.NET MVC will turn you into an expert MVC developer overnight?  Well, no.  I don’t think any book can make that claim.  If that were possible, I think book list prices would skyrocket!  That said, Test-Drive ASP.NET MVC provides a solid foundation and a unique (and dare I say necessary) approach to learning ASP.NET MVC.  Along the way McCracken shares loads of very practical software development tips and references numerous tools and libraries. The bottom line is it’s a great ASP.NET MVC primer – if you’re new to ASP.NET MVC it’s just what you need to get started.  Do I believe Test-Drive ASP.NET MVC will give you everything you need to start employing TDD in your everyday development?  Well, I used to think that learning TDD required a lot of practice and, if you’re lucky enough, the guidance of a mentor or coach.  I used to think that one couldn’t learn TDD from a book alone. Well, I’m still no pro, but I’m testing first now and Jonathan McCracken and his book, Test-Drive ASP.NET MVC, played a big part in making this happen.  If you are an MVC developer and a TDD newb, Test-Drive ASP.NET MVC is just the book for you.

    Read the article

  • Silverlight Firestarter Wrap Up and WCF RIA Services Talk Sample Code

    - by dwahlin
    I had a great time attending and speaking at the Silverlight Firestarter event up in Redmond on December 2, 2010. In addition to getting a chance to hang out with a lot of cool people from Microsoft such as Scott Guthrie, John Papa, Tim Heuer, Brian Goldfarb, John Allwright, David Pugmire, Jesse Liberty, Jeff Handley, Yavor Georgiev, Jossef Goldberg, Mike Cook and many others, I also had a chance to chat with a lot of people attending the event and hear about what projects they’re working on which was awesome. If you didn’t get a chance to look through all of the new features coming in Silverlight 5 check out John Papa’s post on the subject. While at the Silverlight Firestarter event I gave a presentation on WCF RIA Services and wanted to get the code posted since several people have asked when it’d be available. The talk can be viewed by clicking the image below. Code from the talk follows as well as additional links. I had a few people ask about the green bracelet on my left hand since it looks like something you’d get from a waterpark. It was used to get us access down a little hall that led backstage and allowed us to go backstage during the event. I thought it looked kind of dorky but it was required to get through security. Sample Code from My WCF RIA Services Talk (To login to the 2 apps use “user” and “P@ssw0rd”. Make sure to do a rebuild of the projects in Visual Studio before running them.) View All Silverlight Firestarter Talks and Scott Guthrie’s Keynote WCF RIA Services SP1 Beta for Silverlight 4 WCF RIA Services Code Samples (including some SP1 samples) Improved binding support in EntitySet and EntityCollection with SP1 (Kyle McClellan’s Blog) Introducing an MVVM-Friendly DomainDataSource: The DomainCollectionView (Kyle McClellan’s Blog) I’ve had the chance to speak at a lot of conferences but never with as many cameras, streaming capabilities, people watching live and overall hype involved. Over 1000 people registered to attend the conference in person at the Microsoft campus and well over 15,000 to watch it through the live stream.  The event started for me on Tuesday afternoon with a flight up to Seattle from Phoenix. My flight was delayed 1 1/2 hours (I seem to be good at booking delayed flights) so I didn’t get up there until almost 8 PM. John Papa did a tech check at 9 PM that night and I was scheduled for 9:30 PM. We basically plugged in my laptop backstage (amazing number of servers, racks and audio devices back there) and made sure everything showed up properly on the projector and the machines recording the presentation. In addition to a dedicated show director, there were at least 5 tech people back stage and at least that many up in the booth running lights, audio, cameras, and other aspects of the show. I wish I would’ve taken a picture of the backstage setup since it was pretty massive – servers all over the place. I definitely gained a new appreciation for how much work goes into these types of events. Here’s what the room looked like right before my tech check– not real exciting at this point. That’s Yavor Georgiev (who spoke on WCF Services at the Firestarter) in the background. We had plenty of monitors to reference during the presentation. Two monitors for slides (right and left side) and a notes monitor. The 4th monitor showed the time and they’d type in notes to us as we talked (such as “You’re over time!” in my case since I went around 4 minutes over :-)). Wednesday morning I went back on campus at Microsoft and watched John Papa film a few Silverlight TV episodes with Dave Campbell and Ryan Plemons.   Next I had the chance to watch the dry run of the keynote with Scott Guthrie and John Papa. We were all blown away by the demos shown since they were even better than expected. Starting at 1 PM on Wednesday I went over to Building 35 and listened to Yavor Georgiev (WCF Services), Jaime Rodriguez (Windows Phone 7), Jesse Liberty (Data Binding) and Jossef Goldberg and Mike Cook (Silverlight Performance) give their different talks and we all shared feedback with each other which was a lot of fun. Jeff Handley from the RIA Services team came afterwards and listened to me give a dry run of my WCF RIA Services talk. He had some great feedback that I really appreciated getting. That night I hung out with John Papa and Ward Bell and listened to John walk through his keynote demos. I also got a sneak peak of the gift given to Dave Campbell for all his work with Silverlight Cream over the years. It’s a poster signed by all of the key people involved with Silverlight: Thursday morning I got up fairly early to get to the event center by 8 AM for speaker pictures. It was nice and quiet at that point although outside the room there was a huge line of people waiting to get in.     At around 8:30 AM everyone was let in and the main room was filled quickly. Two other overflow rooms in the Microsoft conference center (Building 33) were also filled to capacity. At around 9 AM Scott Guthrie kicked off the event and all the excitement started! From there it was all a blur but it was definitely a lot of fun. All of the sessions for the Silverlight Firestarter were recorded and can be watched here (including the keynote). Corey Schuman, John Papa and I also released 11 lab exercises and associated videos to help people get started with Silverlight. Definitely check them out if you’re interested in learning more! Level 100: Getting Started Lab 01 - WinForms and Silverlight Lab 02 - ASP.NET and Silverlight Lab 03 - XAML and Controls Lab 04 - Data Binding Level 200: Ready for More Lab 05 - Migrating Apps to Out-of-Browser Lab 06 - Great UX with Blend Lab 07 - Web Services and Silverlight Lab 08 - Using WCF RIA Services Level 300: Take me Further Lab 09 - Deep Dive into Out-of-Browser Lab 10 - Silverlight Patterns: Using MVVM Lab 11 - Silverlight and Windows Phone 7

