Search Results

Search found 3469 results on 139 pages for 'broken harddrive'.

Page 16/139 | < Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >

• Automatically distinguish difference between multiple HDDs in linux?

  - by Jakobud

  I'm running Ubuntu Server 9.10. I have two external USB HDDs. I use them each for different backup reasons. So certain data gets stored on one HDD, and different information gets stored on the other HDD. I want to make a script that can look at the external HDD can determine which HDD it is, so that it can copy the proper information to it. Is there a way for Linux to determine this? Like if I see one HDD as /dev/sdc1, then unplug it and plug in the other HDD, should Linux see it as /dev/sdd1 or will it be /dev/sdc1? I'm a bit of a Linux newb and I don't quite understand how it determines the /dev/sdxx values that it assigns to drives.

  Read the article

• Has anyone had luck getting an external hard drive working with a PCMCIA USB card?

  - by Carl

  I would like to know if anyone has had any success in getting and external 2.5" IDE hard drive in an external case (w/USB cable) working when plugged into a PCMCIA USB card. My hard drive doesn't work when plugged into my HT-Link Cardbus/PCMCIA USB 2.0 2-port card (NEC / 32-bit). My MP3 player will work fine when plugged into it. I tried plugging in both of the USB cables that are one one end (Y cable), and it doesn't make a difference. I read the problem may be insufficient power.

  Read the article

• Anyway I can trick Carbonite into backing up an external hard drive?

  - by Brian

  I use carbonite to back up my PC (Windows XP). We were running low on disk space on our home PC (down to 15 gig) so I went out and purchased an external hard drive. However, Carbonite will not back it up. I just want the external drive to be extra disk space. From their FAQ: The current version of Carbonite backs up only the files that reside on permanent hard drives on your computer. It will not back up network drives, external drives, and NAS (network accessed storage) drives. If there are files on a remote drive that you wish to include in your Carbonite backup, you should copy the files to a folder on your local hard drive. If the files are on a shared network drive, you could install Carbonite on the computer on which the network shared drive physically exists, and back the files up directly from that computer. Check back soon for a Carbonite service plan that will allow you to back up your external drives.

  Read the article

• Trying to turn an WD Mybook 1TB to slave drive in PC

  - by Steph W

  Yes I realise that most external Hard Drives would not be transitioned into internal sitting Hard Drives, but unfortunately we broke the miniUSB connection that transfers the data from external Hard Drive to laptop. What we are TRYING to do now, is get the WD MyBook 1TB to funtion alongside (preferably as SLAVE) to my currently exsisting Desktop Hard Drive. both are SATA drives. We have the SATA power, and Data cables, and these are in place (but - somehow NOT working) - Help please - I am not computer illeterate, just don't know how to switch this so it works. How do I turn one into master, and the newer one (that was external) into the slave drive?

  Read the article

• How should one handle an external hard drive without an enclosure?

  - by TheLakersHighlights

  How should I go about mounting an external hard drive without an enclosure? I have a IDE/SATA to USB adapter. But where should I put the drive, what side should be facing upwards, etc?

  Read the article

• External HDD incorrectly detected as internal - how change to enable hot swap/eject?

  - by Sam

  Hi All, I have win 7 x64 Home Prem. The HDD is a seagate barracuda, 7200.7 ST3120827AS. 3.5", Serial: 3ms006n6, Firmware: 3.42 (no further updates) NexStar CX External case (drivers installed). I have three drives: WD320 with OS installed WD750 data storage (internal) seagate 120 (external) - connected via esata board connected to sata on motherboard (MSI p43 neo) Tried uninstalling HDD in device manager to no effect. Also the internal WD750 is detected as an external drive and win taskbar icon allows for it to be ejected (unlike the seagate). All drives are configured - Online, Simple, Basic, NTFS, Active, Primary Partition (except c drive). The seagate was previously used as a primary disk with XP operating system so I deleted the volume and created/reformatted (not quick). HDD is no longer "Active". But did not fix problem. Background Originally, I installed win 7 with the bios set to IDE and forgot to install the chipset drivers. Then I changed win 7 to install the AHCI drivers, changed the bios to AHCI and rebooted. Win 7 loaded drivers but WD HDD gave problems/crashed. I installed chipset drivers and latest intell storage matrix software thingie (in safe mode). Everything worked fine after that except for the problem of not corrrectly detecting the external drive] I have noticed that under the driver properties (and similarly in the registry) the two drives are configured differently (e.g. in driver details property capabilities for the WD the value is set to 0000006, CM_DEVCAP_REMOVABLE & EJECTSUPPORTED - whereas the seagate shows 0000080 & CM_DEVCAP_SURPRISEREMOVALOK). Any easy way to configure things? I tried physically swapping the sata connections on the mainboard without success So far I have found that a solution to my problem might be to perform some reg changes: http://superuser.com/questions/12955/how-do-i-remove-the-option-to-eject-sata-drives-from-the-windows-7-tray-icon

  Read the article

• Bad HD and robocopy

  - by acidzombie24

  After my HD gave me crc errors I wanted to copy one drive to another and picked up a new 1TB hd. I am using the command robocopy G: J: /MIR /COPYALL /ZB First it tried copying the file a few times (i didnt count, its not in my window anymore) and got an access denied error, error 5. Then it tried again and locked up. I tried copying that specific file (14mb) and windows says "cant read from source file or disk". I started robocopy again. Hopefully it will ignore it after a fail attempt or two but what options can i use to say if it doesnt work continue to the next file. It looked like that is what it was doing but for this last one it repeated more then 4times and locked up finally. I'm open to other copy solutions. I do prefer built in solutions. I am using windows 7 Also how might i do this without the /MIR option. Is /S /E good enough? flag reference here -edit- i see i can control retries with /R: but i am still open to alternative solutions.

  Read the article

• Old HDD is not getting detected when connected through USB

  - by Mayur

  My laptop HDD got corrupted and I replaced that with a new HDD. Now I wanna retrieve the data in the old HDD. I tried using external HDD casing and connected it my laptop cable thru USB. But it is not getting detected. Is there any way to retrieve the data from my old HDD. Please help. Thanks

  Read the article

• Step by step instructions to make dos "see" and "access" usb hard drives

  - by Gireesh Venkateswaran

  I am stuck with an USB external hard drive (Maxtor 1 Touch) 750GB that crashed. I have photos and home movies (my son's birth, first birthday etc) that are very important to me. I am given to understand that Spinrite is a very good tool to use, but It does not come "with out of the box" capabilities to access USB drives. If I open the case to get the HDD out from my External HDD, I would compromise the warrenty and I would not be able to exchange the Drive. I have done a bit of research and have the drivers that could help. But the bit I am missing is, How to put it all together. I would really appreciate it if some one can give me step by step instruction where I can create a dos boot cd that can load the drivers and assign a drive letter to it so that I can make Dos "See" the external hard drive. I have a Toshiba satellite laptop that runs Windows XP (Home). It does not have a floppy drive. I will be greatful to your help in the regard.

  Read the article

• Running a VM off of an external HD via USB

  - by Nelson LaQuet

  Is it viable to run (i.e. reference the vmx/vhd directly from the mounted drive) a VM (vmware running Windows Seven) off of an external HD via USB? I mean, I know it's possible, but I guess I'm asking if USB provides enough bandwidth for normal usage... If so, are there any particular brands that may be better or worse? I know that ESATA would be a more viable setup, but my laptop doesn't have an ESATA port. Currently I use the VM to segregate all of my work development servers and software from my main machine; so I will be running all development servers and tools on the VM directly.

  Read the article

• Windows Boot disc to save files?

  - by acidzombie24

  Somehow after updating my legit windows 7 OS with no pirated or mod software on my PC i was welcome to a black screen. I popped in my ghost disc and copied the files i need to an external HD. IIRC windows 7 disc can do that too. Problem with the way i did it on ghost was it excepted me to select 1 file (an HD disc image) so i couldnt select multiple folders to move. Also when i did move i had no idea if it finished or how long it would take. My linux live cd couldnt access the HD. Anyways, is there a disc i can use to easily copy files from my laptop to my external HD? I think ghost, windows 7 and windows server all allow me but is there one that is better suited to copy files?

  Read the article

• Having problems with Grub2 booting Ubuntu from my External Hard Drive

  - by anonymous

  I installed Ubuntu on my external hard drive but it won't boot on my laptop. what do i do? i did some reading and traced the source of the problem to grub2. Apparently, grub2 doesn't use the device's UUID, and uses the linux directory instead (/dev/sdf2). This means that whenever i plug my E-HDD into a system that has a different number of drives connected to it, i won't be able to boot without editting the boot command. I don't understand it too well but that's what i got from what i read. Is there anyway to fix this?

  Read the article

• Form-Fitting Laptop Hard Drive?

  - by Peder Rice

  Not sure how to explain this exactly... if you need me to clarify, please add a comment and I'll address it. I'm looking for a USB hard drive that conforms to a laptop. Perhaps something that can be plugged in and carried around, tossed into a backpack without fear of ruining the connector or accidentally coming unplugged. Has anyone seen a hard drive like this?

  Read the article

• How to back up a Windows Home Server over the network?

  - by Jay Bazuzi

  One of the very few reasons I have to physically interact with my Windows Home Server is to back it up to an external hard drive, with the "Backup Server" feature. It would be more convenient to plug the external drive in to a desktop PC, and then do the backup over the network. Is there a way to do this? I've heard a little about iSCSI, but as far as I can tell it costs money, and I'm hoping for something free.

  Read the article

• Booting ubuntu from usb hdd: GRUB menu not shown

  - by emanemos

  Hello, could anyone help me to boot ubuntu-9.04 from usb hard disk? This disk contains /boot primary partition. During ubuntu installation I used "Advanced" button and asked to install GRUB to the /boot partition. Later I checked whether GRUB files are really present in this partition. They are. However, I get stuck while trying to boot. The boot menu ("ubuntu generic version", "ubuntu recovery mode", etc...) is not shown. Instead I am thrown to GRUB minimal bash-like version. I feel at a loss and have no idea why I am pointed to this minimal version. Can anybody prompt me what to do?

  Read the article

• how to redirect itunes to external hard drive

  - by oo

  i have all my music on my hard drive but its running out of space. i bought an external hard drive, copied all my music over i went into itunes advanced preferences and changed my music location but when i view the itunes music library XML file in notepad, i still see a lot of things pointing to my regular hard drive i didn't check "Keep music files organized" because i didn't want itunes trying to copy everything over from my regular hard drive (because i already did it) is there any other way to simply refresh the music list given a new root directory.

  Read the article

• About Hard Disk Drive Docks

  - by Crossbrowser

  I'm thinking of buying a drive dock to put my unused large HDD to use. I will also probably use the dock to backup files and swap the drives regularly. I have a few questions though: Are they noisy? I plan to use them via USB (because I don't think I have eSata connectors), am I gonna want to kill myself every time I backup? (I know it's supposed to be 480 Mbps, but how realistic is this?) Do you recommend a particular model? (I was thinking about this Startech HDD dock) Thank you

  Read the article

• Western Digital My Book not recognized by WD software

  - by Kari

  A few years ago I bought a WD My Book Pro 2. It worked fine for a while, then one of the drives failed and I sent it back to be replaced under warranty. I never got around to setting up the new one when I got it back. I finally ran out of room on my internal drive, so I tried to use the external - no go. Both drives spin up, but aren't recognized by either Disk Utility (Mac) or the WD Drive Manager. I tried on a PC as well with fresh software. Then I pulled the drives out of the enclosure (warranty is already expired) and plugged them straight into the PC. Both recognized and working 100% in RAID0. BIOS recognizes either disk as functional; Windows only sees them when both are connected due to the RAID which I can't change without the WD software. The drives that were returned to me are the "Green" drives which I've read are NOT recommended for RAID. Is it possible that this is interfering with them reading externally? Any other ideas? My main computer is a laptop so using them internally isn't an option :(

  Read the article

• Server drives: 2.5" SCSI less reliable than 3.5" ?

  - by Bill

  Just had an HP 2.5" SAS 10k drive fail on a RAID5 array after about 2.5 years. It made me wonder if this was a fluke or an indication that 2.5" drives are less reliable than 3.5" SAS drives. I've had many 3.5" SAS drives running for many years without any issues (knock on wood). I would think that smaller drives would generate less heat and therefore be more reliable, but couldn't find any evidence of this. I realize all drives will eventually fail and that it's a crap shoot with any particular model, but was hoping someone could point out some related studies or comment on the SCSI drive sizes they've found to be most reliable in servers. Thanks.

  Read the article

• grub2 error: out of disk

  - by Carl Smotricz

  I'm trying to make a 250G USB hard disk Ubuntu-bootable on a Compaq nc6220 laptop. I've removed all other disks, so /dev/sda (the USB disk) is the only disk other than CDROM. I installed Ubuntu 9.10 to this disk from the live CD, putting the bootloader on /dev/sda . The default system couldn't be booted, and nothing I did in the Grub menu/cmdline helped. So I chrooted onto the disk and did grub-install /dev/sda. That seemed to work fine, but Grub (1.97 beta 4) keeps coming up with error: out of disk Even when I drop to the command line to do something simple like ls or help, it's always the same error message. Any hints for resolving this, please?

  Read the article

• Is it possible to use a PC as a external drive via USB?

  - by homemdelata

  I have a bluray player that has a USB interface that allows me to plug external hard drives and pendrives for me to play movies or music files. I was wondering if it's possible to have the PC or notebook or any other computer-like device using a USB-USB cable and make the bluray player detects this as an external drive. Note: I'm using a bluray player as example but it can be the same for DVD players, TV or sound sytems.

  Read the article

• Laptop crashes when connecting to external harddisk

  - by Gnot

  I recently had a problem with my laptop. when I booted up the machine, I would get a SMART failure error message and when I pressed F1 to continue, it would take a very long time to boot and it would come back to the same error message again. Thinking that my hard disk was dying, I bought a new hard disk and installed on my laptop and so now my laptop is alright. However I need to recover data from that old hard disk, so I bought an external hard disk case and placed the old hard disk onto the case and connected to my laptop with USB. The first few times when I connected, I could see the files from the old hard disk and managed to copy some files over although it took extremely long to transfer. But now whenever I connect to the old hard disk, after a few minutes, my laptop will crash and re-boot. Do you think my old hard disk is dead beyond repair? Or you can offer some help here? Any assistance would be appreciated!

  Read the article

• How do I get a USB hard-disk adaper to work with a PCMCIA USB card?

  - by Carl

  I have a PCMCIA (Cardbus) 32bit USB 2.0 2-port card. If I plug my MP3 player in it works fine. I have a USB adapter for a hard disk drive. When I plug that into the PCMCIA USB slot the light on that hard disk flashed between red and green - it should stay green. "USB Mass Storage device" is added in the Device Manager, but no drive letter appears in My Computer. The installing device icon down by the clock never goes away. (Windows XP SP3.)

  Read the article

• External HD makes scraping sound when idle. How to disable it?

  - by StackedCrooked

  My external hard disk often starts making an irritating scraping sound. It stops if I do something that causes disk activity on it. But then, after 3 minutes or so, it starts again. It's very annoying. Is there a way to disable it? It's a Western Digital WD 10EAVS.

  Read the article

• External Hard Disk's secter could not be read ?

  - by mgpyone

  I've an 500 GB Seagate External Hard Disk (NTFS) . Currently, I can't open it at Windows. Thus, I've tired with chkdsk command .. but still it stopped and can't continue checking disk.. Also I've tired with fsck on Mac . Then, it shows me the Error .. /Volumes/<HD Name>/ is not a character device CONTINUE? yes /Volumes/<HD Name>/ (NO WRITE) CANNOT READ: BLK 16 CONTINUE? yes THE FOLLOWING DISK SECTORS COULD NOT BE READ: 16, 17, 18, 19, 20, 21, 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, ioctl (GCINFO): Inappropriate ioctl for device fsck: /Volumes/<HD Name>/: can't read disk label The volume I've used is around 300 GB , Thus, it's hard to back up and format again . Thus, any helpful suggestions and solutions will be appreciated pretty well.

  Read the article

< Previous Page | 12 13 14 15 16 17 18 19 20 21 22 23  | Next Page >