Search Results

Search found 10756 results on 431 pages for 'zend controller'.

Page 88/431 | < Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >

  • Lots of Failure Alerts on my DC

    - by Param
    I am receiving lots of Failure Audit logs on my DC, can you guide me - how should i identify the culprit. Please see the below print-screen for more detail. The logon type is 3, that means it is a network logon. I have identify the Workstation from the log, but how should i prove who or which process is sending broadcast with logon authentication to my DC. The Anti-virus is also updated. Note:- The Workstation is in Workgroup.

    Read the article

  • NEC uPD720200 USB 3.0 not working on Ubuntu 12.04

    - by Jagged
    I've recently installed Ubuntu 12.04 64-bit on a HP Envy 15 1104tx. Most stuff appears to be working fine with the exception of the two USB3 ports (USB2 port works fine). I've read a lot of articles but so far have not been able to find a solution. I've tried adding 'pci=nomsi' to '/etc/default/grub' but this made no difference. Some articles suggest booting into Windows and upgrading the firmware on the uPD720200. Any body had any experience of this? Is there a way I can checked the firmware version of the NEC uPD720200 in Linux to see if there is an update available? Any help appreciated. uname -a: Linux HP-ENVY-15-1104tx 3.2.0-26-generic #41-Ubuntu SMP Thu Jun 14 17:49:24 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux lshw: hp-envy-15-1104tx description: Notebook product: HP ENVY 15 Notebook PC (WF591PA#ABG) vendor: Hewlett-Packard version: 0492110000241910001420000 serial: CNF0301C79 width: 64 bits capabilities: smbios-2.6 dmi-2.6 vsyscall32 configuration: boot=normal chassis=notebook family=103C_5335KV sku=WF591PA#ABG uuid=434E4630-3330-3143-3739-60EB6906688F *-core description: Motherboard product: 1522 vendor: Hewlett-Packard physical id: 0 version: 36.35 serial: CNF0301C79 slot: Base Board Chassis Location *-firmware description: BIOS vendor: Hewlett-Packard physical id: 0 version: F.2B date: 10/12/2010 size: 1MiB capacity: 1472KiB capabilities: pci upgrade shadowing cdboot bootselect edd int13floppynec int13floppytoshiba int13floppy360 int13floppy1200 int13floppy720 int13floppy2880 int9keyboard int10video acpi usb biosbootspecification *-memory description: System Memory physical id: 13 slot: System board or motherboard size: 16GiB *-bank:0 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 0 serial: E13C4316 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:1 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 1 serial: E03C3E16 slot: Bottom size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:2 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 2 serial: 672279CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-bank:3 description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns) product: 9905428-043.A00LF physical id: 3 serial: 652286CC slot: On Board size: 4GiB width: 64 bits clock: 1333MHz (0.8ns) *-cpu description: CPU product: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz vendor: Intel Corp. physical id: 1d bus info: cpu@0 version: Intel(R) Core(TM) i7 CPU Q 820 @ 1.73GHz slot: CPU size: 1199MHz capacity: 1199MHz width: 64 bits clock: 1066MHz capabilities: x86-64 fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp constant_tsc arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc aperfmperf pni dtes64 monitor ds_cpl vmx smx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 popcnt lahf_lm ida tpr_shadow vnmi flexpriority ept vpid cpufreq configuration: cores=4 enabledcores=4 threads=8 *-cache:0 description: L3 cache physical id: 1e slot: L3 Cache size: 8MiB capacity: 8MiB capabilities: synchronous internal write-through unified *-cache:1 description: L2 cache physical id: 20 slot: L2 Cache size: 256KiB capacity: 256KiB capabilities: synchronous internal write-through unified *-cache:2 description: L1 cache physical id: 21 slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through instruction *-cache description: L1 cache physical id: 1f slot: L1 Cache size: 32KiB capacity: 32KiB capabilities: synchronous internal write-through data *-pci:0 description: Host bridge product: Core Processor DMI vendor: Intel Corporation physical id: 100 bus info: pci@0000:00:00.0 version: 11 width: 32 bits clock: 33MHz *-pci:0 description: PCI bridge product: Core Processor PCI Express Root Port 1 vendor: Intel Corporation physical id: 3 bus info: pci@0000:00:03.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:4000(size=4096) memory:d4100000-d41fffff ioport:c0000000(size=268435456) *-display description: VGA compatible controller product: Broadway PRO [Mobility Radeon HD 5800 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0 bus info: pci@0000:01:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi vga_controller bus_master cap_list rom configuration: driver=fglrx_pci latency=0 resources: irq:58 memory:c0000000-cfffffff memory:d4100000-d411ffff ioport:4000(size=256) memory:d4140000-d415ffff *-multimedia description: Audio device product: Juniper HDMI Audio [Radeon HD 5700 Series] vendor: Hynix Semiconductor (Hyundai Electronics) physical id: 0.1 bus info: pci@0000:01:00.1 version: 00 width: 64 bits clock: 33MHz capabilities: pm pciexpress msi bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:56 memory:d4120000-d4123fff *-pci:1 description: PCI bridge product: Core Processor PCI Express Root Port 3 vendor: Intel Corporation physical id: 5 bus info: pci@0000:00:05.0 version: 11 width: 32 bits clock: 33MHz capabilities: pci msi pciexpress pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 memory:d4000000-d40fffff *-usb description: USB controller product: uPD720200 USB 3.0 Host Controller vendor: NEC Corporation physical id: 0 bus info: pci@0000:02:00.0 version: 03 width: 64 bits clock: 33MHz capabilities: pm msi msix pciexpress xhci bus_master cap_list configuration: driver=xhci_hcd latency=0 resources: irq:16 memory:d4000000-d4001fff *-generic:0 UNCLAIMED description: System peripheral product: Core Processor System Management Registers vendor: Intel Corporation physical id: 8 bus info: pci@0000:00:08.0 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:1 UNCLAIMED description: System peripheral product: Core Processor Semaphore and Scratchpad Registers vendor: Intel Corporation physical id: 8.1 bus info: pci@0000:00:08.1 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:2 UNCLAIMED description: System peripheral product: Core Processor System Control and Status Registers vendor: Intel Corporation physical id: 8.2 bus info: pci@0000:00:08.2 version: 11 width: 32 bits clock: 33MHz capabilities: pciexpress cap_list configuration: latency=0 *-generic:3 UNCLAIMED description: System peripheral product: Core Processor Miscellaneous Registers vendor: Intel Corporation physical id: 8.3 bus info: pci@0000:00:08.3 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:4 UNCLAIMED description: System peripheral product: Core Processor QPI Link vendor: Intel Corporation physical id: 10 bus info: pci@0000:00:10.0 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-generic:5 UNCLAIMED description: System peripheral product: Core Processor QPI Routing and Protocol Registers vendor: Intel Corporation physical id: 10.1 bus info: pci@0000:00:10.1 version: 11 width: 32 bits clock: 33MHz configuration: latency=0 *-multimedia description: Audio device product: 5 Series/3400 Series Chipset High Definition Audio vendor: Intel Corporation physical id: 1b bus info: pci@0000:00:1b.0 version: 05 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: driver=snd_hda_intel latency=0 resources: irq:55 memory:d4200000-d4203fff *-pci:2 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 1 vendor: Intel Corporation physical id: 1c bus info: pci@0000:00:1c.0 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:17 ioport:3000(size=4096) memory:d3000000-d3ffffff ioport:d0000000(size=16777216) *-network description: Wireless interface product: Centrino Advanced-N 6200 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 35 serial: 00:27:10:40:e4:68 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlwifi driverversion=3.2.0-26-generic firmware=9.221.4.1 build 25532 latency=0 link=no multicast=yes wireless=IEEE 802.11abgn resources: irq:54 memory:d3000000-d3001fff *-pci:3 description: PCI bridge product: 5 Series/3400 Series Chipset PCI Express Root Port 2 vendor: Intel Corporation physical id: 1c.1 bus info: pci@0000:00:1c.1 version: 05 width: 32 bits clock: 33MHz capabilities: pci pciexpress msi pm normal_decode bus_master cap_list configuration: driver=pcieport resources: irq:16 ioport:2000(size=4096) memory:d2000000-d2ffffff ioport:d1000000(size=16777216) *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications Inc. physical id: 0 bus info: pci@0000:04:00.0 logical name: eth0 version: c0 serial: 60:eb:69:06:68:8f size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=10.161.0.147 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:57 memory:d2000000-d203ffff ioport:2000(size=128) *-usb description: USB controller product: 5 Series/3400 Series Chipset USB2 Enhanced Host Controller vendor: Intel Corporation physical id: 1d bus info: pci@0000:00:1d.0 version: 05 width: 32 bits clock: 33MHz capabilities: pm debug ehci bus_master cap_list configuration: driver=ehci_hcd latency=0 resources: irq:20 memory:d4205800-d4205bff *-pci:4 description: PCI bridge product: 82801 Mobile PCI Bridge vendor: Intel Corporation physical id: 1e bus info: pci@0000:00:1e.0 version: a5 width: 32 bits clock: 33MHz capabilities: pci subtractive_decode bus_master cap_list *-isa description: ISA bridge product: Mobile 5 Series Chipset LPC Interface Controller vendor: Intel Corporation physical id: 1f bus info: pci@0000:00:1f.0 version: 05 width: 32 bits clock: 33MHz capabilities: isa bus_master cap_list configuration: latency=0 *-storage description: RAID bus controller product: 82801 Mobile SATA Controller [RAID mode] vendor: Intel Corporation physical id: 1f.2 bus info: pci@0000:00:1f.2 logical name: scsi0 version: 05 width: 32 bits clock: 66MHz capabilities: storage msi pm bus_master cap_list emulated configuration: driver=ahci latency=0 resources: irq:45 ioport:5048(size=8) ioport:5054(size=4) ioport:5040(size=8) ioport:5050(size=4) ioport:5020(size=32) memory:d4205000-d42057ff *-disk description: ATA Disk product: OCZ-VERTEX3 physical id: 0.0.0 bus info: scsi@0:0.0.0 logical name: /dev/sda version: 2.15 serial: OCZ-0350P6H316X5KUQE size: 223GiB (240GB) capabilities: partitioned partitioned:dos configuration: ansiversion=5 signature=000592dd *-volume:0 description: EXT4 volume vendor: Linux physical id: 1 bus info: scsi@0:0.0.0,1 logical name: /dev/sda1 logical name: / version: 1.0 serial: e741f18c-cfc5-4bce-b1e7-f80e517a3a22 size: 207GiB capacity: 207GiB capabilities: primary bootable journaled extended_attributes large_files huge_files dir_nlink recover extents ext4 ext2 initialized configuration: created=2012-06-15 06:49:27 filesystem=ext4 lastmountpoint=/ modified=2012-06-14 21:23:42 mount.fstype=ext4 mount.options=rw,relatime,errors=remount-ro,user_xattr,barrier=1,data=ordered mounted=2012-07-10 16:18:20 state=mounted *-volume:1 description: Extended partition physical id: 2 bus info: scsi@0:0.0.0,2 logical name: /dev/sda2 size: 15GiB capacity: 15GiB capabilities: primary extended partitioned partitioned:extended *-logicalvolume description: Linux swap / Solaris partition physical id: 5 logical name: /dev/sda5 capacity: 15GiB capabilities: nofs *-serial UNCLAIMED description: SMBus product: 5 Series/3400 Series Chipset SMBus Controller vendor: Intel Corporation physical id: 1f.3 bus info: pci@0000:00:1f.3 version: 05 width: 64 bits clock: 33MHz configuration: latency=0 resources: memory:d4205c00-d4205cff ioport:5000(size=32) *-pci:1 description: Host bridge product: Core Processor QuickPath Architecture Generic Non-Core Registers vendor: Intel Corporation physical id: 101 bus info: pci@0000:ff:00.0 version: 04 width: 32 bits clock: 33MHz *-pci:2 description: Host bridge product: Core Processor QuickPath Architecture System Address Decoder vendor: Intel Corporation physical id: 102 bus info: pci@0000:ff:00.1 version: 04 width: 32 bits clock: 33MHz *-pci:3 description: Host bridge product: Core Processor QPI Link 0 vendor: Intel Corporation physical id: 103 bus info: pci@0000:ff:02.0 version: 04 width: 32 bits clock: 33MHz *-pci:4 description: Host bridge product: Core Processor QPI Physical 0 vendor: Intel Corporation physical id: 104 bus info: pci@0000:ff:02.1 version: 04 width: 32 bits clock: 33MHz *-pci:5 description: Host bridge product: Core Processor Integrated Memory Controller vendor: Intel Corporation physical id: 105 bus info: pci@0000:ff:03.0 version: 04 width: 32 bits clock: 33MHz *-pci:6 description: Host bridge product: Core Processor Integrated Memory Controller Target Address Decoder vendor: Intel Corporation physical id: 106 bus info: pci@0000:ff:03.1 version: 04 width: 32 bits clock: 33MHz *-pci:7 description: Host bridge product: Core Processor Integrated Memory Controller Test Registers vendor: Intel Corporation physical id: 107 bus info: pci@0000:ff:03.4 version: 04 width: 32 bits clock: 33MHz *-pci:8 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Control Registers vendor: Intel Corporation physical id: 108 bus info: pci@0000:ff:04.0 version: 04 width: 32 bits clock: 33MHz *-pci:9 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Address Registers vendor: Intel Corporation physical id: 109 bus info: pci@0000:ff:04.1 version: 04 width: 32 bits clock: 33MHz *-pci:10 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Rank Registers vendor: Intel Corporation physical id: 10a bus info: pci@0000:ff:04.2 version: 04 width: 32 bits clock: 33MHz *-pci:11 description: Host bridge product: Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers vendor: Intel Corporation physical id: 10b bus info: pci@0000:ff:04.3 version: 04 width: 32 bits clock: 33MHz *-pci:12 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Control Registers vendor: Intel Corporation physical id: 10c bus info: pci@0000:ff:05.0 version: 04 width: 32 bits clock: 33MHz *-pci:13 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Address Registers vendor: Intel Corporation physical id: 10d bus info: pci@0000:ff:05.1 version: 04 width: 32 bits clock: 33MHz *-pci:14 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Rank Registers vendor: Intel Corporation physical id: 10e bus info: pci@0000:ff:05.2 version: 04 width: 32 bits clock: 33MHz *-pci:15 description: Host bridge product: Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers vendor: Intel Corporation physical id: 10f bus info: pci@0000:ff:05.3 version: 04 width: 32 bits clock: 33MHz *-battery description: Lithium Ion Battery product: NK06053 vendor: SMP-ATL24 physical id: 1 slot: Primary capacity: 4800mWh configuration: voltage=11.1V lspci: 02:00.0 USB controller: NEC Corporation uPD720200 USB 3.0 Host Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Hewlett-Packard Company Device 1522 Flags: bus master, fast devsel, latency 0, IRQ 16 Memory at d4000000 (64-bit, non-prefetchable) [size=8K] Capabilities: [50] Power Management version 3 Capabilities: [70] MSI: Enable- Count=1/8 Maskable- 64bit+ Capabilities: [90] MSI-X: Enable+ Count=8 Masked- Capabilities: [a0] Express Endpoint, MSI 00 Capabilities: [100] Advanced Error Reporting Capabilities: [140] Device Serial Number ff-ff-ff-ff-ff-ff-ff-ff Capabilities: [150] Latency Tolerance Reporting Kernel driver in use: xhci_hcd lsusb (with thumb drive plugged into USB3 port): Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 002: ID 8087:0020 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 003: ID 5986:01d0 Acer, Inc Bus 001 Device 004: ID 03f0:231d Hewlett-Packard

    Read the article

  • Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe driver tg3 will not install?

    - by Pete
    aries@aries-laptop:~$ sudo ifconfig eth0 up eth0: ERROR while getting interface flags: No such device aries@aries-laptop:~$ lspci -nn 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1705] 00:01.0 VGA compatible controller [0300]: ATI Technologies Inc Device [1002:9641] 00:01.1 Audio device [0403]: ATI Technologies Inc Device [1002:1714] 00:04.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:1709] 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:170b] 00:11.0 SATA controller [0106]: Advanced Micro Devices [AMD] Device [1022:7800] (rev 40) 00:12.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:12.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:13.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:13.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:14.0 SMBus [0c05]: Advanced Micro Devices [AMD] Device [1022:780b] (rev 13) 00:14.2 Audio device [0403]: Advanced Micro Devices [AMD] Device [1022:780d] (rev 01) 00:14.3 ISA bridge [0601]: Advanced Micro Devices [AMD] Device [1022:780e] (rev 11) 00:14.4 PCI bridge [0604]: Advanced Micro Devices [AMD] Device [1022:780f] (rev 40) 00:16.0 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7807] (rev 11) 00:16.2 USB Controller [0c03]: Advanced Micro Devices [AMD] Device [1022:7808] (rev 11) 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1700] (rev 43) 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1701] 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1702] 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1703] 00:18.4 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1704] 00:18.5 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1718] 00:18.6 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1716] 00:18.7 Host bridge [0600]: Advanced Micro Devices [AMD] Device [1022:1719] 01:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM57785 Gigabit Ethernet PCIe [14e4:16b5] (rev 10) 01:00.1 SD Host controller [0805]: Broadcom Corporation Device [14e4:16bc] (rev 10) 01:00.2 System peripheral [0880]: Broadcom Corporation Device [14e4:16be] (rev 10) 01:00.3 System peripheral [0880]: Broadcom Corporation Device [14e4:16bf] (rev 10) 02:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4358]

    Read the article

  • MVC and delegation

    - by timjver
    I am a beginning iOS programmer and use the Model-View-Controller model as a design pattern: my model doesn't know anything about my view (in order to make it compatible with any view), my view doesn't know anything about my model so they interact via my controller. A very usual way for a view to interact with the controller is through delegation: when the user interacts with the app, my view will notify my controller, which can call some methods of my model and update my view, if necessary. However, would it make sense to also make my controller the delegate of my model? I'm not convinced this is the way to go. It could be handy for my model to notify my controller of some process being finished, for example, or to ask for extra input of the user if it doesn't have enough information to complete the task. The downside of this, though, is that my controller would be the delegate for both my controller and my model, so there wouldn't be really a proper way to notify my model of changes in my view, and vice versa. (correct me if I'm wrong.) Conclusion: I don't really think it's a good idea to to have my controller to be the delegate of my model, but just being the delegate of my view would be fine. Is this the way most MVC models handle? Or is there a way to have the controller be the delegate of both the controller and the model, with proper communication between them? Like I said, I'm a beginner, so I want to do such stuff the right way immediately, rather than spending loads of hours on models that won't work anyway. :)

    Read the article

  • Shorter Rails routes

    - by Puru puru rin..
    Hello, I have a thing blog application, and I would like to shorten my routes. Here there are: Blog::Application.routes.draw do resources :categories do resources :articles do resources :comments end end A rake routes command build the following lines: GET /categories/:category_id/articles/:article_id/comments(.:format) {:controller=>"comments", :action=>"index"} category_article_comments POST /categories/:category_id/articles/:article_id/comments(.:format) {:controller=>"comments", :action=>"create"} new_category_article_comment GET /categories/:category_id/articles/:article_id/comments/new(.:format) {:controller=>"comments", :action=>"new"} GET /categories/:category_id/articles/:article_id/comments/:id(.:format) {:controller=>"comments", :action=>"show"} PUT /categories/:category_id/articles/:article_id/comments/:id(.:format) {:controller=>"comments", :action=>"update"} category_article_comment DELETE /categories/:category_id/articles/:article_id/comments/:id(.:format) {:controller=>"comments", :action=>"destroy"} edit_category_article_comment GET /categories/:category_id/articles/:article_id/comments/:id/edit(.:format) {:controller=>"comments", :action=>"edit"} GET /categories/:category_id/articles(.:format) {:controller=>"articles", :action=>"index"} category_articles POST /categories/:category_id/articles(.:format) {:controller=>"articles", :action=>"create"} new_category_article GET /categories/:category_id/articles/new(.:format) {:controller=>"articles", :action=>"new"} GET /categories/:category_id/articles/:id(.:format) {:controller=>"articles", :action=>"show"} PUT /categories/:category_id/articles/:id(.:format) {:controller=>"articles", :action=>"update"} category_article DELETE /categories/:category_id/articles/:id(.:format) {:controller=>"articles", :action=>"destroy"} edit_category_article GET /categories/:category_id/articles/:id/edit(.:format) {:controller=>"articles", :action=>"edit"} GET /categories(.:format) {:controller=>"categories", :action=>"index"} categories POST /categories(.:format) {:controller=>"categories", :action=>"create"} new_category GET /categories/new(.:format) {:controller=>"categories", :action=>"new"} GET /categories/:id(.:format) {:controller=>"categories", :action=>"show"} PUT /categories/:id(.:format) {:controller=>"categories", :action=>"update"} category DELETE /categories/:id(.:format) {:controller=>"categories", :action=>"destroy"} edit_category GET /categories/:id/edit(.:format) {:controller=>"categories", :action=>"edit"} As can be seen, each resource is ordered in a tree. So I believe that, it's could be interesting to simplify my routes such as for example: /categories/ => / /categories/:id => /:id /categories/:category_id/articles/ => /:category_id/articles /categories/:category_id/articles/:id => /:category_id/:id /categories/:category_id/articles/:article_id/comments/ => /:category_id/:article_id/comments /categories/:category_id/articles/:article_id/comments/:id => /:category_id/:article_id/:id It's more DRY, is't it? :) Does Rails 3 provides a easy way to do so, with an HTTP verbs mapping to controller actions automatically? Thanks anyone.

    Read the article

  • How to post back selected checkboxes to Controller

    - by TonyP
    I have following view <asp:Content ID="Content2" ContentPlaceHolderID="MainContent" runat="server"> <h2>Tables <%=ViewData["RetriverName"] %></h2> <%using (Html.BeginForm("ResfreshSelectedTables", "Home")) { // begin form%> <table id="MyTable"> <thread> <tr> <th style="width: 150px; text-align:center"><input type="checkbox" id="SelectAll" />Select All..</th> </tr> <tr> <th style="width:20px; text-align:right">ID</th> <th style="width:40px">Base Table</th> <th style="width:50px">Table</th> <th style="width:280px">Description</th> </tr> </thread> <tbody> <% int i = 0; foreach (var item in Model) { %> <tr id="row<%= i.ToString() %>"> <td align="center" style="padding: 0 0 0 0"> <%= Html.CheckBox("selections[" + i.ToString() + "].IsSelected", item.IsSelected)%> <%= Html.Hidden("selections[" + i.ToString() + "].ID", item.id)%> <%= Html.Hidden("selections[" + i.ToString() + "].BaseTable", item.baseTable)%> <%= Html.Hidden("selections[" + i.ToString() + "].Name", item.NAME)%> </td> <td style="text-align:right"><%=Html.Encode(item.id)%></td> <td><%= Html.Encode(item.baseTable)%></td> <td><%=Html.Encode(item.NAME)%></td> <td><%=Html.Encode(item.Description) %></td> </tr> <% i++; } %> </tbody> </table> <p> <input type="submit" value="saving" /> </p> <% }//end form %> <script src="../../Scripts/jquery-1.4.1.min.js" type="text/javascript"></script> <script type="text/javascript"> // Select All Checkboxes $(document).ready(function() { $('#SelectAll').click(function() { var newValue = this.checked; $('input:checkbox').not('input:hidden').each(function() { // alert(this.id+newValue ); this.checked = newValue; }); }); }); </script> </asp:Content> How do I postback selected checkboxes to the controller ?

    Read the article

  • Accessing multiple view controllers in page controller

    - by Apple Delegates
    I am showing view in ipad like a book, single view shows two view. I want to add more views so that when view flipped third and fourth view appears and further. I am using the code below to do so. I am adding ViewControllers to array it got kill at orientation method at this line " ContentViewController *currentViewController = [self.pageViewController.viewControllers objectAtIndex:0];". - (void)viewDidLoad { [super viewDidLoad]; //Instantiate the model array self.modelArray = [[NSMutableArray alloc] init]; for (int index = 1; index <= 12 ; index++) { [self.modelArray addObject:[NSString stringWithFormat:@"Page %d",index]]; } //Step 1 //Instantiate the UIPageViewController. self.pageViewController = [[UIPageViewController alloc] initWithTransitionStyle:UIPageViewControllerTransitionStylePageCurl navigationOrientation:UIPageViewControllerNavigationOrientationHorizontal options:nil]; //Step 2: //Assign the delegate and datasource as self. self.pageViewController.delegate = self; self.pageViewController.dataSource = self; //Step 3: //Set the initial view controllers. ViewOne *one = [[ViewOne alloc]initWithNibName:@"ViewOne" bundle:nil]; viewTwo *two = [[viewTwo alloc]initWithNibName:@"ViewTwo" bundle:nil]; ContentViewController *contentViewController = [[ContentViewController alloc] initWithNibName:@"ContentViewController" bundle:nil]; contentViewController.labelContents = [self.modelArray objectAtIndex:0]; // NSArray *viewControllers = [NSArray arrayWithObject:contentViewController]; viewControllers = [NSArray arrayWithObjects:contentViewController,one,two,nil]; [self.pageViewController setViewControllers:viewControllers direction:UIPageViewControllerNavigationDirectionForward animated:NO completion:nil]; //Step 4: //ViewController containment steps //Add the pageViewController as the childViewController [self addChildViewController:self.pageViewController]; //Add the view of the pageViewController to the current view [self.view addSubview:self.pageViewController.view]; //Call didMoveToParentViewController: of the childViewController, the UIPageViewController instance in our case. [self.pageViewController didMoveToParentViewController:self]; //Step 5: // set the pageViewController's frame as an inset rect. CGRect pageViewRect = self.view.bounds; pageViewRect = CGRectInset(pageViewRect, 40.0, 40.0); self.pageViewController.view.frame = pageViewRect; //Step 6: //Assign the gestureRecognizers property of our pageViewController to our view's gestureRecognizers property. self.view.gestureRecognizers = self.pageViewController.gestureRecognizers; } - (UIPageViewControllerSpineLocation)pageViewController:(UIPageViewController *)pageViewController spineLocationForInterfaceOrientation:(UIInterfaceOrientation)orientation { if(UIInterfaceOrientationIsPortrait(orientation)) { //Set the array with only 1 view controller UIViewController *currentViewController = [self.pageViewController.viewControllers objectAtIndex:0]; NSArray *viewControllers = [NSArray arrayWithObject:currentViewController]; [self.pageViewController setViewControllers:viewControllers direction:UIPageViewControllerNavigationDirectionForward animated:YES completion:NULL]; //Important- Set the doubleSided property to NO. self.pageViewController.doubleSided = NO; //Return the spine location return UIPageViewControllerSpineLocationMin; } else { // NSArray *viewControllers = nil; ContentViewController *currentViewController = [self.pageViewController.viewControllers objectAtIndex:0]; NSUInteger currentIndex = [self.modelArray indexOfObject:[(ContentViewController *)currentViewController labelContents]]; if(currentIndex == 0 || currentIndex %2 == 0) { UIViewController *nextViewController = [self pageViewController:self.pageViewController viewControllerAfterViewController:currentViewController]; viewControllers = [NSArray arrayWithObjects:currentViewController, nextViewController, nil]; } else { UIViewController *previousViewController = [self pageViewController:self.pageViewController viewControllerBeforeViewController:currentViewController]; viewControllers = [NSArray arrayWithObjects:previousViewController, currentViewController, nil]; } //Now, set the viewControllers property of UIPageViewController [self.pageViewController setViewControllers:viewControllers direction:UIPageViewControllerNavigationDirectionForward animated:YES completion:NULL]; return UIPageViewControllerSpineLocationMid; } }

    Read the article

  • Problem with room/screen/menu controller in python game: old rooms are not removed from memory

    - by Jordan Magnuson
    I'm literally banging my head against a wall here (as in, yes, physically, at my current location, I am damaging my cranium). Basically, I've got a Python/Pygame game with some typical game "rooms", or "screens." EG title screen, high scores screen, and the actual game room. Something bad is happening when I switch between rooms: the old room (and its various items) are not removed from memory, or from my event listener. Not only that, but every time I go back to a certain room, my number of event listeners increases, as well as the RAM being consumed! (So if I go back and forth between the title screen and the "game room", for instance, the number of event listeners and the memory usage just keep going up and up. The main issue is that all the event listeners start to add up and really drain the CPU. I'm new to Python, and don't know if I'm doing something obviously wrong here, or what. I will love you so much if you can help me with this! Below is the relevant source code. Complete source code at http://www.necessarygames.com/my_games/betraveled/betraveled_src0328.zip MAIN.PY class RoomController(object): """Controls which room is currently active (eg Title Screen)""" def __init__(self, screen, ev_manager): self.room = None self.screen = screen self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.room = self.set_room(config.room) def set_room(self, room_const): #Unregister old room from ev_manager if self.room: self.room.ev_manager.unregister_listener(self.room) self.room = None #Set new room based on const if room_const == config.TITLE_SCREEN: return rooms.TitleScreen(self.screen, self.ev_manager) elif room_const == config.GAME_MODE_ROOM: return rooms.GameModeRoom(self.screen, self.ev_manager) elif room_const == config.GAME_ROOM: return rooms.GameRoom(self.screen, self.ev_manager) elif room_const == config.HIGH_SCORES_ROOM: return rooms.HighScoresRoom(self.screen, self.ev_manager) def notify(self, event): if isinstance(event, ChangeRoomRequest): if event.game_mode: config.game_mode = event.game_mode self.room = self.set_room(event.new_room) #Run game def main(): pygame.init() screen = pygame.display.set_mode(config.screen_size) ev_manager = EventManager() spinner = CPUSpinnerController(ev_manager) room_controller = RoomController(screen, ev_manager) pygame_event_controller = PyGameEventController(ev_manager) spinner.run() EVENT_MANAGER.PY class EventManager: #This object is responsible for coordinating most communication #between the Model, View, and Controller. def __init__(self): from weakref import WeakKeyDictionary self.last_listeners = {} self.listeners = WeakKeyDictionary() self.eventQueue= [] self.gui_app = None #---------------------------------------------------------------------- def register_listener(self, listener): self.listeners[listener] = 1 #---------------------------------------------------------------------- def unregister_listener(self, listener): if listener in self.listeners: del self.listeners[listener] #---------------------------------------------------------------------- def clear(self): del self.listeners[:] #---------------------------------------------------------------------- def post(self, event): # if isinstance(event, MouseButtonLeftEvent): # debug(event.name) #NOTE: copying the list like this before iterating over it, EVERY tick, is highly inefficient, #but currently has to be done because of how new listeners are added to the queue while it is running #(eg when popping cards from a deck). Should be changed. See: http://dr0id.homepage.bluewin.ch/pygame_tutorial08.html #and search for "Watch the iteration" print 'Number of listeners: ' + str(len(self.listeners)) for listener in list(self.listeners): #NOTE: If the weakref has died, it will be #automatically removed, so we don't have #to worry about it. listener.notify(event) def notify(self, event): pass #------------------------------------------------------------------------------ class PyGameEventController: """...""" def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.input_freeze = False #---------------------------------------------------------------------- def notify(self, incoming_event): if isinstance(incoming_event, UserInputFreeze): self.input_freeze = True elif isinstance(incoming_event, UserInputUnFreeze): self.input_freeze = False elif isinstance(incoming_event, TickEvent) or isinstance(incoming_event, BoardCreationTick): #Share some time with other processes, so we don't hog the cpu pygame.time.wait(5) #Handle Pygame Events for event in pygame.event.get(): #If this event manager has an associated PGU GUI app, notify it of the event if self.ev_manager.gui_app: self.ev_manager.gui_app.event(event) #Standard event handling for everything else ev = None if event.type == QUIT: ev = QuitEvent() elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 1: #Button 1 pos = pygame.mouse.get_pos() ev = MouseButtonLeftEvent(pos) elif event.type == pygame.MOUSEBUTTONDOWN and not self.input_freeze: if event.button == 2: #Button 2 pos = pygame.mouse.get_pos() ev = MouseButtonRightEvent(pos) elif event.type == pygame.MOUSEBUTTONUP and not self.input_freeze: if event.button == 2: #Button 2 Release pos = pygame.mouse.get_pos() ev = MouseButtonRightReleaseEvent(pos) elif event.type == pygame.MOUSEMOTION: pos = pygame.mouse.get_pos() ev = MouseMoveEvent(pos) #Post event to event manager if ev: self.ev_manager.post(ev) # elif isinstance(event, BoardCreationTick): # #Share some time with other processes, so we don't hog the cpu # pygame.time.wait(5) # # #If this event manager has an associated PGU GUI app, notify it of the event # if self.ev_manager.gui_app: # self.ev_manager.gui_app.event(event) #------------------------------------------------------------------------------ class CPUSpinnerController: def __init__(self, ev_manager): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.clock = pygame.time.Clock() self.cumu_time = 0 self.keep_going = True #---------------------------------------------------------------------- def run(self): if not self.keep_going: raise Exception('dead spinner') while self.keep_going: time_passed = self.clock.tick() fps = self.clock.get_fps() self.cumu_time += time_passed self.ev_manager.post(TickEvent(time_passed, fps)) if self.cumu_time >= 1000: self.cumu_time = 0 self.ev_manager.post(SecondEvent(fps=fps)) pygame.quit() #---------------------------------------------------------------------- def notify(self, event): if isinstance(event, QuitEvent): #this will stop the while loop from running self.keep_going = False EXAMPLE CLASS USING EVENT MANAGER class Timer(object): def __init__(self, ev_manager, time_left): self.ev_manager = ev_manager self.ev_manager.register_listener(self) self.time_left = time_left self.paused = False def __repr__(self): return str(self.time_left) def pause(self): self.paused = True def unpause(self): self.paused = False def notify(self, event): #Pause Event if isinstance(event, Pause): self.pause() #Unpause Event elif isinstance(event, Unpause): self.unpause() #Second Event elif isinstance(event, SecondEvent): if not self.paused: self.time_left -= 1

    Read the article

  • No method error in controller create action

    - by user2799827
    I have read a number of Q&As on SO in search of some help on this but have so far not solved my issue. I am trying to teach myself ruby/rails, and as a test project, I want to create a list of tvshows and a list of characters where each tvshow has_many characters and each character belongs_to a specific show. I am sure I am doing something basic incorrectly. Any assistance would be greatly appreciated. here is the characters controller: class CharactersController < ApplicationController before_action :set_character, only: [:show, :edit, :update, :destroy] # GET /characters # GET /characters.json def index @characters = Character.all end # GET /characters/1 # GET /characters/1.json def show end # GET /characters/new def new @character = Character.new end # GET /characters/1/edit def edit end # POST /characters # POST /characters.json def create @character = @tvshow.characters.create(params[:character]) respond_to do |format| if @character.save format.html { redirect_to @character, notice: 'Character was successfully created.' } format.json { render action: 'show', status: :created, location: @character } else format.html { render action: 'new' } format.json { render json: @character.errors, status: :unprocessable_entity } end end end # PATCH/PUT /characters/1 # PATCH/PUT /characters/1.json def update respond_to do |format| if @character.update(character_params) format.html { redirect_to @character, notice: 'Character was successfully updated.' } format.json { head :no_content } else format.html { render action: 'edit' } format.json { render json: @character.errors, status: :unprocessable_entity } end end end # DELETE /characters/1 # DELETE /characters/1.json def destroy @character.destroy respond_to do |format| format.html { redirect_to characters_url } format.json { head :no_content } end end private # Use callbacks to share common setup or constraints between actions. def set_character @character = Character.find(params[:id]) end # Never trust parameters from the scary internet, only allow the white list through. def character_params params.require(:character).permit(:first_name, :last_name, :bio) end end character model: class Character < ActiveRecord::Base belongs_to :tvshow default_scope -> { order('created_at DESC') } validates :tvshow_id, presence: true end tvshow model: class Tvshow < ActiveRecord::Base has_many :characters, dependent: :destroy end error gets returned when I attempt to create a character. here is the full trace: app/controllers/characters_controller.rb:27:in `create' actionpack (4.0.0) lib/action_controller/metal/implicit_render.rb:4:in `send_action' actionpack (4.0.0) lib/abstract_controller/base.rb:189:in `process_action' actionpack (4.0.0) lib/action_controller/metal/rendering.rb:10:in `process_action' actionpack (4.0.0) lib/abstract_controller/callbacks.rb:18:in `block in process_action' activesupport (4.0.0) lib/active_support/callbacks.rb:413:in `_run__1211653665462320621__process_action__callbacks' activesupport (4.0.0) lib/active_support/callbacks.rb:80:in `run_callbacks' actionpack (4.0.0) lib/abstract_controller/callbacks.rb:17:in `process_action' actionpack (4.0.0) lib/action_controller/metal/rescue.rb:29:in `process_action' actionpack (4.0.0) lib/action_controller/metal/instrumentation.rb:31:in `block in process_action' activesupport (4.0.0) lib/active_support/notifications.rb:159:in `block in instrument' activesupport (4.0.0) lib/active_support/notifications/instrumenter.rb:20:in `instrument' activesupport (4.0.0) lib/active_support/notifications.rb:159:in `instrument' actionpack (4.0.0) lib/action_controller/metal/instrumentation.rb:30:in `process_action' actionpack (4.0.0) lib/action_controller/metal/params_wrapper.rb:245:in `process_action' activerecord (4.0.0) lib/active_record/railties/controller_runtime.rb:18:in `process_action' actionpack (4.0.0) lib/abstract_controller/base.rb:136:in `process' actionpack (4.0.0) lib/abstract_controller/rendering.rb:44:in `process' actionpack (4.0.0) lib/action_controller/metal.rb:195:in `dispatch' actionpack (4.0.0) lib/action_controller/metal/rack_delegation.rb:13:in `dispatch' actionpack (4.0.0) lib/action_controller/metal.rb:231:in `block in action' actionpack (4.0.0) lib/action_dispatch/routing/route_set.rb:80:in `call' actionpack (4.0.0) lib/action_dispatch/routing/route_set.rb:80:in `dispatch' actionpack (4.0.0) lib/action_dispatch/routing/route_set.rb:48:in `call' actionpack (4.0.0) lib/action_dispatch/journey/router.rb:71:in `block in call' actionpack (4.0.0) lib/action_dispatch/journey/router.rb:59:in `each' actionpack (4.0.0) lib/action_dispatch/journey/router.rb:59:in `call' actionpack (4.0.0) lib/action_dispatch/routing/route_set.rb:655:in `call' rack (1.5.2) lib/rack/etag.rb:23:in `call' rack (1.5.2) lib/rack/conditionalget.rb:35:in `call' rack (1.5.2) lib/rack/head.rb:11:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/params_parser.rb:27:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/flash.rb:241:in `call' rack (1.5.2) lib/rack/session/abstract/id.rb:225:in `context' rack (1.5.2) lib/rack/session/abstract/id.rb:220:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/cookies.rb:486:in `call' activerecord (4.0.0) lib/active_record/query_cache.rb:36:in `call' activerecord (4.0.0) lib/active_record/connection_adapters/abstract/connection_pool.rb:626:in `call' activerecord (4.0.0) lib/active_record/migration.rb:369:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/callbacks.rb:29:in `block in call' activesupport (4.0.0) lib/active_support/callbacks.rb:373:in `_run__2792846465963916895__call__callbacks' activesupport (4.0.0) lib/active_support/callbacks.rb:80:in `run_callbacks' actionpack (4.0.0) lib/action_dispatch/middleware/callbacks.rb:27:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/reloader.rb:64:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/remote_ip.rb:76:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/debug_exceptions.rb:17:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/show_exceptions.rb:30:in `call' railties (4.0.0) lib/rails/rack/logger.rb:38:in `call_app' railties (4.0.0) lib/rails/rack/logger.rb:21:in `block in call' activesupport (4.0.0) lib/active_support/tagged_logging.rb:67:in `block in tagged' activesupport (4.0.0) lib/active_support/tagged_logging.rb:25:in `tagged' activesupport (4.0.0) lib/active_support/tagged_logging.rb:67:in `tagged' railties (4.0.0) lib/rails/rack/logger.rb:21:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/request_id.rb:21:in `call' rack (1.5.2) lib/rack/methodoverride.rb:21:in `call' rack (1.5.2) lib/rack/runtime.rb:17:in `call' activesupport (4.0.0) lib/active_support/cache/strategy/local_cache.rb:83:in `call' rack (1.5.2) lib/rack/lock.rb:17:in `call' actionpack (4.0.0) lib/action_dispatch/middleware/static.rb:64:in `call' railties (4.0.0) lib/rails/engine.rb:511:in `call' railties (4.0.0) lib/rails/application.rb:97:in `call' rack (1.5.2) lib/rack/lock.rb:17:in `call' rack (1.5.2) lib/rack/content_length.rb:14:in `call' rack (1.5.2) lib/rack/handler/webrick.rb:60:in `service' /Users/dariusgoore/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/httpserver.rb:138:in `service' /Users/dariusgoore/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/httpserver.rb:94:in `run' /Users/dariusgoore/.rvm/rubies/ruby-1.9.3-p194/lib/ruby/1.9.1/webrick/server.rb:191:in `block in start_thread'

    Read the article

  • Trouble Upgrading Rails 2 Routes for a Redmine Plugin

    - by user1858628
    I am trying to get a Redmine plugin designed for Rails 2 to work with Rails 3. https://github.com/dalyons/redmine-todos-scrum-plugin I've pretty much fixed most parts, but having no success whatsoever in getting the routes to work. The original routes for Rails 2 are as follows: map.resources :todos, :name_prefix => 'project_', :path_prefix => '/projects/:project_id', :member => {:toggle_complete => :post }, :collection => {:sort => :post} map.resources :todos, :name_prefix => 'user_', :path_prefix => '/users/:user_id', :controller => :mytodos, :member => {:toggle_complete => :post }, :collection => {:sort => :post} map.my_todos 'my/todos', :controller => :mytodos, :action => :index map.connect 'projects/:project_id/todos/show/:id', :controller => "todos", :action => "show" rake routes outputs the following: sort_project_todos POST /projects/:project_id/todos/sort(.:format) {:controller=>"todos", :action=>"sort"} project_todos GET /projects/:project_id/todos(.:format) {:controller=>"todos", :action=>"index"} POST /projects/:project_id/todos(.:format) {:controller=>"todos", :action=>"create"} new_project_todo GET /projects/:project_id/todos/new(.:format) {:controller=>"todos", :action=>"new"} toggle_complete_project_todo POST /projects/:project_id/todos/:id/toggle_complete(.:format) {:controller=>"todos", :action=>"toggle_complete"} edit_project_todo GET /projects/:project_id/todos/:id/edit(.:format) {:controller=>"todos", :action=>"edit"} project_todo GET /projects/:project_id/todos/:id(.:format) {:controller=>"todos", :action=>"show"} PUT /projects/:project_id/todos/:id(.:format) {:controller=>"todos", :action=>"update"} DELETE /projects/:project_id/todos/:id(.:format) {:controller=>"todos", :action=>"destroy"} sort_user_todos POST /users/:user_id/todos/sort(.:format) {:controller=>"mytodos", :action=>"sort"} user_todos GET /users/:user_id/todos(.:format) {:controller=>"mytodos", :action=>"index"} POST /users/:user_id/todos(.:format) {:controller=>"mytodos", :action=>"create"} new_user_todo GET /users/:user_id/todos/new(.:format) {:controller=>"mytodos", :action=>"new"} toggle_complete_user_todo POST /users/:user_id/todos/:id/toggle_complete(.:format) {:controller=>"mytodos", :action=>"toggle_complete"} edit_user_todo GET /users/:user_id/todos/:id/edit(.:format) {:controller=>"mytodos", :action=>"edit"} user_todo GET /users/:user_id/todos/:id(.:format) {:controller=>"mytodos", :action=>"show"} PUT /users/:user_id/todos/:id(.:format) {:controller=>"mytodos", :action=>"update"} DELETE /users/:user_id/todos/:id(.:format) {:controller=>"mytodos", :action=>"destroy"} my_todos /my/todos {:controller=>"mytodos", :action=>"index"} /projects/:project_id/todos/show/:id {:controller=>"todos", :action=>"show"} The nearest I have got for Rails 3 is follows: scope '/projects/:project_id', :name_prefix => 'project_' do resources :todos, :controller => 'todos' do member do post :toggle_complete end collection do post :sort end end end scope '/users/:user_id', :name_prefix => 'user_' do resources :todos, :controller => 'mytodos' do member do post :toggle_complete end collection do post :sort end end end match 'my/todos' => 'mytodos#index', :as => :my_todos match 'projects/:project_id/todos/show/:id' => 'todos#show' rake routes outputs the following: toggle_complete_todo POST /projects/:project_id/todos/:id/toggle_complete(.:format) todos#toggle_complete {:name_prefix=>"project_"} sort_todos POST /projects/:project_id/todos/sort(.:format) todos#sort {:name_prefix=>"project_"} todos GET /projects/:project_id/todos(.:format) todos#index {:name_prefix=>"project_"} POST /projects/:project_id/todos(.:format) todos#create {:name_prefix=>"project_"} new_todo GET /projects/:project_id/todos/new(.:format) todos#new {:name_prefix=>"project_"} edit_todo GET /projects/:project_id/todos/:id/edit(.:format) todos#edit {:name_prefix=>"project_"} todo GET /projects/:project_id/todos/:id(.:format) todos#show {:name_prefix=>"project_"} PUT /projects/:project_id/todos/:id(.:format) todos#update {:name_prefix=>"project_"} DELETE /projects/:project_id/todos/:id(.:format) todos#destroy {:name_prefix=>"project_"} POST /users/:user_id/todos/:id/toggle_complete(.:format) mytodos#toggle_complete {:name_prefix=>"user_"} POST /users/:user_id/todos/sort(.:format) mytodos#sort {:name_prefix=>"user_"} GET /users/:user_id/todos(.:format) mytodos#index {:name_prefix=>"user_"} POST /users/:user_id/todos(.:format) mytodos#create {:name_prefix=>"user_"} GET /users/:user_id/todos/new(.:format) mytodos#new {:name_prefix=>"user_"} GET /users/:user_id/todos/:id/edit(.:format) mytodos#edit {:name_prefix=>"user_"} GET /users/:user_id/todos/:id(.:format) mytodos#show {:name_prefix=>"user_"} PUT /users/:user_id/todos/:id(.:format) mytodos#update {:name_prefix=>"user_"} DELETE /users/:user_id/todos/:id(.:format) mytodos#destroy {:name_prefix=>"user_"} my_todos /my/todos(.:format) mytodos#index /projects/:project_id/todos/show/:id(.:format) todos#show I am guessing that I am not using :name_prefix correctly, resulting in duplicate paths which are then omitted. Any help would be greatly appreciated.

    Read the article

  • Navigating MainMenu with arrow keys or controller

    - by Phil Royer
    I'm attempting to make my menu navigable with the arrow keys or via the d-pad on a controller. So Far I've had no luck. The question is: Can someone walk me through how to make my current menu or any libgdx menu keyboard accessible? I'm a bit noobish with some stuff and I come from a Javascript background. Here's an example of what I'm trying to do: http://dl.dropboxusercontent.com/u/39448/webgl/qb/qb.html For a simple menu that you can just add a few buttons to and it run out of the box use this: http://www.sadafnoor.com/blog/how-to-create-simple-menu-in-libgdx/ Or you can use my code but I use a lot of custom styles. And here's an example of my code: import aurelienribon.tweenengine.Timeline; import aurelienribon.tweenengine.Tween; import aurelienribon.tweenengine.TweenManager; import com.badlogic.gdx.Game; import com.badlogic.gdx.Gdx; import com.badlogic.gdx.Screen; import com.badlogic.gdx.graphics.GL20; import com.badlogic.gdx.graphics.Texture; import com.badlogic.gdx.graphics.g2d.Sprite; import com.badlogic.gdx.graphics.g2d.SpriteBatch; import com.badlogic.gdx.graphics.g2d.TextureAtlas; import com.badlogic.gdx.math.Vector2; import com.badlogic.gdx.scenes.scene2d.Actor; import com.badlogic.gdx.scenes.scene2d.InputEvent; import com.badlogic.gdx.scenes.scene2d.InputListener; import com.badlogic.gdx.scenes.scene2d.Stage; import com.badlogic.gdx.scenes.scene2d.ui.Skin; import com.badlogic.gdx.scenes.scene2d.ui.Table; import com.badlogic.gdx.scenes.scene2d.ui.TextButton; import com.badlogic.gdx.scenes.scene2d.utils.Align; import com.badlogic.gdx.scenes.scene2d.utils.ClickListener; import com.project.game.tween.ActorAccessor; public class MainMenu implements Screen { private SpriteBatch batch; private Sprite menuBG; private Stage stage; private TextureAtlas atlas; private Skin skin; private Table table; private TweenManager tweenManager; @Override public void render(float delta) { Gdx.gl.glClearColor(0, 0, 0, 1); Gdx.gl.glClear(GL20.GL_COLOR_BUFFER_BIT); batch.begin(); menuBG.draw(batch); batch.end(); //table.debug(); stage.act(delta); stage.draw(); //Table.drawDebug(stage); tweenManager.update(delta); } @Override public void resize(int width, int height) { menuBG.setSize(width, height); stage.setViewport(width, height, false); table.invalidateHierarchy(); } @Override public void resume() { } @Override public void show() { stage = new Stage(); Gdx.input.setInputProcessor(stage); batch = new SpriteBatch(); atlas = new TextureAtlas("ui/atlas.pack"); skin = new Skin(Gdx.files.internal("ui/menuSkin.json"), atlas); table = new Table(skin); table.setBounds(0, 0, Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); // Set Background Texture menuBackgroundTexture = new Texture("images/mainMenuBackground.png"); menuBG = new Sprite(menuBackgroundTexture); menuBG.setSize(Gdx.graphics.getWidth(), Gdx.graphics.getHeight()); // Create Main Menu Buttons // Button Play TextButton buttonPlay = new TextButton("START", skin, "inactive"); buttonPlay.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new LevelMenu()); } }); buttonPlay.addListener(new InputListener() { public boolean keyDown (InputEvent event, int keycode) { System.out.println("down"); return true; } }); buttonPlay.padBottom(12); buttonPlay.padLeft(20); buttonPlay.getLabel().setAlignment(Align.left); // Button EXTRAS TextButton buttonExtras = new TextButton("EXTRAS", skin, "inactive"); buttonExtras.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new ExtrasMenu()); } }); buttonExtras.padBottom(12); buttonExtras.padLeft(20); buttonExtras.getLabel().setAlignment(Align.left); // Button Credits TextButton buttonCredits = new TextButton("CREDITS", skin, "inactive"); buttonCredits.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new Credits()); } }); buttonCredits.padBottom(12); buttonCredits.padLeft(20); buttonCredits.getLabel().setAlignment(Align.left); // Button Settings TextButton buttonSettings = new TextButton("SETTINGS", skin, "inactive"); buttonSettings.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { ((Game) Gdx.app.getApplicationListener()).setScreen(new Settings()); } }); buttonSettings.padBottom(12); buttonSettings.padLeft(20); buttonSettings.getLabel().setAlignment(Align.left); // Button Exit TextButton buttonExit = new TextButton("EXIT", skin, "inactive"); buttonExit.addListener(new ClickListener() { @Override public void clicked(InputEvent event, float x, float y) { Gdx.app.exit(); } }); buttonExit.padBottom(12); buttonExit.padLeft(20); buttonExit.getLabel().setAlignment(Align.left); // Adding Heading-Buttons to the cue table.add().width(190); table.add().width((table.getWidth() / 10) * 3); table.add().width((table.getWidth() / 10) * 5).height(140).spaceBottom(50); table.add().width(190).row(); table.add().width(190); table.add(buttonPlay).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonExtras).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonCredits).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonSettings).spaceBottom(20).width(460).height(110); table.add().row(); table.add().width(190); table.add(buttonExit).width(460).height(110); table.add().row(); stage.addActor(table); // Animation Settings tweenManager = new TweenManager(); Tween.registerAccessor(Actor.class, new ActorAccessor()); // Heading and Buttons Fade In Timeline.createSequence().beginSequence() .push(Tween.set(buttonPlay, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonExtras, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonCredits, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonSettings, ActorAccessor.ALPHA).target(0)) .push(Tween.set(buttonExit, ActorAccessor.ALPHA).target(0)) .push(Tween.to(buttonPlay, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonExtras, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonCredits, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonSettings, ActorAccessor.ALPHA, .5f).target(1)) .push(Tween.to(buttonExit, ActorAccessor.ALPHA, .5f).target(1)) .end().start(tweenManager); tweenManager.update(Gdx.graphics.getDeltaTime()); } public static Vector2 getStageLocation(Actor actor) { return actor.localToStageCoordinates(new Vector2(0, 0)); } @Override public void dispose() { stage.dispose(); atlas.dispose(); skin.dispose(); menuBG.getTexture().dispose(); } @Override public void hide() { dispose(); } @Override public void pause() { } }

    Read the article

  • after enabling mod ssl apache stops listening on port 80

    - by zensys
    I have an ubuntu 12.04 server with zend server CE installed. I now wanted to enable https but after the first steps according to the documentation, 'a2enmod ssl' and 'apache service restart', apache does not listen on 443 but neither on 80, according to netstat -tap | grep http(s)! This is what I see in my error log, but I can't make much of it: [Fri May 25 19:52:39 2012] [notice] caught SIGTERM, shutting down [Fri May 25 19:52:41 2012] [warn] Init: Session Cache is not configured [hint: SSLSessionCache] [Fri May 25 19:52:41 2012] [notice] ModSecurity for Apache/2.6.3 (http://www.modsecurity.org/) configured. [Fri May 25 19:52:41 2012] [notice] ModSecurity: APR compiled version="1.4.5"; loaded version="1.4.6" [Fri May 25 19:52:41 2012] [warn] ModSecurity: Loaded APR do not match with compiled! [Fri May 25 19:52:41 2012] [notice] ModSecurity: PCRE compiled version="8.12"; loaded version="8.12 2011-01-15" [Fri May 25 19:52:41 2012] [notice] ModSecurity: LUA compiled version="Lua 5.1" [Fri May 25 19:52:41 2012] [notice] ModSecurity: LIBXML compiled version="2.7.8" [Fri May 25 19:53:11 2012] [notice] ModSecurity for Apache/2.6.3 (http://www.modsecurity.org/) configured. [Fri May 25 19:53:11 2012] [notice] ModSecurity: APR compiled version="1.4.5"; loaded version="1.4.6" [Fri May 25 19:53:11 2012] [warn] ModSecurity: Loaded APR do not match with compiled! [Fri May 25 19:53:11 2012] [notice] ModSecurity: PCRE compiled version="8.12"; loaded version="8.12 2011-01-15" [Fri May 25 19:53:11 2012] [notice] ModSecurity: LUA compiled version="Lua 5.1" [Fri May 25 19:53:11 2012] [notice] ModSecurity: LIBXML compiled version="2.7.8" [Fri May 25 19:53:12 2012] [notice] Apache/2.2.22 (Ubuntu) PHP/5.3.8-ZS5.5.0 configured -- resuming normal operations and here is my httpd.conf: # Name based virtual hosting <virtualhost *:80> ServerName www-redirect KeepAlive Off RewriteEngine On RewriteCond %{HTTP_HOST} ^[^\./]+\.[^\./]+$ RewriteRule ^/(.*)$ http://www.%{HTTP_HOST}/$1 [R=301,L] </virtualhost> Alias /shared/js "/home/web/library/js" Alias /shared/image "/home/web/library/image" <IfModule mod_expires.c> <FilesMatch "\.(jpe?g|png|gif|js|css|doc|rtf|xls|pdf)$"> ExpiresActive On ExpiresDefault "access plus 1 week" </FilesMatch> </IfModule> ErrorLog ${APACHE_LOG_DIR}/error.log LogLevel warn <Directory /> Options FollowSymLinks AllowOverride None Order allow,deny allow from all </Directory> <Location /> RewriteEngine On RewriteCond %{REQUEST_FILENAME} -s [OR] RewriteCond %{REQUEST_FILENAME} -l [OR] RewriteCond %{REQUEST_FILENAME} -d RewriteRule ^.*$ - [NC,L] RewriteRule ^.*$ /index.php [NC,L] </Location> netstat -tap gives: Proto Recv-Q Send-Q Local Address Foreign Address State PID/Program name tcp 0 0 *:mysql *:* LISTEN 765/mysqld tcp 0 0 *:pop3 *:* LISTEN 744/dovecot tcp 0 0 *:imap2 *:* LISTEN 744/dovecot tcp 0 0 *:http *:* LISTEN 19861/apache2 tcp 0 0 *:smtp *:* LISTEN 30365/master tcp 0 0 *:4444 *:* LISTEN 634/sshd tcp 0 0 *:kamanda *:* LISTEN 1167/lighttpd tcp 0 0 *:imaps *:* LISTEN 744/dovecot tcp 0 0 *:amandaidx *:* LISTEN 1167/lighttpd tcp 0 0 localhost.loc:amidxtape *:* LISTEN 19861/apache2 tcp 0 0 *:pop3s *:* LISTEN 744/dovecot tcp 0 384 mail.mysite.:4444 231.214.14.37.dyn:41909 ESTABLISHED 19039/sshd: web [pr tcp 0 0 localhost.localdo:mysql localhost.localdo:48252 ESTABLISHED 765/mysqld tcp 0 0 mail.mysite.:http 231.214.14.37.dyn:54686 TIME_WAIT - tcp 0 0 mail.mysite.:4444 231.214.14.37.dyn:42419 ESTABLISHED 19372/sshd: web [pr tcp 0 0 localhost.localdo:48252 localhost.localdo:mysql ESTABLISHED 19884/auth tcp 0 0 mail.mysite.:http 231.214.14.37.dyn:54685 TIME_WAIT - tcp6 0 0 [::]:pop3 [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:imap2 [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:smtp [::]:* LISTEN 30365/master tcp6 0 0 [::]:4444 [::]:* LISTEN 634/sshd tcp6 0 0 [::]:imaps [::]:* LISTEN 744/dovecot tcp6 0 0 [::]:pop3s [::]:* LISTEN 744/dovecot Anyone knows what I am doing wrong? Perhaps I should take some additional steps to make apache listen 0n 443 but that it stops listening on 80 altogether I can't understand.

    Read the article

  • How do I install drivers for the Atheros AR8161 Ethernet controller?

    - by Jessica Burnett
    I have installed Ubuntu 12.04-64 bit on my Lenovo IdeaPad laptop, and the wired Ethernet (LAN) connection doesn't work. Running the lspci -vv | grep Atheros command from the terminal shows me I have the AR8161 Gigabit Ethernet controller: 02:00.0 Ethernet controller: Atheros Communications Inc. AR8161 Gigabit Ethernet (rev 08) This looks like a new product whose drivers are not built into Ubuntu. How do I install drivers to get the AR8161 working?

    Read the article

  • No network connectivity (not wired or wireless) - RT5390

    - by Ben Udy
    I am starting to think I simply need to accept a small loss and sell my new ASUS K73E. Because I really don't enjoy computing when I have to deal with Windough$ and this windows 7 64 bit on my new ASUS is even worse than the old machines with XP. I have written to ASUS and they simply say "We don't support Linux" and while Ralink's website says they do support Linux I can't get anyone to tell me what model Ralink card might be in my machine. Is anyone out there who might be able to give me some useful advice???? Here is the answer to command lspci nn && lsusb && lsmod && rfkill list all: di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 di,snd_seq snd 54244 16 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device uvcvideo 57374 0 videodev 34361 1 uvcvideo v4l1_compat 13251 2 uvcvideo,videodev soundcore 6620 1 snd snd_page_alloc 7076 2 snd_hda_intel,snd_pcm psmouse 63677 0 serio_raw 3978 0 lp 7028 0 parport 32635 2 ppdev,lp fbcon 35102 71 tileblit 1999 1 fbcon font 7557 1 fbcon bitblit 4707 1 fbcon softcursor 1189 1 bitblit video 17375 0 output 1871 1 video vga16fb 11385 1 vgastate 8961 1 vga16fb ahci 32360 2 Edit #2 lspci 00:00.0 Host bridge: Intel Corporation Device 0104 (rev 09) 00:02.0 VGA compatible controller: Intel Corporation Device 0116 (rev 09) 00:16.0 Communication controller: Intel Corporation Cougar Point HECI Controller #1 (rev 04) 00:1a.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #2 (rev 05) 00:1b.0 Audio device: Intel Corporation Cougar Point High Definition Audio Controller (rev 05) 00:1c.0 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 1 (rev b5) 00:1c.1 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 2 (rev b5) 00:1c.5 PCI bridge: Intel Corporation Cougar Point PCI Express Root Port 6 (rev b5) 00:1d.0 USB Controller: Intel Corporation Cougar Point USB Enhanced Host Controller #1 (rev 05) 00:1f.0 ISA bridge: Intel Corporation Device 1c49 (rev 05) 00:1f.2 SATA controller: Intel Corporation Cougar Point 6 port SATA AHCI Controller (rev 05) 00:1f.3 SMBus: Intel Corporation Cougar Point SMBus Controller (rev 05) 02:00.0 Network controller: RaLink Device 5390 03:00.0 Ethernet controller: Atheros Communications Device 1083 (rev c0) lsusb Bus 002 Device 002: ID 8087:0024 Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 001 Device 003: ID 13d3:5710 IMC Networks Bus 001 Device 002: ID 8087:0024 Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Thanks for the suggestion because this gave me a model for Ralink RT5390. I have now gone to Ralink.com and downloaded (via Windows 7) the driver package (it is a bz2 file). I hope I can figure out how to install it. And FYI - I was not able to run su (not authorized?) and dmidecode didn't exist (probably needs to be downloaded BUT no internet yet in Ubuntu)

    Read the article

  • Which pattern should be used for editing properties with modal view controller on iPhone?

    - by Matthew Daugherty
    I am looking for a good pattern for performing basic property editing via a modal view on the iPhone. Assume I am putting together an application that works like the Contacts application. The "detail" view controller displays all of the contact's properties in a UITableView. When the UITableView goes into edit mode a disclosure icon is displayed in the cells. Clicking a cell causes a modal "editor" view controller to display a view that allows the user to modify the selected property. This view will often contain only a single text box or picker. The user clicks Cancel/Save and the "editor" view is dismissed and the "detail" view is updated. In this scenario, which view is responsible for updating the model? The "editor" view could update the property directly using Key-Value Coding. This appears in the CoreDataBooks example. This makes sense to me on some level because it treats the property as the model for the editor view controller. However, this is not the pattern suggested by the View Controller Programming Guide. It suggests that the "editor" view controller should define a protocol that the "detail" controller adopts. When the user indicates they are done with the edit, the "detail" view controller is called back with the entered value and it dismisses the "editor" view. Using this approach the "detail" controller updates the model. This approach seems problematic if you are using the same "editor" view for multiple properties since there is only a single call-back method. Would love to get some feedback on what approach works best.

    Read the article

  • DOJO : How do you reinitiate form elements after ajax call ?

    - by Dural
    I'm trying to do a couple of things using Zend Framework & Dojo Toolkit, and any help would be appreciated. Here's the problem: I have a form that is rendered with the Zend Framework form class, which has an ajax radio button selection. Clicking one of these radio buttons will send an ajax request to another controller, which has no layout, just a rendered form. The ajax request will then populate a div with the new form options. Problem is, when I replace the innerHTML of the div with the ajax response, all the form inputs and elements are not inheriting the same Dojo styling and form validation. I was wondering if there is a way to reinitate form elements after an ajax call? I have tried to use the code attached which I found and modified slightly for this example, however it did not work. If I use the line dojo.parser.parse( div ); nothing changes (rg_adress in the example is the ID of a form element that is placed on the DOM). Here is the console.log of rg_address: <input type="text" dojotype="dijit.form.ValidationTextBox" required="1" invalidmessage="The first name of the recipient" value="" name="rg_address" id="rg_address" class="textbox"/> onClick=' dojo.xhrGet( { url: "/transfer/newrecipient/", handleAs: "text", timeout: 10000, // Time in milliseconds // The LOAD function will be called on a successful response. load: function(response, ioArgs) { $("#newRecipient").html(response); $("#newPayMethod").html(""); $("#newPayDetail").html(""); var div = dojo.byId("rg_address"); console.log( div ); dojo.parser.parse( div ); return response; }, // The ERROR function will be called in an error case. error: function(response, ioArgs) { $("#newRecipient").html("Error loading registration form"); $("#newPayMethod").html(""); $("#newPayDetail").html(""); return response; } });' Thanks, Dural

    Read the article

  • PHPUnit and autoloaders: Determining whether code is running in test-scope?

    - by pinkgothic
    Premise I know that writing code to act differently when a test is run is hilariously bad practise, but I may've actually come across a scenario in which it may be necessary. Specifically, I'm trying to test a very specific wrapper for HTML Purifier in the Zend framework - a View Helper, to be exact. The HTML Purifier autoloader is necessary because it uses a different logic to the autoloaders we otherwise have. Problem require()-ing the autoloader at the top of my View Helper class, gives me the following in test-scope: HTML Purifier autoloader registrar is not compatible with non-static object methods due to PHP Bug #44144; Please do not use HTMLPurifier.autoload.php (or any file that includes this file); instead, place the code: spl_autoload_register(array('HTMLPurifier_Bootstrap', 'autoload')) after your own autoloaders. Replacing the require() with spl_autoload_register(array('HTMLPurifier_Bootstrap', 'autoload')) as advertised means the test runs fine, but the View Helper dies a terrible death claiming: Zend_Log[3707]: ErrorController caught LogicException "Passed array does not specify an existing static method (class 'HTMLPurifier_Bootstrap' not found)" (Our test folder structure is slightly different to our Zend folder structure by necessity.) Question(s) After tinkering with it, I'm thinking I'll need to pick an autoloader-loading depending on whether things are in the test scope or not. Do I have another option to include HTMLPurifier's autoloading routine in both cases that I'm not seeing due to tunnel vision? If not, do I have to find a means to differentiate between test-environment and production-environment this with my own code (e.g. APPLICATION_ENV) - or does PHPUnit support this godawful hackery of mine natively by setting a constant that I could check whether its been defined(), or similar shenanigans? (My Google-fu here is weak! I'm probably just doing it wrong.)

    Read the article

  • Intermittent asp.net mvc exception: “A public action method ABC could not be found on controller XYZ

    - by Chris Schoon
    Hi, I'm getting an intermittent exception saying that asp.net mvc can’t find the action method. Here’s the exception: A public action method 'Fill' could not be found on controller 'Schoon.Form.Web.Controllers.ChrisController'. I think I have the routing set up correctly because this application works most of the time. Here is the controller’s action method. [ActionName("Fill")] [AcceptVerbs(HttpVerbs.Get | HttpVerbs.Post), UserIdFilter, DTOFilter] public ActionResult Fill(int userId, int subscriberId, DisplayMode? mode) { //… } The route: routes.MapRoute( "SchoonForm", "Form/Fill/{subscriberId}", new { controller = "ChrisController", action = "Fill" }, new { subscriberId = @"\d+" } ); And here is the stack: System.Web.HttpException: A public action method 'Fill' could not be found on controller 'Schoon.Form.Web.Controllers.ChrisController'. at System.Web.Mvc.Controller.HandleUnknownAction(String actionName) in C:\dev\ThirdParty\MvcDev\src\SystemWebMvc\Mvc\Controller.cs:line 197 at System.Web.Mvc.Controller.ExecuteCore() in C:\dev\ThirdParty\MvcDev\src\SystemWebMvc\Mvc\Controller.cs:line 164 at System.Web.Mvc.ControllerBase.Execute(RequestContext requestContext) in C:\dev\ThirdParty\MvcDev\src\SystemWebMvc\Mvc\ControllerBase.cs:line 76 at System.Web.Mvc.ControllerBase.System.Web.Mvc.IController.Execute(RequestContext requestContext) in C:\dev\ThirdParty\MvcDev\src\SystemWebMvc\Mvc\ControllerBase.cs:line 87 at System.Web.Mvc.MvcHandler.ProcessRequest(HttpContextBase httpContext) in C:\dev\ThirdParty\MvcDev\src\SystemWebMvc\Mvc\MvcHandler.cs:line 80 at System.Web.Mvc.MvcHandler.ProcessRequest(HttpContext httpContext) in C:\dev\ThirdParty\MvcDev\src\SystemWebMvc\Mvc\MvcHandler.cs:line 68 at System.Web.Mvc.MvcHandler.System.Web.IHttpHandler.ProcessRequest(HttpContext httpContext) in C:\dev\ThirdParty\MvcDev\src\SystemWebMvc\Mvc\MvcHandler.cs:line 104 at System.Web.HttpApplication.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) Here is an example of my filters they all work the same way: public class UserIdFilter : ActionFilterAttribute { public override void OnActionExecuting(ActionExecutingContext filterContext) { const string Key = "userId"; if (filterContext.ActionParameters.ContainsKey(Key)) { filterContext.ActionParameters[Key] = // get the user id from session or cookie } base.OnActionExecuting(filterContext); } } Thanks, Chris

    Read the article

  • ZF2 - How to use the Hydrator/exchangeArray() to populate a nested object

    - by Dominic Watson
    I've got an object with values that are stored in my database. My object also contains another object which is stored in the database using just the ID of it (foreign key). http://framework.zend.com/manual/2.0/en/modules/zend.stdlib.hydrator.html Before the Hydrator/exchangeArray functionality in ZF2 you would use a Mapper to grab everything you need to create the object. Now I'm trying to eliminate this extra layer by just using Hydration/exchangeArray to populate my objects but am a bit stuck on creating the nested object. Should my entity have the Inner object's table injected into it so I can create it if the ID of it is passed to my 'exchangeArray' ? Here are example entities as an example. // Village id, name, position, square_id // Map Square id, name, type Upon sending square_id to my Village's exchangeArray() function. It would get the mapTable and use hydrator to pull in the square using the ID I have. It doesn't seem right to be to have mapper instances inside my entity as I thought they should be disconnected from anything but it's own entity specific parameters and functionality?

    Read the article

  • setMessage for Zend_Validate_EmailAddress doesn't work

    - by iSenne
    Hello everybody. I have a form and I want to set my custom errors in it. I am using Zend, and I have the following code... //Create validators $formMustBeEmail = new Zend_Validate_EmailAddress(); $formMustBeEmail->setMessage(array( Zend_Validate_EmailAddress::INVALID => "1. Invalid type given, value should be a string", Zend_Validate_EmailAddress::INVALID_FORMAT => "2. '%value%' is no valid email address in the basic format local-part@hostname", Zend_Validate_EmailAddress::INVALID_HOSTNAME => "3. '%hostname%' is no valid hostname for email address '%value%'", Zend_Validate_EmailAddress::INVALID_MX_RECORD => "4. '%hostname%' does not appear to have a valid MX record for the email address '%value%'", Zend_Validate_EmailAddress::INVALID_SEGMENT => "5. '%hostname%' is not in a routable network segment. The email address '%value%' should not be resolved from public network.", Zend_Validate_EmailAddress::DOT_ATOM => "6. '%localPart%' can not be matched against dot-atom format", Zend_Validate_EmailAddress::QUOTED_STRING => "7. '%localPart%' can not be matched against quoted-string format", Zend_Validate_EmailAddress::INVALID_LOCAL_PART => "8. '%localPart%' is no valid local part for email address '%value%'", Zend_Validate_EmailAddress::LENGTH_EXCEEDED => "9. '%value%' exceeds the allowed length", Then I make the form... $this->addElement('text', 'email'); $emailElement = $this->getElement('email'); $emailElement ->setLabel('Emailadres') ->setOrder(1) ->setRequired(true) ->addValidator($formMustBeTest) ->addValidator($formMustBeEmail) ->addFilter(new Zend_Filter_StripTags()); But it doesn't work. I still get the normal errors made by Zend. Can anyone see what I am doing wrong? Tnx in advanced...

    Read the article

  • How to use StructureMap to inject repository classes to the controller?

    - by Lorenzo
    In the current application I am working on I have a custom ControllerFactory class that create a controller and automatically sets the Elmah ErrorHandler. public class BaseControllerFactory : DefaultControllerFactory { public override IController CreateController( RequestContext requestContext, string controllerName ) { var controller = base.CreateController( requestContext, controllerName ); var c = controller as Controller; if ( c != null ) { c.ActionInvoker = new ErrorHandlingActionInvoker( new HandleErrorWithElmahAttribute() ); } return controller; } protected override IController GetControllerInstance( RequestContext requestContext, Type controllerType ) { try { if ( ( requestContext == null ) || ( controllerType == null ) ) return base.GetControllerInstance( requestContext, controllerType ); return (Controller)ObjectFactory.GetInstance( controllerType ); } catch ( StructureMapException ) { System.Diagnostics.Debug.WriteLine( ObjectFactory.WhatDoIHave() ); throw new Exception( ObjectFactory.WhatDoIHave() ); } } } I would like to use StructureMap to inject some code in my controllers. For example I would like to automatically inject repository classes in them. I have already created my repository classes and also I have added a constructor to the controller that receive the repository class public FirmController( IContactRepository contactRepository ) { _contactRepository = contactRepository; } I have then registered the type within StructureMap ObjectFactory.Initialize( x => { x.For<IContactRepository>().Use<MyContactRepository>(); }); How should I change the code in the CreateController method to have the IContactRepository concrete class injected in the FirmController? EDIT: I have changed the BaseControllerFactory to use Structuremap. But I get an exception on the line return (Controller)ObjectFactory.GetInstance( controllerType ); Any hint?

    Read the article

  • Need some advice on MVC separation..

    - by Zenph
    I should note I am using Zend Framework. Although this shouldn't affect the concrete answer, it does mean there are several places I can implement my following method (action helper, controller etc). The issue is I have buildOptions() and parseOptions() method which takes $_GET/$_POST variables based on a 'tag' and builds rules which are then used in a select query. An example would be ?modelSort=id&modelOrder=asc The 'model' in the above obviously relates to the particular model, and it used as a 'tag' so that I can for example also have model2Sort and model2Order so there is no conflict between parameters. However, the trouble I am having now is where should these methods go? They are generally dealing with request params. I have been reading a lot about fat model, thin controller. Should this be in an abstract model. My thinking was that if it were, I would do something like: (note, I know I wouldn't call directly like this. Method would be used by child classes) $abstractModel-buildOptions($params); Where 'params' could be anything, like the request parameters $_GET or $_POST: $abstractModel-buildOptions($_GET); Now from what I can see the model is not inherintly dealing with request variables but rather parameters passed to the method. Advice? Where does this method belong? Model, Controller? Specifically on Zend, should it be an action helper, plugin, within an abstract model? Appreciate any advice.

    Read the article

  • How to expand row in a grid using rowexpander plugin Extjs 4.1.1

    - by Waseem
    How to expand row in a grid using rowexpander plugin? I am using the following code in my controller 'editbasicinfotitlegrid gridview' : { afterrender:this.expandAll } expandAll: function(){ var titlesGrid = Ext.getCmp('editBasicInfoTitleGrid'); var expander = titlesGrid.getPlugin('myRowExpander'); console.log(titlesGrid.plugins[0]); expander.toggleRow(0); } But this code gives me the following error Uncaught TypeError: Cannot call method 'down' of null

    Read the article

  • Unit testing in Web2py

    - by Wraith
    I'm following the instructions from this post but cannot get my methods recognized globally. The error message: ERROR: test_suggest_performer (__builtin__.TestSearch) ---------------------------------------------------------------------- Traceback (most recent call last): File "applications/myapp/tests/test_search.py", line 24, in test_suggest_performer suggs = suggest_flavors("straw") NameError: global name 'suggest_flavors' is not defined My test file: import unittest from gluon.globals import Request db = test_db execfile("applications/myapp/controllers/search.py", globals()) class TestSearch(unittest.TestCase): def setUp(self): request = Request() def test_suggest_flavors(self): suggs = suggest_flavors("straw") self.assertEqual(len(suggs), 1) self.assertEqual(suggs[0][1], 'Strawberry') My controller: def suggest_flavors(term): return [] Has anyone successfully completed unit testing like this in web2py?

    Read the article

  • Setting up linux based small office network

    - by Miki
    I like to setup a Server and Workstation sort of network in linux (like we have Domain Controller in windows) where all the desktops login where authenicated with server, how this can be done. I prefer CENTOS 5.4 for server and FEDORA 12 for dektop Thanks in advance

    Read the article

< Previous Page | 84 85 86 87 88 89 90 91 92 93 94 95  | Next Page >