Search Results

Search found 1653 results on 67 pages for 'defaults'.

Page 9/67 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Unable to Mount an external hard drive (NTFS)

  - by Mediterran81

  Ubuntu 11.10. When I plug my external Drive Western Digital MyPassport (500Go NTFS) I named WD. I get the following error: Unable to mount WD Error mounting: mount exited with exit code 1: helper failed with: mount: according to mtab, /dev/sdb1 is already mounted on /media/WD mount failed I have no problem with the internal NTFS partitions that auto-mounts on startup (ntfs-config does that). If I plug the WD before I boot Ubuntu, upon login, it's recognized and I can access without no problem. But if I remove it using (Safely remove) and then replug it, I get the error above. Here is my fstab: # /etc/fstab: static file system information. # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 #Entry for /dev/sda5 : UUID=24540d0f-5803-493c-ace9-e3b3c0cedb26 / ext4 errors=remount-ro 0 1 #Entry for /dev/sda3 : UUID=E4C43F7EC43F51D2 /media/OS ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sda2 : UUID=6A0070F10070C61B /media/RECOVERY ntfs-3g defaults,locale=en_US.UTF-8 0 0 #Entry for /dev/sdb1 : UUID=EA6854D268549F5F /media/WD ntfs-3g defaults,nosuid,nodev,locale=en_US.UTF-8 0 0 #Entry for /dev/sda6 : UUID=ed077c52-c50e-406c-9120-9cb6f86ec204 none swap sw 0 0 Here is my mtab /dev/sda5 / ext4 rw,errors=remount-ro,commit=0 0 0 proc /proc proc rw,noexec,nosuid,nodev 0 0 sysfs /sys sysfs rw,noexec,nosuid,nodev 0 0 fusectl /sys/fs/fuse/connections fusectl rw 0 0 none /sys/kernel/debug debugfs rw 0 0 none /sys/kernel/security securityfs rw 0 0 udev /dev devtmpfs rw,mode=0755 0 0 devpts /dev/pts devpts rw,noexec,nosuid,gid=5,mode=0620 0 0 tmpfs /run tmpfs rw,noexec,nosuid,size=10%,mode=0755 0 0 none /run/lock tmpfs rw,noexec,nosuid,nodev,size=5242880 0 0 none /run/shm tmpfs rw,nosuid,nodev 0 0 /dev/sda3 /media/OS fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 /dev/sda2 /media/RECOVERY fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 /dev/sdb1 /media/WD fuseblk rw,nosuid,nodev,allow_other,blksize=4096 0 0 binfmt_misc /proc/sys/fs/binfmt_misc binfmt_misc rw,noexec,nosuid,nodev 0 0 gvfs-fuse-daemon /home/hanine/.gvfs fuse.gvfs-fuse-daemon rw,nosuid,nodev,user=hanine 0 0 Appearently it cannot be mounted because upon login, it finds that it is already mounted. Some sort of conflict. Does anyone have a clue on how to solve this. Thanks.

  Read the article

• Insane load average after reboot

  - by Gazzer

  After doing a reboot of Ubuntu server 12.04 LTS (after an apt-get dist-upgrade) my server load (on a 16GB) machine goes insane (around 80) for about 10 or 15 minutes The only things I can think of are these two processes: /usr/bin/mysql --defaults-file=/etc/mysql/debian.cnf --skip-column-names --batch -e ? select concat('select count(*) into @discard from `',? TABLE_SCHEMA, '`.`', TABLE_NAME, '`') ? from information_schema.TABLES where ENGINE='MyISAM' /usr/bin/mysql --defaults-file=/etc/mysql/debian.cnf --skip-column-names --silent --batch --force -e select count(*) into @discard from `information_schema`.`PARTITIONS` Is this normal?

  Read the article

• cryptsetup partitions not detected at boot

  - by Luis

  I installed a fresh 12.04 and tried to mimic what I had for 10.04. swap should be encrypted with a urandom key and there's another partition that will contain home and other directories. # cat /etc/crypttab | grep -v '^#' | grep -v '^$' cryptswap /dev/sda5 /dev/urandom swap encriptado /dev/sda6 # grep -e 'cryptswap' -e 'encriptado' /etc/fstab /dev/mapper/cryptswap swap swap defaults 0 0 /dev/mapper/encriptado /encriptado ext4 defaults 0 0 I also apt-get install cryptsetup When I boot, the system says (try to translate) that either the partition is not found or is not ready. I should wait, press M for manual or S to jump over. What am I missing here?

  Read the article

• How to tune down the Hyperic built-in postgresql database for a small setup

  - by Svish

  We are testing out Hyperic 4.5.1 in a quite small environment for now. Currently there are just 1-5 agents and there probably won't be any more than 10-15. When I run ps ax there are 20(!) postgres processes running. For a small setup like this, that can't be necessary, can it? I'm a software developer and don't have much experience with setting up servers and such though, so don't really know. Either way, what settings are appropriate for a small Hyperic setup like this? Current, default and untouched configuration file, hqdb/data/postgresql.conf: # ----------------------------- # PostgreSQL configuration file # ----------------------------- # # This file consists of lines of the form: # # name = value # # (The '=' is optional.) White space may be used. Comments are introduced # with '#' anywhere on a line. The complete list of option names and # allowed values can be found in the PostgreSQL documentation. The # commented-out settings shown in this file represent the default values. # # Please note that re-commenting a setting is NOT sufficient to revert it # to the default value, unless you restart the server. # # Any option can also be given as a command line switch to the server, # e.g., 'postgres -c log_connections=on'. Some options can be changed at # run-time with the 'SET' SQL command. # # This file is read on server startup and when the server receives a # SIGHUP. If you edit the file on a running system, you have to SIGHUP the # server for the changes to take effect, or use "pg_ctl reload". Some # settings, which are marked below, require a server shutdown and restart # to take effect. # # Memory units: kB = kilobytes MB = megabytes GB = gigabytes # Time units: ms = milliseconds s = seconds min = minutes h = hours d = days #--------------------------------------------------------------------------- # FILE LOCATIONS #--------------------------------------------------------------------------- # The default values of these variables are driven from the -D command line # switch or PGDATA environment variable, represented here as ConfigDir. #data_directory = 'ConfigDir' # use data in another directory # (change requires restart) #hba_file = 'ConfigDir/pg_hba.conf' # host-based authentication file # (change requires restart) #ident_file = 'ConfigDir/pg_ident.conf' # ident configuration file # (change requires restart) # If external_pid_file is not explicitly set, no extra PID file is written. #external_pid_file = '(none)' # write an extra PID file # (change requires restart) #--------------------------------------------------------------------------- # CONNECTIONS AND AUTHENTICATION #--------------------------------------------------------------------------- # - Connection Settings - #listen_addresses = 'localhost' # what IP address(es) to listen on; # comma-separated list of addresses; # defaults to 'localhost', '*' = all # (change requires restart) port = 9432 # (change requires restart) max_connections = 100 # (change requires restart) # Note: increasing max_connections costs ~400 bytes of shared memory per # connection slot, plus lock space (see max_locks_per_transaction). You # might also need to raise shared_buffers to support more connections. #superuser_reserved_connections = 3 # (change requires restart) #unix_socket_directory = '' # (change requires restart) #unix_socket_group = '' # (change requires restart) #unix_socket_permissions = 0777 # octal # (change requires restart) #bonjour_name = '' # defaults to the computer name # (change requires restart) # - Security & Authentication - #authentication_timeout = 1min # 1s-600s #ssl = off # (change requires restart) #password_encryption = on #db_user_namespace = off # Kerberos #krb_server_keyfile = '' # (change requires restart) #krb_srvname = 'postgres' # (change requires restart) #krb_server_hostname = '' # empty string matches any keytab entry # (change requires restart) #krb_caseins_users = off # (change requires restart) # - TCP Keepalives - # see 'man 7 tcp' for details #tcp_keepalives_idle = 0 # TCP_KEEPIDLE, in seconds; # 0 selects the system default #tcp_keepalives_interval = 0 # TCP_KEEPINTVL, in seconds; # 0 selects the system default #tcp_keepalives_count = 0 # TCP_KEEPCNT; # 0 selects the system default #--------------------------------------------------------------------------- # RESOURCE USAGE (except WAL) #--------------------------------------------------------------------------- # - Memory - shared_buffers = 64MB # min 128kB or max_connections*16kB # (change requires restart) #temp_buffers = 8MB # min 800kB #max_prepared_transactions = 5 # can be 0 or more # (change requires restart) # Note: increasing max_prepared_transactions costs ~600 bytes of shared memory # per transaction slot, plus lock space (see max_locks_per_transaction). work_mem = 2MB # min 64kB maintenance_work_mem = 32MB # min 1MB #max_stack_depth = 2MB # min 100kB # - Free Space Map - max_fsm_pages = 204800 # min max_fsm_relations*16, 6 bytes each # (change requires restart) #max_fsm_relations = 1000 # min 100, ~70 bytes each # (change requires restart) # - Kernel Resource Usage - #max_files_per_process = 1000 # min 25 # (change requires restart) #shared_preload_libraries = '' # (change requires restart) # - Cost-Based Vacuum Delay - #vacuum_cost_delay = 0 # 0-1000 milliseconds #vacuum_cost_page_hit = 1 # 0-10000 credits #vacuum_cost_page_miss = 10 # 0-10000 credits #vacuum_cost_page_dirty = 20 # 0-10000 credits #vacuum_cost_limit = 200 # 0-10000 credits # - Background writer - #bgwriter_delay = 200ms # 10-10000ms between rounds #bgwriter_lru_percent = 1.0 # 0-100% of LRU buffers scanned/round #bgwriter_lru_maxpages = 5 # 0-1000 buffers max written/round #bgwriter_all_percent = 0.333 # 0-100% of all buffers scanned/round #bgwriter_all_maxpages = 5 # 0-1000 buffers max written/round #--------------------------------------------------------------------------- # WRITE AHEAD LOG #--------------------------------------------------------------------------- # - Settings - fsync = on # turns forced synchronization on or off #wal_sync_method = fsync # the default is the first option # supported by the operating system: # open_datasync # fdatasync # fsync # fsync_writethrough # open_sync #full_page_writes = on # recover from partial page writes #wal_buffers = 64kB # min 32kB # (change requires restart) commit_delay = 100000 # range 0-100000, in microseconds #commit_siblings = 5 # range 1-1000 # - Checkpoints - checkpoint_segments = 10 # in logfile segments, min 1, 16MB each #checkpoint_timeout = 5min # range 30s-1h #checkpoint_warning = 30s # 0 is off # - Archiving - #archive_command = '' # command to use to archive a logfile segment #archive_timeout = 0 # force a logfile segment switch after this # many seconds; 0 is off #--------------------------------------------------------------------------- # QUERY TUNING #--------------------------------------------------------------------------- # - Planner Method Configuration - #enable_bitmapscan = on #enable_hashagg = on #enable_hashjoin = on #enable_indexscan = on #enable_mergejoin = on #enable_nestloop = on #enable_seqscan = on #enable_sort = on #enable_tidscan = on # - Planner Cost Constants - #seq_page_cost = 1.0 # measured on an arbitrary scale #random_page_cost = 4.0 # same scale as above #cpu_tuple_cost = 0.01 # same scale as above #cpu_index_tuple_cost = 0.005 # same scale as above #cpu_operator_cost = 0.0025 # same scale as above #effective_cache_size = 128MB # - Genetic Query Optimizer - #geqo = on #geqo_threshold = 12 #geqo_effort = 5 # range 1-10 #geqo_pool_size = 0 # selects default based on effort #geqo_generations = 0 # selects default based on effort #geqo_selection_bias = 2.0 # range 1.5-2.0 # - Other Planner Options - #default_statistics_target = 10 # range 1-1000 #constraint_exclusion = off #from_collapse_limit = 8 #join_collapse_limit = 8 # 1 disables collapsing of explicit # JOINs #--------------------------------------------------------------------------- # ERROR REPORTING AND LOGGING #--------------------------------------------------------------------------- # - Where to Log - log_destination = 'stderr' # Valid values are combinations of # stderr, syslog and eventlog, # depending on platform. # This is used when logging to stderr: redirect_stderr = on # Enable capturing of stderr into log # files # (change requires restart) # These are only used if redirect_stderr is on: log_directory = '../../logs' # Directory where log files are written # Can be absolute or relative to PGDATA log_filename = 'hqdb-%Y-%m-%d.log' # Log file name pattern. # Can include strftime() escapes #log_truncate_on_rotation = off # If on, any existing log file of the same # name as the new log file will be # truncated rather than appended to. But # such truncation only occurs on # time-driven rotation, not on restarts # or size-driven rotation. Default is # off, meaning append to existing files # in all cases. log_rotation_age = 1d # Automatic rotation of logfiles will # happen after that time. 0 to # disable. #log_rotation_size = 10MB # Automatic rotation of logfiles will # happen after that much log # output. 0 to disable. # These are relevant when logging to syslog: #syslog_facility = 'LOCAL0' #syslog_ident = 'postgres' # - When to Log - #client_min_messages = notice # Values, in order of decreasing detail: # debug5 # debug4 # debug3 # debug2 # debug1 # log # notice # warning # error #log_min_messages = notice # Values, in order of decreasing detail: # debug5 # debug4 # debug3 # debug2 # debug1 # info # notice # warning # error # log # fatal # panic #log_error_verbosity = default # terse, default, or verbose messages #log_min_error_statement = error # Values in order of increasing severity: # debug5 # debug4 # debug3 # debug2 # debug1 # info # notice # warning # error # fatal # panic (effectively off) log_min_duration_statement = 10000 # -1 is disabled, 0 logs all statements # and their durations. #silent_mode = off # DO NOT USE without syslog or # redirect_stderr # (change requires restart) # - What to Log - #debug_print_parse = off #debug_print_rewritten = off #debug_print_plan = off #debug_pretty_print = off #log_connections = off #log_disconnections = off #log_duration = off #log_line_prefix = '' # Special values: # %u = user name # %d = database name # %r = remote host and port # %h = remote host # %p = PID # %t = timestamp (no milliseconds) # %m = timestamp with milliseconds # %i = command tag # %c = session id # %l = session line number # %s = session start timestamp # %x = transaction id # %q = stop here in non-session # processes # %% = '%' # e.g. '<%u%%%d> ' #log_statement = 'none' # none, ddl, mod, all #log_hostname = off #--------------------------------------------------------------------------- # RUNTIME STATISTICS #--------------------------------------------------------------------------- # - Query/Index Statistics Collector - #stats_command_string = on #update_process_title = on stats_start_collector = on # needed for block or row stats # (change requires restart) stats_block_level = on stats_row_level = on stats_reset_on_server_start = off # (change requires restart) # - Statistics Monitoring - #log_parser_stats = off #log_planner_stats = off #log_executor_stats = off #log_statement_stats = off #--------------------------------------------------------------------------- # AUTOVACUUM PARAMETERS #--------------------------------------------------------------------------- #autovacuum = off # enable autovacuum subprocess? # 'on' requires stats_start_collector # and stats_row_level to also be on #autovacuum_naptime = 1min # time between autovacuum runs #autovacuum_vacuum_threshold = 500 # min # of tuple updates before # vacuum #autovacuum_analyze_threshold = 250 # min # of tuple updates before # analyze #autovacuum_vacuum_scale_factor = 0.2 # fraction of rel size before # vacuum #autovacuum_analyze_scale_factor = 0.1 # fraction of rel size before # analyze #autovacuum_freeze_max_age = 200000000 # maximum XID age before forced vacuum # (change requires restart) #autovacuum_vacuum_cost_delay = -1 # default vacuum cost delay for # autovacuum, -1 means use # vacuum_cost_delay #autovacuum_vacuum_cost_limit = -1 # default vacuum cost limit for # autovacuum, -1 means use # vacuum_cost_limit #--------------------------------------------------------------------------- # CLIENT CONNECTION DEFAULTS #--------------------------------------------------------------------------- # - Statement Behavior - #search_path = '"$user",public' # schema names #default_tablespace = '' # a tablespace name, '' uses # the default #check_function_bodies = on #default_transaction_isolation = 'read committed' #default_transaction_read_only = off #statement_timeout = 0 # 0 is disabled #vacuum_freeze_min_age = 100000000 # - Locale and Formatting - datestyle = 'iso, mdy' #timezone = unknown # actually, defaults to TZ # environment setting #timezone_abbreviations = 'Default' # select the set of available timezone # abbreviations. Currently, there are # Default # Australia # India # However you can also create your own # file in share/timezonesets/. #extra_float_digits = 0 # min -15, max 2 #client_encoding = sql_ascii # actually, defaults to database # encoding # These settings are initialized by initdb -- they might be changed lc_messages = 'C' # locale for system error message # strings lc_monetary = 'C' # locale for monetary formatting lc_numeric = 'C' # locale for number formatting lc_time = 'C' # locale for time formatting # - Other Defaults - #explain_pretty_print = on #dynamic_library_path = '$libdir' #local_preload_libraries = '' #--------------------------------------------------------------------------- # LOCK MANAGEMENT #--------------------------------------------------------------------------- #deadlock_timeout = 1s #max_locks_per_transaction = 64 # min 10 # (change requires restart) # Note: each lock table slot uses ~270 bytes of shared memory, and there are # max_locks_per_transaction * (max_connections + max_prepared_transactions) # lock table slots. #--------------------------------------------------------------------------- # VERSION/PLATFORM COMPATIBILITY #--------------------------------------------------------------------------- # - Previous Postgres Versions - #add_missing_from = off #array_nulls = on #backslash_quote = safe_encoding # on, off, or safe_encoding #default_with_oids = off #escape_string_warning = on #standard_conforming_strings = off #regex_flavor = advanced # advanced, extended, or basic #sql_inheritance = on # - Other Platforms & Clients - #transform_null_equals = off #--------------------------------------------------------------------------- # CUSTOMIZED OPTIONS #--------------------------------------------------------------------------- #custom_variable_classes = '' # list of custom variable class names SELECT * FROM pg_stat_activity; datid | datname | procpid | usesysid | usename | current_query | waiting | query_start | backend_start | client_addr | client_port -------+---------+---------+----------+---------+---------------------------------+---------+-------------------------------+-------------------------------+-------------+------------- 16384 | hqdb | 3267 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.036781+01 | 2011-02-08 15:51:20.02413+01 | 127.0.0.1 | 47892 16384 | hqdb | 3268 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.050994+01 | 2011-02-08 15:51:20.047393+01 | 127.0.0.1 | 47893 16384 | hqdb | 3269 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.056661+01 | 2011-02-08 15:51:20.053201+01 | 127.0.0.1 | 47894 16384 | hqdb | 3271 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.062351+01 | 2011-02-08 15:51:20.058822+01 | 127.0.0.1 | 47895 16384 | hqdb | 3272 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.068328+01 | 2011-02-08 15:51:20.064517+01 | 127.0.0.1 | 47896 16384 | hqdb | 3273 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.07444+01 | 2011-02-08 15:51:20.070755+01 | 127.0.0.1 | 47897 16384 | hqdb | 3274 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.080941+01 | 2011-02-08 15:51:20.076983+01 | 127.0.0.1 | 47898 16384 | hqdb | 3275 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.08741+01 | 2011-02-08 15:51:20.083697+01 | 127.0.0.1 | 47899 16384 | hqdb | 3276 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:20.093597+01 | 2011-02-08 15:51:20.089977+01 | 127.0.0.1 | 47900 16384 | hqdb | 3277 | 10 | hqadmin | <IDLE> in transaction | f | 2011-02-08 15:51:20.133974+01 | 2011-02-08 15:51:20.096149+01 | 127.0.0.1 | 47901 16384 | hqdb | 3308 | 10 | hqadmin | <IDLE> | f | 2011-02-09 10:49:27.402197+01 | 2011-02-08 15:51:29.826321+01 | 127.0.0.1 | 47902 16384 | hqdb | 3309 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.572395+01 | 2011-02-08 15:51:29.865243+01 | 127.0.0.1 | 47903 16384 | hqdb | 3310 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.586273+01 | 2011-02-08 15:51:29.874346+01 | 127.0.0.1 | 47904 16384 | hqdb | 3311 | 10 | hqadmin | <IDLE> | f | 2011-02-09 10:10:03.024088+01 | 2011-02-08 15:51:29.883598+01 | 127.0.0.1 | 47905 16384 | hqdb | 3312 | 10 | hqadmin | <IDLE> in transaction | f | 2011-02-08 15:51:35.804457+01 | 2011-02-08 15:51:29.892925+01 | 127.0.0.1 | 47906 16384 | hqdb | 3418 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.580207+01 | 2011-02-08 15:51:55.56911+01 | 127.0.0.1 | 47910 16384 | hqdb | 3419 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.59781+01 | 2011-02-08 15:51:55.588609+01 | 127.0.0.1 | 47911 16384 | hqdb | 3422 | 10 | hqadmin | <IDLE> | f | 2011-02-09 10:10:02.668836+01 | 2011-02-08 15:51:55.603076+01 | 127.0.0.1 | 47914 16384 | hqdb | 3421 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.770427+01 | 2011-02-08 15:51:55.603086+01 | 127.0.0.1 | 47913 16384 | hqdb | 3420 | 10 | hqadmin | <IDLE> | f | 2011-02-08 15:51:55.680785+01 | 2011-02-08 15:51:55.637058+01 | 127.0.0.1 | 47912 16384 | hqdb | 18233 | 10 | hqadmin | SELECT * FROM pg_stat_activity; | f | 2011-02-09 10:49:29.688949+01 | 2011-02-09 10:48:13.031475+01 | | -1 (21 rows)

  Read the article

• Rename a Network Printer win Win 7

  - by Alex

  Seems this is a common question but the answers regularly miss the point. I have a server. Server has some printers connected. Server has all drivers for x32 & x64 OS PLUS ALL DEFAULTS set. Server also manages print queue. I have many workstations, all need to use the printers. All NEED to have drivers print queue and DEFAULTS propagated from server. Now.... When I add the printers on the workstations, I get: "ABC Printer on SERVER123" I need something less long - just "ABC Printer" So how? Tip: Please don't show me how to change the name of your locally installed printer. I know how to do this - I am particularly interested in shared printers that look like "ABC Printer on SERVER123" Tip: Installing the driver with a local port wont cut it because then I loose the server propagated defaults, the driver updates and I need to run around with driver disks/confuse trembling users with hard things like choosing drivers. I am happy for a hack if there is no official way to do this in the group policy.... I tried looking in HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Print\Printers on the workstation machines but those are only local printers :( I can see the network printer details on the workstations here: HKEY_USERS[Some GUID]\Printers\Connections But there is nothing obvious like a description string... Can anyone help with this?

  Read the article

• Package upgrade on Ubuntu raid server and grub setup issue

  - by RecNes

  I have remote Ubuntu 10.10 server running on raid system. I did package upgrade yesterday night for security reasons. During the upgrade, grub installation screen appeared and asked me which partition I wanted to install grub. Options are sda,sdb,md1 and md2. I decide to install them on both sda and sdb partitions. I wondering, was I make true decision? If machine get reboot is it can be boot up safely? You can find fdisk output and fstab mount points below: Fstab: proc /proc proc defaults 0 0 none /dev/pts devpts gid=5,mode=620 0 0 /dev/md0 none swap sw 0 0 /dev/md1 /boot ext3 defaults 0 0 /dev/md2 / ext3 defaults 0 0 Fdisk: Disk /dev/sda: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00029bb5 Device Boot Start End Blocks Id System /dev/sda1 1 262 2102562 fd Linux raid autodetect /dev/sda2 263 295 265072+ fd Linux raid autodetect /dev/sda3 296 91201 730202445 fd Linux raid autodetect Disk /dev/md0: 2152 MB, 2152923136 bytes 2 heads, 4 sectors/track, 525616 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md0 doesn't contain a valid partition table Disk /dev/md1: 271 MB, 271319040 bytes 2 heads, 4 sectors/track, 66240 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md1 doesn't contain a valid partition table Disk /dev/md2: 747.7 GB, 747727224832 bytes 2 heads, 4 sectors/track, 182550592 cylinders Units = cylinders of 8 * 512 = 4096 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Disk /dev/md2 doesn't contain a valid partition table Disk /dev/sdb: 750.2 GB, 750156374016 bytes 255 heads, 63 sectors/track, 91201 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00088969 Device Boot Start End Blocks Id System /dev/sdb1 1 262 2102562 fd Linux raid autodetect /dev/sdb2 263 295 265072+ fd Linux raid autodetect /dev/sdb3 296 91201 730202445 fd Linux raid autodetect

  Read the article

• GlusterFS is failing to mount on boot

  - by J. Pablo Fernández

  I'm running the official GlusterFS 3.5 packages on Ubuntu 12.04 and everything seems to be working fine, except mounting the GlusterFS volumes at boot time. This is what I see in the log files: [2014-06-13 08:52:28.139382] I [glusterfsd.c:1959:main] 0-/usr/sbin/glusterfs: Started running /usr/sbin/glusterfs version 3.5.0 (/usr/sbin/glusterfs --volfile-server=koraga --volfile-id=/private_uploads /var/www/shared/private/uploads) [2014-06-13 08:52:28.147186] I [socket.c:3561:socket_init] 0-glusterfs: SSL support is NOT enabled [2014-06-13 08:52:28.147237] I [socket.c:3576:socket_init] 0-glusterfs: using system polling thread [2014-06-13 08:52:28.148183] E [socket.c:2161:socket_connect_finish] 0-glusterfs: connection to 176.58.113.205:24007 failed (Connection refused) [2014-06-13 08:52:28.148236] E [glusterfsd-mgmt.c:1601:mgmt_rpc_notify] 0-glusterfsd-mgmt: failed to connect with remote-host: koraga (No data available) [2014-06-13 08:52:28.148251] I [glusterfsd-mgmt.c:1607:mgmt_rpc_notify] 0-glusterfsd-mgmt: Exhausted all volfile servers [2014-06-13 08:52:28.148477] W [glusterfsd.c:1095:cleanup_and_exit] (-->/usr/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_transport_notify+0x27) [0x7fe077f8e0f7] (-->/usr/lib/x86_64-linux-gnu/libgfrpc.so.0(rpc_clnt_notify+0x1a4) [0x7fe077f91cc4] (-->/usr/sbin/glusterfs(+0xcada) [0x7fe078655ada]))) 0-: received signum (1), shutting down [2014-06-13 08:52:28.148513] I [fuse-bridge.c:5444:fini] 0-fuse: Unmounting '/var/www/shared/private/uploads'. My fstab contains: proc /proc proc defaults 0 0 /dev/xvda / ext4 noatime,errors=remount-ro 0 1 /dev/xvdb none swap sw 0 0 /dev/xvdc /var/lib/glusterfs/brick01 ext4 defaults 1 2 koraga:/private_uploads /var/www/shared/private/uploads glusterfs defaults,_netdev 0 0 Any ideas what's going on and/or how to fix it?

  Read the article

• Can't Configure IBM 8275-416 Switch Via Serial

  - by Sean M

  I am attempting to configure an IBM 8275-416 switch (I found a manual here) via serial connection. However, when I connect with HyperTerminal, the output contains a lot of garbage characters. It's pretty much unusable, because there's enough layout-breaking text-gunk that it's very difficult to determine what's actually being displayed. . I was able to reset the switch to factory defaults via the terminal interface, so I know that it's not entirely broken. It also performs basic functions all right (i.e., you plug in clients and Ethernet cables - they can connect to clients plugged into other ports) - but I'd like it to do more than that (VLANs yay). I don't know if its in-band UI is operational or not, because I can't get the terminal interface to behave well enough to properly turn on the web/SNMP UI. So that's not available. Things I've tried: - Changing the encoding: HyperTerminal lets me choose between Standard JIS and Shift-JIS. Neither setting fixes the issue. - Checking emulation settings: The manual demands VT100, 19200 baud, 8 data bits, and such: I have faithfully applied these settings, both in HyperTerminal's settings and in the properties of the COM1 port in Device Manager (connecting from a Windows machine). - Restoring to factory defaults: See above. Things that it could be, but that seem unlikely: - Cabling: Couldn't find a proper null-modem cable, so used two 232-to-RJ45 adapters. But if it was a problem with the cable, wouldn't it be more likely to not connect or do input at all, rather than just garble the text? Since I was actually able to perform the reset-to-factory defaults operation, I don't think it's this. - Device as a whole broken: It is a decade and change old, so it's possible that it's just dying slowly. Again, though, it seems like there would be more symptoms than just garbled text in the terminal. What else can I try to get a sane interface to this switch?

  Read the article

• glusterfs mounts get unmounted when 1 of the 2 bricks goes offline

  - by Shiquemano

  I have an odd case where 1 of the 2 replicated glusterfs bricks will go offline and take all of the client mounts down with it. As I understand it, this should not be happening. It should fail over to the brick that is still online, but this hasn't been the case. I suspect that this is due to configuration issue. Here is a description of the system: 2 gluster servers on dedicated hardware (gfs0, gfs1) 8 client servers on vms (client1, client2, client3, ... , client8) Half of the client servers are mounted with gfs0 as the primary, and the other half are pointed at gfs1. Each of the clients are mounted with the following entry in /etc/fstab: /etc/glusterfs/datavol.vol /data glusterfs defaults 0 0 Here is the content of /etc/glusterfs/datavol.vol: volume datavol-client-0 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs0 end-volume volume datavol-client-1 type protocol/client option transport-type tcp option remote-subvolume /data/datavol option remote-host gfs1 end-volume volume datavol-replicate-0 type cluster/replicate subvolumes datavol-client-0 datavol-client-1 end-volume volume datavol-dht type cluster/distribute subvolumes datavol-replicate-0 end-volume volume datavol-write-behind type performance/write-behind subvolumes datavol-dht end-volume volume datavol-read-ahead type performance/read-ahead subvolumes datavol-write-behind end-volume volume datavol-io-cache type performance/io-cache subvolumes datavol-read-ahead end-volume volume datavol-quick-read type performance/quick-read subvolumes datavol-io-cache end-volume volume datavol-md-cache type performance/md-cache subvolumes datavol-quick-read end-volume volume datavol type debug/io-stats option count-fop-hits on option latency-measurement on subvolumes datavol-md-cache end-volume The config above is the latest attempt at making this behave properly. I have also tried the following entry in /etc/fstab: gfs0:/datavol /data glusterfs defaults,backupvolfile-server=gfs1 0 0 This was the entry for half of the clients, while the other half had: gfs1:/datavol /data glusterfs defaults,backupvolfile-server=gfs0 0 0 The results were exactly the same as the above configuration. Both configs connect everything just fine, they just don't fail over. Any help would be appreciated.

  Read the article

• SqlCommandBuilder.DeriveParameters(command) and IsNullable

  - by Andrey

  I have written an O/R database wrapper that generates some wrapper methods for stored procs it reads from the database. Now I need to produce some custom wrapper code if an input parameter of a stored proc is defaulted to NULL. The problem is - I get stored proc parameters using: SqlCommandBuilder.DeriveParameters(command) and it doesn't bring parameter defaults. Is there any way to look up those defaults? Are they stored anywhere in the database? BTW, I'm using SQL Server 2008

  Read the article

• NSUserDefaults always returns 0, in Simulator and Device

  - by joec

  I have a settings bundle in my iPhone app, with the following PList: Type: PSMultiValueSpecifier Title: Within (Kilometres) DefaultValue: Number: 1 Titles: Array: Item 1: Number: 1 Item 2: Number: 2 Values: Array: Item 1: Number: 1 Item 2: Number: 2 Key: String: km Then in my code i have: NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults]; NSInteger choiceOne = [defaults integerForKey:@"km"]; choiceOne is always 0. What am i doing wrong? Thanks

  Read the article

• SqlCommandBuilder.DeriveParameters(command) and IsNullable

  - by Andrey

  I have written an O/R database wrapper that generates some wrapper methods for stored procs it reads from the database. Now I need to produce some custom wrapper code if an input parameter of a stored proc is defaulted to NULL. The problem is - I get stored proc parameters using: SqlCommandBuilder.DeriveParameters(command) and it doesn't bring parameter defaults. Is there any way to look up those defaults? Are they stored anywhere in the database? BTW, I'm using SQL Server 2008

  Read the article

• Symfony 2.0 - routing

  - by Agares

  Hi! How can I set up routing in symfony to be like that(if one rule won't work, next should be grabbed): /controller/action/param/param/param/... /admin/controller/action/param/param/param/... ("admin" is constant here - name of the bundle) I tried that: homepage: pattern: / defaults: { _bundle: HelloBundle, _controller: Hello, _action: index } default: pattern: /:controller/:action/* defaults: { _bundle: HelloBundle } But it doesn't work, even for the first rule. Sorry for my English, and thanks for any future help ;.

  Read the article

• Javascript: previous property is undefined

  - by Matrym

  Why is it saying that "lbp is undefined" on the line of "creditText"? How do I refer to previous properties in a config file such as this? var lbp = { // Pertinant page properties, such as Author, Keywords, URL or Title page: { theURL: window.location.toString(), }, // Configurable user defaults defaults: { creditText: lbp.page.theURL } } Thanks in advance for your help

  Read the article

• jquery thickbox height problem

  - by Swami

  My thickbox renders correctly in my dev environment, but in prod, the default height kicks in even though I'm supplying width and height params. TB_WIDTH = (params['width']*1) + 30 || 630; //defaults to 630 if no paramaters were added to URL TB_HEIGHT = (params['height']*1) + 40 || 440; //defaults to 440 if no paramaters were added to URL ajaxContentW = TB_WIDTH - 30; ajaxContentH = TB_HEIGHT - 45; Any thoughts on why this might be happening?

  Read the article

• Release Quickie

  - by Meltemi

  How to succinctly handle this situation. I'm not properly releasing contactDictionary in the if statement... NSNumber *pIDAsNumber; ... NSMutableDictionary *contactDictionary = [NSMutableDictionary dictionaryWithDictionary:[defaults dictionaryForKey:kContactDictionary]]; if (!contactDictionary) { contactDictionary = [[NSMutableDictionary alloc] initWithCapacity:1]; } [contactDictionary setObject:pIDAsNumber forKey:[myClass.personIDAsNumber stringValue]]; [defaults setObject:contactDictionary forKey:kContactDictionary];

  Read the article

• How to save Application State using NSUserDefaults in iPhone?

  - by keith

  Hello Everyone, Following is what i am doing: - (void) applicationWillTerminate: (UIApplication*) application { NSUserDefaults *defaults = [NSUserDefaults standardUserDefaults]; [defaults setObject:navigationController.viewControllers forKey:@"diabetesstate"]; } - (void) applicationDidFinishLaunching: (UIApplication*) application { NSMutableArray *state = [[NSUserDefaults standardUserDefaults] objectForKey:@"diabetesstate"]; if (state == nil) { //Will initialize a new controller and put it as root view controller } else { [navigationController setViewControllers:state animated:NO]; } }

  Read the article

• Default js included in Rails

  - by hizki

  When creating a new Rails application, it is automatically supplied with several quite large js files. In the application layout, by default, all of them are loaded into the page: <%= javascript_include_tag :defaults %> I was wondering, isn't loading all those javascripts can make the site possibly mush slower? And if so, where can I change the definition of :defaults? Or should I just include the ones I need and remove the code line mentioned above? Thank you

  Read the article

• Diferent default remote for git pull and git push

  - by svick

  Is there a way to set up a git repository, so that git pull defaults to one remote and git push defaults to another? I know I can set both by changing the value of the remote variable in branch section of .git/config, but how to do it for each direction separately?

  Read the article

• Does anyone know how to turn off anti-aliasing for the text editor in Flash Builder?

  - by eco_bach

  Does anyone know how to turn off anti-aliasing for the text editor in Flash Builder on the Mac? For Flex Builder I was able to do this via the terminal using the following defaults write com.adobe.flexbuilder AppleAntiAliasingThreshold 20 defaults write com.adobe.flexbuilder AppleSmoothFixedFontsSizeThreshold 20

  Read the article

• error in c, but not in c++

  - by eswar

  const int t=5; char buf[t+5]; When I compile this gives error in C but not in C++!! Can anybody please explain me the reason? Note: I know the const defaults to internal linkage in 'C++', where as in 'C' it defaults to external linkage. Does it has any relation to the above case??

  Read the article

• How to make a dump of the current NSUserDefaults standardUserDefaults state to disk and read back in

  - by mystify

  I want to have some way of backing up the user defaults to a property list or XML, or some other appropriate file format that can be transfered over the net. How could I get a backup of these so that I can send them to a webserver and retrieve them back to the device and read them in to the user defaults database?

  Read the article

• Capistrano asks for SSH password when deploying from local machine to server

  - by GhostRider

  When I try to ssh to a server, I'm able to do it as my id_rsa.pub key is added to the authorized keys in the server. Now when I try to deploy my code via Capistrano to the server from my local project folder, the server asks for a password. I'm unable to understand what could be the issue if I'm able to ssh and unable to deploy to the same server. $ cap deploy:setup "no seed data" triggering start callbacks for `deploy:setup' * 13:42:18 == Currently executing `multistage:ensure' *** Defaulting to `development' * 13:42:18 == Currently executing `development' * 13:42:18 == Currently executing `deploy:setup' triggering before callbacks for `deploy:setup' * 13:42:18 == Currently executing `db:configure_mongoid' * executing "mkdir -p /home/deploy/apps/development/flyingbird/shared/config" servers: ["dev1.noob.com", "176.9.24.217"] Password: Cap script: # gem install capistrano capistrano-ext capistrano_colors begin; require 'capistrano_colors'; rescue LoadError; end require "bundler/capistrano" # RVM bootstrap # $:.unshift(File.expand_path('./lib', ENV['rvm_path'])) require 'rvm/capistrano' set :rvm_ruby_string, 'ruby-1.9.2-p290' set :rvm_type, :user # or :user # Application setup default_run_options[:pty] = true # allow pseudo-terminals ssh_options[:forward_agent] = true # forward SSH keys (this will use your SSH key to get the code from git repository) ssh_options[:port] = 22 set :ip, "dev1.noob.com" set :application, "flyingbird" set :repository, "repo-path" set :scm, :git set :branch, fetch(:branch, "master") set :deploy_via, :remote_cache set :rails_env, "production" set :use_sudo, false set :scm_username, "user" set :user, "user1" set(:database_username) { application } set(:production_database) { application + "_production" } set(:staging_database) { application + "_staging" } set(:development_database) { application + "_development" } role :web, ip # Your HTTP server, Apache/etc role :app, ip # This may be the same as your `Web` server role :db, ip, :primary => true # This is where Rails migrations will run # Use multi-staging require "capistrano/ext/multistage" set :stages, ["development", "staging", "production"] set :default_stage, rails_env before "deploy:setup", "db:configure_mongoid" # Uncomment if you use any of these databases after "deploy:update_code", "db:symlink_mongoid" after "deploy:update_code", "uploads:configure_shared" after "uploads:configure_shared", "uploads:symlink" after 'deploy:update_code', 'bundler:symlink_bundled_gems' after 'deploy:update_code', 'bundler:install' after "deploy:update_code", "rvm:trust_rvmrc" # Use this to update crontab if you use 'whenever' gem # after "deploy:symlink", "deploy:update_crontab" if ARGV.include?("seed_data") after "deploy", "db:seed" else p "no seed data" end #Custom tasks to handle resque and redis restart before "deploy", "deploy:stop_workers" after "deploy", "deploy:restart_redis" after "deploy", "deploy:start_workers" after "deploy", "deploy:cleanup" 'Create symlink for public uploads' namespace :uploads do task :symlink do run <<-CMD rm -rf #{release_path}/public/uploads && mkdir -p #{release_path}/public && ln -nfs #{shared_path}/public/uploads #{release_path}/public/uploads CMD end task :configure_shared do run "mkdir -p #{shared_path}/public" run "mkdir -p #{shared_path}/public/uploads" end end namespace :rvm do desc 'Trust rvmrc file' task :trust_rvmrc do run "rvm rvmrc trust #{current_release}" end end namespace :db do desc "Create mongoid.yml in shared path" task :configure_mongoid do db_config = <<-EOF defaults: &defaults host: localhost production: <<: *defaults database: #{production_database} staging: <<: *defaults database: #{staging_database} EOF run "mkdir -p #{shared_path}/config" put db_config, "#{shared_path}/config/mongoid.yml" end desc "Make symlink for mongoid.yml" task :symlink_mongoid do run "ln -nfs #{shared_path}/config/mongoid.yml #{release_path}/config/mongoid.yml" end desc "Fill the database with seed data" task :seed do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake db:seed" end end namespace :bundler do desc "Symlink bundled gems on each release" task :symlink_bundled_gems, :roles => :app do run "mkdir -p #{shared_path}/bundled_gems" run "ln -nfs #{shared_path}/bundled_gems #{release_path}/vendor/bundle" end desc "Install bundled gems " task :install, :roles => :app do run "cd #{release_path} && bundle install --deployment" end end namespace :deploy do task :start, :roles => :app do run "touch #{current_path}/tmp/restart.txt" end desc "Restart the app" task :restart, :roles => :app do run "touch #{current_path}/tmp/restart.txt" end desc "Start the workers" task :stop_workers do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake resque:stop_workers" end desc "Restart Redis server" task :restart_redis do "/etc/init.d/redis-server restart" end desc "Start the workers" task :start_workers do run "cd #{current_path}; RAILS_ENV=#{default_stage} bundle exec rake resque:start_workers" end end

  Read the article

• How to load the environment variables at boot time before X11 on Ubuntu Precise?

  - by Fnux

  Using Ubuntu Precise 64 bit, I'm facing a problem that I'm unable to solve and that I'll try to describe below: I'm using a console mode program (let's say abc) that uses Go, NodeJS, Java and Scala. In order for abc to work with these languages, I've to declare the following statements: a) within /etc/environment: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar b) within /etc/login.defs ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin c) a) within /etc/sudoers: `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin"` Then, when I start abc from a terminal, all is fine and I can use any of the 4 languages described above. However, if I put a script within /etc/init.d that starts abc during the boot process (i.e. before to start the GUI), using Java from abc still is fine, but using Go, NodeJS or Scala doesn't work anymore. Then, I guess that during the boot process, the script within /etc/init.d that starts abc is executed before that the different environment variables set within /etc/sudoers, /etc/environment and /etc/login.defs are loaded. So, my question is: how to force the environment variables to be loaded before that my script starting abc is launched? Any help and advice on this topic would be trully appreciated. TIA. Cheers. Thanks again to Mark and Danila. Below is the current "abc" script file that I put within /etc/init.d `#! /bin/sh ### EDIT: ADD THIS VARS DEFINITIONS: PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar "ENV_SUPATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "ENV_PATH PATH"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" "Defaults secure_path"="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ##### EXPORT this VARS so they are accessible to children:" export "PATH" "CLASSPATH" "ENV_SUPATH PATH" "ENV_PATH PATH" "Defaults secure_path" `### BEGIN INIT INFO `# Provides: abc `# Required-Start: $remote_fs $syslog `# Required-Stop: $remote_fs $syslog `# Default-Start: 2 3 4 5 `# Default-Stop: 0 1 6 `# Short-Description: abc initscript `# Description: This iniscript starts and stops abc `### END INIT INFO `# Author: Fnux, fnux.fl at gmail dot com `# Version: 1.2 `# Note: (edit ABC_PATH if abc isn't installed in /opt/abc) NAME=abc ABC_PATH=/opt/abc START="-d" STOP="-k" VERSION="-v" SCRIPTNAME=/etc/init.d/$NAME STARTMESG="\nStarting abc in deamon mode." UPMESG="\n$NAME is running." DOWNMESG="\n$NAME is not running." STATUS=`pidof $NAME` `# Exit if abc is not installed [ -x "$ABC_PATH/$NAME" ] || exit 0 case "$1" in start) echo $STARTMESG cd $ABC_PATH ./$NAME $START ;; stop) cd $ABC_PATH ./$NAME $STOP ;; status) if [ "$STATUS" > 0 ] ; then echo $UPMESG else echo $DOWNMESG fi ;; restart) cd $ABC_PATH ./$NAME $STOP echo $STARTMESG ./$NAME $START ;; version) cd $ABC_PATH ./$NAME $VERSION ;; *) echo "Usage: $SCRIPTNAME {start|status|restart|stop|version}" >&2 exit 3 ;; esac : So, where and how should I write the needed environment variables for: a) Go needs the following statements (ie: PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin" ENV_SUPATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin ENV_PATH PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin `# env_reset Defaults secure_path="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/local/go/bin") b) and Scala needs this one: (ie CLASSPATH=$CLASSPATH:/usr/share/java/scala-library.jar). TIA for an explanation how to do so. Cheers.

  Read the article

• bluetooth not working on Ubuntu 13.10

  - by iacopo

  I upgrated ubuntu from 13.4 to 13.10 and my bluetooth stopped working. When I open bluetooth I'm able to put it ON but the visibility doesn't show anything and didn't detect any device. when I: dmesg | grep Blue [ 2.046249] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.046252] usb 3-1: Manufacturer: Bluetooth v2.0 [ 15.255710] Bluetooth: Core ver 2.16 [ 15.255748] Bluetooth: HCI device and connection manager initialized [ 15.255759] Bluetooth: HCI socket layer initialized [ 15.255765] Bluetooth: L2CAP socket layer initialized [ 15.255776] Bluetooth: SCO socket layer initialized [ 20.110379] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.110386] Bluetooth: BNEP filters: protocol multicast [ 20.110400] Bluetooth: BNEP socket layer initialized [ 20.120635] Bluetooth: RFCOMM TTY layer initialized [ 20.120656] Bluetooth: RFCOMM socket layer initialized [ 20.120660] Bluetooth: RFCOMM ver 1.11 when I digit: lsusb Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 002: ID 0bc2:2300 Seagate RSS LLC Expansion Portable Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 006 Device 002: ID 0e6a:6001 Megawin Technology Co., Ltd GEMBIRD Flexible keyboard KB-109F-B-DE Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 002: ID 13ee:0001 MosArt Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 003 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd Bluetooth Dongle (HCI mode) Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub when I: hciconfig -a hci0: Type: BR/EDR Bus: USB BD Address: 00:1B:10:00:2A:EC ACL MTU: 1017:8 SCO MTU: 64:0 DOWN RX bytes:457 acl:0 sco:0 events:16 errors:0 TX bytes:68 acl:0 sco:0 commands:16 errors:0 Features: 0xff 0xff 0x8d 0xfe 0x9b 0xf9 0x00 0x80 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: Link mode: SLAVE ACCEPT when I digit: rfkill list 0: phy0: Wireless LAN Soft blocked: yes Hard blocked: no 1: hci0: Bluetooth Soft blocked: no Hard blocked: no when I digit: sudo gedit /etc/bluetooth/main.conf [General] # List of plugins that should not be loaded on bluetoothd startup #DisablePlugins = network,input # Default adaper name # %h - substituted for hostname # %d - substituted for adapter id Name = %h-%d # Default device class. Only the major and minor device class bits are # considered. Class = 0x000100 # How long to stay in discoverable mode before going back to non-discoverable # The value is in seconds. Default is 180, i.e. 3 minutes. # 0 = disable timer, i.e. stay discoverable forever DiscoverableTimeout = 0 # How long to stay in pairable mode before going back to non-discoverable # The value is in seconds. Default is 0. # 0 = disable timer, i.e. stay pairable forever PairableTimeout = 0 # Use some other page timeout than the controller default one # which is 16384 (10 seconds). PageTimeout = 8192 # Automatic connection for bonded devices driven by platform/user events. # If a platform plugin uses this mechanism, automatic connections will be # enabled during the interval defined below. Initially, this feature # intends to be used to establish connections to ATT channels. AutoConnectTimeout = 60 # What value should be assumed for the adapter Powered property when # SetProperty(Powered, ...) hasn't been called yet. Defaults to true InitiallyPowered = true # Remember the previously stored Powered state when initializing adapters RememberPowered = false # Use vendor id source (assigner), vendor, product and version information for # DID profile support. The values are separated by ":" and assigner, VID, PID # and version. # Possible vendor id source values: bluetooth, usb (defaults to usb) #DeviceID = bluetooth:1234:5678:abcd # Do reverse service discovery for previously unknown devices that connect to # us. This option is really only needed for qualification since the BITE tester # doesn't like us doing reverse SDP for some test cases (though there could in # theory be other useful purposes for this too). Defaults to true. ReverseServiceDiscovery = true # Enable name resolving after inquiry. Set it to 'false' if you don't need # remote devices name and want shorter discovery cycle. Defaults to 'true'. NameResolving = true # Enable runtime persistency of debug link keys. Default is false which # makes debug link keys valid only for the duration of the connection # that they were created for. DebugKeys = false # Enable the GATT functionality. Default is false EnableGatt = false when I digit: dmesg | grep Bluetooth [ 2.013041] usb 3-1: Product: Bluetooth V2.0 Dongle [ 2.013049] usb 3-1: Manufacturer: Bluetooth v2.0 [ 13.798293] Bluetooth: Core ver 2.16 [ 13.798338] Bluetooth: HCI device and connection manager initialized [ 13.798352] Bluetooth: HCI socket layer initialized [ 13.798357] Bluetooth: L2CAP socket layer initialized [ 13.798368] Bluetooth: SCO socket layer initialized [ 20.184162] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 20.184173] Bluetooth: BNEP filters: protocol multicast [ 20.184197] Bluetooth: BNEP socket layer initialized [ 20.238947] Bluetooth: RFCOMM TTY layer initialized [ 20.238983] Bluetooth: RFCOMM socket layer initialized [ 20.239018] Bluetooth: RFCOMM ver 1.11 When I digit: uname -a Linux casa-desktop 3.11.0-13-generic #20-Ubuntu SMP Wed Oct 23 07:38:26 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux When I digit: lsmod Module Size Used by parport_pc 32701 0 rfcomm 69070 4 bnep 19564 2 ppdev 17671 0 ip6t_REJECT 12910 1 xt_hl 12521 6 ip6t_rt 13507 3 nf_conntrack_ipv6 18938 9 nf_defrag_ipv6 34616 1 nf_conntrack_ipv6 ipt_REJECT 12541 1 xt_LOG 17718 8 xt_limit 12711 11 xt_tcpudp 12884 32 xt_addrtype 12635 4 nf_conntrack_ipv4 15012 9 nf_defrag_ipv4 12729 1 nf_conntrack_ipv4 xt_conntrack 12760 18 ip6table_filter 12815 1 ip6_tables 27025 1 ip6table_filter nf_conntrack_netbios_ns 12665 0 nf_conntrack_broadcast 12589 1 nf_conntrack_netbios_ns nf_nat_ftp 12741 0 nf_nat 26653 1 nf_nat_ftp kvm_amd 59958 0 nf_conntrack_ftp 18608 1 nf_nat_ftp kvm 431315 1 kvm_amd nf_conntrack 91736 8 nf_nat_ftp,nf_conntrack_netbios_ns,nf_nat,xt_conntrack,nf_conntrack_broadcast,nf_conntrack_ftp,nf_conntrack_ipv4,nf_conntrack_ipv6 iptable_filter 12810 1 crct10dif_pclmul 14289 0 crc32_pclmul 13113 0 ip_tables 27239 1 iptable_filter snd_hda_codec_realtek 55704 1 ghash_clmulni_intel 13259 0 aesni_intel 55624 0 aes_x86_64 17131 1 aesni_intel snd_hda_codec_hdmi 41117 1 x_tables 34059 13 ip6table_filter,xt_hl,ip_tables,xt_tcpudp,xt_limit,xt_conntrack,xt_LOG,iptable_filter,ip6t_rt,ipt_REJECT,ip6_tables,xt_addrtype,ip6t_REJECT lrw 13257 1 aesni_intel snd_hda_intel 48171 5 gf128mul 14951 1 lrw glue_helper 13990 1 aesni_intel ablk_helper 13597 1 aesni_intel joydev 17377 0 cryptd 20329 3 ghash_clmulni_intel,aesni_intel,ablk_helper snd_hda_codec 188738 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel arc4 12608 2 snd_hwdep 13602 1 snd_hda_codec rt2800pci 18690 0 snd_pcm 102033 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel radeon 1402449 3 rt2800lib 79963 1 rt2800pci btusb 28267 0 rt2x00pci 13287 1 rt2800pci rt2x00mmio 13603 1 rt2800pci snd_page_alloc 18710 2 snd_pcm,snd_hda_intel rt2x00lib 55238 4 rt2x00pci,rt2800lib,rt2800pci,rt2x00mmio snd_seq_midi 13324 0 mac80211 596969 3 rt2x00lib,rt2x00pci,rt2800lib snd_seq_midi_event 14899 1 snd_seq_midi ttm 83995 1 radeon snd_rawmidi 30095 1 snd_seq_midi cfg80211 479757 2 mac80211,rt2x00lib drm_kms_helper 52651 1 radeon snd_seq 61560 2 snd_seq_midi_event,snd_seq_midi bluetooth 371880 12 bnep,btusb,rfcomm microcode 23518 0 eeprom_93cx6 13344 1 rt2800pci snd_seq_device 14497 3 snd_seq,snd_rawmidi,snd_seq_midi crc_ccitt 12707 1 rt2800lib snd_timer 29433 2 snd_pcm,snd_seq snd 69141 21 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_rawmidi,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_seq_midi psmouse 97626 0 drm 296739 5 ttm,drm_kms_helper,radeon k10temp 13126 0 soundcore 12680 1 snd serio_raw 13413 0 i2c_algo_bit 13413 1 radeon i2c_piix4 22106 0 video 19318 0 mac_hid 13205 0 lp 17759 0 parport 42299 3 lp,ppdev,parport_pc hid_generic 12548 0 usbhid 53014 0 hid 105818 2 hid_generic,usbhid pata_acpi 13038 0 usb_storage 62062 1 r8169 67341 0 sdhci_pci 18985 0 sdhci 42630 1 sdhci_pci mii 13934 1 r8169 pata_atiixp 13242 0 ohci_pci 13561 0 ahci 25819 2 libahci 31898 1 ahci Someone can help me?

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >