Search Results

Search found 5373 results on 215 pages for 'wireless bridge'.

Page 91/215 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • MacBook Pro with Time Capsule can not see Samsung CLX 3175FW wireless printer on Bonjour

    - by syncopat
    I have a MacBook Pro running OS X 10.6 and another MacBook Pro running OS X 10.5. Neither see my Samsung printer when I click on Bonjour. Needless to say neither will print. I have a Time Capsule connected wirelessly to my MacBook Pros. I have tried reinstalling drivers for the printer but nothing seems to work. I tried this approach because when Apple replaced my Time Capsule and I went to print the way I had initially been running printing requests would get hung up. Any suggestions would be helpful?

    Read the article

  • DNS Settings in Cisco Wireless Lan Controllers

    - by Braden
    The WLC is a 2100 series and I have looked back and forth through the entire web interface. Originally the idea was that the gateway should be the DNS controler and the WLC pointed directly at the gateway. For some reason, random clients are having DNS specific issues when it comes to seeing certain shares around the network. The problems are also very intermittent. Aside from going to each box and implementing a static DNS is there ACTUALLY a DNS setting lodged into the WLC settings (and I am being a numpty and can't find them) or am I stuck with performing the config 1 by 1?

    Read the article

  • SOHO NETGEAR wireless router disconnects when downloading torrents

    - by Lirik
    I have a NETGEAR WGT624 router at home which dies when there is a heavy torrent load. I open up my torrent client and it downloads for about 5 to 10 minutes and it continues to increase the number of seeds (goes up to 70-80 seeds), but after that the router simply fails and I have to restart it in order to get an internet connection again. Is there any way that I can fix this? New router firmware? Change some router options? Feed it a cookie? Anything?

    Read the article

  • Rate limit a wireless interface

    - by Jamie Hankins
    I have access to my routers SSH and IPTables. I want to rate limit my guest network to 1Mb/s so they can't guzzle my bandwidth. rai1 RTWIFI SoftAP ESSID:"GuestNetwork" Nickname:"" Mode:Managed Channel=6 Access Point: :F9 Bit Rate=300 Mb/s wdsi0 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: :F8 Bit Rate=300 Mb/s wdsi1 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: :F9 Bit Rate=300 Mb/s wdsi2 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: Not-Associated Bit Rate:300 Mb/s wdsi3 RTWIFI SoftAP ESSID:"YouCan'tTouchThis" Nickname:"" Mode:Managed Channel=6 Access Point: Not-Associated Bit Rate:300 Mb/s I'm just wondering the command I need to limit it. I tried the iwconfig limit command but it failed. Thanks

    Read the article

  • Simple way to make wired internet wireless without router

    - by Anriëtte Combrink
    Hi there Is there any device which you can plug into an Ethernet port and then have it broadcast the internet connection it receives through Ethernet wirelessly with a set password (maybe a serial number on device itself)? The problem is, I have a Wi-fi capable device, an iPhone and I want to use the wired internet connection in a hotel room, but the iPhone needs a Wi-fi signal. How can I accomplish this with a rather simplistic device. // EDIT: Can this be achieved with an Apple Airport Express?

    Read the article

  • Wireless Password

    - by Campo
    I have a security policy question: I want to know how other admins handle the WIFI password in the office. Does everyone know it? Do you enter it in for the user or guest every time and keep it a secret. I am in camp 2. Just want to know what others do and their reasoning behind it.

    Read the article

  • HP Pavilion DV6 doesn't recognize wireless networks

    - by Mike N.
    Okay so about a few weeks after I got my laptop the wifi would connect and disconnect, off and on. And every time I troubleshoot it, a message comes up saying there's a network cable not properly plugged in or broken... It's been doing this for about a year and I usually just tap the bottom of the laptop or something and the wifi connects again but now it refuses to turn back on, how do I fix this?

    Read the article

  • channel interference in cisco wireless access points 1130ag

    - by baskaran
    hello all, i am working as a network admin . in our client company we are eabling more than 70 access point in these 5 are outdoor access points . in this outdoor access points i am getting channel interference is failed , i have changed the channel manually through wlc . at that time only i am getting passed ,after that again it will be failed . so wt should i do ,please help me.

    Read the article

  • sysctl.conf not running on boot

    - by Brian
    At what point is sysctl.conf supposed to be read during boot, and why might it not be running? I have the following settings which are not being applied when I reboot: net.bridge.bridge-nf-call-arptables = 0 net.bridge.bridge-nf-call-ip6tables = 0 net.bridge.bridge-nf-call-iptables = 0 net.bridge.bridge-nf-filter-pppoe-tagged = 0 net.bridge.bridge-nf-filter-vlan-tagged = 0 fs.nfs.nlm_udpport = 32768 fs.nfs.nlm_tcpport = 32768 The first section is needed for KVM bridging, and the second is to run the NFS lock manager on a known port. However, after booting, these values have not taken effect. If I run sysctl -p, then they do. This wouldn't be a huge issue, except that I can't figure out how to restart the lock manager without rebooting. I would really like to know why sysctl.conf isn't working at boot, but I'd settle for just being able to restart the lock manager. This is on Ubuntu server 10.04.2, kernel 2.6.32-31-server. I know some daemons check the permissions on their config files and refuse to work if they're too permissive, but sysctl.conf is 644 root:root, which I'm pretty sure is the default.

    Read the article

  • European wireless data

    - by drewk
    I am on my way to Europe for 20 days with the wife and teenage kids. Among us, we have 3 iPhones, 1 Blackberry, 2 iPad 3G and 2 Macbook Pro laptops. Each has Skype. I am very concerned about AT&T data charges, and I am looking for a sensible alternative. For example, the AT&T data plans for the phones and iPads are $200 EACH for 200 MB per device. That is $1,200 and does not even cover the laptops. Ouch!!! I am thinking about a prepaid data plan from a European cell system of some sort combined with a GSM data modem and a Cradlepoint router, such as the CTR500. So, questions: 1) Anyone know of a GSM data source in Europe where I can buy a GSM Modem compatible with the CTR500 at a reasonable prepaid rate? 2) Experience with the CTR500?

    Read the article

  • Ruckus wireless AP and Dell PowerConnect configuration problems

    - by DanielJay
    We are working on trying to get some Ruckus Access Points to work correctly on our network. Currently our network is as follows: VLAN 10 - Servers VLAN 11 – Computers/DHCP VLAN 12 – Voice VLAN 13 – Guest We use Dell PowerConnect 6248P switches for our switches. Port settings are as follows: ZoneDirector 1100 is plugged into this port. Should be accessing the server VLAN and then allowing all other traffic. interface ethernet 1/g2 classofservice trust ip-dscp description 'Ruckus ZoneDirector 1100' switchport mode general switchport general pvid 10 switchport general allowed vlan add 10 switchport general allowed vlan add 11-13 tagged exit Access point is plugged into this port. The port has to be on VLAN 11 in order to get DHCP. interface ethernet 1/g16 classofservice trust ip-dscp description 'Ruckus - IT' switchport mode general switchport general pvid 11 switchport general allowed vlan add 10-12 switchport general allowed vlan add 13 tagged exit If we tag the traffic from the SSID as VLAN 11 data fails. If we leave the SSID tagged as 1 the data flows correctly. Are there problems with passing tagged traffic to untagged ports? We are looking to see what we can do to get the SSID tagged as 11 instead of 1. Any suggestions?

    Read the article

  • Windows 7 - wireless connection sharing

    - by Chris Ballance
    I am trying to share my mobile broadband internet connection with other machines via wifi and am running windows 7. Users are able to connect to my machine, but not able to obtain an internet connection once they connect to me. Any ideas would be very helpful. Does Windows firewall block this?

    Read the article

  • linksys wap54g default wpa wireless key?

    - by jack
    Hi I wrongly pressed the push button in linksys wap54g web administration. Then it restarted and stated that it's protected with WPA while I first configured it as WEP. So, my old key didn't work. What should I do? Plugin with wire cable to reconfigure it? - which is the only way? coz it was embedded in ceiling. I found no solutions in product manual and google. Thank you.

    Read the article

  • Can't connect Alienware M11x wireless to internet thru families router

    - by Jim Kron
    Morning All, Have an Alienware M11x loaded with Win 7 Premium with the Dell half card wifi. Also have a Netgear and Belkin USB external adapters (b/g and N to include dual radios. No joy either. Families Internet is served thru Charter and they use a Motorola Router. No matter if we reset the router, I cannot connect to the Net but can talk to the router. BTW... my brother only uses WEP as a number of connected items are old and my folks are not in a high threat area for attacks. Frustrated, as I know what I'm doing but this really has me stumped. Any thoughts? Much appreciated, Jim

    Read the article

  • Some notebooks can connect to internet via certain wireless router, some can't

    - by Nathaniel
    I take a class in the building of a business and we sometimes use their internet via Wi-Fi. In the last few weeks, though, some notebooks haven't been able to connect to the internet even though they are connected to the router. It affected first a few of us and then all of us. Last week I tweaked around the network settings on the router (yes, the admin password is the same as the network key) and even moved the internet cable on the router from port 1 to the internet port. None of this really worked so I put things more or less back as I found them and alerted someone that someone who knew more than me had better have a look at the router. So, I don't know if anybody has had a look at it but now 2 of us can again connect to the internet. I had a look at the router settings last week and I really couldn't see what might be creating this issue. What might be the problem?

    Read the article

  • Windows 7 can't see wireless printer

    - by Chance Robertson
    I have a P1102W printer from HP. I have a Windows 7 machine. I have a MacBook Pro. I setup the printer following the instructions from the Windows 7 machine. I am able to print from the Mac but not the Windows 7 machine. And to add, I am not able to print from any Windows 7 machines. The MacBook Pro address is 198.168.2.115, the Windows machine is 192.168.2.117, and the printer in 192.168.2.140. I can ping the printer from the Mac. I can ping the Windows 7 machine from the mac. I can ping the mac from the windows 7 machine. When I try to ping the printer from the Windows 7 machine I get destination unreachable. I can browse to the printer IP address from the mac and not the Windows 7. I have turned off the firewall on the Windows 7 machine and turned on network sharing. Is there something else I am missing. I can connect the printer with a USB cable to the Windows machine and print. I can not get the Windows machine to see the printer even though they are on the same network.

    Read the article

  • graphic error on console

    - by Christian Elsner
    I have Linux on an embedded system. There is no graphic system, but I still have graphic errors. For example, if I type: ifconfig eth2 hw ether 00:0e:8c:d0:59:d2 I see: ifconfig eth hw ether 00:0e:8:2:2 If I type Enter, it accepts the command I typed, so it's just a matter of displaying. Everything is fine, when I log in via SSH. Anyone any ideas, what could be the cause or where to look at? Output of lspci: 00:00.0 Host bridge: Intel Corporation 3100 Chipset Memory I/O Controller Hub 00:00.1 Unassigned class [ff00]: Intel Corporation 3100 DRAM Controller Error Reporting Registers 00:01.0 System peripheral: Intel Corporation 3100 Chipset Enhanced DMA Controller 00:02.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A 00:03.0 PCI bridge: Intel Corporation 3100 Chipset PCI Express Port A1 00:1c.0 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 1 (rev 01) 00:1c.1 PCI bridge: Intel Corporation 631xESB/632xESB/3100 Chipset PCI Express Root Port 2 (rev 01) 00:1d.0 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #1 (rev 01) 00:1d.1 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset UHCI USB Controller #2 (rev 01) 00:1d.7 USB Controller: Intel Corporation 631xESB/632xESB/3100 Chipset EHCI USB2 Controller (rev 01) 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c9) 00:1f.0 ISA bridge: Intel Corporation 631xESB/632xESB/3100 Chipset LPC Interface Controller (rev 01) 00:1f.2 IDE interface: Intel Corporation 631xESB/632xESB/3100 Chipset SATA IDE Controller (rev 01) 00:1f.3 SMBus: Intel Corporation 631xESB/632xESB/3100 Chipset SMBus Controller (rev 01) 02:00.0 Ethernet controller: Intel Corporation 82574L Gigabit Network Connection 03:01.0 Network controller: Siemens Nixdorf AG Device 4003 (rev 02) 03:01.1 Unassigned class [ff00]: Siemens Nixdorf AG Device 4003 (rev 02) 03:02.0 Ethernet controller: Siemens Nixdorf AG Device 4047 (rev 01) 03:03.0 Ethernet controller: National Semiconductor Corporation DP83815 (MacPhyter) Ethernet Controller 03:04.0 Unassigned class [ff00]: Siemens Nixdorf AG Device 4057 (rev 01) 04:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 05:00.0 Ethernet controller: Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE] (rev 44) 06:00.0 PCI bridge: Texas Instruments XIO2000(A)/XIO2200(A) PCI Express-to-PCI Bridge (rev 03) 07:00.0 VGA compatible controller: Silicon Motion, Inc. SM720 Lynx3DM (rev c1) 07:01.0 USB Controller: NEC Corporation USB (rev 43) 07:01.1 USB Controller: NEC Corporation USB (rev 43) 07:01.2 USB Controller: NEC Corporation USB 2.0 (rev 04) The whole thing is running on an Intel Core 2 Duo U2500

    Read the article

  • Is it possible to change the default scan folder on an Eye-Fi Wireless SD Card

    - by MichaelPh
    By default Eye-Fi cards scan the DCIM folder (and subfolders) used by most digital cameras for new images to upload. Is there a way of changing this to a different folder? In my particular case I'm using a Kodak photo scanner (P461) that uses a PHOTO(N) folder format to store the scanned images, as far as I know the device has no configuration interface to alter this setting so that doesn't seem to be an option. This topic on the Eye-Fi forums is the closest I've come to a solution, but a perfunctory investigation of Disk Probe doesn't make it obvious what needs to be modified on the card.

    Read the article

  • Wireless router setup for 1-1 NAT

    - by Carlos
    What I have: A linksys router WAG160N with firmware version 2 A "pool" of 5 external static IP's provided by my ISP 213.xx.xxx.n All the required configuration values for the static IPs such as (Subnet Mask, Gateway and static DNS 1, 2, 3) Current WAN Configuration: Encapsulation: RFC 2364 PPPoA Multiplexing: VC QoS type: UBR DSL modulation: MultiMode What's connected to the network: 1 x Server (That I want to make available to the outside) 5 x Desktops with static internal IP's, such as 192.168.0.xx 2 x Network printers, also with internal static IP's 2 x Laptops 1 x NAS (Network Attached Storage) also on static IP What I want to do: I would like to make the server available from outside the network, for example from your house. The problem is that Im not really sure how to do this. I have tried following the steps on the instruction manual in Linksys but they do not seem to work, once I set it up as shown bellow, I loose internet and all hell breaks loose. Going into further detail, I would prefer if the network is changed as little as possible, by this I mean that all the computers stay networked within eachother and only the server is accessible from the outside the network. What I need HELP with: I have read around that it is possible to set a 1-1 NAT (I know where it is in the menu but have no clue what it does...) so that I can NAT a single public IP directly to a single private IP (in our case the server). But please, How do I do that? Or maybe an alternative?

    Read the article

  • Mouse works fine but keyboard (not wireless) not responding to anything

    - by Christine Boeke
    I read previous questions like mine and looked to see if keys were depressed and checked to make sure the mouse key was off in the system preferences. The mouse works just fine but the keyboard seems to be dead. I plugged in another keyboard and it responded identically. Is it something in the Desktop itself? Could I need a technician? I have searched for answers on line and had no success. Thanks!

    Read the article

  • wireless router - configuring for low-latency, high traffic environment

    - by Mark C
    Hey all, I have a few questions about configuring a router to achieve low-latency, high speed throughput on a local area network that is not connected to the internet. I've read up on some stuff, but thought I would solicit some opinions here on what I've found and what I want to know.... Turn off SSID broadcast - it produces extraneous packets that all clients receive and reply (?) to. Not a huge deal, but it may help a bit. Mixed-mode off - I should attempt to have all devices using the same standard (e.g. 802.11n) and turn mixed-mode off. Any thoughts on security? Does having WEP or any of the WPA variants actually increase latency? Nothing super secure is going over this LAN so if turning security off made things better, that'd be cool. Any other thoughts or things to focus on to create the low latency environment I'm trying to go for would be great. Links to webpages and papers are also cool. I'm open to go through a bunch of stuff. Thanks in advance!

    Read the article

  • Wireless Access Point stopped working

    - by Alex Pritchard
    I have a simple LAN set up at home using a Linksys WRT54GSV4 as my primary router and an Encore ENHWI-2AN3 as an access point. I connect the Encore to the Linksys by running a cable from one of the Linksys LAN ports into the Encore WAN input. I originally configured this using the Encore setup wizard, setting the device up in AP Router Mode. It detected the input network and worked about as expected, creating a second network that used my primary network to connect to the internet. It worked fine for about 2 weeks, then abruptly cut out today. I checked to make sure the network was still live through the cable going into the Encore (provides internet when connected to a laptop directly) and that devices are still able to connect to the network being broadcast by the Encore. When I try to rerun the connection wizard on the Encore, I receive the message "No Services found in WAN port." The WAN Settings is no longer retrieving a dynamic ip from the line. I tried providing a static IP, assigning an IP address within the subnet range of my primary router that wasn't being used and pointing the Default Gateway to the Linksys IP, but this did not work either. When I plug the cable into the WAN port, an internet light comes on that is not lit when a live network is not connected. I've tried doing a hard reset on the Encore (held down the rest button until the lights flashed, reconfigured from scratch), but the WAN settings are still not detected. Also tried powering off and on the modem, linksys, and encore. Any suggestions would be appreciated!

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >