Search Results

Search found 3469 results on 139 pages for 'broken harddrive'.

Page 9/139 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Installing Intel Rapid Storage Drivers makes my eSATA Drives act weird

    - by Filip Ekberg
    I have a HP 8530w Elitebook this Laptop got an eSATA port which I want to plug my LaCie d2 Quadra V2 1TB harddrive into. It all works well on a fresh install of Windows 7 without the Intel Chipset drivers installed. However when I install the Intel Rapid Storage drivers or the Intel Matrix software my drive seems to "disconnect" when I use it to much. I have a lot of Virtual PC's on the drive and when I start them the disk somewhat disconnects. What could cause this?

    Read the article

  • Installing XP through USB-to-IDE/SATA connector?

    - by overtherainbow
    Hello To help someone reinstall a corrupt XP install on his IDE or SATA drive in a older desktop box (hence no Vista/W7), I was thinking of asking him to bring his harddrive and meet at Starbucks, and I would install a brand new XP by connecting it to my laptop, and booting it up with the XP install CD. If someone's already used a USB-to-IDE/SATA connector such as this one by Sabrent: Does the XP CD accept installing Windows to an external IDE/SATA through USB? Does USB 2.0 provide enough power to run an external IDE/SATA drive, or do I need to provide the drive with its own power (in which case, how?)? Thank you.

    Read the article

  • Appropriate USB enclosure to use with an Ultra ATA drive

    - by Topdown
    I have a friend with a broken iBook, but we wish to recover the hard disk. I haven't seen the drive itself, however the spec lists it as an "Ultra ATA drive". Could you please advise if this is 100% compatible with any standard USB IDE 2.5inch enclosure? Full spec: iBook 12" 1GHz(AP) 256MB DDR266 SDRAM built-in Keyboard/Mac OS X Bluetooth Module 40GB Ultra ATA drive Combo (DVD-ROM/CD-RW).

    Read the article

  • Outlook 2007 OST File Indexing and OneNote 2007 Indexing are Broken

    - by Matt
    I'm running Outlook 2007 under Windows 7 Home Premium RTM. My OST file was previously being properly indexed but eventually searches significantly slowed down so I suspected a problem. Searching and indexing appears broken in OneNote 2007 as well as search time is now significantly longer. I brought up the Outlook 2007 Search Options dialog and noticed that my mailbox (running from an Exchange 2007 server) wasn't listed in the "Index messages in these data files:" list box. Next I ran the Windows "Find and fix problem with windows search" wizard which reported no errors. Then I brought up the Windows Indexing Options dialog which shows Outlook listed (as shown here): then clicked Advanced and Rebuilt the index. No dice - the listbox in the Outlook 2007 dialog still didn't show my mailbox. When I clicked the Modify button in the Indexing Options dialog I see the following: When I hover over the "oneindex://..." entry, the alt text indicates "This location is currently unavailable". When I delete it and rebuild the index, this entry returns. UPDATE: Comparison of the last screenshot above with a working PC shows that on the broken PC, the lower half of the dialog lists Outlook but neither Outlook or OneNote are showing in the upper half. The working PC has Outlook and OneNote in both parts of the dialog.

    Read the article

  • r1soft agent is failing with the error: "write error while sending code: Broken pipe"

    - by curiousguy
    I have an Ubuntu 10.04.4 LTS server with r1soft agent installed in it. Recently, the backups are failing with the following error. -------- write error while sending code: Broken pipe -------- I have reinstalled the buagent but to no avail. On checking the server logs, I could see the following errors listed in it: -------- # tail -f /var/log/messages |grep -i buagent Nov 17 03:35:06 microscope buagent: Need to back up 126 sectors Nov 17 03:35:06 microscope buagent: (Righteous Backup Linux Agent) 1.79.0 build 12433 Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.195) with valid RSA key Nov 17 03:35:06 microscope buagent: allowing control from backup server (10.128.136.201) with valid RSA key Nov 17 03:35:06 microscope buagent: sending auth challenge for allowed host at (10.128.136.201) port (47890) Nov 17 03:35:06 microscope buagent: host (10.128.136.201) port (47890) authentication successful Nov 17 03:35:06 microscope buagent: Backup request accepted. Starting backup. Nov 17 03:35:06 microscope buagent: Snapshot completed in 0.010 seconds. Nov 17 03:45:03 microscope buagent: Error reading blocks from snapshot. Nov 17 03:45:03 microscope buagent: Reading blocks failed Nov 17 03:45:03 microscope buagent: error backup aborted Nov 17 03:45:03 microscope buagent: backup failed on agent closing connection Nov 17 03:45:03 microscope buagent: Backup failed. Nov 17 03:45:03 microscope buagent: write error while sending code: Broken pipe (32) Nov 17 03:45:03 microscope buagent: tell child write failed -------- I tried changing the 'Timeout' and 'DiskAsPartition' value in '/etc/buagent/agent_config' file but no luck. Also, verified that proper route is added to the backup server. The agent is also running fine. Am I missing anything? Any help would be much appreciated. Note: CDP 2.0 is installed in the backup server.

    Read the article

  • Broken UAC, cant edit File/folders or change settings in user account

    - by Antoros
    It appears that UAC is broken cant move/delete some file/folders, when asked to use administrative right (and say yes) it shows the loading bar and then nothings gets moved/deleted, no error whatsoever opened control panel, user account and when i click on any option with the Shield (administrative rights) the mouse changes to loading and thengo back to normal, not opening any menu or showing any error Already done a sfc /scannow , no errors found Already used Microsoft's Fix it, reclycle bin broken and repaired, still the same error Used microsoftaccounts tool , this are the errors i got: Problem with microsoft account policy... <- this is the problem (didint fix) Trust this PC <- loop of redirections, cant get to trust this pc (only one with w8) Problems witht sytem registration : i think it is because of the soft system reset Some setting have sync turned off : i never configured anything to sync Rootcauses found and created logs : would like to know where the logs are saved... had to use a ".reg" file to change uac setting to never notify, thinking it would fix this, no, it stoped asking though, i can still open a cmd with Administrative rights, but cant access to UAC settings Accesed Administrator account (net user administrator /active:yes)and even with that account could change any settings so there it is, dont know what else to do in the moment (this pc broke with 8.1 update and was restored to factory configuration, it broke several drivers and kept most of the registry entries, i cant find the cause of this problem. other info: i tried to delete a file in a program folder and couldnt, downloaded unlocker to check first if it was permissions but no, it showed me a msg telling me that there wasnt any error, and if i would like to delete it, clicked on yes, and it did delete it, what amuses me is that i cant without this tool, not even using the feature that takes over ownership Edit: wow, in a not crappy pc chkdsk is fast, completed with no errors found : /

    Read the article

  • SFTP ChRoot result in broken pipe

    - by Patrick Pruneau
    I have a website that I want to add some restricted access to a sub-folder. For this, I've decided to use CHROOT with SFTP (I mostly followed this link : http://shapeshed.com/chroot_sftp_users_on_ubuntu_intrepid/) For now, I've created a user (sio2104) and a group (magento).After following the guide, my folder list look like this : -rw-r--r-- 1 root root 27 2012-02-01 14:23 index.html -rw-r--r-- 1 root root 21 2012-02-01 14:24 info.php drwx------ 15 root root 4096 2012-02-25 00:31 magento As you can see, i've chown root:root the folder magento I wanted to jail-in the user and ...everything else by the way. Also in the magento folder, I chown sio2104:magento everything so they can access what they want. Finally, I've added this to sshd_config file : #Subsystem sftp /usr/lib/openssh/sftp-server Subsystem sftp internal-sftp Match Group magento ChrootDirectory /usr/share/nginx/www/magento ForceCommand internal-sftp AllowTCPForwarding no X11Forwarding no PasswordAuthentication yes #UsePAM yes And the result is...well, I can enter my login, password and it's all finished with a "broken pipe" error. $ sftp [email protected] [....some debug....] [email protected]'s password: debug1: Authentication succeeded (password). Authenticated to 10.20.0.50 ([10.20.0.50]:22). debug1: channel 0: new [client-session] debug1: Requesting [email protected] debug1: Entering interactive session. Write failed: Broken pipe Connection closed Verbose mode gives nothing to help. Anyone have an idea of what I've done wrong? If I try to login with ssh or sftp with my personnal user, everything works fine.

    Read the article

  • How is made sure magnetic or electric fields from devices like transformers or fans close nearby do

    - by matnagel
    Fans and transformers which are inside the server case create magnetic and electric fields. Electric fields can be easily shielded, but what about magnetic fields, they can only be shielded with high cost materials like mu metal http://en.wikipedia.org/wiki/Mu-metal If a hard drive is installed too close to an intense transformer field, how is the magnetically stored information on the ferromagnetic surfaces of the disk kept safe? Even if drives are shielded, where are the limits? Is there some technical investigation or recommendation from manufacturers about this? (I never heard about something and never had any problem but I am interested in some facts. This is much preferred over what you believe or a habit you developed. Please try to give some solid infromation.) I have built and repaired many servers and sometimes I did put the harddrive on top of the power supply. Edit: This question is not about frequencies that could affect the drive via the power or data connectors of the drive, those are electronically decoupled and that's another question. Edit 2: The wikipedia page states that the motor inside the drive is shielded with mu metal. It is obvious that manufactureres have to take care of this. This question is about such influences from outside the drive.

    Read the article

  • dpkg broken while upgrading Debian Etch to Lenny

    - by artvolk
    Good day! While trying to recover a box to lenny it seems I've broken things. It upgrades libc and glib after that dpkg seems to be broken. I can run apt-get, but it gets segmentation fault from dpkg: # apt-get -f install Reading package lists... Done Building dependency tree... Done 0 upgraded, 0 newly installed, 0 to remove and 316 not upgraded. 9 not fully installed or removed. Need to get 0B of archives. After unpacking 0B of additional disk space will be used. /bin/sh: line 1: 4606 Segmentation fault /usr/sbin/dpkg-preconfigure --apt E: Sub-process /usr/bin/dpkg received a segmentation fault. I can login via SSH but even ls is not working: # ls Segmentation fault Is there anything I can do remotelly via SSH? # ldd /bin/ls linux-gate.so.1 => (0xffffe000) librt.so.1 => /lib/tls/i686/cmov/librt.so.1 (0xb7fc8000) libacl.so.1 => /lib/libacl.so.1 (0xb7fc2000) libselinux.so.1 => /lib/libselinux.so.1 (0xb7fac000) libc.so.6 => /lib/i686/cmov/libc.so.6 (0xb7e51000) libpthread.so.0 => /lib/tls/i686/cmov/libpthread.so.0 (0xb7e3f000) /lib/ld-linux.so.2 (0xb7fd8000) libattr.so.1 => /lib/libattr.so.1 (0xb7e3b000) libdl.so.2 => /lib/i686/cmov/libdl.so.2 (0xb7e37000) libsepol.so.1 => /lib/libsepol.so.1 (0xb7df6000) It seems I've temporary fixed it with: # touch /etc/ld.so.nohwcap From here: http://saintaardvarkthecarpeted.com/blog/archive/2005/08/_etc_ld_so_nohwcap.html

    Read the article

  • S.M.A.R.T. broken sectors

    - by Jeffrey Vandenborne
    Recently I received my hard drive (LaCie) that I've sent away for warranty, my disk failed, and I used Palimpsest Disk utility to check if anything was wrong in the S.M.A.R.T Status. And it said that there were a few broken sectors. So the next day, I went to the store and told the story. 4 weeks later I actually got my drive back. The first thing I did was plugging it in and starting the disk utility, and weirdly it showed me pretty much the exact same things, even the values of most tests were the same as they were before when my drive broke. The serial number is different though, but it does show a very peculiar value. Now I'm wondering, I'm almost sure it's the exact same drive and it still says I've got broken sectors, does it just say that because it has been cached in the drive somewhere while LaCie DID actually fix it? Or should I run the extended self test (which seems to take hours) first? Also I've tried the smartctl command tool, it says the drive has smart support, but it doesn't show anything, it says that it's enabled, but then it says that it's disabled, picture below The picture of the Disk utility: Thanks in advance

    Read the article

  • Confirm disk is broken when it passes all diagnostics

    - by Halfgaar
    I have a system with a potentially broken disk, but the disk passes all manner of diagnostics. I have been unable to confirm that the disk is broken. What are my options? I could just replace the disk, but because this situation is very similar to another more severe situation I have (long story), I'd like to actually make a proper diagnosis as opposed to randomly binning hardware. The issue and history is this: I had a Debian Linux PC (500 MHz P3) acting as router, nagios and munin. It crashed every couple of weeks. No logs or dmesg could be obtained (because it's an old Compaq that only boots when you configure it as keyboardless, making connecting a keyboard later, once it's booted, impossible). At the time, I just replaced the computer with another Compaq (P4 2.4 GHz) because I thought the hardware was faulty. However, it still crashed every couple of weeks. the difference is that on this computer, I can still SSH into it. It gives all kinds of errors on hda. I'd like to confirm that the disk is broken, but nothing I do confirms this: SMART error logs shows no errors. Normally when a disk starts acting up, SMART my pass, but it still records a read-error in the error log. SMART self-test (smartctl -t long /dev/sda) completes without errors. re-allocated sector count (a tell-tale parameter) has been 31 all its life, even when the disk was still in use in my desktop PC years ago, and it still is. The figure never changed. dd if=/dev/sda of=/dev/null bs=4096 passes with flying colors. What else can I do to assess the health of the drive? Again, this is not about making this router fully functional again, this is a disk forensic question, because it just so happens that I have another server that potentially has the same problem, and knowing the answer to this will possibly help me greatly. For the record, below are logs and such. This is the smartctl -a output: smartctl 5.40 2010-07-12 r3124 [i686-pc-linux-gnu] (local build) Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net === START OF INFORMATION SECTION === Model Family: Seagate Barracuda 7200.7 and 7200.7 Plus family Device Model: ST3120026A Serial Number: 5JT1CLQM Firmware Version: 3.06 User Capacity: 120,034,123,776 bytes Device is: In smartctl database [for details use: -P show] ATA Version is: 6 ATA Standard is: ATA/ATAPI-6 T13 1410D revision 2 Local Time is: Mon Jul 1 21:18:33 2013 CEST SMART support is: Available - device has SMART capability. SMART support is: Enabled === START OF READ SMART DATA SECTION === SMART overall-health self-assessment test result: PASSED General SMART Values: Offline data collection status: (0x82) Offline data collection activity was completed without error. Auto Offline Data Collection: Enabled. Self-test execution status: ( 24) The self-test routine was aborted by the host. Total time to complete Offline data collection: ( 430) seconds. Offline data collection capabilities: (0x5b) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. Offline surface scan supported. Self-test supported. No Conveyance Self-test supported. Selective Self-test supported. SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer. Error logging capability: (0x01) Error logging supported. No General Purpose Logging support. Short self-test routine recommended polling time: ( 1) minutes. Extended self-test routine recommended polling time: ( 85) minutes. SMART Attributes Data Structure revision number: 10 Vendor Specific SMART Attributes with Thresholds: ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 050 046 006 Pre-fail Always - 47766662 3 Spin_Up_Time 0x0003 097 096 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 10 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 31 7 Seek_Error_Rate 0x000f 084 060 030 Pre-fail Always - 820305 9 Power_On_Hours 0x0032 048 048 000 Old_age Always - 46373 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 605 194 Temperature_Celsius 0x0022 036 065 000 Old_age Always - 36 195 Hardware_ECC_Recovered 0x001a 050 046 000 Old_age Always - 47766662 197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0 199 UDMA_CRC_Error_Count 0x003e 200 196 000 Old_age Always - 6 200 Multi_Zone_Error_Rate 0x0000 100 253 000 Old_age Offline - 0 202 Data_Address_Mark_Errs 0x0032 100 253 000 Old_age Always - 0 SMART Error Log Version: 1 No Errors Logged SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Extended offline Aborted by host 80% 46361 - # 2 Extended offline Completed without error 00% 46358 - # 3 Short offline Completed without error 00% 12046 - # 4 Extended offline Completed without error 00% 10472 - # 5 Short offline Completed without error 00% 10471 - # 6 Short offline Completed without error 00% 10471 - # 7 Short offline Completed without error 00% 6770 - # 8 Extended offline Aborted by host 90% 5958 - # 9 Extended offline Aborted by host 90% 5951 - #10 Short offline Completed without error 00% 5024 - #11 Extended offline Aborted by host 80% 5024 - #12 Short offline Completed without error 00% 3697 - #13 Short offline Completed without error 00% 237 - #14 Short offline Completed without error 00% 145 - #15 Short offline Completed without error 00% 69 - #16 Extended offline Completed without error 00% 68 - #17 Short offline Completed without error 00% 66 - #18 Short offline Completed without error 00% 49 - #19 Short offline Completed without error 00% 29 - #20 Short offline Completed without error 00% 29 - SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testing Selective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk. If Selective self-test is pending on power-up, resume after 0 minute delay. And this is the dmesg error when it has crashed (which repeats for a bunch of different sectors): [1755091.211136] sd 0:0:0:0: [sda] Unhandled error code [1755091.211144] sd 0:0:0:0: [sda] Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [1755091.211151] sd 0:0:0:0: [sda] CDB: Read(10): 28 00 08 fe ad 38 00 00 08 00 [1755091.211166] end_request: I/O error, dev sda, sector 150908216

    Read the article

  • How to upgrade OS on Mac Mini with external USB Drive?

    - by David
    We have a G4 Mac Mini, circa 2005, running Mac OS X 10.4 Tiger, and we want to upgrade to 10.5 Leopard. We have a Leopard install disk, but the optical drive in this mini is broken. So we transferred the install disk image to a USB HDD, but now we can't figure out how to boot off it. From what I've read in Mac forums, some PPC Macs, including some G4's, have been able to boot from USB, even though it sounds like this wasn't officially supported, and it may well depend on the specific model of USB drive and Mac. My Mac says CPU is "PowerPC G4 (1.2)" and Boot ROM is "4.8.9f4". I was hoping I might just find somebody here who had that same Mac Mini and find out if they could make it work. I'd especially like to know any specifics about the USB drive they found success with. Any insights at all would be appreciated. Thanks.

    Read the article

  • write error: Broken pipe

    - by Fahim
    Hi, I have to run a tool on around 300 directories. Each run take around 1 minute to 30 minute or even more than that. So, I wrote a python script having a loop to run the tool on all directories one after another. my python script has code something like: for directory in directories: os.popen('runtool_exec ' + directory) But when I run the python script I get the following error messages repeatedly: .. tail: write error: Broken pipe date: write error: Broken pipe .. All I do is login on a remote server using ssh where the tool, python script, and subject directories are kept. When I individually run the tool from command prompt using command like: runtool_exec directory it works fine. "broken pipe" error is coming only when I run using the python script. Any idea, workaround? Please suggest. Thanks. Fahim

    Read the article

  • codeigniter broken link

    - by jaypee
    hi guys, im new in codeigniter. i have a project running perfectly in my localhost. when i deployed, my links seem to be broken. e.g. mysite.com displays the homepage without any error. now, i have a link let's say an about us link e.g. mysite.com/main/about where main is my controller and about is my function. the problem is the about us link is broken e.g. "Oops! This link appears to be broken." do you have any idea where did i go wrong? thank you for any positive response.

    Read the article

  • Batch backup a harddrive without modifying access times C#

    - by johnathan-doena
    I'm trying to write a simple program that will backup my flash drive. I want it to work automatically and silently in the background, and I also want it to be as quick as possible. The thing is, resetting all the access times is useless to me, and something I want to avoid. I know I can read the access times and set them back, but I bet it will fail one day in the future. It would be much simpler to read the files without ever changing it. Also, what is the fastest way to do this? What differences would there be between, say, a flash drive and an external hard drive. I am writing this in C#, as it is the simplest way to do it and it will probably last more generations of Windows..

    Read the article

  • How to fix broken IIS on Windows 7

    - by ruslan
    how can I fix broken IIS on Windows 7 ? Deinstalling it via "Windows Features" doesn't help. Apparently it doesn't uninstall IIS completely so on my subsequent attempts to install it installer hangs and I can see in Process Explorer that it keeps trying to launch svchost.exe -iis for 10 mins and then gives me error message. Reinstalling whole Windows with all apps would take me another 3 days :/ Please help.

    Read the article

  • searching for replace broken laptop screen

    - by eran
    hey, i have a laptop with 16'' wide screen, but the screen is broken and i want to buy only the screen and replace it.. my laptop is: HP Pavilion dv6-1050us what i know about the screen is that it's model number 512357-001 "16inch widescreen BrightView BV display panel IMR, with web camera and microphone". I did find some screen which seems to be the one but i'm not sure and dont want to spend money for the wrong screen, can any one help please? thanks, eran

    Read the article

  • How can I fix a broken AVI file?

    - by KeyboardMonkey
    I have a broken AVI, it won't play in VLC, Xine or MPlayer. I tried Handbrake (reads the file and resets the source to None), OggConvert, Avidemux and mencoder fail to read the file, I cannot seem to reencode this file. I suspect the header info is corrupt, is there a way to get the a/v streams out with a missing header?

    Read the article

  • Unicorn: Sub-Url Generated Links Broken

    - by YellowJK
    I am currently trying to stand up an instance of redmine, however currently The generated links in my redmine instance are all broken. I am attempting to serve redmine from a sub-url i.e example.com/redmine I have searched, but I have not found any information on a prefix option (similar to mongrel) I currently have the assets and formatting working properly, from my previous question. Redmine served via Apache / Unicorn My current setup is apache / unicorn Thanks in adavanced

    Read the article

  • Ubuntu 10.04 boot splash screen and themes broken

    - by thezachperson31
    I recently upgraded to the release candidate of Ubuntu 10.04. Since then, two problems have occurred and persisted: the boot splash screen has reduced down to a black screen with random color blocks/text/gibberish at the top; and the themes are broken, as in the light themes have checkboxes in menus the same color as the background, and the dark themes don't correctly change the font colors in the top menu. Help? On a side note, is there a need to upgrade from 10.04 RC to LTS?

    Read the article

  • Broken Motherboard Trace

    - by CoffeeBean
    When you're fairly certain that a motherboard trace is broken near the CPU (i.e.: you suspect heatsink / fan was improperly inserted) is it advisable to attempt a repair? I've heard that it can be done using a substance for repairing embedded windshield defoggers. Has anyone had any experience with this?

    Read the article

  • Broken pipe on nginx

    - by schneck
    Hi there, I set up php/fastcgi with nginx and now I want to upload very large files via a java-applet. After about 30 seconds, the applet reports a "Broken pipe". In the server logs, i find nothing. I changed any setting in the php.ini (max_execution_time, max_input_time, memory_limit, post_max_size) to very high values, but nothing helps. Any idea?

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >