Search Results

Search found 20418 results on 817 pages for 'social network'.

Page 89/817 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

• Dial-in VPN Routing issue when on 192.168.x.x network range

  - by Ian

  I'm not an expert on networks but have a small office on the 192.168.x.x. range which is managed by a vigor (2800) router. I have enabled the VPN dial-in option on the router so I can get to the server on 192.168.1.100 which works fine from my macbook when i'm NOT on a local network with that is on the 192.168.x.x range. e.g. works fine when I tether over my Android smartphone but when I try & connect when on my home network, it connects, I can access the router (192.168.1.1) but cannot access 192.168.1.100 - traceroute doesn't hop via 192.168.1.1 I have enabled "send all traffic over VPN connection but again, not joy... Feels like the osx platform isn't routing the traffic out to the vpn endpoint as the destination address is on the local subnet but expect it would be. This work fine on a windows PC on the same home network. Any thoughts on what the issue could be?

  Read the article

• Wordpress network admin pointing to root as opposed to subdirectory

  - by Ian

  I've installed Wordpress on my nginx server in /blogs and new networks will be in /blogs/blogname. All my main site links point to example.com/blogs, but when I go to network admin the links point to http://www.example.com/wp-admin/network/ instead of http://www.example.com/blogs/wp-admin/network/ Here's the multisite section in my config: define('MULTISITE', true); define('SUBDOMAIN_INSTALL', false); $base = '/blogs'; define('DOMAIN_CURRENT_SITE', 'www.example.com'); define('PATH_CURRENT_SITE', '/'); define('SITE_ID_CURRENT_SITE', 1); define('BLOG_ID_CURRENT_SITE', 1); If I try changing PATH_CURRENT_SITE to /blogs, I get a db connection error. Thanks.

  Read the article

• Choosing a home network layout

  - by James M.

  I have a server, 4 PC's, a network printer, a switch and an ADSL modem. Currently the server runs Red Hat 9 and sits between the internet and the other PCs like in http://upload.wikimedia.org/wikipedia/en/1/12/Sample-network-diagram.png I have bought a new server PC to replace the old one, and I plan to install Fedora Core linux on it. The server acts as web and file server. The PCs all run Windows. Alternatively, I could connect the new server and all PCs to the switch, and connect the switch to the modem. (Sorry, couldn't find an image.) What are the pros and cons of these network layouts? Eg. in terms of reliability, security and flexibility? I am not a Linux guru but know of (and am not afraid of) iptables, dhcpd et al. Thank you for any tips, pointers and links.

  Read the article

• How to have 2 windows machines on the same network with the same IP address

  - by Stu

  I have a custom made ADC device that is spitting out data by addressed UDP packets. I have that device plugged into a 4 port switch. I have one windows embedded standard 7 machine which is the normal recipient of that data. To be able to receive the data (Using LabVIEW) the windows network adapter IPv4 settings must have a static IP address that corresponds to the UDP packet destination. I would like to add a second windows machine (This one is just regular Win 7 Pro) to simultaneously catch the data, however with all devices connected to the switch, the Win 7 Pro machine recognizes an IP address conflict and will not take the setting for the required static IP address. (The network adaptor settings show that the correct value has been entered but ipconfig shows that it is not actually set.) Neither windows machine needs to transmit network data, they only need to be able to receive the UDP data from the ADC device. Is there any way to disable this IP address conflict detection 'feature' of windows networking?

  Read the article

• Exim: Change sender address when sending mails out of local network

  - by Esa Varemo

  We have a working exim setup at a site, where users can send and receive mails. We are trying to setup a server to send some warnings and errors using email to an address that is outside the local network. The problem is: The program that sends the mails sends them using the username it runs under and the local hostname of the server. This cause the mails to have a sender of format: [email protected]. Exim sends these mails to the ISP's SMTP server, which rejects the mails as they have an illegal or unverifiable sender (the internal address). I'm thinking I should configure exim to rewrite the sender when: - sender's domain is on the local network - receiver's domain is outside the local network I tried setting some kind of rewriting in the exim config, but did not manage to get it to work. I'd show what I have tried, but I ran out of time on the last visit to the site, and had to revert to the original version losing all the changes I tried.

  Read the article

• Finding spoofed IP address on network

  - by Jared

  I have a few IP spoof dropped messages coming out of my Sonicwall firewall, we'll call them Source A and Source B. Both of these sources have the same mac address indicating they're coming from the layer 3 switch behind my firewall. Source A has an ip within a valid subnet on my network and it shows up in the ARP table of my layer 3 switch. I was able to trace the exact location and fix the issue. Source B's ip however, is not within valid subnet on my network and it's not showing up in my layer 3 switches arp table. Any idea how I can trace the location of this device within my network? Thanks in advance.

  Read the article

• Access my router's gateway network?

  - by Danpe

  I have 2 routers in my place. Main Router (Connected to the Internet) - 192.168.1.1 Secondery Router (Connected to the Main Router) - 192.168.0.1 I have a Network Storage Device and few Shared Directorys connected to the Main Router. (Network Storage - 192.168.1.16) How can i acces one of them using a PC connected to the Secondery Router? Home Network Diagram: I currently have access to the internet using both laptop and Main PC. But i want to get access from my laptop to the Storage and to ym shared directorys. The problem is the my Main router always forwards all packets stright to the WAN.. (Internet)

  Read the article

• Vista to Vista network visability issue

  - by Sk93

  Hi All, I've got a Vista Business PC and a Vista Business Laptop connected via a virgin media router (Netgear CG2100D) and I cannot get the two machines to see each other correctly over the network. The laptop is connected via wireless, whilst the pc is wired. Both are set to recieve their network settings automatically (DHCP) and both have the windows firewall (the only firewall on either) turned off completely. I can ping each machine fine from one another using the ip addresses, and I can also connect via \. However, connections via \ fail, and I cannot see the machines in the network map. I have tried turning netBIOS to be "always on" on both adapters, but this makes no difference. I've been messing around pretty much for 6 hours now and am getting quite fustrated by this! (my original aim was to get media sharing working, but I've pretty much abandoned that for now). Any ideas?

  Read the article

• Can I create a virtual network interface to connect to a real network device?

  - by michelemarcon

  I have a networked windows pc with 2 network interfaces. The first connects to a lan with ip address 10.1.. The second connects to another lan with ip address 10.2.. Maybe it's a dumb question, however is it possible to virtualize the second network interface, so that the pc can connect to the 2 lans? If necessary, I may switch to linux or paravirtualization. CLARIFICATION: I want to send DHCP broadcast packets on the second lan, but not on the first lan. I want to do it with one single physical network interface. At the moment, I'm not using any virtualization software.

  Read the article

• Setting up Mac VPN on simple network with separate IPs

  - by Dave

  Hi there, We have a pretty simple network configuration. A typical ASDL line with two extra IP addresses. We have a basic home network router Dlink DIR-655. We have two Mac OS X Snow Leopard Servers that we want to setup VPN on. The problem is that we can't change the ports which VPN works under ie. we can only setup port forwarding for UDP 500,1701,4500 to a single server. I'm wondering how we can cost effectively re-work our network so that we can take advantage of the separate IP addresses and have both VPNs working with the same router. Is that possible with our current hardware setup or do we need something more powerful? We're also toying with Mobile Access and wondering if that might be easier to setup. Expert help is greatly appreciated.

  Read the article

• Several border firewalls in the same network

  - by nimai

  I'm currently analyzing the consequences of multipath connections for the firewalls. In that context, I'm wondering if it's really uncommon to have several firewalls at the borders of a network to protect it. The typical case I'd imagine would be a multihomed network, for which the administrator would have different policies for links from different (or not) ISPs. Or maybe even in an ISP's network. What would be the practical (dis)advantages of such a configuration? Could you provide an example of an existing topology using several border firewalls?

  Read the article

• refresh windows network performance counters in command line

  - by michalv82

  I am testing a USB device connected to a windows PC. When the device is connected then windows has another network interface going through the device. I need to get the bytes transffered for that specific interface, basically I need the data shown in the networking tab in the task manager for my interface adapter. I found this question which helped to get this info: ms windows network activity bytes send and receive in command line However I have a problem when I run multiple tests - each time I disconnect and connect the device there's another line for the interface, like below. In the task manager networking tab I only see one record for my interface but I don't know how I can know from command line which is the lastest and current instance (it's not like the first line or last line is always the current interface, I noticed it's not consistent): wmic path Win32_PerfRawData_Tcpip_NetworkInterface Get Name,PacketsReceivedPerSec,PacketsSentPerSec,BytesReceivedPersec,BytesSentPersec BytesReceivedPersec BytesSentPersec Name PacketsReceivedPersec PacketsSentPersec 422666370 6317989292 Intel[R] 82579LM Gigabit Network Connection 2715169 8109643 49150 375973 My USB Device 432 568 0 0 My USB Device _2 0 0 0 0 My USB Device _3 0 0 0 0 My USB Device _6 0 0 0 0 Local Area Connection* 9 0 0

  Read the article

• Network router and switch configuration

  - by gilly3

  Can I put a switch before my router in my home network? Here is a diagram of how I want to set up my network: ________________________________ ________________________________________ | | | | | Cable Access Panel | | Home Office | | _____________ ________ | | _____________ | | | | | | | | | | _________ | | | Cable Modem |--->| Switch |-------------->| Router |____| | | | |_____________| |________| | | |_____________| | Printer | | |______________________/____\____| | / | \ |_________| | ___/_ _\___ | _____/ ____|____ \_____ | | | | | | | | | | | | | | PC1 | | PC2 | | | PC3 | | Ext. HD | | PC4 | | |_____| |_____| | |_____| |_________| |_____| | |________________________________________| The reason I want to do this is because my router is also my wireless access point. My cable modem is located in the far corner of my home where my phone/tv/network access panel is. I'd rather keep the wireless access point in a more central location, but I'm not sure if DHCP will continue to work properly with that configuration. Edit: I'd like to continue to be able to share files and access my networked drive and printer from each computer in the house.

  Read the article

• Establish direct cable connection between Windows 8 PCs in home network

  - by Marie. P.

  I'm running two PCs, a desktop and a laptop with Windows 8 Release Preview ("Build 8400"). They are connected to the same router in infrastructure mode, thereby having wireless internet. Due to often file synchronization between the machines I want to establish a cable connection that allows direct file transfer, without needing to use the wireless. When I plug in the cable (normal, not cross-over), I see in "Control Panel\Network and Internet\Network Connections": "Ethernet - unidentified Network" on both PCs. Transferring a file between both still only uses the WiFi via the Router. I noticed that when turning off the wifi on one PC, I can set up a shared internet connection that will work via Ethernet-cable, but since sometimes only one PC runs, sometimes the other one, I do not want to have the internet of one machine to be dependent on the other one being switched on. I do not have a crossover-cable, but since I did connect the PCs already successfully (just without both being on the internet), I'm sure that this should also work with a normal ethernet cable.

  Read the article

• Wireshark Not Displaying Packets From Other Network Devices, Even in Promisc Mode

  - by eb80

  System Setup: 1. MacBook running Mountain Lion. 2. Wireshark installed and capturing packets (I have "capture all in promiscuous mode" checked) 3. I filter out all packets with my source and destination IP using the following filter ("ip.dst != 192.168.1.104 && ip.src != 192.168.1.104") 4. On the same network as the MacBook, I use an Android device (connecting via WiFi) to make HTTP requests. Expected Results: 1. Wireshark running on the MacBook sees the HTTP request from the Android device. Actual Results: 1. I only see SSDP broadcasts from 192.168.1.1 Question: What do I need to do so that Wireshark, like Firesheep, can see and use the packets (particularly HTTP) from other network devices on the same network?

  Read the article

• Tunneling over IPv4 network

  - by JoesyXHN

  Hi, Most of the articles I have read about Tunneling. It describes that the tunneling supports for communication between 2 IPv6 networks over (crossing) an Ipv4 network. For example: TUNNEL A (IPv6) ==> INTERNET NETWORK (IPv4) => TUNNEL B (IPv6) Would it be doable for: TUNNEL A (IPv4) ==> INTERNET NETWORK (IPv6) => TUNNEL B (IPv4) Please give me an answer with elaborate explanation. Thanks in advance.

  Read the article

• Accessing VMware Player across the network

  - by Tiffany Walker

  My network: 192.168.2.2 (computer) 255.255.255.0 (mask) 192.168.2.254 (gateway) The VMplayer is: 192.168.233.129 (ip) 255.255.255.0 (mask) 192.168.233.255(bcast) It's obvious the player can't be access from other systems because of the wrong network settings. However, I am not sure as to how to change that. Obviously I have to edit the ifcg-eth0 but I know I also need to edit it on the host system to make it accessably. Is this done from inside VMware Player? Or do I need to edit the network devices? The host box is Windows. Inside VMware is Linux.

  Read the article

• VM's, virtual networks and my home network.

  - by Jason Taylor

  I want to create a small lab of VM's to test out networking with. I have two PC's running VMWare and I need the VM's on these two PC's to be connected to their own LAN. I am planning on bridging the VM's into my home network. My home network and PC's are in the 192.168.0.0 range, but I want my VM's to be in 10.1.0.0. If I do it this way (Bridging the VM's on both hosts into the network) will the VM's be able to communicate? Will my home router freak out seeing two different subnets? Is there another, easier way to connect the virtual lan's on two vmware workstations together?

  Read the article

• Oracle 11g network configuration

  - by Kylo

  Hi, I installed Oracle 11g Enterprise Edition on my Windows 7 Pro. My problem is that I cannot log into database from other host (local network). When I connect to database using Oracle SQLdeveloper everything is ok as long as I specify 'localhost' in connection configuration. However, when I change it to '192.168.0.190' which is my host IP address I get 'The Network Adapter could not establish the connection'. I get the same error when logging in from other host in local network. What is the problem?

  Read the article

• Block complete network access for one local user

  - by tumchaaditya

  Well, this is quite trivial question but I could not find a satisfactory answer even after trying many search queries both here and on Google. I want to share my PC with my room-mate. And I don't want him to access ANY network(LAN included). So, I can create an account for him and block network access for the same. I would prefer avoiding any third-party tools as far as possible. It's a simple home PC hooked up to a router for internet. No domain and other stuff. (Technically, guest account can achieve this. But somehow, the guest account on my PC has network access!)

  Read the article

• I can't use a custom theme on a network account

  - by Rev

  I'm an administrator for the computer I use, but I'm using a network account. I can set custom themes (non-Microsoft, I mean) on my local account but not on the network account. It's the same machine, just different accounts/domains. I tried to repatch the files from the network account, but it says they're already patched. Any ideas why this won't work? The themes don't show up in the Personalize menu, and I can't just double click the .theme file from the Themes folder in Windows 7 Pro. This is the theme I'm trying to use, by the way: http://fediafedia.deviantart.com/art/Windows-8-VS-for-Win7-258514188?q=boost%3Apopular%20windows%208%20theme&qo=0 Tried repatching the files, still nothing.

  Read the article

• Network Share unavailable after DNS Change

  - by Justin Largey

  Hi, I have a server, called Server1 with various network shares on it. Our users map to this share using \\Server1\FileShareName1. During a DR Test, we rerouted all network traffic from Server1 to Server21. All folder shares are set up on Server21. We were hoping the the network shares would still be accessible using \\Server1\FileNameShare1, unfortunately, they are not. Does anyone know why this is happening? This is a Win2003 Environment, and DNS was flushed. I confirmed that IP addresses are matching between the two servers. Any help or insight is much appreciated.

  Read the article

• Automate Win8 network and sharing settings

  - by RafaelBarriola

  I am trying to create a unattended DVD installation of Windows 8, but I can't seem to find a solution do this. What I'm looking for are to have the same settings on the Network and Sharing Center, to have the Turn on network discovery "on" for both the private and guest/public within the Control Panel. For private and guest/public, I need to: Turn on network discovery Turn on printer and file sharing Turn off public folder sharing Turn on password protected sharing Use user accounts and passwords to connect to other computers I've been searching for days and have not found a solution yet.

  Read the article

• Connect to server in VMWare player while host is not connected to a network

  - by blockcipher

  Hello, I have a linux server VM on my host machine using VMWare player and if I'm on a network, I can connect to the web server on the VM via a web browser. However, I tried to do the same while I was disconnected from a network and I couldn't. The networking is set to Host-only and I did use dhclient/ifconfig to make sure that yes, I did have an IP address assigned to the VM. While I can work around this, the purpose of the VM is to allow us to demo our app from any machine and that machine may not be connected to a network. Thanks.

  Read the article

• Connecting via url to a server that is on the same network as me

  - by Axehead

  Good day, I'm having problems with the ftp server I've just set up. I've already managed to configure my modem and wireless router to open up port 21 and setup ftp in my server. But It seems that when I try to connect to it when I'm in the same network as the server via URL, (ftp://mydomain.com) it redirects me to the modem's web interface. But then when I try to connect to it outside the network using a different internet connection. It succeeds. It also succeeds when I'm in the same network and I go to ftp://192.168.., the server's local IP. Am I supposed to adjust something in the modem or router? Or is this a different problem altogether? BTW I'm using Windows Server 2008 r2 as my server's OS and using IIS for ftp.

  Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >