Search Results

Search found 2556 results on 103 pages for 'middle'.

Page 89/103 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • Gmail Sync on Android phone

    - by sunocky
    Android has the Gmail push features, which means the new message arrives in the mailbox without checking or refreshing the mailbox. As I understand, the sync processes are like these: 1) User turns on the sync 2) There will be a alert msg and the sync flag in the Gmail DB of this device will be True 3) When a new email reach the Gmail Server, it will check if the device sync value, if it's True then send the email OK, here, I don't quite understand how exactly does it work, For a WiFi and cell signal connection, does the phone has a TCP socket open keep listening to the Gmail Server, or when a new email arrives the Server send a SMS alert to the phone, and then it will open the data channel to fetch the email? Are the two ways of connections have different approaches? And second question is which method is the priority one? Say when you are in the middle of receiving data(emails), and suddenly the phone connect to a wireless network, will the data socket be closed and then reopened for the WiFi one? What's the behavior for the case when carrier's data channel and WiFi flips? I have also downloaded the source code, anyone knows which part should I be looking into in order to solves my questions? I found a folder called "email" inside the folder "package", should I be looking at its code? I know I asked quite some questions here, I'd appreciate if you know the answer for any of them, thanks very much!

    Read the article

  • How do I split ONE array to two separate arrays based on magnitude size and a threshold?

    - by youhaveaBigego
    I have an array which has BIG numbers and small numbers in it. I got it from after running a log from WireShark. It is the total number of Bytes of TCP traffic. But Wireshark does not discriminate(it would actually try, and hence it will tell you the traffic stats of ALL types of traffic, but since This is how the Array look like : @Array=qw(10912980 10924534 10913356 10910304 10920426 10900658 10911266 10912088 10928972 10914718 10920770 10897774 10934258 10882186 10874126 8531 8217 3876 8147 8019 68157 3432 3350 3338 3280 3280 7845 7869 3072 3002 2828 8397 1328 1280 1240 1194 1193 1192 1194 6440 1148 1218 4236 1161 1100 1102 1148 1172 6305 1010 5437 3534 4623 4669 3617 4234 959 1121 1121 1075 3122 3076 1020 3030 628 2938 2938 1611 1611 1541 1541 1541 1541 1541 1541 1541 1541 1541 1541 1541 1541 583 370 178) When you look at these this array carefully, one thing is obvious to the human eye. There are really BIG numbers and small numbers. (Basically what I am saying is, there is the 1% class and low income class, no middle class). I want to split the array to two different arrays. That would require me to set a threshold. Array 1 should be ONLY the BIG numbers (10924534-10874126), and array 2 should be the smaller numbers (68157-178). Btw, the array is not sorted. User will NOT input the threshold, and hence should be determined smartly.

    Read the article

  • Limiting number of text lines in a table cell

    - by Kuzco
    I have a table cell where I need to limit the text to a max of two lines. I tried achieving this by placing an inner div with a limited height: div { border: 1px solid #EECCDD; width: 100px; height: 40px; overflow: hidden; } <div> <p>bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla bla</p> </div> <div> <p>bla bla bla bla</p> </div> However, in this case the cells which have only one line of text are not vertically aligned to the middle. I know there are ways to vertically align a text within a div, but most of the ones I found seemed a bit complicated and/or hacky (like this one), and felt like a bit of an overkill. Is there a different way to effectively limit the number of lines inside the cell, or a simple way to align the text in the way I did it?

    Read the article

  • Div Container Cleanup?

    - by Nto
    Just wondering if its possible to cleanup (less code needed to do the same thing) making this div container. Basically it's just a div with a background image however the top & bottom of the div have rounded graphical corners which is why I have a top, middle, and bottom div inside the container div. <div class="fbox"> <div class="ftop"></div> <div class="fmid"> Fullbox Text Goes Here </div> <div class="fbot"></div> </div> Css: .fbox { width: 934px; margin: 0 auto; opacity: 0.70; } .ftop { width: 934px; background:url(../images/cb/full.png) no-repeat 0 -34px; height: 17px; margin:0 } .fmid { width: 894px; padding-left: 20px; padding-right: 20px; background:url(../images/cb/fullmid.png) repeat-y; min-height: 50px; margin:0 } .fbot { width: 934px; background:url(../images/cb/full.png) no-repeat 0 -17px; height: 17px; margin:0 } Outcome: http://img709.imageshack.us/img709/6681/fbox.jpg

    Read the article

  • QLearning and never-ending episodes

    - by devoured elysium
    Let's imagine we have an (x,y) plane where a robot can move. Now we define the middle of our world as the goal state, which means that we are going to give a reward of 100 to our robot once it reaches that state. Now, let's say that there are 4 states(which I will call A,B,C,D) that can lead to the goal state. The first time we are in A and go to the goal state, we will update our QValues table as following: Q(state = A, action = going to goal state) = 100 + 0 One of 2 things can happen. I can end the episode here, and start a different one where the robot has to find again the goal state, or I can continue exploring the world even after I found the goal state. If I try to do this, I see a problem though. If I am in the goal state and go back to state A, it's Qvalue will be the following: Q(state = goalState, action = going to A) = 0 + gamma * 100 Now, if I try to go again to the goal state from A: Q(state = A, action = going to goal state) = 100 + gamma * (gamma * 100) Which means that if I keep doing this, as 0 <= gamma <= 0, both qValues are going to rise forever. Is this the expected behavior of QLearning? Am I doing something wrong? If this is the expected behavior, can't this lead to problems? I know that probabilistically, all the 4 states(A,B,C and D), will grow at the same rate, but even so it kinda bugs me having them growing forever. The ideia of allowing the agent to continue exploring even after finding the goal has to do with that the nearer he is from the goal state, the more likely it is to being in states that can be updated at the moment.

    Read the article

  • Timer not beginning from 00:00

    - by studentProgrammer
    I have a Game in which there is a timer involved. For each two minutes that passes a new round between different players begins. So, I have a text box starting from 00:00 and changes each second until it is equal to 02:00. Now, I want to save the state of the game in the middle of a round if the user closes the form. What I need to do is that upon loading, the textbox starts at the time that the user left the game the last time and continue up till 02:00 normally. How can I do this? This is what I have until now where Tournament is the Form public Tournament() { _timer = new System.Windows.Forms.Timer(); _timer.Interval = 1000; _timer.Tick += Timer_Tick; _myDateTime = DateTime.Now; newDate = new DateTime(); newDate = newDate.AddMinutes(2.00); _timer.Start(); InitializeComponent(); } void Timer_Tick(object sender, EventArgs e) { var diff = DateTime.Now.Subtract(_myDateTime); this.textBox1.Text = diff.ToString(@"mm\:ss"); DateTime dt = Convert.ToDateTime(diff.ToString()); if (newDate.Minute == dt.Minute) { _timer.Stop(); _myDateTime = DateTime.Now; displayPointsOrResults(); this.textBox1.Text = diff.ToString(@"mm\:ss"); } } In my LoadGame method: where timePassed is what I have written in the text box string[] splitted6 = timePassed.Split(':'); if (splitted6[0] == "00") { int remainingTime = 120 - Convert.ToInt32(splitted6[1]); DateTime time = DateTime.Now.Date; time = time.AddMinutes(remainingTime); _myDateTime = time; } else { int leftTime = Convert.ToInt32(splitted[0].Trim('0') + splitted[1]); int remainingTime = 120 - leftTime; DateTime time = DateTime.Now.Date; time = time.AddMinutes(remainingTime); _myDateTime = time; }

    Read the article

  • php parsing csv with ftell

    - by Robert82
    I have a 500mb csv file with over 500,000 lines, each with 80 fields. I am using fget to process the file line by line. $col1 = array(); while (($row = fgetcsv($handle, 1000, ",")) !== FALSE) { $col1[] = $row[0]; } Because of an execution time limit on the PHP file by my hosting provider (120 seconds), I can't process the whole file in one run. I tried using ftell() and fseek() to remember the last position for restart. The trouble is, sometimes the ftell() position is in the middle of a row, and resuming means missing the first half of the row. Is there an elegant way to know the last line successfully processed, and resume from the one after it? I realize I can do a simple counter, and then loop through to that point again, but that would produce diminishing returns on the rows I can process towards the end of the file. Is there something like ftell() and fseek() that would work in my case? Or a way to limit ftell() to return the pointer for the end of the previous line?

    Read the article

  • checkboxes and buttons enable

    - by anshka_3033 3033
    i have 2 checkboxes and 2 buttons below the check boxes. on opening the page ,checkbox1 should be enabled and other check box n buttons should be disabled.after clicking on 1st checkbox 2nd checkbox should be enabled and 1 st check box should be disabled and buttons remain disabled.after clicking on 2nd checkbox 2 buttons(approve,Deny) should be enabled and 2 checkboxes should be disabled.so please help me in doing this.i used below code for creating checkboxes and button. i need j script for this <tr> <form ACTION="jspCheckBox.jsp"> SC Information Received <input type="checkbox" value="SC Information received"> Validation Begun <input type="checkbox" value="Validate" > </form> </tr> <tr> <td valign="middle" align="left" style="padding-left:10px;" nowrap> <button type="button" class="btn" name="btnApprove" onclick="approve();">Approve</button> </td> <td> <button type="button" class="btn" name="btnDeny" onclick="deny();">Deny</button> </td> </tr>

    Read the article

  • How to get an inner div to fill the entire wrapper div?

    - by ripper234
    I have the following html code: <div class="outer ui-draggable" style="position: relative;"> <div class="inner">Foo bar</div> </div> With this CSS: .outer { background-color: #F7F085; margin: 5px; height: 100px; width: 150px; text-align:center; vertical-align:text-bottom; } .outer .inner { display:inline; vertical-align:middle; height: 100px; width: 150px; } I would like the inner div to fill the outer div completely - the text block should be an entire 100X150 box. The problem is that this code doesn't produce the desired effect. The outer div is indeed the correct size, but the inner div seems to only fill a small area at the top of the outer div. I also tried using height:inherit and width:inherit instead of specifying a size.

    Read the article

  • How to arrange HTML5 web page elements?

    - by Argus9
    I'm trying to make a sample web page to get acquainted with HTML5, and I'd like to try replicating Facebook's page layout; that is, the header that spans the entire width of the screen, a small footer at the bottom, and a three-column main body, consisting of a list of links on the left, the main content in the middle, and an optional section on the right (for ads, frames, etc.). It's neat and displays well in multiple window sizes. So far, I've tried to accomplish this with a <header>, <footer> and a <nav> and <section> block, respectively. There's a few anomalies with the page, however. The footer (which contains a simple text block with copyright info) appears at the top-right of the page below the header when the window is maximized. On the other hand, when there isn't enough space to display everything in the window, it places the main body text below the section. In other words, it keeps moving elements around to fit the window. Could someone please tell me how I'd achieve the look I'm going for? I've tried playing around with a few CSS attributes I read about through Google, but I'm pretty sure I don't know what I'm doing, and could really use some guidance. Thank you!

    Read the article

  • Jquery .next() function not working

    - by Sundhar
    Guys i am trying to do something like this i have two href and a text box in the middle of those <- TEXT <+ So when i press the - and + the value in the txt must increase or decrease by one " value="<%=addProduct.getInteger("ATR_WebMinQuantity",1)/addProduct.getInteger(MCRConstants.DM_ATR_LEGACY_CASE_VENDOR_PACK_SIZE,1) %" name="ADD_CART_ITEM<quantity" class="text" maxlength="3" / --! and i am using a jquery to + and - the value in the text box. Whenever i press + its happening correctly but for - it takes the TEXT fields name instead of its value . Any solution for this to make it to take the value of the TEXT box Jquery used follows : $(".quantity .subtract").click(function () { var qtyInput = $(this).next('input'); var qty = parseInt(qtyInput.val()); if (qty 1) qtyInput.val(qty - 1); qtyInput.focus(); return false; }); $(".quantity .add").click(function () { var qtyInput = $(this).prev('input'); var qty = parseInt(qtyInput.val()); if (qty >= 0 && (qty + 1 <= 999)) qtyInput.val(qty + 1); qtyInput.focus(); return false; });

    Read the article

  • Why won't ruby recognize Haml under ubuntu64 while using jekyll static blog generator?

    - by oldmanjoyce
    I have been trying, quite unsuccessfully, to run henrik's fork of the jekyll static blog generator on Ubuntu 64-bit. I just can't seem to figure this out and I've tried a bunch of different things. Originally I posted this over at stackoverflow, but this is probably the better spot for it. The base stats of my machine: Ubuntu 9.04, 64 bit, ruby 1.8.7 (2008-08-11 patchlevel 72) [x86_64-linux], rubygems 1.3.1. When I attempt to build the site, this is what happens: $ jekyll --pygments Configuration from ./_config.yml Using Sass for CSS generation You must have the haml gem installed first Using rdiscount for Markdown Building site: . - ./_site /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/core_ext.rb:27:in `method_missing': undefined method 'header' for #, page=# ..... cut ..... (NoMethodError) from (haml):9:in `render' from /home/chris/.gem/gems/haml-2.2.3/lib/haml/engine.rb:167:in 'render' from /home/chris/.gem/gems/haml-2.2.3/lib/haml/engine.rb:167:in 'instance_eval' from /home/chris/.gem/gems/haml-2.2.3/lib/haml/engine.rb:167:in 'render' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/convertible.rb:72:in 'render_haml_in_context' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/convertible.rb:105:in 'do_layout' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/post.rb:226:in 'render' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:172:in 'read_posts' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:171:in 'each' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:171:in 'read_posts' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:210:in 'transform_pages' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/../lib/jekyll/site.rb:126:in 'process' from /home/chris/.gem/gems/henrik-jekyll-0.5.2/bin/jekyll:135 from /home/chris/.gem/bin/jekyll:19:in `load' from /home/chris/.gem/bin/jekyll:19 I added spaces to the left of the ClosedStruct to enable better visibility - sorry that my inline html/formatting isn't perfect. I also cut out some middle text that is just data. $ gem list *** LOCAL GEMS *** actionmailer (2.3.4) actionpack (2.3.4) activerecord (2.3.4) activeresource (2.3.4) activesupport (2.3.4) classifier (1.3.1) directory_watcher (1.2.0) haml (2.2.3) haml-edge (2.3.27) henrik-jekyll (0.5.2) liquid (2.0.0) maruku (0.6.0) open4 (0.9.6) rack (1.0.0) rails (2.3.4) rake (0.8.7) rdiscount (1.3.5) RedCloth (4.2.2) stemmer (1.0.1) syntax (1.0.0) Some showing for path verification: $ echo $PATH /home/chris/.gem/bin:/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games $ which haml /home/chris/.gem/bin/haml $ which jekyll /home/chris/.gem/bin/jekyll

    Read the article

  • Slow Windows Explorer on Windows 7

    - by MadBoy
    I have Laptop with i7 (4 cores), 8GB ram and SSD OCZ Vertex 3 MaxIOPS which in testing that I did just now does 400mb/s+ read/write. However the responsiveness of Windows Explorer is far from being perfect. Opening up Computer, Documents, going into folders is very slow (1-5seconds). I don't have any viruses or spyware and I have tried changing properties to optimize view for General Items. I tried disabling Search Indexer but it made search in Outlook 2010 crawl and didn't bring any other effect. Even double clicking on file takes some time to open things up (like clicking a Word document). I don't have any drives mapped, my computer is not joined to domain. I have multiple VPN connections that I connect to but they all have disabled default gateways. I tried using CC Cleaner or some Windows 7 Tweaks app to disable some things. I am power user using Visual Studio, Tortoise SVN and other developer/administration apps. Any non obvious ideas? Edit: So I've been trying to pinpoint where the issue comes from and it seems that straight after reboot Windows Explorer opens very fast, when I load 3-4 programs (Royal TS, Visual Studio, Outlook) it's noticeably slower and the more programs I have it gets worse. After I start closing programs it starts working better and if I leave 2 open it's fast again. I tried doing some research with DiskMon and other programs from sysinternals but couldn't find anything suspicious. Below are stats during normal usage with a lots of programs open: - Ram usage with a lot of programs open and no swap file (i disabled it for testing): 6.95GB - CPU usage: 15%, none of the cores takes more then 50% (I have VS 2010 open x 4) HD Tune Pro: OCZ-VERTEX3 MI Benchmark Test capacity: full Read transfer rate Transfer Rate Minimum : 363.9 MB/s Transfer Rate Maximum : 505.5 MB/s Transfer Rate Average : Access Time : Burst Rate : CPU Usage : HD Tune Pro: OCZ-VERTEX3 MI File Benchmark Drive C: Transfer rate test File Size: 500 MB Sequential read 484102 KB/s Sequential write 444714 KB/s Random read 7779 IOPS Random write 16888 IOPS Random read (queue depth = 32) 73007 IOPS Random write (queue depth = 32) 69790 IOPS HD Tune Pro: OCZ-VERTEX3 MI Random Access Test capacity: full Read test Transfer size operations / sec avg. access time max. access time avg. speed 512 bytes 3260 IOPS 0.306 ms 2.106 ms 1.592 MB/s 4 KB 4161 IOPS 0.240 ms 2.006 ms 16.256 MB/s 64 KB 2382 IOPS 0.419 ms 2.367 ms 148.934 MB/s 1 MB 449 IOPS 2.225 ms 4.197 ms 449.407 MB/s Random 809 IOPS 1.235 ms 6.551 ms 410.527 MB/s HD Tune Pro: OCZ-VERTEX3 MI Extra Tests Test capacity: full Random seek 3975 IOPS 0.252 ms 1.941 MB/s Random seek 4 KB 4245 IOPS 0.236 ms 16.583 MB/s Butterfly seek 4086 IOPS 0.245 ms 1.995 MB/s Random seek / size 64 KB 3812 IOPS 0.262 ms 58.606 MB/s Random seek / size 8 MB 120 IOPS 8.348 ms 485.737 MB/s Sequential outer 4524 IOPS 0.221 ms 282.721 MB/s Sequential middle 4429 IOPS 0.226 ms 276.818 MB/s Sequential inner 5504 IOPS 0.182 ms 344.000 MB/s Burst rate 4472 IOPS 0.224 ms 279.475 MB/s

    Read the article

  • Link aggregation with freebsd8 and a cicso 3550, what am i doing wrong?

    - by Flamewires
    Hey, I am trying to setup Link Aggrigation with LACP (well, anything that provides increased bandwidth and failover using my setup will work). I'm running FreeBSD 8.0 on 3 machines. M1 is running 2 10/100 ethernetcards setup for link aggrigation using lagg. for reference: ifconfig em0 up ifconfig tx0 up ifconfig create lagg0 ifconfig lagg0 laggproto lacp laggport tx0 laggport em0 192.168.1.16 netmask 255.255.255.0 I plugged them into ports 1 and 2 of a Cicso 3550. then ran: configure terminal interface range Fa0/1 - 2 switchport mode access switchport access vlan 1 channel-group 1 mode active (everythings in vlan 1) Now Im able to connect the other computers to other ports on the switch and failover works great, i can unplug cables in the middle of a transfer and the traffic gets rerouted. However, im not noticing any speed increase. My test setup: load balancing: i tried dst and src on the switch, neither seemed to give me a speed increase. I am SCPing 2 500 meg files from the lagg computer to other computers (one each) which are also running 10/100 full duplex cards. I get transfer speeds of about 11.2-11.4 Mbps to a single host, and about half that (5.9-6.2) Mbps when transferring to both at the same time. From what I understood with destination load balancing the router was suppose to balance traffic headed for 1 computer over 1 port and traffic headed for another over a diff(in this case) the other port. With destination-MAC address forwarding, when packets are forwarded to an EtherChannel, the packets are distributed across the ports in the channel based on the destination host MAC address of the incoming packet. Therefore, packets to the same destination are forwarded over the same port, and packets to a different destination are sent on a different port in the channel. For the 3550 series switch, when source-MAC address forwarding is used, load distribution based on the source and destination IP address is also enabled for routed IP traffic. All routed IP traffic chooses a port based on the source and destination IP address. Packets between two IP hosts always use the same port in the channel, and traffic between any other pair of hosts can use a different port in the channel. (Link) What am i doing wrong/what would i need to do to see a speed increase beyond what i could do with just a single card?

    Read the article

  • Brand new Mac Pro tower fan suddenly runs full-tilt

    - by Caffeine Coma
    My Quad-Core Mac Pro tower is two days old. Initially, I was impressed with how quiet it was compared to my older Macbook Pro. Then on day two, for some reason it started running very loudly. It's not just a "little" loud- my wife walked into the room and asked what the noise was. At first I thought this was just because I was hitting the CPU a bit (importing my iPhone library into iLife '09, and running Eclipse). But now that that's done, Activity Monitor shows a virtually idle CPU; there's nothing running that ought to be causing this, as far as I can tell. I tried powering it off & letting it cool down for a few minutes to no avail; about 10 seconds after powering up, the box gets loud again. I took a look at it with the side cover off, and it seems to be the fan near the top middle, between the power supply and the disk drive. It can't be a dust issue, as the machine is only 2 days old (and I peeked inside anyway just to be sure- clean). I did do a software update over the past 24 hours or so, but I can't say that it occurred immediately after that. I also did a migration of my old apps and data from my MBPro, for what it's worth. Why is it suddenly so loud? How can I monitor the fan speed and various system temperatures? Here's a link to my temps and fan speeds. UPDATE 1: Took it to the Apple Store. They took it in the back (where it's presumably quieter) and ran a fan diagnostic; no problems were found. The guy also told me that it was "a little loud", but normal. I don't buy it. It was virtually silent the first 24 hours I was using it. They would not replace/service it in the store (grrr... that's why I went there, as directed by Apple Care) but said I could get a replacement from the online store, as it was just purchased. I think I will try that. UPDATE 2: Apple is letting me send it back for a replacement. Glad to see so many responses to this question mentioning that the MacPros are usually silent; it's not all just in my head. :-)

    Read the article

  • possible UDP attack on BIND?

    - by Waleed Hamra
    hello everyone, i was surprised last month when my EC2 instance (ubuntu precise server), that is supposed to be under the free tier still, accumulated lots of traffic... today, while checking my current billing statement, i noticed i already have tons of traffic, while still in the middle of the month, and i'm fearing what my bill by the end of the month is going to be... i installed bandwidthd, and after few minutes, i noticed lots of UDP traffic to "108.162.233.15". this is apparently a cloudflare IP, and i don't have anything using cloudflare (as far as i know). so i ran "iftop" to see what ports are being used, and i saw the UDP traffic coming from port 80 to my port 53... why would a webserver query dns? so i stopped bind on my server, and ran it in foreground debugging mode, and saw the following query, being repeated continuously: 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: UDP request 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: request is not signed 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: recursion available 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: query 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: query (cache) 'isc.org/ANY/IN' approved 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: send 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: sendto 17-Nov-2012 12:30:58.216 client 108.162.233.15#80: senddone 17-Nov-2012 12:30:58.217 client 108.162.233.15#80: next 17-Nov-2012 12:30:58.217 client 108.162.233.15#80: endrequest 17-Nov-2012 12:30:58.217 client @0x7fbee05126e0: udprecv 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: UDP request 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: request is not signed 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: recursion available 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: query 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: query (cache) 'isc.org/ANY/IN' approved 17-Nov-2012 12:30:58.343 client 108.162.233.15#80: send 17-Nov-2012 12:30:58.344 client 108.162.233.15#80: sendto 17-Nov-2012 12:30:58.344 client 108.162.233.15#80: senddone 17-Nov-2012 12:30:58.344 client 108.162.233.15#80: next 17-Nov-2012 12:30:58.344 client 108.162.233.15#80: endrequest my question is... is this normal? should i be worried? or is this completely irrelevant to my data charges, and i should wait to see more data from bandwidthd? thank you in advance.

    Read the article

  • "Hostile" network in the company - please comment on a security setup

    - by TomTom
    I have a little specific problem here that I want (need) to solve in a satisfactory way. My company has multiple (IPv4) networks that are controlled by our router sitting in the middle. Typical smaller shop setup. There is now one additional network that has an IP Range OUTSIDE of our control, connected to the internet with another router OUTSIDE of our control. Call it a project network that is part of another companies network and combined via VPN they set up. This means: They control the router that is used for this network and They can reconfigure things so that they can access the machines in this network. The network is physically split on our end through some VLAN capable switches as it covers three locations. At one end there is the router the other company controls. I Need / want to give the machines used in this network access to my company network. In fact, it may be good to make them part of my active directory domain. The people working on those machines are part of my company. BUT - I need to do so without compromising the security of my company network from outside influence. Any sort of router integration using the externally controlled router is out by this idea So, my idea is this: We accept the IPv4 address space and network topology in this network is not under our control. We seek alternatives to integrate those machines into our company network. The 2 concepts I came up with are: Use some sort of VPN - have the machines log into VPN. Thanks to them using modern windows, this could be transparent DirectAccess. This essentially treats the other IP space not different than any restaurant network a laptop of the company goes in. Alternatively - establish IPv6 routing to this ethernet segment. But - and this is a trick - block all IPv6 packets in the switch before they hit the third party controlled router, so that even IF they turn on IPv6 on that thing (not used now, but they could do it) they would get not a single packet. The switch can nicely do that by pulling all IPv6 traffic coming to that port into a separate VLAN (based on ethernet protocol type). Anyone sees a problem with using he switch to isolate the outer from IPv6? Any security hole? It is sad we have to treat this network as hostile - would be a lot easier - but the support personnel there is of "known dubious quality" and the legal side is clear - we can not fulfill our obligations when we integrate them into our company while they are under a jurisdiction we don't have a say in.

    Read the article

  • IIS/ASP.NET performance incident - Perfmon Current Annonymous Users going through roof but Requests/sec low

    - by Laurence
    Setup: ASP.NET 4.0 website on IIS 6.0 on Win 2003 64 bit, 8xCPUs, 16GB memory, separate SQL 2005 DB server. Had a serious slowdown today with any otherwise fairly well performing ASP.NET site. For a period of a couple of hours all page requests were taking a very long time to be served - e.g. 30-60s compared to usual 2s. The w3wp.exe's CPU and memory usage on the webserver was not much higher than normal. The application pool was not in the middle of recycling (and it hadn't recycled for several hours). Bottlenecks in the database were ruled out - no blocks occurring and query results were being returned quickly. I couldn't make any sense of it and set up the following Perfmon counters: Current Anonymous Users (for site in question) Get requests/sec (ditto) Requests/sec for the ASP.NET application running the site Get requests/sec was averaging 100-150. Requests/sec for ASP.NET was averaging 5-10. However Current Anonymous Users was around 200. And then as I was watching, the Current Anonymous Users began to climb steeply going up to about 500 within a few minutes. All this time Get requests/sec & Requests/sec for ASP.NET was if anything going down. I did a whole load of things (in a panic!) to try to get the site working, like shutting it down, recycling the app pool, and adding another worker process to the pool. I also extended the expiration time for content (in IIS under HTTP Headers) in an attempt to lower the number of requests for static files (there are a lot of images on the site). The site is now back to normal, and the counters are fairly steady and reading (added Current Connections counter): Current Anonymous Users : average 30 Get requests/sec : average 100 Requests/sec for ASP.NET : 5 Current Connections : average 300 I have also observed an inverse relationship between Get requests/sec & Current Anonymous Users. Usually both are fairly steady but there will be short periods when Get requests/sec will go down dramatically and Current Anonymous Users will go up in a perfect mirror image. Then they will flip back to their usual levels. So, my questions are: Thinking of the original performance issue - if w3wp.exe CPU, memory usage were normal and there was no DB bottleneck, what could explain page requests taking 20 times longer to be served than usual? What other counters should I be looking at if this happens again? What explains the inverse relationship between Get requests/sec & Current Anonymous Users? What could explain Current Anonymous Users going from 200 to 500 within a few minutes? Many thanks for any insight into this.

    Read the article

  • PDF Corruption When Sending with Microsoft Products

    - by Winner
    I have the same PDF corruption problem in two different offices that I am the tech support for. Office 1: Started in the middle of December. PDF received from outside the office and is viewable with no problems. I have no control over how it is created. If it is forwarded to anyone else, the PDF is corrupted. I have forwarded it to multiple people in the office. I have tried viewing with Reader 8, 9, Sumatra and Fox IT. I have tried forwarding to Gmail and their viewer says it is corrupted. If I save the PDF and create a new email, it will be corrupted when sent using Outlook 2003, Outlook 2007, Microsoft Live Mail and Outlook Express. If I create the email using Thunderbird 3, Gmail or the webclient Iclient for IPSwitch IMail it will not be corrupted. I have confirmed the same results when using our IMail SMTP and also Using Gmail as the SMTP server. To be clear, if I created in Thunderbird, Gmail or Iclient and received on any of the MS products, it will be viewable. This office receives PDFs daily from multiple sources. There is only a small subset that are having this problem. So far they problem PDFs are from two different companies they deal with, but not all of the PDFs are bad. Office 2: PDFs are created by a management system. I'm not sure what engine is used to create them. Same exact same issues. At both offices, I noticed that the file size is wrong. One small PDF the proper file size is 12kb for the PDF when it's viewable, when it shows up corrupted it is only 8kb. We handle the email for both offices. Both are POP servers, not Exchange. IMail was updated after these issues start. I have tried different SMTP servers and it still seems to happen only when using Microsoft products to send. Anyone else having problems with PDFs getting corrupted? Any ideas how to find out a resolution?

    Read the article

  • No login prompt displayed after updating Ubuntu 10.04, broken gdm

    - by cliff
    So here's what happens: I updated my system the other day, was prompted for a reboot for the update to complete but was in the middle of working so I delayed it until after I was done. I reboot and it's broken :(. It appears to boot normally, with the following exceptions: The purple Ubuntu load screen no longer displays (though it did for the first couple of times I tried to get in). I hear the login prompt sound, but no login prompt appears. Nor is it simply "invisible" - pressing enter, typing my password, and pressing enter again do nothing. Normally my Bluetooth mouse is functional at this point, but it is not. GRUB displays recovery options for my current kernel, and for an older one (2.6.32-24). Trying to boot into .32-24 gives me an error saying "udevadm can't do something while udev is not configured". So I try solutions listed here: http://superuser.com/questions/195786/ubuntu-update-went-wrong-pc-doesnt-boot-how-can-i-repair-it Nothing I tried seemed to work, and after further Googling my hunch is that it's a problem with gdm. Please correct me if I'm wrong, I don't know all that much about how Linux/Ubuntu systems work just yet. Things I'm able to do: Boot to a live CD Ctrl-Alt-F2 after that login sound plays brings me to a console login, which I can successfully do (it's how I tried the solutions above). This works only under the current kernel. A hack I'd be willing to explore is removing the login prompt from the console, but I'd prefer to "simply" fix what's wrong. Like that guy, I need to repair the system rather than reinstall. System: Dell Inspiron 1525 Core 2 Duo Proprietary Driver for Broadcom 43xx wireless Dual-boot with Windows 7 (which is how I'm posting this, unfortunately I only have this machine and any experimenting requires constant reboots into Windows/brokenbuntu) Last package installed was Moonlight, but it appeared to install properly. Kernel: 2.6.32-25 Edit: After working with Karl's suggestions, it seems that the problem is with gdm. Error exit status 245 when attempting to sudo apt-get install --reinstall gdm, also an error processing gdm when running sudo apt-get -f install. How do I reinstall or repair gdm so that I can get back into my machine?

    Read the article

  • ISC DHCP - Force clients to get a new IP address, instead of the being re-issued their previous lease's IP

    - by kce
    We are in the middle of a migration of our DHCP and DNS services from a Debian-based server to a Windows Server 2008 R2 implementation. The Debian server is running isc-dhcpd-V3.1.1. All of workstations are configured to have fixed-addresses between .3 and .40 (the motivation behind that choice is mostly management/political much like here). DHCP leases are given out in the range of .100 to .175. Statically configured servers live in the .200 block and above (which is mostly empty). When we move to the Windows platform, management/political considerations require me to move the IP ranges around again. We would like to keep .1 - .10 reserved for network appliances, switches, and other infrastructure. .200 will remain designated for servers. The addressing space in between should be available to clients and IPs should be dynamically allocated (Edit: instead of automatic as originally mentioned) by the server. My Address Pool on the Windows Server looks like this: 192.168.0.1 192.168.0.254 (Address range for distribution) 192.168.0.1 192.168.0.10 (IP addresses excluded from distribution) 192.168.0.200 192.168.0.254 (IP addresses excluded from distribution) Currently, we have all of our clients still on the .3 - .40 range, and a few machines still active in the .100 - .175 (although there are lots devices that are powered off that still have expired leases with IPs from that range). Since the lease "database" isn't shared between the old and new DHCP server how can I prevent clients from receiving a lease with an IP address that is currently being held by client with a non-expired lease from the old DHCP server? If I just expand the range on the Debian DHCP server to be 192.168.0.10 - 192.168.0.199 is there a way to force clients to not re-use their old IP address when they send their DHCPDISCOVER? Can I make the Windows DHCP server be authoritiative like the ISC implementation? The dhcpd.conf from the Debian server: ddns-update-style none; authoritative; default-lease-time 43200; #12 hours max-lease-time 86400; #24 hours subnet 192.168.0.0 netmask 255.255.255.0 { option routers 192.168.0.1; option subnet-mask 255.255.255.0; option broadcast-address 192.168.0.255; range 192.168.0.100 192.168.0.175; } host workstation-1 { hardware ethernet 00:11:22:33:44:55; fixed-address 192.168.0.3; } ... and so on until 192.168.0.40

    Read the article

  • udp expected behaviour not responding to test result

    - by ernst
    I have a local network topology that is structured as follows: three hosts and a switch in the middle. I am using a switch that supports 10,100,1000 Mbit/s full/half duplex connection. I have configured the hosts with a static ip 172.16.0.1-2-3/25. This is the output of ifconfig eth0 Link encap: Ethernet HWaddr ***** inet addr:172.16.0.3 Bcast:172.16.0.127 Mask:255.255.255.128 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:16 The output on H1 and H2 is perfectly matchable They are mutually reachable since i have tested the network with ping. I have forced the ethernet interface to work at 10M with ethtool -s eth0 speed 10 duplex full autoneg on this is the output of ethtool eth0 supported ports: [ TP ] Supported link modes: 10baseT/Half 10baseT/Full 100baseT/Half 100baseT/Full 1000baseT/Half 1000baseT/Full S upported pause frame use: No Supports auto-negotiation: Yes Advertised link modes: 10baseT/Full Advertised pause frame use: Symmetric A dvertised auto-negotiation: Yes Speed: 10Mb/s Duplex: Full Port: Twisted Pair PHYAD: 1 Transceiver: internal Auto-negotiation: on MDI-X: Unknown Supports Wake-on: g Wake-on: d Current message level: 0x000000ff (255) drv probe link timer ifdown ifup rx_err tx_err Link detected: yes – I am doing an experimental test using nttcp to calculate the GOODPUT in the case that H1 and H2 at the same time send data to H3. Since the three links have the same forced capability and the amount of arrving data speed is 10 from H1+10 from H2--20M to H3 it would be expected a bottleneck effect and, due to the non reliable nature of udp, a packet loss. But this doesn't appen since the output of nttcp application shows the same number of byte sended and received. this is the output of nttcp on h3 nttcp -T -r -u 172.16.0.2 & nttcp -T -r -u 172.16.0.1 [1] 4071 Bytes Real s CPU s Real-MBit/s CPU-MBit/s Calls Real-C/s CPU-C/s l 8388608 13.74 0.05 4.8848 1398.0140 2049 149.14 42684.8 Bytes Real s CPU s Real-MBit/s CPU-MBit/s Calls Real-C/s CPU-C/s l 8388608 14.02 0.05 4.7872 1398.0140 2049 146.17 42684.8 1 8388608 13.56 0.06 4.9500 1118.4065 2051 151.28 34181.1 1 8388608 13.89 0.06 4.8310 1198.3084 2051 147.65 36623.0 – How is this possible? Am i missing something? Any help will be gratefully apprecciated, Best regards

    Read the article

  • Getting an boot error when starting computer

    - by Rob Avery IV
    I was in the middle of watching a movie on Netflix, then suddenly everything started crashing. First, explorer.exe closed down, then Google chrome. I had multiple things running in the background (Steam, Raptr, etc.). Individuality, each of those apps closed down also. When they did, a small dialog box popped up for each of them, one at a time, saying that it was missing a file, it couldn't run anymore, or something similar to that. It also had some jumbled up "code" with numbers and letters that I couldn't read. Ever since then, everytime I turn my computer on, it will run for a few seconds and give this error "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". No matter how many times I try to reboot it, it always gives me the same error. A day later after this happened I was able to start the computer, but before it booted, it told me that I didn't shut down the computer properly and asked how I wanted to run the OS (Run Windows in Safety Mode, Run Windows Normally, etc.). Once I logged, everything went SUPER slow and everything crashed almost instantly. The only thing I opened was Microsoft Security Essentials and only got in about two clicks before it was "Not Responding". Then, after that the whole computer froze and I had to restart it. Now, it's back to saying what it originally said, "Reboot and select proper boot device or insert boot media in selected boot device and press a key_". I built this PC back in February 2012. Here are the specs: OS: Windows 7 Ultimate CPU: AMD 8-core GPU: Nvidia GTX Force 560 Ti RAM: 16GB Hard Drive: Hitachi Deskstar 750GB I'm usually very good taking care of my PC. I don't download anything that's not from a trusted site or source. I don't open up any spam email or such or go to any harmful websites like porn or stream movies. I am very clean with the things I do with my PC and don't do many DIFFERENT things with it. I use it pretty often especially for video games and doing homework in Eclipse. Also, good to note that I don't have any Norton or antisoftware installed. I have Microsoft Security Essentials installed but never did a scan. Thanks!

    Read the article

  • Nagios core Event Handler not working

    - by sivashanmugam
    Nagios Event Handler is not triggering when the service is taking more time to response or down. My configuration in below nagios.cfg enable_event_handlers=1 localhost.cfg define service { use generic-service host_name Server service_description test-server servicegroups test-service check_command check-service is_volatile 0 check_period 24x7 max_check_attempts 4 normal_check_interval 2 retry_check_interval 2 contact_groups testcontacts notification_period 24x7 notification_options w,u,c,r notifications_enabled 1 event_handler_enabled 1 event_handler recheck-service } command.cfg define command{ command_name recheck-service command_line /usr/local/nagios/libexec/alert.sh $SERVICESTATE$ $SERVICESTATETYPE$ $SERVICEATTEMPT$ } alert.sh file !/bin/sh set -x case "$1" in OK) # The service just came back up, so don't do anything... ;; WARNING) # We don't really care about warning states, since the service is probably still running... ;; UNKNOWN) # We don't know what might be causing an unknown error, so don't do anything... ;; CRITICAL) Aha! The HTTP service appears to have a problem - perhaps we should restart the server... Is this a "soft" or a "hard" state? case "$2" in We're in a "soft" state, meaning that Nagios is in the middle of retrying the check before it turns into a "hard" state and contacts get notified... SOFT) # What check attempt are we on? We don't want to restart the web server on the first check, because it may just be a fluke! case "$3" in Wait until the check has been tried 3 times before restarting the web server. If the check fails on the 4th time (after we restart the web server), the state type will turn to "hard" and contacts will be notified of the problem. Hopefully this will restart the web server successfully, so the 4th check will result in a "soft" recovery. If that happens no one gets notified because we fixed the problem! 3) echo -n "Going To Ping the Virtual Machine (3rd soft critical state)..." # Call the init script to restart the HTTPD server myresult=`/usr/local/nagios/libexec/check_http xyz.com -t 100 | grep 'time'| awk '{print $10}'` echo "Your Service Is taking the following time Delay" "$myresult Seconds" |mail -s "WARNING : Service Taken More Time To Response" [email protected] ;; esac ;; # The HTTP service somehow managed to turn into a hard error without getting fixed. # It should have been restarted by the code above, but for some reason it didn't. # Let's give it one last try, shall we? # Note: Contacts have already been notified of a problem with the service at this

    Read the article

  • Triple (3) Monitors under Linux

    - by widgisoft
    I have a 3 monitor setup (each 1680x1050) via an Nvidia NVS440 (2 GPUs, 2 outputs per GPU totalling 4 outputs); this works fine under Windows XP,7 but caused considerable headaches under Linux (Ubuntu 9.04). I had previously used an XFX 9600GT and the onboard XFX 9300GS to produce the same result but the card was noisy and power hungry and I was hoping that there was some magical switch in the NVS4400 that got rid of this annoying problem - turns out the NVS440 is just 2 cards on one physical PCB :-p (I searched the net high and low for people using this card under Linux but found nothing, if anything the card uses less power and is fan less so I was to benefit from it either way) Anyway, using either set up there were 5 solutions available: Have 3 separate X instances, all un joined Have 3 separate X instances, adjoined by Xinerama Have 2 separate X instances - One using twin-view, both adjoined by Xinerama Have 2 separate X instances - One using twin-view but no Xinerama Have a single Twin-view setup and leave the 3rd screen unplugged :-p The 4rd option, using 2 separate X instances and twinview (but no xinerama) was the best balance in terms of performance and usability but caused 2 really annoying issues You couldn't control (without altering the shortcuts) which screen an application opened onto - and once it was opened you couldn't move it to another screen without opening up terminal and forcing it to move Nvidia's overriding or falsifying of Xinerama breaks and the 2 screens joined by Twin view behave like a single huge screen causing popups to open in the middle of both screens and maximising of windows stretches to the width of the first 2 screens Firefox can only run one instance as the same user so having multiple firefox windows requires at least 2 users The second option "feels" like the right option, but OpenGL is basically disabled and playing any sort of game or even running anything graphical causes a huge performance drop and instability - even trying to run a basic emulator for gba or gens just causes the system to fall over. It works just enough to stare at your desktop and do nothing but as soon as you start doing some work - opening windows, dragging things around - running multiple copies of firefox it just really feels slow. The last open, only going dual screen works perfectly and everything performs as required, full GPU acceleration - two logical screen spaces - perfect, just make it work across GPUs like windows! :-p Anyway, I know RandR was supposed to pick up the slack when it would introduced GPU objects of sorts to allow multiple GPUs to be stitched together to create one huge desktop at a much deeper layer than Xinerama. I was wondering if this has now been fixed (I noticed X server 1.7 is out) and whether anyone has got it running successfully? Again, my requirements are: One huge desktop to drag any window across Maximising of windows to each screen (as XP does) Running fullscreen apps on the primary screen and disabling the mouse from moving onto the others or on all 3 stretched Finally as a side note; I am aware of the Matrox triple (and dual) head splitter but even the price they go for on eBay is more than I can afford atm, my argument: I shouldn't have to buy extra hardware to get something to work on Linux when it's something that's existed in the windows world for a long time (can you tell I don't get on with X :-p); If I had the cash I'd have bought the latest version of this box already (the new version finally supports large resolutions as the displays I have 1680x1050 each).

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >