Search Results

Search found 2525 results on 101 pages for 'jared green'.

Page 94/101 | < Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >

  • My Code Kata–A Solution Kata

    - by Glav
    There are many developers and coders out there who like to do code Kata’s to keep their coding ability up to scratch and to practice their skills. I think it is a good idea. While I like the concept, I find them dead boring and of minimal purpose. Yes, they serve to hone your skills but that’s about it. They are often quite abstract, in that they usually focus on a small problem set requiring specific solutions. It is fair enough as that is how they are designed but again, I find them quite boring. What I personally like to do is go for something a little larger and a little more fun. It takes a little more time and is not as easily executed as a kata though, but it services the same purposes from a practice perspective and allows me to continue to solve some problems that are not directly part of the initial goal. This means I can cover a broader learning range and have a bit more fun. If I am lucky, sometimes they even end up being useful tools. With that in mind, I thought I’d share my current ‘kata’. It is not really a code kata as it is too big. I prefer to think of it as a ‘solution kata’. The code is on bitbucket here. What I wanted to do was create a kind of simplistic virtual world where I can create a player, or a class, stuff it into the world, and see if it survives, and can navigate its way to the exit. Requirements were pretty simple: Must be able to define a map to describe the world using simple X,Y co-ordinates. Z co-ordinates as well if you feel like getting clever. Should have the concept of entrances, exists, solid blocks, and potentially other materials (again if you want to get clever). A coder should be able to easily write a class which will act as an inhabitant of the world. An inhabitant will receive stimulus from the world in the form of surrounding environment and be able to make a decision on action which it passes back to the ‘world’ for processing. At a minimum, an inhabitant will have sight and speed characteristics which determine how far they can ‘see’ in the world, and how fast they can move. Coders who write a really bad ‘inhabitant’ should not adversely affect the rest of world. Should allow multiple inhabitants in the world. So that was the solution I set out to act as a practice solution and a little bit of fun. It had some interesting problems to solve and I figured, if it turned out ok, I could potentially use this as a ‘developer test’ for interviews. Ask a potential coder to write a class for an inhabitant. Show the coder the map they will navigate, but also mention that we will use their code to navigate a map they have not yet seen and a little more complex. I have been playing with solution for a short time now and have it working in basic concepts. Below is a screen shot using a very basic console visualiser that shows the map, boundaries, blocks, entrance, exit and players/inhabitants. The yellow asterisks ‘*’ are the players, green ‘O’ the entrance, purple ‘^’ the exit, maroon/browny ‘#’ are solid blocks. The players can move around at different speeds, knock into each others, and make directional movement decisions based on what they see and who is around them. It has been quite fun to write and it is also quite fun to develop different players to inject into the world. The code below shows a really simple implementation of an inhabitant that can work out what to do based on stimulus from the world. It is pretty simple and just tries to move in some direction if there is nothing blocking the path. public class TestPlayer:LivingEntity { public TestPlayer() { Name = "Beta Boy"; LifeKey = Guid.NewGuid(); } public override ActionResult DecideActionToPerform(EcoDev.Core.Common.Actions.ActionContext actionContext) { try { var action = new MovementAction(); // move forward if we can if (actionContext.Position.ForwardFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.ForwardFacingPositions[0])) { action.DirectionToMove = MovementDirection.Forward; return action; } } if (actionContext.Position.LeftFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.LeftFacingPositions[0])) { action.DirectionToMove = MovementDirection.Left; return action; } } if (actionContext.Position.RearFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RearFacingPositions[0])) { action.DirectionToMove = MovementDirection.Back; return action; } } if (actionContext.Position.RightFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RightFacingPositions[0])) { action.DirectionToMove = MovementDirection.Right; return action; } } return action; } catch (Exception ex) { World.WriteDebugInformation("Player: "+ Name, string.Format("Player Generated exception: {0}",ex.Message)); throw ex; } } private bool CheckAccessibilityOfMapBlock(MapBlock block) { if (block == null || block.Accessibility == MapBlockAccessibility.AllowEntry || block.Accessibility == MapBlockAccessibility.AllowExit || block.Accessibility == MapBlockAccessibility.AllowPotentialEntry) { return true; } return false; } } It is simple and it seems to work well. The world implementation itself decides the stimulus context that is passed to he inhabitant to make an action decision. All movement is carried out on separate threads and timed appropriately to be as fair as possible and to cater for additional skills such as speed, and eventually maybe stamina, strength, with actions like fighting. It is pretty fun to make up random maps and see how your inhabitant does. You can download the code from here. Along the way I have played with parallel extensions to make the compute intensive stuff spread across all cores, had to heavily factor in visibility of methods and properties so design of classes was paramount, work out movement algorithms that play fairly in the world and properly favour the players with higher abilities, as well as a host of other issues. So that is my ‘solution kata’. If I keep going with it, I may develop a web interface for it where people can upload assemblies and watch their player within a web browser visualiser and maybe even a map designer. What do you do to keep the fires burning?

    Read the article

  • Underwriting in a New Frontier: Spurring Innovation

    - by [email protected]
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Calibri","sans-serif";} Susan Keuer, product strategy manager for Oracle Insurance, shares her experiences and insight from the 2010 Association of Home Office Underwriters (AHOU) Annual Conference, April 11-14, in San Antonio, Texas    How can I be more innovative in underwriting?  It's a common question I hear from insurance carriers, producers and others, so it was no surprise that it was the key theme at the recent 2010 AHOU Annual Conference.  This year's event drew more than 900 insurance professionals involved in the underwriting process across life and annuities, property and casualty and reinsurance from around the globe, including the U.S., Canada, Australia, Bahamas, and more, to San Antonio - a Texas city where innovation transformed a series of downtown drainage canals into its premiere River Walk tourist destination.   CNN's Medical Correspondent Dr. Sanjay Gupta kicked off the conference with a phenomenal opening session that drove home the theme of the conference, "Underwriting in a New Frontier:  Spurring Innovation."   Drawing from his own experience as a neurosurgeon treating critically injured medical patients in the field in Iraq, Gupta inspired audience members to think outside the box during the underwriting process. He shared a compelling story of operating on a soldier who had suffered a head-related trauma in a field hospital.  With minimal supplies available Gupta used a Black and Decker saw to operate on the soldier's head and reduce pressure on his swelling brain. Drawing from this example, Gupta encouraged underwriters to think creatively, be innovative, and consider new tools and sources of information, such as social networking sites, during the underwriting process. So as you are looking at risk take into consideration all resources you have available.    Gupta also stressed the concept of IKIGAI - noting that individuals who believe that their life is worth living are less likely to die than are their counterparts without this belief.  How does one quantify this approach to life or thought process when evaluating risk?  Could this be something to consider as a "category" in the near future? How can this same belief in your own work spur innovation?   The role of technology was a hot topic of discussion throughout the conference.  Sessions delved into the latest in underwriting software to the rise of social media and how it is being increasingly integrated into underwriting process and solutions.  In one session a trio of panelists representing the carrier, producer and vendor communities stressed the importance to underwriters of leveraging new technology and the plethora of online information sources, which all could be used to accurately, honestly and consistently evaluate the risk throughout the underwriting process.   Another focused on the explosion of social media noting:  1.    Social media is growing exponentially - About eight percent of Americans used social media five years ago. Today about 46 percent of Americans do so, with 85 percent of financial services professionals using social media in their work.  2.    It will impact your business - Underwriters reconfirmed over and over that they are increasingly using "free" tools that are available in cyberspace in lieu of more costly solutions, such as inspection reports conducted by individuals in the field.  3.    Information is instantly available on the Web, anytime, anywhere - LinkedIn was mentioned as a way to connect to peers in the underwriting community and producers alike.  Many carriers and agents also are using Facebook to promote their company to customers - and as a point-of-entry to allow them to perform some functionality - such as accessing product marketing information versus directing users to go to the carrier's own proprietary website.  Other carriers have released their tight brand marketing to allow their producers to drive more business to their personal Facebook site where they offer innovative tools such as Application Capture or asking medical information in a more relaxed fashion.     Other key topics at the conference included the economy, ongoing industry consolidation, real-estate valuations as an asset and input into the underwriting process, and producer trends.  All stressed a "back to basics" approach for low cost, term products.   Finally, Connie Merritt, RN, PHN, entertained the large group of atttendees with audience-engaging insight on how to "Tame the Lions in Your Life - Dealing with Complainers, Bullies, Grump and Curmudgeon." Merritt noted "we are too busy for our own good." She shared how her overachieving personality had impacted her life.  Audience members then were asked to pick red, yellow, blue, or green shapes, without knowing that each one represented a specific personality trait.  For example, those who picked blue were the peacemakers. Those who choose yellow were social - the hint was to "Be Quiet Longer."  She then offered these "lion taming" steps:   1.    Admit It 2.    Accept It 3.    Let Go 4.    Be Present (which paralleled Gupta's IKIGAI concept)   When thinking about underwriting I encourage you to be present in the moment and think creatively, but don't be afraid to look ahead to the future and be an innovator.  I hope to see you at next year's AHOU Annual Conference, May 1-4, 2011 at The Mirage in Las Vegas, Nev.     Susan Keuer is the product strategy manager for new business underwriting.  She brings more than 20 years of insurance industry experience working with leading insurance carriers and technology companies to her role on the product strategy team for life/annuities solutions within the Oracle Insurance Global Business Unit  

    Read the article

  • Silverlight MEF – Download On Demand

    - by PeterTweed
    Take the Slalom Challenge at www.slalomchallenge.com! A common challenge with building complex applications in Silverlight is the initial download size of the xap file.  MEF enables us to build composable applications that allows us to build complex composite applications.  Wouldn’t it be great if we had a mechanism to spilt out components into different Silverlight applications in separate xap files and download the separate xap file only if needed?   MEF gives us the ability to do this.  This post will cover the basics needed to build such a composite application split between different silerlight applications and download the referenced silverlight application only when needed. Steps: 1.     Create a Silverlight 4 application 2.     Add references to the following assemblies: System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll 3.     Add a new Silverlight 4 application called ExternalSilverlightApplication to the solution that was created in step 1.  Ensure the new application is hosted in the web application for the solution and choose to not create a test page for the new application. 4.     Delete the App.xaml and MainPage.xaml files – they aren’t needed. 5.     Add references to the following assemblies in the ExternalSilverlightApplication project: System.ComponentModel.Composition.dll System.ComponentModel.Composition.Initialization.dll 6.     Ensure the two references above have their Copy Local values set to false.  As we will have these two assmblies in the original Silverlight application, we will have no need to include them in the built ExternalSilverlightApplication build. 7.     Add a new user control called LeftControl to the ExternalSilverlightApplication project. 8.     Replace the LayoutRoot Grid with the following xaml:     <Grid x:Name="LayoutRoot" Background="Beige" Margin="40" >         <Button Content="Left Content" Margin="30"></Button>     </Grid> 9.     Add the following statement to the top of the LeftControl.xaml.cs file using System.ComponentModel.Composition; 10.   Add the following attribute to the LeftControl class     [Export(typeof(LeftControl))]   This attribute tells MEF that the type LeftControl will be exported – i.e. made available for other applications to import and compose into the application. 11.   Add a new user control called RightControl to the ExternalSilverlightApplication project. 12.   Replace the LayoutRoot Grid with the following xaml:     <Grid x:Name="LayoutRoot" Background="Green" Margin="40"  >         <TextBlock Margin="40" Foreground="White" Text="Right Control" FontSize="16" VerticalAlignment="Center" HorizontalAlignment="Center" ></TextBlock>     </Grid> 13.   Add the following statement to the top of the RightControl.xaml.cs file using System.ComponentModel.Composition; 14.   Add the following attribute to the RightControl class     [Export(typeof(RightControl))] 15.   In your original Silverlight project add a reference to the ExternalSilverlightApplication project. 16.   Change the reference to the ExternalSilverlightApplication project to have it’s Copy Local value = false.  This will ensure that the referenced ExternalSilverlightApplication Silverlight application is not included in the original Silverlight application package when it it built.  The ExternalSilverlightApplication Silverlight application therefore has to be downloaded on demand by the original Silverlight application for it’s controls to be used. 1.     In your original Silverlight project add the following xaml to the LayoutRoot Grid in MainPage.xaml:         <Grid.RowDefinitions>             <RowDefinition Height="65*" />             <RowDefinition Height="235*" />         </Grid.RowDefinitions>         <Button Name="LoaderButton" Content="Download External Controls" Click="Button_Click"></Button>         <StackPanel Grid.Row="1" Orientation="Horizontal" HorizontalAlignment="Center" >             <Border Name="LeftContent" Background="Red" BorderBrush="Gray" CornerRadius="20"></Border>             <Border Name="RightContent" Background="Red" BorderBrush="Gray" CornerRadius="20"></Border>         </StackPanel>       The borders will hold the controls that will be downlaoded, imported and composed via MEF when the button is clicked. 2.     Add the following statement to the top of the MainPage.xaml.cs file using System.ComponentModel.Composition; 3.     Add the following properties to the MainPage class:         [Import(typeof(LeftControl))]         public LeftControl LeftUserControl { get; set; }         [Import(typeof(RightControl))]         public RightControl RightUserControl { get; set; }   This defines properties accepting LeftControl and RightControl types.  The attrributes are used to tell MEF the discovered type that should be applied to the property when composition occurs. 17.   Add the following event handler for the button click to the MainPage.xaml.cs file:         private void Button_Click(object sender, RoutedEventArgs e)         {                   DeploymentCatalog deploymentCatalog =     new DeploymentCatalog("ExternalSilverlightApplication.xap");                   CompositionHost.Initialize(deploymentCatalog);                   deploymentCatalog.DownloadCompleted += (s, i) =>                 {                     if (i.Error == null)                     {                         CompositionInitializer.SatisfyImports(this);                           LeftContent.Child = LeftUserControl;                         RightContent.Child = RightUserControl;                         LoaderButton.IsEnabled = false;                     }                 };                   deploymentCatalog.DownloadAsync();         } This is where the magic happens!  The deploymentCatalog object is pointed to the ExternalSilverlightApplication.xap file.  It is then associated with the CompositionHost initialization.  As the download will be asynchronous, an eventhandler is created for the DownloadCompleted event.  The deploymentCatalog object is then told to start the asynchronous download. The event handler that executes when the download is completed uses the CompositionInitializer.SatisfyImports() function to tell MEF to satisfy the Imports for the current class.  It is at this point that the LeftUserControl and RightUserControl properties are initialized with composed objects from the downloaded ExternalSilverlightApplication.xap package. 18.   Run the application click the Download External Controls button and see the controls defined in the ExternalSilverlightApplication application loaded into the original Silverlight application. Congratulations!  You have implemented download on demand capabilities for composite applications using the MEF DeploymentCatalog class.  You are now able to segment your applications into separate xap file for deployment.

    Read the article

  • Converting projects to use Automatic NuGet restore

    - by terje
    Originally posted on: http://geekswithblogs.net/terje/archive/2014/06/11/converting-projects-to-use-automatic-nuget-restore.aspxDownload tool In version 2.7 of NuGet automatic nuget restore was introduced, meaning you no longer need to distort your msbuild project files with nuget target information.   Visual Studio and TFS 2013 build have this enabled by default.  However, if your project was created before this was introduced, and/or if you have used the “Enable NuGet Package Restore” afterwards, you now have a series of unwanted things in your projects, and a series of project files that have been modified – and – you no longer neither want nor need this !  You might also get into some unwanted issues due to these modifications.  This is a MSBuild modification that was needed only before NuGet 2.7 ! So: DON’T USE THIS FUNCTION !!! There is an issue https://nuget.codeplex.com/workitem/4019 on this on the NuGet project site to get this function removed, renamed or at least moved farther away from the top level (please help vote it up!).  The response seems to be that it WILL BE removed, around version 3.0. This function does nothing you need after the introduction of NuGet 2.7.  What is also unfortunate is the naming of it – it implies that it is needed, it is not, and what is worse, there is no corresponding function to remove what it does ! So to fix this use the tool named IFix, that will fix this issue for you   - all free of course, and the code is open source.  Also report issues there:  https://github.com/OsirisTerje/IFix    IFix information DOWNLOAD HERE This command line tool installs using an MSI, and add itself to the system path.  If you work in a team, you will probably need to use the  tool multiple times.  Anyone in the team may at any time use the “Enable NuGet Package Restore” function and mess up your project again.  The IFix program can be run either in a  check modus, where it does not write anything back – it only checks if you have any issues, or in a Fix mode, where it will also perform the necessary fixes for you. The IFix program is used like this: IFix <command> [-c/--check] [-f/--fix]  [-v/--verbose] The command in this case is “nugetrestore”.  It will do a check from the location where it is being called, and run through all subfolders from that location. So  “IFix nugetrestore  --check” , will do the check ,  and “IFix nugetrestore  --fix”  will perform the changes, for all files and folders below the current working directory. (Note that --check  can be replaced with only –c, and --fix with –f, and so on. ) BEWARE: When you run the fix option, all solutions to be affected must be closed in Visual Studio ! So, if you just want to DO it, then: IFix nugetrestore --check to see if you have issues then IFix nugetrestore  --fix to fix them. How does it work IFix nugetrestore  checks and optionally fixes four issues that the older enabling of nuget restore did.  The issues are related to the MSBuild projess, and are: Deleting the nuget.targets file. Deleting the nuget.exe that is located under the .nuget folder Removing all references to nuget.targets in the solution file Removing all properties and target imports of nuget.targets inside the csproj files. IFix fixes these issues in the same sequence. The first step, removing the nuget.targets file is the most critical one, and all instances of the nuget.targets file within the scope of a solution has to be removed, and in addition it has to be done with the solution closed in Visual Studio.  If Visual Studio finds a nuget.targets file, the csproj files will be automatically messed up again. This means the removal process above might need to be done multiple times, specially when you’re working with a team, and that solution context menu still has the “Enable NuGet Package Restore” function.  Someone on the team might inadvertently do this at any time. It can be a good idea to add this check to a checkin policy – if you run TFS standard version control, but that will have no effect if you use TFS Git version control of course. So, better be prepared to run the IFix check from time to time. Or, even better, install IFix on your build servers, and add a call to IFix nugetrestore --check in the TFS Build script.    How does it look As a first example I have run the IFix program from the top of a set of git repositories, so it spans multiple repositories with multiple solutions. The result from the check option is as follows: We see the four red lines, there is one for each of the four checks we talked about in the previous section. The fact that they are red, means we have that particular issue. The first section (above the first red text line) is the nuget targets section.  Notice  No.1, it says it has found no paths to copy.  What IFix does here is to check if there are any defined paths to other nuget galleries.  If there are, then those are copied over to the nuget.config file, where is where it should be in version 2.7 and above.   No.2 says it has found the particular nuget.targets file,  No.3  states it HAS found some other nuget galleries defines in the targets file, which then it would like to copy to the config.file. No.4 is the section for nuget.exe files, and list those it has found, and which it would like to delete. No 5 states it has found a reference to nuget.targets in the solution file.  This reference comes from the fact that the .nuget folder is a solution folder, and the items within are described in the solution file. It then checks the csproj files, and as can be seen from the last red line, it ha found issues in 96 out of 198 csproj files.  There are two possible issues in a csproj files.  No.6 is the first one, and the most common and most important one, an “Import project” section.  This is the section that calls the nuget.targets files.  No.7 is another issue, which seems to sometimes be there, sometimes not, it is a RestorePackages property, which also should go away. Now, if we run the IFix nugetrestore –fix command, and then the check again after that, the result is: All green !

    Read the article

  • Beginner’s Guide to Flock, the Social Media Browser

    - by Asian Angel
    Are you wanting a browser that can work as a social hub from the first moment that you start it up? If you love the idea of a browser that is ready to go out of the box then join us as we look at Flock. During the Install Process When you are installing Flock there are two install windows that you should watch for. The first one lets you choose between the “Express Setup & Custom Setup”. We recommend the “Custom Setup”. Once you have selected the “Custom Setup” you can choose which of the following options will enabled. Notice the “anonymous usage statistics” option at the bottom…you can choose to leave this enabled or disable it based on your comfort level. The First Look When you start Flock up for the first time it will open with three tabs. All three are of interest…especially if this is your first time using Flock. With the first tab you can jump right into “logging in/activating” favorite social services within Flock. This page is set to display each time that you open Flock unless you deselect the option in the lower left corner. The second tab provides a very nice overview of Flock and its’ built-in social management power. The third and final page can be considered a “Personal Page”. You can make some changes to the content displayed for quick and easy access and/or monitoring “Twitter Search, Favorite Feeds, Favorite Media, Friend Activity, & Favorite Sites”. Use the “Widget Menu” in the upper left corner to select the “Personal Page Components” that you would like to use. In the upper right corner there is a built-in “Search Bar” and buttons for “Posting to Your Blog & Uploading Media”. To help personalize the “My World Page” just a bit more you can even change the text to your name or whatever best suits your needs. The Flock Toolbar The “Flock Toolbar” is full of social account management goodness. In order from left to right the buttons are: My World (Homepage), Open People Sidebar, Open Media Bar, Open Feeds Sidebar, Webmail, Open Favorites Sidebar, Open Accounts and Services Sidebar, Open Web Clipboard Sidebar, Open Blog Editor, & Open Photo Uploader. The buttons will be “highlighted” with a blue background to help indicate which area you are in. The first area will display a listing of people that you are watching/following at the services shown here. Clicking on the “Media Bar Button” will display the following “Media Slider Bar” above your “Tab Bar”. Notice that there is a built-in “Search Bar” on the right side. Any photos, etc. clicked on will be opened in the currently focused tab below the “Media Bar”. Here is a listing of the “Media Streams” available for viewing. By default Flock will come with a small selection of pre-subscribed RSS Feeds. You can easily unsubscribe, rearrange, add custom folders, or non-categorized feeds as desired. RSS Feeds subscribed to here can be viewed combined together as a single feed (clickable links) in the “My World Page”. or can be viewed individually in a new tab. Very nice! Next on the “Flock Toolbar is the “Webmail Button”. You can set up access to your favorite “Yahoo!, Gmail, & AOL Mail” accounts from here. The “Favorites Sidebar” combines your “Browser History & Bookmarks” into one convenient location. The “Accounts and Services Sidebar” gives you quick and easy access to get logged into your favorite social accounts. Clicking on any of the links will open that particular service’s login page in a new tab. Want to store items such as photos, links, and text to add into a blog post or tweet later on? Just drag and drop them into the “Web Clipboard Sidebar” for later access. Clicking on the “Blog Editor Button” will open up a separate blogging window to compose your posts in. If you have not logged into or set up an account yet in Flock you will see the following message window. The “Blogging Window”…nice, simple, and straightforward. If you are not already logged into your photo account(s) then you will see the following message window when you click on the “Photo Uploader Button”. Clicking “OK” will open the “Accounts and Services Sidebar” with compatible photo services highlighted in a light yellow color. Log in to your favorite service to start uploading all those great images. After Setting Up Here is what our browser looked like after setting up some of our favorite services. The Twitter feed is certainly looking nice and easy to read through… Some tweaking in the “RSS Feeds Sidebar” makes for a perfect reading experience. Keeping up with our e-mail is certainly easy to do too. A look back at the “Accounts and Services Sidebar” shows that all of our accounts are actively logged in (green dot on the right side). Going back to our “My World Page” you can see how nice everything looks for monitoring our “Friend Activity & Favorite Feeds”. Moving on to regular browsing everything is looking very good… Flock is a perfect choice for anyone wanting a browser and social hub all built into a single app. Conclusion Anyone who loves keeping up with their favorite social services while browsing will find using Flock to be a wonderful experience. You literally get the best of both worlds with this browser. Links Download Flock The Official Flock Extensions Homepage The Official Flock Toolbar Homepage Similar Articles Productive Geek Tips Add Color Coding to Windows 7 Media Center Program GuideAdd Social Bookmarking (Digg This!) Links to your Wordpress BlogHow to use an ISO image on Ubuntu LinuxAdvertise on How-To GeekFixing When Windows Media Player Library Won’t Let You Add Files TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7 Microsoft’s “How Do I ?” Videos Home Networks – How do they look like & the problems they cause

    Read the article

  • The SSIS tuning tip that everyone misses

    - by Rob Farley
    I know that everyone misses this, because I’m yet to find someone who doesn’t have a bit of an epiphany when I describe this. When tuning Data Flows in SQL Server Integration Services, people see the Data Flow as moving from the Source to the Destination, passing through a number of transformations. What people don’t consider is the Source, getting the data out of a database. Remember, the source of data for your Data Flow is not your Source Component. It’s wherever the data is, within your database, probably on a disk somewhere. You need to tune your query to optimise it for SSIS, and this is what most people fail to do. I’m not suggesting that people don’t tune their queries – there’s plenty of information out there about making sure that your queries run as fast as possible. But for SSIS, it’s not about how fast your query runs. Let me say that again, but in bolder text: The speed of an SSIS Source is not about how fast your query runs. If your query is used in a Source component for SSIS, the thing that matters is how fast it starts returning data. In particular, those first 10,000 rows to populate that first buffer, ready to pass down the rest of the transformations on its way to the Destination. Let’s look at a very simple query as an example, using the AdventureWorks database: We’re picking the different Weight values out of the Product table, and it’s doing this by scanning the table and doing a Sort. It’s a Distinct Sort, which means that the duplicates are discarded. It'll be no surprise to see that the data produced is sorted. Obvious, I know, but I'm making a comparison to what I'll do later. Before I explain the problem here, let me jump back into the SSIS world... If you’ve investigated how to tune an SSIS flow, then you’ll know that some SSIS Data Flow Transformations are known to be Blocking, some are Partially Blocking, and some are simply Row transformations. Take the SSIS Sort transformation, for example. I’m using a larger data set for this, because my small list of Weights won’t demonstrate it well enough. Seven buffers of data came out of the source, but none of them could be pushed past the Sort operator, just in case the last buffer contained the data that would be sorted into the first buffer. This is a blocking operation. Back in the land of T-SQL, we consider our Distinct Sort operator. It’s also blocking. It won’t let data through until it’s seen all of it. If you weren’t okay with blocking operations in SSIS, why would you be happy with them in an execution plan? The source of your data is not your OLE DB Source. Remember this. The source of your data is the NCIX/CIX/Heap from which it’s being pulled. Picture it like this... the data flowing from the Clustered Index, through the Distinct Sort operator, into the SELECT operator, where a series of SSIS Buffers are populated, flowing (as they get full) down through the SSIS transformations. Alright, I know that I’m taking some liberties here, because the two queries aren’t the same, but consider the visual. The data is flowing from your disk and through your execution plan before it reaches SSIS, so you could easily find that a blocking operation in your plan is just as painful as a blocking operation in your SSIS Data Flow. Luckily, T-SQL gives us a brilliant query hint to help avoid this. OPTION (FAST 10000) This hint means that it will choose a query which will optimise for the first 10,000 rows – the default SSIS buffer size. And the effect can be quite significant. First let’s consider a simple example, then we’ll look at a larger one. Consider our weights. We don’t have 10,000, so I’m going to use OPTION (FAST 1) instead. You’ll notice that the query is more expensive, using a Flow Distinct operator instead of the Distinct Sort. This operator is consuming 84% of the query, instead of the 59% we saw from the Distinct Sort. But the first row could be returned quicker – a Flow Distinct operator is non-blocking. The data here isn’t sorted, of course. It’s in the same order that it came out of the index, just with duplicates removed. As soon as a Flow Distinct sees a value that it hasn’t come across before, it pushes it out to the operator on its left. It still has to maintain the list of what it’s seen so far, but by handling it one row at a time, it can push rows through quicker. Overall, it’s a lot more work than the Distinct Sort, but if the priority is the first few rows, then perhaps that’s exactly what we want. The Query Optimizer seems to do this by optimising the query as if there were only one row coming through: This 1 row estimation is caused by the Query Optimizer imagining the SELECT operation saying “Give me one row” first, and this message being passed all the way along. The request might not make it all the way back to the source, but in my simple example, it does. I hope this simple example has helped you understand the significance of the blocking operator. Now I’m going to show you an example on a much larger data set. This data was fetching about 780,000 rows, and these are the Estimated Plans. The data needed to be Sorted, to support further SSIS operations that needed that. First, without the hint. ...and now with OPTION (FAST 10000): A very different plan, I’m sure you’ll agree. In case you’re curious, those arrows in the top one are 780,000 rows in size. In the second, they’re estimated to be 10,000, although the Actual figures end up being 780,000. The top one definitely runs faster. It finished several times faster than the second one. With the amount of data being considered, these numbers were in minutes. Look at the second one – it’s doing Nested Loops, across 780,000 rows! That’s not generally recommended at all. That’s “Go and make yourself a coffee” time. In this case, it was about six or seven minutes. The faster one finished in about a minute. But in SSIS-land, things are different. The particular data flow that was consuming this data was significant. It was being pumped into a Script Component to process each row based on previous rows, creating about a dozen different flows. The data flow would take roughly ten minutes to run – ten minutes from when the data first appeared. The query that completes faster – chosen by the Query Optimizer with no hints, based on accurate statistics (rather than pretending the numbers are smaller) – would take a minute to start getting the data into SSIS, at which point the ten-minute flow would start, taking eleven minutes to complete. The query that took longer – chosen by the Query Optimizer pretending it only wanted the first 10,000 rows – would take only ten seconds to fill the first buffer. Despite the fact that it might have taken the database another six or seven minutes to get the data out, SSIS didn’t care. Every time it wanted the next buffer of data, it was already available, and the whole process finished in about ten minutes and ten seconds. When debugging SSIS, you run the package, and sit there waiting to see the Debug information start appearing. You look for the numbers on the data flow, and seeing operators going Yellow and Green. Without the hint, I’d sit there for a minute. With the hint, just ten seconds. You can imagine which one I preferred. By adding this hint, it felt like a magic wand had been waved across the query, to make it run several times faster. It wasn’t the case at all – but it felt like it to SSIS.

    Read the article

  • Evaluating Solutions to Manage Product Compliance? Don't Wait Much Longer

    - by Kerrie Foy
    Depending on severity, product compliance issues can cause all sorts of problems from run-away budgets to business closures. But effective policies and safeguards can create a strong foundation for innovation, productivity, market penetration and competitive advantage. If you’ve been putting off a systematic approach to product compliance, it is time to reconsider that decision, or indecision. Why now?  No matter what industry, companies face a litany of worldwide and regional regulations that require proof of product compliance and environmental friendliness for market access.  For example, Restriction of Hazardous Substances (RoHS) is a regulation that restricts the use of six dangerous materials used in the manufacture of electronic and electrical equipment.  ROHS was originally adopted by the European Union in 2003 for implementation in 2006, and it has evolved over time through various regional versions for North America, China, Japan, Korea, Norway and Turkey.  In addition, the RoHS directive allowed for material exemptions used in Medical Devices, but that exemption ends in 2014.   Additional regulations worth watching are the Battery Directive, Waste Electrical and Electronic Equipment (WEEE), and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) directives.  Additional evolving regulations are coming from governing bodies like the Food and Drug Administration (FDA) and the International Organization for Standardization (ISO). Corporate sustainability initiatives are also gaining urgency and influencing product design. In a survey of 405 corporations in the Global 500 by Carbon Disclosure Project, co-written by PwC (CDP Global 500 Climate Change Report 2012 entitled Business Resilience in an Uncertain, Resource-Constrained World), 48% of the respondents indicated they saw potential to create new products and business services as a response to climate change. Just 21% reported a dedicated budget for the research. However, the report goes on to explain that those few companies are winning over new customers and driving additional profits by exploiting their abilities to adapt to environmental needs. The article cites Dell as an example – Dell has invested in research to develop new products designed to reduce its customers’ emissions by more than 10 million metric tons of CO2e per year. This reduction in emissions should save Dell’s customers over $1billion per year as a result! Over time we expect to see many additional companies prove that eco-design provides marketplace benefits through differentiation and direct customer value. How do you meet compliance requirements and also successfully invest in eco-friendly designs? No doubt companies struggle to answer this question. After all, the journey to get there may involve transforming business models, go-to-market strategies, supply networks, quality assurance policies and compliance processes per the rapidly evolving global and regional directives. There may be limited executive focus on the initiative, inability to quantify noncompliance, or not enough resources to justify investment. To make things even more difficult to address, compliance responsibility can be a passionate topic within an organization, making the prospect of change on an enterprise scale problematic and time-consuming. Without a single source of truth for product data and without proper processes in place, ensuring product compliance burgeons into a crushing task that is cost-prohibitive and overwhelming to an organization. With all the overhead, certain markets or demographics become simply inaccessible. Therefore, the risk to consumer goodwill and satisfaction, revenue, business continuity, and market potential is too great not to solve the compliance challenge. Companies are beginning to adapt and even thrive in today’s highly regulated and transparent environment by implementing systematic approaches to product compliance that are more than functional bandages but revenue-generating engines. Consider partnering with Oracle to help you address your compliance needs. Many of the world’s most innovative leaders and pioneers are leveraging Oracle’s Agile Product Lifecycle Management (PLM) portfolio of enterprise applications to manage the product value chain, centralize product data, automate processes, and launch more eco-friendly products to market faster.   Particularly, the Agile Product Governance & Compliance (PG&C) solution provides out-of-the-box functionality to integrate actionable regulatory information into the enterprise product record from the ideation to the disposal/recycling phase. Agile PG&C makes it possible to efficiently manage compliance per corporate green initiatives as well as regional and global directives. Options are critical, but so is ease-of-use. Anyone who’s grappled with compliance policy knows legal interpretation plays a major role in determining how an organization responds to regulation. Agile PG&C gives you the freedom to configure product compliance per your needs, while maintaining rigorous control over the product record in an easy-to-use interface that facilitates adoption efforts. It allows you to assign regulations as specifications for a part or BOM roll-up. Each specification has a threshold value that alerts you to a non-compliance issue if the threshold value is exceeded. Set however many regulations as specifications you need to make sure a product can be sold in your target countries. Another option is to implement like one of our leading consumer electronics customers and define your own “catch-all” specification to ensure compliance in all markets. You can give your suppliers secure access to enter their component data or integrate a third party’s data. With Agile PG&C you are able to design compliance earlier into your products to reduce cost and improve quality downstream when stakes are higher. Agile PG&C is a comprehensive solution that makes product compliance more reliable and efficient. Throughout product lifecycles, use the solution to support full material disclosures, efficiently manage declarations with your suppliers, feed compliance data into a corrective action if a product must be changed, and swiftly satisfy audits by showing all due diligence tracked in one solution. Given the compounding regulation and consumer focus on urgent environmental issues, now is the time to act. Implementing an enterprise, systematic approach to product compliance is a competitive investment. From the start, Agile Product Governance & Compliance enables companies to confidently design for compliance and sustainability, reduce the cost of compliance, minimize the risk of business interruption, deliver responsible products, and inspire new innovation.  Don’t wait any longer! To find out more about Agile Product Governance & Compliance download the data sheet, contact your sales representative, or call Oracle at 1-800-633-0738. Many thanks to Shane Goodwin, Senior Manager, Oracle Agile PLM Product Management, for contributions to this article. 

    Read the article

  • How-to delete a tree node using the context menu

    - by frank.nimphius
    Hierarchical trees in Oracle ADF make use of View Accessors, which means that only the top level node needs to be exposed as a View Object instance on the ADF Business Components Data Model. This also means that only the top level node has a representation in the PageDef file as a tree binding and iterator binding reference. Detail nodes are accessed through tree rule definitions that use the accessor mentioned above (or nested collections in the case of POJO or EJB business services). The tree component is configured for single node selection, which however can be declaratively changed for users to press the ctrl key and selecting multiple nodes. In the following, I explain how to create a context menu on the tree for users to delete the selected tree nodes. For this, the context menu item will access a managed bean, which then determines the selected node(s), the internal ADF node bindings and the rows they represent. As mentioned, the ADF Business Components Data Model only needs to expose the top level node data sources, which in this example is an instance of the Locations View Object. For the tree to work, you need to have associations defined between entities, which usually is done for you by Oracle JDeveloper if the database tables have foreign keys defined Note: As a general hint of best practices and to simplify your life: Make sure your database schema is well defined and designed before starting your development project. Don't treat the database as something organic that grows and changes with the requirements as you proceed in your project. Business service refactoring in response to database changes is possible, but should be treated as an exception, not the rule. Good database design is a necessity – even for application developers – and nothing evil. To create the tree component, expand the Data Controls panel and drag the View Object collection to the view. From the context menu, select the tree component entry and continue with defining the tree rules that make up the hierarchical structure. As you see, when pressing the green plus icon  in the Edit Tree Binding  dialog, the data structure, Locations -  Departments – Employees in my sample, shows without you having created a View Object instance for each of the nodes in the ADF Business Components Data Model. After you configured the tree structure in the Edit Tree Binding dialog, you press OK and the tree is created. Select the tree in the page editor and open the Structure Window (ctrl+shift+S). In the Structure window, expand the tree node to access the conextMenu facet. Use the right mouse button to insert a Popup  into the facet. Repeat the same steps to insert a Menu and a Menu Item into the Popup you created. The Menu item text should be changed to something meaningful like "Delete". Note that the custom menu item later is added to the context menu together with the default context menu options like expand and expand all. To define the action that is executed when the menu item is clicked on, you select the Action Listener property in the Property Inspector and click the arrow icon followed by the Edit menu option. Create or select a managed bean and define a method name for the action handler. Next, select the tree component and browse to its binding property in the Property Inspector. Again, use the arrow icon | Edit option to create a component binding in the same managed bean that has the action listener defined. The tree handle is used in the action listener code, which is shown below: public void onTreeNodeDelete(ActionEvent actionEvent) {   //access the tree from the JSF component reference created   //using the af:tree "binding" property. The "binding" property   //creates a pair of set/get methods to access the RichTree instance   RichTree tree = this.getTreeHandler();   //get the list of selected row keys   RowKeySet rks = tree.getSelectedRowKeys();   //access the iterator to loop over selected nodes   Iterator rksIterator = rks.iterator();          //The CollectionModel represents the tree model and is   //accessed from the tree "value" property   CollectionModel model = (CollectionModel) tree.getValue();   //The CollectionModel is a wrapper for the ADF tree binding   //class, which is JUCtrlHierBinding   JUCtrlHierBinding treeBinding =                  (JUCtrlHierBinding) model.getWrappedData();          //loop over the selected nodes and delete the rows they   //represent   while(rksIterator.hasNext()){     List nodeKey = (List) rksIterator.next();     //find the ADF node binding using the node key     JUCtrlHierNodeBinding node =                       treeBinding.findNodeByKeyPath(nodeKey);     //delete the row.     Row rw = node.getRow();       rw.remove();   }          //only refresh the tree if tree nodes have been selected   if(rks.size() > 0){     AdfFacesContext adfFacesContext =                          AdfFacesContext.getCurrentInstance();     adfFacesContext.addPartialTarget(tree);   } } Note: To enable multi node selection for a tree, select the tree and change the row selection setting from "single" to "multiple". Note: a fully pictured version of this post will become available at the end of the month in a PDF summary on ADF Code Corner : http://www.oracle.com/technetwork/developer-tools/adf/learnmore/index-101235.html 

    Read the article

  • Open GL stars are not rendering

    - by Darestium
    I doing Nehe's Open GL Lesson 9. I'm using SFML for windowing, the strange thing is no stars are rendering. #include <SFML/System.hpp> #include <SFML/Window.hpp> #include <SFML/Graphics.hpp> #include <iostream> void processEvents(sf::Window *app); void processInput(sf::Window *app); void renderGlScene(sf::Window *app); void init(); int loadResources(); const int NUM_OF_STARS = 50; float triRot = 0.0f; float quadRot = 0.0f; bool twinkle = false; bool tKey = false; float zoom = 15.0f; float tilt = 90.0f; float spin = 0.0f; unsigned int loop; unsigned int texture_handle[1]; typedef struct { int r, g, b; float distance; float angle; } stars; stars star[NUM_OF_STARS]; int main() { sf::Window app(sf::VideoMode(800, 600, 32), "Nehe Lesson 9"); app.UseVerticalSync(false); init(); if (loadResources() == -1) { return EXIT_FAILURE; } while (app.IsOpened()) { processEvents(&app); processInput(&app); renderGlScene(&app); app.Display(); } return EXIT_SUCCESS; } int loadResources() { sf::Image img_data; // Load Texture if (!img_data.LoadFromFile("data/images/star.bmp")) { std::cout << "Could not load data/images/star.bmp"; return -1; } // Generate 1 texture glGenTextures(1, &texture_handle[0]); // Linear filtering glBindTexture(GL_TEXTURE_2D, texture_handle[0]); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, GL_LINEAR); glTexParameteri(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, GL_LINEAR); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, img_data.GetWidth(), img_data.GetHeight(), 0, GL_RGBA, GL_UNSIGNED_BYTE, img_data.GetPixelsPtr()); return 0; } void processInput(sf::Window *app) { const sf::Input& input = app->GetInput(); if (input.IsKeyDown(sf::Key::T) && !tKey) { tKey = true; twinkle = !twinkle; } if (!input.IsKeyDown(sf::Key::T)) { tKey = false; } if (input.IsKeyDown(sf::Key::Up)) { tilt -= 0.05f; } if (input.IsKeyDown(sf::Key::Down)) { tilt += 0.05f; } if (input.IsKeyDown(sf::Key::PageUp)) { zoom -= 0.02f; } if (input.IsKeyDown(sf::Key::Up)) { zoom += 0.02f; } } void init() { glClearDepth(1.f); glClearColor(0.f, 0.f, 0.f, 0.f); // Enable texturing glEnable(GL_TEXTURE_2D); //glDepthMask(GL_TRUE); // Setup a perpective projection glMatrixMode(GL_PROJECTION); glLoadIdentity(); gluPerspective(45.f, 1.f, 1.f, 500.f); glShadeModel(GL_SMOOTH); glBlendFunc(GL_SRC_ALPHA, GL_ONE); glEnable(GL_BLEND); for (loop = 0; loop < NUM_OF_STARS; loop++) { star[loop].distance = (float)loop / NUM_OF_STARS * 5.0f; // Calculate distance from the centre // Give stars random rgb value star[loop].r = rand() % 256; star[loop].g = rand() % 256; star[loop].b = rand() % 256; } } void processEvents(sf::Window *app) { sf::Event event; while (app->GetEvent(event)) { if (event.Type == sf::Event::Closed) { app->Close(); } if (event.Type == sf::Event::KeyPressed && event.Key.Code == sf::Key::Escape) { app->Close(); } } } void renderGlScene(sf::Window *app) { app->SetActive(); // Clear color depth buffer glClear(GL_COLOR_BUFFER_BIT | GL_DEPTH_BUFFER_BIT); // Apply some transformations glMatrixMode(GL_MODELVIEW); glLoadIdentity(); // Select texture glBindTexture(GL_TEXTURE_2D, texture_handle[0]); for (loop = 0; loop < NUM_OF_STARS; loop++) { glLoadIdentity(); // Reset The View Before We Draw Each Star glTranslatef(0.0f, 0.0f, zoom); // Zoom Into The Screen (Using The Value In 'zoom') glRotatef(tilt, 1.0f, 0.0f, 0.0f); // Tilt The View (Using The Value In 'tilt') glRotatef(star[loop].angle, 0.0f, 1.0f, 0.0f); // Rotate To The Current Stars Angle glTranslatef(star[loop].distance, 0.0f, 0.0f); // Move Forward On The X Plane glRotatef(-star[loop].angle,0.0f,1.0f,0.0f); // Cancel The Current Stars Angle glRotatef(-tilt,1.0f,0.0f,0.0f); // Cancel The Screen Tilt if (twinkle) { glColor4ub(star[(NUM_OF_STARS - loop) - 1].r, star[(NUM_OF_STARS - loop)-1].g, star[(NUM_OF_STARS - loop) - 1].b, 255); glBegin(GL_QUADS); // Begin Drawing The Textured Quad glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.0f, -1.0f, 0.0f); glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.0f, -1.0f, 0.0f); glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.0f, 1.0f, 0.0f); glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.0f, 1.0f, 0.0f); glEnd(); // Done Drawing The Textured Quad } glRotatef(spin,0.0f,0.0f,1.0f); // Rotate The Star On The Z Axis // Assign A Color Using Bytes glColor4ub(star[loop].r, star[loop].g, star[loop].b, 255); glBegin(GL_QUADS); // Begin Drawing The Textured Quad glTexCoord2f(0.0f, 0.0f); glVertex3f(-1.0f,-1.0f, 0.0f); glTexCoord2f(1.0f, 0.0f); glVertex3f( 1.0f,-1.0f, 0.0f); glTexCoord2f(1.0f, 1.0f); glVertex3f( 1.0f, 1.0f, 0.0f); glTexCoord2f(0.0f, 1.0f); glVertex3f(-1.0f, 1.0f, 0.0f); glEnd(); // Done Drawing The Textured Quad spin += 0.01f; // Used To Spin The Stars star[loop].angle += (float)loop / NUM_OF_STARS; // Changes The Angle Of A Star star[loop].distance -= 0.01f; // Changes The Distance Of A Star if (star[loop].distance < 0.0f) { star[loop].distance += 5.0f; // Move The Star 5 Units From The Center star[loop].r = rand() % 256; // Give It A New Red Value star[loop].g = rand() % 256; // Give It A New Green Value star[loop].b = rand() % 256; // Give It A New Blue Value } } } I've looked over the code atleast 10 times now and I can't figure out the problem. Any help would be much appreciated.

    Read the article

  • Refactoring Part 1 : Intuitive Investments

    - by Wes McClure
    Fear, it’s what turns maintaining applications into a nightmare.  Technology moves on, teams move on, someone is left to operate the application, what was green is now perceived brown.  Eventually the business will evolve and changes will need to be made.  The approach to those changes often dictates the long term viability of the application.  Fear of change, lack of passion and a lack of interest in understanding the domain often leads to a paranoia to do anything that doesn’t involve duct tape and bailing twine.  Don’t get me wrong, those have a place in the short term viability of a project but they don’t have a place in the long term.  Add to it “us versus them” in regards to the original team and those that maintain it, internal politics and other factors and you have a recipe for disaster.  This results in code that quickly becomes unmanageable.  Even the most clever of designs will eventually become sub optimal and debt will amount that exponentially makes changes difficult.  This is where refactoring comes in, and it’s something I’m very passionate about.  Refactoring is about improving the process whereby we make change, it’s an exponential investment in the process of change. Without it we will incur exponential complexity that halts productivity. Investments, especially in the long term, require intuition and reflection.  How can we tackle new development effectively via evolving the original design and paying off debt that has been incurred? The longer we wait to ask and answer this question, the more it will cost us.  Small requests don’t warrant big changes, but realizing when changes now will pay off in the long term, and especially in the short term, is valuable. I have done my fair share of maintaining applications and continuously refactoring as needed, but recently I’ve begun work on a project that hasn’t had much debt, if any, paid down in years.  This is the first in a series of blog posts to try to capture the process which is largely driven by intuition of smaller refactorings from other projects. Signs that refactoring could help: Testability How can decreasing test time not pay dividends? One of the first things I found was that a very important piece often takes 30+ minutes to test.  I can only imagine how much time this has cost historically, but more importantly the time it might cost in the coming weeks: I estimate at least 10-20 hours per person!  This is simply unacceptable for almost any situation.  As it turns out, about 6 hours of working with this part of the application and I was able to cut the time down to under 30 seconds!  In less than the lost time of one week, I was able to fix the problem for all future weeks! If we can’t test fast then we can’t change fast, nor with confidence. Code is used by end users and it’s also used by developers, consider your own needs in terms of the code base.  Adding logic to enable/disable features during testing can help decouple parts of an application and lead to massive improvements.  What exactly is so wrong about test code in real code?  Often, these become features for operators and sometimes end users.  If you cannot run an integration test within a test runner in your IDE, it’s time to refactor. Readability Are variables named meaningfully via a ubiquitous language? Is the code segmented functionally or behaviorally so as to minimize the complexity of any one area? Are aspects properly segmented to avoid confusion (security, logging, transactions, translations, dependency management etc) Is the code declarative (what) or imperative (how)?  What matters, not how.  LINQ is a great abstraction of the what, not how, of collection manipulation.  The Reactive framework is a great example of the what, not how, of managing streams of data. Are constants abstracted and named, or are they just inline? Do people constantly bitch about the code/design? If the code is hard to understand, it will be hard to change with confidence.  It’s a large undertaking if the original designers didn’t pay much attention to readability and as such will never be done to “completion.”  Make sure not to go over board, instead use this as you change an application, not in lieu of changes (like with testability). Complexity Simplicity will never be achieved, it’s highly subjective.  That said, a lot of code can be significantly simplified, tidy it up as you go.  Refactoring will often converge upon a simplification step after enough time, keep an eye out for this. Understandability In the process of changing code, one often gains a better understanding of it.  Refactoring code is a good way to learn how it works.  However, it’s usually best in combination with other reasons, in effect killing two birds with one stone.  Often this is done when readability is poor, in which case understandability is usually poor as well.  In the large undertaking we are making with this legacy application, we will be replacing it.  Therefore, understanding all of its features is important and this refactoring technique will come in very handy. Unused code How can deleting things not help? This is a freebie in refactoring, it’s very easy to detect with modern tools, especially in statically typed languages.  We have VCS for a reason, if in doubt, delete it out (ok that was cheesy)! If you don’t know where to start when refactoring, this is an excellent starting point! Duplication Do not pray and sacrifice to the anti-duplication gods, there are excellent examples where consolidated code is a horrible idea, usually with divergent domains.  That said, mediocre developers live by copy/paste.  Other times features converge and aren’t combined.  Tools for finding similar code are great in the example of copy/paste problems.  Knowledge of the domain helps identify convergent concepts that often lead to convergent solutions and will give intuition for where to look for conceptual repetition. 80/20 and the Boy Scouts It’s often said that 80% of the time 20% of the application is used most.  These tend to be the parts that are changed.  There are also parts of the code where 80% of the time is spent changing 20% (probably for all the refactoring smells above).  I focus on these areas any time I make a change and follow the philosophy of the Boy Scout in cleaning up more than I messed up.  If I spend 2 hours changing an application, in the 20%, I’ll always spend at least 15 minutes cleaning it or nearby areas. This gives a huge productivity edge on developers that don’t. Ironically after a short period of time the 20% shrinks enough that we don’t have to spend 80% of our time there and can move on to other areas.   Refactoring is highly subjective, never attempt to refactor to completion!  Learn to be comfortable with leaving one part of the application in a better state than others.  It’s an evolution, not a revolution.  These are some simple areas to look into when making changes and can help get one started in the process.  I’ve often found that refactoring is a convergent process towards simplicity that sometimes spans a few hours but often can lead to massive simplifications over the timespan of weeks and months of regular development.

    Read the article

  • GLSL: Strange light reflections [Solved]

    - by Tom
    According to this tutorial I'm trying to make a normal mapping using GLSL, but something is wrong and I can't find the solution. The output render is in this image: Image1 in this image is a plane with two triangles and each of it is different illuminated (that is bad). The plane has 6 vertices. In the upper left side of this plane are 2 identical vertices (same in the lower right). Here are some vectors same for each vertice: normal vector = 0, 1, 0 (red lines on image) tangent vector = 0, 0,-1 (green lines on image) bitangent vector = -1, 0, 0 (blue lines on image) here I have one question: The two identical vertices does need to have the same tangent and bitangent? I have tried to make other values to the tangents but the effect was still similar. Here are my shaders Vertex shader: #version 130 // Input vertex data, different for all executions of this shader. in vec3 vertexPosition_modelspace; in vec2 vertexUV; in vec3 vertexNormal_modelspace; in vec3 vertexTangent_modelspace; in vec3 vertexBitangent_modelspace; // Output data ; will be interpolated for each fragment. out vec2 UV; out vec3 Position_worldspace; out vec3 EyeDirection_cameraspace; out vec3 LightDirection_cameraspace; out vec3 LightDirection_tangentspace; out vec3 EyeDirection_tangentspace; // Values that stay constant for the whole mesh. uniform mat4 MVP; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Output position of the vertex, in clip space : MVP * position gl_Position = MVP * vec4(vertexPosition_modelspace,1); // Position of the vertex, in worldspace : M * position Position_worldspace = (M * vec4(vertexPosition_modelspace,1)).xyz; // Vector that goes from the vertex to the camera, in camera space. // In camera space, the camera is at the origin (0,0,0). vec3 vertexPosition_cameraspace = ( V * M * vec4(vertexPosition_modelspace,1)).xyz; EyeDirection_cameraspace = vec3(0,0,0) - vertexPosition_cameraspace; // Vector that goes from the vertex to the light, in camera space. M is ommited because it's identity. vec3 LightPosition_cameraspace = ( V * vec4(LightPosition_worldspace,1)).xyz; LightDirection_cameraspace = LightPosition_cameraspace + EyeDirection_cameraspace; // UV of the vertex. No special space for this one. UV = vertexUV; // model to camera = ModelView vec3 vertexTangent_cameraspace = MV3x3 * vertexTangent_modelspace; vec3 vertexBitangent_cameraspace = MV3x3 * vertexBitangent_modelspace; vec3 vertexNormal_cameraspace = MV3x3 * vertexNormal_modelspace; mat3 TBN = transpose(mat3( vertexTangent_cameraspace, vertexBitangent_cameraspace, vertexNormal_cameraspace )); // You can use dot products instead of building this matrix and transposing it. See References for details. LightDirection_tangentspace = TBN * LightDirection_cameraspace; EyeDirection_tangentspace = TBN * EyeDirection_cameraspace; } Fragment shader: #version 130 // Interpolated values from the vertex shaders in vec2 UV; in vec3 Position_worldspace; in vec3 EyeDirection_cameraspace; in vec3 LightDirection_cameraspace; in vec3 LightDirection_tangentspace; in vec3 EyeDirection_tangentspace; // Ouput data out vec3 color; // Values that stay constant for the whole mesh. uniform sampler2D DiffuseTextureSampler; uniform sampler2D NormalTextureSampler; uniform sampler2D SpecularTextureSampler; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Light emission properties // You probably want to put them as uniforms vec3 LightColor = vec3(1,1,1); float LightPower = 40.0; // Material properties vec3 MaterialDiffuseColor = texture2D( DiffuseTextureSampler, vec2(UV.x,-UV.y) ).rgb; vec3 MaterialAmbientColor = vec3(0.1,0.1,0.1) * MaterialDiffuseColor; //vec3 MaterialSpecularColor = texture2D( SpecularTextureSampler, UV ).rgb * 0.3; vec3 MaterialSpecularColor = vec3(0.5,0.5,0.5); // Local normal, in tangent space. V tex coordinate is inverted because normal map is in TGA (not in DDS) for better quality vec3 TextureNormal_tangentspace = normalize(texture2D( NormalTextureSampler, vec2(UV.x,-UV.y) ).rgb*2.0 - 1.0); // Distance to the light float distance = length( LightPosition_worldspace - Position_worldspace ); // Normal of the computed fragment, in camera space vec3 n = TextureNormal_tangentspace; // Direction of the light (from the fragment to the light) vec3 l = normalize(LightDirection_tangentspace); // Cosine of the angle between the normal and the light direction, // clamped above 0 // - light is at the vertical of the triangle -> 1 // - light is perpendicular to the triangle -> 0 // - light is behind the triangle -> 0 float cosTheta = clamp( dot( n,l ), 0,1 ); // Eye vector (towards the camera) vec3 E = normalize(EyeDirection_tangentspace); // Direction in which the triangle reflects the light vec3 R = reflect(-l,n); // Cosine of the angle between the Eye vector and the Reflect vector, // clamped to 0 // - Looking into the reflection -> 1 // - Looking elsewhere -> < 1 float cosAlpha = clamp( dot( E,R ), 0,1 ); color = // Ambient : simulates indirect lighting MaterialAmbientColor + // Diffuse : "color" of the object MaterialDiffuseColor * LightColor * LightPower * cosTheta / (distance*distance) + // Specular : reflective highlight, like a mirror MaterialSpecularColor * LightColor * LightPower * pow(cosAlpha,5) / (distance*distance); //color.xyz = E; //color.xyz = LightDirection_tangentspace; //color.xyz = EyeDirection_tangentspace; } I have replaced the original color value by EyeDirection_tangentspace vector and then I got other strange effect but I can not link the image (not eunogh reputation) Is it possible that with this shaders is something wrong, or maybe in other place in my code e.g with my matrices?

    Read the article

  • Agilist, Heal Thyself!

    - by Dylan Smith
    I’ve been meaning to blog about a great experience I had earlier in the year at Prairie Dev Con Calgary.  Myself and Steve Rogalsky did a session that we called “Agilist, Heal Thyself!”.  We used a format that was new to me, but that Steve had seen used at another conference.  What we did was start by asking the audience to give us a list of challenges they had had when adopting agile.  We wrote them all down, then had everybody vote on the most interesting ones.  Then we split into two groups, and each group was assigned one of the agile challenges.  We had 20 minutes to discuss the challenge, and suggest solutions or approaches to improve things.  At the end of the 20 minutes, each of the groups gave a brief summary of their discussion and learning's, then we mixed up the groups and repeated with another 2 challenges. The 2 groups I was part of had some really interesting discussions, and suggestions: Unfinished Stories at the end of Sprints The first agile challenge we tackled, was something that every single Scrum team I have worked with has struggled with.  What happens when you get to the end of a Sprint, and there are some stories that are only partially completed.  The team in question was getting very de-moralized as they felt that every Sprint was a failure as they never had a set of fully completed stories. How do you avoid this? and/or what do you do when it happens? There were 2 pieces of advice that were well received: 1. Try to bring stories to completion before starting new ones.  This is advice I give all my Scrum teams.  If you have a 3-week sprint, what happens all too often is you get to the end of week 2, and a lot of stories are almost done; but almost none are completely done.  This is a Bad Thing.  I encourage the teams I work with to only start a new story as a very last resort.  If you finish your task look at the stories in progress and see if there’s anything you can do to help before moving onto a new story.  In the daily standup, put a focus on seeing what stories got completed yesterday, if a few days go by with none getting completed, be sure this fact is visible to the team and do something about it.  Something I’ve been doing recently is introducing WIP (Work In Progress) limits while using Scrum.  My current team has 2-week sprints, and we usually have about a dozen or stories in a sprint.  We instituted a WIP limit of 4 stories.  If 4 stories have been started but not finished then nobody is allowed to start new stories.  This made it obvious very quickly that our QA tasks were our bottleneck (we have 4 devs, but only 1.5 testers).  The WIP limit forced the developers to start to pickup QA tasks before moving onto the next dev tasks, and we ended our sprints with many more stories completely finished than we did before introducing WIP limits. 2. Rather than using time-boxed sprints, why not just do away with them altogether and go to a continuous flow type approach like KanBan.  Limit WIP to keep things under control, but don’t have a fixed time box at the end of which all tasks are supposed to be done.  This eliminates the problem almost entirely.  At some points in the project (releases) you need to be able to burn down all the half finished stories to get a stable release build, but this probably occurs less often than every sprint, and there are alternative approaches to achieve it using branching strategies rather than forcing your team to try to get to Zero WIP every 2-weeks (e.g. when you are ready for a release, create a new branch for any new stories, but finish all existing stories in the current branch and release it). Trying to Introduce Agile into a team with previous Bad Agile Experiences One of the agile adoption challenges somebody described, was he was in a leadership role on a team he had recently joined – lets call him Dave.  This team was currently very waterfall in their ALM process, but they were about to start on a new green-field project.  Dave wanted to use this new project as an opportunity to do things the “right way”, using an Agile methodology like Scrum, adopting TDD, automated builds, proper branching strategies, etc.  The problem he was facing is everybody else on the team had previously gone through an “Agile Adoption” that was a horrible failure.  Dave blamed this failure on the consultant brought in previously to lead this agile transition, but regardless of the reason, the team had very negative feelings towards agile, and was very resistant to trying it out again.  Dave possibly had the authority to try to force the team to adopt Agile practices, but we all know that doesn’t work very well.  What was Dave to do? Ultimately, the best advice was to question *why* did Dave want to adopt all these various practices. Rather than trying to convince his team that these were the “right way” to run a dev project, and trying to do a Big Bang approach to introducing change.  He would be better served by identifying problems the team currently faces, have a discussion with the team to get everybody to agree that specific problems existed, then have an open discussion about ways to address those problems.  This way Dave could incrementally introduce agile practices, and he doesn’t even need to identify them as “agile” practices if he doesn’t want to.  For example, when we discussed with Dave, he said probably the teams biggest problem was long periods without feedback from users, then finding out too late that the software is not going to meet their needs.  Rather than Dave jumping right to introducing Scrum and all it entails, it would be easier to get buy-in from team if he framed it as a discussion of existing problems, and brainstorming possible solutions.  And possibly most importantly, don’t try to do massive changes all at once with a team that has not bought-into those changes.  Taking an incremental approach has a greater chance of success. I see something similar in my day job all the time too.  Clients who for one reason or another claim to not be fans of agile (or not ready for agile yet).  But then they go on to ask me to help them get shorter feedback cycles, quicker delivery cycles, iterative development processes, etc.  It’s kind of funny at times, sometimes you just need to phrase the suggestions in terms they are using and avoid the word “agile”. PS – I haven’t blogged all that much over the past couple of years, but in an attempt to motivate myself, a few of us have accepted a blogger challenge.  There’s 6 of us who have all put some money into a pool, and the agreement is that we each need to blog at least once every 2-weeks.  The first 2-week period that we miss we’re eliminated.  Last person standing gets the money.  So expect at least one blog post every couple of weeks for the near future (I hope!).  And check out the blogs of the other 5 people in this blogger challenge: Steve Rogalsky: http://winnipegagilist.blogspot.ca Aaron Kowall: http://www.geekswithblogs.net/caffeinatedgeek Tyler Doerkson: http://blog.tylerdoerksen.com David Alpert: http://www.spinthemoose.com Dave White: http://www.agileramblings.com (note: site not available yet.  should be shortly or he owes me some money!)

    Read the article

  • CodePlex Daily Summary for Friday, September 28, 2012

    CodePlex Daily Summary for Friday, September 28, 2012Popular ReleasesWPUtils: WPUtils 1.2: Just fixed an issue related to isolated storage path for ChoosePhotoBehavior. Specifically CreateDirectory method only accepts relative path, but was given a "/photos/" path which would result in exception. Please make sure you have this fix if you are using ChoosePhotoBehavior! NOTE: Windows Phone SDK 7.1 or higher is required.TFS Timesheets: TFS Timesheets 2.0: New features: Visual Studio 2012 support Bug fixes: Scaling mode inherited rather than font scalingCRM 2011 Visual Ribbon Editor: Visual Ribbon Editor 1.1 Beta: Visual Ribbon Editor 1.1 Beta What's New: Fixed scrolling issue in UnHide dialog Added support for connecting via ADFS / IFD Added support for more than one action for a button Added support for empty StringParameter for Javascript functions Fixed bug in rule CrmClientTypeRule when selecting Outlook option Extended Prefix field in New Button dialogFree Aspx Image Gallery: Free Aspx Image Gallery Release V1: This is first basic release of my free aspx image gallery project. It is free to use and modify by the user without any need of providing any credit to me.Simple Microsoft Excel Document Converter (Convert To XLS, XLSX, PDF, XPS): ExcelDocConverter 0.1 Beta: Initial Release Microsoft Excel Documents Converter. Microsoft Excel 1997-2003 (XLS) Microsoft Excel 2007/2010 (XLSX) Portable Document Format (PDF) Microsoft XPS Document (XPS) Difference between NET2.0 and NET3.5 This program uses .NET Framework runtime library to run. Basically, they are no differences. Only the runtime library version is different. For older computers, i.e. Windows XP, might not have .NET Framework 3.5 installed, then use NET2.0 in stead. But, some Windows XP SP2 mig...Office File Properties: Office File Properties 3.3.1: Bug fix. Convert file extension to lowercase before checking.LoBDb.NET: LoBDb.NET 1.0.9: Centido.Core library: 1) SQL Server script bug fix: an error when changing the MaxLength property of an indexed string column or when changing the Precision-Scale properties of a decimal column. LobDb.NET Manager: 1) Changing the Precision, Scale, Default Value, Minimum and Maximum properties of a decimal column now enables the Save button. 2) The MaxLength property of a string column and the Precision+Scale values of a decimal column are now displayed in the column list. 3) Changing the Min...Chaos games: Chaos games: Small app for generating fractals using chaos gamesVisual Studio Icon Patcher: Version 1.5.2: This version contains no new images from v1.5.1 Contains the following improvements: Better support for detecting the installed languages The extract & inject commands won’t run if Visual Studio is running You may now run in extract or inject mode The p/invoke code was cleaned up based on Code Analysis recommendations When a p/invoke method fails the Win32 error message is now displayed Error messages use red text Status messages use green textMCEBuddy 2.x: MCEBuddy 2.2.16: Changelog for 2.2.16 (32bit and 64bit) Now a standalone remote client also available to control the Engine remotely. 1. Added support for remote connections for status and configuration. MCEBuddy now uses port 23332. The remote server name, remote server port and local server port can be updated from the MCEBuddy.conf file BUT the Service or GUI needs to be restarted (i.e. reboot or restart service or restart program) for it to take effect. Refer to documentation for more details http://mce...ZXing.Net: ZXing.Net 0.9.0.0: On the way to a release 1.0 the API should be stable now with this version. sync with rev. 2393 of the java version improved api better Unity support Windows RT binaries Windows CE binaries new Windows Service demo new WPF demo WindowsCE Hotfix: Fixes an error with ISO8859-1 encoding and scannning of QR-Codes. The hotfix is only needed for the WindowsCE platform.SSIS GoogleAnalyticsSource: Version 1.1 Alpha 2: The component uses now the Google API V2.4 including the management API.MVC Bootstrap: MVC Boostrap 0.5.1: A small demo site, based on the default ASP.NET MVC 3 project template, showing off some of the features of MVC Bootstrap. This release uses Entity Framework 5 for data access and Ninject 3 for dependency injection. If you download and use this project, please give some feedback, good or bad!menu4web: menu4web 1.0 - free javascript menu for web sites: menu4web 1.0 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 21 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Rawr: Rawr 5.0.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr Addon (NOT UPDATED YET FOR MOP)We now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including ba...Coevery - Free CRM: Coevery 1.0.0.26: The zh-CN issue has been solved. We also add a project management module.VidCoder: 1.4.1 Beta: Updated to HandBrake 4971. This should fix some issues with stuck PGS subtitles. Fixed build break which prevented pre-compiled XML serializers from showing up. Fixed problem where a preset would get errantly marked as modified when re-opening the encode settings window or importing a new preset.JSLint for Visual Studio 2010: 1.4.0: VS2012 support is alphaBlackJumboDog: Ver5.7.2: 2012.09.23 Ver5.7.2 (1)InetTest?? (2)HTTP?????????????????100???????????Player Framework by Microsoft: Player Framework for Windows 8 (Preview 6): IMPORTANT: List of breaking changes from preview 5 Added separate samples download with .vsix dependencies instead of source dependencies Support for FreeWheel SmartXML ad responses Support for Smooth Streaming SDK DownloaderPlugins Support for VMAP and TTML polling for live scenarios Support for custom smooth streaming byte stream and scheme handlers Support for new play time and position tracking plugin Added IsLiveChanged event Added AdaptivePlugin.MaxBitrate property Add...New ProjectsChaos games: Small app to generating fractals using chaos gamesDocument Digitalization System: This system will allow the users with on one or more PCs to digitalize pdf files and store it or export it to other file formats.ExternalTokenAnalysisOffline: SPUser?UserToken????????????????。FinalProjectSeniorProject: ***Unfinished*** Senior project build GL Ponpes Selamat Kendal: Aplikasi Akuntansi Sekolah Pondok Pesantren Modern Selamat KendalHealth Care Manager: One of keynote planned for the Brazzaville Microsoft event coming soon.Orchard Commerce History with PayPal: Project expands on Nwazet.Commerce module (and is required for this module to work). Adds a purchase history, product role associations, and PayPal.PDF.NET: PWMIS ?????? Ver 4.5 ???? SMS Egypt: This project is intended to make it easy for people to send SMS to their customers using SMS gateways inside and outside Egypt. Strong Caml: Use the familiar CAML syntax, but now do it in strongly-typed, dynamic code. Just follow Visual Studio's IntelliSense, and your CAML query can't go wrong!TrainingFrameWork: TrainingFrameWork

    Read the article

  • SOA Suite Integration: Part 3: Loading files

    - by Anthony Shorten
    One of the most common scenarios in SOA Integration is the loading of a file into the product from an external source. In Oracle SOA Suite there is a File Adapter that can process many file types into your BPEL process. For this example I will use the File Adapter to load a file of user and emails to update the user object within the Oracle Utilities Application Framework. Remember you can repeat this process with other objects and other file types. Again I am illustrating the ease of integration. The first thing is to create an empty BPEL process that will hold our flow. In Oracle JDeveloper this can be achieved by specifying the Define Service Later template (as other templates have predefined inputs and outputs and in this case we want to specify those). So I will create simpleFileLoad process to house our process. You will start with an empty canvas so you need to first specify the load part of the process using the File Adapter. Select the File Adapter from the Component Palette under BPEL Services and drag and drop it to the left side Partner Links (left is input). You name the Service. In this case I chose LoadFile. Press Next. We will define the interface as part of the wizard so select Define from operation and schema (specified later). Press Next. We are going to choose Read File to denote that we will read the file and specify the default Operation Name as Read. Press Next. The next step is to tell the Adapter the location of the files, how to process them and what to do with them after they have been processed. I am using hardcoded locations in this example but you can have logical locations as well. Press Next. I am now going to tell the adapter how to recognize the files I want to load. In my case I am using CSV files and more importantly I am tell the adapter to run the process for each record in the file it encounters. Press Next. Now, I tell the adapter how often I want to poll for the files. I have taken the defaults. Press Next. At this stage I have no explanation of the format of the input. So I am going to invoke the Native Format Wizard which will guide me through the process of creating the file input format. Clicking the purple cog icon will start the wizard. After an introduction screen (not shown), you specify the format of the input file. The File Adapter supports multiple format types. For this example, I will use Delimited as I am going to load a CSV file. Press Next. The best way for the wizard to work is with a sample. I have a sample file and the wizard will ask how much of the file to use as a template. I will use the defaults. Note: If you are using a language that has other languages other than US-ASCII, it is at this point you specify the character set to use.  Press Next. The sample contains multiple instances of a single record type. The wizard supports complex types as well. We will use the appropriate setting for our file. Press Next. You have to specify the file element and the record element. This will be used by the input wizard to translate the CSV data into an XML structure (this will make sense later). I am using LoadUsers as my file delimiter (root element) and User Record as my record root element. Press Next. As the file is CSV the delimiter is "," so I will also specify that the End Of Line (EOL) indicator indicates the end of a record. Press Next. Up until this point your have not given the columns their names. In my case my sample includes the column names in the first record. This is not always the case but you can specify the names and formats of columns in this dialog (not shown). Press Next. The wizard now generates the schema for the input file. You can specify a name for the schema. I have used userupdate.xsd. We want to verify the schema so press Test. You can test the schema by specifying an input sample. and pressing the green play button. You will see the delimiters you specified earlier for the file and the records. Press Ok to continue. A confirmation screen will be displayed showing you the location of the schema in your project. Press Finish to return to the File Adapter configuration. You will now see the schema and elements prepopulated from the wizard. Press Next. The File Adapter configuration is now complete. Press Finish. Now you need to receive the input from the LoadFile component so we need to place a Receive node in the BPEL process by drag and dropping the Receive component from the Component Palette under BPEL Constructs onto the BPEL process. We link the receive process with the LoadFile component by dragging the left most connect node of the Receive node to the LoadFile component. Once the link is established you need to name the Receive node appropriately and as in the post of the last part of this series you need to generate input variables for the BPEL process to hold the input records in. You need to now add the product Web Service. The process is the same as described in the post of the last part of this series. You drop the Web Service BPEL Service onto the right side of the process and fill in the details of the WSDL URL . You also have to add an Invoke node to call the service and generate the input and outputs variables for the call in the Invoke node. Now, to get the inputs from File to the service. You have to use a Transform (you can use an Assign action but a Transform action is more flexible). You drag and drop the Transform component from the Component Palette under Oracle Extensions and place it between the Receive and Invoke nodes. We name the Transform Node, Mapper File and associate the source of the mapping the schema from the Receive node and the output will be the input variable from the Invoke node. We now build the transform. We first map the user and email attributes by drag and drop the elements from the left to the right. The reason we needed to use the transform is that we will be telling the AS-User service that we want to issue an update action. Remember when we registered the service we actually used Read as the default. If we do not otherwise inform the service to use the Update action it will use the Read action instead (which is not desired). To specify the update action you need to click on the transactionType node on the right and select Set Text to set the action. You need to specify the transactionType of UPD (for update). The mapping is now complete. The final BPEL process is ready for deployment. You then deploy the BPEL process to the server and to test the service by simply dropping a file, in the same pattern/name as you specified, in the directory you specified in the File Adapter. You will see each record as a separate instance entry in the Fusion Middleware Control console. You can now load files into the product. You can repeat this process for each type of file to process. While this was a simple example it illustrates the method of loading data can be achieved using SOA Suite in conjunction with our products.

    Read the article

  • Notifications for Expiring DBSNMP Passwords

    - by Courtney Llamas
    Most user accounts these days have a password profile on them that automatically expires the password after a set number of days.   Depending on your company’s security requirements, this may be as little as 30 days or as long as 365 days, although typically it falls between 60-90 days. For a normal user, this can cause a small interruption in your day as you have to go get your password reset by an admin. When this happens to privileged accounts, such as the DBSNMP account that is responsible for monitoring database availability, it can cause bigger problems. In Oracle Enterprise Manager 12c you may notice the error message “ORA-28002: the password will expire within 5 days” when you connect to a target, or worse you may get “ORA-28001: the password has expired". If you wait too long, your monitoring will fail because the password is locked out. Wouldn’t it be nice if we could get an alert 10 days before our DBSNMP password expired? Thanks to Oracle Enterprise Manager 12c Metric Extensions (ME), you can! See the Oracle Enterprise Manager Cloud Control Administrator’s Guide for more information on Metric Extensions. To create a metric extension, select Enterprise / Monitoring / Metric Extensions, and then click on Create. On the General Properties screen select either Cluster Database or Database Instance, depending on which target you need to monitor.  If you have both RAC and Single instance you may need to create one for each. In this example we will create a Cluster Database metric.  Enter a Name for the ME and a Display Name. Then select SQL for the Adapter.  Adjust the Collection Schedule as desired, for this example we will collect this metric every 1 day. Notice for metric collected every day, we can determine the exact time we want to collect. On the Adapter page, enter the query that you wish to execute.  In this example we will use the query below that specifically checks for the DBSNMP user that is expiring within 10 days. Of course, you can adjust this query to alert for any user that can cause an outage such as an application account or service account such as RMAN. select username, account_status, trunc(expiry_date-sysdate) days_to_expirefrom dba_userswhere username = 'DBSNMP'and expiry_date is not null; The next step is to create the columns to store the data returned from the query.  Click Add and add a column for each of the fields in the same order that data is returned.  The table below will help you complete the column additions. Name Display Name Column Type Value Type Metric Category Unit Username User Name Key String Security AccountStatus Account Status Data String Security DaysToExpire Days Until Expiration Data Number Security Days When creating the DaysToExpire column, you can add a default threshold here for Warning and Critical (say < 10 and 5).  When all columns have been added, click Next. On the Credentials page, you can choose to use the default monitoring credentials or specify new credentials.  We will use the default credentials established for our target (dbsnmp). The next step is to test your Metric Extension.  Click on Add to select a target for testing, then click Select. Now click the button Run Test to execute the test against the selected target(s). We can see in the example below that the Metric Extension has executed and returned a value of 68 days to expire. Click Next to proceed. Review the metric extension in the final screen and click Finish. The metric will be created in Editable status.  Select the metric, click Actions and select Deployable Draft. You can do this once more to move to Published. Finally, we want to apply this metric to a target. When managing many targets, it’s best to add your metric to a template, for details on adding a Metric Extension to a template see the Administrator’s Guide. For this example, we will deploy this to a target directly. Select Actions / Deploy to Targets. Click Add and select the target you wish to deploy to and click Submit.  Once deployment is complete, we can go to the target and view the Metric & Collection Settings to see the new metric and its thresholds.   After some time, you will find the metric has collected and the days to expiration for DBSNMP user can be seen in the All Metrics view.   For metrics collected once per day, you may have to wait up to 24 hours to see the metric and current severity. In the example below, the current severity is Clear (green check) as it is not scheduled to expire within 10 days. To test the notification, we can edit the thresholds for the new metric so they trigger an alert.  Our password expires in 139 days, so we’ll change our Warning to 140 and leave Critical at 5, in our example we also changed the collection time to every 5 minutes.  At the next collection, you’ll find that the current severity changes to a Warning and any related Incident Rules would be triggered to create an Incident or Notification as desired. Now that you get a notification that your DBSNMP passwords is about to expire, you can use OEM Command Line Interface (EM CLI) verb update_db_password to change it at both the database target and the OEM target in one step.  The caveat is you must know the existing password to use the update_db_password command.  To learn more about EM CLI, see the Oracle Enterprise Manager Command Line Interface Guide.  Below is an example of changing the password with the update_db_password verb.  $ ./emcli update_db_password -target_name=emrep -target_type=oracle_database -user_name=dbsnmp -change_at_target=yes -change_all_references=yes Enter value for old_password :Enter value for new_password :Enter value for retype_new_password :Successfully submitted a job to change the password in Enterprise Manager and on the target database: "emrep"Execute "emcli get_jobs -job_id=FA66C1C4D663297FE0437656F20ACC84" to check the status of the job.Search for job name "CHANGE_PWD_JOB_FA66C1C4D662297FE0437656F20ACC84" on the Jobs home page to check job execution details. The subsequent job created will typically run quickly enough that a blackout is not needed, however if you submit a script with many targets to change, your job may run slower so adding a blackout to the script is recommended. $ ./emcli get_jobs -job_id=FA66C1C4D663297FE0437656F20ACC84 Name Type Job ID Execution ID Scheduled Completed TZ Offset Status Status ID Owner Target Type Target Name CHANGE_PWD_JOB_FA66C1C4D662297FE0437656F20ACC84 ChangePassword FA66C1C4D663297FE0437656F20ACC84 FA66C1C4D665297FE0437656F20ACC84 2014-05-28 09:39:12 2014-05-28 09:39:18 GMT-07:00 Succeeded 5 SYSMAN oracle_database emrep After implementing the above Metric Extension and using the EM CLI update_db_password verb, you will be able to stay on top of your DBSNMP password changes without experiencing an unplanned monitoring outage.  

    Read the article

  • How to Control Screen Layouts in LightSwitch

    - by ChrisD
    Visual Studio LightSwitch has a bunch of screen templates that you can use to quickly generate screens. They give you good starting points that you can customize further. When you add a new screen to your project you see a set of screen templates that you can choose from. These templates lay out all the related data you choose to put on a screen automatically for you. And don’t under estimate them; they do a great job of laying out controls in a smart way. For instance, a tab control will be used when you select more than one related set of data to display on a screen. However, you’re not limited to taking the layout as is. In fact, the screen designer is pretty flexible and allows you to create stacks of controls in a variety of configurations. You just need to visualize your screen as a series of containers that you can lay out in rows and columns. You then place controls or stacks of controls into these areas to align the screen exactly how you want. If you’re new in Visual Studio LightSwitch, you can see this tutorial. OK, Let’s start with a simple example. I have already designed my data entities for a simple order tracking system similar to the Northwind database. I also have added a Search Data  Screen to search my Products already. Now I will add a new Details Screen for my Products and make it the default screen via the “Add New Screen” dialog: The screen designer picks a simple layout for me based on the single entity I chose, in this case Product. Hit F5 to run the application, select a Product on the search screen to open the Product Details Screen. Notice that it’s pretty simple because my entity is simple. Click the “Customize” button in the top right of the screen so we can start tweaking it. The left side of the screen shows the containership of controls and data bindings (called the content tree) and the right side shows the live preview with data. Notice that we have a simple layout of two rows but only one row is populated (with a vertical stack of controls in this case). The bottom row is empty. You can envision the screen like this: Each container will display a group of data that you select. For instance in the above screen, the top row is set to a vertical stack control and the group of data to display is coming from Product. So when laying out screens you need to think in terms of containers of controls bound to groups of data. To change the data to which a container is bound, select the data item next to the container: You can select the “New Group” item in order to create more containers (or controls) within the current container. For instance to totally control the layout, select the Product in the top row and hit the delete key. This will delete the vertical stack and therefore all the controls on the screen. The content tree will still have two rows, but the rows are now both empty. If you want a layout of four containers (two rows and two columns) then select “New Group” for the data item and then change the vertical stack control to “Two Columns” for both of the rows as shown here: You can keep going on and on by selecting new groups and choosing between rows or columns. Here’s a layout with 8 containers, 4 rows and 2 columns: And here is a layout with 7 content areas; one row across the top of the screen and three rows with two columns below that: When you select Choose Content and select a data item like Product it will populate all the controls within the container (row or column in a vertical stack) however you have complete control on what to display within each group. You can delete fields you don’t want to display and/or change their controls. You can also change the size of controls and how they display by changing the settings in the properties window. If you are in the Screen Designer (and not the customization mode like we are here) you can also drag-drop data items from the left-hand side of the screen to the content tree. Note, however, that not all areas of the tree will allow you to drop a data item if there is a binding already set to a different set of data. For instance you can’t drop a Customer ID into the same group as a Product if they originate from different entities. To get around this, all you need to do is create a new group and content area as shown above. Let’s take a more complex example that deals with more than just product. I want to design a complex screen that displays Products and their Category, as well as all the OrderDetails for which that product is selected. This time I will create a new screen and select List and Details, select the Products screen data, and include the related OrderDetails. However I’m going to totally change the layout so that a Product grid is at the top left and below that is the selected Product detail. Below that will be the Category text fields and image in two columns below. On the right side I want the OrderDetails grid to take up the whole right side of the screen. All this can be done in customization mode while you’re debugging the application. To do this, I first deleted all the content items in the tree and then re-created the content tree as shown in the image below. I also set the image to be larger and the description textbox to be 5 rows using the property window below the live preview. I added the green lines to indicate the containers and show how it maps to the content tree (click to enlarge): I hope this demystifies the screen designer a little bit. Remember that screen templates are excellent starting points – you can take them as-is or customize them further. It takes a little fooling around with customizing screens to get them to do exactly what you want but there are a ton of possibilities once you get the hang of it. Stay tuned for more information on how to create your own screen templates that show up in the “Add New Screen” dialog. Enjoy! The tutorial that might be interested: Adding Custom Control In LightSwitch

    Read the article

  • Simplifying Human Capital Management with Mobile Applications

    - by HCM-Oracle
    By Aaron Green If you're starting to think 'mobility' is a recurring theme in your reading, you'd be right. For those who haven't started to build organisational capabilities to leverage it, it's fair to say you're late to the party. The good news: better late than never. Research firm eMarketer says the worldwide smartphone audience will total 1.75 billion this year, while communications technology and services provider Ericsson suggests smartphones will triple to 5.6 billion globally by 2019. It should be no surprise, smart phone adoption is reaching the farthest corners of the globe; the subsequent impact of enterprise applications enabled by these devices is driving business performance improvement and will continue to do so. Companies using advanced workforce analytics can add significantly to the bottom line, while impacting customer satisfaction, quality and productivity. It's a statement that makes most business leaders sit forward in their chairs. Achieving these three standards is like sipping The Golden Elixir for the business world. No-one would argue their importance. So what are 'advanced workforce analytics?' Simply, they're unprecedented access to workforce trends and performance markers. Many are made possible by a mobile world and the enterprise applications that come with it on smart devices. Some refer to it as 'the consumerisation of IT'. As this phenomenon has matured and become more widely appreciated it has impacted the spectrum of functional units within an enterprise differently, but powerfully. Whether it's sales, HR, marketing, IT, or operations, all have benefited from a more mobile approach. It has been the catalyst for improvement in, and management of, the employee experience. The net result of which is happier customers. The obvious benefits but the lesser realised impact Most people understand that mobility allows for greater efficiency and productivity, collaboration and flexibility, but how that translates into business outcomes within the various functional groups is lesser known. In actuality mobility has helped galvanise partnerships between cross-functional groups within the enterprise. Where in some quarters it was once feared mobility could fragment a workforce, its rallying cry of support is coming from what you might describe as an unlikely source - HR. As the bedrock of an enterprise, it is conceivable HR might contemplate the possible negative impact of a mobile workforce that no-longer sits in an office, at the same desks every day. After all, who would know what they were doing or saying? How would they collaborate? It's reasonable to see why HR might have a legitimate claim to try and retain as much 'perceived control' as possible. The reality however is mobility has emancipated human capital and its management. Mobility and enterprise applications are expediting decision making. Google calls it Zero Moment of Truth, or ZMOT. It enables smoother operation and can contribute to faster growth. From a collaborative perspective, with the growing use of enterprise social media, which in many cases is being driven by HR, workforce planning and the tangible impact of change is much easier to map. This in turn provides a platform from which individuals and teams can thrive. With more agility and ability to anticipate, staff satisfaction and retention is higher, and real time feedback constant. The management team can save time, energy and costs with more accurate data, which is then intelligently applied across the workforce to truly engage with staff, customers and partners. From a human capital management (HCM) perspective, mobility can help you close the loop on true talent management. It can enhance what managers can offer and what employees can provide in return. It can create nested relationships and powerful partnerships. IT and HR - partners and stewards of mobility One effect of enterprise mobility is an evolution in the nature of the relationship between HR and IT from one of service provision to partnership. The reason for the dynamic shift is largely due to the 'bring your own device' (BYOD) movement, which is transitioning to a 'bring your own application' (BYOA) scenario. As enterprise technology has in some ways reverse-engineered its solutions to help manage this situation, the partnership between IT (the functional owner) and HR (the strategic enabler) is deeply entrenched. And it has to be. The CIO and the HR leader are faced with compliance and regulatory issues and concerns around information security and personal privacy on a daily basis, complicated by global reach and varied domestic legislation. There are tens of thousands of new mobile apps entering the market each month and, unlike many consumer applications which get downloaded but are often never opened again after initial perusal, enterprise applications are being relied upon by functional groups, not least by HR to enhance people management. It requires a systematic approach across all applications in use within the enterprise in order to ensure they're used to best effect. No turning back, and no desire to With real time analytics on performance and the ability for immediate feedback, there is no turning back for managers. In my experience with Oracle, our customers' operational efficiency is at record levels. It's clear as a result of the combination of individual KPIs and organisational goals, CIOs have been able to give HR leaders the ability to build predictive models that feed into an enterprise organisations' evolving strategy. It also helps them ensure regulatory compliance much more easily. Once an arduous task, with mobile enabled automation and quality data, compliance is simpler. Their world has changed for the better. For the CIO, mobility also assists them to optimise performance. While it doesn't come without challenges, mobile-enabled applications and the native experience users have with them means employees don't need high-level technical expertise to train users. It reduces the training and engagement required from the IT team so they can focus on other things that deliver value to the bottom line; all the while lowering the cost of assets and related maintenance work by simplifying processes. Rewards of a mobile enterprise outweigh risks With mobile tools allowing us to increasingly integrate our personal and professional lives, terms like "office hours" are becoming irrelevant, so work/life balance is a cultural must. Enterprises are expected to offer tools that enable workers to access information from anywhere, at any time, from any device. Employees want simplicity and convenience but it doesn't stop at private enterprise. This is a societal shift. Governments, which traditionally have been known to be slower to adopt newer technology, are also offering support for local businesses to go mobile. Several state government websites have advice on how to create mobile apps and more. And as recently as last week the Victorian Minister for Technology Gordon Rich-Phillips unveiled his State government's ICT roadmap for the next two years, which details an increased use of the public cloud, as well as mobile communications, and improved access to online data-sets. Tech giants are investing significantly in solutions designed to simplify mobile deployment and enablement. The mobility trend is creating a wave of change in the industry and driving transformation in the enterprise. If you're not on that wave, the business risk continues to rise as your competitiveness drops. Aaron is the Vice President of HCM Strategy at Oracle Corporation where he is responsible for researching and identifying emerging trends in the practice of Human Resources and works to deliver industry-leading technology solutions. Other responsibilities include, ownership of Oracle's innovative HCM solutions across JAPAC and enabling organisations to transform and modernise their workforce tools. Follow him on Twitter @aaronjgreen

    Read the article

  • GLSL: Strange light reflections

    - by Tom
    According to this tutorial I'm trying to make a normal mapping using GLSL, but something is wrong and I can't find the solution. The output render is in this image: Image1 in this image is a plane with two triangles and each of it is different illuminated (that is bad). The plane has 6 vertices. In the upper left side of this plane are 2 identical vertices (same in the lower right). Here are some vectors same for each vertice: normal vector = 0, 1, 0 (red lines on image) tangent vector = 0, 0,-1 (green lines on image) bitangent vector = -1, 0, 0 (blue lines on image) here I have one question: The two identical vertices does need to have the same tangent and bitangent? I have tried to make other values to the tangents but the effect was still similar. Here are my shaders Vertex shader: #version 130 // Input vertex data, different for all executions of this shader. in vec3 vertexPosition_modelspace; in vec2 vertexUV; in vec3 vertexNormal_modelspace; in vec3 vertexTangent_modelspace; in vec3 vertexBitangent_modelspace; // Output data ; will be interpolated for each fragment. out vec2 UV; out vec3 Position_worldspace; out vec3 EyeDirection_cameraspace; out vec3 LightDirection_cameraspace; out vec3 LightDirection_tangentspace; out vec3 EyeDirection_tangentspace; // Values that stay constant for the whole mesh. uniform mat4 MVP; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Output position of the vertex, in clip space : MVP * position gl_Position = MVP * vec4(vertexPosition_modelspace,1); // Position of the vertex, in worldspace : M * position Position_worldspace = (M * vec4(vertexPosition_modelspace,1)).xyz; // Vector that goes from the vertex to the camera, in camera space. // In camera space, the camera is at the origin (0,0,0). vec3 vertexPosition_cameraspace = ( V * M * vec4(vertexPosition_modelspace,1)).xyz; EyeDirection_cameraspace = vec3(0,0,0) - vertexPosition_cameraspace; // Vector that goes from the vertex to the light, in camera space. M is ommited because it's identity. vec3 LightPosition_cameraspace = ( V * vec4(LightPosition_worldspace,1)).xyz; LightDirection_cameraspace = LightPosition_cameraspace + EyeDirection_cameraspace; // UV of the vertex. No special space for this one. UV = vertexUV; // model to camera = ModelView vec3 vertexTangent_cameraspace = MV3x3 * vertexTangent_modelspace; vec3 vertexBitangent_cameraspace = MV3x3 * vertexBitangent_modelspace; vec3 vertexNormal_cameraspace = MV3x3 * vertexNormal_modelspace; mat3 TBN = transpose(mat3( vertexTangent_cameraspace, vertexBitangent_cameraspace, vertexNormal_cameraspace )); // You can use dot products instead of building this matrix and transposing it. See References for details. LightDirection_tangentspace = TBN * LightDirection_cameraspace; EyeDirection_tangentspace = TBN * EyeDirection_cameraspace; } Fragment shader: #version 130 // Interpolated values from the vertex shaders in vec2 UV; in vec3 Position_worldspace; in vec3 EyeDirection_cameraspace; in vec3 LightDirection_cameraspace; in vec3 LightDirection_tangentspace; in vec3 EyeDirection_tangentspace; // Ouput data out vec3 color; // Values that stay constant for the whole mesh. uniform sampler2D DiffuseTextureSampler; uniform sampler2D NormalTextureSampler; uniform sampler2D SpecularTextureSampler; uniform mat4 V; uniform mat4 M; uniform mat3 MV3x3; uniform vec3 LightPosition_worldspace; void main(){ // Light emission properties // You probably want to put them as uniforms vec3 LightColor = vec3(1,1,1); float LightPower = 40.0; // Material properties vec3 MaterialDiffuseColor = texture2D( DiffuseTextureSampler, vec2(UV.x,-UV.y) ).rgb; vec3 MaterialAmbientColor = vec3(0.1,0.1,0.1) * MaterialDiffuseColor; //vec3 MaterialSpecularColor = texture2D( SpecularTextureSampler, UV ).rgb * 0.3; vec3 MaterialSpecularColor = vec3(0.5,0.5,0.5); // Local normal, in tangent space. V tex coordinate is inverted because normal map is in TGA (not in DDS) for better quality vec3 TextureNormal_tangentspace = normalize(texture2D( NormalTextureSampler, vec2(UV.x,-UV.y) ).rgb*2.0 - 1.0); // Distance to the light float distance = length( LightPosition_worldspace - Position_worldspace ); // Normal of the computed fragment, in camera space vec3 n = TextureNormal_tangentspace; // Direction of the light (from the fragment to the light) vec3 l = normalize(LightDirection_tangentspace); // Cosine of the angle between the normal and the light direction, // clamped above 0 // - light is at the vertical of the triangle -> 1 // - light is perpendicular to the triangle -> 0 // - light is behind the triangle -> 0 float cosTheta = clamp( dot( n,l ), 0,1 ); // Eye vector (towards the camera) vec3 E = normalize(EyeDirection_tangentspace); // Direction in which the triangle reflects the light vec3 R = reflect(-l,n); // Cosine of the angle between the Eye vector and the Reflect vector, // clamped to 0 // - Looking into the reflection -> 1 // - Looking elsewhere -> < 1 float cosAlpha = clamp( dot( E,R ), 0,1 ); color = // Ambient : simulates indirect lighting MaterialAmbientColor + // Diffuse : "color" of the object MaterialDiffuseColor * LightColor * LightPower * cosTheta / (distance*distance) + // Specular : reflective highlight, like a mirror MaterialSpecularColor * LightColor * LightPower * pow(cosAlpha,5) / (distance*distance); //color.xyz = E; //color.xyz = LightDirection_tangentspace; //color.xyz = EyeDirection_tangentspace; } I have replaced the original color value by EyeDirection_tangentspace vector and then I got other strange effect but I can not link the image (not eunogh reputation) Is it possible that with this shaders is something wrong, or maybe in other place in my code e.g with my matrices? SOLVED Solved... 3 days needed for changing one letter from this: glBindBuffer(GL_ARRAY_BUFFER, vbo); glVertexAttribPointer ( 4, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? sizeof(VboVertex), // stride (void*)(12*sizeof(float)) // array buffer offset ); to this: glBindBuffer(GL_ARRAY_BUFFER, vbo); glVertexAttribPointer ( 4, // attribute 3, // size GL_FLOAT, // type GL_FALSE, // normalized? sizeof(VboVertex), // stride (void*)(11*sizeof(float)) // array buffer offset ); see difference? :)

    Read the article

  • Using pfSense, OpenVPN Connects but Still Can't See the Network

    - by nicorellius
    I am having an OpenVPN issue. I have a pfSense box at home configured to allow traffic through a VPN tunnel. The client computer is Windows XP Home, behind a standard Comcast connection and a Netgear wireless router. I use OpenVPN to access my work network (from where I am trying to get out of in this post) from home (with an XP Pro machine behind pfSense), and this works fine. The client config is similar but has the changes specific to my setup... Here is my XP Home config: client dev tun proto tcp remote pfsense.*.org 1194 (starred out by me) resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server comp-lzo verb 3 When I launch the OpenVPN GUI, the Tunnel TAP network connection turns red, and I can right-click that to connect to the server. Everything seems to work fine until I browse for the actual network. The Tunnel TAP connection turns green and it says connected to 10.1.1.6 (I have tried different IP pools here too with no luck). I can see the internal network fine, but my home network behind pfSense is not there. I have tried browsing there by using Tools Map Network Drive, using the browser, with no success. When I open the command line on the client and use the ipconfig -all command, I get the following: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TAP-Win32 Adapter V9 Physical Address. . . . . . . . . : *** (starred out by me) Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 10.1.1.6 Subnet Mask . . . . . . . . . . . : 255.255.255.252 Default Gateway . . . . . . . . . : DHCP Server . . . . . . . . . . . : 10.1.1.5 Lease Obtained. . . . . . . . . . : Monday, March 15, 2010 1:18:37 PM Lease Expires . . . . . . . . . . : Tuesday, March 15, 2011 1:18:37 PM I noticed that the default gateway is not present. Could this be my problem? I am still relatively new to firewalls, VPN, and network configuration so I'm sure I am messing up something simple. Oh yah, I should note that I have firewall rules configured for pfSense to allow traffic through the WAN and the LAN. At first there was just the WAN firewall rule, because that is what I got from the literature I was reading. I then created a LAN rule as well, but I'm not sure if this was correct. Neither way works, though. Screen shots below: Any help is much appreciated.

    Read the article

  • What does it mean when ARP shows <incomplete> on eth1

    - by Geoff Dalgas
    We have been using HAProxy along with heartbeat from the Linux-HA project. We are using two linux instances to provide a failover. Each server has with their own public IP and a single IP which is shared between the two using a virtual interface (eth1:1) at IP: 69.59.196.211 The virtual interface (eth1:1) IP 69.59.196.211 is configured as the gateway for the windows servers behind them and we use ip_forwarding to route traffic. We are experiencing an occasional network outage on one of our windows servers behind our linux gateways. HAProxy will detect the server is offline which we can verify by remoting to the failed server and attempting to ping the gateway: Pinging 69.59.196.211 with 32 bytes of data: Reply from 69.59.196.220: Destination host unreachable. Running arp -a on this failed server shows that there is no entry for the gateway address (69.59.196.211): Interface: 69.59.196.220 --- 0xa Internet Address Physical Address Type 69.59.196.161 00-26-88-63-c7-80 dynamic 69.59.196.210 00-15-5d-0a-3e-0e dynamic 69.59.196.212 00-21-5e-4d-45-c9 dynamic 69.59.196.213 00-15-5d-00-b2-0d dynamic 69.59.196.215 00-21-5e-4d-61-1a dynamic 69.59.196.217 00-21-5e-4d-2c-e8 dynamic 69.59.196.219 00-21-5e-4d-38-e5 dynamic 69.59.196.221 00-15-5d-00-b2-0d dynamic 69.59.196.222 00-15-5d-0a-3e-09 dynamic 69.59.196.223 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 225.0.0.1 01-00-5e-00-00-01 static On our linux gateway instances arp -a shows: peak-colo-196-220.peak.org (69.59.196.220) at <incomplete> on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-222.peak.org (69.59.196.222) at 00:15:5d:0a:3e:09 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 Why would arp occasionally set the entry for this failed server as <incomplete>? Should we be defining our arp entries statically? I've always left arp alone since it works 99% of the time, but in this one instance it appears to be failing. Are there any additional troubleshooting steps we can take help resolve this issue? THINGS WE HAVE TRIED I added a static arp entry for testing on one of the linux gateways which still didn't help. root@haproxy2:~# arp -a peak-colo-196-215.peak.org (69.59.196.215) at 00:21:5e:4d:61:1a [ether] on eth1 peak-colo-196-221.peak.org (69.59.196.221) at 00:15:5d:00:b2:0d [ether] on eth1 stackoverflow.com (69.59.196.212) at 00:21:5e:4d:45:c9 [ether] on eth1 peak-colo-196-219.peak.org (69.59.196.219) at 00:21:5e:4d:38:e5 [ether] on eth1 peak-colo-196-209.peak.org (69.59.196.209) at 00:26:88:63:c7:80 [ether] on eth1 peak-colo-196-217.peak.org (69.59.196.217) at 00:21:5e:4d:2c:e8 [ether] on eth1 peak-colo-196-220.peak.org (69.59.196.220) at 00:21:5e:4d:30:8d [ether] PERM on eth1 root@haproxy2:~# arp -i eth1 -s 69.59.196.220 00:21:5e:4d:30:8d root@haproxy2:~# ping 69.59.196.220 PING 69.59.196.220 (69.59.196.220) 56(84) bytes of data. --- 69.59.196.220 ping statistics --- 7 packets transmitted, 0 received, 100% packet loss, time 6006ms Rebooting the windows web server solves this issue temporarily with no other changes to the network but our experience shows this issue will come back. Swapping network cards and switches I noticed the link light on the port of the switch for the failed windows server was running at 100Mb instead of 1Gb on the failed interface. I moved the cable to several other open ports and the link indicated 100Mb for each port that I tried. I also swapped the cable with the same result. I tried changing the properties of the network card in windows and the server locked up and required a hard reset after clicking apply. This windows server has two physical network interfaces so I have swapped the cables and network settings on the two interfaces to see if the problem follows the interface. If the public interface goes down again we will know that it is not an issue with the network card. (We also tried another switch we have on hand, no change) Changing network hardware driver versions We've had the same problem with the latest Broadcom driver, as well as the built-in driver that ships in Windows Server 2008 R2. Replacing network cables As a last ditch effort we remembered another change that occurred was the replacement of all of the patch cords between our servers / switch. We had purchased two sets, one green of lengths 1ft - 3ft for the private interfaces and another set of red cables for the public interfaces. We swapped out all of the public interface patch cables with a different brand and ran our servers without issue for a full week ... aaaaaand then the problem recurred. Disable checksum offload, remove TProxy We also tried disabling TCP/IP checksum offload in the driver, no change. We're now pulling out TProxy and moving to a more traditional x-forwarded-for network arrangement without any fancy IP address rewriting. We'll see if that helps.

    Read the article

  • 401 Using Multiple Authentication methods IE 10 only

    - by jon3laze
    I am not sure if this is more of a coding issue or server setup issue so I've posted it on stackoverflow and here... On our production site we've run into an issue that is specific to Internet Explorer 10. I am using jQuery doing an ajax POST to a web service on the same domain and in IE10 I am getting a 401 response, IE9 works perfectly fine. I should mention that we have mirrored code in another area of our site and it works perfectly fine in IE10. The only difference between the two areas is that one is under a subdomain and the other is at the root level. www.my1stdomain.com vs. portal.my2nddomain.com The directory structure on the server for these are: \my1stdomain\webservice\name\service.aspx \portal\webservice\name\service.aspx Inside of the \portal\ and \my1stdomain\ folders I have a page that does an ajax call, both pages are identical. $.ajax({ type: 'POST', url: '/webservice/name/service.aspx/function', cache: false, contentType: 'application/json; charset=utf-8', dataType: 'json', data: '{ "json": "data" }', success: function() { }, error: function() { } }); I've verified permissions are the same on both folders on the server side. I've applied a workaround fix of placing the <meta http-equiv="X-UA-Compatible" value="IE=9"> to force compatibility view (putting IE into compatibility mode fixes the issue). This seems to be working in IE10 on Windows 7, however IE 10 on Windows 8 still sees the same issue. These pages are classic asp with the headers that are being included, also there are no other meta tags being used. The doctype is being specified as <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//" "http://www.w3.org/TR/html4/loose.dtd"> on the portal page and <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> on the main domain. UPDATE1 I used Microsoft Network Monitor 3.4 on the server to capture the request. I used the following filter to capture the 401: Property.HttpStatusCode.StringToNumber == 401 This was the response - Http: Response, HTTP/1.1, Status: Unauthorized, URL: /webservice/name/service.aspx/function Using Multiple Authetication Methods, see frame details ProtocolVersion: HTTP/1.1 StatusCode: 401, Unauthorized Reason: Unauthorized - ContentType: application/json; charset=utf-8 - MediaType: application/json; charset=utf-8 MainType: application/json charset: utf-8 Server: Microsoft-IIS/7.0 jsonerror: true - WWWAuthenticate: Negotiate - Authenticate: Negotiate WhiteSpace: AuthenticateData: Negotiate - WWWAuthenticate: NTLM - Authenticate: NTLM WhiteSpace: AuthenticateData: NTLM XPoweredBy: ASP.NET Date: Mon, 04 Mar 2013 21:13:39 GMT ContentLength: 105 HeaderEnd: CRLF - payload: HttpContentType = application/json; charset=utf-8 HTTPPayloadLine: {"Message":"Authentication failed.","StackTrace":null,"ExceptionType":"System.InvalidOperationException"} The thing here that really stands out is Unauthorized, URL: /webservice/name/service.aspx/function Using Multiple Authentication Methods With this I'm still confused as to why this only happens in IE10 if it's a permission/authentication issue. What was added to 10, or where should I be looking for the root cause of this? UPDATE2 Here are the headers from the client machine from fiddler (server information removed): Main SESSION STATE: Done. Request Entity Size: 64 bytes. Response Entity Size: 9 bytes. == FLAGS ================== BitFlags: [ServerPipeReused] 0x10 X-EGRESSPORT: 44537 X-RESPONSEBODYTRANSFERLENGTH: 9 X-CLIENTPORT: 44770 UI-COLOR: Green X-CLIENTIP: 127.0.0.1 UI-OLDCOLOR: WindowText UI-BOLD: user-marked X-SERVERSOCKET: REUSE ServerPipe#46 X-HOSTIP: ***.***.***.*** X-PROCESSINFO: iexplore:2644 == TIMING INFO ============ ClientConnected: 14:43:08.488 ClientBeginRequest: 14:43:08.488 GotRequestHeaders: 14:43:08.488 ClientDoneRequest: 14:43:08.488 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 0ms HTTPS Handshake: 0ms ServerConnected: 14:40:28.943 FiddlerBeginRequest: 14:43:08.488 ServerGotRequest: 14:43:08.488 ServerBeginResponse: 14:43:08.592 GotResponseHeaders: 14:43:08.592 ServerDoneResponse: 14:43:08.592 ClientBeginResponse: 14:43:08.592 ClientDoneResponse: 14:43:08.592 Overall Elapsed: 0:00:00.104 The response was buffered before delivery to the client. == WININET CACHE INFO ============ This URL is not present in the WinINET cache. [Code: 2] Portal SESSION STATE: Done. Request Entity Size: 64 bytes. Response Entity Size: 105 bytes. == FLAGS ================== BitFlags: [ClientPipeReused, ServerPipeReused] 0x18 X-EGRESSPORT: 44444 X-RESPONSEBODYTRANSFERLENGTH: 105 X-CLIENTPORT: 44439 X-CLIENTIP: 127.0.0.1 X-SERVERSOCKET: REUSE ServerPipe#7 X-HOSTIP: ***.***.***.*** X-PROCESSINFO: iexplore:7132 == TIMING INFO ============ ClientConnected: 14:37:59.651 ClientBeginRequest: 14:38:01.397 GotRequestHeaders: 14:38:01.397 ClientDoneRequest: 14:38:01.397 Determine Gateway: 0ms DNS Lookup: 0ms TCP/IP Connect: 0ms HTTPS Handshake: 0ms ServerConnected: 14:37:57.880 FiddlerBeginRequest: 14:38:01.397 ServerGotRequest: 14:38:01.397 ServerBeginResponse: 14:38:01.464 GotResponseHeaders: 14:38:01.464 ServerDoneResponse: 14:38:01.464 ClientBeginResponse: 14:38:01.464 ClientDoneResponse: 14:38:01.464 Overall Elapsed: 0:00:00.067 The response was buffered before delivery to the client. == WININET CACHE INFO ============ This URL is not present in the WinINET cache. [Code: 2]

    Read the article

  • Problem installing Ubuntu 10.04 64 bit side by side with Vista by using a bootable USB drive. What n

    - by Adam Siddhi
    What happened I decided to install Ubuntu 10.04 64 bit side by side with Vista Home Premium (I guess on another partition) with a USB stick. I found instructions on how to do this here: https://help.ubuntu.com/community/Installation/FromUSBStick To create the bootable USB drive I had to download a program called Unetbootin. That process was simple enough. All I had to do was just choose the disk image option, select the ubuntu-10.04-desktop-amd64.iso image, make sure it recognizes my USB drive and then press OK. It takes only like a few minutes to create a working bootable USB drive. Then I have to restart my computer, enter the BIOS, select my USB drive as the first boot drive, save options and continue with booting up. After this Ubuntu actually loads up. I think this is known as the Live version of Ubuntu so you can try it out before fully installing it. Any ways, on the Ubuntu 10.04 desktop I saw an installer. I click it and begin the installation process. Just so you know, I tried installing it 2 times. I will explain what happened each time: The first time I tried installing Ubuntu 10.04 I got stuck at step 4 of 7. I remember selecting the last option in the window which was Specify Partitions Manually (Advanced) I made my partition for Ubuntu like 52 gigs. I clicked forward and a little pop up window appeared saying Please Wait. So the installation process stalled on this window so I closed out of it and quit the installation process. So at this point I was worried because I had already selected the partition size and assumed it started making it. Since it stalled I had to quit out though. Anyways, once again I reached step 4 of 7 a decided to select the first option which is Install them side by side choosing between them each startup. I figured this was the safe way to go. I did that and the pop up window saying Please Wait popped up again but lasted only like 10 seconds. Then I got to I guess step 6 where it asks you to enter your desired name and password. Did that and clicked forward. The Ubuntu 10.04 installation load screen appeared and the loading bar at the bottom started filling up. So I got to 83% and stalled during the Importing other profile information (I think it was called this. I had the option to do this during I think step 6) process. So at this point I decided to get stop the installation process. I was getting very nervous. I tried to restart the computer but all that happened was that Ubuntu restarted. I finally got the computer to restart. I was pretty sure I had screwed something up big time by this point. As my computer was restarting I entered BIOS again and switched back to it booting from my main hard drive containing Vista. Saved it and continued the boot process. My worst fears were confirmed as Vista would not boot up. I mean I saw the little Microsoft Windows choppy animated green loading bar at the bottom of the screen and then boom! It decided to restart. When it restarted I had the option to run a memory test check to see if there was anything that needed to be repaired. That took like 20 minutes and at the end I saw that I did indeed have to repair something. I had to go through 2 repair processes. After each I had to restart the computer. The 2nd time it went through the repair process it said that it could not fully repair the damage. I was scared and restarted but Vista did load up. I got to my desktop and saw a message saying something like Repairs have been made, Please restart for changes to take effect I noticed that some Notification icons were missing and I could not hear volume in a video. Things were a bit funky. So I did restart and here I am. Now what?! So since I got back into Vista and thankfully have a working Internet connection I am trying to find answers to my problem (that is why I am writing this post). I am scared that I have partioned my hard drive 2 times after researching Installing Ubuntu 10.04 and seeing this post http://techie-buzz.com/foss/ubuntu-10-04-lts-installation-guide.html The author shows screen shots of installing Ubuntu 10.04. He shows the image of step 4 of 7 with a caption at the bottom. I will recreate it below: Select a partitioning option. Unless you want to format all the hard drive and install Ubuntu afresh, select the last option and proceed. Questions If I have indeed partitioned my HD 2 times (which I am sure it is), how do I get to a point where I can see all my bad, unfinished Ubuntu partitions and get rid of them? How do I clean this big mess up? & How can I ensure that this mess will not happen next time I try installing Ubuntu 10.04? Thank you Adam

    Read the article

  • ESXi v5.5 is having random crashes

    - by Darkmage
    HW: Type: HP Proliant ML350 G5 RAM 22GB CPU 1 x Intel Xenon E5405 2.00GHz OP: ESXi 5.5 just updated from 5.1 to try and fix the crashes occurring on ESXi 5.1 on same hardware. I'm trying to find the error on why one of our servers is crashing, it has had two lock ups in 24 hours now. The internal error light on the front is blinking red, on the inside only "#5 and #6 page 76 manual" the "Processor 2" light "amber" and the "Power" light "green" is shining. in the logs the only errors i can see in the relevant time frame is in log under. Is this the reason? or is there anything else i can do to try and log/locate the error. from zcat syslog.6.gz | less 2014-05-26T11:55:47Z sfcbd[35064]: Error opening socket pair for getProviderContext: Too many open files 2014-05-26T11:55:47Z sfcbd[35064]: Failed to set recv timeout (30) for socket -1. Errno = 9 2014-05-26T11:55:47Z sfcbd[35064]: Failed to set timeout for local socket (e.g. provider) 2014-05-26T11:55:47Z sfcbd[35064]: spGetMsg receiving from -1 35064-9 Bad file descriptor 2014-05-26T11:55:47Z sfcbd[35064]: rcvMsg receiving from -1 35064-9 Bad file descriptor 2014-05-26T11:55:47Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:55:47Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:55:47Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:55:47Z sfcbd[35064]: Error opening socket pair for getProviderContext: Too many open files 2014-05-26T11:55:47Z sfcbd[35064]: Failed to set recv timeout (30) for socket -1. Errno = 9 2014-05-26T11:55:47Z sfcbd[35064]: Failed to set timeout for local socket (e.g. provider) 2014-05-26T11:55:47Z sfcbd[35064]: spGetMsg receiving from -1 35064-9 Bad file descriptor 2014-05-26T11:55:47Z sfcbd[35064]: rcvMsg receiving from -1 35064-9 Bad file descriptor 2014-05-26T11:55:47Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:55:47Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:55:47Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:55:53Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:55:57Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:01Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:04Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:15Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:17Z sfcbd[35064]: Error opening socket pair for getProviderContext: Too many open files 2014-05-26T11:56:17Z sfcbd[35064]: Failed to set recv timeout (30) for socket -1. Errno = 9 2014-05-26T11:56:17Z sfcbd[35064]: Failed to set timeout for local socket (e.g. provider) 2014-05-26T11:56:17Z sfcbd[35064]: spGetMsg receiving from -1 35064-9 Bad file descriptor 2014-05-26T11:56:17Z sfcbd[35064]: rcvMsg receiving from -1 35064-9 Bad file descriptor 2014-05-26T11:56:17Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:17Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:17Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:17Z sfcbd[35064]: Error opening socket pair for getProviderContext: Too many open files 2014-05-26T11:56:17Z sfcbd[35064]: Failed to set recv timeout (30) for socket -1. Errno = 9 2014-05-26T11:56:17Z sfcbd[35064]: Failed to set timeout for local socket (e.g. provider) 2014-05-26T11:56:17Z sfcbd[35064]: spGetMsg receiving from -1 35064-9 Bad file descriptor 2014-05-26T11:56:17Z sfcbd[35064]: rcvMsg receiving from -1 35064-9 Bad file descriptor 2014-05-26T11:56:17Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:17Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:17Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:23Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:27Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:31Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:34Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:34Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:34Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:34Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:34Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:44Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:44Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:44Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:44Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:46Z sfcb-ProviderManager[34828]: SendMsg sending to 1 34828-9 Bad file descriptor 2014-05-26T11:56:48Z sfcbd[35064]: Error opening socket pair for getProviderContext: Too many open files -- manual

    Read the article

  • Android: canvas.drawBitmap with Orientation(MagnetField)Sensor

    - by user368374
    hallo, i am developing Android app with orientation sensor. now i got problem. What i want to do is, change scale and position of bitmap which read from sd card. The scale and position depend on value from orientation sensor. i use canvas.drawBitmap(), then it cause problem. the app is just shut down. other drawXXX()methods have no problem..any suggestion? public class AnMagImgtestActivity extends Activity implements SensorEventListener { private SensorManager sensorManager; private MySurfaceView view; @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); sensorManager = (SensorManager)getSystemService(SENSOR_SERVICE); view = new MySurfaceView(this); ///make it fullscreen getWindow().addFlags(WindowManager.LayoutParams.FLAG_FULLSCREEN); requestWindowFeature(Window.FEATURE_NO_TITLE); ///give screen a hiropon getWindow().addFlags(WindowManager.LayoutParams.FLAG_KEEP_SCREEN_ON); setContentView(view); } @Override protected void onResume() { super.onResume(); List sensors = sensorManager.getSensorList(Sensor.TYPE_ORIENTATION); if (sensors.size() 0) { Sensor sensor = sensors.get(0); sensorManager.registerListener(this, sensor, SensorManager.SENSOR_DELAY_GAME); } } @Override protected void onPause() { super.onPause(); sensorManager.unregisterListener(this); } @Override public void onAccuracyChanged(Sensor sensor, int accuracy) { } @Override public void onSensorChanged(SensorEvent event) { view.onValueChanged(event.values); } class MySurfaceView extends SurfaceView implements SurfaceHolder.Callback{ public MySurfaceView(Context context) { super(context); getHolder().addCallback(this); } @Override public void surfaceChanged(SurfaceHolder holder, int format, int width, int height) { onValueChanged(new float[3]); } @Override public void surfaceCreated(SurfaceHolder holder) { } @Override public void surfaceDestroyed(SurfaceHolder holder) { } void onValueChanged(float[] values) { Canvas canvas = getHolder().lockCanvas(); //String imgfn = "/sdcard/seekcamera"+"/"+regcode+"/to"+"/"+tempnum+".jpg"; String imgfn = "/sdcard/seekcamera"+"/de"+"/to"+"1.jpg"; //String imgfn = "/sdcard/seekcamera"+"/00"+"/00"+"/"+"42.jpg"; File mf = new File(imgfn); Bitmap bitmap0 = BitmapFactory.decodeFile(mf.getPath()); if (canvas != null) { Paint paint = new Paint(); paint.setAntiAlias(true); paint.setColor(Color.GREEN); paint.setTextSize(12); canvas.drawColor(Color.BLACK); paint.setAlpha(200); for (int i = 0; i < values.length; i++) { canvas.drawText("values[" + i + "]: " + values[i], 0, paint.getTextSize() * (i + 1), paint); } paint.setColor(Color.WHITE); paint.setTextSize(100+values[2]); paint.setAlpha( (int) (255-values[2])); canvas.drawText("Germany", values[0]*1+20, paint.getTextSize() * 1+values[2]-80, paint); ///here is the problem.. canvas.drawBitmap(bitmap0, values[0],values[1], paint); getHolder().unlockCanvasAndPost(canvas); } } } }

    Read the article

  • Using ASP.NET MVC 2 with Ninject 2 from scratch

    - by Rune Jacobsen
    I just did File - New Project last night on a new project. Ah, the smell of green fields. I am using the just released ASP.NET MVC 2 (i.e. no preview or release candidate, the real thing), and thought I'd get off to a good start using Ninject 2 (also released version) with the MVC extensions. I downloaded the MVC extensions project, opened it in VS2008Sp1, built it in release mode, and then went into the mvc2\build\release folder and copied Ninject.dll and Ninject.Web.Mvc.dll from there to the Libraries folder on my project (so that I can lug them around in source control and always have the right version everywhere). I didn't include the corresponding .xml files - should I? Do they just provide intellisense, or some other function? Not a big deal I believe. Anyhoo, I followed the most up-to-date advice I could find; I referenced the DLLs in my MVC2 project, then went to work on Global.asax.cs. First I made it inherit from NinjectHttpApplication. I removed the Application_Start() method, and overrode OnApplicationStarted() instead. Here is that method: protected override void OnApplicationStarted() { base.OnApplicationStarted(); AreaRegistration.RegisterAllAreas(); RegisterRoutes(RouteTable.Routes); // RegisterAllControllersIn(Assembly.GetExecutingAssembly()); } And I also followed the advice of VS and implemented the CreateKernel method: protected override Ninject.IKernel CreateKernel() { // RegisterAllControllersIn(Assembly.GetExecutingAssembly()); return new StandardKernel(); } That is all. No other modifications to the project. You'll notice that the RegisterAllControllersIn() method is commented out in two places above. I've figured I can run it in three different combinations, all with their funky side effects; Running it like above. I am then presented with the standard "Welcome to ASP.NET MVC" page in all its' glory. However, after this page is displayed correctly in the browser, VS shows me an exception that was thrown. It throws in NinjectControllerFactory.GetControllerInstance(), which was called with a NULL value in the controllerType parameter. Notice that this happens after the /Home page is rendered - I have no idea why it is called again, and by using breakpoints I've already determined that GetControllerInstance() has been successfully called for the HomeController. Why this new call with controllerType as null? I really have no idea. Pressing F5 at this time takes me back to the browser, no complaints there. Uncommenting the RegisterAllControllersIn() method in CreateKernel() This is where stuff is really starting to get funky. Now I get a 404 error. Some times I have also gotten an ArgumentNullException on the RegisterAllControllersIn() line, but that is pretty rare, and I have not been able to reproduce it. Uncommenting the RegisterAllControllers() method in OnApplicationStarted() (And putting the comment back on the one in CreateKernel()) Results in behavior that seems exactly like that in point 1. So to keep from going on forever - is there an exact step-by-step guide on how to set up an MVC 2 project with Ninject 2 (both non-beta release versions) to get the controllers provided by Ninject? Of course I will then start providing some actual stuff for injection (like ISession objects and repositories, loggers etc), but I thought I'd get this working first. Any help will be highly appreciated! (Also posted to the Ninject Google Group)

    Read the article

< Previous Page | 90 91 92 93 94 95 96 97 98 99 100 101  | Next Page >