Search Results

Search found 7164 results on 287 pages for 'powerline networking'.

Page 89/287 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• connect server to server on secondary NIC

  - by microchasm

  Hi, I have a CentOS box with multiple NIC's running Apache. I also have another box running RHEL that will be the MySQL server. I'm trying to use the secondary NIC on the Apache box to connect directly to the MySQL server, but so far no luck. I want to isolate the MySQL box as much as possible which is why I'm going for a direct connection as opposed to running through a switch. I have a crossover cable running between them. IP configs: Apache box eth0 [to lan] ip addr: 192.168.200.100 netmask: 255.255.0.0 gateway: 192.168.111.1 eth1 [to mysql] ip addr: 192.168.200.101 netmask: 255.255.0.0 gateway: [blank] MySQL box eth0 [to apache] ip addr: 192.168.200.203 netmask: 255.255.0.0 gateway: 192.168.200.201 The rest of our network is on 192.168.111.0/24 subnet. Ping only returns Destination Host Unreachable. I've tried various variations of this setup (including straight through cable), and I can't seem to get them to talk to each other. Any help appreciated.

  Read the article

• Weird Network Behavior of Home Router

  - by Stilgar

  First of all I would like to apologize because what you are going to read will be long and confusing but I am fighting this issue for 3 days now and am out of ideas. At home I have the following setup 50Mbps Internet connects into a home router A 2 desktop computers connect to router A via standard FTP LAN cables including one where the cable is ~20m long. a second router B connects to router A via standard FTP LAN cable X (~20m long). several devices connect to the wireless network of router B and there are a couple of desktop computers connected to it through FTP LAN cables. For some reason computers connected to router B when it is connected via cable X have very slow Internet connection. It is like 5 times slower than what is expected. This is the actual problem I am trying to solve. Interesting facts If a computer is connected to cable X directly instead of through router B the Internet speed is just fine (up to the 50Mbps I get from the ISP). Tested with two computers. I have tried replacing router B with another router C and the problem persists. If I connect router B via another cable to the same ports with the same settings everything seems to work fine and computers connected to router B have quite fast Internet I have tested mainly via Speedtest.net but I have also achieved similar speeds when downloading a file The upload speed is quite higher than the download speed in all cases. Note that my ISP usually has higher upload speed (unless it manages to hit the 50Mbps cap) It seems like the speed when connecting through router B with cable X is reduced 4-5 times no matter what the original speed is. For example via router B I get 10Mbps speed to local servers where I get 50Mbps when connected on router A. If I use a distant server where the ISP is only able to provide 25Mbps I get 4-5Mbps on router B. WiFi is slower than LAN on both routers (which is normal) but the reduced speed is reduced proportionally for WiFi. In addition the upload speed is normally higher from the ISP and it is also reduced proportionally. I have tried two different network configurations. One where I have NAT behind NAT where router B connects to router A via the WAN port and has its own DHCP. Second where router B connects to router A via standard LAN port and has DHCP disabled. In this configuration router B serves as a switch and the Network Gateway for computers connected to router B is the internal IP address of router A. Both configurations work just fine but both manifest the reduced speed issue. pings seem to work just fine As far as I can tell none of the cables is crossed The RJ45 setup for cable X orange orange-white brown brow-white blue blue-white green green-white This is a big problem for me since cable X passes through walls and floors and is very hard to replace. I also may have gotten some of the facts wrong because I am almost going crazy with this issue and testing includes going several floors up and down the staircase. One hypothesis I came up with is that the cable is defective in such a way that the voltage from the router affects its performance. When it is connected to a computer it performs just fine but the router has less power. Related hypothesis includes the cable being affected by electricity cables in the walls when the voltage is low. (I know nothing about electricity) So any ideas what to do, what to test or what the issue may be?

  Read the article

• Cisco VPN disconnects after 5 seconds with error 422

  - by Marius

  I'm trying to connect to my university's server with VPN using Cisco VPN Client version 5.0.04, but after 5 seconds it disconnects with the error message 422: Lost contact with the secure gateway. Check your connection. From my research on the net it seems this could be because it tries to find my IP, and finds out that this is 127.0.0.1. Then 5 seconds later it discovers that I have a new IP (my actual IP), and it disconnects because I'm not allowed to change IP. Does anyone know how I could fix this, or if there is another reason i get this error? Update I looked through the log, and found this error, which confirms what I thought, except it gets the correct IP first, then changes it to localhost. 87 18:56:53.250 08/24/09 Sev=Warning/3 CM/0xA3100027 Adapter address changed from 149.171.237.25. Current address(es): 127.0.0.1.

  Read the article

• vista wireless adapter not working

  - by Sam Adams

  After this script gets called http://blogs.technet.com/b/heyscriptingguy/archive/2008/09/29/how-can-i-enable-or-disable-my-network-adapter.aspx 50 times over a 12 hour span, disabling wireless/enabling wired, followed by enabling wireless/disabling wired, the wireless adapter stops finding connections entirely, even if it is enabled, needing a reboot. vista, powershell 1.0 (for some reason vista is not accepting powershell 2 for an update), 32 bit, intel R pro /wireless 3945ABG adapter. Any reasons why, thanks.

  Read the article

• esxi VM will not connect to virual switch

  - by NitroxDM

  I have a exsi box with a VM (Windows 2003) that will not connect to any of the switches. The switch shows the VM connected but I can not ping anything on the network. I have double checked the VM's IP. No dice. There are a ton of messages in the log: [DATE 'VmMisc' NNNNN warning] Failed to validate VM IP address: unknown Update: There are 3 other VMs. Each vSwitch has 56 ports. I can ping from one nic to the other. Each vSwitch shows that the new VM is connect. VMware ESX Server 3i V 3.5.9 Build 123629 Update 2: Out of the blue it just started working. I didn't change anything. I think it has something to do with RRAS.

  Read the article

• Kickstarting VMWare ESX 4.1 (Error: No NIC with name bootif)

  - by William

  I'm having an issue kickstarting an installation of VMWaare ESX Classic 4.1. I've stripped down my kickstart a bit to just: accepteula keyboard us auth clearpart --firstdisk --overwritevmfs url --url=10.16.0.1/cblr/ks_mirror/esx-classic-4.1.0-260247 rootpw --iscrypted $1$zZJa3g7g$mD8d.6QgbPku1QovQTAps/ timezone 'US/Pacific' network --addvmportgroup=true --device=vmnic0 --bootproto=dhcp part '/boot' --fstype=ext3 --size=1100 --onfirstdisk part 'none' --fstype=vmkcore --size=110 --onfirstdisk part 'datastore1' --fstype=vmfs3 --size=8920 --grow --onfirstdisk virtualdisk 'esxconsole' --size=7920 --onvmfs='datastore1' part 'swap' --fstype=swap --size=916 --onvirtualdisk='esxconsole' part '/var/log' --fstype=ext3 --size=2000 --onvirtualdisk='esxconsole' part '/' --fstype=ext3 --size=5000 --grow --onvirtualdisk='esxconsole' %post --interpreter=bash However, when I attempt to use this kickstart during a PXE install with no additional kernel options, I get the following error: There was a problem with the Network Device specified on the command line. Error: No NIC found with name bootif If I comment out the network line in the kickstart, the error changes to: There was a problem with the Network Device specified on the command line. Error: No NIC found with name eth0 How can I fix this? Thanks.

  Read the article

• Why does the file date always change to the current date?

  - by Marshall

  We are a programming shop, but this i snot a programming question. My boss has put an external HD on the network. It contains the 'home' folders for users on the network. He uses it to place VB projects that he wants me to work on. But no matter what date and time he places a project on the drive, the file dates(modified) always shows the current date, though nothing in the files have changed. It makes it very hard to confirm that he has given me the latest versions. (He is not a fan of version control and nothing I do will convince him different.) Any ideas why this happens and how to prevent it from happening? P.S. As I wrote this I decided to add the last accessed date to the file display, and those dates happen to show the dates I expect to see. Why is the modified date getting changed, but not the accessed date. Does the accessed date change only when the files are opened or read, changed or not? Note: I use Directory Opus 9, a replacement for windows file browser. Thanks, Marshall

  Read the article

• ESET Remote Administrator Console showing infected files on a client, but threat log is empty

  - by Aron Rotteveel

  We recently deployed ESET NOD32 Antivirus on our small domain network and use the Remote Adminstrator to manage everything remotely. On a recent full system scan, one of the clients shows 10 infected files of which 4 have been cleaned in the scan log. The strange thing, however, is that the threat log is empty. Is there any reason why the threat log is empty? What has happened to the 6 remaining uncleaned files? Where can I view information on what files are infected and what they have been infected with? I know this can be done through the scan log properties screen, but with 958790 files scanned, I obviously do not want to browse through this list. Any help is appreciated.

  Read the article

• Vista machine hardwired cannot see xp laptop on wireless

  - by Kahega

  I have a laptop with windows xp, connected to my wireless router. I am trying to view the shared files on the laptop with my vista desktop computer. The desktop computer is hardwired to the same router. I can see the desktop pc fine on the xp laptop, and view the shared folders. I cannot see the xp laptop when on the desktop pc. I have tried installing the link update for xp, that is not the issue. I have also tried turning off firewalls, no dice. I have scoured google for this issue, and do not see any resolutions. Any suggestions would be appreciated.

  Read the article

• How can I track down what part of pfsense is blocking website access?

  - by Chase Florell

  I've got a PFSense firewall/gateway on our network. Everything works great except for the fact that I cannot access one specific website. Pfsense is running the following packages Country Block LightSquid nmap notes squid squidGuard Strikeback I can access every single website I've ever tried aside from one that we need for business use (http://bridalnetwork.ca) here's the traceroute frodo:~ chase$ traceroute bridalnetwork.ca traceroute to bridalnetwork.ca (192.197.103.73), 64 hops max, 52 byte packets 1 rohan (192.168.5.1) 6.618 ms 1.662 ms 9.207 ms 2 * * * 3 * * rohan (192.168.5.1) 7.225 ms !H 4 rohan (192.168.5.1) 5.314 ms !H 5.701 ms !H 7.573 ms !H frodo:~ chase$ How can I figure out what the reason behind the blockage is? note: this has been tested on every computer on the network with the same results. ps: the pfsense box is 'rohan' (192.168.5.1) Here's what I get with Squid enabled and here's what I get with Squid disabled

  Read the article

• Ping "replies" from same computer with 'Destination host unreachable' (no route to other computer)

  - by Srekel

  I've got two computers in a LAN behind a wireless router. One has XP with ip 192.168.1.2 This one has W7 with ip 192.168.1.7 If I try to ping the other one from this computer, I get this: C:\Users\Srekel>ping 192.168.1.2 Pinging 192.168.1.2 with 32 bytes of data: Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Reply from 192.168.1.7: Destination host unreachable. Ping statistics for 192.168.1.2: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Tracert gives the same result: C:\Users\Srekel>tracert 192.168.1.2 Tracing route to 192.168.1.2 over a maximum of 30 hops 1 Kakburken4 [192.168.1.7] reports: Destination host unreachable. Trace complete. Although I can ping and tracert the router without any problems. I have disabled the firewalls on both computers. The router is set to use DHCP (if that matters). Here is the output from "route". C:\Users\Srekel>route print =========================================================================== Interface List 13...00 25 86 df c6 89 ......TP-LINK Wireless N Adapter 12...e0 cb 4e 26 b9 84 ......Realtek PCIe GBE Family Controller #2 11...e0 cb 4e 26 be 94 ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 14...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.7 20 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 192.168.1.0 255.255.255.0 On-link 192.168.1.7 276 192.168.1.7 255.255.255.255 On-link 192.168.1.7 276 192.168.1.255 255.255.255.255 On-link 192.168.1.7 276 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 192.168.1.7 276 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 192.168.1.7 276 =========================================================================== Persistent Routes: None IPv6 Route Table =========================================================================== Active Routes: If Metric Network Destination Gateway 14 58 ::/0 On-link 1 306 ::1/128 On-link 14 58 2001::/32 On-link 14 306 2001:0:5ef5:73ba:881:20c1:3f57:fef8/128 On-link 14 306 fe80::/64 On-link 14 306 fe80::881:20c1:3f57:fef8/128 On-link 1 306 ff00::/8 On-link 14 306 ff00::/8 On-link =========================================================================== Persistent Routes: None I've set up and debugged a few networks in my life but I'm not really an advanced network user, so I'm not sure what might be wrong. Any ideas? Oh, and pinging this computer from the other computer doesn't work either. EDIT: Adding arp output: C:\Users\Srekel>arp -a Interface: 192.168.1.7 --- 0xd Internet Address Physical Address Type 192.168.1.1 00-1f-33-ef-28-01 dynamic 192.168.1.255 ff-ff-ff-ff-ff-ff static 224.0.0.22 01-00-5e-00-00-16 static 224.0.0.252 01-00-5e-00-00-fc static 239.255.255.250 01-00-5e-7f-ff-fa static 255.255.255.255 ff-ff-ff-ff-ff-ff static Adding ipconfig... C:\Users\Srekel>ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : Kakburken4 Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : TP-LINK Wireless N Adapter Physical Address. . . . . . . . . : 00-25-86-DF-C6-89 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.7(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 09 April 2010 23:09:45 Lease Expires . . . . . . . . . . : 10 April 2010 23:09:45 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Ethernet adapter Local Area Connection 2: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller #2 Physical Address. . . . . . . . . : E0-CB-4E-26-B9-84 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Ethernet adapter Local Area Connection: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Realtek PCIe GBE Family Controller Physical Address. . . . . . . . . : E0-CB-4E-26-BE-94 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes Tunnel adapter isatap.{74D5C406-894E-4000-8DE7-6AAEBF7C8382}: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Microsoft ISATAP Adapter #2 Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : 2001:0:5ef5:73ba:881:20c1:3f57:fef8(Preferred) Link-local IPv6 Address . . . . . : fe80::881:20c1:3f57:fef8%14(Preferred) Default Gateway . . . . . . . . . : :: NetBIOS over Tcpip. . . . . . . . : Disabled

  Read the article

• Windows Server 2008 R2, weird intermittent outgoing connection issues, & Hyper-V Virtual Network

  - by brizz

  My provider says that they run an 'unfiltered' network, so it's not a network issue. Not entirely convinced...but they aren't being very helpful. Basically two days ago started having issues with DNS completely stop working for anywhere between 2-20minutes. This happens roughly every 1-2 hours at least once. I later then found that I am unable to ping ANY external IP address when this is going on. So it's not a DNS issue. Whats even more odd is when this is going on, I STAY connected via RDP, and I can access webpages, etc that are on the server when I access from my home computer. Have tried disabling the firewall--no fix. Have checked Event viewer, the only thing that is there is a warning that DNS has stopped working. I have made no changes/updates to the server. The only thing I have done is add an IP address (don't think it has anything to do with the problem, but wanted to mention everything). Any help/insight/suggestions on how to go about debugging would be much appreciated! update: I am also running Hyper-V, and a virtual network. I just tried pinging (when I have issues), from a Hyper-V machine--and it works, when the main server doesn't.

  Read the article

• Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

  - by dgwilson

  We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

  Read the article

• Windows 7 DHCP Default Gateway not Overridden by manual Default Gateway

  - by dgwilson

  We have recently installed Windows 7 for student computers. All student computers must be routed through our content filter which is located at 192.168.0.63. This was done in WinXP by adding a Default Gateway in the network adapter settings TCP/IP Properties Advanced Default Gateway. All teacher computers are routed through the DHCP assigned Default Gateway of 192.168.0.1. In WinXP the dhcp default gateway was correctly overridden by this manual setting. In Win7 it appears that the dhcp default gateway is retained and the manual one is added to the list so that there are two with the dhcp one having the primary metric. I have tried several ways to remove the dhcp default gateway such as, running the "route delete 0.0.0.0 192.168.0.1" command. Doing this from an administrator command prompt works but it just resets upon reboot. I've tried adding this command to the registry's Run section but it seems to run as a non-administrator and therefore will not complete successfully. Is there any way to prevent this and force the manual default gateway to override the dhcp one? Or to remove the dhcp assigned one automatically on boot/login? HELP! We CANNOT allow student computers to connect to the internet without going through the content filter.

  Read the article

• How to use my PCs internet connection for my mobile phone?

  - by iamrohitbanga

  i don't want to take a GPRS connection and want to use my PC's internet connection to access internet on my mobile phone. is it possible? i have samsung sgh e251.

  Read the article

• What is Allow multicast from Broadband Network?

  - by PeanutsMonkey

  If a wireless modem router has the option Allow multicast from Broadband Network, what does this mean exactly? What risks are there to leaving it enabled and why would you have it enabled? I understand that a broadcast is sending a packet to every device on the network and a multicast is send a packet to a specified set of addresses. A multicast packet can cross routers whereas a broadcast cannot although I don't quite understand how these "set of addresses are specified"

  Read the article

• Snap Server 18000 connection help!

  - by sicko666

  I wonder if anyone here can help me. I have a home server setup made up of old secondhand computers, 2 servers running Windows Server 2003, 1 workstation running Windows 7, a 16 port switch & an adsl ethernet modem. All these connect and talk to each other fine but then I got a "Snap Server 18000" and a "Snap disk 30sa" sata array. When I turn the Snap on, it boots past the BIOS, runs a kernel, then displays: This device cannot be managed via the video/kbd/mouse interface. The video is now disabled. You may access the management functions from your web browser. Only, none of the other PCs detect it, so no browser can find it! I have checked all cables, and all LEDs indicate there's a connection. I have installed the windows "iscsi" and the adaptec "Snap Server Manager" on all PCs but still it's not detected. I don't know what else to do, please advise!

  Read the article

• Block P2P traffic on a Linksys router WRT54G with tomato firmware

  - by Kami

  Hi, I'm running a small wireless network (6 to 10 users) on a Lynksys WRT54G with tomato firmware sharing an internet connection. I don't want the users to download files with bittorrent (mainly used) and other p2p apps. I've also found some solutions about lowering p2p traffic priority using QoS. I really need to BAN p2p traffic. Does anyone know how to setup some rules to deny that kind of traffic ? I've tried to setup an Access Restriction Rule: But it's not working at all ...

  Read the article

• Multicast doesn't seem to be working on RHEL 5.5

  - by NullUser

  I'm trying to install Oracle Grid Infrastructure on two machines. Their documentation states You must enable multicasting for the cluster on the IP address subnet ranges 224.0.0.0/24 and 230.0.1.0/24 So I ran: route add -net 224.0.0.0/24 dev eth2 route add -net 230.0.1.0/24 dev eth2 route -n produces: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 230.0.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 224.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 # and others An ifconfig eth2 shows, among other things, UP BROADCAST RUNNING MULTICAST. However, when I run their multicast test utility, it fails me: Test for Multicast address 230.0.1.0 Sep 3 19:40:39 | Multicast Failed for eth2 using address 230.0.1.0:42000 Test for Multicast address 224.0.0.251 Sep 3 19:41:10 | Multicast Failed for eth2 using address 224.0.0.251:42001 What am I doing wrong?

  Read the article

• Wireless not working on ubuntu 12.04

  - by Yosef

  I just install ubuntu 12.04 but wirelless not works(windows 7 wirelless works). I open my windows 7 and see under Network Adapters: Edimax 802.11n Wireless Adapter Realtek PCIe GBE Family Controller Which drivers i should download to install them on ubuntu 12.04 to make wireless work? And how i install this drivers on ubuntu after i copy them to usb. (I can have only wireless connection not wire - soo i nhave to dowload the drivers with windows then copy them to ubuntu) Thanks

  Read the article

• Comparison of Firewall, Intrusion Prevention, Detection and Antivirus Technologies in Organizational

  - by Berkay

  in these days i'm reading about intrusion prevention/detection systems.When reading i really confused in some points. First, the firewall and antivirus technologies are known terms for years, however now IDS becomes popular. My question includes: in organizational network architectures when/where do we use these systems ? What are the benefits of using each ? Does Firewall contains all these others? If you give me some examples, it will help much. Thanks.

  Read the article

• How do i use a USB wifi device properly?

  - by acidzombie24

  I'll just say a few random things One usb wifi device i notice only worked when it plugged into my usb hub Another one worked but couldnt get full speed. It came with an extention cord and when i had it a few feet away i was able to (usually) get full speed I had a wifi card in a tower in the past and just about all laptops have it built in How do i use a USB wifi adapter properly? The first device didnt come with an extention cord and made no mention of bringing it away from the computer. When someone else tested the device he said he was getting full speed while it was plugged into his tower so i was pretty surpised. How do i use USB wifi devices properly?

  Read the article

• What's the difference between a wifi access point and station?

  - by Earlz

  I noticed that my (rooted) modem has some hidden modes for wifi. It has the default(and only setting without rooting) wireless access point, but it also has the settings repeater, ad-hoc, and station. What I'm really curious about is this station mode and how it differs from access point. I did a cursory search and didn't come up with any significant differences, other than that they are two distinct modes on many wireless chipsets. What is this station mode and how does it differ from access point?

  Read the article

• maemo - n900 - SIP call quality

  - by Walter White

  Hi all, I have been using SIP / VoIP on my n900 to make calls and my problem is after about 15 minutes of talk time, more recently 18 minutes exactly, my connection dies and I can no longer hear them or them me. I have tested this with various VoIP providers to confirm that it is not specific to any one provider, but instead my phone. I also have tested this on my laptop. I sent my phone to be tested at some place that tests hardware and no problems were found with the hardware. What can I do to rectify the 15 minute call barrier with SIP on my phone? The other problem I have too is that for the wireless broadband to start working again, I need to restart the phone, it appears the network driver gets overloaded. The one thing that appears to work fine is making cellular calls. I have yet to have call quality drop off after 15 minutes over a cellular connection. Thanks, Walter

  Read the article

• tcpdump selective acknowledgements question

  - by wlaus

  Hi All, I eventually sometimes watch most initial tcp connection attempts like this: tcpdump -nn -Z somepcapuser not src host (12x.x5.109.xxx or 62.75.160.xxx ) and not (port 9001 or 443 or 8080 ) and tcp[tcpflags]&(tcp-syn) !=0 and not tcp[tcpflags]& (tcp-ack) !=0 or icmp this works pretty well to quickly identify oddness so far. However, I now have a question on the following output: 03:53:52.227884 IP 203.81.166.20.53786 62.75.160.xxx.80: S 846930886:846930886(0) win 61690 "<"mss 1460,nop,nop,sackOK,opt-178:f04700000000,nop,wscale 4"" I wonder what the marked portion means, haven't seen that before. Thanks for help wlaus

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >