Search Results

Search found 8627 results on 346 pages for 'extreme feedback devices'.

Page 9/346 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

  • Format External HD on Airport Extreme Base Station?

    - by David.Chu.ca
    I just got an Airport Extreme Base Station. I am planning to use this one replace my current Linksys router. This works fine. My another purpose of getting this device is to use its USB port to connect to several external HDs as my backup Time Machine. I can see one 500GB HD through Airport Base Station. However, I cannot format it by using Disk Utility. What I did is to connect the HD to my iMac directly first and then clean and format the disk by Disk Utility application. Then I move the HD to the Airport Base Station. After that I can designate the HD as my Time Machine destination. Is there any way to format the HD connected to Airport Base Station? Any issues to use an external HD through Airport Base Station for Time Machine backups?

    Read the article

  • Apple Airport Extreme Wireless Card M8881 Connectivity Issue

    - by Carlosfocker
    I bought a Apple Airport Extreme Wireless Card M8881 with the antenna for my old Power Mac G5 1.6 Ghz. The computer is running OS X 10.4. The card works and I can connect to my dlink 802.11g wireless router using WPA2/AES encryption. The problem is that the connection has intermittent connectivity issues. When the issue occurs the signal bars for the connection drop to one or two bars and the performance of the connection suffers greatly. The computer isn't far from the wireless router. I have a laptop at the desk where the mac is and it does not have any issues. I'm not sure what it might be? Updated drivers? Firmware? Let me know if I forgot any important information.

    Read the article

  • Letter to Ballmer: Making Better Consumer Devices

    - by andrewbrust
    Last year, I wrote Steve Ballmer an email, and he was kind enough to write me back.  The email contained a scan of a column I wrote praising Microsoft’s BI strategy.  His reply contained three simple words: “Super nice  thanks.” Well, now I’d like to write to Steve again, in an open letter format, and this time the love may be a bit tougher.  But I’m still super earnest. The past two days have been eventful ones for Microsoft: The company announced the departure of company veterans Robbie Bach and J Allard and the market announced Apple is now besting Microsoft in market capitalization. Plus, announcements were made that make it plain that Ballmer will, in effect, be running Microsoft’s Entertainment & Devices division himself. With that in mind, I’d like to offer my list of a dozen things I think Microsoft’s CEO should do to improve that division’s offerings and, hopefully, its bottom line. So here goes:   1. On Windows Phone 7, Stay the Course The press is teeming with headlines and reader comments proclaiming the death-before-arrival of Windows Phone 7.  That’s plain silly.  You’ve got the makings of a great and unique SmartPhone platform, and you’re the only company (even considering RIM) that can offer full fidelity Exchange integration, not to mention implementing Office on the device.  Let the existing team finish this puppy and ship it. And then have them pump out a few updates, over-the-air, quickly.  Show them that Google Android’s not the only product that can do good, rapid dot releases. And another thing: make sure your OEMs’ devices have flawless touch screens.  If they don’t, then you shouldn’t certify them for delivery to customers.  Period. Oh, and kill the Kin, quietly.  It was DOA, and you know it.   2. Move Media Center to the Xbox Platform Media Center is, at its core, a good product.  But delivering a media distribution and DVR platform on a sophisticated PC operating system like Windows 7 just creates too many moving parts.  Xbox already functions as the best Media Center extender device – it should actually be the hub as well. Media Center is mostly based on .NET code – and XNA is a .NET environment for Xbox – find a way to bridge that small gap and make Media Center a joy to work with instead of a frustration.  Beating Apple TV out of this sub-market is the lowest hanging fruit on the tree (goofy pun, but it’s true).   3. Integrate Media Center with Mediaroom, or Kill the Latter You have two media products with almost identical names.  One is for standalone DVRs and the other is for IPTV cable set tops with DVR capabilities.  Can we merge these please?  My previous request of putting Media Center on Xbox would seem to tie into this nicely, since you’ve announced plans to do that with Mediaroom already.   4. Fix the Red Ring of Death People love the Xbox, but they really don’t love sending their consoles back every 18-24 months, when they get a bunch of red lights flashing on power up.  You’ve handled this defect about as gracefully as possible, but it’s been around for a long time now and it doesn’t seem to be fixed yet.  You can do better.  In fact, you must do better, or you insult your customers.   5. Add Blu Ray to Xbox I know, streaming movies are the future; physical media is legacy technology.  So if that’s true, why did you back HD DVD so hard?  You know why: for now, the film studios won’t allow a large selection of new release, HD, surround sound content be distributed on any medium other than Blu Ray or cable pay per view/on-demand.  Don’t you want home theater buffs to see the Xbox as a fantastic device for their rigs?  Don’t you want to put PlayStation 3 out of its misery?  And if you follow my suggestions above (move Media Center to the Xbox and fix the Red Ring problem), you’d have it all sewn up.  Do I think Blu Ray functionality will move a lot of units?  No.  Do I think that it would move more units with desperately needed influential home theater consumers?  You bet.  And you might sell more ZunePass subscriptions in the process. But while you’re at it, make the fan quieter, please.   6. Make More of Windows Home Server Home Server is a fantastic product.  And for reasons unknown to me, it seems like you’re letting it languish.  Development of the add-in ecosystem seems underfunded.  WHS’ unparalleled ease of use and reliability for home PC backup (and emergency restores) goes unsung.  Product cycles are slow.  Support for your OEMs, who are doing great work, especially in the green space with Atom CPUs, seems lacking.  You’ve married a trophy girl and you keep her cloistered at home!  That’s cruel, unusual and, um, incredibly ill-advised.  Make use of this ace card, and while you’re at it, give it real integration with Media Center.  The integration thus far proof-of-concept quality.  You should go way past that – both products will benefit immeasurably.   7. Set Up a Partner Platform for Custom Installers There’s a whole sub-industry of companies that install, integrate and configure home theater, security and connected home products.  They have an industry group. They are influential in the high-end of the consumer electronics industry, and so are their customers.  They love Media Center and they love Windows Home Server.  But I have talked to several of them at the Consumer Electronics Show and they tell me you don’t love them.  They find it very difficult to do business with Microsoft, even though they want nothing more than to sell and evangelize your platform.  This is a travesty.  Please fix it.  Get Allison Watson and the Microsoft Partner Network on board and have her hire someone who knows how to run a channel program for consumer electronics companies.  Problem solved.  Markets expanded.   8. Make Your Own Hardware In other areas, I know you love your partners.  I help run one, so I appreciate that.  But when it came to Xbox and Zune you built them it yourself (albeit on a contract basis, which is fine).  Windows Phone 7 has a chance to work as an OEM play, but it would work better if you produced the devices.  At least consider building a reference device that sells alongside your OEMs’ offerings.  That’s what Google did with the Nexxus One.  And while that phone was not itself a big seller, it catalyzed two wonderful things : (1) a quality bar was set and (2) partners exceeded it.  Before the Nexxus One, the best Android handset out there was the Motorola Droid. The Nexxus One was better, and the HTC Droid Incredible and Evo 4G are now even better than Google’s phone, which is why Verizon and Sprint decided not to carry it.  Imagine if all Windows Phone 6.x devices were on par with the HTC HD2.  I tend to believe you’d have a lot bigger market share than you do now.   9. Continue with Your Retail Initiative From what I hear, it sounds like it’s going well.  And this goes right along with making your own hardware.  When you build it, they will come.  And then it makes the likes of Best Buy and Staples do better.   10. Make an Acquisition (or Two) TiVo and/or Moxi look ripe for the picking.  With their ability to build stuff people love and your ability to run a business, you might just have something.  But do a better job than you did when you bought Danger.  Buy the ideas, not just the customers, eh?   11. Make Beautiful Stuff You’ve heard this one before, I know.  But I have some head-shrinking advice on this one.  You know that Apple obsesses over its industrial design.  You know that appeals to consumers.  But it seems you think doing so is Apple’s game exclusively and so you shouldn’t even try.  Bull dinky.  Come to New York and visit the Museum of Modern Art’s Architecture and Design gallery.  You’ll see that lots of companies and product categories have had very high design value well before Apple existed.  You can do this, and the Zune HD was a great start.  Now run with that.  Find those negative voices in your head that are telling you that you can’t and shut them up.  For good.   12. Burst the Bubble Some of the products you’ve built seem like they were conceived in a bizarro world.  That would appear to be the result of groupthink.  You must do better.  And there’s lots of people willing to advise you.  This includes just about everyone in the Regional Director program, and probably a bunch of MVPs.  Heck, I bet the guys at Engadget could help out too.  Imagine if you let them see the Kin before it shipped.  Talk to high-end gear consumers.  Talk to Best Buy and CostCo customers too.   Signing Off I hope this was of value to you.  As I wrote this I kept telling myself how obvious, even trite, some of these pieces of advice were and then, because of that, doubting they’d really help.  But I decided that they must not be obvious to Microsoft.  Sometimes when you get wrapped up in stuff, it’s hard to clear your head.  I think my head’s pretty clear here though (I’m wrapped up in other stuff), so maybe my perspective can help.  If not, well, then, I guess they all can’t be super nice.

    Read the article

  • How to Find Out Which Devices Are Supported By Solaris 11

    - by rickramsey
    Image of monks gathering on the steps of the main hall in the Tashilhunpo Monastery is courtesy of Alison Whitear Travel Photography. In his update of Brian Leonard's original Taking Your First Steps With Oracle Solaris, Glynn Foster walks you through the most basic steps required to get a version of Oracle Solaris 11 operational: Installing Solaris (VirtualBox, bare metal, or multi-boot) Managing users (root role, sudo command) Managing services with SMF (svcs and svcadm) Connecting to the network (with SMF or manually via dladm and ipadm) Figuring out the directory structure Updating software (with the IPS GUI or the pkg command) Managing package repositories Creating and managing additional boot environments One of the things you'll have to consider as you install Solaris 11 on an x86 system is whether Solaris has the proper drivers for the devices on your system. In the section titled "Installing On Bare Metal as a Standalone System," Glynn shows you how to use the Device Driver utility that's included with the Graphical Installer. However, if you want to get that information before you start installing Solaris 11 on your x86 system, you can consult the x86 Device List that's part of the Oracle Solaris Hardware Compatibility List (HCL). Here's how: Open the Device List. Scroll down to the table. Open the "Select Release" pull-down menu and pick "Solaris 11 11/11." Move over to the "Select Device Type" pull-down menu, and pick the device type. Or "All." The table will list all the devices of that type that are supported by Solaris 11, including PCI ID and vendor. In the coming days the Solaris Hardware Compatibility List will be updated with more Solaris 11 content. Stay tuned. - Rick Ramsey Website Newsletter Facebook Twitter

    Read the article

  • Why does a proportional controller have a steady state error?

    - by Qantas 94 Heavy
    I've read about feedback loops, how much this steady state error is for a given gain and what to do to remove this steady state error (add integral and/or derivative gains to the controller), but I don't understand at all why this steady state error occurs in the first place. If I understand how a proportional control works correctly, the output is equal to the current output plus the error, multiplied by the proportional gain (Kp). However, wouldn't the error slowly diminish over time as it is added (reaching 0 at infinite time), not have a steady state error? From my confusion, it seems I'm completely misunderstanding how it works - a proper explanation of how this steady state error eventuates would be fantastic.

    Read the article

  • Threading models when talking to hardware devices

    - by Fuzz
    When writing an interface to hardware over a communication bus, communications timing can sometimes be critical to the operation of a device. As such, it is common for developers to spin up new threads to handle communications. It can also be a terrible idea to have a whole bunch of threads in your system, an in the case that you have multiple hardware devices you may have many many threads that are out of control of the main application. Certainly it can be common to have two threads per device, one for reading and one for writing. I am trying to determine the pros and cons of the two different models I can think of, and would love the help of the Programmers community. Each device instance gets handles it's own threads (or shares a thread for a communication device). A thread may exist for writing, and one for reading. Requested writes to a device from the API are buffered and worked on by the writer thread. The read thread exists in the case of blocking communications, and uses call backs to pass read data to the application. Timing of communications can be handled by the communications thread. Devices aren't given their own threads. Instead read and write requests are queued/buffered. The application then calls a "DoWork" function on the interface and allows all read and writes to take place and fire their callbacks. Timing is handled by the application, and the driver can request to be called at a given specific frequency. Pros for Item 1 include finer grain control of timing at the communication level at the expense of having control of whats going on at the higher level application level (which for a real time system, can be terrible). Pros for Item 2 include better control over the timing of the entire system for the application, at the expense of allowing each driver to handle it's own business. If anyone has experience with these scenarios, I'd love to hear some ideas on the approaches used.

    Read the article

  • Data Synchronization in mobile apps - multiple devices, multiple users

    - by ProgrammerNewbie
    I'm looking into building my first mobile app. One of the core features of the application is that multiple devices/users will have access to the same data -- and all of them will have CRUD rights. I believe the architecture should involve a central server where all the data is stored. The devices will use an API to interact with the server to perform its data operations (e.g. adding a record, editing a record, deleting a record). I imagine a scenario where synchronizing the data will become a problem. Assume the application should work when it is not connected to the Internet, and thus cannot communicate with this central server. So: User A is offline and edits record #100 User B is offline and edits record #100 User C is offline and deletes record #100 User C goes online (presumably, record #100 should get deleted on the server) User A and B goes online, but the records they edited no longer exist All sorts of scenarios similar to the above can come up. How is this generally handled? I plan to use MySQL, but am wondering if it's not appropriate for such a problem.

    Read the article

  • extreme slowness with a remote database in Drupal

    - by ceejayoz
    We're attempting to scale our Drupal installations up and have decided on some dedicated MySQL boxes. Unfortunately, we're running into extreme slowness when we attempt to use the remote DB - page load times go from ~200 milliseconds to 5-10 seconds. Latency between the servers is minimal - a tenth or two of a millisecond. PING 10.37.66.175 (10.37.66.175) 56(84) bytes of data. 64 bytes from 10.37.66.175: icmp_seq=1 ttl=64 time=0.145 ms 64 bytes from 10.37.66.175: icmp_seq=2 ttl=64 time=0.157 ms 64 bytes from 10.37.66.175: icmp_seq=3 ttl=64 time=0.157 ms 64 bytes from 10.37.66.175: icmp_seq=4 ttl=64 time=0.144 ms 64 bytes from 10.37.66.175: icmp_seq=5 ttl=64 time=0.121 ms 64 bytes from 10.37.66.175: icmp_seq=6 ttl=64 time=0.122 ms 64 bytes from 10.37.66.175: icmp_seq=7 ttl=64 time=0.163 ms 64 bytes from 10.37.66.175: icmp_seq=8 ttl=64 time=0.115 ms 64 bytes from 10.37.66.175: icmp_seq=9 ttl=64 time=0.484 ms 64 bytes from 10.37.66.175: icmp_seq=10 ttl=64 time=0.156 ms --- 10.37.66.175 ping statistics --- 10 packets transmitted, 10 received, 0% packet loss, time 8998ms rtt min/avg/max/mdev = 0.115/0.176/0.484/0.104 ms Drupal's devel.module timers show the database queries aren't running any slower on the remote DB - about 150 microseconds whether it's the local or the remote server. Profiling with XHProf shows PHP execution times that aren't out of whack, either. Number of queries doesn't seem to make a difference - we seem the same 5-10 second delay whether a page has 12 queries or 250. Any suggestions about where I should start troubleshooting here? I'm quite confused.

    Read the article

  • What parts should I get for an ASRock x58 Extreme motherboard

    - by Brad Gilbert
    I just received an ASRock x58 Extreme motherboard, for my post on this question. It was a 2009 Tom's Hardware recommended buy. It is a Core i7 motherboard, with an X58 Express Chipset. It uses DDR3 RAM. What I want to know is, what parts should I get to finish it off. I'm looking for some good bargains, because of a lack of funds. The most taxing game I will probably play on it is OpenTTD. The only parts I currently have that are compatible: A Dynex 400W power supply. It appears to be an ATX 2.1 power supply, with the addition of a -5 rail. Apparently designed to be compatible with most ATX-style motherboards. Several PCI add-in cards. Mostly 10/100 Network cards Some sound cards Some video cards with a VGA connector Plenty of PATA drives. 8 GB - 80 GB Hard-drives A dozen or-so CD-ROM drives, only a handful of them are CD-RW drives. One DVD-ROM drive I have one LCD, with a 15 pin VGA connector, which I salvaged from the dump. The only thing wrong with it was some dead capacitors. It also has a stuck pixel.

    Read the article

  • Thoughts on my new template language?

    - by Ralph
    Let's start with an example: using "html5" using "extratags" html { head { title "Ordering Notice" jsinclude "jquery.js" } body { h1 "Ordering Notice" p "Dear @name," p "Thanks for placing your order with @company. It's scheduled to ship on {@ship_date|dateformat}." p "Here are the items you've ordered:" table { tr { th "name" th "price" } for(@item in @item_list) { tr { td @item.name td @item.price } } } if(@ordered_warranty) p "Your warranty information will be included in the packaging." p(class="footer") { "Sincerely," br @company } } } The "using" keyword indicates which tags to use. "html5" might include all the html5 standard tags, but your tags names wouldn't have to be based on their HTML counter-parts at all if you didn't want to. The "extratags" library for example might add an extra tag, called "jsinclude" which gets replaced with something like <script type="text/javascript" src="@content"></script> Tags can be optionally be followed by an opening brace. They will automatically be closed as the closing brace. If no brace is used, they will be closed after taking on element. Variables are prefixed with the @ symbol. They may be used inside double-quoted strings. I think I'll use single-quotes to indicate "no variable substitution" like PHP does. Filter functions can be applied to variables like @variable|filter. Arguments can be passed to the filter @variable|filter:@arg1,arg2="y" Attributes can be passed to tags by including them in (), like p(class="classname"). Some questions: Which symbol should I use to prefix variables? @ (like Razor), $ (like PHP), or something else? Should the @ symbol be necessary in "for" and "if" statements? It's kind of implied that those are variables. Tags and controls (like if,for) presently have the exact same syntax. Should I do something to differentiate the two? If so, what? Do you like the attribute syntax? (round brackets) I'll add more questions in a few minutes, once I get some feedback.

    Read the article

  • No output devices in sound settings - therefore, no sound

    - by Kev Quirk
    I've just performed a fresh install of Ubuntu 13.10, and I've noticed that sound isn't working. When I go to sound settings, I can see that there is absolutely no sound devices detected. However, I do have my speakers installed and turned on, plus my machine has an internal speaker as well. I've seen other posts where people mention that they have "Dummy device" listed, this isn't the problem here, the output device section is completely blank. Any help is appreciated. Thanks, Kev

    Read the article

  • How To Safely Eject Your USB Devices From the Desktop Context Menu

    - by Taylor Gibb
    If you are one of those people who don’t safely remove their USB Devices just because you’re lazy, here’s a neat trick to do it from the context menu on your desktop. Even if you are not lazy and just forget, the icon will serve as a mental reminder. So let’s take a look. How to Run Android Apps on Your Desktop the Easy Way HTG Explains: Do You Really Need to Defrag Your PC? Use Amazon’s Barcode Scanner to Easily Buy Anything from Your Phone

    Read the article

  • Setting up Ubuntu Server as a Router with DHCPD and 3 Ethernet devices

    - by cengbrecht
    My configuration: Ubuntu 12.04 DHCP3-server eth0, eth1, eth2 Edit: removed br0&br1 eth0 is the external connection eth1 & eth2 are the internal network eth1 and eth2 are supposed to be seperate networks of student/teachers respectivly. What I would like to have is the internet from external device bridged to device 1 and 2, with the DHCP server controlling the two internal devices. Its already working with DHCP, the part I am stuck on is bridging for internet. I have setup a script that I found here: Router With the original script he linked here: Ubuntu Router Guide echo -e "\n\nLoading simple rc.firewall-iptables version $FWVER..\n" IPTABLES=/sbin/iptables #IPTABLES=/usr/local/sbin/iptables DEPMOD=/sbin/depmod MODPROBE=/sbin/modprobe EXTIF="eth0" INTIF="eth1" INTIF2="eth2" echo " External Interface: $EXTIF" echo " Internal Interface: $INTIF" echo " Internal Interface: $INTIF2" EXTIP=`ifconfig $EXTIF | grep 'inet addr:' | sed 's#.*inet addr\:\([0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\.[0-9]\{1,3\}\).*#\1#g'` echo " External IP: $EXTIP" #====================================================================== #== No editing beyond this line is required for initial MASQ testing == The rest of the script below this is as is. I can get ip from the eth1 & eth2 devices, and my computer can see them, and them it, however, internet is not being passed through. If you need more information please just let me know. EDIT: So I had a 255.255.254.0 network, I believe that was causing the issue. Not sure if it will matter on the second card, I will test later. After changing the subnet to 255.255.255.0 the pings will pass through, however, I cannot get DNS requests to pass? My new Config for Firewall Rules # /etc/iptables.up.rules # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *mangle :PREROUTING ACCEPT [39:4283] :INPUT ACCEPT [39:4283] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [12:4884] :POSTROUTING ACCEPT [13:5145] COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *filter :FORWARD ACCEPT [0:0] :INPUT ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -A FORWARD -j LOG -A FORWARD -m state -i eth1 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth2 -o eth0 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth1 --state NEW,ESTABLISHED,RELATED -j ACCEPT -A FORWARD -m state -i eth0 -o eth2 --state NEW,ESTABLISHED,RELATED -j ACCEPT COMMIT # Completed on Wed Nov 28 19:43:28 2012 # Generated by iptables-save v1.4.12 on Wed Nov 28 19:43:28 2012 *nat :INPUT ACCEPT [0:0] :PREROUTING ACCEPT [0:0] :OUTPUT ACCEPT [0:0] :POSTROUTING ACCEPT [0:0] -A POSTROUTING -o eth0 -j MASQUERADE -A POSTROUTING -o eth0 -j SNAT --to-source 192.168.1.25 COMMIT # Completed on Wed Nov 28 19:43:28 2012 Not sure what else you may need, but I am using Webmin to control the server(Needed for the operators on site to know how to use it.) If you could explain it as standard CLI commands, or edits to this file directly then we should be ok. :) And thanks again Erik, I do believe your edits did help.

    Read the article

  • Give write access to USB and Serial devices automatically

    - by Saeid87
    I am working with some USB and Serial micro-controllers. Everytime I plug a device I have to do the following command to give it write access, and also my password: sudo chmod 666 /dev/ttyUSB0 Can I set my Ubuntu to automatically give write access to pluged in devices? If not, how can I make a batch file that I can easily give the access to port I want for example if I run the following command it does the job: giveaccess -usb0

    Read the article

  • Icons of external devices not appearing on Desktop in 12.04

    - by harisibrahimkv
    In 10.04 and all, when a pen drive or as for that matter, when any external devices are connected, their icons are shown on the desktop and nautilus pops up automatically too. But in my 12.04 Gnome classic, when I connect an external device, nothing happens. I have to open nautilus manually and then click on the icon in the left panel to access the folder of the device. Is there any way to rectify this and restore the old trait as in 10.04?

    Read the article

  • Share USB devices between 32 bit and 64 bit systems

    - by Sreejith S
    The latest version of USBDeviceShare, the USB over IP software, supports sharing USB devices between 32 bit and 64 bit editions of Windows. A USB device plugged in to a 64 bit PC running 64 bit version of Windows can be shared and remotely accessed from a 32 bit PC and vice versa. Download USBDeviceShare USB over Network software from http://www.sysnucleus.com/usbshare/usbshare_download.html Keywords : USB over Ethernet, USB Server, Remote USB Access, Share USB

    Read the article

  • Bluetooth not finding any devices on 12.10

    - by DeanGrobler
    When I switch on my bluetooth and search for devices my laptop doesn't find any even though there's plenty in the area. Most likely this is because of drivers that are missing. So what I want to know is if there's a way I can view the exact details of what bluetooth device I have built into my laptop so I can start searching for a linux version of the needed driver. Any tips? PS - Running 64bit 12.10

    Read the article

  • How can find out the device Id of my unmounted DVD?

    - by fred.bear
    When I put a DVD into the DVD drive, it appears in Nautilus Places, but is not automatically mounted. (this is by personal choice). In this unmounted state, mount (of course) reports nothing, and likewise for df.. but Nautilus is aware of the DVD hardware unit and has read the Label; which it shows in Places So it seems to me that Nautilus has already accessed the DVD devices (Did it temporarily mount it?)... The main point of my question was to determine how to find the device Id of an unmounted device .. but as I've been writing this, I now think it may not be as simple as that... This issue came up because I wanted to test this command cat iso-pieces.* | growisofs -Z /dev/dvd=/dev/stdin, but then realized that I didn't know how to get my DVD's device Id. ... and does the above command requires a mounted device, or does it write directly to the device? ... as you can see, I'm a bit vague about devices :) Come to think of it maybe Nautalus read the DVD device directly, because when all is said and done, something has to read/write directly to it. info growisofs says: Under Linux it will most likely be an ide-scsi device such as "/dev/scd0 How can I find this Id via a script?

    Read the article

  • Thoughts on my new template language/HTML generator?

    - by Ralph
    I guess I should have pre-faced this with: Yes, I know there is no need for a new templating language, but I want to make a new one anyway, because I'm a fool. That aside, how can I improve my language: Let's start with an example: using "html5" using "extratags" html { head { title "Ordering Notice" jsinclude "jquery.js" } body { h1 "Ordering Notice" p "Dear @name," p "Thanks for placing your order with @company. It's scheduled to ship on {@ship_date|dateformat}." p "Here are the items you've ordered:" table { tr { th "name" th "price" } for(@item in @item_list) { tr { td @item.name td @item.price } } } if(@ordered_warranty) p "Your warranty information will be included in the packaging." p(class="footer") { "Sincerely," br @company } } } The "using" keyword indicates which tags to use. "html5" might include all the html5 standard tags, but your tags names wouldn't have to be based on their HTML counter-parts at all if you didn't want to. The "extratags" library for example might add an extra tag, called "jsinclude" which gets replaced with something like <script type="text/javascript" src="@content"></script> Tags can be optionally be followed by an opening brace. They will automatically be closed at the closing brace. If no brace is used, they will be closed after taking one element. Variables are prefixed with the @ symbol. They may be used inside double-quoted strings. I think I'll use single-quotes to indicate "no variable substitution" like PHP does. Filter functions can be applied to variables like @variable|filter. Arguments can be passed to the filter @variable|filter:@arg1,arg2="y" Attributes can be passed to tags by including them in (), like p(class="classname"). You will also be able to include partial templates like: for(@item in @item_list) include("item_partial", item=@item) Something like that I'm thinking. The first argument will be the name of the template file, and subsequent ones will be named arguments where @item gets the variable name "item" inside that template. I also want to have a collection version like RoR has, so you don't even have to write the loop. Thoughts on this and exact syntax would be helpful :) Some questions: Which symbol should I use to prefix variables? @ (like Razor), $ (like PHP), or something else? Should the @ symbol be necessary in "for" and "if" statements? It's kind of implied that those are variables. Tags and controls (like if,for) presently have the exact same syntax. Should I do something to differentiate the two? If so, what? This would make it more clear that the "tag" isn't behaving like just a normal tag that will get replaced with content, but controls the flow. Also, it would allow name-reuse. Do you like the attribute syntax? (round brackets) How should I do template inheritance/layouts? In Django, the first line of the file has to include the layout file, and then you delimit blocks of code which get stuffed into that layout. In CakePHP, it's kind of backwards, you specify the layout in the controller.view function, the layout gets a special $content_for_layout variable, and then the entire template gets stuffed into that, and you don't need to delimit any blocks of code. I guess Django's is a little more powerful because you can have multiple code blocks, but it makes your templates more verbose... trying to decide what approach to take Filtered variables inside quotes: "xxx {@var|filter} yyy" "xxx @{var|filter} yyy" "xxx @var|filter yyy" i.e, @ inside, @ outside, or no braces at all. I think no-braces might cause problems, especially when you try adding arguments, like @var|filter:arg="x", then the quotes would get confused. But perhaps a braceless version could work for when there are no quotes...? Still, which option for braces, first or second? I think the first one might be better because then we're consistent... the @ is always nudged up against the variable. I'll add more questions in a few minutes, once I get some feedback.

    Read the article

  • Send raw data to USB parallel port after upgrading to 11.10

    - by zaphod
    I have a laser cutter connected via a generic USB to parallel adapter. The laser cutter speaks HPGL, as it happens, but since this is a laser cutter and not a plotter, I usually want to generate the HPGL myself, since I care about the ordering, speed, and direction of cuts and so on. In previous versions of Ubuntu, I was able to print to the cutter by copying an HPGL file directly to the corresponding USB "lp" device. For example: cp foo.plt /dev/usblp1 Well, I just upgraded to Ubuntu 11.10 oneiric, and I can't find any "lp" devices in /dev anymore. D'oh! What's the preferred way to send raw data to a parallel port in Ubuntu? I've tried System Settings Printing + Add, hoping that I might be able to associate my device with some kind of "raw printer" driver and print to it with a command like lp -d LaserCutter foo.plt But my USB to parallel adapter doesn't seem to show up in the list. What I do see are my HP Color LaserJet, two USB-to-serial adapters, "Enter URI", and "Network Printer". Meanwhile, over in /dev, I do see /dev/ttyUSB0 and /dev/ttyUSB1 devices for the 2 USB-to-serial adapters. I don't see anything obvious corresponding to the HP printer (which was /dev/usblp0 prior to the upgrade), except for generic USB stuff. For example, sudo find /dev | grep lp produces no output. I do seem to be able to print to the HP printer just fine, though. The printer setup GUI gives it a device URI starting with "hp:" which isn't much help for the parallel adapter. The CUPS administrator's guide makes it sound like I might need to feed it a device URI of the form parallel:/dev/SOMETHING, but of course if I had a /dev/SOMETHING I'd probably just go on writing to it directly. Here's what dmesg says after I disconnect and reconnect the device from the USB port: [ 924.722906] usb 1-1.1.4: USB disconnect, device number 7 [ 959.993002] usb 1-1.1.4: new full speed USB device number 8 using ehci_hcd And here's how it shows up in lsusb -v: Bus 001 Device 008: ID 1a86:7584 QinHeng Electronics CH340S Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 1.10 bDeviceClass 0 (Defined at Interface level) bDeviceSubClass 0 bDeviceProtocol 0 bMaxPacketSize0 8 idVendor 0x1a86 QinHeng Electronics idProduct 0x7584 CH340S bcdDevice 2.52 iManufacturer 0 iProduct 2 USB2.0-Print iSerial 0 bNumConfigurations 1 Configuration Descriptor: bLength 9 bDescriptorType 2 wTotalLength 32 bNumInterfaces 1 bConfigurationValue 1 iConfiguration 0 bmAttributes 0x80 (Bus Powered) MaxPower 96mA Interface Descriptor: bLength 9 bDescriptorType 4 bInterfaceNumber 0 bAlternateSetting 0 bNumEndpoints 2 bInterfaceClass 7 Printer bInterfaceSubClass 1 Printer bInterfaceProtocol 2 Bidirectional iInterface 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x82 EP 2 IN bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Endpoint Descriptor: bLength 7 bDescriptorType 5 bEndpointAddress 0x02 EP 2 OUT bmAttributes 2 Transfer Type Bulk Synch Type None Usage Type Data wMaxPacketSize 0x0020 1x 32 bytes bInterval 0 Device Status: 0x0000 (Bus Powered)

    Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >