Search Results

Search found 28951 results on 1159 pages for 'display mode'.

Page 9/1159 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• Is USB supported in safe mode on XP?

  - by Hugh Allen

  According Microsoft, "Universal Serial Bus Devices Do Not Work in Safe Mode" under XP. However, in my testing this is incorrect. USB keyboards, mice and flash drives seem to work fine in safe mode (I made sure the BIOS was not providing support). This makes sense because a failure of a standard input device would be, in Microsoft parlance, a "bad user experience". So, Is USB supported in safe mode on XP? If your answer is no (agreeing with Microsoft), please provide a test case, preferably in a virtual machine, where a standard HID keyboard or mouse fails. Please state hardware / BIOS / OS configuration. Note that you will need a PS/2 keyboard attached in addition to your USB device(s) in order to use the boot menu. Virtual machine software usually emulates a PS/2 keyboard. Alternatively, you could add the /safeboot switch to boot.ini. If your answer is yes, please provide a link to some supporting documentation (either from Microsoft or someone authoritative). Your answer might be "devices X, Y and Z are supported but nothing else", in which case also give a link.

  Read the article

• emacs ORG-mode "headless" export-as commands?

  - by Seamus

  When I use org-export-as-latex or org-export-as-html orgmode turns my buffer into a .tex file or .html file. But I don't want all the extra junk that it adds to the file: I want to handle the documentclass and everything myself and just \input the org mode generated file. (Or the analogous things for html with php). So if my org file just has: * Section - Stuff - Things I want the org mode command to output just \section{Section} \begin{itemize} \item Stuff \item Things \end{itemize} Without any of the extra \tableofcontents junk that ORG adds to it. I know I could define my own kind of #+LaTeX_CLASS that could add the packages I want and so on, but I don't want to do things that way (and that wouldn't remove the \maketitle or the spurious \vspace* that ORG insists on inserting. Is there a command to do this "headless" parsing and converting? I had a look but it's not obvious from the documentation. Presumably some low level ORG command is doing the parsing and converting I want, but I couldn't find what it was called from looking at the docs and C-h pages... This is not a question about HTML or LaTeX but about emacs ORG mode. So don't kick it off to some other site...

  Read the article

• HP Pavilion dv3 volume control display driver on Windows 7

  - by Farinha

  I've recently bought an HP Pavilion dv3-2150ep and I'm having a hard time getting the volume control display to work as expected. The control is a back-lit touch-sensitive bar above the keyboard. Now the buttons to turn the volume up and down actually do it, but the lightning is not changing at all. The mute button does change color when toggled. I'm not sure if I'm missing any drivers here (I've installed all of those on the HP support page that seem to have something to do with sound and/or display) or if I have to activate this somewhere. Any ideas?

  Read the article

• 59 vs 60 hertz on external display via DisplayPort

  - by Shiki

  Don't know if this is a really specific question or you'll help me out. Please do. I just bought a DeLock DisplayPort cable for my Lenovo T500. Tried to use it with the in-built Intel MHD4500, no use. With the ATI HD3650 (you can switch between the two vga on this machine) I get a normal picture, but only on 59hz. On 60 I get a smaller desktop size (strange). Any idea what can cause this? Will I have any problem if I use the 59hz? (Was using the display with a VGA cable but I get a blurry picture with that (dont matter what device I attach, VGA is like this on this display) and thats why I wanted to change.)

  Read the article

• Dell 620 display is too bright to use

  - by keith

  I have a Dell D620 with a display problem. In windows 7 the display seems to be too bright, the text is broken up, the only way to see the mouse is at a very oblique angle. Changing the brightness with fn and brightness control has little/no effect. When I put it in high contrast mode I can see all the colors, but any windows pictures etc are still useless. I cannot get it to connect to an external monitor via VGA port or via a USB-VGA connector.

  Read the article

• Have 3 Monitors Display the same thing? (WinXP)

  - by Drew Tenenbaum

  I have a setup in which there is a Computer running windows XP, with 3 monitors plugged into it, with a "Matrox Millennium P750" Graphics card. What I want is to enable mirroring of ALL THREE MONITORS, meaning I want all the monitors to display the same image. In Matrox Powerdesk, it does not have an option to do this, and I'm pretty sure that Windows XP does not support it nativley. I really should only need some software/drivers, right? What can i do to display the same thing on 3 screens?

  Read the article

• Compaq Q2009 monitor display Issues

  - by jasonco

  I have this compaq q2009 monitor 20' inches and I am having display issues. When I turn on the computer the image is displayed fine for a fraction of a second and then the display goes black. If I turn off the monitor and turn it on again the the same thing happens: the image is displayed for a fraction of a second and then goes black. This is odd. I've looked all over the web and I haven't found anything useful (not even in the HP website). So there is no "out of range" or "recommended resolution" message. It just displays and then goes black. I think the resolution is fine because it was working OK until recently and I haven't changed anything in that regard. Any help would be appreciated. Thanks.

  Read the article

• Connect Lenovo Thinkpad Edge e120 to WQHD display (such as Dell U2711) through HDMI

  - by Fulvio

  On paper, the HDMI version of the Lenovo Thinkpad Edge e120 is 1.3, which supports WQHD. Does it actually work? I want to connect the e120 to a WQHD display, such as the Dell U2711 or an Apple Cinema Display. I run Windows 7 Ultimate and latest drivers. The e120 I think has the Intel HD Graphics 3000 onboard chipset. I don't have the chance to test out the e120 with neither of these displays, so I'm seeking for an opinion from those who have tried. Thank you

  Read the article

• Adding a CRT display to my HP Mini laptop

  - by Ritwik G

  I tried to add a CRT display to my HP Mini. Here are the details : This is where I thought the display plug must be inserted. This is what the plug looks like: (Please tell me what this thing is actually called. I am pretty sure it is not called a plug. lol) This is where the above plug usually goes into my desktop CPU : Details of my CPU monitor, which I am trying to connect : It did not work :( You can see it not working below: (Yes, the CRT Monitor was switched on) Can this ever work ? How to make this work ?

  Read the article

• "Fuzzy" Display Problems on New OpenSUSE 11.3 Install

  - by Kryten

  Hi, I have a old Desktop that has a new installation of OpenSUSE 11.3 on it. To get straight to the point, whenever I try to start-up OpenSUSE, my display goes "fuzzy" (almost like a badly tuned TV) and sometimes (not always) my monitor goes black and says "Out of Range: 15.6kHz/49Hz": I assumed that this was a driver problem, so I download the drivers from nvidia and ran the shell script, completed and rebooted. Then OpenSUSE failed to boot with something like "nscd failed to start". At that point I decided to re-install and I did, but this time I tried un-checking "Automatic Configuration" to see if that helped. Got through the install and still have a problem. Unfortunately, my Linux troubleshooting skills are non-existent, so has anyone got any ideas on what could be the problem (is it the display driver?) and how I can fix the problem?

  Read the article

• Determine display or VNC session based on PID

  - by Daniel Kessler

  I frequently VNC into a server where we run many concurrent computationally intensive matlab processes. Sometimes, one of my processes misbehave, which I can see from top, but I have a hard time figuring out which VNC session it's running on, or more specifically, which display it's running on. Suppose I see that PID 8536 looks like a resource hog, and I want to investigate. Because it's a matlab session, I know there is likely an IDE open somewhere, and I want to check to see if anything important is happening before I kill it. We've solved this somewhat awkwardly in the past by identifying which PTY 8536 was launched from, then looking at a process tree to figure out things launched in that context, scrolling up, and seeing the VNC initialization. Seems like there must be a better way to go PID - X Display (or VNC Session).

  Read the article

• $DISPLAY dependent gtk themes

  - by Vlad Seghete

  I have a computer at home that I log into remotely. The "monitor" for it is a TV, so I want gtk applications to use a large font and icon theme, which I managed to do by editing the ~/.gtkrc-2.0 file and some other similar stuff. What I want to be able to do is have a separate theme for when I'm logging in remotely. The best way to explain is that I would like my gtk theme choice to be dependent on the X display that the application is started on. For example, if I start something on :0.0 then that is the TV and I want large fonts, but if I start it on localhost:10.0 I want to use a regular size font, because it will get rendered on my laptop screen. The elegant solution would be to have some sort of IF statement in the .gtkrc-2.0 file that checks the $DISPLAY variable and behaves accordingly. The problem is I can't find any documentation on control structures in .gktrc files, or if it's even possible to do that.

  Read the article

• HP Pavilion dv3 volume control display driver on Windows 7

  - by Farinha

  I've recently bought an HP Pavilion dv3-2150ep and I'm having a hard time getting the volume control display to work as expected. The control is a back-lit touch-sensitive bar above the keyboard. Now the buttons to turn the volume up and down actually do it, but the lightning is not changing at all. The mute button does change color when toggled. I'm not sure if I'm missing any drivers here (I've installed all of those on the HP support page that seem to have something to do with sound and/or display) or if I have to activate this somewhere. Any ideas?

  Read the article

• Iverter, inverter cable, or a display cable?

  - by krebshack

  I was recently hired at a small repair shop. I work indoors while my boss does on site calls for small businesses. I have to troubleshoot and fix laptop screens a few times a week and this is why I'm posting this question. I'm having trouble figuring out how to stream line the troubleshooting process. For example, how do I determine whether the inverter is broken while also determining that the inverter cable is not. How can I quickly decide that the inverter cable is broken while knowing that the inverter is most likely not broke. Or how do I know that it's just the display cable? It seems like this is a good way to approach things: "It could be the inverter, backlight, or the LCD panel itself. Backlight failure is usually hinted at by a pink hue to everything. Inverter failure usually results in the dimming of images on the screen to the point where the backlight is not even on (the inverter provides power to the backlight)" Source. While remembering that things "like flickering, screen freeze in dark image and [a] corner starts to get brighter" point to a "failure in the LCD panel itself, though it could just as easily be a loose data cable connected to the back of the LCD." Source. In short, I'm soliciting advice that anyone might have on how to quickly make the best decision about what's causing problems with laptops display. Thank you.

  Read the article

• XP Mode in Windows 7 professional recently ceased to work

  - by Ian FLetcher

  I have used Windows XP Mode in Windows Professional 7 once a week for around 2 years to run Quicken 98. About 2 weeks ago the XP Mode completely stopped working. I get different responses when I try to launch. I can sometimes see a launch screen for XP (which I never used to get) which then hangs Sometimes I just get a black screen Sometimes I get an error message in a cmd like interface that says "windows could not start because the following file is missing or corrupt \system32\ntoskrnl.exe please reinstall a copy of the above file. I have noticed that in the tools tab at the top of the screen "enable integration features" is greyed out. Any recommendations? Ian

  Read the article

• x display problems in centos 5.5

  - by John Ruiz

  I have a Dell E510 desktop with a geForce 7200 instead of the ATI x600 it came with. I have attempted to install CentOS 5.4 x86_64 (DVD), CentOS 5.5 (net install), and CentOS 5.5 x86_64 (DVD). Gnome desktop. All of these run into the same issue. When I put the DVD into the machine and reboot, the installer begins and I select "graphical install". I see text that say anaconda is starting, and then my screen goes nuts. It's not black, but rather a screen full of diagonal stripes or multiple colors. So I attempted to do a text install of CentOS 5.5 (DVD) and got it installed. When I booted for the first time, I logged into the virtual console and started X (startx). The desktop came up and it already had the display properties GUI up. I changed it from 800x600 to 1680x1050, saw that there were updates available, installed them, and then rebooted. When I start X from the virtual console this time, I get exactly the same display problem as I described before. Does anyone know what might be causing this and what I can do about it? edit: I should also mention that I'm capable of installing Windows 7 and Ubuntu 10.04 onto this machine with absolutely no issues at all.

  Read the article

• How does the Compatibility Mode in Windows work?

  - by ulrichb

  How does the Compatibility Mode in Windows work internally?

  Read the article

• Mac won't boot into safe mode

  - by Stephen

  Mac boots fine normally, except when in safe mode. Holding down shift when booting gets me to the progress bar on the grey screen. Progress bar gets about half way before mac reboots. I modified nvram boot-args to get a better look: sudo nvram boot-args="-x -v" It definitely gets through fsck, skips loading kernel extensions (since it's in safe mode), does something with the network interfaces, then this is the last thing it wips through... Aug 22 11:56:21 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'com.apple.ServiceManagement.daemons.modify' by client '/usr/libexec/UserEventAgent' [10] for authorization created by '/usr/libexec/UserEventAgent' [10] (100012,0) Aug 22 11:56:22 Crockpot fseventsd[37]: event logs in /.fseventsd out of sync with volume. destroying old logs. (1 174 330) Aug 22 11:56:22 Crockpot fseventsd[37]: log dir: /.fseventsd getting new uuid: 5C379650-26FA-428F-B81F-4FE4349D50B3 Aug 22 11:56:23 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) starting OSXVers 12 Aug 22 11:56:23 Crockpot systemkeychain[35]: done file: /var/run/systemkeychaincheck.done Aug 22 11:56:23 Crockpot configd[17]: network changed: DNS* Aug 22 11:56:24 --- last message repeated 1 time --- Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2D_IPC: Loaded Aug 22 11:56:24 Crockpot mDNSResponder[39]: D2DInitialize succeeded Aug 22 11:56:24 Crockpot mDNSResponder[39]: Adding registration domain 273025955.members.btmm.icloud.com. Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe MAC AUTH succeeded Aug 22 11:56:24 Crockpot kernel[0]: MacAuthEvent en1 Auth result for: 00:23:69:35:dc:fe Unsolicited Auth Aug 22 11:56:24 Crockpot kernel[0]: wlEvent: en1 en1 Link UP virtIf = 0 Aug 22 11:56:24 Crockpot kernel[0]: AirPort: Link Up on en1 Aug 22 11:56:24 Crockpot kernel[0]: en1: BSSID changed to 00:23:69:35:dc:fe Aug 22 11:56:24 Crockpot kernel[0]: en1::IO80211Interface::postMessage bssid changed Aug 22 11:56:24 Crockpot kernel[0]: AirPort: RSN handshake complete on en1 Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences failed to read preferences data. Errno was 21 Aug 22 11:56:25 --- last message repeated 1 time --- Aug 22 11:56:25 Crockpot airportd[30]: _doAutoJoin: Already associated to “burnum”. Bailing on auto-join. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Can't load IOBluetoothSerialManager.kext - ineligible during safe boot. Aug 22 11:56:25 Crockpot com.apple.kextd[11]: Load com.apple.iokit.IOBluetoothSerialManager failed; removing personalities from kernel. Aug 22 11:56:25 Crockpot cfprefsd[19]: CFPreferences: error renaming file blued.plist.HXuEmQn to blued.plist. Aug 22 11:56:27 Crockpot awacsd[52]: Starting awacsd connectivity-77 (Jun 20 2012 15:40:49) Aug 22 11:56:27 Crockpot com.apple.SecurityServer[15]: Succeeded authorizing right 'system.services.systemconfiguration.network' by client '/System/Library/Frameworks/SystemConfiguration.framework/Versions/A/Resources/SCHelper' [54] for authorization created by '/usr/sbin/awacsd' [52] (100003,0) Aug 22 11:56:27 --- last message repeated 1 time --- Aug 22 11:56:27 Crockpot awacsd[52]: Configuring lazy AWACS client: 273025955.p04.members.btmm.icloud.com. Aug 22 11:56:28 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:32 --- last message repeated 1 time --- Aug 22 11:56:32 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:38 --- last message repeated 1 time --- Aug 22 11:56:38 Crockpot apsd[55]: CGSLookupServerRootPort: Failed to look up the port for "com.apple.windowserver.active" (1102) Aug 22 11:56:47 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:56:49 Crockpot configd[17]: subnet_route: write routing socket failed, Network is unreachable Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1+:169.254.80.161) DNS* Proxy+ SMB Aug 22 11:56:51 Crockpot UserEventAgent[10]: Captive: en1: Not probing 'burnum' (protected network) Aug 22 11:56:51 Crockpot configd[17]: network changed: v4(en1:169.254.80.161) DNS Proxy SMB Aug 22 11:57:07 Crockpot awacsd[52]: KV HTTP 0 Aug 22 11:57:23 Crockpot fseventsd[37]: Logging disabled completely for device:1: /Volumes/Recovery HD Aug 22 11:57:25 Crockpot kernel[0]: Kext loading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kext unloading now disabled. Aug 22 11:57:25 Crockpot mDNSResponder[39]: mDNSResponder mDNSResponder-379.27 (Jun 20 2012 15:40:55) stopping Aug 22 11:57:25 Crockpot com.apple.SecurityServer[15]: Killing auth hosts Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot configd[17]: dnssd_clientstub read_all(26) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: [0x7fb025119ff0] SCNetworkReachability _llq_callback w/error=-65563 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2D_IPC: Terminated Aug 22 11:57:25 Crockpot mDNSResponder[39]: D2DTerminate succeeded Aug 22 11:57:25 Crockpot awacsd[52]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 2 times --- Aug 22 11:57:25 Crockpot apsd[55]: dnssd_clientstub read_all(4) failed 0/28 0 Aug 22 11:57:25 Crockpot configd[17]: SCNC: stop, triggered by configd, type PPPSerial, reason Terminated All Aug 22 11:57:25 Crockpot configd[17]: _d2dCallback: D2D connection to mDNSResponder lost Aug 22 11:57:25 Crockpot UserEventAgent[10]: dnssd_clientstub DNSServiceProcessResult called with DNSServiceRef with no ProcessReply function Aug 22 11:57:25 --- last message repeated 4 times --- Aug 22 11:57:25 Crockpot kernel[0]: Kext autounloading now disabled. Aug 22 11:57:25 Crockpot kernel[0]: Kernel requests now disabled. ... before rebooting in the middle of the safe mode startup sequence. Aug 22 12:01:10 localhost bootlog[0]: BOOT_TIME 1345662070 0 Aug 22 12:01:32 localhost kernel[0]: PMAP: PCID enabled Aug 22 12:01:32 localhost kernel[0]: Darwin Kernel Version 12.0.0: Sun Jun 24 23:00:16 PDT 2012; root:xnu-2050.7.9~1/RELEASE_X86_64 Any ideas what's causing the safe mode boot to fail? System Info MacBook Pro 8,2 2.2 Ghz Core i7 4 GM Ram Mountain Lion 10.8 500GB TOSHIBA MK5065GSXF Serial-ATA rotational disk

  Read the article

• External monitor image not centered in the screen

  - by kemp

  I'm using Xorg 7.5 on a Radeon HD4870 with the FOSS radeonhd server on my HP 6830s. The laptop has a VGA connector and I attach it to a 37" panasonic plasma TV. It works fine except for a little annoyance: when activated, the TV screen is set to the resolution of 1360x768 (which it reports as being the highest it supports) but all the image is shifted by about 100 pixels to the right. I can't see the leftmost part of the page, and I have a black vertical bar to the right. If I change the resolution to 1024x768 there is no shifting, the image fills the entire screen with no parts hidden, but at this resolution the image is stretched. How can I tune the position on the external monitor so that the image is centered in the screen filling it entirely?

  Read the article

• Windows 8 screen goes black after a minute

  - by Deni

  My laptop screen goes black after about a minute of inactivity. I've already tried setting the Screen Saver to anything other than Blank and increasing the Wait but it still keeps happening. Also checked my Power Options, the plan I currently have is set to turn the screen off only after an hour. If I move the mouse or press any key on the keyboard the screen wakes up. Any other ideas why this is happening and how to fix it?

  Read the article

• Enlarging everything on 16" 1920x1080 notebook display in Windows 7

  - by Rob

  Does Windows 7 have an option to enlarge everything on the screen, e.g. via a spi setting? How well does this work? i.e. do the objects look clear when enlarged? I ask this because sometimes software that enlarges non-photographic bitmap images e.g. icons and symbols can leave them artifacted with harsh jaggier slopes and blurred lines. I've tried the dpi setting in Windows XP but it doesn't enlarge everything, and some things are not so clear as described above. I'm looking at a notebook/laptop with this spec. I've already enjoyed using a 15.4" 1920x1200 display for 5 years. I've tried the dpi setting in Windows XP but it doesn't enlarge everything, and some things are not so clear as described above. I am buying a laptop for my father who will probably prefer larger objects on the screen, although I want to provide some future proofing by allowing more on the screen if needed. I'm not interested in answers that debate the effectiveness or otherwise merits of 1920x1080 on a 16" display, please. The alternative option of 1366x768 seems too little.

  Read the article

• How to know whether mongodb is running on 64 bit mode or 32 bit mode

  - by Jim Thio

  My programmer install mongodb. Then somehow it doesn't work. I run C:\mongod\bin>mongod mongod --help for help and startup options Sat Aug 11 22:57:50 Sat Aug 11 22:57:50 warning: 32-bit servers don't have journaling enabled by def ault. Please use --journal if you want durability. Sat Aug 11 22:57:50 Sat Aug 11 22:57:50 [initandlisten] MongoDB starting : pid=3800 port=27017 dbpat h=/data/db 32-bit host=haryantoi5 Sat Aug 11 22:57:50 [initandlisten] Sat Aug 11 22:57:50 [initandlisten] ** NOTE: when using MongoDB 32 bit, you are limited to about 2 gigabytes of data Sat Aug 11 22:57:50 [initandlisten] ** see http://blog.mongodb.org/post/13 7788967/32-bit-limitations Sat Aug 11 22:57:50 [initandlisten] ** with --journal, the limit is lower Sat Aug 11 22:57:50 [initandlisten] Sat Aug 11 22:57:50 [initandlisten] db version v2.0.7-rc1, pdfile version 4.5 Sat Aug 11 22:57:50 [initandlisten] git version: 9efe4cce272373b52b96de1309c1fbf 0c984305f Sat Aug 11 22:57:50 [initandlisten] build info: windows sys.getwindowsversion(ma jor=6, minor=0, build=6002, platform=2, service_pack='Service Pack 2') BOOST_LIB _VERSION=1_42 Sat Aug 11 22:57:50 [initandlisten] options: {} ************** Unclean shutdown detected. Please visit http://dochub.mongodb.org/core/repair for recovery instructions. ************* Sat Aug 11 22:57:50 [initandlisten] exception in initAndListen: 12596 old lock f ile, terminating Sat Aug 11 22:57:50 dbexit: Sat Aug 11 22:57:50 [initandlisten] shutdown: going to close listening sockets.. . Sat Aug 11 22:57:50 [initandlisten] shutdown: going to flush diaglog... Sat Aug 11 22:57:50 [initandlisten] shutdown: going to close sockets... Sat Aug 11 22:57:50 [initandlisten] shutdown: waiting for fs preallocator... Sat Aug 11 22:57:50 [initandlisten] shutdown: closing all files... Sat Aug 11 22:57:50 [initandlisten] closeAllFiles() finished Sat Aug 11 22:57:50 dbexit: really exiting now It seems that mongod is running on 32 bit. I have a 64 bit computer and I want to run mongodb in 64 bit enviroment. How do I do so?

  Read the article

• Can XP Mode use Windows 7 Host's VPN

  - by David Gardiner

  If the host Windows 7 machine has a VPN connection, can that be seen/used by an application running in XP Mode?

  Read the article

• Third Monitor (Mini Display Port, Display Port)

  - by muhsing

  I have got a Hd 6950(2x minidisplay port 2x DVI port 1x HDMI port) graphic cards. And I have got a three monitor. I want to active it all. I learned to need an active minidisplay port to vga or minidisplay port to dvi cable. Here's my problem. I want to buy minidisplay port to dvi but my country doesn't have it but I can find display port to active dvi cable. I have a minidisplay port to display port cable. If I buy Sapphire ACTIVE DP TO SL-DVI CABLE will my third monitor work? I mean I will plug mini display port to display port cable first and after I will plug active dp to dvi cable. Will it work? If someone help me I will be very grateful. I have this And I will buy this After this processing Will my third monitor work with eyefinity? Sorry for my English. I hope you will understand me. Take care.

  Read the article

• Win7 XP mode install fails with cryptic error

  - by MAW74656

  Trying to install XPmode on Win7 Professional 64-bit SP1, but getting an error. I downloaded XPMode, Virtual PC and the update as specified here: http://www.microsoft.com/windows/virtual-pc/download.aspx. When I open XP mode for the first time it goes into the setup ("Setting up Windows XP Mode for first use..."; pick your VM password, etc.), then it runs through the progress bar until almost the end (99%?). At that point I get the error: Could not complete Setup. Please try again. Whats going on here? I've uninstalled Virtual PC and xpmode, and reinstalled in several different orders, no luck. Is there some log file that will tell me whats happening? Theres nothing showing up in the Event log that I can find. How can I fix this?

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >