Search Results

Search found 7455 results on 299 pages for 'power cable'.

Page 85/299 | < Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >

• Why do the IP addresses randomly change?

  - by GiddyUpHorsey

  I have a network with the following: Cable modem with static IP address Router Desktop - Win 7 VM Host - VMware ESXi 4.0 A couple of VM Guests - Windows Every now and then my Win 7 PC is unable to access some of the VMs. When I ping the VMs by their domain name their IP address shows up as the IP address of the cable modem. Sometimes I can fix it by running ipconfig /flushdns. The IP address will reset back to what it was supposed to be, but occasionally it wont work. Why does this happen and how can I fix it?

  Read the article

• configure pppoe on wrt54gl(openwrt)

  - by sunny

  Hi, I have home DSL connection from my ISP with a beetel modem at my end. I want to make my network wireless, so i bought a linksys wrt54gl and installed open-wrt on it. My ISP provides dynamic IP's with me connecting via pppoe. My question is how do I configure openwrt to work with this. Please suggest what option should I go with, or any other you recommend. DSL cable--Beetel Modem-- Wrt54gl in bridge mode with beetel modem doing the pppoe and having a DHCP server. DSL cable--Wrt54gl with wrt54gl handling the pppoe. Is option 2 possible, can I have a setup without bringing the beetel modem in the picture at all?

  Read the article

• Using a Netgear WGR614v9 to extend wireless signal from Netgear DG934GT

  - by moorcroft

  I'm wondering if someone could please provide me the steps for extending/repeating my wirless signal so that I can have greater wireless range throughout my house. I have 2 wirless Netgear routers, a DG934GT ADSL router (base unit) and WGR614v9 cable router (repeater). I've flashed both routers with the latest firmware and have turned on the wireless repeating function in the WGR614v9 but I can't get internet access when connected to the repeater, I can only get it when connected to the base unit. Can this be achieved by running an ethernet cable between the two routers as thus far I've only tried to get them to contact each other wirelessly. Any help would be appreciated

  Read the article

• Unhappy with performance of GBit Ethernet to Fiber converter

  - by Aaron Digulla

  I just bought a TP-Link MC200CM GBit Ethernet (1000-T) to Fiber (1000-SX) media converter. The device works but I'm unhappy with the performance: When connecting my computer over 1000-T (twisted pair, Cat 6, 18meters) with my server, I get a throughput of about 610MBit/s. If I replace the cable with two media converters, I'm left with about 310-315MBit/s (i.e. half the performance). My setup is like this: Computer <- GBit switch <- long cable <- GBit switch <- server Computer <- GBit switch <- MC200CM <- 30m fiber <- MC200CM <- GBit switch <- server Is there a way to improve the performance? Will another MC be faster? Or is that about as much as I can expect with the additional 2 converters?

  Read the article

• Sharing my broadband connection over a router

  - by user1004985

  I have a broadband connection which I can connect to my laptop's ethernet port. If I want to use the same connection on another machine I would have to do it via a router (I dont want to use ICS since it requires both machines to be ON). I have a router but its uplink is a 4p4c pin rather that an 8p8c(RJ45) so my broadband cable wont fit into it. The router I have is ZTE ZXDSL 531B. And the broadband connection I am talking about has an antenna on the rooftop from which an ethernet cable (CAT 5) runs to my PC's LAN port. Is there some way of utilising the LAN ports of the router to achieve what I mentioned above. Please Help

  Read the article

• Disable (or switch off) a network interface on windows but keep the "plug and play"

  - by Leandro

  I'm looking for a good workaround to do this on Windows 7 and Windows XP: Disable or make ineffective the network interface (ETH, WIFI, any NIC). If the user connect his ETH cable, the network interface enable again. Important Notes to take care: I'm working with wmic on Win7 (through the command line) I'm working with devcon on WinXP (through the command line) I'm specifically working with the .NET Framework 2.0 on C# but this is just for informational purposes. I know that an event won't help me to detect it (if there is a way or workaround to do this I don't know it). The real problem is that when I disable the NIC, I can't know if the user connects his cable or has a wired network. This is why I am looking for a workaround. I'll treat suggestions as answers if no direct answer exists. I'll provide any extra detail necessary.

  Read the article

• How to set WAN side buffers for WRT54GL running Tomato Firmware

  - by Vickash

  I've recently set up a machine running m0n0wall to try and fight buffer bloat and do some traffic shaping. It was more convenient (geographically speaking) to connect the cable modem directly to my old WRT54GL, then pass everything to the m0n0wall machine and have that do the real routing work. It took a bit of work, but it's working pretty well. I have a cable connection. I have m0n0wall set up to utilize only 90% of the specified speed of my subscription, which is fine. But I've noticed that at certain times of the day (possibly when my true bandwidth drops below that 90%), there's more latency if the connection is used heavily, and traffic shaping doesn't seem to work as well. I suspect this is caused by the buffers on the WRT54GL still being unnecessarily large. If the connection is working as expected, they won't get filled, but in times of reduced bandwidth they would. Does anyone know the command I need to execute, on the WRT54GL running Tomato Firmware, to reduce the buffers on the WAN interface to the minimum size possible?

  Read the article

• Is it common to have portable hard drive not recognize?

  - by lamwaiman1988

  I have a bad hard drive which could not be recognized by windows. If windows can recognize it, it could just be pure luck. There are better chance of it being recognize by plugging it at the usb back of the machine, rather than the front one. More interestingly, I have a usb cable which fork itself at one side ( i.e it has 2 heads at one side ). I can plug both heads to the machine and connect the portable hard drive on the other end of the usb cable? Can I get more voltage by doing this? I am guessing the front usb port doesn't have enough power. I am wondering if I buy a new portable usb hard drive, would it have easy read by plugging at the front usb port? I am not sure if I screw up the jumper connecting the front usb ports, but it is okay for other device such as usb stick and mouse.

  Read the article

• Fried graphics card, how to proceed ?

  - by user19496

  Motherboard: Biostar TPower I45 I fried my graphics card (white smoke), by removing the cable marked PCI-E from the card, and then booting. Removed the graphics card, and now the machine is booting, and I can ping it. However I have no possibility to see what is actually happening, because I can't attach a monitor. Can I workaround the lack of monitor in some way, just to see if the motherboard is fine, attach a cable and telnet in or any other way ? Or, do I have to buy and install a new graphics card to be sure ?

  Read the article

• 59 vs 60 hertz on external display via DisplayPort

  - by Shiki

  Don't know if this is a really specific question or you'll help me out. Please do. I just bought a DeLock DisplayPort cable for my Lenovo T500. Tried to use it with the in-built Intel MHD4500, no use. With the ATI HD3650 (you can switch between the two vga on this machine) I get a normal picture, but only on 59hz. On 60 I get a smaller desktop size (strange). Any idea what can cause this? Will I have any problem if I use the 59hz? (Was using the display with a VGA cable but I get a blurry picture with that (dont matter what device I attach, VGA is like this on this display) and thats why I wanted to change.)

  Read the article

• Windows 7 can't connect to via ethernet to Airpot Extreme

  - by Mr AJL

  I have an Airport Extreme, and everything works beautifully on the Mac, but my Windows 7 computer, which is connected via a regular ethernet cable, can't see any network. The Windows computer says there's no cable connected. Any ideas? Is there some kind of setting you have to enable with the Airport utility? I looked everywhere but can't find anything. Or do I need to install that Airport utility something on the PC just to connect to the router? (Haven't tried because the PC has no CD drive)

  Read the article

• Motorola SBG6850 / Linksys WRT54G network problem

  - by user96407

  I am trying to resolve issues with connecting my desktop and LAN capable printer to my network. I recently upgrade to the Motorola Cable Modem Gateway SBG6580 and have TWC coming into it, this works great for wired and wireless connectivity. Although, I am unable to connect to my device from this modem gateway. So, I am trying to cable a Linksys WRT54G (firmware 4.21.4 build 0) to the backside of the SBG6850 so I can use my printer on my network from both my wired desktop and wireless devices. I am pulling wireless off of the SBG6580 and do not want to change this. I have disable the wireless feature on the Linksys WRT54G at this moment. Can someone please help me through this dilemma? I am open to both wired and wireless solutions, but please tell me which approach your sharing in the first line of your response. Cheers!

  Read the article

• Computer disappeared from Workgroup

  - by Moayad Mardini

  I've a LAN that has 8 computers running Windows XP and only one (Computer A) running Windows Server 2003. When computer A boots, it shows up in all computers' Workgroups, but after 15-30 minutes, it disappears from the Workgroup in all computers, including itself. However, files can still be transferred from and to A via full path shortcuts and network drive maps still work. I don't know if this has anything to do with the problem or not, but if that particular computer is turned on while the LAN cable is plugged in, it doesn't connect to the network, but it connects if the cable is plugged in after the computer is run. Any tips why this is happening? Thanks.

  Read the article

• Anytime I upload something, my internet slows down extremely. What can I do?

  - by Earlz

  Title says it all. For a bit more info though: Basically, I have Time Warner cable internet. My speeds maintain a stable 2Mbit/s upload and 20Mbit/s download with average ping times around 30ms. This crazy thing happens though when I upload anything. I went to upload a 200M file to my server today through sftp and my internet completely choked up. I speed tested it during this upload and my ping time was around 800ms, download speeds of 0.2Mbit/s and Upload speeds of 0.3Mbit/s. Note, I wasn't downloading anything during this time either. It is just straight upload. What is it that causes this phenomenon? My router is OpenBSD. Is there anything I could set up to fix this problem(by queues or some such), or is this a problem with cable internet?

  Read the article

• Digital audio input on Macbook?

  - by Ken

  I have: a Macbook (not Pro), don't know the exact model but it's a Core 2 Duo 2.0GHz and probably what Wikipedia calls the "Late 2006" or "Mid 2007" model a DVD player, region-free, that has "Coax and TosLink optical digital audio outputs" I want to make an MP3 of the audio track of some DVDs (for learning a new language), and I can't use the Macbook's built-in DVD drive because it's a different region (ugh!). I'm sure I can connect the DVD player to the Macbook with an analog audio cable. However, if it's possible I'd prefer to keep the signal digital. I'm not even positive if my old Macbook has digital audio in, and if so what I need to connect to it. (I've done plenty of home audio geeking, but always in analog!) Will a "Toslink cable" plus a "Toslink Female to Mini-Plug Male Adapter" (found on Amazon) let me connect my things together? It looks like the pieces will fit but I'd like to hear someone confidently knowledgeable on the matter before I buy something. Thanks!

  Read the article

• Linux bcm43224 wifi adapter slows down a couple minutes after boot

  - by Blubber

  I just installed Ubuntu on my mid 2012 MacBook Air. Everything worked out of the box, but the wifi is showing some weird behavior. When I first login it's really fast, loading google.com is near instant, and browsing in general feels at least as smooth as it did on Mac OS. However, after a couple minutes the connection slows down dramatically, sometimes it takes over 5s to load google.com, a simple reboot fixes the problem for another couple minutes. Specs: Wifi: 02:00.0 Network controller: Broadcom Corporation BCM43224 802.11a/b/g/n (rev 01) Driver: open-source brcmsmac driver Kernel: Linux wega 3.8.0-21-generic #32-Ubuntu SMP Tue May 14 22:16:46 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux Distro: Ubuntu 13.04 (uptodate) I tried a number of things, none of which actually helped Use proprietary sta driver from broadcom Installed firmware into /lib/firmware/brcms (which, as far as I can tell from logs, does not get loaded at all) Switch router to only use 2.4 OR 5 GHz Set router to only use a OR g OR n Set router to use AES encryption only Turned off power management on the adapter Set regulatory region to the correct value (NL) on both router and laptop Disable ipv6 Nothing seems to help, the slowdown always occurs. I did notice that the latency (ping google.com) stays roughly the same (around 9ms). Below is some more information that might be of use. $ lspci -nnk | grep -iA2 net 02:00.0 Network controller [0280]: Broadcom Corporation BCM43224 802.11a/b/g/n [14e4:4353] (rev 01) Subsystem: Apple Inc. Device [106b:00e9] Kernel driver in use: bcma-pci-bridge $ rfkill list 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: no Hard blocked: no $ lsmod Module Size Used by dm_crypt 22820 1 arc4 12615 2 brcmsmac 550698 0 coretemp 13355 0 kvm_intel 132891 0 parport_pc 28152 0 kvm 443165 1 kvm_intel ppdev 17073 0 cordic 12574 1 brcmsmac brcmutil 14755 1 brcmsmac mac80211 606457 1 brcmsmac cfg80211 510937 2 brcmsmac,mac80211 bnep 18036 2 rfcomm 42641 12 joydev 17377 0 applesmc 19353 0 input_polldev 13896 1 applesmc snd_hda_codec_hdmi 36913 1 microcode 22881 0 snd_hda_codec_cirrus 23829 1 nls_iso8859_1 12713 1 uvcvideo 80847 0 btusb 22474 0 snd_hda_intel 39619 3 videobuf2_vmalloc 13056 1 uvcvideo snd_hda_codec 136453 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec_cirrus bcm5974 17347 0 bluetooth 228619 22 bnep,btusb,rfcomm snd_hwdep 13602 1 snd_hda_codec lpc_ich 17061 0 videobuf2_memops 13202 1 videobuf2_vmalloc videobuf2_core 40513 1 uvcvideo videodev 129260 2 uvcvideo,videobuf2_core bcma 41051 1 brcmsmac snd_pcm 97451 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel snd_page_alloc 18710 2 snd_pcm,snd_hda_intel snd_seq_midi 13324 0 snd_seq_midi_event 14899 1 snd_seq_midi snd_rawmidi 30180 1 snd_seq_midi snd_seq 61554 2 snd_seq_midi_event,snd_seq_midi snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi snd_timer 29425 2 snd_pcm,snd_seq snd 68876 16 snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_hda_codec_cirrus mei 41158 0 soundcore 12680 1 snd apple_bl 13673 0 mac_hid 13205 0 lp 17759 0 parport 46345 3 lp,ppdev,parport_pc usb_storage 57204 0 hid_apple 13237 0 hid_generic 12540 0 ghash_clmulni_intel 13259 0 aesni_intel 55399 399 aes_x86_64 17255 1 aesni_intel xts 12885 1 aesni_intel lrw 13257 1 aesni_intel gf128mul 14951 2 lrw,xts ablk_helper 13597 1 aesni_intel cryptd 20373 4 ghash_clmulni_intel,aesni_intel,ablk_helper i915 600351 3 ahci 25731 3 libahci 31364 1 ahci video 19390 1 i915 i2c_algo_bit 13413 1 i915 drm_kms_helper 49394 1 i915 usbhid 47074 0 drm 286313 4 i915,drm_kms_helper hid 101002 3 hid_generic,usbhid,hid_apple $ dmesg | egrep 'b43|bcma|brcm|[F]irm' [ 0.055025] [Firmware Bug]: ioapic 2 has no mapping iommu, interrupt remapping will be disabled [ 0.152336] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored [ 2.187681] pci_root PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-99] only partially covers this bridge [ 12.553600] bcma-pci-bridge 0000:02:00.0: enabling device (0000 -> 0002) [ 12.553657] bcma: bus0: Found chip with id 0xA8D8, rev 0x01 and package 0x08 [ 12.553688] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x22, class 0x0) [ 12.553715] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x17, class 0x0) [ 12.553764] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x0F, class 0x0) [ 12.605777] bcma: bus0: Bus registered [ 12.852925] brcmsmac bcma0:0: mfg 4bf core 812 rev 23 class 0 irq 17 [ 13.085176] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: false (implement) [ 13.085186] brcmsmac bcma0:0: brcms_ops_config: change power-save mode: false (implement) [ 20.862617] brcmsmac bcma0:0: brcmsmac: brcms_ops_bss_info_changed: associated [ 20.862622] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 20.862625] brcmsmac bcma0:0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 20.897957] brcmsmac bcma0:0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) $ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"wlan" Mode:Managed Frequency:5.22 GHz Access Point: E0:46:9A:4E:63:9A Bit Rate=65 Mb/s Tx-Power=17 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=63/70 Signal level=-47 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:13 Invalid misc:56 Missed beacon:0

  Read the article

• Why is my router assigning the wrong address via DHCP

  - by Barry

  I have a WRT54G router that is set up to serve out addresses via DHCP. It correctly serves up addresses to every other machine on the network, including another PC, my macbook when connected via wireless, my wife's notebook, and our printer. However, whenever I attach my macbook to the router via an ethernet cable, the address it is given via DHCP is wrong. My local network is set up as 192.168.1.*. However, when my macbook connects with an ethernet cable, it is given the IP 192.168.29.*. Currently, I have the macbook set up with a manual IP address, and all seems to be working fine. Any ideas on what could be causing this?

  Read the article

• HOw to give static ip to router from window XP LAN

  - by Captain Planet

  I have the USB modem internet connection. I am using ICS sharing in XP to share my internet connection. ON window XP LAN i have set up the LAN IP as 192.168.137.1 255.255.255.0 Now i have joined the cable from that XP LAN to another LAPTOP running vista Now if set the LAN on VISTA to get ip automatically them internet don't work but if manually set the ip to 192.168.137.3 255.255.255.0 gateway 192.168.137.1 Then my internet works But i want to join that LAN cable from XP to rouer so that i can use router to divide internet. But i don't know how i can give static ipto router because i think somehow that LAN on XP is not giving the IP address

  Read the article

• Why does eth0 show an IP if I'm booting into runlevel 1?

  - by banjer

  I'm having some issues with networking on a new Linux server I'm building. The OS is SLES 11. When booting into runlevel 1, I see that eth0 is showing an IP. Physically, there is a network cable plugged into the card associated with eth1, and then there is a network cable plugged into a QLogic iSCSI card (eth4, not shown). I've been troubleshooting this for awhile, and it seems like eth0 is somehow getting assigned an IP, even though it isn't configured in Linux or even plugged into the network for that matter. Thoughts? ifconfig -a Here is the ifconfig output (Sorry, I need more rep before I can post images on SF...)

  Read the article

• unable to sniff traffic despite network interface being in monitor or promiscuous mode

  - by user65126

  I'm trying to sniff out my network's wireless traffic but am having issues. I'm able to put the card in monitor mode, but am unable to see any traffic except broadcasts, multicasts and probe/beacon frames. I have two network interfaces on this laptop. One is connected normally to 'linksys' and the other is in monitor mode. The interface in monitor mode is on the right channel. I'm not associated with the access point because, as I understand, I don't need to if using monitor mode (vs promiscuous). When I try to ping the router ip, I'm not seeing that traffic show up in wireshark. Here's my ifconfig settings: daniel@seasonBlack:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1f:29:9e:b2:89 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:112 errors:0 dropped:0 overruns:0 frame:0 TX packets:112 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8518 (8.5 KB) TX bytes:8518 (8.5 KB) wlan0 Link encap:Ethernet HWaddr 00:21:00:34:f7:f4 inet addr:192.168.1.116 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::221:ff:fe34:f7f4/64 Scope:Link UP BROADCAST RUNNING MTU:1500 Metric:1 RX packets:9758 errors:0 dropped:0 overruns:0 frame:0 TX packets:4869 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:3291516 (3.2 MB) TX bytes:677386 (677.3 KB) wlan1 Link encap:UNSPEC HWaddr 00-02-72-7B-92-53-33-34-00-00-00-00-00-00-00-00 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:1500 Metric:1 RX packets:112754 errors:0 dropped:0 overruns:0 frame:0 TX packets:101 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:18569124 (18.5 MB) TX bytes:12874 (12.8 KB) wmaster0 Link encap:UNSPEC HWaddr 00-21-00-34-F7-F4-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wmaster1 Link encap:UNSPEC HWaddr 00-02-72-7B-92-53-00-00-00-00-00-00-00-00-00-00 UP RUNNING MTU:0 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Here's my iwconfig settings: daniel@seasonBlack:~$ iwconfig lo no wireless extensions. eth0 no wireless extensions. wmaster0 no wireless extensions. wlan0 IEEE 802.11bg ESSID:"linksys" Mode:Managed Frequency:2.437 GHz Access Point: 00:18:F8:D6:17:34 Bit Rate=54 Mb/s Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality=68/70 Signal level=-42 dBm Noise level=-69 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 wmaster1 no wireless extensions. wlan1 IEEE 802.11bg Mode:Monitor Frequency:2.437 GHz Tx-Power=27 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off Link Quality:0 Signal level:0 Noise level:0 Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 Here's how I know I'm on the right channel: daniel@seasonBlack:~$ iwlist channel lo no frequency information. eth0 no frequency information. wmaster0 no frequency information. wlan0 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Current Frequency=2.437 GHz (Channel 6) wmaster1 no frequency information. wlan1 11 channels in total; available frequencies : Channel 01 : 2.412 GHz Channel 02 : 2.417 GHz Channel 03 : 2.422 GHz Channel 04 : 2.427 GHz Channel 05 : 2.432 GHz Channel 06 : 2.437 GHz Channel 07 : 2.442 GHz Channel 08 : 2.447 GHz Channel 09 : 2.452 GHz Channel 10 : 2.457 GHz Channel 11 : 2.462 GHz Current Frequency=2.437 GHz (Channel 6)

  Read the article

• Serial port access errors in WINE

  - by goldenmean

  Hello, I have a setup in which I use a USB serial adapter + some application which sends and receives data using that serial usb. But this setup which works on a Windows, or even in a VMWare Virtual windows, does not work under WINE. IT transmits data but i cannot receive data. The cable and the applications are same as in the working and non-working scenarios. I guess The fact that the application works over the USB serial cable just as fine under Virtual Windows(VMware running on linux) by mapping /dev/ttyUSB to the com port, no external software/DLL needed, means it does not need any specific driver. (Am I correct in this assumption that application doesnt need any driver?) (I also tried with a different setup(different USB serial adapter + different application under WINE, but even that does not work under WINE, but it works fine under WIndows/Virtual Windows) How can I get it working under WINE? Any pointers appreciated.

  Read the article

• Edimax wireless router is not providing DNS services correctly

  - by Nathan Fellman

  I have an Edimax router that is set up to connect to the internet via L2TP on cable, and on the LAN side it's set up as a DHCP server. The DHCP server gives correct IP addresses, but it sets itself up as the DNS server. However, it doesn't provide the DNS service. I am sure that it's a problem with the router, because I have two computers on the network with the same problem. I see that on the WAN side it gets correct DNS addresses from the ISP, so I'd expect the router to either pass these addresses through to the DHCP clients, or to serve the DNS requests itself by forwarding them to the ISP's DNS. However, it apparently does neither, and there is no DNS. I switched from ADSL to cable last week. On ADSL it connected using PPPoE, and the DNS worked fine. What can be the problem here?

  Read the article

• Is to possible to achieve the SATA II's 3Gbps (375MBps) between home network storage and home computers?

  - by techaddict

  Gigabit ethernet only has 1Gbps (125MBps), whereas SATA II has up to three times that rate. Is it possible to achieve the rate of three times Gigabit ethernet connection which is SATA II speeds, between home network storage and the laptops and desktops with SATA II hard drives? If so, how? Or, is the limitation of a gigabit ethernet port on the laptops the limitng factor, making 1000Gbps the fastest practical transfer speed possible? (practical, meaning that without taking apart the laptop and doing physical modifications like branching a SATA II transfer cable, etc.) -- I just realized -- wouldn't a USB 3.0 cable do the trick? Since USB 3.0 can reach up to 675MBps?

  Read the article

• please demystify the 10Gb ethernet interfaces, cables

  - by maruti

  this really is a Dell question but tempted to ask the experts @ serverfault. choosen a Dell powerconnect 8024 10GbE switch. per the spec sheet this has 10GbaseT ports. "24x 10GBASE-T (10Gb/1Gb/100Mb) with 4x Combo Ports of SFP+ (10Gb/1Gb) or 10GBASE-T" the HBA on my storage server has 10G CX4 copper ports Dell does not sell any cables and this adds to my confusion. from the picture Dell 8024 seems to have RJ-45 type ports on the front panel? my question: is it a RJ-45 + CX4 cable or CX4 + CX4 cable?

  Read the article

• How can I stop my laptop display from flickering when I connect my TV?

  - by Lord Torgamus

  I have a laptop with an HDMI output port running Vista, and an HDTV with HDMI input ports. The laptop is set to extend its desktop onto a second monitor. When I connect the computer to the TV with an HDMI cable, my laptop screen usually flickers rapidly. Most of the time it lasts for about 30 seconds, but sometimes it lasts for several minutes and once in a while it doesn't happen at all. It wouldn't be so bad except that the cursor moves back to the center of the laptop screen with each flicker, so I can't really do anything until the machine decides it's ready to calm down. I haven't been able to find any pattern at all for the causes or duration of the flickering. It doesn't seem to matter what programs the laptop is running when I connect it to the TV, whether I enable the extended display before or after I connect the TV or which HDMI port/cable I use. What could be causing this, and how can I make it go away?

  Read the article

< Previous Page | 81 82 83 84 85 86 87 88 89 90 91 92  | Next Page >