Search Results

Search found 20418 results on 817 pages for 'social network'.

Page 86/817 | < Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >

  • Why the VPN Network Shake-Up?

    - by Brent Arias
    I can RDP to another machine on my home network, only if I'm not also hooked up to my employer's VPN with the Cisco VPN client. Indeed, I can't even ping the other machine by name in this mode, because ICMP suddenly thinks that ( ping myMachine ) now means ( ping myMachine.myEmployer.com ). Of course there is no machine by that latter name, and so it fails. Even weirder, once I disconnect from the VPN I can again ping myMachine successfully, but ICMP reports the machine by its MAC address instead of its IP address. I don't think I've ever seen ping identify another machine by its MAC address. So two questions: How can I access via RDP/ping the other machine BY NAME on my local network while also connected to the VPN? Why is ping identifying a MAC address for the machine on my home network, instead of an IP address? And how can I change this so that an IP address is reported instead? For question #1, I can indeed access the other machine on my home network by IP address. I suspect if I put the name-IP pair into my HOSTS file, then I would be able to access it even when connected to the VPN. But I wonder if there is another (more elegant) solution?

    Read the article

  • What methods are available for updating a non-Internet-connected VMWare ESXi host?

    - by romandas
    I have a stand-alone installation of VMWare vSphere Essentials, with a vCenter Server and 3 ESXi 4.0 host servers. The environment is intended to remain as a stand-alone network, with the exception that I can "float" a workstation or server between the 'Net and the VMWare network for patches and maintenance. With other installations, where the Internet is available, I've used the vSphere Host Update utility to connect to VMWare and then apply the patches to the ESXi hosts. My problem is that this utility does not seem to function if it cannot connect to both VMWare and the ESXi host at the same time, as the scan for patches function will not scan the server without connecting to VMWare's site to sync its repository first. Even if I sync it, disconnect from the 'Net and connect to the VMWare network, it still won't scan hosts for required patches -- it will prompt for syncing with VMWare and if you click No to syncing, the scan does not occur. Does anyone know of other options for updating the ESXi hosts in some automated fashion? I believe I can manually pull down required patches and apply them, but this will not scale well, and in the future I'm sure I'll want something a bit more scalable.

    Read the article

  • Sharing between Vista and Windows 7

    - by Metro Smurf
    Vista Ultimate 32 bit Windows 7 Ultimate 64 bit I've read through similar questions about sharing between Win7 and Vista, but none of them have resolved my issue of not being able to share between Win7 and Vista: Connecting to a Vista shared folder from Windows 7 Networking Windows 7 and Vista Enable File sharing in Windows Vista Previously I had previously had my Vista and XP system sharing back and forth without any problems. I was able to access the shares without entering a user name / password in the NT challenge prompt (note: account names and passwords were different on the Vista and XP systems). Currently I replaced my XP system with a Win7 system. Now, when I attempt to access shares to/from Vista / Win7, I am continually prompted with an NT challenge to enter my credentials. Things I've Verified/Tried Both systems are on the same workgroup. Win 7 is using the Home network. Vista is using the Private network. In other words, neither system is using a Public network profile. Enabled file sharing with and without password protection on both Vista and Win7 Tried HomeGroup Connections (win7) with Windows to manage connections and Use user accounts to connect. Reviewed too many online articles to count to trouble shoot. Set the shares to have full control by everyone. Set up the shares directly on the directory and through the share manager. My Question How can I enable file sharing between Vista and Win7 without being prompted with a username/password challenge, ever?

    Read the article

  • How to configure network on Windows Server 2008

    - by Gokhan Ozturk
    I have a IBM x3400 Server Machine with Windows Server 2008 R2 installed on it. But, since I am not expert on networking I have some problems. These roles installed on my server: Active Directory DNS File Sharing Hyper-V ISS VPN There is two network card on them. I configured them like this: Local Connection 1: 192.168.30.3 255.255.255.0 192.168.30.2 127.0.0.1 Local Connection 2: 192.168.30.101 255.255.255.0 192.168.30.6 127.0.0.1 My problem is, when I use this Ip gateways, It is sharing internet to all computers. This is not I want. I want to use Local Connection 1 for internal network. I am giving all computers gateway and DNS IP as 192.168.30.3 The Local Connection 2 is for Hyper-V and VPN connections. 192.168.30.2 and 192.168.30.6 are my modem's gateways. I am using 192.168.30.6 external IP for VPN connections. There is two 24 port switches. There is a connection between them and this two ethernet card connected directly to them. And modems are connected to switches as well (Morems are not near the server. They are somewhere in the building). I disabled network Bridge and removed all ethernet cards from it. With this configuration, all computers can ping my server's IP (192.168.30.3) but on server I cannot ping any clients (Request timeout). What is the best way to configure my network? Thank you. Redgards

    Read the article

  • Can't open shared drive after disconnecting vpn

    - by Matt McMinn
    I use a VPN to connect to my office network. On my local network I have another WinXP machine that shares a printer and a few shared folders. While I'm connected to my work VPN, I can access the shared printer and folders on the other machine just fine, and vice versa. Once I disconnect the VPN, I can't access the local machine any more, and the other machine can't access my machine. The network itself seems ok - I can ping the other machine, get to the internet, and get on to a web server shared by the other machine, but I can't get to the shared folders or printer. If I reconnect to the VPN, my access is restored. I'm guessing this is some sort of authentication thing, but I don't know what. Any ideas? Update This problem is bothering me again, so here's an update. Depending on when I first access the WinXP machine, I either have this problem, or the opposite problem. After a reboot, if I (for example) print, then connect to the VPN, I can't access the machine while on the VPN. If after a reboot I connect to the VPN, then print, I can't access the machine off the VPN. In both cases, if I enable/disable the VPN again, I can access the machine again. Thanks

    Read the article

  • Offloading backups to secondary network

    - by user1467163
    I'm trying to solve a problem- Currently, we are constantly backing up and have no budget for additional servers. Our production network is still a 10/100 and handles voip, SQL plus our backup traffic, and I'd like to offload the backup traffic onto a secondary network- all of our servers have secondary NIC's that are not in use, and all support gigabit (Our switching hardware does not- a topic for another day). I'd like to move my backups off the production network, but I am having a hard time getting the computers to communicate. I am using a Netgear GS724T switch for the backup network- Chosen for cost and because I have used them extensively on networks saturated with ghosting traffic, so I know it's up to the task. I have defined a VLAN, with ports that are not members of any other VLAN. All traffic is untagged on the VLAN. I have set the servers with 192.168.1.10 and 192.168.1.11 addresses, 255.255.255.0 netmask and I have tried a blank GW, using the local IP of the server 192.168.1.whatever address, and I have tried using the switch's production-side IP as the GW. The machines cannot find each other. DNS addresses are blank because I am going purely by IP for now... Any ideas how to get these machines to talk? they are Windows machines, running Server 2008R2 and 2003R2. Thanks!

    Read the article

  • IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

    - by NVRAM
    I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

    Read the article

  • TCP/UDP hole punching from and to the same NAT network

    - by Luc
    I was wondering if tcp/udp hole punching would still work when you are in the same network (behind a NAT), and what the packet's path would be. What happens when using hole punching on the same network, is that it will send a packet out with the same destination and source address. Only the source and destination port would differ. I imagine a router with NAT loopback enabled will handle this as it should, but how about other routers? Would they drop the packet, or would a router (the first?) from the ISP bounce the packet back after which it gets handled okay? I'm wondering because I was thinking about using this technique to circumvent a block between peers in a network (like a school network where clients can only access the internet, but any contact with each other is blocked). The only other option is to use a man in the middle as proxy (tunnel?). The disadvantage of this is that you have to have a server with significantly more bandwidth than one that would only do hole punching. Also the latency would increase significantly.

    Read the article

  • Creating a Logical network diagram

    - by user273284
    Im a student and I have been assigned the task of creating a logical network diagram for the following scenario There are 2 buildings, the first is the head office and the second is the branch. The data centre is in the head office, it contains domain controller, mail server, file server and a web server. it provides wired and wireless access to the staff. the branch building is new and it does not have a network. The two buildings must be connected using a VPN connection. The branch building will not have any servers but just network devices that will provide the connectivity, the users in the branch building will be connected to the head office over the VPN. I had created a diagram based on this scenario, but my teacher rejected it saying that it does not follow Cisco hierarchical Model and the servers were not placed correctly in the diagram. I just wanted some help in this matter so that I Can create my network diagram correctly. If anyone could upload a picture of how the logical diagram should be for this scenario will be helpful, any other resources would also be great.

    Read the article

  • Open ports broken from internal network

    - by ksvi
    Quick summary: Forwarded port works from the outside world, but from the internal network using the external IP the connection is refused. This is a simplified situation to make the explanation easier: I have a computer that is running a service on port 12345. This computer has an internal IP 192.168.1.100 and is connected directly to a modem/router which has internal IP 192.168.1.1 and external (public, static) IP 1.2.3.4. (The router is TP-LINK TD-w8960N) I have set up port forwarding (virtual server) at port 12345 to go to port 12345 at 192.168.1.100. If I run telnet 192.168.1.100 12345 from the same computer everything works. But running telnet 1.2.3.4 12345 says connection refused. If I do this on another computer (on the same internal network, connected to the router) the same thing happens. This would seem like the port forwarding is not working. However... If I run a online port checking service on my external IP and the service port it says the port is open and I can see the remote server connecting and immediately closing connection. And using another computer that is connected to the internet using a mobile connection I can also use telnet 1.2.3.4 12345 and I get a working connection. So the port forwarding seems to be working, however using external IP from the internal network doesn't. I have no idea what can be causing this, since another setup very much like this (different router) works for me. I can access a service running on a server from inside the network both through the internal and external IP.

    Read the article

  • Distributing Microsoft Office Template or Macro over the network

    - by zfranciscus
    We have around 400 users who use Word and we want to make their life easier by distributing templates and macros over the network. The easiest way to do this of course to setup a shared network folder and let them get the appropriate templates and macros. Of course, each user has to know where to copy these files to in their local PC, and we have to rely on constant email communication to let them know for newer version of the macro and templates. The next alternative is to ask them to configure Word to point to these network folder. But of course any disruption to the network means disruption to their work. We are thinking to setup a synchronization mechanism that downloads new templates to their local machine. We are also thinking to make this sync tool to prompt users that it will download new templates - you know just to give them visibility that they are receiving changes. We are wondering what is the best approach that people usually use in their workplaces ? Are there any specific tool that can make this task easier ?

    Read the article

  • Suggestions for transitioning to new GW/private network

    - by Quinten
    I am replacing a private T1 link with a new firewall device with an ipsec tunnel for a branch office. I am trying to figure out the right way to transition folks at the new site over to the new connection, so that they default to using the much faster tunnel. Existing network: 192.168.254.0/24, gw 192.168.254.253 (Cisco router plugged in to private t1) Test network I have been using with ipsec tunnel: 192.168.1.0/24, gw 192.168.1.1 (pfsense fw plugged in to public internet), also plugged in to same switch as the old network. There are probably ~20-30 network devices in the existing subnet, about 5 with static IPs. The remote endpoint is already the firewall--I can't set up redundant links to the existing subnet. In other words, as soon as I change the tunnel configuration to point to 192.168.254.0/24, all devices in the existing subnet will stop working because they point to the wrong gateway. I'd like some ability to do this slowly--such that I can move over a few clients and verify the stability of the new link before moving critical services or less tolerant users over. What's the right way to do this? Change the netmask on all of the devices to /16, and update gateway to point to the new device? Could this cause any problems? Also, how should I handle DNS? The pfsense box is not aware of my Active Directory environment. But if I change DNS to use the local servers, it will result in a huge slowdown as DNS queries will still be routed over the private t1. I need some help coming up with a plan that's not too disruptive but will really let me thoroughly test the stability of the IPSEC tunnel before I make the final switch. The AD version is 2008R2, as are the servers. Workstations are mostly Windows XP SP3. I have not configured the 192.168.1.0/24 as a site in AD sites and services.

    Read the article

  • IPTABLES syntax help to forward Remote Desktop requests to a VM [CentOS host]

    - by NVRAM
    I've a VM running MSWindows XP hosted on my CentOS 5.4 machine. I can rdesktop into it from the hosting machine and work just fine using the private ddress (192.168.122.65), but I now need to allow Remote Desktop access from other computers (not just the machine hosting the VM). [Edit] I only need to allow access for a day or so, so don't want to add a NIC (for XP activation reasons). Could someone help me with the iptables syntax? The VM is on a private/virtual network: 192.168.122.65 and my CentOS machine is on a physical network, at 10.1.3.38 (and 192.168.122.1 as the GW for the virtual net). I found this question, but none of the answers seemed to work and I'm a bit timid at blindly trying variations. My FORWARD rules are as listed. Thanks in advance. # iptables -L FORWARD Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere 192.168.122.0/24 state RELATED,ESTABLISHED ACCEPT all -- 192.168.122.0/24 anywhere ACCEPT all -- anywhere anywhere REJECT all -- anywhere anywhere reject-with icmp-port-unreachable REJECT all -- anywhere anywhere reject-with icmp-port-unreachable RH-Firewall-1-INPUT all -- anywhere anywhere [Edit] If I do play "blindly" is there a simple way to reset the settings on CentOS (a la service network restart)?

    Read the article

  • Route all traffic of home network through VPN

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: ==LAN== Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN ==WAN== Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Route all traffic of home network through VPN [migrated]

    - by user436118
    I have a typical semi advanced home network scenario: A cable modem - eth A wireless router (netgear n600) eth and wlan A home server (Running ubuntu 12.04 LTS, connected over wlan) A bunch of wireless clients (wlan) Lying around I have anoher cheaper wlan router, and two different USB wlan NIC's that are known to work with Linux. ACTA struck. I want to route ALL of my WAN traffic through a remote server through a VPN. For sake of completition, lets say there is a remote server running debian sqeeze where a VPN server is to be installed. The network is then to behave so that if the VPN is not operative, it is separated from the outside world. I am familiar with general system/network practices, but lack the specific detailed knowledge to accomplish this. Please suggest the right approach, packages and configurations you'd use to reach said solution. I've also envisioned the following network configuration, please improve it if you see fit: Client ip:10.1.1.x nm:255.0.0.0 gw:10.1.1.1 reached via WLAN Wlan router 1: ip: 10.1.1.1 nm:255.0.0.0 gw: 10.10.10.1 reached via ETH Homeserver: <<< VPN is initiated here, and the other endpoint is somewhere on the internet. eth0: ip:10.10.10.1 nm: 0.0.0.0 gw:192.168.0.1 reached via WLAN Homeserver: wlan0: ip: 192.168.0.2 nm: 255.255.255.0 gw: 192.168.0.1 reached via WLAN Wlan router 2: ip: 192.168.0.1 nm: 0.0.0.0 gw: set via dhcp uplink connector: cable modem Cable Modem: Remote DHCP. Has on-board DHCP server for ethernet device that connects to it, and only works this way. All this WLAN fussery is because my home server is located in a part of the house where a cable link isnt possible unfortunately.

    Read the article

  • Network outage caused by SMC8013WG Cable Modem/Router ?

    - by mkocubinski
    At work, we have a basic Class C Network. The gateway/router is a SMC8013WG (stock comcast commercial cable modem), and simple unmanaged switch (HP Pro Curve 1400 24G). The SMC8013WG is our default gateway as well as DHCP server. Periodically, I'd say almost every other day.. the entire network will just stop responding. I won't be able to ping/see the gateway, any computers on our local network, or anything on the internet. The only way to fix this is to unplug the Comcast cable modem, wait, and plug back in. This unfailingly fixes the problem. But this doesn't make much sense to me.. shouldn't the network still be fine locally, since everything is plugged into the switch anyway? Why would resetting the router fix this? Can anyone suggest anything to check to in order to narrow this problem down? Just to be clear.. here is the basic topology: { Internet } -- (12.345.67.89) Comcast Cable Modem (192.168.1.1) -- Switch -- 192.168.1.2-254 P.S. Our IT guy is in about 3 hours a day every other week or so, so.. we're kind of on our own most of the time.

    Read the article

  • Virtual machine shows no network adapter

    - by Logman
    I had a an old Lotus/Domino server (R5), I just virtualized. It ran Windows 2000 server. I had to use Vmware Converter v3.x to create the vm because it was the only one I could find that could actually do a Win2k machine that had no service packs. It was just put out to pasture a couple months ago, so it isn't being used except to store the old email for archiving. It took a bit of work to get it onto the Win2008R2 servers hyper-v but I got it there. Problem now, is that the network adapter didn't show up. I could not install the guest additions because it needed sp4 + on win2k... so I installed sp4 onto the vm guest. Everything seems fine except the network adapter still isn;t showing up in device manager. NOthing. Now this server had an external ip, and I did not want it to be put onto the internal virtual network. I am going to use a dedicated adapter on the host (hyper-v server) if that matters... but this shouldn't matter if the the guests network adapter doesn't show at all. Thoughts?

    Read the article

  • Automatic switching of network card when vm is moved

    - by spock
    I have two hosts in a pool and I used to be able to move the vm around and they will start without any problem. But after I played around with some network setting, which I don't remember what, I started getting "This VM needs storage that cannot be seen from that server" message. As you can tell I am a beginner with Xenserver. Here is the very simple environment: 2 host servers with their own local hard disk and network card. One is a Pool master. Problem: Power off a vm and move vm from one server to another, or clone one vm to the other server. It used to be able to start up right away. Now, I need to delete one of the network that does not belong to the server, then it will start. Otherwise, the above error msg popup. The two networks (one for each network card in each host) are in the Networking tab of the vm, as well as in the host's networking tab. I googled but all I got to empty the DVD drive, which is not the problem here. Thanks in advance!

    Read the article

  • Windows 7 computer apparently connected to working wireless network but can't access router page or internet

    - by Hemmer
    I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

    Read the article

  • Private subnet for VM server host-only network

    - by Derek Pressnall
    At my current job, we distribute a product based on a Linux server with multiple VMs defined (using KVM / libvirt). We are planning to expose limited ports to the customer's network, and use iptables to direct inbound traffic to the appropriate internal VM. My question: is there a class of private subnets that I can use for the internal host-only network that is least likely to conflict with a client IP subnet? Specifically, if I choose a /24 out of any of the RFC-1918 defined private subnets (such as 192.168.x.x), there is a chance of conflicting with a customer-used range. I noticed that several current VM implementations default to 192.168.122.x -- is this due to an RFC that I'm not familiar with, and therefore this is a safe range to use (that most network admins would avoid)? Or did the various VM vendors just pick that range randomly? I guess I'm looking for an IP range that is more private than the existing private (RFC1918) addresses. The only other thought I had was to use one of the "Test Net" IP ranges reserved for documentation purposes (RFC 5737). Note, that I'm not worried about a customer's network blocking these IPs, as this is only internal to our server (packets get NATted before leaving the box). However this does seem more unorthodox than just sticking with the default 192.168.122.x/24 subnet.

    Read the article

  • How to manage enterprise network of Linux machines?

    - by killy9999
    I work at the university. In my institute we have six computer laboratories used for teaching. Each lab has almost 20 computers, which gives over 100 machines total. Computers have either Windows XP or Windows 7 Eneterprise operating system. We use Symantec Ghost to manage all the computers. Each computer has a Ghost client installed, which allows to control computers over network. Every six months we restore a master image on one of the computers in a lab, update that image and distribute it over the network to all computers in a laboratory. Thanks to Ghost client this is done automatically with just a few clicks. Recently I suggested that it would be good to have Linux installed in the laboratories. The administrators were concerned that we would not be able to manage that many computers if each would have to be updated manually. The question is: how to manage such a huge network of Linux machines in an automated way? To make the description of our network more complete I'll add that all students have their accounts (about few thousand users) on a central server. These are accessed via LDAP. To use a computer in laboratory each student has to log in using his own account.

    Read the article

  • Network using only switches

    - by mschultz
    So I'm not a network guy - but here's what I want to do - I have an existing network using wifi, which I like, and which is used to connect several computers to the internet. It is headed up by a router, which is in another part of the building. Three of those computers are in my office. All three have gigabit wired ethernet. I have a gigabit switch. Here's what I want to do: Build a 2nd network, out of just that switch, which allows all 3 computers to connect to each other (just to each other is fine, for this purpose, they need no internet). I have a distributed computing task (rendering high-quality fractal artwork, as it were), that requires the best connection speed to all 3 computers. I want them to be able to "talk to each other" as quickly as possible, with the fewest dropped packets (the dataflow over this network will be quite high). So how do I do this. I'm not a networking guy at all - I tried connecting them all, and nobody got an IP address (which I assume is because nobody is running a DNS server?). What all do I need to do to make this work? PS - two are running windows, one is running ubuntu.

    Read the article

  • vmware network installation problem

    - by shantanu
    After installation from vmware_bunddle it shows network device error during configuration(First run). Log File: 2012-04-03T20:01:24.881+06:00| vthread-3| I120: Log for VMware Workstation pid=5766 version=8.0.2 build=build-591240 option=Release 2012-04-03T20:01:24.881+06:00| vthread-3| I120: The process is 64-bit. 2012-04-03T20:01:24.881+06:00| vthread-3| I120: Host codepage=UTF-8 encoding=UTF-8 2012-04-03T20:01:24.881+06:00| vthread-3| I120: Host is Linux 3.2.0-19-generic Ubuntu precise (development branch) 2012-04-03T20:01:24.880+06:00| vthread-3| I120: Msg_Reset: 2012-04-03T20:01:24.880+06:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/usr/lib/vmware/settings": No such file or directory. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: ---------------------------------------- 2012-04-03T20:01:24.880+06:00| vthread-3| I120: PREF Optional preferences file not found at /usr/lib/vmware/settings. Using default values. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: Msg_Reset: 2012-04-03T20:01:24.880+06:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/config": No such file or directory. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: ---------------------------------------- 2012-04-03T20:01:24.880+06:00| vthread-3| I120: PREF Optional preferences file not found at /root/.vmware/config. Using default values. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: Msg_Reset: 2012-04-03T20:01:24.880+06:00| vthread-3| I120: [msg.dictionary.load.openFailed] Cannot open file "/root/.vmware/preferences": No such file or directory. 2012-04-03T20:01:24.880+06:00| vthread-3| I120: ---------------------------------------- 2012-04-03T20:01:24.881+06:00| vthread-3| I120: PREF Failed to load user preferences. 2012-04-03T20:01:24.881+06:00| vthread-3| W110: Logging to /tmp/vmware-root/modconfig-5766.log 2012-04-03T20:01:25.200+06:00| vthread-3| I120: modconf query interface initialized 2012-04-03T20:01:25.201+06:00| vthread-3| I120: modconf library initialized 2012-04-03T20:01:25.269+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.278+06:00| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.278+06:00| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-04-03T20:01:25.278+06:00| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-04-03T20:01:25.278+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.284+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.306+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.355+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:25.355+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.362+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.383+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.434+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:25.502+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.507+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.511+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.516+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.521+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.561+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.566+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.571+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.576+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.581+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.586+06:00| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.586+06:00| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-04-03T20:01:25.586+06:00| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-04-03T20:01:25.586+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.593+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.614+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.663+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:25.740+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.747+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.752+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.757+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.762+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:25.767+06:00| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.767+06:00| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-04-03T20:01:25.767+06:00| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-04-03T20:01:25.767+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:25.772+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.792+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:25.843+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:26.838+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:26.848+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:26.853+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:26.858+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:26.863+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:28.460+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:28.460+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:28.466+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:28.488+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:28.542+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:28.542+06:00| vthread-3| I120: Building module vmmon. 2012-04-03T20:01:28.553+06:00| vthread-3| I120: Extracting the sources of the vmmon module. 2012-04-03T20:01:28.615+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:01:36.499+06:00| vthread-3| I120: Installing module vmmon from /tmp/vmware-root/modules/vmmon.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:01:36.507+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmmon.ko 2012-04-03T20:01:58.314+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:01:58.315+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:01:58.336+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:58.379+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:01:58.431+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:01:58.431+06:00| vthread-3| I120: Building module vmnet. 2012-04-03T20:01:58.431+06:00| vthread-3| I120: Extracting the sources of the vmnet module. 2012-04-03T20:01:58.541+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmnet-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:05.973+06:00| vthread-3| I120: Failed to compile module vmnet! 2012-04-03T20:02:05.984+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:02:05.984+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:02:05.990+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:06.015+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:06.067+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:02:06.067+06:00| vthread-3| I120: Building module vmblock. 2012-04-03T20:02:06.067+06:00| vthread-3| I120: Extracting the sources of the vmblock module. 2012-04-03T20:02:06.141+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmblock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:13.531+06:00| vthread-3| I120: Installing module vmblock from /tmp/vmware-root/modules/vmblock.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:02:13.532+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmblock.ko 2012-04-03T20:02:19.090+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:02:19.090+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:02:19.097+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:19.117+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:19.173+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:02:19.173+06:00| vthread-3| I120: Building module vmci. 2012-04-03T20:02:19.174+06:00| vthread-3| I120: Extracting the sources of the vmci module. 2012-04-03T20:02:19.284+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:28.525+06:00| vthread-3| I120: Installing module vmci from /tmp/vmware-root/modules/vmci.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:02:28.526+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmci.ko 2012-04-03T20:02:31.760+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:02:31.760+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:02:31.766+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:31.786+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:02:31.838+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:02:31.838+06:00| vthread-3| I120: Building module vmci. 2012-04-03T20:02:31.839+06:00| vthread-3| I120: Extracting the sources of the vmci module. 2012-04-03T20:02:31.864+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:33.684+06:00| vthread-3| I120: Building module vsock. 2012-04-03T20:02:33.685+06:00| vthread-3| I120: Extracting the sources of the vsock module. 2012-04-03T20:02:33.809+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vsock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:02:41.050+06:00| vthread-3| I120: Installing module vsock from /tmp/vmware-root/modules/vsock.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:02:41.051+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vsock.ko 2012-04-03T20:03:02.757+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.762+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.767+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.771+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.776+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.782+06:00| vthread-3| I120: Validating path /lib/modules/preferred/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:02.782+06:00| vthread-3| I120: Failed to find /lib/modules/preferred/build/include/linux/version.h 2012-04-03T20:03:02.782+06:00| vthread-3| I120: Failed version test: /lib/modules/preferred/build/include/linux/version.h not found. 2012-04-03T20:03:02.782+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:02.790+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:02.814+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:02.865+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:02.958+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.968+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.973+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.978+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:02.983+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:04.372+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:04.372+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:04.378+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:04.399+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:04.452+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:04.452+06:00| vthread-3| I120: Building module vmmon. 2012-04-03T20:03:04.452+06:00| vthread-3| I120: Extracting the sources of the vmmon module. 2012-04-03T20:03:04.486+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmmon-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:05.976+06:00| vthread-3| I120: Installing module vmmon from /tmp/vmware-root/modules/vmmon.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:03:05.977+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmmon.ko 2012-04-03T20:03:09.056+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:09.057+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:09.065+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:09.090+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:09.142+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:09.142+06:00| vthread-3| I120: Building module vmnet. 2012-04-03T20:03:09.142+06:00| vthread-3| I120: Extracting the sources of the vmnet module. 2012-04-03T20:03:09.169+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmnet-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:12.072+06:00| vthread-3| I120: Failed to compile module vmnet! 2012-04-03T20:03:12.090+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:12.090+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:12.098+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:12.121+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:12.179+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:12.179+06:00| vthread-3| I120: Building module vmblock. 2012-04-03T20:03:12.179+06:00| vthread-3| I120: Extracting the sources of the vmblock module. 2012-04-03T20:03:12.205+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmblock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:15.340+06:00| vthread-3| I120: Installing module vmblock from /tmp/vmware-root/modules/vmblock.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:03:15.341+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmblock.ko 2012-04-03T20:03:18.451+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:18.451+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:18.457+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:18.480+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:18.531+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:18.531+06:00| vthread-3| I120: Building module vmci. 2012-04-03T20:03:18.531+06:00| vthread-3| I120: Extracting the sources of the vmci module. 2012-04-03T20:03:18.569+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:19.787+06:00| vthread-3| I120: Installing module vmci from /tmp/vmware-root/modules/vmci.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:03:19.789+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vmci.ko 2012-04-03T20:03:22.933+06:00| vthread-3| I120: Trying to find a suitable PBM set for kernel 3.2.0-19-generic. 2012-04-03T20:03:22.933+06:00| vthread-3| I120: Validating path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic 2012-04-03T20:03:22.939+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:22.959+06:00| vthread-3| I120: Your GCC version: 4.6 2012-04-03T20:03:23.009+06:00| vthread-3| I120: Header path /lib/modules/3.2.0-19-generic/build/include for kernel release 3.2.0-19-generic is valid. 2012-04-03T20:03:23.009+06:00| vthread-3| I120: Building module vmci. 2012-04-03T20:03:23.009+06:00| vthread-3| I120: Extracting the sources of the vmci module. 2012-04-03T20:03:23.034+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vmci-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:24.227+06:00| vthread-3| I120: Building module vsock. 2012-04-03T20:03:24.227+06:00| vthread-3| I120: Extracting the sources of the vsock module. 2012-04-03T20:03:24.254+06:00| vthread-3| I120: Building module with command: /usr/bin/make -j -C /tmp/vmware-root/modules/vsock-only auto-build SUPPORT_SMP=1 HEADER_DIR=/lib/modules/3.2.0-19-generic/build/include CC=/usr/bin/gcc GREP=/usr/bin/make IS_GCC_3=no VMCCVER=4.6 2012-04-03T20:03:26.125+06:00| vthread-3| I120: Installing module vsock from /tmp/vmware-root/modules/vsock.o to /lib/modules/3.2.0-19-generic/misc. 2012-04-03T20:03:26.126+06:00| vthread-3| I120: Registering file: /usr/lib/vmware-installer/2.0/vmware-installer --register-file vmware-vmx regular /lib/modules/3.2.0-19-generic/misc/vsock.ko My System details: cpu : AMD APU dual core E450 ram: 2GB ubuntu: 12.04 (64 bit) I have downloaded Latest vmware version. Thanks in advance

    Read the article

  • Cisco Prime NCS not starting

    - by Kwazii
    I have received the Cisco Prime OVA file and which we placed onto an Oracle virtual environment. We turn the VM on and the CLI boots, When we try to start the NCS service we get errors. HOSTNAME/USER# ncs start Starting Network Control System... Exception in thread "main" java.lang.NullPointerException at com.cisco.wnbu.udi.impl.UDIManager.isPhysicalAppliance(UDIManager.java:184) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:335) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Logs HOSTNAME/USER# show logging 07/18/13 10:25:38.878 INFO [system] [main] Setting management interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting peer server interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting client interface address to 192.168.0.10 07/18/13 10:25:38.884 INFO [system] [main] Setting local host name to HOSTNAME 07/18/13 10:25:40.341 ERROR [system] [main] THROW java.sql.SQLRecoverableException: IO Error: The Network Adapter could not establish the connection at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:419) at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:536) at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:228) at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:32) at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:521) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at com.cisco.server.persistence.util.OracleSchemaUtil.openConnection(OracleSchemaUtil.java:277) at com.cisco.server.persistence.util.OracleSchemaUtil.dbServerUp(OracleSchemaUtil.java:836) at com.cisco.packaging.DBAdmin.dbServerUp(DBAdmin.java:1429) at com.cisco.packaging.WCSAdmin.status(WCSAdmin.java:833) at com.cisco.packaging.WCSAdmin.status(WCSAdmin.java:757) at com.cisco.packaging.WCSAdmin.wcsServerUp(WCSAdmin.java:637) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:294) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Caused by: oracle.net.ns.NetException: The Network Adapter could not establish the connection at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:375) at oracle.net.resolver.AddrResolution.resolveAndExecute(AddrResolution.java:422) at oracle.net.ns.NSProtocol.establishConnection(NSProtocol.java:678) at oracle.net.ns.NSProtocol.connect(NSProtocol.java:238) at oracle.jdbc.driver.T4CConnection.connect(T4CConnection.java:1054) at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:308) ... 15 more Caused by: java.net.ConnectException: Connection refused at java.net.PlainSocketImpl.socketConnect(Native Method) at java.net.PlainSocketImpl.doConnect(Unknown Source) at java.net.PlainSocketImpl.connectToAddress(Unknown Source) at java.net.PlainSocketImpl.connect(Unknown Source) at java.net.SocksSocketImpl.connect(Unknown Source) at java.net.Socket.connect(Unknown Source) at oracle.net.nt.TcpNTAdapter.connect(TcpNTAdapter.java:209) at oracle.net.nt.ConnOption.connect(ConnOption.java:123) at oracle.net.nt.ConnStrategy.execute(ConnStrategy.java:353) ... 20 more 07/18/13 10:25:40.347 INFO [admin] [main] 07/18/13 10:25:40.347 INFO [admin] [main] Starting Network Control System... 07/18/13 10:25:40.347 INFO [admin] [main] 07/18/13 10:25:40.394 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setPersistenceDirectory(UDIManager.java:139) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:332) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.396 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setVirtualPID(UDIManager.java:169) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:333) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.397 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.setPhysicalPID(UDIManager.java:154) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:334) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) 07/18/13 10:25:40.397 ERROR [admin] [main] Problem using CARS API: com.cisco.cars.fnd.CARSException: CARS_FAILURE : -999 : Failed to get UDI configuration. : Failure occurred during request at com.cisco.cars.fnd.CARSException.analyzeReturnCode(CARSException.java:118) at com.cisco.cars.serviceEngine.impl.EngineAdminServiceImpl.getUDI(EngineAdminServiceImpl.java:66) at com.cisco.wnbu.udi.impl.UDIManager.generateUDI(UDIManager.java:69) at com.cisco.wnbu.udi.impl.UDIManager.getUDI(UDIManager.java:112) at com.cisco.wnbu.udi.impl.UDIManager.isPhysicalAppliance(UDIManager.java:184) at com.cisco.packaging.WCSAdmin.start(WCSAdmin.java:335) at com.cisco.packaging.WCSAdmin.runMain(WCSAdmin.java:281) at com.cisco.packaging.WCSAdmin.main(WCSAdmin.java:901) Any help is appreciated, Thanks

    Read the article

  • Two network adapters on Ubuntu Server 9.10 - Can't have both working at once?

    - by Rob
    I'm trying to set up two network adapters in Ubuntu (server edition) 9.10. One for the public internet, the other a private LAN. During the install, I was asked to pick a primary network adapter (eth0 or eth1). I chose eth0, gave the installer the details listed below in the contents of /etc/network/interfaces, and carried on. I've been using this adapter with these setting for the last few days, and every thing's been fine. Today, I decide it's time to set up the local adapter. I edit the /etc/network/interfaces to add the details for eth1 (see below), and restart networking with sudo /etc/init.d/networking restart. After this, attempting to ping the machine using it's external IP address fails, but I can ping it's local IP address. If I bring eth1 down using sudo ifdown eth1, I can successfully ping the machine via it's external IP address again (but obviously not it's internal IP address). Bringing eth1 back up returns us to the original problem state: external IP not working, internal IP working. Here's my /etc/network/interfaces (I've removed the external IP information, but these settings are unchanged from when it worked) rob@rhea:~$ cat /etc/network/interfaces # This file describes the network interfaces available on your system # and how to activate them. For more information, see interfaces(5). # The loopback network interface auto lo iface lo inet loopback # The primary (public) network interface auto eth0 iface eth0 inet static address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx network xxx.xxx.xxx.xxx broadcast xxx.xxx.xxx.xxx gateway xxx.xxx.xxx.xxx # The secondary (private) network interface auto eth1 iface eth1 inet static address 192.168.99.4 netmask 255.255.255.0 network 192.168.99.0 broadcast 192.168.99.255 gateway 192.168.99.254 I then do this: rob@rhea:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... [ OK ] rob@rhea:~$ sudo ifup eth0 ifup: interface eth0 already configured rob@rhea:~$ sudo ifup eth1 ifup: interface eth1 already configured Then, from another machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for [external ip]: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), Back on the Ubuntu server in question: rob@rhea:~$ sudo ifdown eth1 ... and again on the other machine: C:\Documents and Settings\Rob>ping [external ip] Pinging [external ip] with 32 bytes of data: Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Reply from [external ip]: bytes=32 time<1ms TTL=63 Ping statistics for [external ip]: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 0ms, Maximum = 0ms, Average = 0ms So... what am I doing wrong?

    Read the article

< Previous Page | 82 83 84 85 86 87 88 89 90 91 92 93  | Next Page >