Search Results

Search found 4248 results on 170 pages for 'adsl router'.

Page 9/170 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• How to connect to internet 2 or more pcs with an usb wifi adapter

  - by bhaoahd

  In one pc I have an USB Wifi adapter (Realtek RTL8187L Chipset), from there a 10 meters cable to an outdoor antenna. With that I connect to a public Access Point. Now I want to be able to connect more computers to internet using that same connection that comes from the outdoor antenna, what options do I have to do this? I do have another usb wifi adapter with a small omni antenna, and a router encore ENHWI-G/A. This router can be used as a Wifi AP, but it needs a modem that works with the RJ45 connector. Is there a way I could take internet from the outdoor antenna, and create another AP indoor using that router to "repeat" that wifi that comes from the outdoor antenna? If creating this second AP is not possible, should I use some sort of local network between computers, connect my main PC with the outdoor antenna, and share the connection through the lan? (I would really prefer to have a second AP indoor so I can connect other devices like a Palm, but I am not sure how could this be possible with this router and the usb wifi adapter)

  Read the article

• Why is my router not routing?

  - by dwj

  Starting a week and half ago my router stopped working with my cable modem. I went to sleep with it working and woke up with it not. I swapped in another router and am still having issues; I was gone for 10 days so now I'm back to trying to figure it out. While I was gone I left everything (cable modem, router, and computer) powered off. My setup: Comcast Ambit cable modem (from Comcast) Netgear WGR614 v4 router -- replaced with Linksys WRT54GS v1.1 Windows XP SP3 other computers, all currently unplugged The modem is using the firmware (ver 2.105.2001) provided by Comcast; hardware version 1.3 The Linksys router is using FW ver 4.71.4 (latest for this release of HW), factory defaults I am only using the wired connections; no wireless. I have swapped out all of the cat5 cable. If I plug my computer directly into the cable modem, I can ping by name or number. Everything works perfectly. If I plug my computer into the router and the router into the modem, I cannot access anything outside of my local network. This is the exact setup I've used for the past 5 years; there were no changes in the past year. Now here's the interesting part: I can log into the Linksys router and get status information from it; everything appears good. Using the Diagnostics, I can run ping and traceroute to any site on the internet. These work perfectly. From my computer, I can ping the router and the modem. However, I cannot ping anything on the internet by with name or number. If I plug in another computer, I can ping it successfully. I've included two transcripts below that show these two attempts. Addresses, DNS, gateways, etc. look good. I cannot access the internet through either router. I am at a loss here. Suggestions? Help! Computer to Router to Cable Modem C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:21:55 PM Lease Expires . . . . . . . . . . : Tuesday, March 23, 2010 10:21:55 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Ping request could not find host google.com. Please check the name and try again . C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Request timed out. Request timed out. Request timed out. Request timed out. Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 0, Lost = 4 (100% loss), C:\ Computer to Cable Modem Directly C:\ipconfig /renew Windows IP Configuration No operation can be performed on Bluetooth Network while it has its media disconnected. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected C:\ipconfig /all Windows IP Configuration Host Name . . . . . . . . . . . . : wynton Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Unknown IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : hsd1.ca.comcast.net. Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . : hsd1.ca.comcast.net. Description . . . . . . . . . . . : Intel(R) 82562V-2 10/100 Network Connection Physical Address. . . . . . . . . : 00-1D-09-9B-45-EB Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 71.204.149.195 Subnet Mask . . . . . . . . . . . : 255.255.252.0 Default Gateway . . . . . . . . . : 71.204.148.1 DHCP Server . . . . . . . . . . . : 68.87.76.10 DNS Servers . . . . . . . . . . . : 68.87.76.178 68.87.78.130 Lease Obtained. . . . . . . . . . : Monday, March 22, 2010 10:18:50 PM Lease Expires . . . . . . . . . . : Monday, March 22, 2010 11:12:31 PM Ethernet adapter Bluetooth Network: Media State . . . . . . . . . . . : Media disconnected Description . . . . . . . . . . . : Bluetooth LAN Access Server Driver Physical Address. . . . . . . . . : 00-0A-3A-6F-68-41 C:\ping google.com Pinging google.com [74.125.19.99] with 32 bytes of data: Reply from 74.125.19.99: bytes=32 time=20ms TTL=55 Reply from 74.125.19.99: bytes=32 time=17ms TTL=55 Reply from 74.125.19.99: bytes=32 time=28ms TTL=55 Reply from 74.125.19.99: bytes=32 time=18ms TTL=55 Ping statistics for 74.125.19.99: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 17ms, Maximum = 28ms, Average = 20ms C:\ping 74.125.19.104 Pinging 74.125.19.104 with 32 bytes of data: Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=18ms TTL=55 Reply from 74.125.19.104: bytes=32 time=17ms TTL=55 Reply from 74.125.19.104: bytes=32 time=16ms TTL=55 Ping statistics for 74.125.19.104: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss), Approximate round trip times in milli-seconds: Minimum = 16ms, Maximum = 18ms, Average = 17ms C:\

  Read the article

• Is there a switch that will connect directly to my modem and allow my router to serve only as a WiFi connection?

  - by Abner

  Details . . Devices . Internets -50Mbps Cable Internet Modem - Motorola Surfboard Extreme Router - Netgear WNDR3700v3 Switch - D-Link DGS-1008G Wired Ethernet Cable - Cat6_24Awg_ Device Configuration - Modem\Router\Switch . . Internet Usage . Wired Demand XBOX 360 1 Gaming PC 2 PC - HD video . WiFi Demand 3 android + 1 Laptop for browsing and group video chat simultaneously . . Specifics . I am experiencing problems with network speeds and reliability on both wired and wireless connections. On many occasions I experience WiFi Speeds that vary between the 15mbps to 0.50 mbs (or less) and ping ranging from 15ms to 500ms. These results are from when I notice problems with internet lag and run speedtest.net to get details of problems. I have a stretched out floor-plan and old building materials drastically affecting my cellphone signal strength as well). After Reading the "Known Issues" Section on the webpage below http://www.dd-wrt.com/wiki/index.php/Netgear_WNDR3700#Known_Issues I bought the switch and Cat6 cable to increase speed and relieve stress on router in an attempt to fix the symptoms. I thought I'd use the router in a Modem\Switch\Router configuration. I thought I'd only have to use the router for mobile WiFi connections like android or Laptops when necessary (hopefully eliminating the problem caused by the router when subjected to all those demanding Ethernet connections) When I started unboxing the switch, I noticed the manual of this DGS-1008G shows it being connected in the Modem\Router\Switch order and not in the Modem\Switch\Router configuration I was aiming for. I have not been able to find a solid plan to remedy my specific problem without buying another expensive router. I would like to get the speeds I am paying for without buying another router. (My WiFi Adapters would also need to be updated if new router is required, meaning more $$$). I can always sell the switch and get a better one that will bypass the router because my most demanding internet connections are Wired. . . Questions Can I accomplish a Modem\Switch\Router configuration with current switch? Is there a different way to get the wired speed I need while providing WiFi only when necessary? . .

  Read the article

• PPPoA Half Bridge Modems

  - by petebob796

  I am looking for a simple ADSL ethernet modem to plug into a DIR-825 router. Anyone know of one, it's for a PPPoA connection so I believe I need something capable of half bridge/zipb.

  Read the article

• Port forwarding for VNC on Dynalink RTA1335 not working

  - by Curyous

  I've vnc-java running on an Ubuntu box, with the IP address 192.168.1.68, using port 5800 (because port 5900 is being used for normal VNC). If I connect to 192.168.1.68:5800 using another computer on the network, I can use VNC fine. Using www.whatismyip.com, I find out what my IP address from the outside world is, and if I go directly to that, I get to access my modem/router. If I try to navigate to that IP address, with ':5800' on the end, I get a "This web page is not available." error. I have port forwarding set up in the router as follows: Application Name External Packet Internal Host IP Address Protocol Port IP Address Port VNC ALL TCP/UDP 5800 192.168.1.68 5800 What else do I need to do to get this to work?

  Read the article

• Local DNS server (bind) and the router DHCP

  - by Luca

  I just set up an internal http server for internal use (I set up Redmine), in a small network (30 or so PCs). I set up the http server on a virtual box ubuntu, that runs also the DNS server (bind). In the DNS lookup I added the Redmine server name (redmine.engserver <- 192.168.1.14) and as forwarders the outside ISP DNS IP adresses. I am using a small wi-fi router (ASUS RT-N66U) as DHCP (and as gateway). In the DHCP config page I set up as DNS the ubuntu server IP (it is fixed 192.168.1.14). Now when I connect a new PC to the network, the DHCP router issues its new IP and as DNS servers it issues: primary: 192.168.1.14 (ubuntu machine) and seconary 192.168.1.1 (the router itself). ipconfig /all Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DHCPv6 IAID . . . . . . . . . . . : 248539109 DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-17-15-AA-3F-D0-67-E5-49-A7-EF DNS Servers . . . . . . . . . . . : 192.168.1.14 192.168.1.1 NetBIOS over Tcpip. . . . . . . . : Enabled Before changing the DHCP setting on the router, I would always get only one DNS server: 192.168.1.1 (which uses probably DNS forwarding to external public DNS services). The problem is this: If in my browser I type www.google.com, it works all the time. If in the browser I type http://redmine.engserver/ it works most of the time, but sometimes it ends up with a yahoo page search or something else. In the DNS cache it shows as (Server not found). ipconfig /displaydns I looked with wireshark and it seems like sometimes the client PC interrogates the secondary DNS (192.168.1.1) instead of the first 192.168.1.14. Obviously this one is a public domain and it does not have the redmine.engserver entry. What is wrong in this configuration? Is it even legitimate to have 2 DNS (one internal and one forwarded by the router) which are inconsistent? Is there another way to have a local name service in a small office network? Why is the router DHCP issuing itself as DNS?

  Read the article

• Avoiding double NAT with PPPoA connection

  - by user498429

  I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

  Read the article

• DSL Modem with Wireless Router

  - by David

  I have a D-Link WBR-1310 wireless router and a TP-Link TD-8616 DSL modem. My old DSL modem died recently and I got the TP-Link as a replacement. With my old DSL modem, I plugged it into the WAN port on my D-Link and I could reach the internet through wireless and through the network. However, when I plugged the new TP-Link into the WAN port, I was not able to get any internet connectivity (either on the network ports or through wireless). So I plugged my labtop directly into the TP-Link DSL modem and I was able to get internet connectivity. I'm trying to figure out why my labtop can see the internet connection, but not the D-Link router. I think that the problem is due to the IP networking. My D-Link was originally set to have IP address 192.168.1.1. According to the documentation for the TP-Link DSL modem, it uses 192.168.1.1 as its IP address. I do not believe that my old DSL modem had an IP address. I logged into my D-Link router and changed its IP address to 192.168.1.2 and restarted it. Unfortunately, I still could not see the internet from my wireless devices. I've read a few forum postings which implied that I needed to setup a "bridge" between the two networks. Does that sound correct? Why didn't my old DSL modem require a bridge? I read pg. 12-13 of my D-Link's manual and they suggest that I need to disable UPnP, DHCP, and then plug the DSL modem into one of the LAN ports on my router. I'm concerned about doing this since I don't think that the firewall will work if I plug my DSL modem into one of the LAN ports. I also have a home NAS on my network and I wouldn't want that to be available over the internet. Does anyone have any advice about how I can get my TPLink DSL modem to work with my D-Link router? Thanks!

  Read the article

• Intermittent internet access on a flat network - Router is connected

  - by Naveed

  I’m looking for some help with network settings. I’ve just started a new job (non-IT!) and we have problems with our office network. I’m the most IT literate in the organisation (15 permanent employees) and so have been dealing with IT issues. Our main bit of software is web-based so we need constant web access but it sometimes goes down for between 20 minutes and 3 hours despite everything seemingly working fine. It’s a flat network with wireless APs, BT Business Broadband 8Mbit connection and that’s about it. We have no servers and no standard settings and staff are encouraged to bring in their own laptops and connect! The network basically exists to provide internet access and that’s it. We also have students accessing the wireless (and I know there’s a whole list of access and content issues etc but right now we just need internet access stabilised). This is what we have: Building 1 Cisco SLM-224P 24-port PoE 10/100 switch with 2 gigabit ports 3 x ZyXEL NWA-3160 wireless APs Samsung OfficeServ 7100 phone server which borrows the building’s wiring Building 2 Netgear GS605-UK 5-port 10/100/1000 switch 1 x ZyXEL NWA-3160 wireless AP 1 x BT Business Hub – 2wire BT2700hgv – is the DHCP server We have 2 link cables between the buildings. One connects the two switches on a gigabit port. The second (oddly) connects the switch in building 2 to the OfficeServ server in building 1. When the internet goes down I can still access the router through a wireless connection. I can also ping websites and get a response. Firefox just says “Cannot connect” etc. The system then heals itself when it feels like it. (Sorry if this is asking too much but) These are my immediate questions… Why would browser-based internet go down? I don’t know enough about protocols etc but I can try to standardise settings. The WAPs have a DNS server setting and I don’t know whether it should be “None” or “From DHCP”. What should be the DHCP server? The router or the Cisco switch? Or something else?! Would there be any problem in connecting the second link from switch to switch? Is that good practice? Is it worth swapping the Netgear GS605 with either a Cisco SG200-08 or Netgear GS108T-200? Is it worth upgrading the router to, for instance, a Cisco RV042G Dual Gigabit router which would also act as a switch? Or is it better to have a separate router and switch in Building 2?

  Read the article

• DLINK WBR-1310B Wireless Router seems to hang...

  - by Ira Baxter

  I have a brand new DLINK-1310B Wireless Router (box never before opened, although I bought it at the neighborhood computer junk store). I am using it at home (and in fact am using it at this instant from a wireless laptop). When operative, I can ping it at 192.168.0.1, and I can log into it from the PC attached to it by LAN and from the wireless PC at //192.168.0.1. In the course of the day since I've installed, it seems to have locked up 3 times. Each time the symptoms are my web browser (or other IP service, e.g., POP3) stops with a "No internet connection" error. Attempts to contact the router via 192.168.0.1 get no reaction, from either the wireless laptop or from the hardwired PC sitting next to it. It doesn't respond to pings to that address either. Power cycling the router fixes it. I've seen discussion in other questions about aging cheap electronics. Its too new to be aged. Anybody else seen this behavior with a DLINK-1310? Or do I just need to exchange it for another and try again? (I hate rolling dice, I bought the DLINK because a previous Linksys died of apparant heating problems, how many do I have to cycle through before I get something that works and is long-term stable?). Remarkably, nobody talks about how much software is in a router. Is the stuff just buggy? EDIT: Happened again, while I was working on the wireless Vista laptop. (Seems like once an hour?) I was a little more careful this time. The wireless laptop can ping it. It can't get the login screen. I visited the LAN-connected PC (takes me a minute to walk from the laptop to the PC at the other end of the house), and attempted to visit a random web page. Surprise, that worked! And, now, after a minute walking back to the laptop, I can reconnect the wireless laptop, and get to the login page from it. Strange the time/date has been reset back to 2002. (I'll swear I set it and saved the system configuration after updating the firmware; it made me redo every other bit of reconfiguration again). Is there something funny about wireless leases expiring? The router says the leases it is handing out are good for 180 minutes, and the delay-to-inaccessible was only about an hour. The DSL connection seems to have a 10 minute lease.

  Read the article

• ADSL to T1, Is it worth it for us?

  - by Jack Hickerson

  The company I work for has roughly 45-55 simultaneous users (local and remote/VPN) logged in at a given time. We currently subscribe to an ADSL connection but we have been experiencing slower upload/download speeds as our number of users increase. So, I have a few questions with regards to upgrading our connection to a t1 line. I am aware that the number of channels on a t1 line are much greater then that of our current ADSL connection, but I have heard that the number of active users on a t1 line should be no greater than ~30 for optimal performance. I would think this statement is dependent on what each user was using the connection for and could change depending on this variable. That being said, I have tried to break down how the line would be used in our organization based on our major departments: Sales (~60% of total users) - Everyday surfing, email, research, occasional streaming media Marketing (~15% of total users) - Heavy reliance on uploading/downloading, streaming media, file sharing Other (~25% of total users) - email, rare use of any connection intensive activities. I have considered keeping the ADSL for our local users and dedicating the t1 to our remote users (or vice versa) but the cost is significantly higher then what we had hoped for. All factors being equal (# of users, frequency of downloads/uploads from our current activities) Would you suspect a significant performance increase in making the transition to a t1 line from our current ADSL line? What are your thoughts or recommendations?

  Read the article

• Can't access server on LAN new Router

  - by RMDan

  Earlier this week my roommates decided to change the router we are using for our home network. On the old router I had no problems accessing a laptop running Mint Linux over the network(SSH, FTP, and Shared Folders). However I am now not able to connect. I have verified the IP address of my Linux machine has not changed and I have no problems connecting to our NAS(WDMYCLOUD). The new router is a D-Link DIR-868L. PuTTY is giving me a Timed Out error(was giving me a EHOSTUNREACH before). Running Windows 8.1 the connecting laptop, but tried connecting using my phone via SSH did not work either. More information: Can ping the Linux machine from the router but not my computer. Pinging 192.168.0.111 with 32 bytes of data: Reply from 192.168.0.102: Destination host unreachable. Reply from 192.168.0.102: Destination host unreachable. Reply from 192.168.0.102: Destination host unreachable. Reply from 192.168.0.102: Destination host unreachable. Ping statistics for 192.168.0.111: Packets: Sent = 4, Received = 4, Lost = 0 (0% loss),

  Read the article

• Unable to connect to FTP server using Filezilla with router in-between

  - by pkswatch

  While connecting to my web server using filezilla, i am getting this error: Status: Resolving address of ftp.mysite.org.in Status: Connecting to 199.199.199.18:21... Status: Connection established, waiting for welcome message... Response: 220---------- Welcome to Pure-FTPd [privsep] [TLS] ---------- Response: 220-You are user number 1 of 150 allowed. Response: 220-Local time is now 17:58. Server port: 21. Response: 220-This is a private system - No anonymous login Response: 220-IPv6 connections are also welcome on this server. Response: 220 You will be disconnected after 5 minutes of inactivity. Command: AUTH TLS Response: 234 AUTH TLS OK. Status: Initializing TLS... Error: GnuTLS error -9: A TLS packet with unexpected length was received. Status: Server did not properly shut down TLS connection Error: Could not connect to server I use a cradlepoint CTR35 wifi router to connect to the wired internet connection. When i connect to the same server without this router, the connection works flawlessly. So i guess there is some problem with my router firewall settings, but i dont know what! Can somebody help me out please? Note: The server requires EXPLICIT FTP OVER TLS and does not work with plain FTP sessions. And i can connect to other servers using plain FTP with the router in between.

  Read the article

• Squid with mikrotik router

  - by niren

  I tried to connect squid3 in my network to use high anonymity proxy. This is how my network is right now WAN LINK | ------------- ----------------------------- | Mikrotik Box | | Ubuntu Server with squid3 | ------------- ----------------------------- | / | / ---------------------- | Switch ( Cheap one ) | ---------------------- | | | Client1 Client2 Client3 etc. after this setup I changed squid.conf in Ubuntu server as http_port 8080 acl localhost src xxx.xxx.xxx.xxx(Ubuntu server IP) acl to_localhost dst xxx.xxx.xxx.xxx(Mikrotik router gateway) I assume that redirected http from Mikrotik router will be redirect again to Mikrotik router. uncomment access log /var/log/squid3/access.log add visible_hostname myname save squid.conf and restart squid3 server. Then I have added nat rule in Mikrotik router ip/firewall/nat 1. add chain=dstnat src_address=xxx.xxx.xxx.xxx(ununtu server IP) dst-port=80 protocol=tcp action=accept 2. add chain=dstnat src_address=xxx.xxx.xxx.xxx/28(LAN address) dst-port=80 protocol=tcp action=dst-nat to-address=xxx.xxx.xxx.xxx(ununtu server IP) to-port=8080 now I can not able to access internet from client1 system, If I remove these two nat rule then I can access internet. what is wrong I have made?

  Read the article

• Wireless router that supports Bonjour between wire- and wireless- connected machines

  - by cefstat

  At home I have an ADSL modem that I use also as router. For the record, it is a DavoLink DV-2020 provided by Tele2 in the Netherlands. It turns out that if a computer is connected with a cable to the router and another computer is connected wirelessly, then they cannot see each other's services that are advertised through Bonjour (Apple's service discovery protocol, an implementation of Zeroconf). The combinations wired/wired and wireless/wireless work fine. This means that somehow wire- and wireless- connected machines are on different physical networks although their IPs are in the same range (192.168.1.*). The modem in question doesn't provide many options that I could play with. So, I was thinking of buying a second router to connect to the modem, and then connect all my machines to this second router. The problem is that I am afraid that I will have again the same problem. I am looking for suggestions on routers that offer the functionality I want (Bonjour between wired and wireless connections). I suppose that one solution would be Apple's Airport Extreme Base Station but at 160€ it is ridiculously expensive. Any other options out there? And why is it so difficult to find in the technical characteristics if wired and wireless connections are on the same physical network?

  Read the article

• Terrible ping time with TP-Link wireless router

  - by rabbid

  I am literally a foot away from this useless TL-WR340G/TL-WR340GD router and check out this ping time: 64 bytes from 192.168.1.8: icmp_seq=291 ttl=64 time=9477.516 ms 64 bytes from 192.168.1.8: icmp_seq=292 ttl=64 time=8954.423 ms 64 bytes from 192.168.1.8: icmp_seq=293 ttl=64 time=8262.836 ms 64 bytes from 192.168.1.8: icmp_seq=294 ttl=64 time=7937.853 ms 64 bytes from 192.168.1.8: icmp_seq=295 ttl=64 time=7517.768 ms 64 bytes from 192.168.1.8: icmp_seq=296 ttl=64 time=7106.063 ms 64 bytes from 192.168.1.8: icmp_seq=297 ttl=64 time=6492.109 ms 64 bytes from 192.168.1.8: icmp_seq=298 ttl=64 time=5835.305 ms 64 bytes from 192.168.1.8: icmp_seq=299 ttl=64 time=5314.897 ms 64 bytes from 192.168.1.8: icmp_seq=300 ttl=64 time=4902.705 ms 64 bytes from 192.168.1.8: icmp_seq=301 ttl=64 time=4716.959 ms 64 bytes from 192.168.1.8: icmp_seq=302 ttl=64 time=5224.450 ms 64 bytes from 192.168.1.8: icmp_seq=303 ttl=64 time=5024.079 ms 64 bytes from 192.168.1.8: icmp_seq=304 ttl=64 time=5044.100 ms 64 bytes from 192.168.1.8: icmp_seq=305 ttl=64 time=4477.990 ms 64 bytes from 192.168.1.8: icmp_seq=306 ttl=64 time=3582.432 ms 64 bytes from 192.168.1.8: icmp_seq=307 ttl=64 time=2911.896 ms At this time mine is the only computer using the router. This happens from time to time. I'd restart the router, and then it'll have a 1-2 ms ping for a while, and then back to terrible ping. Is it just a poor quality router? Suggestions? Thank you

  Read the article

• New router, slower internet connection?

  - by qwerty

  So, we just bought a new router a few hours ago, and it does work. However, for some reason the speed is just ridiculously slow (compared to before, at least)! If i run a test on speedtest.net i get the following results: http://i.imgur.com/68JyH.png which are pretty good. But for some reason it's like the connection just "hangs" for a second when i navigate to a site through the browser (have tried different browsers). It's not on all sites, it kind of happens randomly. I think the browser cache might be speeding some sites up, because if i visit a site that i HAVEN'T visited before (since i cleared my cache), it takes like two seconds (if not more) to open the site. If i have visited it, it opens directly (it barely loads). Not sure what to do, really. Any suggestions on what might speed it up? Any settings i can play with in the router settings? The router is of the brand Belkin. I'm not sure about the model though, it says "Belkin, Play Max Wireless Router" on the box? Thanks in advance! EDIT: Alright, it takes a lot more than two seconds. At least 3-4 depending on the site. Any suggestions?

  Read the article

• Edimax wireless router is not providing DNS services correctly

  - by Nathan Fellman

  I have an Edimax router that is set up to connect to the internet via L2TP on cable, and on the LAN side it's set up as a DHCP server. The DHCP server gives correct IP addresses, but it sets itself up as the DNS server. However, it doesn't provide the DNS service. I am sure that it's a problem with the router, because I have two computers on the network with the same problem. I see that on the WAN side it gets correct DNS addresses from the ISP, so I'd expect the router to either pass these addresses through to the DHCP clients, or to serve the DNS requests itself by forwarding them to the ISP's DNS. However, it apparently does neither, and there is no DNS. I switched from ADSL to cable last week. On ADSL it connected using PPPoE, and the DNS worked fine. What can be the problem here?

  Read the article

• I cannot stay logged in to a site with my router

  - by Luke101

  I have a D-Link home router and my isp is Time warner. When I try to login to any site it does not let me. The website does not keep me logged in when I navigate the pages. I have to keep loging in for every web page I see. When I connect my cable modem directly to my computer I am able to stay logged in. Any ideas here?

  Read the article

• Time Machine + Ubee Router?

  - by Charlie

  I can't for the life of me figure this out. I recently had TWC installed in my house, and wanted to disable the NAT and router functions of it. I have a Time Machine hooked up to it from LAN1 (on the Ubee) to the WAN port on the TM. The problems started occurring here. I figured the settings would be these: Ubee Configuration mode: Bridge DHCP: Off TM IPv4: 192.168.100.2 Subnet Mask: 255.255.255.0 Router Address: 192.168.100.1 DNS Servers: 8.8.8.8, 8.8.4.4 Router Mode: DHCP and NAT But using those settings, my TM says "Double NAT", so I have to change it all around to the default settings of the Ubee using NAT. This leads me to believe bridge mode doesn't actually turn off NAT...

  Read the article

• DD-WRT Router acting as a Switch and Wi-Fi AP

  - by dotnetchris

  Recently I upgraded to Comcast Business and their modem has a built-in router so I took off my DD-WRT router and moved to a location in my home where I needed more ports and Wi-Fi (preferably without running new Ethernet cables since it's 50-100 foot run through floor and ceilings). I have my network cable from my Comcast modem going into Port 1 of my DD-WRT router with Port 2 and 3 being networked PCs. I have DD-WRT setup as a DHCP forwarder with the firewall disabled. This lets my all of my devices access the network fine. Is the correct the way to do this? Or is this a less optimal solution and it should be done in a slightly different way?

  Read the article

• Dell Inspiron 1520 Intermittent connection to wireless router

  - by ChuckNevol

  I have two computers in my home which are connected to a wireless router and a wireless printer. One computer is a Del XPS and the other a Dell laptop Inspiron 1520. In recent weeks we noticed the Inspiron had difficulty maintaining connection to the wireless router - web pages would suddenly have to be reloaded, or the computer rebooted while the other computer, the XPS, had no problems on the same network. So we connected a hard wire line from the Inspiron to the Verizon supplied wireless router. Problems still exist. could it be a bad driver?

  Read the article

• Why did my Cisco router hang?

  - by Mike Pennington

  We have a Cisco 1841 in our storage IDF that was originally running a 12.4(1) IP-BASE image; I wanted to upgrade to an advancedservicesk9-mz image, but the flash did not have enough space, so I deleted the running image. Later I tried inserting a larger CF from a Catalyst4500, which crashed the 1841 router (now without a bootable image). Using another 1800 series router, I loaded the 12.4(25g) advancedservicesk9 image and verified the image checksums. I set the confreg to 0x2102 from rommon and booted the new image; however the 1841 now hangs indefinitely after printing the IOS export control banner. I have tried four other images, all with the same results. What is wrong with this router? UPDATE 1: I tried loading images from a FAT16-formatted USB, but this didn't work either. I also tried tftpdnld from rommon, but got a get_mac_address(): Search T_IDPROM_MACADDR (0xc3) failed Illegal MAC address. error and the file would not load.

  Read the article

• Unable to access router even though internet works

  - by Tom Kaufmann

  I had access to my router and my internet was also working fine, but I was trying to do a port forward of 80 to my local machine and in the process I made a mistake. I went into Remote Management and for port 80 there were a few options like LAN, WAN, All. I accidently clicked "all" and then clicked "Disable". The problem is that I am no more able to access my router using 192.168.1.1, although my internet works. If I do a ping 192.168.1.1 I am able to receive the response, but I am no longer able to browse the internet. How can I fix this issue? I am using a zyxel p-660hn-t1a router given by my ISP.

  Read the article

• DHCP lease time in DrayTek Vigor 2600 Plus

  - by Nelson Reis

  I'm having some problems with my ADSL router DrayTek Vigor 2600 Plus. After a few days and some people connecting to it, it stops assigning IP addresses to new people that tries to connect. I was hoping that reducing the DHCP lease time could improve something. Anyone knows how can I change that in this model? I was also looking for the user guide on the internet, but couldn't find it anywhere. It would be great if someone points me to the pdf.

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >