Search Results

Search found 5373 results on 215 pages for 'wireless bridge'.

Page 89/215 | < Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >

  • need help upgrading small business wifi network

    - by Henry Jackson
    Our small business currently has 3 wireless access points around the building, each with their own SSID. Security is done with WEP (ick) and MAC address filtering (double ick). We are trying to reconfigure the setup, with these goals: wifi roaming between the access points user-based authentication that isn't as annoying as MAC address filtering. 1) The entire building is hardwired with ethernet, so I assume it should be easy to set up the routers to act as one big network, but I can't figure out how. Can someone point me in the right direction? The routers are consumer-grade linksys routers, is it possible to do this without getting new hardware? 2) For security, we will probably upgrade to WPA2, and I'm thinking of using the Enterprise version so that users can log in with a username, instead of having a single key (so if an employee leaves or something, their access can be removed). We have several on-site Windows servers, can one of them be set up as a RADIUS server, or is that best left to a dedicated machine (again, using existing hardware is good).

    Read the article

  • Solution to wirelessly project tablet desktop?

    - by Robert
    I’m trying to find a device that would allow a windows 7 client to wirelessly connect and display their screen to a projector while still connected to the wireless network. The idea is to allow a professor to still project and display content while walking around the room with their tablet. To date, haven’t been able to find a solution that meets the requirements, has anyone stumbled across one yet? Requirements Must support Windows 7 Must be able to connect to WPA2 Personal(and hopefully enterprise) Must not use any usb dongles – those get lost/damaged given a chance. Goal Wirelessly display screen to projector without cables from tablet/laptop.

    Read the article

  • Why can't connect with second computer in same LAN and settings?

    - by user930450
    I'm trying to connect to WLAN with notebook. The notebook works fine with other WLANs. It can authenticate, signal is "very good" but it says "can't access internet". (On Windows it's small yellow exclamation mark on the signal). With other computer exactly in the same location, with the same settings, it's possible to connect. Both are configurated to get IP dynamically. One difference is that the other computer is using "Ralink wireless" instead normal windows client to connect. But does this make a difference? the settings are the same. What could be the reason?

    Read the article

  • GPO: Disable WiFi when computer is connected to LAN with wire

    - by r0ca
    Hi all! Is anyone of you know how to disable, thru a GPO, the Wireless connection as soon as the computer is connected to the LAN with a wire. By example, a user is at home with his laptop, connected to his home wifi connection. He leaves and comes to the office but the Wifi is still enabled. He plugs the ethernet cable in the computer and then, both wifi and wire connection are enable. I would like to apply a GPO that does this... Thanks a bunch!

    Read the article

  • Presentation software requires admin rights to install - any way to remove this requirement?

    - by James F
    I have some wireless presentation software which I use in a meeting room in order to allow end users to hold presentations here and wirelessly have their laptop screens showing on the TV on the wall. Unfortunately the .exe file requires admin rights to install therefore requiring that either the user requests temporary admin rights beforehand, I install it using my admin account or that we use a VGA/HDMI cable. Is there a way to remove the admin right requirement from a .exe or a .msi file so that it can be installed freely by any user? We are using XP for now but will be moving to 7 soon. Thanks James

    Read the article

  • What is the right way to use Internet Sharing in OS X?

    - by Bob King
    For a while now I've been using the Wireless in my Mac Mini as a seperate WiFi access point because my main router doesn't quite cover my whole house. There is a dedicated CAT 5E line down to the Mini, which has a static IP address. I've turned Internet Sharing on, using Airport/WiFi but it seems my options for security are limited. Can I do WPA2? Also, it seems like my iPhone only connects 25% of the time, and the rest of the time it claims I've given a bad password. I've tried "Forget this network" repeatedly.

    Read the article

  • My D-Link Router is only allowing one connection

    - by Blaze
    My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

    Read the article

  • Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

    - by Herb Caudill
    In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

    Read the article

  • How to connect Android phone to a Wifi network using PPPoE?

    - by Slavo
    I have an ISP at home, which provides me with a PPPoE connection. My router supports that and I've configured it to autoconnect periodically, so I don't have to type my username and password each time. When I connect to the Wireless router from the PC, I have internet and everything works fine. However, when I do so using my Android phone, there's no internet connection on the phone. It connects to the router, but I cannot open any web page. How can I enable internet access from such an ISP on my phone? Is it something in the router setup? The router is Linksys WRT54GL.

    Read the article

  • How to troubleshoot ping request time out

    - by user28317
    I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

    Read the article

  • Is an Adnroid-based Phone a Suitable MP3 Player for Music Streamed over the Internet?

    - by James McFarland
    I am considering getting an HTC phone running Android from Verizon Wireless when I next upgrade my phone. I also have an online account with a music vendor, where I have rights to listen to my collection, but not download the MP3s. Further, I have an unlimited data plan and Wi-Fi, so I have full access to bandwidth volume without any concerns. I am especially interested in mounting my phone in a car kit, and streaming my online music to my car's sound system while driving. If you are experienced in this scenario, or have tried this scenario - Is is reasonable to expect my HTC Android phone to provide me with streaming music via my cell data plan anywhere I get cell service?

    Read the article

  • bluetooth doesn't recognize mouse (and other devices)... sometimes

    - by Angelo
    I have a problem with bluetooth with Vista, running on my MacBook. It often doesn't recognize my wireless Magic Mouse. And I saw that it even doesn't seem to start as the pictogram in the task-bar isn't there most of the time I run Vista. But I'm only an Apple-nerd, so I don't know to much about this issue on Vista. When reinstalling Boothcamp or other updates, then once in a while bluetooth recognizes my own mouse (and other devices from some neighbours... so that implicates that the problem must be the bluetooth function in the first place, not my mouse.) Is there some update for the bluetooth application? Angelo

    Read the article

  • Music Streaming Devices

    - by Skizz
    I'm looking for peoples opinion on wireless music streaming devices - something like this. I have an iTunes library hosted on an ubuntu server and I'm looking for something to allow me to listen to all the albums stored on it. Ideally, it should provide a good quality playback both over headphones and through speakers so that everyone can hear it. It doesn't need to be ultra-portable - being able to move the system and plug in a mains lead should be enough, so a single, integrated unit is preferable. One product per answer please and if you've used a product, vote it up or down depending on whether it's any good or not. Use comments to highlight good/bad points.

    Read the article

  • How to connect a wifi router to a cable modem router?

    - by DavidD
    Here's the thing: I have a cable modem router (Thomson TCW710) with wifi-g that I rent from my cable company. I would like to use a wireless-n router (D-Link DIR-655, that I received for free) with it in order to take advantage of the faster wifi. I basically need advice on how to architecture my home network with these two beasts. What configuration should I need to apply on my old and new router to make it all work? The two routers will of course be connected together with a RJ-45 cable.

    Read the article

  • IP camera's multicast/RTSP conflicting with 2.4GHz Wi-Fi?

    - by jayson
    Here at our business we have a Netgear R7000 running DD-WRT. I have been slowly adding IP cameras which I run using Blue Iris software. The last camera I bought (which is NOT a wireless camera), when I plug it into the network I start having really bad connection issues on the 2.4GHz Wi-Fi network. The 5GHz works fine, just the 2.4GHz all of the sudden has trouble connecting, as if it's conflicting. I've tried playing with the camera settings, different IP addresses, HTTP ports, etc, and discovered it to be a conflict with multicast. When multicast is checked, the Wi-Fi has issues but my video streams via Blue Iris. When unchecked, Wi-Fi works fine but the video won't stream through Blue Iris. The problem is there are no settings in the camera to change the RTSP port, which is set to 34567. Does anyone know something that could fix this issue? It all seems very strange to me but maybe someone has an idea?

    Read the article

  • Why would my mouse pointer be jerky when it can't get a signal from my router?

    - by izb
    I've got a fairly new PC but when moving the mouse across the screen, the pointer jerks as if the PC is freezing momentarily every second or so. Strangely, this only seems to happen if the signal from the wifi router is bad. If I move the PC closer to the router to get a full signal, it's fine. It also seems to affect the keyboard; Opening notepad and holding down a key shows the same momentary freezes. -- Update: It's a logitech wireless mouse, and a wired USB logitech keyboard.

    Read the article

  • How to troubleshoot ping request time out [closed]

    - by user28317
    I have a Windows 7 and an XP machine connected to a NETGEAR wireless router. Both machines can log into the network and surf the web. Both are connecting wirelessly. I can ping the router from each machine and get a reply. I can ping each machine from the router and get a reply. But i cannot ping each machine from the other; getting a request time out. Subnet IP Addresses are 192.168.1.* Router =1; Win7 = 10; XP = 11; Firewall is currently off in both systems. Since i can ping from router im picking that not the problem anyway. If i try to ping from xp to win7 i get Request Timed Out. If i try to ping from Win7 to Xp i get destination host unreachable. What should i do now? Thanks

    Read the article

  • Windows 7 Default Gateway problem

    - by Matt
    I have a strange problem (or at least seems strange to me) the below are IP configurations for two laptops on my home network which consists of a main router 192.168.11.1 and a connected wireless router (i know this can cause problems but has always worked until I got the win7 machine) at 192.168.11.2 with DHCP disabled. Laptop 1 - Win XP IP: Dynamically assigned by main router default gateway: 192.168.11.1 (main router) This machine gets perfect connectivity. Laptop 2 - Win7 IP: dynamically assigned by main router Default Gateway: 192.168.11.2 THIS IS THE PROBLEM... I cannot seem to get this machine to default to the main router for the gateway UNLESS I go to a static configuration which I would rather not do since I regularly go between my home and public networks. Why is my Win7 machine not finding the main gateway the same way that the other laptop is? I believe that the rest of my setup is fine as it has always worked and it works perfectly when set as static ip and gateway. Please help! Thanks

    Read the article

  • How do I get a 300Mbps connection over 802.11n?

    - by Daniel Schaffer
    I just bought a new wireless setup, consisting of a Cisco E2000 router, Edimax 7718un USB adapter for my laptop and an Edimax 7728in PCI adapter for my HTPC (which isn't in a location I can run cat5 to). I have to stay in the 2.4GHz band because I have an iPhone and a Wii that will need to connect. I'm aware that 11g devices will drop speeds for 11n devices, but they aren't connected yet. The fastest connection I've been able to get, with the router within 5 feet of either the laptop or HTPC is 144Mbps. The router has settings for "20MHz" and "Auto (20 MHz or 40Mhz) channel width, which I've set to the "Auto" setting. I haven't been able to find anything similar for either of the Edimax adapters. This is the first I've dealt with 11n, so I'm not even sure what else could be causing a problem. How do I get up to 300Mbps, or at least a fair bit closer?

    Read the article

  • Can't ping IPs for devices not part of Windows Domain

    - by GiddyUpHorsey
    I have a home network with a Trendnet wireless router and a Windows Domain. The DNS server is on a Windows 2000 Server and is configured to forward queries to DNS servers provided by the ISP. The router provides DHCP and is configured with the Windows 2000 Server as the DNS server. When I connect iPhones to the network over WiFi, the router can ping the iPhones through its browser based admin interface, but Windows machines that are part of the Windows Domain cannot. A laptop was connected to the network over WiFi that wasn't joined to the domain and it could see the iPhones. All machines either have a fixed or DHCP allocated IP on the 192.168.0.* subnet. How do I configure the DNS server or the Windows Domain so that Windows machines can see the iPhones?

    Read the article

  • Logitech MX3200 keyboard stopped working

    - by Roy Rico
    I have a Logitech MX3200 wireless keyboard and mouse set, and keyboard stopped working. I was working with it and it just stopped in the middle of using it. Some notes: The mouse still works flawlessly, i've tried to reconnect the KB i've tried to reconnect everything, mouse reconnects, keyboard reconnects (or pretends to) I've tried to hard reset (holding the connect button on the receiver for 10 seconds). I've tried new batteries I took out the batteries out of the KB & Mouse and unplugged the receiver over night. The media keys still work (launches winamp) but they main keys does not At this point, i've tried everything I've seen online. I just want to know is my keyboard dead in the water? I would say it's been about 8 months to a year since i've bought it, and the articles i find on the internet all say that's as long as they last... is this true? what's everyone's experience? I hope it's not true.

    Read the article

  • Multiple WAPs: Bandwidth, Frequency Considerations

    - by Pete Cresswell
    The router in my LAN closet does 2 and 5 GHz. In the kitchen, I have a single-band 2 GHz WAP, and in the garden shed I have another single-band 2 GHz WAP. All are set to Bandwidth = 40 MHz, Wireless Network Mode = N-Only. The kitchen WAP and the LAN closet router both come up with multiple bars on my smart phone from almost anywhere in the house. The garden shed WAP will register one bar... but only sometimes. The Questions: Are these things in danger of butting heads? Should I re-set them to Bandwidth = 20 MHz? Bandwidth = Auto? Are there any tools that I could use on an Android smart phone, iPod, or WiFi-enabled laptop to make my own analysis?

    Read the article

  • wifi connection turns off oll the time

    - by er-v
    Hello! I realy need help with one strange problem. I have a wifi network in my appartment with wireless N home router Trendnet tew-652BRP. Everething work fine for three of my laptops, but I have one PC with D-Link DWA-140 adapter. It looses connection 2-3 times in 5 minutes. There is following messages in my system log when it does so: The browser has forced an election on network \Device\NetBT_Tcpip_{9537A5C1-3B43-4C56-B94C-CE69A257C3AD} because a master browser was stopped. The TCP/IP NetBIOS Helper service was successfully sent a stop control. The reason specified was: 0x40030011 [Operating System: Network Connectivity (Planned)] Comment: None The TCP/IP NetBIOS Helper service entered the stopped state. in order of appearence. How can I stop it? I have the latest driver installed.

    Read the article

  • Is it possible to sync specific router settings across multiple routers?

    - by Betard Fooser
    I recently purchased a second Linksys wireless routers set up on the other side of my home and I am wondering if it is possible to somehow sync particular settings between the two? For instance what I am really after is the "MAC Filter List". I would "like" to be able to maintain the list on both routers without having to manually type in the field values. maybe this isn't possible, or has an easy answer, but hopefully those of you who know will cut me a bit of slack. I tried to "google" the answer to this of course, but it seems any searches with the words "sync" and "router" and/or "wifi" result in pages of people having issues with synching their iOS devices over wifi. I would say that have decent amount of networking knowledge in regards to average home networks, and I imagine in larger businesses / corporations they must have a "simpler" way of maintaining things like this. Any insight to point me in the right direction will be much appreciated.

    Read the article

  • No Drivers in Ubuntu 9.1!!!

    - by Chris
    I have a Lenovo G550 and I installed Ubuntu on it through Windows and I have no drivers. No sound, no wireless. I previously had installed it through Windows Vista with no problems at all. I now run Windows 7 and cannot seem to get it to function properly. I tried installing the recommended drivers to make sure the proper ones were installed and that still did nothing. Any one have ANY idea what could be happening? I just don't feel like dealing with it.

    Read the article

< Previous Page | 85 86 87 88 89 90 91 92 93 94 95 96  | Next Page >