Search Results

Search found 2468 results on 99 pages for 'splattered bits'.

Page 88/99 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

• Session Report - Java on the Raspberry Pi

  - by Janice J. Heiss

  On mid-day Wednesday, the always colorful Oracle Evangelist Simon Ritter demonstrated Java on the Raspberry Pi at his session, “Do You Like Coffee with Your Dessert?”. The Raspberry Pi consists of a credit card-sized single-board computer developed in the UK with the intention of stimulating the teaching of basic computer science in schools. “I don't think there is a single feature that makes the Raspberry Pi significant,” observed Ritter, “but a combination of things really makes it stand out. First, it's $35 for what is effectively a completely usable computer. You do have to add a power supply, SD card for storage and maybe a screen, keyboard and mouse, but this is still way cheaper than a typical PC. The choice of an ARM (Advanced RISC Machine and Acorn RISC Machine) processor is noteworthy, because it avoids problems like cooling (no heat sink or fan) and can use a USB power brick. When you add in the enormous community support, it offers a great platform for teaching everyone about computing.”Some 200 enthusiastic attendees were present at the session which had the feel of Simon Ritter sharing a fun toy with friends. The main point of the session was to show what Oracle was doing to support Java on the Raspberry Pi in a way that is entertaining and fun. Ritter pointed out that, in addition to being great for teaching, it’s an excellent introduction to the ARM architecture, and runs well with Java and will get better once it has official hard float support. The possibilities are vast.Ritter explained that the Raspberry Pi Project started in 2006 with the goal of devising a computer to inspire children; it drew inspiration from the BBC Micro literacy project of 1981 that produced a series of microcomputers created by the Acorn Computer company. It was officially launched on February 29, 2012, with a first production of 10,000 boards. There were 100,000 pre-orders in one day; currently about 4,000 boards are produced a day. Ritter described the specification as follows:* CPU: ARM 11 core running at 700MHz Broadcom SoC package Can now be overclocked to 1GHz (without breaking the warranty!) * Memory: 256Mb* I/O: HDMI and composite video 2 x USB ports (Model B only) Ethernet (Model B only) Header pins for GPIO, UART, SPI and I2C He took attendees through a brief history of ARM Architecture:* Acorn BBC Micro (6502 based) Not powerful enough for Acorn’s plans for a business computer * Berkeley RISC Project UNIX kernel only used 30% of instruction set of Motorola 68000 More registers, less instructions (Register windows) One chip architecture to come from this was… SPARC * Acorn RISC Machine (ARM) 32-bit data, 26-bit address space, 27 registers First machine was Acorn Archimedes * Spin off from Acorn, Advanced RISC MachinesNext he presented its features:* 32-bit RISC Architecture–  ARM accounts for 75% of embedded 32-bit CPUs today– 6.1 Billion chips sold last year (zero manufactured by ARM)* Abstract architecture and microprocessor core designs– Raspberry Pi is ARM11 using ARMv6 instruction set* Low power consumption– Good for mobile devices– Raspberry Pi can be powered from 700mA 5V only PSU– Raspberry Pi does not require heatsink or fanHe described the current ARM Technology:* ARMv6– ARM 11, ARM Cortex-M* ARMv7– ARM Cortex-A, ARM Cortex-M, ARM Cortex-R* ARMv8 (Announced)– Will support 64-bit data and addressingHe next gave the Java Specifics for ARM: Floating point operations* Despite being an ARMv6 processor it does include an FPU– FPU only became standard as of ARMv7* FPU (Hard Float, or HF) is much faster than a software library* Linux distros and Oracle JVM for ARM assume no HF on ARMv6– Need special build of both– Raspbian distro build now available– Oracle JVM is in the works, release date TBDNot So RISCPerformance Improvements* DSP Enhancements* Jazelle* Thumb / Thumb2 / ThumbEE* Floating Point (VFP)* NEON* Security Enhancements (TrustZone)He spent a few minutes going over the challenges of using Java on the Raspberry Pi and covered:* Sound* Vision * Serial (TTL UART)* USB* GPIOTo implement sound with Java he pointed out:* Sound drivers are now included in new distros* Java Sound API– Remember to add audio to user’s groups– Some bits work, others not so much* Playing (the right format) WAV file works* Using MIDI hangs trying to open a synthesizer* FreeTTS text-to-speech– Should work once sound works properlyHe turned to JavaFX on the Raspberry Pi:* Currently internal builds only– Will be released as technology preview soon* Work involves optimal implementation of Prism graphics engine– X11?* Once the JavaFX implementation is completed there will be little of concern to developers-- It’s just Java (WORA). He explained the basis of the Serial Port:* UART provides TTL level signals (3.3V)* RS-232 uses 12V signals* Use MAX3232 chip to convert* Use this for access to serial consoleHe summarized his key points. The Raspberry Pi is a very cool (and cheap) computer that is great for teaching, a great introduction to ARM that works very well with Java and will work better in the future. The opportunities are limitless. For further info, check out, Raspberry Pi User Guide by Eben Upton and Gareth Halfacree. From there, Ritter tried out several fun demos, some of which worked better than others, but all of which were greeted with considerable enthusiasm and support and good humor (even when he ran into some glitches).  All in all, this was a fun and lively session.

  Read the article

• Vendors: Partners or Salespeople?

  - by BuckWoody

  I got a great e-mail from a friend that asked about how he could foster a better relationship with his vendors. So many times when you work with a vendor it’s more of a used-car sales experience than a partnership – but you can actually make your vendor more of a partner, as long as you both set some ground-rules at the start. Sit down with your vendor, and have a heart-to-heart talk with them, explain that they won’t win every time, but that you’re willing to work with them in an honest way on both sides. Here’s the advice I sent him verbatim. I hope this post generates lots of comments from both customers and vendors. I don’t expect that you’ve had a great experience with your Microsoft reps, but I happen to work with some of the best sales teams in the business, and our clients tell us that all the time. “The key to this relationship is to keep the audience really small. Ideally there should be one person from your side that is responsible for the relationship, and one from the vendor’s side. Each responsible person should have the authority to make decisions, and to bring in other folks as needed for a given topic, project or decision.   For Microsoft, this is called an “Account Manager” – they aren’t technical, they aren’t sales. They “own” a relationship with a company. They learn what the company does, who does it, and how. They are responsible to understand what the challenges in your company are. While they don’t know the bits and bytes of everything we sell, they know what each thing does, and who to talk to about it. I get a call from an Account Manager every week that has pre-digested an issue at an organization and says to me: “I need you to set up an architectural meeting with their technical staff to get a better read on how we can help with problem X.” I do that and then report back to the Account Manager what we learned.  All through this process there’s the atmosphere of a “team”, not a “sales opportunity” per se. I’ve even recommended that the firm use a rival product, and I’ve never gotten push-back on that decision from my Account Managers.   But that brings up an interesting point. Someone pays an Account Manager and pays me. They expect something in return. At some point, you have to buy something. Not every time, not every situation – sometimes it’s just helping you with what you already bought from us. But the point is that you can’t expect lots of love and never spend any money. That’s the way business works.   Finally, don’t view the vendor as someone with their hand in your pocket – somebody that’s just trying to sell you something and doesn’t care if they ever see you again – unless they deserve it. There are plenty of “love them and leave them” companies out there, and you may have even had this experience with us, but that isn’t the case in the firms I work with. In fact, my customers get a questionnaire that asks them that exact question. “How many times have you seen your account team? Did you like your interaction with them? Can they do better?” My raises, performance reviews and general standing in my group are based on the answers the company gives.  Ask your vendor if they measure their sales and support teams this way – if not, seek another vendor to partner with.   Partnering with someone is a big deal. It involves time and effort on your part, and on the vendor’s part. If either of you isn’t pulling your weight, it just won’t work. You have every right to expect them to treat you as a partner, and they have the same right for your side.” Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• How Can I Safely Destroy Sensitive Data CDs/DVDs?

  - by Jason Fitzpatrick

  You have a pile of DVDs with sensitive information on them and you need to safely and effectively dispose of them so no data recovery is possible. What’s the most safe and efficient way to get the job done? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. The Question SuperUser reader HaLaBi wants to know how he can safely destroy CDs and DVDs with personal data on them: I have old CDs/DVDs which have some backups, these backups have some work and personal files. I always had problems when I needed to physically destroy them to make sure no one will reuse them. Breaking them is dangerous, pieces could fly fast and may cause harm. Scratching them badly is what I always do but it takes long time and I managed to read some of the data in the scratched CDs/DVDs. What’s the way to physically destroy a CD/DVD safely? How should he approach the problem? The Answer SuperUser contributor Journeyman Geek offers a practical solution coupled with a slightly mad-scientist solution: The proper way is to get yourself a shredder that also handles cds – look online for cd shredders. This is the right option if you end up doing this routinely. I don’t do this very often – For small scale destruction I favour a pair of tin snips – they have enough force to cut through a cd, yet are blunt enough to cause small cracks along the sheer line. Kitchen shears with one serrated side work well too. You want to damage the data layer along with shearing along the plastic, and these work magnificently. Do it in a bag, cause this generates sparkly bits. There’s also the fun, and probably dangerous way – find yourself an old microwave, and microwave them. I would suggest doing this in a well ventilated area of course, and not using your mother’s good microwave. There’s a lot of videos of this on YouTube – such as this (who’s done this in a kitchen… and using his mom’s microwave). This results in a very much destroyed cd in every respect. If I was an evil hacker mastermind, this is what I’d do. The other options are better for the rest of us. Another contributor, Keltari, notes that the only safe (and DoD approved) way to dispose of data is total destruction: The answer by Journeyman Geek is good enough for almost everything. But oddly, that common phrase “Good enough for government work” does not apply – depending on which part of the government. It is technically possible to recover data from shredded/broken/etc CDs and DVDs. If you have a microscope handy, put the disc in it and you can see the pits. The disc can be reassembled and the data can be reconstructed — minus the data that was physically destroyed. So why not just pulverize the disc into dust? Or burn it to a crisp? While technically, that would completely eliminate the data, it leaves no record of the disc having existed. And in some places, like DoD and other secure facilities, the data needs to be destroyed, but the disc needs to exist. If there is a security audit, the disc can be pulled to show it has been destroyed. So how can a disc exist, yet be destroyed? Well, the most common method is grinding the disc down to destroy the data, yet keep the label surface of the disc intact. Basically, it’s no different than using sandpaper on the writable side, till the data is gone. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

  Read the article

• Microsoft BUILD 2013 Day 1&ndash;Keynote

  - by Tim Murphy

  Originally posted on: http://geekswithblogs.net/tmurphy/archive/2013/06/27/microsoft-build-2013-day-1ndashkeynote.aspx This one is going to be a little long because the keynote was jam-packed so bare with me. The keynote for the first day of BUILD 2013 was kicked off by Steve Balmer.  He made it very clear that Microsoft’s focus is on accelerating its time to market with products and product updates.  His quote was that “Rapid release” is the new norm.  He continued by showing off several new Lumias that have been buzzing around the internet for a while and announce that Sprint will now be carrying the HTC 8XT and Samsung ATIV. Balmer is known for repeating words or phrase for affect.  This time it was “Rapid release, rapid release” and “Touch, touch, touch, touch, touch, …”.  This was fun, but even more fun was when he announce that all attendees would receive an Acer Iconia 8” tablet. SCORE! The next subject Balmer focused on is new apps.  The three new ones were Flipboard, Facebook and NFL Fantasy Football.  I liked the first two because these are ones that people coming from other platforms are missing.  The NFL app is great just because it targets a demographic that can be fanatical.  If these types of apps keep coming than the missing app argument goes away. While many Negative Nancy’s are describing Windows 8.1 as Windows 180 Steve Balmer chose to call it a “refined blend” as in a coffee that has been improved with a new mix.  This includes more multi-tasking options and leveraging Bing straight throughout the entire ecosystem. He ended this first section by explaining that this will also bring more Bing development opportunities to the community. Steve Balmer was followed by Julie Larson-Green who spent her time on stage selling us on Windows 8 all over again from my point of view.  Something that I would not have thought was needed until I had listened to some other attendees who had a number of concerns and complaints.  She showed a number of new gestures that will come with Windows 8.1, and while they were cool I was left wondering if they really improved the experience.  I guess only time will tell. I did like the fact that it the UI implementation to bring up “All Apps” now mirrors that of Windows Phone.  The consistency is a big step forward that I hope to see continue.  The cool factor went up from there as she swiped content from a desktop (mega-tablet) to the XBox One.  This seamless experience I believe is what is really needed for any future platform to be relevant. I was much more enthused by the presentation of Antoine Leblond who humbled us by letting us know that there are 5k new API.  How that can be or how anyone would ever use all of them is another question.  His announcement was that the Visual Studio 2013 preview would be available today along with the Windows 8.1 bits.  One of the features of VS2013 that he demonstrated is the power consumption profiler.  With battery life being a key factor with consumer consumption devices this is a welcome addition. He didn’t limit his presentation to VS2013 features though.  He showed how the Store has been redesigned to enable better search and discoverability of apps and how Win 8.1 can perform multiple screen scales depending on the resolution of the device automatically.  The last feature he demoed was the real time video streaming API which he made sure we understood by attaching a Surface to a little robot.  Oh, but there was one more thing.  Antoine and Julie announce that all attendees would also be getting Surface Pros.  BONUS! How much more could there be?  Gurdeep Singh Pall was about to pile on.  He introduced us to Bing as a platform (BaaP?).  He said if they (Microsoft) could do something with and API that is good 3rd party developers can do something that is dynamite and showed us some of the tools they had produced.  These included natural user interface improvements such as voice commands that looked to put Siri to shame.  Add to that 3D, OCR and translation capabilities and the future looks to be full of opportunities. Balmer then came out to show us one last thing.  Project Spark is a game design environment that will be available for Windows 8.1, XBox 360 and XBox One.  All I can say is that if my kids get their hands on this they are going to be able to learn some of what dad does in a much more enjoyable way. At the end of it all I was both exhausted and energized by what I saw.  What could they have possibly left for the day 2 keynote?  I hear it will feature Scott Hanselman.  If that is right we are in for a treat.  See you there. del.icio.us Tags: BUILD 2013,Windows 8.1,Winodws Phone,XAML,Keynote,Bing,Visual Studio 2013,Project Spark

  Read the article

• Node Serialization in NetBeans Platform 7.0

  - by Geertjan

  Node serialization makes sense when you're not interested in the data (since that should be serialized to a database), but in the state of the application. For example, when the application restarts, you want the last selected node to automatically be selected again. That's not the kind of information you'll want to store in a database, hence node serialization is not about data serialization but about application state serialization. I've written about this topic in October 2008, here and here, but want to show how to do this again, using NetBeans Platform 7.0. Somewhere I remember reading that this can't be done anymore and that's typically the best motivation for me, i.e., to prove that it can be done after all. Anyway, in a standard POJO/Node/BeanTreeView scenario, do the following: Remove the "@ConvertAsProperties" annotation at the top of the class, which you'll find there if you used the Window Component wizard. We're not going to use property-file based serialization, but plain old java.io.Serializable  instead. In the TopComponent, assuming it is named "UserExplorerTopComponent", typically at the end of the file, add the following: @Override public Object writeReplace() { //We want to work with one selected item only //and thanks to BeanTreeView.setSelectionMode, //only one node can be selected anyway: Handle handle = NodeOp.toHandles(em.getSelectedNodes())[0]; return new ResolvableHelper(handle); } public final static class ResolvableHelper implements Serializable { private static final long serialVersionUID = 1L; public Handle selectedHandle; private ResolvableHelper(Handle selectedHandle) { this.selectedHandle = selectedHandle; } public Object readResolve() { WindowManager.getDefault().invokeWhenUIReady(new Runnable() { @Override public void run() { try { //Get the TopComponent: UserExplorerTopComponent tc = (UserExplorerTopComponent) WindowManager.getDefault().findTopComponent("UserExplorerTopComponent"); //Get the display text to search for: String selectedDisplayName = selectedHandle.getNode().getDisplayName(); //Get the root, which is the parent of the node we want: Node root = tc.getExplorerManager().getRootContext(); //Find the node, by passing in the root with the display text: Node selectedNode = NodeOp.findPath(root, new String[]{selectedDisplayName}); //Set the explorer manager's selected node: tc.getExplorerManager().setSelectedNodes(new Node[]{selectedNode}); } catch (PropertyVetoException ex) { Exceptions.printStackTrace(ex); } catch (IOException ex) { Exceptions.printStackTrace(ex); } } }); return null; } } Assuming you have a node named "UserNode" for a type named "User" containing a property named "type", add the bits in bold below to your "UserNode": public class UserNode extends AbstractNode implements Serializable { static final long serialVersionUID = 1L; public UserNode(User key) { super(Children.LEAF); setName(key.getType()); } @Override public Handle getHandle() { return new CustomHandle(this, getName()); } public class CustomHandle implements Node.Handle { static final long serialVersionUID = 1L; private AbstractNode node = null; private final String searchString; public CustomHandle(AbstractNode node, String searchString) { this.node = node; this.searchString = searchString; } @Override public Node getNode() { node.setName(searchString); return node; } } } Run the application and select one of the user nodes. Close the application. Start it up again. The user node is not automatically selected, in fact, the window does not open, and you will see this in the output: Caused: java.io.InvalidClassException: org.serialization.sample.UserNode; no valid constructor Read this article and then you'll understand the need for this class: public class BaseNode extends AbstractNode { public BaseNode() { super(Children.LEAF); } public BaseNode(Children kids) { super(kids); } public BaseNode(Children kids, Lookup lkp) { super(kids, lkp); } } Now, instead of extending AbstractNode in your UserNode, extend BaseNode. Then the first non-serializable superclass of the UserNode has an explicitly declared no-args constructor, Do the same as the above for each node in the hierarchy that needs to be serialized. If you have multiple nodes needing serialization, you can share the "CustomHandle" inner class above between all the other nodes, while all the other nodes will also need to extend BaseNode (or provide their own non-serializable super class that explicitly declares a no-args constructor). Now, when I run the application, I select a node, then I close the application, restart it, and the previously selected node is automatically selected when the application has restarted.

  Read the article

• A Basic Thread

  - by Joe Mayo

  Most of the programs written are single-threaded, meaning that they run on the main execution thread. For various reasons such as performance, scalability, and/or responsiveness additional threads can be useful. .NET has extensive threading support, from the basic threads introduced in v1.0 to the Task Parallel Library (TPL) introduced in v4.0. To get started with threads, it's helpful to begin with the basics; starting a Thread. Why Do I Care? The scenario I'll use for needing to use a thread is writing to a file.  Sometimes, writing to a file takes a while and you don't want your user interface to lock up until the file write is done. In other words, you want the application to be responsive to the user. How Would I Go About It? The solution is to launch a new thread that performs the file write, allowing the main thread to return to the user right away.  Whenever the file writing thread completes, it will let the user know.  In the meantime, the user is free to interact with the program for other tasks. The following examples demonstrate how to do this. Show Me the Code? The code we'll use to work with threads is in the System.Threading namespace, so you'll need the following using directive at the top of the file: using System.Threading; When you run code on a thread, the code is specified via a method.  Here's the code that will execute on the thread: private static void WriteFile() { Thread.Sleep(1000); Console.WriteLine("File Written."); } The call to Thread.Sleep(1000) delays thread execution. The parameter is specified in milliseconds, and 1000 means that this will cause the program to sleep for approximately 1 second.  This method happens to be static, but that's just part of this example, which you'll see is launched from the static Main method.  A thread could be instance or static.  Notice that the method does not have parameters and does not have a return type. As you know, the way to refer to a method is via a delegate.  There is a delegate named ThreadStart in System.Threading that refers to a method without parameters or return type, shown below: ThreadStart fileWriterHandlerDelegate = new ThreadStart(WriteFile); I'll show you the whole program below, but the ThreadStart instance above goes in the Main method. The thread uses the ThreadStart instance, fileWriterHandlerDelegate, to specify the method to execute on the thread: Thread fileWriter = new Thread(fileWriterHandlerDelegate); As shown above, the argument type for the Thread constructor is the ThreadStart delegate type. The fileWriterHandlerDelegate argument is an instance of the ThreadStart delegate type. This creates an instance of a thread and what code will execute, but the new thread instance, fileWriter, isn't running yet. You have to explicitly start it, like this: fileWriter.Start(); Now, the code in the WriteFile method is executing on a separate thread. Meanwhile, the main thread that started the fileWriter thread continues on it's own.  You have two threads running at the same time. Okay, I'm Starting to Get Glassy Eyed. How Does it All Fit Together? The example below is the whole program, pulling all the previous bits together. It's followed by its output and an explanation. using System; using System.Threading; namespace BasicThread { class Program { static void Main() { ThreadStart fileWriterHandlerDelegate = new ThreadStart(WriteFile); Thread fileWriter = new Thread(fileWriterHandlerDelegate); Console.WriteLine("Starting FileWriter"); fileWriter.Start(); Console.WriteLine("Called FileWriter"); Console.ReadKey(); } private static void WriteFile() { Thread.Sleep(1000); Console.WriteLine("File Written"); } } } And here's the output: Starting FileWriter Called FileWriter File Written So, Why are the Printouts Backwards? The output above corresponds to Console.Writeline statements in the program, with the second and third seemingly reversed. In a single-threaded program, "File Written" would print before "Called FileWriter". However, this is a multi-threaded (2 or more threads) program.  In multi-threading, you can't make any assumptions about when a given thread will run.  In this case, I added the Sleep statement to the WriteFile method to greatly increase the chances that the message from the main thread will print first. Without the Thread.Sleep, you could run this on a system with multiple cores and/or multiple processors and potentially get different results each time. Interesting Tangent but What Should I Get Out of All This? Going back to the main point, launching the WriteFile method on a separate thread made the program more responsive.  The file writing logic ran for a while, but the main thread returned to the user, as demonstrated by the print out of "Called FileWriter".  When the file write finished, it let the user know via another print statement. This was a very efficient use of CPU resources that made for a more pleasant user experience. Joe

  Read the article

• How do I cleanly design a central render/animation loop?

  - by mtoast

  I'm learning some graphics programming, and am in the midst of my first such project of any substance. But, I am really struggling at the moment with how to architect it cleanly. Let me explain. To display complicated graphics in my current language of choice (JavaScript -- have you heard of it?), you have to draw graphical content onto a <canvas> element. And to do animation, you must clear the <canvas> after every frame (unless you want previous graphics to remain). Thus, most canvas-related JavaScript demos I've seen have a function like this: function render() { clearCanvas(); // draw stuff here requestAnimationFrame(render); } render, as you may surmise, encapsulates the drawing of a single frame. What a single frame contains at a specific point in time, well... that is determined by the program state. So, in order for my program to do its thing, I just need to look at the state, and decide what to render. Right? Right. But that is more complicated than it seems. My program is called "Critter Clicker". In my program, you see several cute critters bouncing around the screen. Clicking on one of them agitates it, making it bounce around even more. There is also a start screen, which says "Click to start!" prior to the critters being displayed. Here are a few of the objects I'm working with in my program: StartScreenView // represents the start screen CritterTubView // represents the area in which the critters live CritterList // a collection of all the critters Critter // a single critter model CritterView // view of a single critter Nothing too egregious with this, I think. Yet, when I set out to flesh out my render function, I get stuck, because everything I write seems utterly ugly and reminiscent of a certain popular Italian dish. Here are a couple of approaches I've attempted, with my internal thought process included, and unrelated bits excluded for clarity. Approach 1: "It's conditions all the way down" // "I'll just write the program as I think it, one frame at a time." if (assetsLoaded) { if (userClickedToStart) { if (critterTubDisplayed) { if (crittersDisplayed) { forEach(crittersList, function(c) { if (c.wasClickedRecently) { c.getAgitated(); } }); } else { displayCritters(); } } else { displayCritterTub(); } } else { displayStartScreen(); } } That's a very much simplified example. Yet even with only a fraction of all the rendering conditions visible, render is already starting to get out of hand. So, I dispense with that and try another idea: Approach 2: Under the Rug // "Each view object shall be responsible for its own rendering. // "I'll pass each object the program state, and each can render itself." startScreen.render(state); critterTub.render(state); critterList.render(state); In this setup, I've essentially just pushed those crazy nested conditions to a deeper level in the code, hiding them from view. In other words, startScreen.render would check state to see if it needed actually to be drawn or not, and take the correct action. But this seems more like it only solves a code-aesthetic problem. The third and final approach I'm considering that I'll share is the idea that I could invent my own "wheel" to take care of this. I'm envisioning a function that takes a data structure that defines what should happen at any given point in the render call -- revealing the conditions and dependencies as a kind of tree. Approach 3: Mad Scientist renderTree({ phases: ['startScreen', 'critterTub', 'endCredits'], dependencies: { startScreen: ['assetsLoaded'], critterTub: ['startScreenClicked'], critterList ['critterTubDisplayed'] // etc. }, exclusions: { startScreen: ['startScreenClicked'], // etc. } }); That seems kind of cool. I'm not exactly sure how it would actually work, but I can see it being a rather nifty way to express things, especially if I flex some of JavaScript's events. In any case, I'm a little bit stumped because I don't see an obvious way to do this. If you couldn't tell, I'm coming to this from the web development world, and finding that doing animation is a bit more exotic than arranging an MVC application for handling simple requests - responses. What is the clean, established solution to this common-I-would-think problem?

  Read the article

• Profiling NetBeans 7.0 Beta 2 and Reporting Problems

  - by christopher.jones

  With NetBeans 7.0 recently going into Beta 2 phase, now is the time to test it out properly and report issues. The development team has been squashing bugs, including memory issues with the PHP bundle.There are some great new PHP related features in NetBeans 7.0, so you know you want to try it out.If you identify something wrong with NetBeans, please report it following the guidelines http://wiki.netbeans.org/IssueReportingGuidelinesDepending on the issues, data to attach to the report is mentioned on: http://wiki.netbeans.org/FaqLogMessagesFile and http://wiki.netbeans.org/FaqProfileMeNowIf you have a memory issue then a memory dump would also be useful. Run the jmap tool for this. There is some background information on http://wiki.netbeans.org/FaqMemoryDump. Here's how I used it.First I set my environment to match the JDK used by NetBeans. In my case I am using a nightly build so the JDK is in the configuration file under $HOME/netbeans-dev-201102210501:$ egrep netbeans_jdkhome $HOME/netbeans-dev-201102210501/etc/netbeans.conf netbeans_jdkhome="/home/cjones/src/jdk1.6.0_24" $ export JAVA_HOME=/home/cjones/src/jdk1.6.0_24 $ export PATH=$JAVA_HOME/bin:$PATH Next, I found the correct process number to examine:$ ps -ef | egrep 'netbeans|jdk'cjones   23230     1  0 16:07 ?        00:00:00 /bin/bash /home/cjones/netbeans-cjones   23438 23230  2 16:07 ?        00:00:09 /home/cjones/src/jdk1.6.0_24/binFinally I used the parent JDK process as the jmap argument:$ jmap -histo:live 23438 num     #instances         #bytes  class name----------------------------------------------   1:         12075        9028656  [I   2:         49535        6581920  <constMethodKlass>   3:         49535        3964128  <methodKlass>   4:         80256        3840776  <symbolKlass>   5:         36093        3635336  [C   6:          5095        3341312  <constantPoolKlass>   7:          5095        2486016  <instanceKlassKlass>   8:          4325        1961432  <constantPoolCacheKlass>   9:         18729        1763976  [B  10:         59952        1438848  java.util.HashMap$Entry  . . .This histogram memory report will help identify the kind of memory issues you are seeing. It may not be as complete as an often tens of megabyte jmap -dump:live,file=/tmp/nbheap.log 23438 heap dump, but is much more easily attached to a bug report.If you want to keep up to date with NetBeans, nightly builds are at: http://bits.netbeans.org/download/trunk/nightly/latest/zip/

  Read the article

• World Backup Day

  - by red(at)work

  Here at Red Gate Towers, the SQL Backup development team have been hunkered down in their shed for the last few months, with the toolbox, blowtorch and chamois leather out, upgrading SQL Backup. When we started, autumn leaves were falling. Now we're about to finish, spring flowers are budding. If not quite a gleaming new machine, at the very least a familiar, reliable engine with some shiny new bits on it will trundle magnificently out of the workshop. One of the interesting things I've noticed about working on software development teams is that the team is together for so long 'implementing' stuff - designing, coding, testing, fixing bugs and so on - that you occasionally forget why you're doing what you're doing. Doubt creeps in. It feels like a long time since we launched this project in a fanfare of optimism and enthusiasm, and all that clarity of purpose and mission "yee-haw" has dissipated with the daily pressures of development. Every now and again, we look up from our bunker and notice all those thousands of users out there, with their different configurations and working practices and each with their own set of problems and requirements, and we ask ourselves "does anyone care about what we're doing?" Has the world moved on while we've been busy? Could we have been doing something more useful with the time and talent of all these excellent people we've assembled? In truth, you can research and test and validate all you like, but you never really know if you've done the right thing (or at least, something valuable for some users) until you release. All projects suffer this insecurity. If they don't, maybe you're not worrying enough about what you're building. The two enemies of software development are certainty and complacency. Oh, and of course, rival teams with Nerf guns. The goal of SQL Backup 7 is to make it so easy to schedule regular restores of your backups that you have no excuse not to. Why schedule a restore? Because your data is not as good as your last backup. It's only as good as your last successful restore. If you're not checking your backups by restoring them and running an integrity check on the database, you're only doing half the job. It seems that most DBAs know that this is best practice, but it can be tricky and time-consuming to set up, so it's one of those tasks that can get forgotten in the midst all the other demands on their time. Sometimes, they're just too busy firefighting. But if it was simple to do? That was our inspiration for SQL Backup 7. So it was heartening to read Brent Ozar's blog post the other day about World Backup Day. To be honest, I'd never heard of World Backup Day (Talk Like a Pirate Day, yes, but not this one); however, its emphasis on not just backing up your data but checking the validity of those backups was exactly the same message we had in mind when building SQL Backup 7. It's printed on a piece of A3 above our planning board - "Make backup verification so easy to do that no DBA has an excuse for not doing it" It's the missing piece that completes the puzzle. Simple idea, great concept, useful feature, but, as it turned out, far from straightforward to implement. The problem is the future. As Marty McFly discovered over the course of three movies, the future is uncertain and hard to predict - so when you are scheduling a restore to take place an hour, day, week or month after the backup, there are all kinds of questions that you wouldn't normally have to consider. Where will this backup live? Will it even exist at the time? Will it be split into multiple files? What will the file names be? Will it be encrypted? What files should it be restored to? SQL Backup needs to know what to expect at the time the restore job is actually run. Of course, a DBA will know the answer to all these questions, but to deliver the whole point of version 7, we wanted to make it easy for them to input that information into SQL Backup. We think we've done that. When you create your scheduled backup job, there is now an option to create a "reminder" to follow it up with a scheduled restore to verify the resulting backups. Actually, it's much more than a reminder, as it stores all the relevant data so you can click it and pre-populate the wizard with all the right settings to set up your verification restores. Simple. But, what do you think? We'd love you to try it. Post by Brian Harris

  Read the article

• My own personal use of Oracle Linux

  - by wcoekaer

  It always is easier to explain something with examples... Many people still don't seem to understand some of the convenient things around using Oracle Linux and since I personally (surprise!) use it at home, let me give you an idea. I have quite a few servers at home and I also have 2 hosted servers with a hosted provider. The servers at home I use mostly to play with random Linux related things, or with Oracle VM or just try out various new Oracle products to learn more. I like the technology, it's like a hobby really. To be able to have a good installation experience and use an officially certified Linux distribution and not waste time trying to find the right libraries, I, of course, use Oracle Linux. Now, at least I can get a copy of Oracle Linux for free (even if I was not working for Oracle) and I can/could use that on as many servers at home (or at my company if I worked elsewhere) for testing, development and production. I just go to http://edelivery.oracle.com/linux and download the version(s) I want and off I go. Now, I also have the right (and not because I am an employee) to take those images and put them on my own server and give them to someone else, I in fact, just recently set up my own mirror on my own hosted server. I don't have to remove oracle-logos, I don't have to rebuild the ISO images, I don't have to recompile anything, I can just put the whole binary distribution on my own server without contract. Perfectly free to do so. Of course the source code of all of this is there, I have a copy of the UEK code at home, just cloned from https://oss.oracle.com/git/?p=linux-2.6-unbreakable.git. And as you can see, the entire changelog, checkins, merges from Linus's tree, complete overview of everything that got changed from kernel to kernel, from patch to patch, errata to errata. No obfuscating, no tar balls and spending time with diff, or go read bug reports to find out what changed (seems silly to me). Some of my servers are on the external network and I need to be current with security errata, but guess what, no problem, my servers are hooked up to http://public-yum.oracle.com which is open, free, and completely up to date, in a consistent, reliable way with any errata, security or bugfix. So I have nothing to worry about. Also, not because I am an employee. Anyone can. And, with this, I also can, and have, set up my own mirror site that hosts these RPMs. both binary and source rpms. Because I am free to get them and distribute them. I am quite capable of supporting my servers on my own, so I don't need to rely on the support organization so I don't need to have a support subscription :-). So I don't need to pay. Neither would you, at least not with Oracle Linux. Another cool thing. The hosted servers came (unfortunately) with Centos installed. While Centos works just fine as is, I tend to prefer to be current with my security errata(reliably) and I prefer to just maintain one yum repository instead of 2, I converted them over to Oracle Linux as well (in place) so they happily receive and use the exact same RPMs. Since Oracle Linux is exactly the same from a user/application point of view as RHEL, including files like /etc/redhat-release and no changes from .el. to .centos. I know I have nothing to worry about installing one of the RHEL applications. So, OL everywhere makes my life a lot easier and why not... Next! Since I run Oracle VM and I have -tons- of VM's on my machines, in some cases on my big WOPR box I have 15-20 VMs running. Well, no problem, OL is free and I don't have to worry about counting the number of VMs, whether it's 1, or 4, or more than 10 ... like some other alternatives started doing... and finally :) I like to try out new stuff, not 3 year old stuff. So with UEK2 as part of OL6 (and 6.3 in particular) I can play with a 3.0.x based kernel and it just installs and runs perfectly clean with OL6, so quite current stuff in an environment that I know works, no need to toy around with an unsupported pre-alpha upstream distribution with libraries and versions that are not compatible with production software (I have nothing against ubuntu or fedora or opensuse... just not what I can rely on or use for what I need, and I don't need a desktop). pretty compelling. I say... and again, it doesn't matter that I work for Oracle, if I was working elsewhere, or not at all, all of the above would still apply. Student, teacher, developer, whatever. contrast this with $349 for 2 sockets and oneguest and selfsupport per year to even just get the software bits.

  Read the article

• Why won't USB 3.0 external hard drive run at USB 3.0 speeds?

  - by jgottula

  I recently purchased a PCI Express x1 USB 3.0 controller card (containing the NEC USB 3.0 controller) with the intent of using a USB 3.0 external hard drive with my Linux box. I installed the card in an empty PCIe slot on my motherboard, connected the card to a power cable, strung a USB 3.0 cable between one of the new ports and my external HDD, and connected the HDD to a wall socket for power. Booting the system, the drive works 100% as intended, with the one exception of throughput: rather than using SuperSpeed 4.8 Gbps connectivity, it seems to be falling back to High Speed 480 Mbps USB 2.0-style throughput. Disk Utility shows it as a 480 Mbps device, and running a couple Disk Utility and dd benchmarks confirms that the drive fails to exceed ~40 MB/s (the approximate limit of USB 2.0), despite it being an SSD capable of far more than that. When I connect my USB 3.0 HDD, dmesg shows this: [ 3923.280018] usb 3-2: new high speed USB device using ehci_hcd and address 6 where I would expect to find this: [ 3923.280018] usb 3-2: new SuperSpeed USB device using xhci_hcd and address 6 My system was running on kernel 2.6.35-25-generic at the time. Then, I stumbled upon this forum thread by an individual who found that a bug, which was present in kernels prior to 2.6.37-rc5, could be the culprit for this type of problem. Consequently, I installed the 2.6.37-generic mainline Ubuntu kernel to determine if the problem would go away. It didn't, so I tried 2.6.38-rc3-generic, and even the 2.6.38 nightly from 2010.02.01, to no avail. In short, I'm trying to determine why, with USB 3.0 support in the kernel, my USB 3.0 drive fails to run at full SuperSpeed throughput. See the comments under this question for additional details. Output that might be relevant to the problem (when booting from 2.6.38-rc3): Relevant lines from dmesg: [ 19.589491] xhci_hcd 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 19.589512] xhci_hcd 0000:03:00.0: setting latency timer to 64 [ 19.589516] xhci_hcd 0000:03:00.0: xHCI Host Controller [ 19.589623] xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 12 [ 19.650492] xhci_hcd 0000:03:00.0: irq 17, io mem 0xf8100000 [ 19.650556] xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X [ 19.650560] xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X [ 19.650563] xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X [ 19.653946] xHCI xhci_add_endpoint called for root hub [ 19.653948] xHCI xhci_check_bandwidth called for root hub Relevant section of sudo lspci -v: 03:00.0 USB Controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30) Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at f8100000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] #18 Kernel driver in use: xhci_hcd Kernel modules: xhci-hcd Relevant section of sudo lsusb -v: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 3.00 bDeviceClass 9 Hub bDeviceSubClass 0 Unused bDeviceProtocol 3 bMaxPacketSize0 9 idVendor 0x1d6b Linux Foundation idProduct 0x0003 3.0 root hub bcdDevice 2.06 iManufacturer 3 Linux 2.6.38-020638rc3-generic xhci_hcd iProduct 2 xHCI Host Controller iSerial 1 0000:03:00.0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 25 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0xe0 Self Powered Remote Wakeup MaxPower 0mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 1 bInterfaceClass 9 Hub bInterfaceSubClass 0 Unused bInterfaceProtocol 0 Full speed (or root) hub iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x81 EP 1 IN bmAttributes 3 Transfer Type Interrupt Synch Type None Usage Type Data wMaxPacketSize 0x0004 1x 4 bytes bInterval 12 Hub Descriptor: bLength 9 bDescriptorType 41 nNbrPorts 4 wHubCharacteristic 0x0009 Per-port power switching Per-port overcurrent protection TT think time 8 FS bits bPwrOn2PwrGood 10 * 2 milli seconds bHubContrCurrent 0 milli Ampere DeviceRemovable 0x00 PortPwrCtrlMask 0xff Hub Port Status: Port 1: 0000.0100 power Port 2: 0000.0100 power Port 3: 0000.0100 power Port 4: 0000.0100 power Device Status: 0x0003 Self Powered Remote Wakeup Enabled Full, non-verbose lsusb: Bus 012 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 010 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 009 Device 003: ID 04d9:0702 Holtek Semiconductor, Inc. Bus 009 Device 002: ID 046d:c068 Logitech, Inc. G500 Laser Mouse Bus 009 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 006: ID 174c:5106 ASMedia Technology Inc. Bus 003 Device 004: ID 0bda:0151 Realtek Semiconductor Corp. Mass Storage Device (Multicard Reader) Bus 003 Device 002: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 006: ID 1687:0163 Kingmax Digital Inc. Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 002: ID 046d:081b Logitech, Inc. Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Full output: full dmesg full lspci full lsusb

  Read the article

• qT quncompress gzip data

  - by talei

  Hello, I stumble upon a problem, and can't find a solution. So what I want to do is uncompress data in qt, using qUncompress(QByteArray), send from www in gzip format. I used wireshark to determine that this is valid gzip stream, also tested with zip/rar and both can uncompress it. Code so far, is like this: static const char dat[40] = { 0x1f, 0x8b, 0x08, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03, 0xaa, 0x2e, 0x2e, 0x49, 0x2c, 0x29, 0x2d, 0xb6, 0x4a, 0x4b, 0xcc, 0x29, 0x4e, 0xad, 0x05, 0x00, 0x00, 0x00, 0xff, 0xff, 0x03, 0x00, 0x2a, 0x63, 0x18, 0xc5, 0x0e, 0x00, 0x00, 0x00 }; //this data contains string: {status:false}, in gzip format QByteArray data; data.append( dat, sizeof(dat) ); unsigned int size = 14; //expected uncompresed size, reconstruct it BigEndianes //prepand expected uncompressed size, last 4 byte in dat 0x0e = 14 QByteArray dataPlusSize; dataPlusSize.append( (unsigned int)((size >> 24) & 0xFF)); dataPlusSize.append( (unsigned int)((size >> 16) & 0xFF)); dataPlusSize.append( (unsigned int)((size >> 8) & 0xFF)); dataPlusSize.append( (unsigned int)((size >> 0) & 0xFF)); QByteArray uncomp = qUncompress( dataPlusSize ); qDebug() << uncomp; And uncompression fails with: qUncompress: Z_DATA_ERROR: Input data is corrupted. AFAIK gzip consist of 10 byte header, DEFLATE peyload, 12 byte trailer ( 8 byte CRC32 + 4 byte ISIZE - uncompresed data size ). Striping header and trailer should leave me with DEFLATE data stream, qUncompress yields same error. I checked with data string compressed in PHP, like this: $stringData = gzcompress( "{status:false}", 1); and qUncompress uncompress that data.(I didn't see and gzip header though i.e. ID1 = 0x1f, ID2 = 0x8b ) I checked above code with debug, and error occurs at: if ( #endif ((BITS(8) << 8) + (hold >> 8)) % 31) { //here is error, WHY? long unsigned int hold = 35615 strm->msg = (char *)"incorrect header check"; state->mode = BAD; break; } inflate.c line 610. I know that qUncompress is simply a wrapper to zlib, so I suppose it should handle gzip without any problem. Any comments are more then welcome. Best regards

  Read the article

• [Wireless LAN]hostapd is giving error whwn running in target board

  - by Renjith G

  hi, I got the following error when i tried to run the hostapd command in my target board. Any idea about this? /etc # hostapd -dd hostapd.conf Configuration file: hostapd.conf madwifi_set_iface_flags: dev_up=0 madwifi_set_privacy: enabled=0 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=0 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=1 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=2 madwifi_del_key: addr=00:00:00:00:00:00 key_idx=3 Using interface ath0 with hwaddr 00:0b:6b:33:8c:30 and ssid '"RG_WLAN Testing Renjith G"' SSID - hexdump_ascii(len=27): 22 52 47 5f 57 4c 41 4e 20 54 65 73 74 69 6e 67 "RG_WLAN Testing 20 52 65 6e 6a 69 74 68 20 47 22 Renjith G" PSK (ASCII passphrase) - hexdump_ascii(len=12): 6d 79 70 61 73 73 70 68 72 61 73 65 mypassphrase PSK (from passphrase) - hexdump(len=32): 70 6f a6 92 da 9c a8 3b ff 36 85 76 f3 11 9c 5e 5d 4a 4b 79 f4 4e 18 f6 b1 b8 09 af 6c 9c 6c 21 madwifi_set_ieee8021x: enabled=1 madwifi_configure_wpa: group key cipher=1 madwifi_configure_wpa: pairwise key ciphers=0xa madwifi_configure_wpa: key management algorithms=0x2 madwifi_configure_wpa: rsn capabilities=0x0 madwifi_configure_wpa: enable WPA=0x1 WPA: group state machine entering state GTK_INIT (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=1 madwifi_set_privacy: enabled=1 madwifi_set_iface_flags: dev_up=1 ath0: Setup of interface done. l2_packet_receive - recvfrom: Network is down Wireless event: cmd=0x8b1a len=40 Register Fail Register Fail WPA: group state machine entering state SETKEYS (VLAN-ID 0) GMK - hexdump(len=32): [REMOVED] GTK - hexdump(len=32): [REMOVED] wpa_group_setkeys: GKeyDoneStations=0 WPA: group state machine entering state SETKEYSDONE (VLAN-ID 0) madwifi_set_key: alg=TKIP addr=00:00:00:00:00:00 key_idx=2 Signal 2 received - terminating Flushing old station entries madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=3 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 3) Could not connect to kernel driver. Deauthenticate all stations madwifi_sta_deauth: addr=ff:ff:ff:ff:ff:ff reason_code=2 ioctl[IEEE80211_IOCTL_SETMLME]: Invalid argument madwifi_sta_deauth: Failed to deauth STA (addr ff:ff:ff:ff:ff:ff reason 2) madwifi_set_privacy: enabled=0 madwifi_set_ieee8021x: enabled=0 madwifi_set_iface_flags: dev_up=0

  Read the article

• 'NoneType' object has no attribute 'get' error using SQLAlchemy

  - by Az

  I've been trying to map an object to a database using SQLAlchemy but have run into a snag. Version info if handy: [OS: Mac OSX 10.5.8 | Python: 2.6.4 | SQLAlchemy: 0.5.8] The class I'm going to map: class Student(object): def __init__(self, name, id): self.id = id self.name = name self.preferences = collections.defaultdict(set) self.allocated_project = None self.allocated_rank = 0 def __repr__(self): return str(self) def __str__(self): return "%s %s" %(self.id, self.name) Background: Now, I've got a function that reads in the necessary information from a text database into these objects. The function more or less works and I can easily access the information from the objects. Before the SQLAlchemy code runs, the function will read in the necessary info and store it into the Class. There is a dictionary called students which stores this as such: students = {} students[id] = Student(<all the info from the various "reader" functions>) Afterwards, there is an "allocation" algorithm that will allocate projects to student. It does that well enough. The allocated_project remains as None if a student is unsuccessful in getting a project. SQLAlchemy bit: So after all this happens, I'd like to map my object to a database table. Using the documentation, I've used the following code to only map certain bits. I also begin to create a Session. from sqlalchemy import * from sqlalchemy.orm import * engine = create_engine('sqlite:///:memory:', echo=False) metadata = MetaData() students_table = Table('studs', metadata, Column('id', Integer, primary_key=True), Column('name', String) ) metadata.create_all(engine) mapper(Student, students_table) Session = sessionmaker(bind=engine) sesh = Session() Now after that, I was curious to see if I could print out all the students from my students dictionary. for student in students.itervalues(): print student What do I get but an error: Traceback (most recent call last): File "~/FYP_Tests/FYP_Tests.py", line 140, in <module> print student File "/~FYP_Tests/Parties.py", line 30, in __str__ return "%s %s" %(self.id, self.name) File "/opt/local/Library/Frameworks/Python.framework/Versions/2.6/lib/python2.6/site-packages/SQLAlchemy-0.5.8-py2.6.egg/sqlalchemy/orm/attributes.py", line 158, in __get__ return self.impl.get(instance_state(instance), instance_dict(instance)) AttributeError: 'NoneType' object has no attribute 'get' I'm at a loss as to how to resolve this issue, if it is an issue. If more information is required, please ask and I will provide it.

  Read the article

• Can/should one disable namespace validation in Axis2 clients using ADB databinding?

  - by RJCantrell

  I have an document/literal Axis 1 service which I'm consuming with an Axis 2 client (ADB databinding, generated from WSDL2Java). It receives a valid XML response, but in parsing that XML, I get the error "Unexpected Subelement" for any type which doesn't have a namespace defined in the response. I can resolve the error by manually changing the (auto-generated by Axis2) type-validation line to only check the type name and not the namespace as well, but is there a non-manual way to skip this? This service is consumed properly by other Axis 1 clients. Here's the response, with bits in ALL CAPS having been anonymized. Some types have namespaces, some have empty-string namespaces, and some have none at all. Can I control this via the service's WSDL, or in Axis2's WSDL2Java handling of the WSDL? Is there a fundamental mismatch between Axis 1 and Axis2? The response below looks correct, except perhaps for where that type (anonymized as TWO below) is nested within itself. <?xml version="1.0" encoding="UTF-8"?> <soapenv:Envelope xmlns:soapenv="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <soapenv:Body> <SERVICENAMEResponse xmlns="http://service.PROJECT.COMPANY.com"> <SERVICENAMEReturn xmlns=""> <ONE></ONE> <TWO><TWO> <THREE>2</THREE> <FOUR>-10</FOUR> <FIVE>6</FIVE> <SIX>1</SIX> </TWO></TWO> <fileName></fileName> </SERVICENAMEReturn></SERVICENAMEResponse> </soapenv:Body></soapenv:Envelope> I did not have to modify the validation of the "SERVICENAMEResponse" object because it has the correct namespace specified, but I have to so for all its subelements. The manual modification that I can make (one per type) to fix this is to change: if (reader.isStartElement() && new javax.xml.namespace.QName("http://dto.PROJECT.COMPANY.com","ONE").equals(reader.getName())){ to: if (reader.isStartElement() && new javax.xml.namespace.QName("ONE").equals(reader.getName())){

  Read the article

• CGContextDrawPDFPage doesn't seem to persist in CGContext

  - by erichf

  I am trying to access the pixels of a CGContext written to with a PDF, but the bitmap buffer doesn't seem to update. Any help would be appreciated: //Get the reference to our current page pageRef = CGPDFDocumentGetPage(docRef, iCurrentPage); //Start with a media crop, but see if we can shrink to smaller crop CGRect pdfRect1 = CGRectIntegral(CGPDFPageGetBoxRect(pageRef, kCGPDFMediaBox)); CGRect r1 = CGRectIntegral(CGPDFPageGetBoxRect(pageRef, kCGPDFCropBox)); if (!CGRectIsEmpty(r1)) pdfRect1 = r1; int wide = pdfRect1.size.width + pdfRect1.origin.x; int high = pdfRect1.size.height + pdfRect1.origin.y; CGContextRef ctxBuffer = NULL; CGColorSpaceRef colorSpace; UInt8* bitmapData; int bitmapByteCount; int bitmapBytesPerRow; bitmapBytesPerRow = (wide * 4); bitmapByteCount = (bitmapBytesPerRow * high); colorSpace = CGColorSpaceCreateDeviceRGB(); bitmapData = malloc( bitmapByteCount ); if (bitmapData == NULL) { DebugLog (@"Memory not allocated!"); return; } ctxBuffer = CGBitmapContextCreate (bitmapData, wide, high, 8, // bits per component bitmapBytesPerRow, colorSpace, kCGImageAlphaPremultipliedLast | kCGBitmapByteOrder32Big); // if (ctxBuffer== NULL) { free (bitmapData); DebugLog (@"Context not created!"); return; } CGColorSpaceRelease( colorSpace ); //White out the current context CGContextSetRGBFillColor(ctxBuffer, 1.0, 1.0, 1.0, 1.0); CGContextFillRect(ctxBuffer, CGContextGetClipBoundingBox(ctxBuffer)); CGContextDrawPDFPage(ctxBuffer, pageRef); //!!!This displays just fine to the context passed in from - (void)drawLayer:(CALayer *)layer inContext:(CGContextRef)ctx. That is, I can see the PDf page rendered, so we know ctxBuffer was created correctly //However, if I view bitmapData in memory, it only shows as 0xFF (or whatever fill color I use) CGImageRef img = CGBitmapContextCreateImage(ctxBuffer); CGContextDrawImage(ctx, tiledLayer.frame, img); void *data = CGBitmapContextGetData (ctx); for (int i = 0; i < wide; i++) { for (int j = 0; j < high; j++) { //All of the bytes show as 0xFF (or whatever fill color I test with)?! int byteIndex = (j * 4) + i * 4; UInt8 red = bitmapData[byteIndex]; UInt8 green = bitmapData[byteIndex + 1]; UInt8 blue = bitmapData[byteIndex + 2]; UInt8 alpha = m_PixelBuf[byteIndex + 3]; } } I have also tried using CGDataProviderCopyData(CGImageGetDataProvider(img)) & CFDataGetBytePtr, but the results are the same?

  Read the article

• Add Silverlight Bing Maps Control to Windows Mobile 7 application

  - by Jacob

  I know the bits just came out today, but one of the first things I want to do with the newly released Windows Mobile 7 SDK is put a map up on the screen and mess around. I've downloaded the latest version of the Silverlight Maps Control and added the references to my application. As a matter of fact, the VS 2010 design view of the MainPage.xaml shows the map control after adding the namespace and placing the control. I'm using the provided VS 2010 Express version that comes with the Win Mobile 7 SDK and have just used the New Project - Windows Phone Application template. When I try to build I get two warnings related to the Microsoft.Maps.MapControl dll's. Warning 1 The primary reference "Microsoft.Maps.MapControl, Version=1.0.1.0, Culture=neutral, PublicKeyToken=498d0d22d7936b73, processorArchitecture=MSIL" could not be resolved because it has an indirect dependency on the framework assembly "System.Windows.Browser, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e" which could not be resolved in the currently targeted framework. "Silverlight,Version=v4.0,Profile=WindowsPhone". To resolve this problem, either remove the reference "Microsoft.Maps.MapControl, Version=1.0.1.0, Culture=neutral, PublicKeyToken=498d0d22d7936b73, processorArchitecture=MSIL" or retarget your application to a framework version which contains "System.Windows.Browser, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e". Warning 2 The primary reference "Microsoft.Maps.MapControl.Common, Version=1.0.1.0, Culture=neutral, PublicKeyToken=498d0d22d7936b73, processorArchitecture=MSIL" could not be resolved because it has an indirect dependency on the framework assembly "System.Windows.Browser, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e" which could not be resolved in the currently targeted framework. "Silverlight,Version=v4.0,Profile=WindowsPhone". To resolve this problem, either remove the reference "Microsoft.Maps.MapControl.Common, Version=1.0.1.0, Culture=neutral, PublicKeyToken=498d0d22d7936b73, processorArchitecture=MSIL" or retarget your application to a framework version which contains "System.Windows.Browser, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e". I'm leaning towards some way of adding the System.Windows.Browser to the targeted framework version. But I'm not even sure if that is possible. To be more specific; I'm looking for a way to get the Silverlight Maps Control up on a Windows Phone 7 series application. If possible. Thanks.

  Read the article

• How to use c++0x thread in Android NDK?

  - by m-ric

  I am trying to compile this simple program with android-ndk-r8b: jni/hello_jni.cpp #include <iostream> #include <thread> void hello() { std::cout << "Hi i'm a thread!!!" << std::endl; } int main() { std::thread th(hello); th.join(); return 0; } jni/Application.mk APP_OPTIM := release APP_MODULES := hello_thread APP_STL := gnustl_static jni/Android.mk LOCAL_PATH := $(call my-dir) include $(CLEAR_VARS) LOCAL_CPPFLAGS += -std=c++0x -frtti LOCAL_MODULE := hello_thread LOCAL_LDLIBS := -L$(SYSROOT)/usr/lib -pthread LOCAL_SRC_FILES := hello_thread.cpp include $(BUILD_EXECUTABLE) ndk-build returns me an error arguin that 'thread' is not a member of 'std'. I issued ndk-build -n to get the compilation command and issued it alone in my shell: /home/evigier/android-ndk-r8b/toolchains/arm-linux-androideabi-4.6/prebuilt/linux-x86/bin/arm-linux-androideabi-g++ -MMD -MP -MF /home/evigier/eclipse_workspace/hello_thread/obj/local/armeabi/objs/hello_thread/hello_thread.o.d -fpic -ffunction-sections -funwind-tables -fstack-protector -D__ARM_ARCH_5__ -D__ARM_ARCH_5T__ -D__ARM_ARCH_5E__ -D__ARM_ARCH_5TE__ -march=armv5te -mtune=xscale -msoft-float -fno-exceptions -fno-rtti -mthumb -Os -fomit-frame-pointer -fno-strict-aliasing -finline-limit=64 -I/home/evigier/android-ndk-r8b/sources/cxx-stl/gnu-libstdc++/4.6/include -I/home/evigier/android-ndk-r8b/sources/cxx-stl/gnu-libstdc++/4.6/libs/armeabi/include -I/home/evigier/eclipse_workspace/hello_thread/jni -DANDROID -Wa,--noexecstack -std=c++0x -frtti -O2 -DNDEBUG -g -I/home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr/include -c /home/evigier/eclipse_workspace/hello_thread/jni/hello_thread.cpp -o /home/evigier/eclipse_workspace/hello_thread/obj/local/armeabi/objs/hello_thread/hello_thread.o Compile++ thumb : hello_thread <= hello_thread.cpp In file included from /home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr/include/stdio.h:55:0, from /home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr/include/wchar.h:33, from /home/evigier/android-ndk-r8b/sources/cxx-stl/gnu-libstdc++/4.6/include/cwchar:46, from /home/evigier/android-ndk-r8b/sources/cxx-stl/gnu-libstdc++/4.6/include/bits/postypes.h:42, from /home/evigier/android-ndk-r8b/sources/cxx-stl/gnu-libstdc++/4.6/include/iosfwd:42, from /home/evigier/android-ndk-r8b/sources/cxx-stl/gnu-libstdc++/4.6/include/ios:39, from /home/evigier/android-ndk-r8b/sources/cxx-stl/gnu-libstdc++/4.6/include/ostream:40, from /home/evigier/android-ndk-r8b/sources/cxx-stl/gnu-libstdc++/4.6/include/iostream:40, from jni/hello_thread.cpp:4: /home/evigier/android-ndk-r8b/platforms/android-14/arch-arm/usr/include/sys/types.h:124:9: error: 'uint64_t' does not name a type /home/evigier/eclipse_workspace/hello_thread/jni/hello_thread.cpp: In function 'int main()': /home/evigier/eclipse_workspace/hello_thread/jni/hello_thread.cpp:14:5: error: 'thread' is not a member of 'std' /home/evigier/eclipse_workspace/hello_thread/jni/hello_thread.cpp:14:17: error: expected ';' before 'th' /home/evigier/eclipse_workspace/hello_thread/jni/hello_thread.cpp:15:5: error: 'th' was not declared in this scope I read a lot of threads/questions about POSIX threads and C++ threads, but still cannot find my answer. My arm-linux-androideabi/include/c++/4.6/thread file defines class thread in std only: #if defined(_GLIBCXX_HAS_GTHREADS) && defined(_GLIBCXX_USE_C99_STDINT_TR1) They don't seem to be defined in my sdk (c++config.h). But how can I possibly turn them on safely? Do i need to compile my own toolchain to use (non-p)threads? My host computer is : Linux evigier-ThinkPad-X220 3.0.0-17-generic #30-Ubuntu SMP Thu Mar 8 20:45:39 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux

  Read the article

• Union struct produces garbage and general question about struct nomenclature

  - by SoulBeaver

  I read about unions the other day( today ) and tried the sample functions that came with them. Easy enough, but the result was clear and utter garbage. The first example is: union Test { int Int; struct { char byte1; char byte2; char byte3; char byte4; } Bytes; }; where an int is assumed to have 32 bits. After I set a value Test t; t.Int = 7; and then cout cout << t.Bytes.byte1 << etc... the individual bytes, there is nothing displayed, but my computer beeps. Which is fairly odd I guess. The second example gave me even worse results. union SwitchEndian { unsigned short word; struct { unsigned char hi; unsigned char lo; } data; } Switcher; Looks a little wonky in my opinion. Anyway, from the description it says, this should automatically store the result in a high/little endian format when I set the value like Switcher.word = 7656; and calling with cout << Switcher.data.hi << endl The result of this were symbols not even defined in the ASCII chart. Not sure why those are showing up. Finally, I had an error when I tried correcting the example by, instead of placing Bytes at the end of the struct, positioning it right next to it. So instead of struct {} Bytes; I wanted to write struct Bytes {}; This tossed me a big ol' error. What's the difference between these? Since C++ cannot have unnamed structs it seemed, at the time, pretty obvious that the Bytes positioned at the beginning and at the end are the things that name it. Except no, that's not the entire answer I guess. What is it then?

  Read the article

• Cannot add Silverlight Maps Control to Windows Mobile 7 application

  - by Jacob

  I know the bits just came out today, but one of the first things I want to do with the newly released Windows Mobile 7 SDK is put a map up on the screen and mess around. I've downloaded the latest version of the Silverlight Maps Control and added the references to my application. As a matter of fact, the VS 2010 design view of the MainPage.xaml shows the map control after adding the namespace and placing the control. I'm using the provided VS 2010 Express version that comes with the Win Mobile 7 SDK and have just used the New Project - Windows Phone Application template. When I try to build I get two warnings related to the Microsoft.Maps.MapControl dll's. Warning 1 The primary reference "Microsoft.Maps.MapControl, Version=1.0.1.0, Culture=neutral, PublicKeyToken=498d0d22d7936b73, processorArchitecture=MSIL" could not be resolved because it has an indirect dependency on the framework assembly "System.Windows.Browser, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e" which could not be resolved in the currently targeted framework. "Silverlight,Version=v4.0,Profile=WindowsPhone". To resolve this problem, either remove the reference "Microsoft.Maps.MapControl, Version=1.0.1.0, Culture=neutral, PublicKeyToken=498d0d22d7936b73, processorArchitecture=MSIL" or retarget your application to a framework version which contains "System.Windows.Browser, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e". Warning 2 The primary reference "Microsoft.Maps.MapControl.Common, Version=1.0.1.0, Culture=neutral, PublicKeyToken=498d0d22d7936b73, processorArchitecture=MSIL" could not be resolved because it has an indirect dependency on the framework assembly "System.Windows.Browser, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e" which could not be resolved in the currently targeted framework. "Silverlight,Version=v4.0,Profile=WindowsPhone". To resolve this problem, either remove the reference "Microsoft.Maps.MapControl.Common, Version=1.0.1.0, Culture=neutral, PublicKeyToken=498d0d22d7936b73, processorArchitecture=MSIL" or retarget your application to a framework version which contains "System.Windows.Browser, Version=2.0.5.0, Culture=neutral, PublicKeyToken=7cec85d7bea7798e". I'm leaning towards some way of adding the System.Windows.Browser to the targeted framework version. But I'm not even sure if that is possible. To be more specific; I'm looking for a way to get the Silverlight Maps Control up on a Windows Phone 7 series application. If possible. Thanks.

  Read the article

• What should I do or don't do to avoid Delphi "push dword" bug.

  - by Maksee

  I found that Delphi 5 generates invalid assembly code in specific cases. I can't understand in what cases in general. The example below produces access violation since a very strange optimization occurs. For a byte in a record or array Delphi generates push dword [...], pop ebx, mov .., bl that works correctly if there are data after this byte (we need at least three to push dword correctly), but fails if the data is inaccessible. I emulated the strict boundaries here with win32 Virtual* functions Specifically the error occurs when the last byte from the block accessed inside FeedBytesToClass procedure. And if I try to change something like using data array instead of object property of remove actionFlag variable, Delphi generates correct assembly instructions. const BlockSize = 4096; type TSomeClass = class private fBytes: PByteArray; public property Bytes: PByteArray read fBytes; constructor Create; destructor Destroy;override; end; constructor TSomeClass.Create; begin inherited Create; GetMem(fBytes, BlockSize); end; destructor TSomeClass.Destroy; begin FreeMem(fBytes); inherited; end; procedure FeedBytesToClass(SrcDataBytes: PByteArray; Count: integer); var j: integer; Ofs: integer; actionFlag: boolean; AClass: TSomeClass; begin AClass:=TSomeClass.Create; try actionFlag:=true; for j:=0 to Count-1 do begin Ofs:=j; if actionFlag then begin AClass.Bytes[Ofs]:=SrcDataBytes[j]; end; end; finally AClass.Free; end; end; procedure TForm31.Button1Click(Sender: TObject); var SrcDataBytes: PByteArray; begin SrcDataBytes:=VirtualAlloc(Nil, BlockSize, MEM_COMMIT, PAGE_READWRITE); try if VirtualLock(SrcDataBytes, BlockSize) then try FeedBytesToClass(SrcDataBytes, BlockSize); finally VirtualUnLock(SrcDataBytes, BlockSize); end; finally VirtualFree(SrcDataBytes, MEM_DECOMMIT, BlockSize); end; end; Initially the error occured when I used access to RGB data of bitmap bits, but the code there is too complex so I narrowed it to this fragment. So the question is what is here so specific that makes Delphi produce push,pop,mov optimization. I need to know this in order to avoid such side effects in general.

  Read the article

• compile AMR-nb codec with RVCT for WinCE/Window Mobile

  - by pps

  Hello everybody, I'm working on amr speech codec (porting/optimization) I have an arm (for WinCE) optimized version from voiceage and I use it as a reference in performance testing. So far, binary produced with my lib beats the other one by around 20-30%! I use Vs2008 and I have limited access to ARM instruction set I can generate with Microsoft compiler. So I tried to look for alternative compiler to see what would be performance difference. I have RVCT compiler, but it produces elf binaries/object files. However, I run my test on a wince mobile phone (TyTn 2) so I need to find a way to run code compiled with RVCT on WinCE. Some of the options are 1) to produce assembly listing (-S option of armcc), and try to assemble with some other assembler that can create COFF (MS assembler for arm) 2) compile and convert generated ELF object file to COFF object (seems like objcopy of gnu binutils could help me with that) 3) using fromelf utility supplied by RVCT create BIN file and somehow try to mangle the bits so I can execute them ;) My first attempt is to create a simple c++ file with one exported function, compile it with RVCT and then try to run that function on the smartphone. The emitted assembly cannot be assembled by the ms assembler (not only they are not compatible, but also ms assembler rejects some of the instructions generated with RVCT compiler; ASR opcode in my case) Then I tried to convert ELF object to coff format and I can't find any information on that. There is a gcc port for ce and objcopy from that toolset is supposed to be able to do the task. However, I can't get it working. I tried different switches, but I have no idea what exactly I need to specify as bfdname for input and output format. So, I couldn't get it working either. Dumping with fromelf and using generated bin file seems to be overkill, so I decided to ask you guys if there is anything I should try to do or maybe someone has already done similar task and could help me. Basically, all I want to do is to compile my code with RVCT compiler and see what's the performance difference. My code has zero dependencies on any c runtime functions. thanks!

  Read the article

• Install Trac on 64bits Windows 7

  - by Tufo

  I'm configuring a new Developing Server that came with Windows 7 64bits. It must have installed Trac with Subversion integration. I install Subversion with VisualSVN 2.1.1, clients with TortoiseSVN 1.6.7 and AnkhSVN 2.1.7 for Visual Studio 2008 SP1 integration. All works fine! my problem begun when going to Trac installation. I install python 2.6 all fine. Trac hasn't a x64 windows installer, so I installed it manually by compiling it with python console (C:\Python26\python.exe C:/TRAC/setup.py install). After that, I can create TRAC projects normally, the Trac core is working fine. And so the problem begins, lets take a look at the Trac INSTALL file: Requirements To install Trac, the following software packages must be installed: Python, version = 2.3. Subversion, version = 1.0. (= 1.1.xrecommended) Subversion SWIG Python bindings (not PySVN). PySQLite,version 1.x (for SQLite 2.x) or version 2.x (for SQLite 3.x) Clearsilver, version = 0.9.3 (0.9.14 recommended) Python: OK Subverion: OK Subversion SWIG Python bindings (not PySVN): Here I face the first issue, he asks me for 'cd' to the swig directory and run the 'configure' file, and the result is: C:\swigwin-1.3.40> c:\python26\python.exe configure File "configure", line 16 DUALCASE=1; export DUALCASE # for MKS sh ^ SyntaxError: invalid syntax PySQLite, version 1.x (for SQLite 2.x) or version 2.x (for SQLite 3.x): Don't need, as Python 2.6 comes with SQLLite Clearsilver, version = 0.9.3 (0.9.14 recommended): Second issue, Clearsilver only has 32bit installer wich does not recognize python installation (as registry keys are in different places from 32 to 64 bits). So I try to manually install it with python console. It returns me a error of the same kind as SWIG: C:\clearsilver-0.10.5>C:\python26\python.exe ./configure File "./configure", line 13 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ^ SyntaxError: invalid syntax When I simulate a web server using the "TRACD" command, it runs fine when I disable svn support but when I try to open the web page it shows me a error regarding ClearSilver is not installed for generating the html content. AND (for making me more happy) This TRAC will run over IIS7, I mustn't install Apache... I'm nearly crazy with this issue... HELP!!!

  Read the article

• Grails Liferay portlet not invoking action

  - by RJ Regenold

  I am trying to create a simple portlet for Liferay 5.2.2 using Grails 1.2.1 with the grails-portlets 0.7 and grails-portlets-liferay 0.2 plugins. I created and deployed a stock portlet (just updated title, description, etc...). It deploys correctly and the view renders correctly. However, when I submit the default form that is in view.gsp it never hits the actionView function. Here are the relevant code bits: SearchPortlet.groovy class SearchPortlet { def title = 'Search' def description = ''' A simple search portlet. ''' def displayName = 'Search' def supports = ['text/html':['view', 'edit', 'help']] // Liferay server specific configurations def liferay_display_category = 'Category' def actionView = { println "In action view" } def renderView = { println "In render view" //TODO Define render phase. Return the map of the variables bound to the view ['mykey':'myvalue'] } ... } view.gsp <%@ taglib uri="http://java.sun.com/portlet" prefix="portlet" %> <div> <h1>View Page</h1> The map returned by renderView is passed in. Value of mykey: ${mykey} <form action="${portletResponse.createActionURL()}"> <input type="submit" value="Submit"/> </form> </div> The tomcat terminal prints In render view whenever I view the portlet, and after I press the submit button. It never prints the In action view statement. Any ideas? Update I turned on logging and this is what I see whenever I click the submit button in the portlet: [localhost].[/gportlet] - servletPath=/Search, pathInfo=/invoke, queryString=null, name=null [localhost].[/gportlet] - Path Based Include portlets.GrailsDispatcherPortlet - DispatcherPortlet with name 'Search' received render request portlets.GrailsDispatcherPortlet - Bound render request context to thread: com.liferay.portlet.RenderRequestImpl@7a158e portlets.GrailsDispatcherPortlet - Testing handler map [org.codehaus.grails.portlets.GrailsPortletHandlerMapping@1f06283] in DispatcherPortlet with name 'Search' portlets.GrailsDispatcherPortlet - Testing handler adapter [org.codehaus.grails.portlets.GrailsPortletHandlerAdapter@74f72b] portlets.GrailsPortletHandlerAdapter - portlet.handleMinimised not set, proceeding with normal render portlet.SearchPortlet - In render view portlets.GrailsPortletHandlerAdapter - Couldn't resolve action view /search/null.gsp portlets.GrailsPortletHandlerAdapter - Trying to render mode view /search/view.gsp portlets.GrailsDispatcherPortlet - Setting portlet response content type to view-determined type [text/html;charset=ISO-8859-1] [localhost].[/gportlet] - servletPath=/WEB-INF/servlet/view, pathInfo=null, queryString=null, name=null [localhost].[/gportlet] - Path Based Include portlets.GrailsDispatcherPortlet - Cleared thread-bound render request context: com.liferay.portlet.RenderRequestImpl@7a158e portlets.GrailsDispatcherPortlet - Successfully completed request The fourth line in that log snippet says Bound render request..., which I don't understand because the action in the form that is in the portlet is to the action url. I would've thought that should be an action request.

  Read the article

• What Causes Boost Asio to Crash Like This?

  - by Scott Lawson

  My program appears to run just fine most of the time, but occasionally I get a segmentation fault. boost version = 1.41.0 running on RHEL 4 compiled with GCC 3.4.6 Backtrace: #0 0x08138546 in boost::asio::detail::posix_fd_set_adapter::is_set (this=0xb74ed020, descriptor=-1) at /home/scottl/boost_1_41_0/boost/asio/detail/posix_fd_set_adapter.hpp:57 __result = -1 'ÿ' #1 0x0813e1b0 in boost::asio::detail::reactor_op_queue::perform_operations_for_descriptors (this=0x97f3b6c, descriptors=@0xb74ed020, result=@0xb74ecec8) at /home/scottl/boost_1_41_0/boost/asio/detail/reactor_op_queue.hpp:204 op_iter = {_M_node = 0xb4169aa0} i = {_M_node = 0x97f3b74} #2 0x081382ca in boost::asio::detail::select_reactor::run (this=0x97f3b08, block=true) at /home/scottl/boost_1_41_0/boost/asio/detail/select_reactor.hpp:388 read_fds = {fd_set_ = {fds_bits = {16, 0 }}, max_descriptor_ = 65} write_fds = {fd_set_ = {fds_bits = {0 }}, max_descriptor_ = -1} retval = 1 lock = { = {}, mutex_ = @0x97f3b1c, locked_ = true} except_fds = {fd_set_ = {fds_bits = {0 }}, max_descriptor_ = -1} max_fd = 65 tv_buf = {tv_sec = 0, tv_usec = 710000} tv = (timeval *) 0xb74ecf88 ec = {m_val = 0, m_cat = 0x81f2c24} sb = { = {}, blocked_ = true, old_mask_ = {__val = {0, 0, 134590223, 3075395548, 3075395548, 3075395464, 134729792, 3075395360, 135890240, 3075395368, 134593920, 3075395544, 135890240, 3075395384, 134599542, 3020998404, 135890240, 3075395400, 134614095, 3075395544, 4, 3075395416, 134548135, 3021172996, 4294967295, 3075395432, 134692921, 3075395504, 0, 3075395448, 134548107, 3021172992}}} #3 0x0812eb45 in boost::asio::detail::task_io_service ::do_one (this=0x97f3a70, lock=@0xb74ed230, this_idle_thread=0xb74ed240, ec=@0xb74ed2c0) at /home/scottl/boost_1_41_0/boost/asio/detail/task_io_service.hpp:260 more_handlers = false c = {lock_ = @0xb74ed230, task_io_service_ = @0x97f3a70} h = (boost::asio::detail::handler_queue::handler *) 0x97f3aa0 polling = false task_has_run = true #4 0x0812765f in boost::asio::detail::task_io_service ::run (this=0x97f3a70, ec=@0xb74ed2c0) at /home/scottl/boost_1_41_0/boost/asio/detail/task_io_service.hpp:103 ctx = { = {}, owner_ = 0x97f3a70, next_ = 0x0} this_idle_thread = {wakeup_event = { = {}, cond_ = {__c_lock = { __status = 0, __spinlock = 22446}, __c_waiting = 0x2bd7, __padding = "\000\000\000\000×+\000\000\000\000\000\000×+\000\000\000\000\000\000\204:\177\t\000\000\000", __align = 0}, signalled_ = true}, next = 0x0} lock = { = {}, mutex_ = @0x97f3a84, locked_ = false} n = 11420 #5 0x08125e99 in boost::asio::io_service::run (this=0x97ebbcc) at /home/scottl/boost_1_41_0/boost/asio/impl/io_service.ipp:58 ec = {m_val = 0, m_cat = 0x81f2c24} s = 8 #6 0x08154424 in boost::_mfi::mf0::operator() (this=0x9800870, p=0x97ebbcc) at /home/scottl/boost_1_41_0/boost/bind/mem_fn_template.hpp:49 No locals. #7 0x08154331 in boost::_bi::list1 ::operator(), boost::_bi::list0 (this=0x9800878, f=@0x9800870, a=@0xb74ed337) at /home/scottl/boost_1_41_0/boost/bind/bind.hpp:236 No locals. #8 0x081541e5 in boost::_bi::bind_t, boost::_bi::list1 ::operator() (this=0x9800870) at /home/scottl/boost_1_41_0/boost/bind/bind_template.hpp:20 a = {} #9 0x08154075 in boost::detail::thread_data, boost::_bi::list1 ::run (this=0x98007a0) at /home/scottl/boost_1_41_0/boost/thread/detail/thread.hpp:56 No locals. #10 0x0816fefd in thread_proxy () at /usr/lib/gcc/i386-redhat-linux/3.4.6/../../../../include/c++/3.4.6/bits/locale_facets.tcc:2443 __ioinit = {static _S_refcount = , static _S_synced_with_stdio = } ---Type to continue, or q to quit--- typeinfo for common::RuntimeException = {} typeinfo name for common::RuntimeException = "N6common16RuntimeExceptionE" #11 0x00af23cc in start_thread () from /lib/tls/libpthread.so.0 No symbol table info available. #12 0x00a5c96e in __init_misc () from /lib/tls/libc.so.6 No symbol table info available.

  Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >