Search Results

Search found 7455 results on 299 pages for 'power cable'.

Page 88/299 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• How can you convert audio (3.5mm) to S/PDIF?

  - by SSumner

  I have a monitor that I want to use as my 'TV' for my gaming system. I connect it via HDMI, so sound and video go through the monitor, but I want sound to my headphones, which travels via optical (S/PDIF) cable. The monitor (Dell U2713HM) has a 3.5mm audio jack on it for line out, but I couldn't find anything that simply plugs in an converts the analog audio signal to a digital one so I can plug in a S/PDIF cable. What sort of device do I need to do this? (I am not asking for shopping recommendations, merely what options allow this conversion. I would prefer the smallest option, as space is limited).

  Read the article

• Browsing is much slower on one PC wired to the same router - why?

  - by deanalt

  Wife is not happy. It takes about 5 seconds to open a google window, versus about 1 second on the faster computer which is about 3 years old itself. Yes, it is an older computer (5 -6 years old, I'd guess), surely with less RAM, but for simple browsing, should it matter? Both are hardwired to the same Netgear Rangemax router. Both use fixed IP addresses. Both are XP. Both have about 8 feet of cable to the router. I have the fastest service my cable provides. Probably irrelevant but ...two newer MACs are connected wirelessely during the summer and they are even faster, but I think that's the difference in browsers. If you could point me to a list of process of elimination steps that would be most appreciated. Thanks Dean

  Read the article

• Are all SATA cables compatible with SATA 3?

  - by Jim Fell

  I have a HP Compaq de5700 Small Form Factor desktop computer, and I am looking to upgrade it's hard drive. When I open up the box, it clearly has available SATA connectors on the motherboard, but no indication as to which SATA version (1, 2, or 3). The hard drive I am considering is a SATA 3. My concern is that if the motherboard also supports SATA 3 and I use an old SATA cable (v1 or v2), might there be problems? This is a bare drive, so I don't expect that a cable will come with it, and I have not been able to find the manual for this machine. Thanks.

  Read the article

• Can I mix CAT5 and CAT6?

  - by Jason94

  I'm thinking of upgrading the "backbone" of my network, taking a CAT6 cable from my router (DLINK DIR-655 (has cat6 ports)) to a gigabit swith in the tv rom (25m). I have two devices there that uses network (xbox and tvbox, both of them have cat5). Will my net be downgraded to 100mbit as max speed, or will I get 1 gigabit between my router and switch, and 100mbit between tvbox and xbox? From back in the days i have a tool to create my cat5 cable (the plug tool thingy), can I use this for my cat6 too?

  Read the article

• Windows 7 Line In Delay Issue [closed]

  - by CheeseConQueso

  Not sure if this question should be posted on a different stack exchange site, so if you find that it should not be posted here, please move it. Either way, if you know the solution, please advise. I'm running Windows 7 Pro 32-bit on my Dell Latitude 2100 netbook and I'm having an issue with the line in device/driver/functionality. The device & driver are stock: Driver Date: 7/13/2009 Driver Version: 6.1.7600.16385 I'm almost sure that the manufacturer of the sound card is RealTek. The problem is that there is a delay (when monitoring input) between the source and the speakers. My setup is bass guitar running through a 12' long instrument cable (1/4") with a 1/4" female to 1/8" male adapter into the line in port on the computer. Then the 15' long headphones/line out cable goes into a standard set of powered speakers. How do I get rid of this delay? Thanks for any help.

  Read the article

• No internet access on Windows 7 - part 2

  - by Vnuk

  This is a continuation of my previous question. The problems started when I turned on my wireless connection for the first time. Since then, every time I boot my Windows 7, my LAN connection does not have internet access. In my previous question, I got a key answer (route delete). Now my procedure to get LAN internet connectivity (local network works fine) when I boot looks like this: Power on WLAN Disconnect LAN cable Power off WLAN Execute route delete 0.0.0.0 if 11 Connect LAN cable Now my LAN connection has internet access. Another behavior that I can't explain - while my LAN connection has no internet access, Network and Sharing center refers to it as Unknown network, with a public icon. When I go through the fore mentioned procedure, it is referred to with my home WLAN network name, with status connected, and the Unknown network disappears.

  Read the article

• Can irssi ignore the 24h dsl-reconnect

  - by mcnesium

  A couple of weeks ago I had to switch my ISP from cable to DSL. Now I have this ridiculous disconnect and reconnect every 24h. It's no big deal insofar as having a new IP address every day, but for one exception. Since I host my irssi screen on a machine inside the LAN, my history gets affected by the reconnect in terms of a topic announcement, the users in each channel, creation date and so on. It's about 10 lines of redundant content every day. This is annoying especially in channels with very little traffic, because you hardly see the actual content in line with the every-day-junk. So I was wondering if I can tell irssi to silently ignore the reconnection details, so that my only meta-content in each channel goes back to "Day changed to ...", like back in the days of cable-internet.

  Read the article

• Setting up Multiple Routers (as Hardware Firewalls) behind a Home Router

  - by Synetech

  I’ve currently got one computer behind a router with built-in firewall functionality, connected to a home cable-modem that has a single Ethernet port and one IP. I’m going to have to set up another computer for the rest of the family to use which of course will need to be connected to the Internet, probably wirelessly since the modem is in my room and the new system would not be. What I would like to do is to get two more small routers with firewall capability and connect each computer to a router, which would in turn connect to the main router which connects to the cable-modem. That way, both systems have a hardware firewall protecting them (particularly the wireless system) and the burden of blocking would be reduced on both the computer CPUs and the main router because the secondary routers would handle some of the workload. I’m trying to find out about the complexities inherent in this design and how I could set it up to work, specifically the IP handling and NAT aspect. Thanks a lot.

  Read the article

• Changing Vim Home Directory

  - by mcaaltuntas

  Previously I've been using vim without any problems. However a few months ago our company made some network and security updates. After that whenever I plug a network cable into my laptop, it creates a network shared drive "H" with my company name and when I try to open vim it doesn't load plugins and other things that are in my vim home directory. I have found the reason but I don't know how to solve it. The problem is that these network updates changed our HOME directory. When I write: echo $HOME It prints H. Before plugging in a network cable my home was C:\Users\blabla. How can I change my HOME variable? When I run set it prints: C:\Windows\System32>set | findstr /R "^HOME" HOMEDRIVE=H: HOMEPATH=\ HOMESHARE=\\companyname\blabla\username$

  Read the article

• What is an Acer Converter Port?

  - by ShadowHero

  What is this port "Acer Converter Port"? Very little information can be found on the internet. It's basically the same as miniDP? Can I connect a monitor like Dell U2713H on this one? EDIT From this page: http://acer.custhelp.com/app/answers/detail/a_id/30837/~/frequently-asked-questions-on-the-aspire-r7-series 9. Can I connect a DisplayPort monitor to the Acer Converter Port? The Acer Converter Port uses the same physical port as a Mini DisplayPort, but is designed to connect to an Acer proprietary cable. If you connect a DisplayPort monitor, Acer cannot guarantee the functionality of the monitor. No damage should occur to either monitor or notebook by connecting a Mini DisplayPort cable. So, the question is, can someone confirm this will work for sure?

  Read the article

• Manually forcing TCP connection to retry

  - by Vi.

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without delays in GNU/Linux?

  Read the article

• problem on expand network using a router

  - by Jose

  I have a Netgear FS605 v3 router, and i'm trying to expand my network. The router is connected to the cable modem with cat5 cable. I have 2 laptop connected to the router but i'm only able to get internet connectivity in one. The first laptop i turn on, get the signal and the other one will show no connectivity. I have restarted all the devices many times but no luck. Can somebody explain me how to get this solved. Thanks.

  Read the article

• Monitor has yellow tint when used with the graphics card

  - by artknish

  I have an nVIDIA graphics card when used produces an yellow tint on my monitor's display. I tried with another monitor and it had the same issue. I then switched back to my motherboard's inbuilt graphics output (not sure what the technical term is), and the display seems fine, except I can't get the optimal resolution of 1440x900 to work. So is my graphics card's life over? Or can I get it repaired? Any self remedies without calling a hardware guy? Should I try with a DVI cable? I've been using the VGA cable from my graphics card to the monitor so far. Thanks for your suggestions!

  Read the article

• Manually forcing TCP connection to retry

  - by Vi

  I have a TCP connection (SSH session to some computer for example) Network suddenly goes down and drops all packets (disconnected cable, out of range). TCP resends packets again and again, retrying with increasing delays. I see the problem and plug the cable back (or restore network somehow). TCP connection finally successfully resends some packet and continues. The problem is that I need to wait for a some timeout on point 5. I want to use my opened SSH session now and not wait for 5-10 seconds until it finds out that connection is working again. How to force all TCP connections to resend data without now in GNU/Linux?

  Read the article

• parallel to usb driver windows 7 dot matrix printer

  - by user975234

  I recently built a new Core i5 system with Windows 7 Professional. I had planned to hook up my TVS MSP 250 XL printer using a USB to parallel cable Once I plug the cable in, Windows 7 recognizes it as an IEEE-1284 controller and automatically installs the appropriate driver. However, in the status window it reports the following: "USB Printing Support -- Ready to use" "No Printer Attached -- Ready to use" When I then go ahead and manually add the printer using the "virtual printer port for USB" I can add the printer seemingly without problem. Once finished, it appears in the Devices and Printers panel. Yet, all attempts to print on this printer fail. It appears that simply no data is sent to the printer (either by programs like word or adobe or by attempting to print a test page. Does anybody know how to fix this?

  Read the article

• ISP Couldn't Verify My HFC MAC Id

  - by Ann Rahn

  An Internet Service Provider whom I used in the past, claims to provide me with Internet service. However, when I gave his technician the Hybrid Fiber - COX MAC ID on my Modem, he could not find it on his list. Also, the Internet Service Provider doesn't even have my current mailing address. All he has is my phone number and he is demanding payment. On the other hand, I use a cable service which provide TV. At this point, the Internet Service Provider is threatening to disconnect my Internet service. My question: How can I verify if I am getting the service from him or through the cable?

  Read the article

• Serial Port ttyUSB0

  - by Alex

  I picked up a USB serial null modem cable, so that I can connect up to a headless linux box. As a quick test, I plugged the device into the usb null modem, and the other end I connected to a windows pc. I opened up a terminal on the windows side, with 115200 8N1. On the linux side I opened minicom with the same params. MY problem is that I can type one way from the pc and see the text on the linux minicom side. If I type on the linux side it doesnt show on the pc side. If I reverse the cable it reverses the process. I bet this is a simple issue but I haven't dealt with serial comms in ages. Thanks

  Read the article

• Dell eSATAp not working with some SATA disks

  - by pistache

  I have a Dell Inspiron XPS 15 (L502X) laptop, with an eSATAp port. I also have a Western Digital 1TB 3"5 SATA drive, that I'd like to use with the laptop. I bought a eSATAp <- SATA 22-pin cable (from Delock). When I use this cable my 3"5 HDD does NOT power up, no spin up. I thought that it's just this HDD taking too much power from the motherboard. However, I tested too with my 2"5 SATA HDD and it works successfully. Now the weird thing is that this 2"5 HDD takes 1.1A at 5V, and that the 3"5 HDD takes 0.7A at 5V. I don't understand why it can't work. Is there anything I could do for it to work ? What is really the problem ? Thanks for your help, Hugo

  Read the article

• What could be causing LVM errors on first boot after install in Debian?

  - by ianfuture

  Hi, I've installed Debian (lenny) on a machine at home. It was set up during install to have a /boot partition, then the rest was encrypted, then had an LVM ontop of that, then all the other partitons inside LVM. After install completed and on first boot it asked for password to un-encrypt(same password for both drives) then it showed an error which said LVM could not find a physical device with a particular UUID or something similar. LVM install is over two HDs. One is 120GB and one 40GB. 120GB is Master on its IDE cable and this has /boot on it. 40GB is slave on the other IDE cable. Is there anything that could be done to rescue this install? Or diagnose problem? It took ages to get installed due to time spent enrypting drives and I'd rather not go through that again. :( Thanks.. Ian

  Read the article

• Share laptop wifi with router

  - by obie

  I hi guys i'm trying to accomplish something: i have a modem (ADSL) which servers as a wireless router as well. There's a laptop connected to it through cable. On the other room i have a laptop which is connected through the router wirelessly. Now the problem is, since i have other appliances that need to get connected but are not wifi cable i have another wifi router. What i want to know is how can i share the second laptop's wifi with the second router so that the router can then serve as an access point to give internet to my other applinaces through ethernet cables. so in breaf i want: INTERNETMODEM (WIFI)LAPTOP 1 (WIFI)LAPTOP 2 (WIFI)Router 2 (ETHERNET)DREAMBOX & WDTV

  Read the article

• Isn't ethernet used for LAN?

  - by Alraxite

  I'm not really knowledgeable about networking stuff, hence the stupid question. I read that ethernet was used for LAN connections but I'm pretty sure what I'm currently using to connect to the internet is 'ethernet'. The only knowledge that I have about networking is that there are two types of internet connections: Dial-up and broadband. And broadband can be either DSL or cable. So where does ethernet come from? The only thing I can tell is that I have a DSL model and there is an ethernet port at the back of it, a cable from which runs to a port in the back of my CPU. So, can ethernet be used to connect to the internet? Is it a subtype of DSL? I'm really confused about this, so I would really appreciate if someone could explain this to me. Also, I will apologize if this isn't the right place to ask.

  Read the article

• How can I disable the network detection on Windows 7?

  - by Mad Scientist

  I have a computer running Windows 7 that shares some files on the network. This works fine for a while until for some unknown reason the computer decides that it is connected to a new, unknown public network and disables the file sharing capabilites. Nothing physically changes with the computer, it is still connected to the same network via ethernet cable. But it does misidentify the network every other day, just plugging out the ethernet cable and putting it back in leads Windows to correctly identify the work network and enabling the share again. Is there some way to stop Windows from trying to identify the network automatically, and just tell it that the network on that computer will never change?

  Read the article

• make a folder/partition on one computer appear as a mass storage device to another?

  - by user137560

  Is there anyway to make a folder or a partition on a computer (Linux or Windows) act like a mass storage device to other computers or devices when connected with a Male-Male USB cable? For example, I have a Windows 7 computer with 2 partitions, C and D. I would then connect that computer to another computer or a Smart TV using a Male-Male USB cable, and the other computer or device recognizes a folder/partition on current computer as a mass storage device. Is this possible? If not, is there any USB switch that can connect an external hard drive or flash drive to both a computer and TV without the need to manually switch them? (I know about some USB switches, but they only support automatic switching with some certain types of printers, not with mass storage)

  Read the article

• can I connect two modems and comunicate on two side

  - by GongT

  I just wondering how modems work. I know the process of "modulation" and "demodulation". So I wanto know is "demodulation" are simple revese of "modulation" in real world. The PC can got an IP address when connect as type 1 What will happen when I connect them like type 2? type 1 : [PC] ================= [router] type 2 : [PC] === [m] ------- [m] === [router] [m] : modem(exactly same) === : Ethernet cable --- : DSL cable (phone line, maybe optical fiber, or something else?) ISP has a large number of model, Is them same thing as the one in my home(but with diffrent size/speed/price...etc)? Or it's completely different thing?

  Read the article

• Gigabit connection between 2 computers

  - by Alecu

  I am trying to set up a connection between 2 pc's. It's a direct cable connection. The problem that I am having is that the connection isn't gigabit. I know both network cards support gigabit. I checked in the device settings and in one pc I can see in the Speed & Duplex the 1Gbps option but on the other pc I can't see that option despite the fact that the network card is gigabit. I have quite some files to copy from one pc onto another and I really need a good connection between them. I can't really remove the hard drive because it would void the warranty. Could this be a driver issue or a cable issue? On both pc's I have windows 8. The network card on the pc that doesn't have the 1 gbps option is an Atheros ar8161 card.

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >