Search Results

Search found 2311 results on 93 pages for 'music'.

Page 88/93 | < Previous Page | 84 85 86 87 88 89 90 91 92 93  | Next Page >

  • Why does my computer run slowly and freeze sometimes?

    - by Brae
    EDIT I disabled sound in the BIOS, rebooted and it hung. I removed the (previously) faulty HDD, rebooted and it hung. I have managed to get my Realtek audio manager open again after its mysterious disappearance. Subsequently my microphone is now working again, to fix it I had to uninstall audio drivers, disable audio in BIOS, install audio drivers, enable audio in BIOS. Access via network (with faulty HDD in) seems to not be triggering hangs at the moment. I think with the sound problem fixed it might play a little nicer, but I think its still going to hang. If it does, then I'm fairly sure its been narrowed down to the mobo. EDIT Pretty convinced my motherboard is the culprit, because nothing else seems to have any obvious problems (bar the hard drive, which the PC still hangs without it being plugged in) So thank you all for helping, once I get more rep ill up a few of the answers. My PC is doing some weird things... Sometimes when I open up a program, lets say Adobe Photoshop, it will load everything normally, nice and quick no problems and I can use it fine. Other times its a little odd, and it loads the program as if it's only using half of the CPU. It's pretty obvious when it does it, normally the loading screen skims past, but when it does this weird load you see it slowly tick though each thing, and the program itself becomes incredibly slow. Even Google Chrome does it sometimes. Yet when I exit and reopen the program without doing anything else, it typically opens fine without lagging. I think this problem is probably a symptom of something bigger, because of other problems I'm having. Random hangs; no matter what I have open or what I'm doing. My PC will sort of freeze up for a few seconds. If music is playing it will either loop the last second or two, or it will buzz. This only lasts for a few seconds then it returns to normal without having to restart. During this time all programs lock up and freeze, and the mouse and keyboard are useless. I am also having a weird issue with my audio jacks, without touching my PC at all, sometimes I will see a popup saying that I have unplugged something or plugged something in, neither of which has actually happened. Pretty sure this is cause by the motherboard. I recently had a 'Pink Screen of Death' (yes pink) which pointed to my audio drivers. The lockups seem to happen with some consistency when someone is accessing my shared files via my home LAN. Which leads me to believe either one of my hard drives is acting up or more likely the controller. One of my drives had a bit of a crash before, I used Spinrite and managed to recover my stuff and now the drive appears to be working okay. This is possibly adding to the problems. My best guess is something has gone wrong with my motherboard, possibly a power issue or a chip has died, I really don't know. So what I would like to know is: Have I have missed some obvious diagnostic to help figure out what it is, or should I just bite the bullet and assume its my motherboard acting up and buy a new system? dxdiag[64-bit] - http://pastebin.com/G30kb2TL PSOD (minidump) - http://pastebin.com/aZsv0H56 HWiNFO64 (system info / specs) - http://pastebin.com/X6h3K8g6

    Read the article

  • After each command tmux prints: ps1_update: command not found

    - by B.I.
    On Linux Ubuntu 11.04, after each command (cd, ls, vim...) successful or not, tmux prints out as a last line ps1_update: command not found. Is there any config option I am missing? Thank you very much! tmux.conf # http://lukaszwrobel.pl/blog/tmux-tutorial-split-terminal-windows-easily # just remember that after every modification, tmux must be refreshed # to take new settings into account. # This can be achieved either by restarting it or by typing in: # tmux source-file .tmux.conf # Here is a list of a few basic tmux commands: # Ctrl+b " - split pane horizontally. # Ctrl+b % - split pane vertically. # Ctrl+b arrow key - switch pane. # Hold Ctrl+b, don't release it and hold one of the arrow keys - resize pane. # !Ctrl+b c - (c)reate a new window. # !Ctrl+b n - move to the (n)ext window. # Ctrl+b p - move to the (p)revious window. # Shift+LMB - select text. # ALT+Arrows to move among panes. # rebind default prefix to C-a unbind C-b set -g prefix C-a # use ALT+Arrows to move around panes bind -n M-Left select-pane -L bind -n M-Right select-pane -R bind -n M-Up select-pane -U bind -n M-Down select-pane -D # activity monitoring setw -g monitor-activity on set -g visual-activity on # highlight current pane set-window-option -g window-status-current-bg yellow # enable pane switching with mouse set-option -g mouse-select-pane on # read bashrc source ~/.bashrc # Sane scrolling set -g terminal-overrides 'xterm*:smcup@:rmcup@' commandline print out ($(cat)user@tiki:~/.vim$ ls autoload bash_profile bashrc bundle README.md tmux.conf vimrc xmonad xmonad-ubuntu-conf xsessionrc ps1_update: command not found ($(cat)user@tiki:~/.vim$ ll total 56 drwxrwxr-x 2 user user 4096 Mar 17 10:20 autoload/ -rw-rw-r-- 1 user user 170 Mar 17 10:20 bash_profile -rw-rw-r-- 1 user user 4004 Apr 2 11:37 bashrc drwxrwxr-x 20 user user 4096 Aug 20 10:55 bundle/ -rw-rw-r-- 1 user user 11170 Aug 20 11:24 README.md -rw-rw-r-- 1 user user 1243 Mar 17 10:20 tmux.conf ps1_update: command not found ($(cat)user@tiki:~/.vim$ And the following is plain terminal output, without tmux running user@tiki:~$ ls backup_list.md Documents Dropbox examples.desktop hakers_and_painters.md~ hyundai Music projects ror Ubuntu One Videos windows.sh Desktop Downloads elif.txt hakers_and_painters.md help.txt maqola.txt Pictures Public tmp update_background.sh VirtualBox VMs user@tiki:~$ ll total 116 -rw-rw-r-- 1 user user 380 Aug 9 17:34 backup_list.md drwxr-xr-x 6 user user 4096 Jul 15 09:26 Desktop/ drwxr-xr-x 2 user user 4096 Jul 7 11:26 Documents/ drwxr-xr-x 11 user user 20480 Aug 20 13:53 Downloads/ -rwx------ 1 user user 729 May 7 14:45 update_background.sh* drwxr-xr-x 2 user user 4096 Dec 10 2013 Videos/ drwxrwxr-x 4 user user 4096 Sep 10 2013 VirtualBox VMs/ -rwxrwxr-x 1 user user 36 Jan 11 2014 windows.sh* user@tiki:~$ cd Desktop/ user@tiki:~/Desktop$ ll total 36 -rw-rw-r-- 1 user user 3388 Jul 14 17:10 daily--report.md -rw-rw-r-- 1 user user 71 Jan 28 2014 fernandez readme.md -rw-rw-r-- 1 user user 23 Jan 28 2014 fernandez readme.md~ drwx------ 4 user user 4096 Mar 23 14:02 my_docs/ drwx------ 2 user user 4096 Feb 3 2014 Origami/ drwx------ 7 user user 4096 Feb 1 2013 Plants_vs._Zombies_v1.2.0.1065/ -rwxr-xr-x 1 user user 301 Apr 15 11:28 Sky Fight.desktop* drwx------ 2 user user 4096 Feb 11 2014 webdesign/ -rwxrwxr-x 1 user user 26 Jan 11 2014 windows.sh~* user@tiki:~/Desktop$

    Read the article

  • .AVI Files randomly cease to open, other strange errors too

    - by Ben Franchuk
    I Recently (a couple weeks ago) downloaded the complete series of Seinfeld, all in varying file type. I Watched them in sequence according to season and to airing date, and all was well. All of the files played fine with my media player of choice ("BS Player"), and once I had finished, I went onto watch some other TV I had previously downloaded (The U.S. Series of "The Office"), and after then, some other film and then some music, over the following weeks (keep in mind all of these files are all on the same Hard Drive). Later then, More recently, I Went back to watching Seinfeld. The episodes played well as they did before- with the exclusion of a few in Season 7. I Have not tested all of the episodes in the season, but upon inspection, the majority of them are experiencing this problem; the problem being simply that they don't open! BS Player says that the files are either damaged or that the codecs to play the files are not on my computer-- however I am certain that the files DO have the codecs, and I am pretty sure that they are NOT DAMAGED either. I Have played the files with other players (such as VLC, Media Player Classic, and Windows Media Player), too, only to the same result; of them not opening. Seemingly the only way that I can differentiate between a damaged file and a non-damaged file are the way that the icon shows in Windows Explorer. For example, the below image is how explorer shows the information of a file that is non-damaged... ...and below is how a damaged file appears... The most disturbing and confusing part of this, though, is the last episode in the season- It opens, but not as a video- Instead, as a 1 Hour, 16 Minute, and 35 Second Audio file! The file plays a song for the first 4 or so minutes, and then is pretty much silent (except for some extremely quiet noise) until the last minute or so, when a random array of chopped up sounds and beeping noises play. I Do not recognise the song at the beginning of the file, but by the sounds of it, it is a song by the artist "Mr. Oizo," who's complete works I downloaded a couple weeks before now; and a bit before then I had finished downloading season 9 (not affected by these problems) of Seinfeld. I'd also like to note that the file I told of earlier (which played audio instead of video) reads as the same size as the other files in the season (around 175 MB) and also opens as a video clip. I Have NEVER experienced any of these problems in the past, and they seem to be only effecting the one season of my downloaded TV. The problems have not arisen with any of the other files on my Hard Drive, or any of the files downloaded around the time or after the time of which I downloaded season 7 of Seinfeld- or at least to my noticing. I Use the hard drive these files are located on almost every day, so could that be the cause of these problems? Is this a sign that my HDD is soon going to die? If it helps, the HDD is a Western Digital MyBook 1.5 TB 7500 RPM. It is connected to the computer via U.S.B. 2.0. EDIT! I noticed that this problem is now occurring with Season 9 of Seinfeld- and, presumably, other files on the drive I have yet to check. Please, If you have ANY IDEA AT ALL on what may be causing this or how to fix it, do tell me!

    Read the article

  • What NAS setup for syncing over the internet?

    - by Jamse
    I have family living a few hours away and have a lot of files that I would like to share - especially lots of folders of digital photos, but also documents etc. - partially so they can see them, partially so I can have access when I visit them and partially for backup / redundancy purposes. My current hard drives on my main machine are getting pretty full anyway, and I have a MythTV box where my music is currently stored, so I was thinking of getting a NAS anyway. And at the other end my family have a few computers, so they would probably benefit from a NAS too. My general idea (though I'm willing to shift on this if there are any bright ideas about other ways of achieving my objectives) is to get a matching pair of NASs and have them sync over the internet. (To cut down on bandwidth use I would get them in sync locally to start with.) Having read around as best I can it seems that syncing over the internet is generally only a feature on quite high end units. However, I have seen that QNAP seem to feature this on their TS-110 and TS-210 units, which might work (they call it "remote replication"). They seem pretty reasonably priced for what they are, but of course with buying 2 of them and then adding the drives (say 1TB or 2TB each) I'd be looking at about £400 total. So, I'm looking for recommendations really. I don't want to spend more than the QNAPs would cost me, but any other ideas would be most appreciated. I am comfortable with technology and tinkering around, but I don't have as much time for that as I would like, so I guess I would favour solutions that require less tinkering rather than more (even though that's less fun!). Any thoughts would be welcome, as would any comments from people who have used the QNAP boxes for this. Thanks in advance. Some specifications: Two-way syncing. Changes made at either end should be synced to the other. There shouldn't be one unit that is effectively a read-only mirror of the other. Not real time. The syncing doesn't need to be real time - if it updated, say, daily overnight that would be fine. Set and forget. I would prefer minimal user interaction once set up - it would be great if syncs were scheduled and automatic. OS independence. I am running Windows XP plus an Ubuntu-based MythTV box. At the other end there are Windows 7 and Windows XP machines, plus a networked TV set top box which I think can play files off the network. Machine independence. I would favour a system that is self-contained, i.e. not reliant on any particular PC being switched on. If the system had enough else going for it I could perhaps work around it at this end, where I only have one PC that's used as such, but it would be harder at the other where there are at least two PCs that might be accessing the files. Notifications. I guess things like getting an email notification if the syncing fell over for any reason would be useful, though it's not a deal breaker.

    Read the article

  • Choice of an OS for a home ZFS NAS

    - by OlafM
    I am preparing a home NAS with an old Athlon 64 X2 3800+, 4 GB ECC RAM, Asus M2V MX motherboard, and a single 3 TB WDC Green (another one as mirror may be installed in the future). It's the cheapest solution I found that includes ECC memory and the higher energy consumption is offset by the lower (zero) cost of acquisition. The system will be used for: music storage and stream to other desktop computers; storage of the scanned dia slides (3-4k slides, 180 MB TIFF each one plus reduced quality JPEG version); stream of these photos to a local iPad 2 (maybe Plex App? not yet sure); (one additional) remote backup via rsync/ssh or ZFS send/receive. It will be controlled via remote ssh, maybe VNC, no monitor attached. Absolute requirement is a reliable ZFS solution, plus the ability to easily install packets/software/virtual machines and to update remotely (I will be the admin and I don't live near the NAS). I have mainly three options: NAS4free/FreeNAS OpenIndiana Solaris Express 11 (yeah yeah I know the license requirements, I will write a perl script on it to count it as development machine). Problems: NAS4free/FreeNAS (I tested only NAS4free) required embedded installation for remote upgrading, but full install for easy addition of software packets. Since I need at least AirVideo Server (linux/win) and Plex App (win/linux) to stream the photos and some videos to iPad (they both require virtualbox), but I cannot be there to install updates, NAS4free/FreeNAS are excluded. http://www.nas4free.org/general_information.html explains the issue: embedded can be remotely updated, full cannot. Solaris has also another advantage: Crashplan client supports Solaris and I'm already using it for other backups. I would like to leave the option open, even if I will be doing backups probably through zfs send/receive. NexentaStor was left out because zfs send/receive are not included in the free version. The question is now Solaris 11 Express over OpenIndiana. To ease the management, I will be using http://www.napp-it.org Which one would you suggest and why? I found lots of informations and it's difficult for me to decide. I think (from the napp-it manual) that Solaris has some additional options for SMB shares, but are they really needed at home? I think I won't even use ACLs, since normal unix-style permissions are enough. OpenIndiana has maybe more frequent updates (Solaris offers only security updates between releases), but again, do I need them? I don't think so. Moreover, this is a NAS that has to work and nothing else, I cannot risk having problems that require me to access the server. Isn't OpenIndiana a bit more... cutting edge (in the Solaris world)? I'm just asking, no need to focus on this for the answer :-) I would limit myself to these two options (SE11.1/OI) also because I will be making a NAS for me in the future (where high performances with Mac shares are also required) and Solaris has kernel support for AFP. I will use this server to gather experience as well. After this long question, thanks in advance! If you need additional info, let me know and I will update this post. UPDATES Given the first answers, I will strongly suggest the person paying the hardware to insert a second HD. Better 2x2TB than 1x3TB (3 TB is oversized anyway). I was trying to keep the initial costs down to spread them over a longer period, but better having something good from the beginning.

    Read the article

  • Hosed Windows 7 permissons

    - by Anthony
    Here is the most interesting thing I've noticed since the problems started: If I go into a control panel/system module (in this case the Resource Monitor) that has a "Check Online" type option, Firefox (my default browser) opens right up without a problem. But if I just start Firefox from any shortcuts (start menu, desktop, etc), the Firefox process starts up (and the start menu icon starts glowing) only to end without notice a few seconds later. Possibly related: If I start up in Safe-Mode (w/o Networking, but haven't tried with yet), I can start up FF or Chrome just fine, but if I attempt to open Chrome normally, I get a permissions error. Opera and Safari seem to be okay (mostly). Safari crashes when I try to download any files. All of the above leads me to believe that some (but clearly not all) core files have messed up permissions. Or rather, that I no longer have permission. System still does, based on Firefox opening without fail when the system initiates it. I've run MS Forefront once in normal mode, Malwarebytes twice in normal mode and once in safe-mode. One trojan found and deleted, but the problem persists. Two other things worth mentioning: I accidentally duplicated my library... I thought I'd try to add the "Internet" folder to my start menu, next to music and downloads. The first advanced thing I tried was "create new library". I clearly misunderstood what this means. I thought it was a way to add virtual folders to the library (which I thought, in turn, would allow me to choose it as a link on the start menu), but instead it recreated my already existing user folder, AppData and all. I didn't notice this until today. Then I tried setting permissions for my User folder to full control, recursively... Confused but not giving up,I thought I could maybe create a shortcut to the NetHood folder manually, but instead got hit with an access denied error. So I tried to change the permission levels for all sub-folders to my user folder so that I had full control. I got several access denied errors along the way. At this point I gave up, went out, ended up caught in the rain and stuck on a friend's couch and showing up late for work the next day. Thanks for nothing, Microsoft. When I finally got home today (20 hours later), I noticed that Firefox was acting really strange. I tried opening Chrome to see if the problem was client side or server side, and instead got the above-mentioned "you don't have permission to open this program" alert. And I think that's the whole story. Oh, I also did a system restore, but not chose a point from this morning (an auto update), and it worked but the problem wasn't fixed. And then all the earlier restore points were gone. So the questions are: a) is there a way to set the admin and user privs back to "default"? b) would this, in anyone's expert opinion, fix the problems I'm having? c) how come being logged in as an admin isn't the same as being logged in with admin privs? It seems that half the time I have to do run as admin for fairy standard things because i'm being treated as me-theuser and not me-theadmin. Thanks for reading.

    Read the article

  • Scan a Windows PC for Viruses from a Ubuntu Live CD

    - by Trevor Bekolay
    Getting a virus is bad. Getting a virus that causes your computer to crash when you reboot is even worse. We’ll show you how to clean viruses from your computer even if you can’t boot into Windows by using a virus scanner in a Ubuntu Live CD. There are a number of virus scanners available for Ubuntu, but we’ve found that avast! is the best choice, with great detection rates and usability. Unfortunately, avast! does not have a proper 64-bit version, and forcing the install does not work properly. If you want to use avast! to scan for viruses, then ensure that you have a 32-bit Ubuntu Live CD. If you currently have a 64-bit Ubuntu Live CD on a bootable flash drive, it does not take long to wipe your flash drive and go through our guide again and select normal (32-bit) Ubuntu 9.10 instead of the x64 edition. For the purposes of fixing your Windows installation, the 64-bit Live CD will not provide any benefits. Once Ubuntu 9.10 boots up, open up Firefox by clicking on its icon in the top panel. Navigate to http://www.avast.com/linux-home-edition. Click on the Download tab, and then click on the link to download the DEB package. Save it to the default location. While avast! is downloading, click on the link to the registration form on the download page. Fill in the registration form if you do not already have a trial license for avast!. By the time you’ve filled out the registration form, avast! will hopefully be finished downloading. Open a terminal window by clicking on Applications in the top-left corner of the screen, then expanding the Accessories menu and clicking on Terminal. In the terminal window, type in the following commands, pressing enter after each line. cd Downloadssudo dpkg –i avast* This will install avast! on the live Ubuntu environment. To ensure that you can use the latest virus database, while still in the terminal window, type in the following command: sudo sysctl –w kernel.shmmax=128000000 Now we’re ready to open avast!. Click on Applications on the top-left corner of the screen, expand the Accessories folder, and click on the new avast! Antivirus item. You will first be greeted with a window that asks for your license key. Hopefully you’ve received it in your email by now; open the email that avast! sends you, copy the license key, and paste it in the Registration window. avast! Antivirus will open. You’ll notice that the virus database is outdated. Click on the Update database button and avast! will start downloading the latest virus database. To scan your Windows hard drive, you will need to “mount” it. While the virus database is downloading, click on Places on the top-left of your screen, and click on your Windows hard drive, if you can tell which one it is by its size. If you can’t tell which is the correct hard drive, then click on Computer and check out each hard drive until you find the right one. When you find it, make a note of the drive’s label, which appears in the menu bar of the file browser. Also note that your hard drive will now appear on your desktop. By now, your virus database should be updated. At the time this article was written, the most recent version was 100404-0. In the main avast! window, click on the radio button next to Selected folders and then click on the “+” button to the right of the list box. It will open up a dialog box to browse to a location. To find your Windows hard drive, click on the “>” next to the computer icon. In the expanded list, find the folder labelled “media” and click on the “>” next to it to expand it. In this list, you should be able to find the label that corresponds to your Windows hard drive. If you want to scan a certain folder, then you can go further into this hierarchy and select that folder. However, we will scan the entire hard drive, so we’ll just press OK. Click on Start scan and avast! will start scanning your hard drive. If a virus is found, you’ll be prompted to select an action. If you know that the file is a virus, then you can Delete it, but there is the possibility of false positives, so you can also choose Move to chest to quarantine it. When avast! is done scanning, it will summarize what it found on your hard drive. You can take different actions on those files at this time by right-clicking on them and selecting the appropriate action. When you’re done, click Close. Your Windows PC is now free of viruses, in the eyes of avast!. Reboot your computer and with any luck it will now boot up! Alternatives to avast! If avast! and a liberal amount of Googling doesn’t fix your problem, it’s possible that a different virus scanner will fix your obscure issue. Here are a list of other virus scanners available for Ubuntu that are either free or offer free trials. See their support forums for help on installing these virus scanners. Avira AntiVir Personal for Linux / Solaris Panda Antivirus for Linux Installation and usage guide from Ubuntu F-PROT Antivirus for Linux ClamAV installation and usage guide from Ubuntu NOD32 Antivirus for Linux Kaspersky Anti-Virus 2010 Bitdefender Antivirus for Unices Conclusion Running avast! from a Ubuntu Live CD can clean the vast majority of viruses from your Windows PC. This is another reason to always have a Ubuntu Live CD ready just in case something happens to your Windows installation! Similar Articles Productive Geek Tips Secure Computing: Windows Live OneCareHow To Remove Antivirus Live and Other Rogue/Fake Antivirus MalwareUse the Windows Key for the "Start" Menu in Ubuntu LinuxScan Files for Viruses Before You Download With Dr.WebAsk the Readers: Share Your Tips for Defeating Viruses and Malware TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 The Ultimate Guide For YouTube Lovers Will it Blend? iPad Edition Penolo Lets You Share Sketches On Twitter Visit Woolyss.com for Old School Games, Music and Videos Add a Custom Title in IE using Spybot or Spyware Blaster When You Need to Hail a Taxi in NYC

    Read the article

  • Week in Geek: USDA Chooses Microsoft for Cloud Services Edition

    - by Asian Angel
    This week we learned how to create geeky LED holiday lights with old bottles, dig deeper in Windows Defrag via the command prompt, use Google Chrome’s drag/drop feature to upload files easier, find great gift recommendations by looking through the How-To Geek holiday gift guide, and have fun adding Merry Christmas fonts to our computers. Photo by ntr23. Random Geek Links It has been a busy week, so we have extra news link goodness with information that is good for you to know. USDA making the move to Microsoft The U.S. Department of Agriculture has announced that it has chosen Microsoft to host things like e-mail, instant messaging, and collaboration through the software giant’s Business Productivity Online Suite. Google says it was cut off from USDA project bid Google is claiming that it was not given a chance to bid on a cloud-computing project for the U.S. Department of Agriculture, for which the contract was awarded to rival Microsoft. Apache is being forced into a Java Fork When Oracle rolled over Apache and Google’s objections to its Java plans in December, the scene was set for Apache to leave and, eventually, force a Java code fork. Tumblr explains daylong outage After experiencing an outage that started on Sunday afternoon and stretched through most of the day yesterday, Tumblr has explained what happened. Google demos Chrome OS, launches pilot program During a press briefing this week in San Francisco, Google launched the Chrome application store and demonstrated Chrome OS, its browser-centric netbook operating system. Don’t expect Spotify in U.S. this holiday season As of last week, Spotify had yet to sign a single licensing deal with a major label, after spending more than a year negotiating, multiple music sources told CNET. December 2010 Patch Tuesday will come with most bulletins ever According to the Microsoft Security Response Center, Microsoft will issue 17 Security Bulletins addressing 40 vulnerabilities on Tuesday, December 14. It will also host a webcast to address customer questions the following day. Hacker plants back door in Symbian firmware Indian hacker Atul Alex has had a look at the firmware for Symbian S60 smartphones and come up with a back door for it. PC quarantines raise tough complexities The concept of quarantining PCs to prevent widespread infection is “interesting, but difficult to implement, with far too many problems”, said security experts. Symantec: DDoS attacks hard to defend It has surfaced that the distributed denial of service (DDoS) attacks on Visa and MasterCard Web sites on Wednesday were carried out by a toolkit known as low orbit ion cannon (LOIC). Web Sockets and the risks of unfinished standards Enthusiasm for a promising new standard called Web Sockets has quickly cooled in some quarters as a potential security problem led some browser makers to hastily postpone support. Internet Explorer 9 to get tracking protection Microsoft is making changes to Internet Explorer 9’s security features that will better enable users to keep sites from tracking their activity across browsing sessions. NASA sold PCs with sensitive data NASA failed to remove sensitive data from computers that it sold, according to an audit report released this week. Cybercrooks create fake Amazon receipts The bad guys have created yet another online scam, this one involving fake Amazon receipts. World of Warcraft character move fees waived Until December 22, Blizzard will allow free realm transfers from 25 highly populated servers to alleviate log-in queues or performance issues. (The free transfers are one-way and one-time only.) SpaceX Dragon reaches orbit atop a Falcon with a fiery tail The Space Exploration Technologies corporation has become the first nongovernmental entity to put a vehicle into low Earth orbit. Geek Video of the Week If birds have wings, then why are the Angry Birds using slingshots? Photo by Dorkly Bits. Wait… Birds have Wings, Why are the Angry Ones Using Slingshots? Sysadmin Geek Tips How To Setup Email Alerts on Linux Using Gmail or SMTP Linux machines may require administrative intervention in countless ways, but without manually logging into them how would you know about it? Here’s how to setup emails to get notified when your machines want some tender love and attention. Random TinyHacker Links Red Panda Webcam Support Firefox and the Knoxville Zoo’s Red Panda program. Christmas Icons (Icons we like) Superb set of holiday icons by lgp85 at deviantArt. Download the .zip and use as .png or convert to .ico at Convertico.com or with tiny app Imagicon. Super User Questions Enjoy reading the great answers to this week’s popular questions from Super User Useful USB boot disks? DVD/CD burning .zip: is it more reliable, faster, longer lasting to burn a zip of files rather than the files as a folder? What are other ways to backup my files if I do not have an external drive? Anti virus what is the difference between these all? How can I block all Facebook elements/content? How-To Geek Weekly Article Recap Have you had a busy week between work and preparing for the holidays? Get caught up on your HTG reading with our hottest articles of the week. 20 Windows Keyboard Shortcuts You Might Not Know The 50 Best Registry Hacks that Make Windows Better LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology HTG Explains: Which Linux File System Should You Choose? How to Use and Customize Google Chrome Web Apps One Year Ago on How-To Geek This week’s batch of retro geeky goodness is all about customizing Windows 7. ClassicShell Adds Classic Start Menu and Explorer Features to Windows 7 Get an Aero-Styled Classic Start Menu in Windows 7 Customize the Windows 7 Logon Screen Get the Classic Style Network Activity Indicator Back in Windows 7 How To Enable Check Boxes for Items In Windows 7 The Geek Note We would like you to join us in welcoming Jason Fitzpatrick to the writing staff here at How-To Geek. He started with us this past week, so take some time to read through his articles about the Wii, Kindle, & PlayStation 2 Peripherals and leave a friendly comment to say “Hi”! Got a great tip to share? Make sure to send it in to us at [email protected]. Photo by real00. Latest Features How-To Geek ETC The 50 Best Registry Hacks that Make Windows Better The How-To Geek Holiday Gift Guide (Geeky Stuff We Like) LCD? LED? Plasma? The How-To Geek Guide to HDTV Technology The How-To Geek Guide to Learning Photoshop, Part 8: Filters Improve Digital Photography by Calibrating Your Monitor Our Favorite Tech: What We’re Thankful For at How-To Geek Settle into Orbit with the Voyage Theme for Chrome and Iron Awesome Safari Compass Icons Set Escape from the Exploding Planet Wallpaper Move Your Tumblr Blog to WordPress Pytask is an Easy to Use To-Do List Manager for Your Ubuntu System Snowy Christmas House Personas Theme for Firefox

    Read the article

  • Try out Windows Phone 7 on your PC today

    - by Matthew Guay
    Anticipation has been building for the new Windows Phone 7 Series ever since Microsoft unveiled it at the Mobile World Congress in February.  Now, thanks to free developer tools, you can get a first-hand experience of the basic Windows Phone 7 Series devices on your PC. Windows Phone 7 Series represents a huge change in the mobile field for Microsoft, bringing the acclaimed Zune HD UI to an innovative phone platform.  Windows Mobile has often been criticized for being behind other Smartphone platforms, but Microsoft seeks to regain the lead with this new upcoming release.  A platform must have developers behind it to be useful, so they have released a full set of free development tools so anyone can make apps for it today.  Or, if you simply want to play with Windows Phone 7, you can use the included emulator to try out the new Metro UI.  Here’s how to do this today on your Vista or 7 computer. Please note: These tools are a Customer Technology Preview release, so only install them if you’re comfortable using pre-release software. Getting Started First, download the Windows Phone Developer Tools CTP (link below), and run the installer.  This will install the Customer Technology Preview (CTP) versions of Visual Studio 2010 Express for Windows Phone, Windows Phone Emulator, Silverlight for Windows Phone, and XNA 4.0 Game Studio on your computer, all of which are required and cannot be installed individually. Accept the license agreement when prompted. Click “Install Now” to install the tools you need.  The only setup customization option is where to save the files, so choose Customize if you need to do so. Setup will now automatically download and install the components you need, and will additionally download either 32 or 64 bit programs depending on your operating system. About halfway thorough the installation, you’ll be prompted to reboot your system.  Once your computer is rebooted, setup will automatically resume without further input.   When setup is finished, click “Run the Product Now” to get started. Running Windows Phone 7 on your PC Now that you’ve got the Windows Phone Developer tools installed, it’s time to get the Windows Phone emulator running.  If you clicked “Run the Product Now” when the setup finished, Visual Studio 2010 Express for Windows Phone should have already started.   If not, simply enter “visual studio” in your start menu search and select “Microsoft Visual Studio 2010 Express for Windows Phone”. Now, to run the Windows Phone 7 emulator, we have to test an application.  So, even if you don’t know how to program, we can open a phone application template, and then test it to run the emulator.  First, click New Project on the left hand side of the front page. Any of the application templates would work for this, but here let’s select “Windows Phone Application”, and then click Ok. Here’s your new application template, which already contains the basic phone application framework.  This is where you’d start if you want to develop a Windows Phone app, but for now we just want to see Windows Phone 7 in action. So, to run the emulator, click Debug in the menu and then select Start Debugging. Your new application will launch inside the Windows Phone 7 Series emulator.  The default template doesn’t give us much, but it does show an example application running in Windows Phone 7.   Exploring Windows Phone 7 Click the Windows button on the emulator to go to the home screen.  Notice the Zune HD-like transition animation.  The emulator only includes Internet Explorer, your test application, and a few settings. Click the arrow on the right to see the available applications in a list. Settings lets you change the theme, regional settings, and the date and time in your emulator.  It also has an applications settings pane, but this currently isn’t populated. The Time settings shows a unique Windows Phone UI. You can return to the home screen by pressing the Windows button.  Here’s the Internet Explorer app running, with the virtual keyboard open to enter an address.  Please note that this emulator can also accept input from your keyboard, so you can enter addresses without clicking on the virtual keyboard. And here’s Google running in Internet Explorer on Windows Phone 7. Windows Phone 7 supports accelerometers, and you can simulate this in the emulator.  Click one of the rotate buttons to rotate the screen in that direction. Here’s our favorite website in Internet Explorer on Windows Phone 7 in landscape mode. All this, running right inside your Windows 7 desktop… Developer tools for Windows Phone 7 Although it may be fun to play with the Windows Phone 7 emulator, developers will be more excited to actually be able to create new and exciting apps for it.  The Windows Phone Developer Tools download includes Visual Studio Express and XNA Game Studio 4.0 which lets you create enticing games and apps for Windows Phones.  All development for Windows Phones will be in C#, Silverlight, and the XNA game framework.  Visual Studio Express for Windows Phone includes templates for these, and additionally has code samples to help you get started with development. Conclusion Many features are still not functional in this preview version, such as the search button and most of the included applications.  However, this still gives you a great way to experience firsthand the future of the Windows Phone platform.  And, for developers, this is your chance to set your mark on the Windows Phone 7 Series even before it is released to the public.  Happy playing and developing! Links Download Windows Phone Developer Tools CTP Windows Phone Developer Site Similar Articles Productive Geek Tips Keep Track of Homework Assignments with SoshikuWeekend Fun: Watch Television On Your PC With TVUPlayerEasily Manage Your Downloads with Download StatusbarCreate a Shortcut or Hotkey to Mute the System Volume in WindowsHow-To Geek on Lifehacker: How to Make Windows Vista Less Annoying TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Convert the Quick Launch Bar into a Super Application Launcher Automate Tasks in Linux with Crontab Discover New Bundled Feeds in Google Reader Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family

    Read the article

  • The Windows Browser Ballot Screen Offers Web Browser Choice to European Users

    - by Matthew Guay
    Since March, our friends across the pond in Europe get to decide which browser they want to install with their Windows OS. Today we thought we would take a look at the ballot choices, some are well known, and others you may not have heard of. Windows users in European countries should start seeing the so called “Browser Ballot Screen” after installing the Windows Update KB976002 (link below). The browser ballot offers a dozen different browsers, including some you’ve likely never heard of.  They each have some unique features, and are all free, and here we take a quick look at each of them. Internet Explorer 8 Internet Explorer is the world’s most used web browser, as it’s bundled with Windows. It also includes several unique features, including Accelerators that make it easy to search or find a map of a location, and InPrivate filtering to directly control what sites can get personal information.  Additionally, it offers great integration with Windows Touch and the new taskbar in Windows 7. IE 8 runs on Windows XP and newer, and is bundled with Windows 7. Mozilla Firefox 3.6 Firefox is the most popular browser other than Internet Explorer.  It is the modern descendant of Netscape, and is loved by web developers for its adherence to web standards, openness, and expandability.  It offers thousands of Add-ons and themes to let you customize it to fit your preferences. The most recent version has added Personas, which are quick, lightweight themes to let you personalize the look your browser. It’s open source, and runs on all modern versions of Windows, Mac OS X, and Linux. Of course thanks to Asian Angel, our resident browser expert, you can check out several articles regarding this popular IE alternative. Google Chrome 4 Google Chrome has gained an impressive amount of market share during its short time in the market. It offers a minimalistic interface and fast speeds with intensive web applications. The address bar is also a search bar, so you can enter a search query or web address and quickly get the information you need. With version 4 you can add a growing number of extensions, personalize it with a variety of stylish themes, and automatically translate foreign websites into your own language. Opera 10.50 Although Opera has been around for over a decade, relatively few users have used it. With the new 10.50 release, Opera has many unique features packed in a sleek UI. It integrates great with Aero and the Windows 7 taskbar, and lets you preview the contents of your websites in the tab bar. It also includes Opera Unite, a small personal web server to make file sharing easy, Opera Turbo to speed up your internet when the connection is slow, and Opera Link to keep all your copies of Opera in sync. It’s a popular browser on many mobile devices, and version 10.50 has a lot of enhancements. Apple Safari 4 Safari is the default browser in Mac OS X, and starting with version 3 it has been available for Windows as well. It’s based on Webkit, the popular new rendering engine that provides great speed and standards compatibility.  Safari 4 lets you browse your browsing history in a unique Coverflow interface, and shows your Top Sites in a fancy, 3D interface.  It’s also great for viewing mobile websites for the iPhone and other mobile devices through Developer Tools. Flock 2.5 Based on the popular Firefox core, Flock brings a multitude of social features to your browsing experience. You can view the latest YouTube videos, Flickr pictures, update your favorite social network, and keep up with your webmail thanks to It’s integration with a wide variety of services. You can even post to your blog through the integrated blog editor. If your time online is mostly spent in social services, this may be a browser you want to check out. Maxthon 2.5 Maxthon is a unique browser that builds on Internet Explorer to bring more features with IE’s rendering. Formerly known as MyIE2, Maxthon was popular for bringing tabbed browsing with IE rendering during the days of IE 6.  Today Maxthon supports a wide range of plugins and skins, so you can customize it however you want. It includes mouse gestures, a web accelerator to speed up pokey internet connections, a content blocker to remove unwanted content from sites, an online account to backup your favorites, and a nice download manager. Avant Browser Another nice browser based on Internet Explorer, Avant brings a wide variety of features in a nice brushed-metal interface. It includes an integrated AutoFill for forms, mouse gestures, customizable skins, and privacy protection features. It also includes a Flash blocker that will only load flash in webpages when you select them. You can also integrate Avant with an online account to store your bookmarks, feeds, settings and passwords online. Sleipnir Sleipnir is a customizable browser meant for advance users that is quite popular in Japan. It’s built on the Trident engine and virtually every aspect of is customizable unlike Internet Explorer.   FlashPeak SlimBrowser SlimBrowser from FlashPeak incorporates a lot of features like Popup Killer, Auto Login, site filtering and more. It’s based on Internet Explorer but offers a lot more customizable options out of the box.   K-meleon This basic browser is light on system resources and based on the Gecko engine. It’s been in development for years on SourceForge, and if you like to tweak virtually any aspect of your browser, this might be a good choice for you.   GreenBrowser GreenBrowser is based on Internet Explorer and is available in several languages. It has a large amount of features out of the box and is light on system resources.   Conclusion The European Union asked for more choices in the web browser they could choose from when installing Windows, and with the Browser Ballot Screen, they certainly get a variety to choose from.  If you’ve tried out some of the lesser known browsers, or think some important ones have been left out, leave a comment and tell us about it. Learn More About the Browser Ballot Screen and Download Alternatives to IE Windows Update KB976002 Similar Articles Productive Geek Tips Set the Default Browser on Ubuntu From the Command LineQuick Tip: Empty Internet Explorer 7 Cache when Browser is ClosedView Hidden Files and Folders in Ubuntu File BrowserSet the Default Browser and Email Client in UbuntuAccess Multiple Browsers from Firefox with Browser View Plus TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 PCmover Professional Play Music in Chrome by Simply Dragging a File 15 Great Illustrations by Chow Hon Lam Easily Sync Files & Folders with Friends & Family Amazon Free Kindle for PC Download Stretch popurls.com with a Stylish Script (Firefox) OldTvShows.org – Find episodes of Hitchcock, Soaps, Game Shows and more

    Read the article

  • Install Ubuntu Netbook Edition with Wubi Installer

    - by Matthew Guay
    Ubuntu is one of the most popular versions of Linux, and their Netbook Remix edition is especially attractive for netbook owners.  Here we’ll look at how you can easily try out Ubuntu on your netbook without a CD/DVD drive. Netbooks, along with the growing number of thin, full powered laptops, lack a CD/DVD drive.  Installing software isn’t much of a problem since most programs, whether free or for-pay, are available for download.  Operating systems, however, are usually installed from a disk.  You can easily install Windows 7 from a flash drive with our tutorial, but installing Ubuntu from a USB flash drive is more complicated.  However, using Wubi, a Windows installer for Ubuntu, you can easily install it directly on your netbook and even uninstall it with only a few clicks. Getting Started Download and run the Wubi installer for Ubuntu (link below).  In the installer, select the drive you where you wish to install Ubuntu, the size of the installation (this is the amount dedicated to Ubuntu; under 20Gb should be fine), language, username, and desired password.  Also, from the Desktop environment menu, select Ubuntu Netbook to install the netbook edition.  Click Install when your settings are correct. Wubi will automatically download the selected version of Ubuntu and install it on your computer. Windows Firewall may ask if you want to unblock Wubi; select your network and click Allow access. The download will take around an hour on broadband, depending on your internet connection speed.  Once the download is completed, it will automatically install to your computer.  If you’d prefer to have everything downloaded before you start the install, download the ISO of Ubuntu Netbook edition (link below) and save it in the same folder as Wubi. Then, when you run Wubi, select the netbook edition as before and click Install.  Wubi will verify that your download is valid, and will then proceed to install from the downloaded ISO.  This install will only take about 10 minutes. Once the install is finished you will be asked to reboot your computer.  Save anything else you’re working on, and then reboot to finish setting up Ubuntu on your netbook. When your computer reboots, select Ubuntu at the boot screen.  Wubi leaves the default OS as Windows 7, so if you don’t select anything it will boot into Windows 7 after a few seconds. Ubuntu will automatically finish the install when you boot into it the first time.  This took about 12 minutes in our test. When the setup is finished, your netbook will reboot one more time.  Remember again to select Ubuntu at the boot screen.  You’ll then see a second boot screen; press your Enter key to select the default.   Ubuntu only took less than a minute to boot in our test.  When you see the login screen, select your name and enter your password you setup in Wubi.  Now you’re ready to start exploring Ubuntu Netbook Remix. Using Ubuntu Netbook Remix Ubuntu Netbook Remix offers a simple, full-screen interface to take the best advantage of netbooks’ small screens.  Pre-installed applications are displayed in the application launcher, and are organized by category.  Click once to open an application. The first screen on the application launcher shows your favorite programs.  If you’d like to add another application to the favorites pane, click the plus sign beside its icon. Your files from Windows are still accessible from Ubuntu Netbook Remix.  From the home screen, select Files & Folders on the left menu, and then click the icon that says something like 100GB Filesystem under the Volumes section. Now you’ll be able to see all of your files from Windows.  Your user files such as documents, music, and pictures should be located in Documents and Settings in a folder with your user name. You can also easily install a variety of free applications via the Software Installer. Connecting to the internet is also easy, as Ubuntu Netbook Remix automatically recognized the WiFi adaptor on our test netbook, a Samsung N150.  To connect to a wireless network, click the wireless icon on the top right of the screen and select the network’s name from the list. And, if you’d like to customize your screen, right-click on the application launcher and select Change desktop background. Choose a background picture you’d like. Now you’ll see it through your application launcher.  Nice! Most applications are opened full-screen.  You can close them by clicking the x on the right of the program’s name. You can also switch to other applications from their icons on the top left.  Open the home screen by clicking the Ubuntu logo in the far left. Changing Boot Options By default, Wubi will leave Windows as the default operating system, and will give you 10 seconds at boot to choose to boot into Ubuntu.  To change this, boot into Windows and enter Advanced system settings in your start menu search. In this dialog, click Settings under Startup and Recovery. From this dialog, you can select the default operating system and the time to display list of operating systems.  You can enter a lower number to make the boot screen appear for less time. And if you’d rather make Ubuntu the default operating system, select it from the drop-down list.   Uninstalling Ubuntu Netbook Remix If you decide you don’t want to keep Ubuntu Netbook Remix on your computer, you can uninstall it just like you uninstall any normal application.  Boot your computer into Windows, open Control Panel, click Uninstall a Program, and enter ubuntu in the search box.  Select it, and click Uninstall. Click Uninstall at the prompt.  Ubuntu uninstalls very quickly, and removes the entry from the bootloader as well, so your computer is just like it was before you installed it.   Conclusion Ubuntu Netbook Remix offers an attractive Linux interface for netbooks.  We enjoyed trying it out, and found it much more user-friendly than most Linux distros.  And with the Wubi installer, you can install it risk-free and try it out on your netbook.  Or, if you’d like to try out another alternate netbook operating system, check out our article on Jolicloud, another new OS for netbooks. Links Download Wubi Installer for Windows Download Ubuntu Netbook Edition Similar Articles Productive Geek Tips Easily Install Ubuntu Linux with Windows Using the Wubi InstallerInstall VMware Tools on Ubuntu Edgy EftHow to install Spotify in Ubuntu 9.10 using WineInstalling PHP5 and Apache on UbuntuInstalling PHP4 and Apache on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips VMware Workstation 7 Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Explorer++ is a Worthy Windows Explorer Alternative Error Goblin Explains Windows Error Codes Twelve must-have Google Chrome plugins Cool Looking Skins for Windows Media Player 12 Move the Mouse Pointer With Your Face Movement Using eViacam Boot Windows Faster With Boot Performance Diagnostics

    Read the article

  • Getting Started with Media Browser for Windows Media Center

    - by DigitalGeekery
    If you are a Windows Media Center user, you’ll really want to check out Media Browser. The Media Browser plug-in for Windows Media Center takes your digital media files and displays them in a visually appealing, user friendly interface, complete with images and metadata. Requirements Windows 7 or Vista Microsoft .Net 3.5 Framework  Preparing your Media Files For Media Browser to be able to automatically download images and metadata for your media libraries, your files will have to be correctly named. For example, if you have an mp4 file of the movie Batman Begins, it needs to be named Batman Begins.mp4. It cannot be Batmanbegins.mp4 or Batman-begins.mp4. Otherwise, it’s unlikely that Media Browser will display images and metadata. If you find some of your files aren’t pulling cover art or metadata, double-check the official title of the media on a site like IMBD.com. TV Show files TV show files are handled a bit differently. Every TV series in your collection must have a main folder with the show’s name and individual subfolders for each season. Here is an example of folder structure and supported naming conventions. TV Shows\South Park\Season 1\s01e01 – episode 1.mp4 TV Shows\South Park\Season 1\South Park 1×01 – episode 1.mp4 TV Shows\South Park\Season 1\101 – episode 1.mp4  Note: You need to always have a Season 1 folder even if the show only has only one season. If you have several seasons of a particular show, but don’t happen to have Season 1, simply create a blank season 1 folder. Without a season 1 folder, other seasons will not display properly. Installation and Configuration Download and run the latest Media Browser .msi file by taking the defaults. (Download link below) When you reach the final window, leave the “Configure initial settings” box checked, and click “Finish.” You may get a pop up window informing you that folder permissions are not set correctly for Media Browser. Click “Yes.” Adding Your Media The Browser Configuration Tool should have opened automatically. If not, you can open it by going to Start > All Programs > Media Browser > Media Browser Configuration Wizard. To begin adding media files, click “Add.” Browse for a folder that contains media files and click “OK.” Here we are adding a folder with a group of movie files. You can add multiple folders to each media library. For example, if you have movie files stored in 4 or 5 different folders, you can add them all under a single library in Media Browser.  To add additional folders, click the “Add” button on the right side under your currently added folder. The “Add” button to the left will add an additional Media Library, such as one for TV Shows. When you are finished, close out of the Media Browser Configuration Tool. Open Windows Media Center. You will see Media Browser tile on the main interface. Click to open it. When you initially open Media Browser, you will be prompted to run the initial configuration. Click “OK.” You will see a few general configuration options. The important option is the Metadata. Leave this option checked (it is by default) if you wish to pull images & other metadata for your media. When finished, click “Continue,” and then “OK” to restart Media Browser. When you re-enter Media Browser you’ll see your Media Categories listed below, and recently added files in the main display. Click on a Media Library to view the files.   Click “View” at the top to check out some of the different display options to choose from. Below you see can “Detail.” This presents your videos in a list to the left. When you hover over a title, the synopsis and cover art is displayed to the right. “Cover Flow” displays your titles in a right to left format with mirror cover art. “Thumb Strip” displays your titles in a strip along the bottom with a synopsis, image, and movie data above. Configurations Settings and options can be changed through the Media Browser Configuration Tool, or directly in Media Browser by clicking on the “Wrench” at the bottom right of the main Media Browser page. Certain settings may only be available in one location or the other. Some will be available in both places.   Plug-ins and Themes Media Browser features a variety of Plug-ins and Themes that can add optional customization and slick visual appeal. To install plug-ins or themes, open the Media Browser Configuration Tool. Click on the “plug-ins” tab, and then the “More Plug-ins…” button. Note: Clicking on “Advanced” at the top will reveal several additional configuration tabs. Browse the list of plug-ins on the left. When you find want you like, select it and then click “Install.” When the install is complete, you’ll see them listed under “Installed Plug-ins.” To activate any installed theme, click on the “Display” tab. Select it from the Visual Theme drop down list. Close out of the Media Browser Configuration Tool when finished. Some themes, such as the “Diamond” theme shown below, include optional views and settings which can be accessed through a configuration button at the top of the screen. Clicking on the movie gives you additional images and information such as a synopsis, runtime, IMDB rating…   … and even actors and character names.   All that’s left is to hit “Play” when you’re ready to watch.   Conclusion Media Browser is a fantastic plug-in that brings an entirely different level of media management and aesthetics to Windows Media Center. There are numerous additional customizations and configurations we have not covered here such as adding film trailers, music support, and integrating Recorded TV. Media Browser will run on both Windows 7 and Vista. Extenders are also supported but may require additional configuration. Download Media Browser Similar Articles Productive Geek Tips Using Netflix Watchnow in Windows Vista Media Center (Gmedia)Schedule Updates for Windows Media CenterIntegrate Hulu Desktop and Windows Media Center in Windows 7Add Color Coding to Windows 7 Media Center Program GuideIntegrate Boxee with Media Center in Windows 7 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 If it were only this easy SyncToy syncs Files and Folders across Computers on a Network (or partitions on the same drive) Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver

    Read the article

  • WWDC and Tech Ed: A Tale of Two DevCons

    - by andrewbrust
    Next week marks the first full week of June.  Summer will feel in full swing and it will be a pretty big season for technology.  In seeming acknowledgement of that very fact, both Apple and Microsoft will be holding large developers conferences starting Monday.  Apple will hold its annual Worldwide Developers Conference (WWDC) in lovely San Francisco and Microsoft will hold its Tech Ed conference in muggy, oil-laden yet soulful New Orleans.  A brief survey of each show reveals much about the differences in each company’s offerings, strategy, and approach to customers and partners. In the interest of full disclosure, I must explain that I will be speaking at Microsoft’s Tech Ed show, and have done so, on and off, since 2003.  I have never been to an Apple conference and, as readers of this blog may know, I acquired my first ever Apple product 2 months ago when I bought an iPad on the day of that product’s launch.  I think I have keen insights into Microsoft’s conference.  My ability to comment on Apple’s event ranges somewhere between backseat driver and naive observer.  Just so you know. Although both shows cater to their respective company’s developers, there are a number of differences in the events’ purposes and content approaches.  First off, let’s consider each show as a news and PR vehicle.  WWDC will feature Steve Jobs’ keynote address and most likely will be where Apple officially reveals details of its 4th-generation iPhone. Jobs will likely also provide deep background information on the corresponding iPhone OS release.  These presumed announcements will make the show a magnet for the tech press and tech blogger elite.  Apple’s customers will be interested too, especially since the iPhone OS release will likely be made available to owners of existing iPhone, iPod Touch and iPad devices. Tech Ed, on the other hand, may not be especially newsworthy at all.  The keynote address will be given by Bob Muglia, who is President of the company’s Server and Tools Division, and he’ll likely be reviewing things more than previewing them. That’s because the company has, in the last 6-8 months, already released new versions of a majority of its products, including Windows, Office, SharePoint, SQL Server, Exchange, its Azure cloud platform, its .NET software development layer, its Silverlight Rich Internet Application (RIA) technology and its Visual Studio developer suite.  Redmond’s product pipeline has functioned more like a firehose of late, and the company has a ton of work to do to get developers up to speed on everything that’s new. I know I keep saying “developers,” but in Tech Ed’s case, that’s not really accurate.  In North America, Tech Ed caters to both developers and IT pros (i.e. technologists who work with physical IT infrastructure, as well as security and administration of the server software that runs on it).  This pairing has, since its inception, struck some as anomalous and others, including many exhibitors, as very smart. Certainly, it means Tech Ed ends up being a confab for virtually all professionals in Microsoft’s ecosystem.  And this year, Microsoft’s Business Intelligence (BI) conference will be co-located with Tech Ed, further enhancing that fusion effect. Clearly then, Microsoft’s show will focus on education, as its name assures us.  Apple’s will serve as both a press event and an opportunity to get its own App Store developer channel synced up with its newest technology advances.  For example, we already know that iPhone OS 4.0 will provide for a limited multitasking capability; that will only work well if people know how to code to it in a capable way.  Apple also told us its iAd advertising platform will be part of the new OS, and Steve Jobs insists that’s to provide a revenue opportunity for developers.  This too, then, needs to be explicated and soaked up buy the faithful. A look at each show’s breakout session lineup provides some interesting takeaways.  WWDC will have very few Mac-specific sessions on offer, and virtually no sessions that at are IT- or “Enterprise-“ related.  It’s all about the phone, music players and tablets.  However, WWDC will have plenty of low-level, hardcore tech coverage of such things as Advanced Memory Analysis and Creating Secure Applications, as well as lots of rich media-related content like Core Animation and Game Design and Development.  Beyond Apple’s proprietary platform, WWDC will also feature an array of sessions on HTML 5 and other Web standards.  In all, WWDC offers over 100 technical sessions and hands-on labs. What about Tech Ed’s editorial content?  Like the target audience, it really runs the gamut.  The show has 21 tracks (versus WWDC’s 5) and more than 745 “learning opportunities” which include breakout sessions, demo stations, hands-on labs and BIrds of a Feather discussion sessions.  Topics range from Architecture talks like Patterns of Parallel Programming to cloud computing talks like Building High Capacity Compute Applications with Windows Azure to IT-focused topics like Virtualization of Microsoft SharePoint 2010 Farm Architecture.  I also count 19 sessions on Windows Phone 7.  Unfortunately, with regard to Web standards and HTML 5, only a few sessions are offered, all of them specific to Internet Explorer. All-in-all, Apple’s show looks more exciting and “sexier” than Tech Ed. Microsoft’s show seems a lot more enterprise-focused than WWDC. This is, of course, well in sync with each company’s approach and products.  Microsoft’s content is much wider ranging and bests WWDC in sheer volume of sessions and labs.  I suppose some might argue that less is more; others that Apple’s consumer-focused offerings simply don’t provide for the same depth of coverage to a business audience.  Microsoft has a serious focus on the cloud and  a paucity of coverage on client-side Web standards; Apple has virtually no cloud offering at all.  Again, this reflects each tech titan’s go-to-market strategy. My own take is that employees of each company should attend the other’s event.  The amount of mutual exclusivity in content may make sense in terms of corporate philosophy, but the reality is that each company could stand to diversify into the other’s territory, at least somewhat. My own talk at Tech Ed will focus on competitive analysis around Microsoft’s BI products.  Apple does not today figure into that analysis. Maybe one day it will.

    Read the article

  • Company Review: Google Products

    Google, Inc offers an array of products and services to all of its end-users. However their search capabilities are the foundation for Google’s current success and their primary business focus. Currently, Google offers over twenty different search applications that allow users to search the internet for books, maps, videos, images, products and much more. Their product decisions have allowed users demands to be met while focusing on the free based model. This allows users to access Google data free of charge and indirectly gives Google a strong competitive advantage of other competitors along with the accuracy of the search results. According to Google, Inc, they offer the following types of searching capabilities: Alerts Get email updates on the topics of your choice Blog Search Find blogs on your favorite topics  Books Search the full text of books  Custom Search Create a customized search experience for your community  Desktop Search and personalize your computer  Dictionary Search for definitions of words and phrases Directory Search the web, organized by topic or category Earth Explore the world from your computer Finance Business info, news and interactive charts GOOG-411 Find and connect for free with businesses from your phone  Images Search for images on the web Maps View maps and directions News Search thousands of news stories Patent Search Search the full text of US Patents Product Search Search for stuff to buy Scholar Search scholarly papers Toolbar Add a search box to your browser Trends Explore past and present search trends Videos Search for videos on the web Web Search Search billions of web pages Web Search Features Find movies, music, stocks, books and more mapping Google’s free based business model is only one way it differentiates itself from its competition. There is also a strong focus on the accuracy of search results and the speed in which they are returned to the end-user. Quality function deployment (QFD) is a structured method used to help connect user needs to the design features of a project proposed to address those needs. This method is particularly useful in accounting for needs that are not easily articulated or precisely defined according to the U. S. Department of Transportation Federal Highway Administration. Due to the fact that QFD is so customer driven Google is always in a constant state of change in attempt to reengineer its search algorithms, and other dependant systems so that end-users requirements are constantly being met. Value engineering is a key example of this, Google is constantly trying to improve all aspects of its products, improve system maintainability, and system interoperability. Bridgefield Group defines value engineering as an organized methodology that identifies and selects the lowest lifecycle cost options in design, materials and processes that achieves the desired level of performance, reliability and customer satisfaction. In addition, it seeks to remove unnecessary costs in the above areas and is often a joint effort with cross-functional internal teams and relevant suppliers. Common issues that appear when developing large scale systems like Google’s search applications include modular design of a product and/or service and providing accurate value analysis. A design approach that adheres to four fundamental tenets of cohesiveness, encapsulation, self-containment, and high binding to design a system component as an independently operable unit subject to change is how the Open System Joint Task Force defines modular design. More specifically M. S. Schmaltz defines modular software design as having a large collection of statements strung together in one partition of in-line code; we segment or divide the statements into logical groups called modules. Each module performs one or two tasks, and then passes control to another module. By breaking up the code into "bite-sized chunks", so to speak, we are able to better control the flow of data and control. This is especially true in large software systems. Value analysis is a process to evaluate products and services based on effectiveness, safety, and cost. Value analysis involves assessing the quality as well as the cost of a product or service as defined by the Healthcare Financial Management Association.  “Operations Management deals with the design and management of products, processes, services and supply chains. It considers the acquisition, development, and utilization of resources that firms need to deliver the goods and services their clients want.” (MIT,2010) Google, Inc encourages an open environment between all employees, also known as Googlers. This is reinforced by a cross-section team or cross-functional teams comprised from multiple departments assigned to every project so that every department like marketing, finance, and quality assurance has input on every project. In addition, Google is known for their openness to new ideas regardless of the status or seniority of an employee. In fact, Google allows for 20% of an employee’s time can be devoted to developing new ideas and/or pet projects. HumTech.com defines a cross-functional team as a collection of people with varied levels of skills and experience brought together to accomplish a task. As the name implies, Cross-Functional Team members come from different organizational units. Cross-Functional Teams may be permanent or ad hoc. Google’s search application product strategy primarily focuses on mass customization. This is allows Google to create a base search application and allows results to be returned to the end-users quickly based on specific parameters and search settings. In addition, they also store the data that is returned in case other desire the same results based on other end-users supplying the same customized settings. This allows Google to appear to render search results in virtually real-time to the user while allowing for complete customization of the searching criteria. Greg Vogl, a professor at Uganda Martyrs University, defines mass customization as when a business gives its customers the opportunity to tailor its products or services to the customer's specifications. The IT staff at Google play a key role in ensuring that the search application’s product strategy is maintained simply because the IT staff designs, develops, and maintains all of their proprietary applications. In fact, they also maintain all network infrastructure to ensure that it is available to all end-users. References: http://www.google.com/intl/en/options/ http://ops.fhwa.dot.gov/freight/publications/ftat_user_guide/sec5.htm http://www.bridgefieldgroup.com/bridgefieldgroup/glos9.htm#V http://www.acq.osd.mil/osjtf/termsdef.html http://www.cise.ufl.edu/~mssz/Pascal-CGS2462/prog-dsn.html http://www.hfma.org/publications/business_caring_newsletter/exclusives/Supply+and+Inventory+Terms+Defined.htm http://mitsloan.mit.edu/omg/om-definition.php http://www.humtech.com/opm/grtl/ols/ols3.cfm http://www.gregvogl.net/courses/mis1/glossary.htm

    Read the article

  • TechEd 2010 Day One – How I Travel

    - by BuckWoody
    Normally when I blog on the first day of a conference, well, there hasn’t been a first day yet. So I talk about the value of a conference or some other facet. And normally in my (non-conference) blogs, I show you how I have learned to be a data professional – things I’ve learned how to do over the years. But in all that time, I don’t think I’ve ever talked about a big part of my job – traveling. I’ve traveled a lot throughout the years, when I’ve taught, gone to conferences, consulted and in my current role assisting Microsoft customers with large-scale database system designs.  So I’ll share a few thoughts about what I do. Keep in mind that I travel for short durations, just a day or so, and sometimes I travel internationally. For those I prepare differently – what I’m talking about here is what I do for a multi-day, same-country trip. Hopefully you find it useful. I’ll tag a few other travelers I know to add their thoughts.  Preparing for Travel   When I’m notified of a trip, I begin researching the location. I find the flights, hotel and (if I have to) a car to use while I’m away. We have an in-house system we use to book the travel, but when I travel not-for-Microsoft I use Expedia and Kayak to find what I need.  Traveling on Sunday and Friday is the worst. I have to do it sometimes (like this week) and it’s always a bad idea. But you can blunt the impact by booking as early as you can stand it. That means I have to be up super-early, but the flights are normally on time. I stay flexible, and always have a backup plan in case the flights are delayed or canceled.  For the hotel, I tend to go on the cheaper side, and I look for older hotels that have been renovated, or quirky ones. For instance, in Boise, ID recently I stayed at a 60’s-themed (think Mad-Men) hotel that was very cool. Always I go on the less expensive side – I find the “luxury” hotels nail me for Internet, food, everything. The cheaper places include all kinds of things, and even have breakfasts, shuttles and all kinds of things that start to add up. I even call ahead to make sure there’s an iron and ironing board available, since I’ll need those when I get there.  I find any way I can not to get a car. I use mass-transit wherever possible, and try to make friends and pay their gas to take me places. In a pinch, I’ll use a taxi. It ends up being cheaper, faster, and less stressful all around.  Packing  Over the years I’ve learned never to check luggage whenever I can. To do that, I lay out everything I want to take with me on the bed, and then try and make sure I’m really going to use it. I wear a dark wool set of pants, which I can clean and wear in hot and cold climates. I bring undies and socks of course, and for most places I have to wear “dress up” shirts. I bring at least two print T-Shirts in case I want to dress down for something while I’m gone, but I only bring one set of shoes. All the  clothes are rolled as tightly as possible as I learned in the military. Then I use those to cushion the electronics I take.  For toiletries I bring a shaver, toothpaste and toothbrush, D/O and a small brush. Everything else the hotel will provide.  For entertainment, I take a small Zune, a full PC-Headset (so I can make IP calls on the road) and my laptop. I don’t take books or anything else – everything is electronic. I use E-books (downloaded from our Library), Audio-Books (on the Zune) and I also bring along a Kaossilator (more here) to play music in the hotel room or even on the plane without being heard.  If I can, I pack into one roll-on bag. There’s not a lot better than this one, but I also have a Bag I was given as a prize for something or other here at Microsoft. Either way, I like something with less pockets and more big, open compartments. Everything gets rolled up and packed in, with all of the wires and charges in small bags my wife made for me. The laptop (and anything I don’t want gate-checked) goes on top or in an outside pouch so I can grab it quickly if I have to gate-check the bag. As much as I can, I try to go in one bag. When I can’t (like this week) I use this bag since it can expand, roll up, crush and even be put away later. It’s super-heavy canvas and worth the price. This allows me to not check a bag.  Journey Logistics The day of the trip, I have everything ready since I’m getting up early. I pack a few small snacks inside a plastic large-mouth water bottle, which protects the snacks and lets me get water in the terminal. I bring along those little powdered drink mixes to add to the water.  At the airport, I make a beeline for the power-outlets. I charge up my laptop and phone, and download all my e-mails so I can work on them off-line in the air. I don’t travel as often as I used to – just every month or so now, so I don’t have a membership to an airline club. If I travel much more, I’ll invest in one again – they are WELL worth the money, for the wifi, food and quiet if for nothing else.  I print out my logistics on paper and put that in my pocket – flight numbers, hotel addresses and phones for everything. That way if I have to make a change, I don’t have to boot up anything or even have power to be able to roll with the punches if things change.  Working While Away  While I’m away I realize I’m going to be swamped with things at the conference or with my clients. So I turn on Out-Of-Office notifications to let people know I won’t be as responsive, and I keep my Outlook calendar up to date so my co-workers know what I’m up to. I even update it with hotel and phone info in case they really need to reach me. I share my calendar with my wife so my family knows what I’m doing as well.  I check my e-mail during breaks, but I only respond to them in the evening or early morning at the hotel. I tweet during conferences. The point is to be as present as possible during the event or when I’m at the clients. Both deserve it.  So those are my initial thoughts. I’ll tag Brent Ozar, Brad McGeHee and Paul Randal, and they can tag whomever they wish. Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

    Read the article

  • WP7 Tips–Part I– Media File Coding Techniques to help pass the Windows Phone 7 Marketplace Certification Requirements

    - by seaniannuzzi
    Overview Developing an application that plays media files on a Windows Phone 7 Device seems fairly straight forward.  However, what can make this a bit frustrating are the necessary requirements in order to pass the WP7 marketplace requirements so that your application can be published.  If you are new to this development, be aware of these common challenges that are likely to be made.  Below are some techniques and recommendations on how optimize your application to handle playing MP3 and/or WMA files that needs to adhere to the marketplace requirements.   Windows Phone 7 Certification Requirements Windows Phone 7 Developers Blog   Some common challenges are: Not prompting the user if another media file is playing in the background before playing your media file Not allowing the user to control the volume Not allowing the user to mute the sound Not allowing the media to be interrupted by a phone call  To keep this as simple as possible I am only going to focus on what “not to do” and what “to do” in order to implement a simple media solution. Things you will need or may be useful to you before you begin: Visual Studio 2010 Visual Studio 2010 Feature Packs Windows Phone 7 Developer Tools Visual Studio 2010 Express for Windows Phone Windows Phone Emulator Resources Silverlight 4 Tools For Visual Studio XNA Game Studio 4.0 Microsoft Expression Blend for Windows Phone Note: Please keep in mind you do not need all of these downloaded and installed, it is just easier to have all that you need now rather than add them on later.   Objective Summary Create a Windows Phone 7 – Windows Media Sample Application.  The application will implement many of the required features in order to pass the WP7 marketplace certification requirements in order to publish an application to WP7’s marketplace. (Disclaimer: I am not trying to indicate that this application will always pass as the requirements may change or be updated)   Step 1: – Create a New Windows Phone 7 Project   Step 2: – Update the Title and Application Name of your WP7 Application For this example I changed: the Title to: “DOTNETNUZZI WP7 MEDIA SAMPLE - v1.00” and the Page Title to:  “media magic”. Note: I also updated the background.   Step 3: – XAML - Media Element Preparation and Best Practice Before we begin the next step I just wanted to point out a few things that you should not do as a best practice when developing an application for WP7 that is playing music.  Please keep in mind that these requirements are not the same if you are playing Sound Effects and are geared towards playing media in the background.   If you have coded this – be prepared to change it:   To avoid a failure from the market place remove all of your media source elements from your XAML or simply create them dynamically.  To keep this simple we will remove the source and set the AutoPlay property to false to ensure that there are no media elements are active when the application is started. Proper example of the media element with No Source:   Some Additional Settings - Add XAML Support for a Mute Button   Step 4: – Boolean to handle toggle of Mute Feature Step 5: – Add Event Handler for Main Page Load   Step 6: – Add Reference to the XNA Framework   Step 7: – Add two Using Statements to Resolve the Namespace of Media and the Application Bar using Microsoft.Xna.Framework.Media; using Microsoft.Phone.Shell;   Step 8: – Add the Method to Check the Media State as Shown Below   Step 9: – Add Code to Mute the Media File Step 10: – Add Code to Play the Media File //if the state of the media has been checked you are good to go. media_sample.Play(); Note: If we tried to perform this operation at this point you will receive the following error: System.InvalidOperationException was unhandled Message=FrameworkDispatcher.Update has not been called. Regular FrameworkDispatcher.Update calls are necessary for fire and forget sound effects and framework events to function correctly. See http://go.microsoft.com/fwlink/?LinkId=193853 for details. StackTrace:        at Microsoft.Xna.Framework.FrameworkDispatcher.AddNewPendingCall(ManagedCallType callType, UInt32 arg)        at Microsoft.Xna.Framework.UserAsyncDispatcher.HandleManagedCallback(ManagedCallType managedCallType, UInt32 managedCallArgs) at Microsoft.Xna.Framework.UserAsyncDispatcher.AsyncDispatcherThreadFunction()            It is not recommended that you just add the FrameworkDispatcher.Update(); call before playing the media file. It is recommended that you implement the following class to your solution and implement this class in the app.xaml.cs file.   Step 11: – Add FrameworkDispatcher Features I recommend creating a class named XNAAsyncDispatcher and adding the following code:   After you have added the code accordingly, you can now implement this into your app.xaml.cs file as highlighted below.   Note:  If you application sound file is not playing make sure you have the proper “Build Action” set such as Content.   Running the Sample Now that we have some of the foundation created you should be able to run the application successfully.  When the application launches your sound options should be set accordingly when the “checkMediaState” method is called.  As a result the application will properly setup the media options and/or alert the user accordinglyper the certification requirements.  In addition, the sample also shows a quick way to mute the sound in your application by simply removing the URI source of the media file.  If everything successfully compiled the application should look similar to below.                 <sound playing>   Summary At this point we have a fully functional application that provides techniques on how to avoid some common challenges when working with media files and developing applications for Windows Phone 7.  The techniques mentioned above should make things a little easier and helpful in getting your WP7 application approved and published on the Marketplace.  The next blog post will be titled: WP7 Tips–Part II - How to write code that will pass the Windows Phone 7 Marketplace Requirements for Themes (light and dark). If anyone has any questions or comments please comment on this blog. 

    Read the article

  • Build an Organization Chart In Visio 2010

    - by Mysticgeek
    With trying to manage a business these days, it’s very important to have an Organization Chart to keep everything manageable. Here we’ll show you how to build one in Visio 2010. This Guest Article was written by our friends over at Office 2010 Club. Need for Organization Charts The need of creating Organization Charts are becoming indispensable these days, as companies start focusing on extensive hiring for far reach availability, increase in productivity and targeting diverse markets. Considering this rigorous change, creating an organization chart can help stakeholders in comprehending the ever growing organization structure & hierarchy with an ease. It shows the basic structure of organization along with defining the relationships between employees working in different departments. Opportunely, Microsoft Visio 2010 offers an easy way to create Organization chart. As before now, orthodox ways of listing organization hierarchy have been used for defining the structure of departments along with communication possible including; horizontal and vertical communications. To transform these lists which defines organizational structure, into a detailed chart, Visio 2010 includes an add-in for importing Excel spreadsheet, which comes in handy for pulling out data from spreadsheet to create an organization chart. Importantly, you don’t need to indulge yourself in maze of defining organizational hierarchies and chalking-out structure, as you just need to specify the column & row headers, along with data you need to import and it will automatically create out chart defining; organizational hierarchies with specified credentials of each employee, categorized in their corresponding departments. Creating Organization Charts in Visio 2010 To start off with, we have created an Excel spreadsheet having fields, Name, Supervisor, Designation, Department and Phone. The Name field contains name of all the employees working in different departments, whereas Supervisor field contains name of supervisors or team leads. This field is vital for creating Organization Chart, as it defines the basic structure & hierarchy in chart. Now launch Visio 2010, head over to View tab, under Add-Ons menu, from Business options, click Organization Chart Wizard. This will start Organization Chart Wizard, in the first step, enable Information that’s already stored in a file or database option, and click Next. As we are importing Excel sheet, select the second option for importing Excel spreadsheet. Specify the Excel file path and click Next to continue. In this step, you need to specify the fields which actually defines the structure of an organization. In our case, these are Name & Supervisor fields. After specifying fields, click Next to Proceed further. As organization chart is primarily for showing the hierarchy of departments/employees working in organization along with how they are linked together, and who supervises whom. Considering this, in this step we will leave out Supervisor field, because it’s inclusion wouldn’t be necessary as Visio automatically chalks-out the basic structure defined in Excel sheet. Add the rest of the fields under Displayed fields category, and click Next. Now choose the fields which you want to include in Organization Chart’s shapes and click Next. This step is about breaking the chart into multiple pages, if you are dealing with 100+ employees, you may want to specify numbers of pages on which Organization Chart will be displayed. But in our case, we are dealing with much less amount of data, so we will enable I want the wizard to automatically break my organization chart across pages option. Specify the name you need to show on the top of the page. If you are having less than 20 hierarchies, enter the name of the highest ranked employee in organization and click Finish to end the wizard. It will instantly create an Organization chart out of specified Excel spreadsheet. Highest ranked employee will be shown on top of the organization chart, supervising various employees from different departments. As shown below, his immediate subordinates further manages other employees and so on. For advance customizations, head over to Org Chart tab, here you will find different groups for setting up the Org Chart’s hierarchy and manage other employees’ positions. Under Arrange group, shapes’ arrangements can be changed and it provides easy navigation through the chart. You can also change the type of the position and hide subordinates of selected employee. From Picture group, you can insert a picture of the employees, departments, etc. From synchronization group, you have the option of creating a synced copy and expanding subordinates of selected employee. Under Organization Data group, you can change whole layout of Organization chart from Display Options including; shape display, show divider, enable/disable imported fields, change block position, and fill colors, etc. If at any point of time, you need to insert new position or announce vacancy, Organization Chart stencil is always available on the left sidebar. Drag the desired Organization Chart shape into main diagram page, to maintain the structure integrity, i.e, for inserting subordinates for a specific employee, drag the position shape over the existing employee shape box. For instance, We have added a consultant in organization, who is directly under CEO, for maintaining this, we have dragged the Consultant box and just dropped it over the CEO box to make the immediate subordinate position. Adding details to new position is a cinch, just right-click new position box and click Properties. This will open up Shape Data dialog, start filling in all the relevant information and click OK. Here you can see the newly created position is easily populated with all the specified information. Now expanding an Organization Chart doesn’t require maintenance of long lists any more. Under Design tab, you can also try out different designs & layouts over organization chart to make it look more flamboyant and professional.  Conclusion An Organization Chart is a great way of showing detailed organizational hierarchies; with defined credentials of employees, departments structure, new vacancies, newly hired employees, recently added departments, and importantly shows most convenient way of interaction between different departments & employees, etc. Similar Articles Productive Geek Tips Geek Reviews: Using Dia as a Free Replacement for Microsoft VisioMysticgeek Blog: Create Appealing Charts In Excel 2007Create Charts in Excel 2007 the Easy Way with Chart AdvisorCreate a Hyperlink in a Word 2007 Flow Chart and Hide Annoying ScreenTipsCreate A Flow Chart In Word 2007 TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips HippoRemote Pro 2.2 Xobni Plus for Outlook All My Movies 5.9 CloudBerry Online Backup 1.5 for Windows Home Server Know if Someone Accessed Your Facebook Account Shop for Music with Windows Media Player 12 Access Free Documentaries at BBC Documentaries Rent Cameras In Bulk At CameraRenter Download Songs From MySpace Steve Jobs’ iPhone 4 Keynote Video

    Read the article

  • CodePlex Daily Summary for Tuesday, April 06, 2010

    CodePlex Daily Summary for Tuesday, April 06, 2010New ProjectsASP.NET MVC | SCAFFOLD: Add-in para Visual Studio 2008 que adiciona um poderoso scaffold para o ASP.NET MVC, com suporte ao Entity Framework.ASP.Net Permission Manager: This is an extension of ASP.Net Permission Manager that permission to roles.Babelfish.NET: Babelfish was created as a common framework for navigating several different node-to-node structured data sources, such as HTML, CSS, Javascript, X...CollaSuite: Collaboration Suite, Chat Client ServerdnyFramework: Denny FrameWorkDocxToHtml: DocxToHtmlDomain Driven Design and ASP.NET MVC 2 sample: It's a simple application ASP.NET MVC 2 with DDD modeling approach. It's about how to build maintainable applications applying DDD, IoC and infrast...DRP Address Book: A web based address book implementation using SQL Server 2008, ASP.NET, C#, and CSLA.NETFileSystemHelper SQL Server CLR: FileSystemHelper SQL Server CLR provides a collection of CLR stored procedures and functions for interacting with the file system. Using these sto...Foothill: This is an asp.net Web AppHouseFly controls: Controls for my upcomming app: HouseFlyiTunes Artwork App: This project is related to my iTunes Artwork App blog series. The application will automate the process of collecting album art for music tracks i...Logwiz - Automate the collection of Performance monitor logs using logman.exe: This tool is used to automate the process of collecting Performance monitoring data using the logman.exe on Windows Vista/Windows 7/Windows 2008 an...MailSharp - Beyond MailMessage: An easy-to-use library for .NET developers to send HTML formatted emails using templates with merge tags and embedded images instead of pointing at...MSTests.Fluently: MSTests.Fluently makes it easier for developers and testers to read and write tests with the Visual Studio Unit-Testing Framework. The Sentence-lik...openSIS dot net - Open Source SIS written in C#, built on dotnet 3.5 framework: openSIS dotnet is the dot net version of the popular openSIS Student Information System from OS4ED. This openSIS version is written in C# and is ba...PHP.net: PHP.net is a PHP IDE written in C# for Windows. The IDE will eventually be a complete standalone PHP development enviroment, including a developmen...Recommender System for Optus Website: <Recommender System for Optus Website>This project is trying to apply some recommeder system techniques to telecom company websites. This project ...Sendkeys: This is a tool for remote controlling any Windows Application.Shamil: Shamil WorkSite Directory for SharePoint 2010 (from Microsoft Consulting Services, UK): A solution which provides 'site directory' functionality for SharePoint 2010. Refer to [file:Solution Description|Microsoft.MCSUK.SPSiteDirectory...SPD Workflow action to add user to a security group: This is a custom SPD workflow step developed to facilitate the process of adding users from a list to the security group. Keep in mind this is run...Star Trooper for XNA 2D Tutorial: Source for the Star Trooper XNA 2d Tutorial on XNA-UK (www.XNA-UK.co.uk), including the full set of code and each phase of the tutorial. Additio...TFS WitAdminUI: Team Foundation Server 2010 RC WitAdmin simple application with UIWindows Phone 7 Panorama control: The Windows Phone 7 Panorama control is a sample implementation of a Silverlight control that allows to create "Hub" applications on Windows Phone ...Yulu: Yulu helps you maintain short quotations or your thoughts with your Windows Mobile phones.New ReleasesASP .NET MVC CMS (Content Management System): Atomic CMS 2.0: Atomic CMS 2.0 was released. Please visit http://atomiccms.com/ for download documentation, last release and get more information about Atomic CMS ...ASP.Net Permission Manager: Mal.Web.Security.dll v1.0.2.0: Mal.Web.Security.dll Relealse v1.0.2.0CycleMania Starter Kit EAP - ASP.NET 4 Problem - Design - Solution: Cyclemania 0.08.48: The application now uses Windows Communication Foundation services. See Source Code tab for other recent changes.dotNetInstaller: setup bootstrapper for Windows: 1.10 (Development): Build 1.10.6588.0. Features - Added support for .exe setup components with an optional response file. - Added has_value_disabled option to user-de...Examine: RC 1: This is Examine RC1 release. It includes: Examine UmbracoExamine Lucene.Net 2.9.2Extend SmallBasic: Teaching Extensions v.010: Improved the pentagone crazy quizFileSystemHelper SQL Server CLR: FileSystemHelper CLR Project: Source code for FileSystemHelper CLR assembly.GameStore League Manager: League Manager 1.0.5-Logging: Added Logging functionality to track down bugs.iSun Shut - PC Auto Shutdown: iSun Shut 2.5: Relase Notes: -To properly view the source code please install DotNetBar 8.3 (http://www.devcomponents.com) -The Shutdown after firefox download f...LINQ to Twitter: LINQ to Twitter Beta v2.0.10: New items added since v1.1 include: Support for OAuth (via DotNetOpenAuth), secure communication via https, VB language support, serialization of ...MIC Pattern: !MIC Pattern DAL: Data Access Layer Este arquivo contem a DLL que faz acesso a dados e simplifica as operações de INSERT, UPDATE, DELETE e SELECT em bases de dados ...MVC Foolproof Validation: Alpha 0.1: Server side validation is stable. Client side validation is fairly stable aside from some border cases I hope to address soon. I’m actually using t...OpenGL ES 2.0 Compact Framework Wrapper: First binary release: CAB-installer for installing the sample application provided with the solution. Demonstrates a simple quad with rotation animation. Changes from l...patterns & practices SharePoint Guidance: SPG2010 Drop8: SharePoint Guidance Drop Notes Microsoft patterns and practices ****************************************** ***************************************...PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT: PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT - V3: The Beta Version 3 of the Programmable Software Development Environment features the random generator, longitudinal and cryptographic commands whi...RoTwee: RoTwee (9.0.0.0): New feature in this version : 17102 Tweet rotated count.SharePhone: SharePhone v.1.0.3: Added search functionality. Use clientContext.SearchProvider.Search(..) or clientContext.SearchProvider.KeywordSearch(..) A few examples here: ht...SharePoint Outlook Connector: Version 1.2.4.3: UI has been improved. Some bugs have been resolved.SPD Workflow action to add user to a security group: Version 1 custom workflow action: A custom SPD workflow step that automatically adds user to the correct security group, the user name can be driven from a list item or document li...SQL Server Metadata Toolkit 2008: SQL Server Metadata Toolkit Alpha 5: This release addresses the Issue 10567, which was a recursive view recursing more than 100 times. This was caused by the addition of SQL Parsing in...TFS WitAdminUI: WitAdminUI ver1.0: Download zip file and unzip to TFS2010 RC. And Excute WitAdminUI.exe. Because WitAdmin is made by .net v4.0 so I can't my application with MSI.TFTP Server: TFTP Server 1.0 Installer: Installer for the binary release of TFTP server v 1.0VivoSocial: VivoSocial 7.1.0: Version 7.1.0 of VivoSocial has been released. If you experienced any issues with the previous version, please update your modules to the 7.1.0 rel...WAFFLE: Windows Authentication Functional Framework (LE): 1.3 (Development): Build 1.3.9740.0. Features Added waffle-jna-auth.jar, native Java with JNA port. Misc Project upgraded to Visual Studio 2008.Most Popular ProjectsWBFS ManagerASP.NET Ajax LibraryImage Resizer Powertoy Clone for WindowsSkype Voice ChangerAll-In-One Code FrameworkWindows Live Calendar GadgetMDownloaderWindows 7 USB/DVD Download ToolDroid ExplorerEnhSimMost Active ProjectsGraffiti CMSnopCommerce. Open Source online shop e-commerce solution.Facebook Developer ToolkitRawrpatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesShweet: SharePoint 2010 Team Messaging built with PexFarseer Physics EngineNcqrs Framework - The CQRS framework for .NETIonics Isapi Rewrite Filter

    Read the article

  • My Thoughts On the Xbox 180

    - by Chris Gardner
    Originally posted on: http://geekswithblogs.net/freestylecoding/archive/2013/06/21/my-thoughts-on-the-xbox-180.aspx Everyone seems to be putting their 0.00237 cents into the wishing well over Microsoft's recent decision to reverse the DRM policy on the Xbox One. However, there have been a few issues that nobody has touched. As such, I have decided to dig 0.00237 cents out of my pocket. First, let me be clear about this point. I do not support the decision to reverse the DRM policy on the Xbox One. I wanted that point to be expressed first and unambiguously. I will say it again. I do not support the decision to reverse the DRM policy on the Xbox One. Now that I have that out of the way, let me go into my rationale. This decision removes most of the cool features that enticed me to pre-order the console. No, I didn't cancel my pre-order. There is still five months before the release of the console, and there is still a plethora of information that we, as consumers, do not have. With that, it should be noted that much of the talk in this post is speculation and rhetoric. I do not have any insider information that you do not possess. The persistent connection would have allowed the console to do many of the functions for which we have been begging. That demo where someone was playing Ryse, seamlessly accepted a multiplayer challenge in Killer Instinct, played the match (and a rematch,) and then jumped back into Ryse. That's gone, if you bought the game on disc. The new, DRM free system will require the disc in the system to play a game. That bullet point where one Xbox Live account could have up to 10 slave accounts so families could play together, no matter where they were located. That's gone as well. The promise of huge, expansive, dynamically changing worlds that was brought to us with the power of cloud computing. Well, "the people" didn't want there to be a forced, persistent connection. As such, developers can't rely on a connection and, as such, that feature is gone. This is akin to the removal of the hard drive on the Xbox 360. The list continues, but the enthusiast press has enumerated the list far better than I wish. All of this is because the Xbox team saw the HUGE success of Steam and decided to borrow a few ideas. Yes, Steam. The service that everyone hated for the first six months (for the same reasons the Xbox One is getting flack.) There was an initial growing pain. However, it is now lauded as the way games distribution should be handled. Unless you are Microsoft. I do find it curious that many of the features were originally announced for the PS4 during its unveiling. However, much of that was left strangely absent for Sony's E3 press conference. Instead, we received a single, static slide that basically said the exact opposite of Microsoft's plans. It is not farfetched to believe that slide came into existence during the approximately seven hours between the two media briefings. The thing that majorly annoys me over this whole kerfuffle is that the single thing that caused the call to arms is, really, not an issue. Microsoft never said they were going to block used sales. They said it was up to the publisher to make that decision. This would have allowed publishers to reclaim some of the costs of development in subsequent sales of the product. If you sell your game to GameStop for 7 USD, GameStop is going to sell it for 55 USD. That is 48 USD pure profit for them. Some publishers asked GameStop for a small cut. Was this a huge, money grubbing scheme? Well, yes, but the idea was that they have to handle server infrastructure for dormant accounts, etc. Of course, GameStop flatly refused, and the Online Pass was born. Fortunately, this trend didn’t last, and most publishers have stopped the practice. The ability to sell "licenses" has already begun to be challenged. Are you living in the EU? If so, companies must allow you to sell digital property. With this precedent in place, it's only a matter of time before other areas follow suit. If GameStop were smart, they should have immediately contacted every publisher out there to get the rights to become a clearing house for these licenses. Then, they keep their business model and could reduce their brick and mortar footprint. The digital landscape is changing. We need to not block this process. As Seth MacFarlane best said "Some issues are so important that you should drag people kicking and screaming." I believe this was said on an episode of Real Time with Bill Maher about the issue of Gay Marriages. Much like the original source, this is an issue that we need to drag people to the correct, progressive position. Microsoft, as a company, actually has the resources to weather the transition period. They have a great pool of first and second party developers that can leverage this new framework to prove the validity. Over time, the third party developers will get excited to use these tools. As an old C++ guy, I resisted C# for years. Now, I think it's one of the best languages I've ever used. I have a server room and a Co-Lo full of servers, so I originally didn't see the value in Azure. Now, I wish I could move every one of my projects into the cloud. I still LOVE getting physical packaging, which my music and games collection will proudly attest. However, I have started to see the value in pure digital, and have found ways to integrate this into the ways I consume those products. I can, honestly, understand how some parts of the population would be very apprehensive about this new landscape. There were valid arguments about people with no internet access. There are ways to combat these problems. These methods do not require us to throw the baby out with the bathwater. However, the number of people in the computer industry that I have seen cry foul is truly appalling. We are the forward looking people that help show how technology can improve people's lives. If we can't see the value of the brief pain involved with an exciting new ecosystem, than who will?

    Read the article

  • MIX 2010 Covert Operations Day 2 Silverlight + Windows 7 Phone

    - by GeekAgilistMercenary
    Left the Circus Circus and headed to the geek circus at Mandalay Bay.  Got in, got some breakfast, met a few more people and headed to the keynote. Upon arriving the crew I was hanging with at the event; Erik Mork, Beth Murray, and Brian Henderson and I were entertained with several other thousand geeks by the wicked yo-yoing. The first video demo of something was of Bing Maps and various aspects of Microsoft Research integrated together.  Namely the pictures, put in place, on real 3d element maps of various environments. Silverlight Scott Guthrie, as one would guess, kicked off the keynote.  His first point was that user experience has become a priority at Microsoft.  This can be seen by any observant soul with the release and push of Expression, Silverlight, and the other tools.  This is even more apparent when one takes note of Microsoft bringing in people that can actually do good design and putting them at the forefront. The next thing Scott brought up was a few key points about Silverlight.  Currently Silverlight is a little over 2 years old and has achieved a pretty solid 60% penetration.  Silverlight has all sorts of capabilities that have been developed and are now provided as open source including;  ad injection, smoothing, playback editing, and more.  Another thing he showed, which really struck me as awesome being in the analytics space, was the Olympics and a quick glimpse of the ad statistics, viewer experience, video playback performance, audience trends, and overall viewer participation.  All of it rendered in Silverlight in beautiful detail. The key piece of Scott's various points were all punctuated with the fact that all of this code is available as open source.  Not only is Microsoft really delving into this design element of things, they're getting involved in the right ways. One of the last points I'll bring up about Silverlight 4 is the ability to have HD video on a monitor, and an entirely different activity being done on the other monitor, effectively making Silverlight the only RIA framework that supports multi-monitor support.  Overall, Silverlight is continuing to impress – providing superior capabilities tit-for-tat with the competition. Windows 7 Phone The Windows 7 Phone has 3 primary buttons (yes, more than the iPhone, don't let your mind explode!!).  Start, Search, and Back control all of the needed functionality of the phone.  At the same time, of course, there is the multi-touch, touch, and other interactive abilities of the interface.  The intent, once start is pressed is to have all the information that a phone owner wants displayed immediately.  Avoiding the scrolling through pages of apps or rolling a ball to get through multitudes of other non-interactive phone interfaces.  The Windows 7 Phone simply has the data right in front of you, basically a phone dashboard.  From there it is easy to dive into the interactive areas of the phone. Each area of the interface of the phone is broken into hubs.  These hubs include applications, data, and other things based on a relative basis.  This basis being determined by the user.  These applications interact on many other levels, and form a kind of relationship between each other adding more and more meta-data to the phone user, their interactions between the applications, and of course the social element of their interactions on the phone.  This makes this phone a practical must have for a marketer involved in social media.  The level of wired together interaction is massive, and of course, if you've seen Office Outlook 2010 you know that the power that is pulled into the phone by being tied to Outlook is massive. Joe Belfiore also showed several UI & specifically UX elements of the phone interface that allows paging to be instinctual by simple clipped items, flipping page to page, and other excellent user experience advances for phone devices.  Belfiore's also showed how his people hub had a massive list of people, with pictures, all from various different social networks and other associated relations.  The rendering, speed, and viewing of these people's, their pictures, their social network information, and other characteristics was smooth and in some situations unbelievably rendered.  This demo showed some of the great power of the beta phone, which isn't even as powerful as the planned end device. Joe finished up by jumping into the music, videos, and other media with the Zune Component of the Windows 7 Mobile Phone.  This was all good stuff, but I'll get to what really sold me on the media element in a moment. When Joe was done, Scott Guthrie stepped back up to walk through building a Windows 7 Mobile Phone.  This is were I have to give serious props.  He built this application, in Visual Studio 2010, in front of 2000+ people.  That was cool, but what really was amazing that he build the application in about 2 minutes.  The IDE, side by side design that is standard in Visual Studio is light years ahead of x-Code or any of the iPhone IDEs.  The Windows 7 Mobile System, if it can get market penetration, poses a technologically superior development and phone platform over anything on the market right now.  The biggest problem with the phone, is it just isn't available yet.  I personally can't wait for a chance to build some apps for the new Windows Phone. Netflix, I May Start Up an Account Again! When I get my Windows 7 Phone device, I am absolutely getting a Netflix account again.  The Vertigo crew, as I wrote on Twitter "#MIX10 Props @seesharp on @netflix demo", displayed an application on the phone for Netflix that actually ran HD Video of Rescue Me (with Dennis Leary).  The video played back smooth as it would on a dedicated computer, I was instantly sold.  So this didn't actually sell me on the phone, because I'm already sold, but it did sell me whole heartedly on the media capabilities of the pending phone. Anyway, I try not to do this but I may double post today.  Lunch is over and I'm off to another session very near and dear to the heart of my occupation, Analytics Tracking.  Stay tuned and I should have that post up by the end of the day. Original Post – Check out my other blog for even more technical ramblings and reads.

    Read the article

  • Using Sitecore RenderingContext Parameters as MVC controller action arguments

    - by Kyle Burns
    I have been working with the Technical Preview of Sitecore 6.6 on a project and have been for the most part happy with the way that Sitecore (which truly is an MVC implementation unto itself) has been expanded to support ASP.NET MVC. That said, getting up to speed with the combined platform has not been entirely without stumbles and today I want to share one area where Sitecore could have really made things shine from the "it just works" perspective. A couple days ago I was asked by a colleague about the usage of the "Parameters" field that is defined on Sitecore's Controller Rendering data template. Based on the standard way that Sitecore handles a field named Parameters, I was able to deduce that the field expected key/value pairs separated by the "&" character, but beyond that I wasn't sure and didn't see anything from a documentation perspective to guide me, so it was time to dig and find out where the data in the field was made available. My first thought was that it would be really nice if Sitecore handled the parameters in this field consistently with the way that ASP.NET MVC handles the various parameter collections on the HttpRequest object and automatically maps them to parameters of the action method executing. Being the hopeful sort, I configured a name/value pair on one of my renderings, added a parameter with matching name to the controller action and fired up the bugger to see... that the parameter was not populated. Having established that the field's value was not going to be presented to me the way that I had hoped it would, the next assumption that I would work on was that Sitecore would handle this field similar to how they handle other similar data and would plug it into some ambient object that I could reference from within the controller method. After a considerable amount of guessing, testing, and cracking code open with Redgate's Reflector (a must-have companion to Sitecore documentation), I found that the most direct way to access the parameter was through the ambient RenderingContext object using code similar to: string myArgument = string.Empty; var rc = Sitecore.Mvc.Presentation.RenderingContext.CurrentOrNull; if (rc != null) {     var parms = rc.Rendering.Parameters;     myArgument = parms["myArgument"]; } At this point, we know how this field is used out of the box from Sitecore and can provide information from Sitecore's Content Editor that will be available when the controller action is executing, but it feels a little dirty. In order to properly test the action method I would have to do a lot of setup work and possible use an isolation framework such as Pex and Moles to get at a value that my action method is dependent upon. Notice I said that my method is dependent upon the value but in order to meet that dependency I've accepted another dependency upon Sitecore's RenderingContext.  I'm a big believer in, when possible, ensuring that any piece of code explicitly advertises dependencies using the method signature, so I found myself still wanting this to work the same as if the parameters were in the request route, querystring, or form by being able to add a myArgument parameter to the action method and have this parameter populated by the framework. Lucky for us, the ASP.NET MVC framework is extremely flexible and provides some easy to grok and use extensibility points. ASP.NET MVC is able to provide information from the request as input parameters to controller actions because it uses objects which implement an interface called IValueProvider and have been registered to service the application. The most basic statement of responsibility for an IValueProvider implementation is "I know about some data which is indexed by key. If you hand me the key for a piece of data that I know about I give you that data". When preparing to invoke a controller action, the framework queries registered IValueProvider implementations with the name of each method argument to see if the ValueProvider can supply a value for the parameter. (the rest of this post will assume you're working along and make a lot more sense if you do) Let's pull Sitecore out of the equation for a second to simplify things and create an extremely simple IValueProvider implementation. For this example, I first create a new ASP.NET MVC3 project in Visual Studio, selecting "Internet Application" and otherwise taking defaults (I'm assuming that anyone reading this far in the post either already knows how to do this or will need to take a quick run through one of the many available basic MVC tutorials such as the MVC Music Store). Once the new project is created, go to the Index action of HomeController.  This action sets a Message property on the ViewBag to "Welcome to ASP.NET MVC!" and invokes the View, which has been coded to display the Message. For our example, we will remove the hard coded message from this controller (although we'll leave it just as hard coded somewhere else - this is sample code). For the first step in our exercise, add a string parameter to the Index action method called welcomeMessage and use the value of this argument to set the ViewBag.Message property. The updated Index action should look like: public ActionResult Index(string welcomeMessage) {     ViewBag.Message = welcomeMessage;     return View(); } This represents the entirety of the change that you will make to either the controller or view.  If you run the application now, the home page will display and no message will be presented to the user because no value was supplied to the Action method. Let's now write a ValueProvider to ensure this parameter gets populated. We'll start by creating a new class called StaticValueProvider. When the class is created, we'll update the using statements to ensure that they include the following: using System.Collections.Specialized; using System.Globalization; using System.Web.Mvc; With the appropriate using statements in place, we'll update the StaticValueProvider class to implement the IValueProvider interface. The System.Web.Mvc library already contains a pretty flexible dictionary-like implementation called NameValueCollectionValueProvider, so we'll just wrap that and let it do most of the real work for us. The completed class looks like: public class StaticValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider;     public StaticValueProvider(ControllerContext controllerContext)     {         var parameters = new NameValueCollection();         parameters.Add("welcomeMessage", "Hello from the value provider!");         _wrappedProvider = new NameValueCollectionValueProvider(parameters, CultureInfo.InvariantCulture);     }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } Notice that the only entry in the collection matches the name of the argument to our HomeController's Index action.  This is the important "secret sauce" that will make things work. We've got our new value provider now, but that's not quite enough to be finished. Mvc obtains IValueProvider instances using factories that are registered when the application starts up. These factories extend the abstract ValueProviderFactory class by initializing and returning the appropriate implementation of IValueProvider from the GetValueProvider method. While I wouldn't do so in production code, for the sake of this example, I'm going to add the following class definition within the StaticValueProvider.cs source file: public class StaticValueProviderFactory : ValueProviderFactory {     public override IValueProvider GetValueProvider(ControllerContext controllerContext)     {         return new StaticValueProvider(controllerContext);     } } Now that we have a factory, we can register it by adding the following line to the end of the Application_Start method in Global.asax.cs: ValueProviderFactories.Factories.Add(new StaticValueProviderFactory()); If you've done everything right to this point, you should be able to run the application and be presented with the home page reading "Hello from the value provider!". Now that you have the basics of the IValueProvider down, you have everything you need to enhance your Sitecore MVC implementation by adding an IValueProvider that exposes values from the ambient RenderingContext's Parameters property. I'll provide the code for the IValueProvider implementation (which should look VERY familiar) and you can use the work we've already done as a reference to create and register the factory: public class RenderingContextValueProvider : IValueProvider {     private NameValueCollectionValueProvider _wrappedProvider = null;     public RenderingContextValueProvider(ControllerContext controllerContext)     {         var collection = new NameValueCollection();         var rc = RenderingContext.CurrentOrNull;         if (rc != null && rc.Rendering != null)         {             foreach(var parameter in rc.Rendering.Parameters)             {                 collection.Add(parameter.Key, parameter.Value);             }         }         _wrappedProvider = new NameValueCollectionValueProvider(collection, CultureInfo.InvariantCulture);         }     public bool ContainsPrefix(string prefix)     {         return _wrappedProvider.ContainsPrefix(prefix);     }     public ValueProviderResult GetValue(string key)     {         return _wrappedProvider.GetValue(key);     } } In this post I've discussed the MVC IValueProvider used to map data to controller action method arguments and how this can be integrated into your Sitecore 6.6 MVC solution.

    Read the article

  • Top 10 Browser Productivity Tips

    - by Renso
    Originally posted on: http://geekswithblogs.net/renso/archive/2013/10/14/top-10-browser-productivity-tips.aspxYou don’t have to be a geek to be a productive browser user. The tips below have been selected by actions users take most of the time to navigate a web-site but use long-standing keyboard or mouse actions to get them done, when there are keyboard short-cuts you can use instead. Since you hands are already on the keyboard it is almost always faster to sue a keyboard shortcut to get something done that you usually used the mouse for. For example right-clicking on something to copy it and then doing to same for pasting something is very time consuming, keyboard shortcuts have been created that simplify the task. All it takes are a few memory brain cells to remember them. Here are the tips, in no particular order:   Tip 1 Hold down the spacebar on your keyboard to page to the end of your web page rather than using your mouse. This is really a slow way of doing it. If you want to page one page at a time, hit the spacebar once, and again to page again. But if you want to page all the way to the end of the web page simply hit Ctrl+End (that is hold down the Ctrl key and hit the End button on your keyboard). To get to the top of your web page, simply hit Ctrl + Home to go all the way to the top of your web page. Tip 2 Where are my downloads? Some folks run downloads again-and-again because they do not know where the last one went and they do not see the popup, or browser note on their web page in the footer, etc. Simply hit Ctrl+J. Works in most browsers. Tip 3 Selecting a US state from a drop down box. Don’t use the mouse, takes just way too long to scroll. When you tab to the drop down box or click on it with your mouse, simply hit the first character of the state and it will be selected. For Texas for example hit the letter “T” twice on your keyboard to get to it. The same concept can be applied to any drop down box that is alphabetical or numerically sorted. Tip 4 Fixing spelling errors. All modern-day browsers support this now. You see the red wavy lines underscoring a word, yes it is a spelling error. How do you fix it? Don’t overtype it or try and fix it manually, fist right-click on it and a list of suggestions comes up. If it does not show up, like my name “Renso” and you know how to spell your name as in this example, look further down the list of options (the little window popup that appears when you right click) and you should see an option to “Add to Dictionary”. Be warned, when you add it, it only adds it to the browser you’re using’s dictionary. If you use Google Chrome, Firefox and IE, each one will have their own list. Tip 5 So you have trouble seeing the text on the screen. Or you are looking at a photo, for example in Facebook. You want to zoom in to read better or zoom into a photo a bit more. Hit Ctrl++ (hold down Ctrl key and hit the plus key – actually it’s the equal key but it is easier to remember that it is plus for bigger). Hit the minus to zoom out. Now you can’t remember what the original size was since you were so excited to hit it 20 times, or was that 21… Simply hit Ctrl+0 (that is zero) and it will reset it to the default. Tip 6 So you closed a couple of tabs in your browser. Suddenly you remember something you wanted to double-check something on one of the tabs, you cannot remember the URL ad the tab is gone forever, or is it? Simply hit Ctrl+Shift+t and it will bring back your tabs one by one each time you click the T. This has also been a great way for me to quickly close some tabs because I don’t want my boss to see I’m shopping and then hitting Ctrl+Shift+t to quickly get it back and complete my check-put and purchase. Or, for parents, when you walk into your daughter’s room and you see she quickly clicks and closes a window/tab in here browser. Not to worry my little darling, daddy will Ctrl+Shift+t and see what boys on Facebook you were talking too… Tip 7 The web browser is frozen on your PC/Laptop/Whatever, in this example it may be your Internet Explorer browser. I don’t mention Firefox or Chrome here because it probably never happens in their world. You cannot close it, it won’t respond to anything you have done s far except for the next step you are about to take, which is throw your two-day old coffee on your keyboard. This happens especially on sites that want to force you to complete a purchase order. Hit Ctrl+Alt+Del on your keyboard on any version of windows, select TASK MANAGER. In the  First Tab, which is the Process Tab, look for the item in question. In this example you should see Internet Explorer. Right-click it and select “End Task”. It will force the thread out of memory and terminate that process. You can of course do this with any program running under your account. Tip 8 This is a personal favorite of mine. To select words in the paragraph without using the mouse. You don’t want to select one character at a time like when you use the Ctrl+arrows as it can be very slow if you want to select a lot of text. You also want to select whole words. Simply use the Ctrl+Shift_arrow (right or left depending which direction you want to go. Tip 9 I was a bit reluctant to add this one, but being in the professional services industry still come across many-a-folk that simply can’t copy-and-paste them-all text or images that reside on them screens, y’all. Ctrl+c to copy and Ctrl+v to paste it. Works a lot faster than using the mouse. You may be asking: “Well why in the devil did they not use Ctrl+p for paste…. because that is for printing. This is of course not limited to the browser world, it applies to almost any piece of software running on PC or Mac. Go try it on an image on your browser, right-click it and select copy. Open a word document and Ctrl+v to paste the image in there. Please consider copyright laws. Tip 10 Getting rid of annoying ads. Now this only works when you load a web page, meaning when you get back to the same page later you will have to do this again and you will need to learn a tool to do it, WELL WORTH IT. For example, I use GrooveShark to listen to music but I don’t like the ads they show. Install a tool like Firebug for Firefox or use the Ctrl+Shift+I on Chrome to bring up the developer toolbar. Shows at the bottom of the page. With Firefox, once you have installed Firebug as an add-on, a yellow bug should appear on the top right-hand-side of your browser, click on it to display the developer toolbar. You will need to learn how to use it, but once you know how to select an item/section on the window (usually just right-click the add you don’t want to see and select “Inspect Element”, the developer toolbar will appear (if not already there)) and then simply hit delete and it will remove the add from the screen. If you don’t know HTML you may need to play with it a bit, but once you understand how it works can open up a whole new world for you on how web pages actually work. If you can think of any others that have saved you a ton of time please let me know so I can add them to a top 99 list.

    Read the article

  • Goodbye my beloved Nexus One, hello Windows Phone 7

    - by George Clingerman
    Last night my wife’s Nexus One finally bit the dust. You may not know but I’ve been nursing her Nexus One one along for quite a while after her screen shattered. I was able to replace it on my own (go me!) but little quirks have been popping up and the phone was quickly deteriorating. Lately it’s been the power button. Wifey would often have to press the power button several times to get her phone to turn on and last night it just wouldn’t wake up again. I took it apart and tried my best to see if I could somehow make it live once again but no luck this time. It was finally ready to retire. We looked at first for a replacement phone for her but she wasn’t really seeing anything she liked. So I decided to make the ultimate sacrifice and offer up my much loved Nexus One and I would then get a new Windows Phone 7 device. I love T-Mobile for my service so my choices were immediately limited to basically just a single phone. The HTC HD7. I read reviews and they were all over the board from people loving to people hating the phone but I decided, hey, why not, let’s take this plunge. And I did. I’ve only had the phone for about two days now so below is my list of first reaction pros/cons. These are basically things I’ve missed or things I’ve noticed that I really like about my new Windows Phone. Cons: * No Google Talk – I used this a LOT on my Nexus. I’ve found an application called “Flory” but it’s just an ok substitute, not the same as the full featured GTalk I had on my Nexus. * Seesmic is limited– I loved the way Seesmic worked on my Nexus. It was my mobile twitter client of choice. Everything about it worked really well. On Windows Phone 7 it’s just ok. I don’t get notification of new tweets, it’s several clicks to even see a new tweet. It’s definitely got some more development before it has the same features as it did on my Nexus. * Buttons don’t give great feedback – I’d read this on the reviews about the HTC HD7 and I’m finding it true myself. Pressing the buttons on the side of the phone and the power button on the top is finicky and I have to be looking at my phone to make sure I actually got them to press. * Web browsing is slow – I’m not sure what’s up with this, I’m connected to my wireless network at my house but it’s noticeably slower on my WP7 device than my Nexus. I even switched back to verify and it’s definitely true. Retrieving tweets, hitting up the XNA forums and just general web activities are all much slower on my WP7. I can’t think of any reason this would be true but it almost seems like it’s not using my wireless for everything.   Pros: * It’s pretty – the phone is really gorgeous. I loved the form of my Nexus One by the HTC HD7 is just as pretty, maybe even prettier! It’s got a nice large, bright screen. It feels good in my hand. And it even has a little kickstand to set the phone up for movie watching. Definitely a gorgeous phone. * LIVE integration – I lost a lot of nice integration with Google services but I gained a lot of integration with LIVE services that I also use. Now I can see when I get new GMail messages AND Hotmail messages. And having the Xbox LIVE integration is admittedly cool as well. * Tile notification rock – The Windows Phone 7 commercials are TRYING to get this message out but they’re doing a really poor job of this. Tile notifications really do save you from your phone. I have a whole little mini-informational dashboard at a glance. I unlock my phone and at a glace I can see new IMs, new mail messages, software updates etc. All just letting me know in the tiles I have arranged. That’s pretty cool. * The interface works really well – I feel super hip and cool swiping and sliding things around on my Windows Phone 7. Everything works that way and it’s great and fast and really good looking. I’m all about me feeling cool. * I’m gaming more – I had gotten a few games on my Nexus One but there really weren’t a lot of good developers flocking to the service. Just browsing through the Windows Phone 7 marketplace I’m already seeing a ton of games I want to try and buy. And I sat down and bet Pixel Man 0 just yesterday on my phone. I’m already gaming more than I did on my Nexus One. * Netflix integration is fantastic - It works just like it does on my Xbox 360 and I love having this feature on my phone. * It’s basically a Zune – I’ve been taking my Zune to work and listening to music off of that while I code. I no longer need to take it with me, now I just sync songs onto my phone and it’s my new Zune. I freaking love that. One less device to carry around.   All in all my cons have really little to do with the phone (just the buttons and the web browsing) and more to do with the applications needing to catch up a bit to what I’m used to. And the Pros are things that ARE phone specific so I’m seeing that as a good sign that I’m going to be very happy with my Windows Phone 7. So Wifey is happy having her Nexus One again, I’m happy with my new Windows Phone 7. Life is good. Now I just need to make a game to pay for it….

    Read the article

  • Kubuntu 12.04 - Touchpad and keyboard stopped working at random

    - by StepTNT
    As in the title, I've got this problem with my Kubuntu 12.04. At first I've thought that the whole system was hung, but it happened again 5 minutes ago and, while the keyboard and the touchpad stopped working, the music was still playing, so I guess that's just an "input" problem, because the system was still working! Any solution? Is there some data that you need to know about my setup? EDIT: Added my lshw outout description: Notebook product: N53SV () vendor: ASUSTeK Computer Inc. version: 1.0 serial: B2N0AS17695408A width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=N uuid=8083F2DA-A43E-E081-3F3F-BCAEC55F8AA1 *-core description: Motherboard product: N53SV vendor: ASUSTeK Computer Inc. physical id: 0 version: 1.0 serial: BSN12345678901234567 slot: MIDDLE *-firmware description: BIOS vendor: American Megatrends Inc. physical id: 0 version: N53SV.214 date: 08/10/2011 size: 64KiB capacity: 2496KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb smartbattery biosbootspecification *-cpu description: CPU product: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz vendor: Intel Corp. physical id: 4 bus info: cpu@0 version: Intel(R) Core(TM) i7-2630QM CPU @ 2.00GHz serial: To Be Filled By O.E.M. slot: CPU 1 size: 800MHz capacity: 4GHz width: 64 bits clock: 100MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic popcnt tsc_deadline_timer xsave avx lahf_lm ida arat epb xsaveopt pln pts tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=1 threads=2 *-cache description: L1 cache physical id: 5 slot: L1-Cache size: 32KiB capacity: 32KiB capabilities: internal write-back instruction *-memory description: System Memory physical id: 40 slot: System board or motherboard size: 10GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: 99U5428-040.A00LF vendor: Kingston physical id: 0 serial: 103C28C3 slot: ChannelA-DIMM0 size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 1 serial: 58383D1F slot: ChannelA-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 2 serial: 58183D19 slot: ChannelB-DIMM0 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0,8 ns) product: HMT325S6BFR8C-H9 vendor: Hynix/Hyundai physical id: 3 serial: 58183C8F slot: ChannelB-DIMM1 size: 2GiB width: 64 bits clock: 1333MHz (0.8ns) *-pci description: Host bridge product: 2nd Generation Core Processor Family DRAM Controller vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 09 width: 32 bits clock: 33MHz configuration: driver=agpgart-intel resources: irq:0 *-pci:0 description: PCI bridge product: Xeon E3-1200/2nd Generation Core Processor Family PCI Express Root Port vendor: Intel Corporation physical id: 1 bus info: pci@0000:00:01.0 version: 09 width: 32 bits clock: 33MHz capabilities: pci pm msi pciexpress normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:40 ioport:d000(size=4096) memory:db000000-dc0fffff ioport:c0000000(size=301989888) *-generic UNCLAIMED description: Unassigned class product: Illegal Vendor ID vendor: Illegal Vendor ID physical id: 0 bus info: pci@0000:01:00.0 version: ff width: 32 bits clock: 66MHz capabilities: bus_master vga_palette cap_list configuration: latency=255 maxlatency=255 mingnt=255 resources: memory:db000000-dbffffff memory:c0000000-cfffffff memory:d0000000-d1ffffff ioport:d000(size=128) memory:dc000000-dc07ffff *-display description: VGA compatible controller product: 2nd Generation Core Processor Family Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 09 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:47 memory:dc400000-dc7fffff memory:b0000000-bfffffff ioport:e000(size=64) *-communication description: Communication controller product: 6 Series/C200 Series Chipset Family MEI Controller #1 vendor: Intel Corporation physical id: 16 bus info: pci@0000:00:16.0 version: 04 width: 64 bits clock: 33MHz capabilities: pm msi bus_master cap_list configuration: driver=mei latency=0 resources: irq:48 memory:df00b000-df00b00f *-usb:0 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 vendor: Intel Corporation physical id: 1a bus info: pci@0000:00:1a.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:16 memory:df008000-df0083ff *-multimedia description: Audio device product: 6 Series/C200 Series Chipset Family High Definition Audio Controller vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:49 memory:df000000-df003fff *-pci:1 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:41 ioport:c000(size=4096) memory:de600000-deffffff ioport:d4200000(size=10485760) *-pci:2 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:42 ioport:b000(size=4096) memory:ddc00000-de5fffff ioport:d3700000(size=10485760) *-network description: Wireless interface product: AR9285 Wireless Network Adapter (PCI-Express) vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 01 serial: 48:5d:60:f2:2c:fd width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=ath9k driverversion=3.2.0-24-generic firmware=N/A ip=192.168.1.6 latency=0 link=yes multicast=yes wireless=IEEE 802.11bgn resources: irq:17 memory:ddc00000-ddc0ffff *-pci:3 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 4 vendor: Intel Corporation physical id: 1c.3 bus info: pci@0000:00:1c.3 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:43 ioport:a000(size=4096) memory:dd200000-ddbfffff ioport:d2c00000(size=10485760) *-usb description: USB controller product: FL1000G USB 3.0 Host Controller vendor: Fresco Logic physical id: 0 bus info: pci@0000:04:00.0 version: 04 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:19 memory:dd200000-dd20ffff *-pci:4 description: PCI bridge product: 6 Series/C200 Series Chipset Family PCI Express Root Port 6 vendor: Intel Corporation physical id: 1c.5 bus info: pci@0000:00:1c.5 version: b5 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:44 ioport:9000(size=4096) memory:dc800000-dd1fffff ioport:d2100000(size=10485760) *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:05:00.0 logical name: eth0 version: 06 serial: bc:ae:c5:5f:8a:a1 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl_nic/rtl8168e-2.fw latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:46 ioport:9000(size=256) memory:d2104000-d2104fff memory:d2100000-d2103fff *-usb:1 description: USB controller product: 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:23 memory:df007000-df0073ff *-isa description: ISA bridge product: HM65 Express Chipset Family LPC Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: SATA controller product: 6 Series/C200 Series Chipset Family 6 port SATA AHCI Controller vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 logical name: scsi2 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm ahci_1.0 bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:e0b0(size=8) ioport:e0a0(size=4) ioport:e090(size=8) ioport:e080(size=4) ioport:e060(size=32) memory:df006000-df0067ff *-disk description: ATA Disk product: ST9750420AS vendor: Seagate physical id: 0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 0002 serial: 5WS0A7QR size: 698GiB (750GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=e0c5913d *-volume:0 description: Windows FAT volume vendor: MSDOS5.0 physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 version: FAT32 serial: 4ce5-3acb size: 3004MiB capacity: 3004MiB capabilities: primary fat initialized configuration: FATs=2 filesystem=fat *-volume:1 description: EXT4 volume vendor: Linux physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 logical name: / version: 1.0 serial: c198cc2a-d86a-4460-a4d5-3fc0b21e439c size: 28GiB capacity: 28GiB capabilities: primary journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-03-15 16:53:54 filesystem=ext4 lastmountpoint=/ modified=2012-05-02 18:52:04 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,acl,barrier=1,data=ordered mounted=2012-05-09 19:06:01 state=mounted *-volume:2 description: Windows NTFS volume physical id: 3 bus info: scsi@0:0.0.0,3 logical name: /dev/sda3 version: 3.1 serial: 4c1cdebc-ec09-2947-a3b5-c1f9f1cddc1c size: 152GiB capacity: 152GiB capabilities: primary bootable ntfs initialized configuration: clustersize=4096 created=2011-02-22 16:02:47 filesystem=ntfs label=OS state=clean *-volume:3 description: Extended partition physical id: 4 bus info: scsi@0:0.0.0,4 logical name: /dev/sda4 size: 514GiB capacity: 514GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume:0 description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 10GiB capabilities: nofs *-logicalvolume:1 description: HPFS/NTFS partition physical id: 6 logical name: /dev/sda6 capacity: 504GiB *-cdrom description: DVD-RAM writer product: BD-MLT UJ240AS vendor: MATSHITA physical id: 1 bus info: scsi@2:0.0.0 logical name: /dev/cdrom logical name: /dev/cdrw logical name: /dev/dvd logical name: /dev/dvdrw logical name: /dev/sr0 version: 1.00 capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram configuration: ansiversion=5 status=nodisc *-serial UNCLAIMED description: SMBus product: 6 Series/C200 Series Chipset Family SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:df005000-df0050ff ioport:e040(size=32)

    Read the article

  • Three ways to upload/post/convert iMovie to YouTube

    - by user44251
    For Mac users, iMovie is probably a convenient tool for making, editing their own home movies so as to upload to YouTube for sharing with more people. However, uploading iMovie files to YouTube can't be always a smooth run, I did notice many people complaining about it. This article is delivered for guiding those who are haunted by the nightmare by providing three common ways to upload iMovie files to YouTube. YouTube and iMovie YouTube is the most popular video sharing website for users to upload, share and view videos. It empowers anyone with an Internet connection the ability to upload video clips and share them with friends, family and the world. Users are invited to leave comments, pick favourites, send messages to each other and watch videos sorted into subjects and channels. YouTube accepts videos uploaded in most container formats, including WMV (Windows Media Video), 3GP (Cell Phones), AVI (Windows), MOV (Mac), MP4 (iPod/PSP), FLV (Adobe Flash), MKV (H.264). These include video codecs such as MP4, MPEG and WMV. iMovie is a common video editing software application comes with every Mac for users to edit their own home movies. It imports video footage to the Mac using either the Firewire interface on most MiniDV format digital video cameras, the USB port, or by importing the files from a hard drive where users can edit the video clips, add titles, and add music. Since 1999, eight versions of iMovie have been released by Apple, each with its own functions and characteristic, and each of them deal with videos in a way more or less different. But the most common formats handled with iMovie if specialty discarded as far as to my research are MOV, DV, HDV, MPEG-4. Three ways for successful upload iMovie files to YouTube Solution one and solution two suitable for those who are 100 certainty with their iMovie files which are fully compatible with YouTube. For smooth uploading, you are required to get a YouTube account first. Solution 1: Directly upload iMovie to YouTube Step 1: Launch iMovie, select the project you want to upload in YouTube. Step 2: Go to the file menu, click Share, select Export Movie Step 3: Specify the output file name and directory and then type the video type and video size. Solution 2: Post iMovie to YouTube straightly Step 1: Launch iMovie, choose the project you want to post in YouTube Step 2: From the Share menu, choose YouTube Step 3: In the pop-up YouTube windows, specify the name of your YouTube account, the password, choose the Category and fill in the description and tags of the project. Tick Make this movie more private on the bottom of the window, if possible, to limit those who can view the project. Click Next, and then click Publish. iMovie will automatically export and upload the movie to YouTube. Step 4: Click Tell a Friend to email friends and your family about your film. You are also allowed to copy the URL from Tell a Friend window and paste it into an email you created in your favourite email application if you like. Anyone you send to email to will be able to follow the URL directly to your movie. Note: Videos uploaded to YouTube are limited to ten minutes in length and a file size of 2GB. Solution 3: Upload to iMovie after conversion If neither of the above mentioned method works, there is still a third way to turn to. Sometimes, your iMovie files may not be recognized by YouTube due to the versions of iMovie (settings and functions may varies among versions), video itself (video format difference because of file extension, resolution, video size and length), compatibility (videos that are completely incompatible with YouTube). In this circumstance, the best and reliable method is to convert your iMovie files to YouTube accepted files, iMovie to YouTube converter will be inevitably the ideal choice. iMovie to YouTube converter is an elaborately designed tool for convert iMovie files to YouTube workable WMV, 3GP, AVI, MOV, MP4, FLV, MKV for smooth uploading with hard-to-believe conversion speed and second to none output quality. It can also convert between almost all popular popular file formats like AVI, WMV, MPG, MOV, VOB, DV, MP4, FLV, 3GP, RM, ASF, SWF, MP3, AAC, AC3, AIFF, AMR, WAV, WMA etc so as to put on various portable devices, import to video editing software or play on vast amount video players. iMovie to YouTube converter can also served as an excellent video editing tool to meet your specific program requirements. For example, you can cut your video files to a certain length, or split your video files to smaller ones and select the proper resolution suitable for demands of YouTube by Clip or Settings separately. Crop allows you to cut off unwanted black edges from your videos. Besides, you can also have a good command of the whole process or snapshot your favourite pictures from the preview window. More can be expected if you have a try.

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93  | Next Page >