    Read the article

  • PHP OCI8 and Oracle 11g DRCP Connection Pooling in Pictures

    - by christopher.jones
    Here is a screen shot from a PHP OCI8 connection pooling demo that I like to run. It graphically shows how little database host memory is needed when using DRCP connection pooling with Oracle Database 11g. Migrating to DRCP can be as simple as starting the pool and changing the connection string in your PHP application. The script that generated the data for this graph was a simple "Parts" query application being run under various simulated user loads. I was running the database on a small Oracle Linux server with just 2G of memory. I used PHP OCI8 1.4. Apache is in pre-fork mode, as needed for PHP. Each graph has time on the horizontal access in arbitrary 'tick' time units. Click the image to see it full sized. Pooled connections Beginning with the top left graph, At tick time 65 I used Apache's 'ab' tool to start 100 concurrent 'users' running the application. These users connected to the database using DRCP: $c = oci_pconnect('phpdemo', 'welcome', 'myhost/orcl:pooled'); A second hundred DRCP users were added to the system at tick 80 and a final hundred users added at tick 100. At about tick 110 I stopped the test and restarted Apache. This closed all the connections. The bottom left graph shows the number of statements being executed by the database per second, with some spikes for background database activity and some variability for this small test. Each extra batch of users adds another 'step' of load to the system. Looking at the top right Server Process graph shows the database server processes doing the query work for each web user. As user load is added, the DRCP server pool increases (in green). The pool is initially at its default size 4 and quickly ramps up to about (I'm guessing) 35. At tick time 100 the pool increases to my configured maximum of 40 processes. Those 40 processes are doing the query work for all 300 web users. When I stopped the test at tick 110, the pooled processes remained open waiting for more users to connect. If I had left the test quiet for the DRCP 'inactivity_timeout' period (300 seconds by default), the pool would have shrunk back to 4 processes. Looking at the bottom right, you can see the amount of memory being consumed by the database. During the initial quiet period about 500M of memory was in use. The absolute number is just an indication of my particular DB configuration. As the number of pooled processes increases, each process needs more memory. You can see the shape of the memory graph echoes the Server Process graph above it. Each of the 300 web users will also need a few kilobytes but this is almost too small to see on the graph. Non-pooled connections Compare the DRCP case with using 'dedicated server' processes. At tick 140 I started 100 web users who did not use pooled connections: $c = oci_pconnect('phpdemo', 'welcome', 'myhost/orcl'); This connection string change is the only difference between the two tests. At ticks 155 and 165 I started two more batches of 100 simulated users each. At about tick 195 I stopped the user load but left Apache running. Apache then gradually returned to its quiescent state, killing idle httpd processes and producing the downward slope at the right of the graphs as the persistent database connection in each Apache process was closed. The Executions per Second graph on the bottom left shows the same step increases as for the earlier DRCP case. The database is handling this load. But look at the number of Server processes on the top right graph. There is now a one-to-one correspondence between Apache/PHP processes and DB server processes. Each PHP processes has one DB server processes dedicated to it. Hence the term 'dedicated server'. The memory required on the database is proportional to all those database server processes started. Almost all my system's memory was consumed. I doubt it would have coped with any more user load. Summary Oracle Database 11g DRCP connection pooling significantly reduces database host memory requirements allow more system memory to be allocated for the SGA and allowing the system to scale to handled thousands of concurrent PHP users. Even for small systems, using DRCP allows more web users to be active. More information about PHP and DRCP can be found in the PHP Scalability and High Availability chapter of The Underground PHP and Oracle Manual.

    Read the article

  • My History with Agile

    - by Robert May
    I’m going to write my history with Agile here.  That way, in future posts, I can refer back to it, instead of typing it out in the post that contains information you may actually want to read.  Note that I’m actually a pretty senior developer, and do lots of technical interviews.  I’m an Agile fan because of the difference it makes in peoples lives and the improvement in quality it brings, and I’ll sacrifice my technological advance to help teams. Management History I started management pretty early in my career, starting with the first job that I ever had.  I actually do NOT have a CS or similar degree.  I have a Bachelor’s of Business Administration with an emphasis in Computer Information Systems. My first management gigs were around call center work and were very schedule oriented.  I didn’t understand the true value of teams, and I’m ashamed to admit, I actually installed a fingerprint scanner as a time clock in this job.  I shudder to think of the impact that I had on the team spirit.  I didn’t even trust them enough to fill out their time cards correctly.  How sad. I was managing nearly 100 people in this position, with the help of a great set of subordinates. I did try to come up with reward programs for the team, but again, didn’t understand the concept of team, so instead of letting the team determine how the rewards should work, I mandated from on high, which isn’t a good thing. I was told that I wasn’t the type that would be a good manager by people whom I respected a lot.  They said it because I was a computer geek, since they don’t understand good management either, but in retrospect, they were right about me then.  I was too green. After my first job, I went on to other jobs and with the exception of one job, I’ve managed people at them all.  The rest of the management story is important for understanding agile, so I’ll save it for my next post. Technical History I’ve been in software development for many, many years.  I technically started programming on a commodore 64 in basic.  I didn’t know that I was programming, but I was sure having fun.  That was followed by batch files, Gorilla hacking (I always had to win), WordPerfect Macro programming and other things that taught me the basics. My first “real” job was with a telephone company, and that’s where I made my first database application in DataEase, wrote my first VBA app and started using real programming tools, like turbo pascal, vb3-vb5, and semi-real tools like RPG and VisualRPG.  I wrote my first web page in 1994, and built my first data driven web page in 1995 using perlDB.  You really can do anything with Perl.  At this time, I also started a Linux based internet service provider that is still in operation today.  One of the people I worked with is now a Microsoft employee building and designing frameworks you probably know well.  Smart guy.  I also built my first ASP applications connecting to Sql Server 6.5, setup Exchange 5.5 for the company, and many other system administration stuff.  I’m a programmer by choice, mostly because I don’t really like PC support. From there, I went on to a large state agency.  I got to see and maintain true waterfall projects.  5 years of maintaining the 200 VB COM+ (MTS, actually) dlls that were used to calculate a single number is a long time.  That was all Microsoft DNS technologies.  SQL Server and VB6 were the tools of choice, although .net started to be a factor near the end of employment.  I did some heavy XML work at this job and even wrote an XSD parser and validator in VB6 that was a shim until MSXML 3.0 came out.  Prior to 3.0, XSD’s weren’t supported, and I didn’t want to write DTDs. Ironically, jobs after this were more generic.  I pretty much settled in on the .net framework and revisions of it.  Lots of WPF, some silverlight, lots of ASP.NET, some SQL Azure, lots of SQL Server, some Oracle, but I don’t think that I was as passionate about development and technologies.  I was more into the management of development.  I like people. Technorati Tags: Agile,history

    Read the article

  • What is the most efficient way to convert to binary and back in C#?

    - by Saad Imran.
    I'm trying to write a general purpose socket server for a game I'm working on. I know I could very well use already built servers like SmartFox and Photon, but I wan't to go through the pain of creating one myself for learning purposes. I've come up with a BSON inspired protocol to convert the the basic data types, their arrays, and a special GSObject to binary and arrange them in a way so that it can be put back together into object form on the client end. At the core, the conversion methods utilize the .Net BitConverter class to convert the basic data types to binary. Anyways, the problem is performance, if I loop 50,000 times and convert my GSObject to binary each time it takes about 5500ms (the resulting byte[] is just 192 bytes per conversion). I think think this would be way too slow for an MMO that sends 5-10 position updates per second with a 1000 concurrent users. Yes, I know it's unlikely that a game will have a 1000 users on at the same time, but like I said earlier this is supposed to be a learning process for me, I want to go out of my way and build something that scales well and can handle at least a few thousand users. So yea, if anyone's aware of other conversion techniques or sees where I'm loosing performance I would appreciate the help. GSBitConverter.cs This is the main conversion class, it adds extension methods to main datatypes to convert to the binary format. It uses the BitConverter class to convert the base types. I've shown only the code to convert integer and integer arrays, but the rest of the method are pretty much replicas of those two, they just overload the type. public static class GSBitConverter { public static byte[] ToGSBinary(this short value) { return BitConverter.GetBytes(value); } public static byte[] ToGSBinary(this IEnumerable<short> value) { List<byte> bytes = new List<byte>(); short length = (short)value.Count(); bytes.AddRange(length.ToGSBinary()); for (int i = 0; i < length; i++) bytes.AddRange(value.ElementAt(i).ToGSBinary()); return bytes.ToArray(); } public static byte[] ToGSBinary(this bool value); public static byte[] ToGSBinary(this IEnumerable<bool> value); public static byte[] ToGSBinary(this IEnumerable<byte> value); public static byte[] ToGSBinary(this int value); public static byte[] ToGSBinary(this IEnumerable<int> value); public static byte[] ToGSBinary(this long value); public static byte[] ToGSBinary(this IEnumerable<long> value); public static byte[] ToGSBinary(this float value); public static byte[] ToGSBinary(this IEnumerable<float> value); public static byte[] ToGSBinary(this double value); public static byte[] ToGSBinary(this IEnumerable<double> value); public static byte[] ToGSBinary(this string value); public static byte[] ToGSBinary(this IEnumerable<string> value); public static string GetHexDump(this IEnumerable<byte> value); } Program.cs Here's the the object that I'm converting to binary in a loop. class Program { static void Main(string[] args) { GSObject obj = new GSObject(); obj.AttachShort("smallInt", 15); obj.AttachInt("medInt", 120700); obj.AttachLong("bigInt", 10900800700); obj.AttachDouble("doubleVal", Math.PI); obj.AttachStringArray("muppetNames", new string[] { "Kermit", "Fozzy", "Piggy", "Animal", "Gonzo" }); GSObject apple = new GSObject(); apple.AttachString("name", "Apple"); apple.AttachString("color", "red"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)1.5); GSObject lemon = new GSObject(); apple.AttachString("name", "Lemon"); apple.AttachString("color", "yellow"); apple.AttachBool("inStock", false); apple.AttachFloat("price", (float)0.8); GSObject apricoat = new GSObject(); apple.AttachString("name", "Apricoat"); apple.AttachString("color", "orange"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)1.9); GSObject kiwi = new GSObject(); apple.AttachString("name", "Kiwi"); apple.AttachString("color", "green"); apple.AttachBool("inStock", true); apple.AttachFloat("price", (float)2.3); GSArray fruits = new GSArray(); fruits.AddGSObject(apple); fruits.AddGSObject(lemon); fruits.AddGSObject(apricoat); fruits.AddGSObject(kiwi); obj.AttachGSArray("fruits", fruits); Stopwatch w1 = Stopwatch.StartNew(); for (int i = 0; i < 50000; i++) { byte[] b = obj.ToGSBinary(); } w1.Stop(); Console.WriteLine(BitConverter.IsLittleEndian ? "Little Endian" : "Big Endian"); Console.WriteLine(w1.ElapsedMilliseconds + "ms"); } Here's the code for some of my other classes that are used in the code above. Most of it is repetitive. GSObject GSArray GSWrappedObject

    Read the article

  • Recent Innovations to ILOM

    - by B.Koch
    by Josh Rosen If you are wondering how Oracle can make some of the most advanced, reliable, and fault tolerant servers on the market, look no further than Oracle Integrated Lights Out Manager or ILOM.  We build ILOM into every server we create, from Oracle x86 Systems such as X3-2 to the SPARC T-Series family. Oracle ILOM is an embedded service processor, but it's really more than that.  It's a computer within a computer.  It's smart, it's tightly integrated into all aspects of the server's operation, and it's a big reason why Oracle servers are used for some of the most mission-critical workloads out there. To understand the value of ILOM, there is no better place to start than its fault management capability.  We have taken the sophisticated fault management architecture from Solaris, developed and refined over a decade, and built it into each and every ILOM. ILOM detects a potential issue at its earliest stage, watching low-level sensors.   If the root cause of a problem is not clear from a single error reading, ILOM will look for other clues and combine multiple pieces of information to correctly identify a failing component. ILOM provides peace of mind. We tailor our fault management for each new server platform that we produce.  You can rest assured that it's always actively keeping the server healthy.  And if there is a problem, you can be confident it will let you know by sending you a notification by e-mail or trap. We also heard IT managers tell us they needed a Ph.D. in computer engineering to manage today's servers. It doesn't have to be that way.  Thanks to the latest innovations to Oracle ILOM, we present hardware inventory and status in way that makes sense – to anyone.  Green means everything is healthy and red means something is wrong.  When a component needs to be replaced a clear message indicates where the problem is and points you at a knowledge article about that problem.  It's that simple. Simpler management and simple interfaces mean reduced complexity and lower costs to manage.  And we know that's really important. ILOM does all this while also providing advanced service processor features you depend on for managing enterprise class systems.  You can remotely control the server power, interact with a virtual video console for the server, and mount media on the server remotely.  There is no need to spend money on a KVM switch to get this functionality. And when people hear how advanced ILOM is, they can't believe ILOM is free.  All features are enabled and included with each Oracle server that you buy.  There are no advanced licenses you need to purchase or features to unlock. Configuring ILOM has also never been easier.  It is now possible to configure almost all aspects of the server directly from ILOM.  This includes changing BIOS settings, persistently modifying boot order, and optimizing power settings -- all directly from ILOM. But Oracle's innovation does not stop with ILOM.  Oracle has engineered Oracle Enterprise Manager Ops Center to integrate directly with ILOM, providing centralized management across all of our servers. Ops Center will discover each of your Oracle servers over the network by searching for ILOMs.  When it finds one, it knows how to communicate with ILOM to monitoring and configure that server from application to disk. Since every server that Oracle produces, from x86 Systems to SPARC T-Series up and down the line, comes with Oracle ILOM, you can manage all Oracle servers in the same way.  And while all of our servers may have different components on the inside, each with their specialized functions, the way you integrate them and the way you monitor and manage them is exactly the same. Oracle ILOM is state-of-art.  If you are looking for a server that make systems management simple and is easy to integrate and maintain, check out the latest advances to Oracle ILOM. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

    Read the article

  • Integrating Code Metrics in TFS 2010 Build

    - by Jakob Ehn
    The build process template and custom activity described in this post is available here: http://cid-ee034c9f620cd58d.office.live.com/self.aspx/BlogSamples/CodeMetricsSample.zip Running code metrics has been available since VS 2008, but only from inside the IDE. Yesterday Microsoft finally releases a Visual Studio Code Metrics Power Tool 10.0, a command line tool that lets you run code metrics on your applications.  This means that it is now possible to perform code metrics analysis on the build server as part of your nightly/QA builds (for example). In this post I will show how you can run the metrics command line tool, and also a custom activity that reads the output and appends the results to the build log, and also fails he build if the metric values exceeds certain (configurable) treshold values. The code metrics tool analyzes all the methods in the assemblies, measuring cyclomatic complexity, class coupling, depth of inheritance and lines of code. Then it calculates a Maintainability Index from these values that is a measure f how maintanable this method is, between 0 (worst) and 100 (best). For information on hwo this value is calculated, see http://blogs.msdn.com/b/codeanalysis/archive/2007/11/20/maintainability-index-range-and-meaning.aspx. After this it aggregates the information and present it at the class, namespace and module level as well. Running Metrics.exe in a build definition Running the actual tool is easy, just use a InvokeProcess activity last in the Compile the Project sequence, reference the metrics.exe file and pass the correct arguments and you will end up with a result XML file in the drop directory. Here is how it is done in the attached build process template: In the above sequence I first assign the path to the code metrics result file ([BinariesDirectory]\result.xml) to a variable called MetricsResultFile, which is then sent to the InvokeProcess activity in the Arguments property. Here are the arguments for the InvokeProcess activity: Note that we tell metrics.exe to analyze all assemblies located in the Binaries folder. You might want to do some more intelligent filtering here, you probably don’t want to analyze all 3rd party assemblies for example. Note also the path to the metrics.exe, this is the default location when you install the Code Metrics power tool. You must of course install the power tool on all build servers. Using the standard output logging (in the Handle Standard Output/Handle Error Output sections), we get the following output when running the build: Integrating Code Metrics into the build Having the results available next to the build result is nice, but we want to have results integrated in the build result itself, and also to affect the outcome of the build. The point of having QA builds that measure, for example, code metrics is to make it very clear how the code being built measures up to the standards of the project/company. Just having a XML file available in the drop location will not cause the developers to improve their code, but a (partially) failing build will! To do this, we need to write a custom activity that parses the metrics result file, logs it to the build log and fails the build if the values frfom the metrics is below/above some predefined treshold values. The custom activity performs the following steps Parses the XML. I’m using Linq 2 XSD for this, since the XML schema for the result file is available, it is vey easy to generate code that lets you query the structure using standard Linq operators. Runs through the metric result hierarchy and logs the metrics for each level and also verifies maintainability index and the cyclomatic complexity with the treshold values. The treshold values are defined in the build process template are are sent in as arguments to the custom activity If the treshold values are exceeded, the activity either fails or partially fails the current build. For more information about the structure of the code metrics result file, read Cameron Skinner's post about it. It is very simpe and easy to understand. I won’t go through the code of the custom activity here, since there is nothing special about it and it is available for download so you can look at it and play with it yourself. The treshold values for Maintainability Index and Cyclomatic Complexity is defined in the build process template, and can be modified per build definition: I have taken the default value for these settings from my colleague Terje Sandström post on Code Metrics - suggestions for approriate limits. You’ll notice that this is quite an improvement compared to using code metrics inside the IDE, where Red/Yellow/Green limits are fixed (and the default values are somewaht strange, see Terjes post for a discussion on this) This is the first version of the code metrics integration with TFS 2010 Build, I will proabably enhance the functionality and the logging (the “tree view” structure in the log becomes quite hard to read) soon. I will also consider adding it to the Community TFS Build Extensions site when it becomes a bit more mature. Another obvious improvement is to extend the data warehouse of TFS and push the metric results back to the warehouse and make it visible in the reports.

    Read the article

  • GLSL Atmospheric Scattering Issue

    - by mtf1200
    I am attempting to use Sean O'Neil's shaders to accomplish atmospheric scattering. For now I am just using SkyFromSpace and GroundFromSpace. The atmosphere works fine but the planet itself is just a giant dark sphere with a white blotch that follows the camera. I think the problem might rest in the "v3Attenuation" variable as when this is removed the sphere is show (albeit without scattering). Here is the vertex shader. Thanks for the time! uniform mat4 g_WorldViewProjectionMatrix; uniform mat4 g_WorldMatrix; uniform vec3 m_v3CameraPos; // The camera's current position uniform vec3 m_v3LightPos; // The direction vector to the light source uniform vec3 m_v3InvWavelength; // 1 / pow(wavelength, 4) for the red, green, and blue channels uniform float m_fCameraHeight; // The camera's current height uniform float m_fCameraHeight2; // fCameraHeight^2 uniform float m_fOuterRadius; // The outer (atmosphere) radius uniform float m_fOuterRadius2; // fOuterRadius^2 uniform float m_fInnerRadius; // The inner (planetary) radius uniform float m_fInnerRadius2; // fInnerRadius^2 uniform float m_fKrESun; // Kr * ESun uniform float m_fKmESun; // Km * ESun uniform float m_fKr4PI; // Kr * 4 * PI uniform float m_fKm4PI; // Km * 4 * PI uniform float m_fScale; // 1 / (fOuterRadius - fInnerRadius) uniform float m_fScaleDepth; // The scale depth (i.e. the altitude at which the atmosphere's average density is found) uniform float m_fScaleOverScaleDepth; // fScale / fScaleDepth attribute vec4 inPosition; vec3 v3ELightPos = vec3(g_WorldMatrix * vec4(m_v3LightPos, 1.0)); vec3 v3ECameraPos= vec3(g_WorldMatrix * vec4(m_v3CameraPos, 1.0)); const int nSamples = 2; const float fSamples = 2.0; varying vec4 color; float scale(float fCos) { float x = 1.0 - fCos; return m_fScaleDepth * exp(-0.00287 + x*(0.459 + x*(3.83 + x*(-6.80 + x*5.25)))); } void main(void) { gl_Position = g_WorldViewProjectionMatrix * inPosition; // Get the ray from the camera to the vertex and its length (which is the far point of the ray passing through the atmosphere) vec3 v3Pos = vec3(g_WorldMatrix * inPosition); vec3 v3Ray = v3Pos - v3ECameraPos; float fFar = length(v3Ray); v3Ray /= fFar; // Calculate the closest intersection of the ray with the outer atmosphere (which is the near point of the ray passing through the atmosphere) float B = 2.0 * dot(m_v3CameraPos, v3Ray); float C = m_fCameraHeight2 - m_fOuterRadius2; float fDet = max(0.0, B*B - 4.0 * C); float fNear = 0.5 * (-B - sqrt(fDet)); // Calculate the ray's starting position, then calculate its scattering offset vec3 v3Start = m_v3CameraPos + v3Ray * fNear; fFar -= fNear; float fDepth = exp((m_fInnerRadius - m_fOuterRadius) / m_fScaleDepth); float fCameraAngle = dot(-v3Ray, v3Pos) / fFar; float fLightAngle = dot(v3ELightPos, v3Pos) / fFar; float fCameraScale = scale(fCameraAngle); float fLightScale = scale(fLightAngle); float fCameraOffset = fDepth*fCameraScale; float fTemp = (fLightScale + fCameraScale); // Initialize the scattering loop variables float fSampleLength = fFar / fSamples; float fScaledLength = fSampleLength * m_fScale; vec3 v3SampleRay = v3Ray * fSampleLength; vec3 v3SamplePoint = v3Start + v3SampleRay * 0.5; // Now loop through the sample rays vec3 v3FrontColor = vec3(0.0, 0.0, 0.0); vec3 v3Attenuate; for(int i=0; i<nSamples; i++) { float fHeight = length(v3SamplePoint); float fDepth = exp(m_fScaleOverScaleDepth * (m_fInnerRadius - fHeight)); float fScatter = fDepth*fTemp - fCameraOffset; v3Attenuate = exp(-fScatter * (m_v3InvWavelength * m_fKr4PI + m_fKm4PI)); v3FrontColor += v3Attenuate * (fDepth * fScaledLength); v3SamplePoint += v3SampleRay; } vec3 first = v3FrontColor * (m_v3InvWavelength * m_fKrESun + m_fKmESun); vec3 secondary = v3Attenuate; color = vec4((first + vec3(0.25,0.25,0.25) * secondary), 1.0); // ^^ that color is passed to the frag shader and is used as the gl_FragColor } Here is also an image of the problem image

    Read the article

  • Check Your Spelling, Grammar, and Style in Firefox and Chrome

    - by Matthew Guay
    Are you tired of making simple writing mistakes that get past your browser’s spell-check?  Here’s how you can get advanced grammar check and more in Firefox and Chrome with After the Deadline. Microsoft Word has spoiled us with grammar, syntax, and spell checking, but the default spell check in Firefox and Chrome still only does basic checks.  Even webapps like Google Docs don’t check more than basic spelling errors.  However, WordPress.com is an exception; it offers advanced spelling, grammar, and syntax checking with its After the Deadline proofing system.  This helps you keep from making embarrassing mistakes on your blog posts, and now, thanks to a couple free browser plugins, it can help you keep from making these mistakes in any website or webapp. After the Deadline in Google Chrome Add the After the Deadline extension (link below) to Chrome as usual. As soon as it’s installed, you’re ready to start improving your online writing.  To check spelling, grammar, and more, click the ABC button that you’ll now see at the bottom of most text boxes online. After a quick scan, grammar mistakes are highlighted in green, complex expressions and other syntax problems are highlighted in blue, and spelling mistakes are highlighted in red as would be expected.  Click on an underlined word to choose one of its recommended changes or ignore the suggestion. Or, if you want more explanation about what was wrong with that word or phrase, click Explain for more info. And, if you forget to run an After the Deadline scan before submitting a text entry, it will automatically check to make sure you still want to submit it.  Click Cancel to go back and check your writing first.   To change the After the Deadline settings, click its icon in the toolbar and select View Options.  Additionally, if you want to disable it on the site you’re on, you can click Disable on this site directly from the popup. From the settings page, you can choose extra things to check for such as double negatives and redundant phrases, as well as add sites and words to ignore. After the Deadline in Firefox Add the After the Deadline add-on to Firefox (link below) as normal. After the Deadline basically the same in Firefox as it does in Chrome.  Select the ABC icon in the lower right corner of textboxes to check them for problems, and After the Deadline will underline the problems as it did in Chrome.  To view a suggested change in Firefox, right-click on the underlined word and select the recommended change or ignore the suggestion. And, if you forget to check, you’ll see a friendly reminder asking if you’re sure you want to submit your text like it is. You can access the After the Deadline settings in Firefox from the menu bar.  Click Tools, then select AtD Preferences.  In Firefox, the settings are in a options dialog with three tabs, but it includes the same options as the Chrome settings page.  Here you can make After the Deadline as correction-happy as you like.   Conclusion The web has increasingly become an interactive place, and seldom does a day go by that we aren’t entering text in forms and comments that may stay online forever.  Even our insignificant tweets are being archived in the Library of Congress.  After the Deadline can help you make sure that your permanent internet record is as grammatically correct as possible.  Even though it doesn’t catch every problem, and even misses some spelling mistakes, it’s still a great help. Links Download the After the Deadline extension for Google Chrome Download the After the Deadline add-on for Firefox Similar Articles Productive Geek Tips Quick Tip: Disable Favicons in FirefoxStupid Geek Tricks: Duplicate a Tab with a Shortcut Key in Chrome or FirefoxHow to Disable the New Geolocation Feature in Google ChromeStupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeStop YouTube Videos from Automatically Playing in Chrome TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Easily Search Food Recipes With Recipe Chimp Tech Fanboys Field Guide Check these Awesome Chrome Add-ons iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools

    Read the article

  • [GEEK SCHOOL] Network Security 3: Windows Defender and a Malware-Free System

    - by Ciprian Rusen
    In this second lesson we are going to talk about one of the most confusing security products that are bundled with Windows: Windows Defender. In the past, this product has had a bad reputation and for good reason – it was very limited in its capacity to protect your computer from real-world malware. However, the latest version included in Windows 8.x operating systems is much different than in the past and it provides real protection to its users. The nice thing about Windows Defender in its current incarnation, is that it protects your system from the start, so there are never gaps in coverage. We will start this lesson by explaining what Windows Defender is in Windows 7 and Vista versus what it is in Windows 8, and what product to use if you are using an earlier version. We next will explore how to use Windows Defender, how to improve its default settings, and how to deal with the alerts that it displays. As you will see, Windows Defender will have you using its list of quarantined items a lot more often than other security products. This is why we will explain in detail how to work with it and remove malware for good or restore those items that are only false alarms. Lastly, you will learn how to turn off Windows Defender if you no longer want to use it and you prefer a third-party security product in its place and then how to enable it back, if you have changed your mind about using it. Upon completion, you should have a thorough understanding of your system’s default anti-malware options, or how to protect your system expeditiously. What is Windows Defender? Unfortunately there is no one clear answer to this question because of the confusing way Microsoft has chosen to name its security products. Windows Defender is a different product, depending on the Windows operating system you are using. If you use Windows Vista or Windows 7, then Windows Defender is a security tool that protects your computer from spyware. This but one form of malware made out of tools and applications that monitor your movements on the Internet or the activities you make on your computer. Spyware tends to send the information that is collected to a remote server and it is later used in all kinds of malicious purposes, from displaying advertising you don’t want, to using your personal data, etc. However, there are many other types of malware on the Internet and this version of Windows Defender is not able to protect users from any of them. That’s why, if you are using Windows 7 or earlier, we strongly recommend that you disable Windows Defender and install a more complete security product like Microsoft Security Essentials, or third-party security products from specialized security vendors. If you use Windows 8.x operating systems, then Windows Defender is the same thing as Microsoft Security Essentials: a decent security product that protects your computer in-real time from viruses and spyware. The fact that this product protects your computer also from viruses, not just from spyware, makes a huge difference. If you don’t want to pay for security products, Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) are good alternatives. Windows Defender in Windows 8.x and Microsoft Security Essentials are the same product, only their name is different. In this lesson, we will use the Windows Defender version from Windows 8.x but our instructions apply also to Microsoft Security Essentials (MSE) in Windows 7 and Windows Vista. If you want to download Microsoft Security Essentials and try it out, we recommend you to use this page: Download Microsoft Security Essentials. There you will find both 32-bit and 64-bit editions of this product as well versions in multiple languages. How to Use and Configure Windows Defender Using Windows Defender (MSE) is very easy to use. To start, search for “defender” on the Windows 8.x Start screen and click or tap the “Windows Defender” search result. In Windows 7, search for “security” in the Start Menu search box and click “Microsoft Security Essentials”. Windows Defender has four tabs which give you access to the following tools and options: Home – here you can view the security status of your system. If everything is alright, then it will be colored in green. If there are some warnings to consider, then it will be colored in yellow, and if there are threats that must be dealt with, everything will be colored in red. On the right side of the “Home” tab you will find options for scanning your computer for viruses and spyware. On the bottom of the tab you will find information about when the last scan was performed and what type of scan it was. Update – here you will find information on whether this product is up-to-date. You will learn when it was last updated and the versions of the definitions it is using. You can also trigger a manual update. History – here you can access quarantined items, see which items you’ve allowed to run on your PC even if they were identified as malware by Windows Defender, and view a complete list with all the malicious items Windows Defender has detected on your PC. In order to access all these lists and work with them, you need to be signed in as an administrator. Settings – this is the tab where you can turn on the real-time protection service, exclude files, file types, processes, and locations from its scans as well as access a couple of more advanced settings. The only difference between Windows Defender in Windows 8.x and Microsoft Security Essentials (in Windows 7 or earlier) is that, in the “Settings” tab, Microsoft Security Essentials allows you to set when to run scheduled scans while Windows Defender lacks this option.

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >