Search Results

Search found 887 results on 36 pages for 'grey peak'.

Page 9/36 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >

• how to start LXDE session automatically after tightvncserver starts to make me able see desktop when connecting to the host via vncclient?

  - by Oleksandr Dudchenko

  I have system which is equipped with Intel Celeron processor 1.1 GHz s370 with 384 Mb of RAM on Intel d815egew motherboard which supports wake-on-lan function. I want to use such a PC for Internet sharing to the local network. Also this PC is a DHCP+DNS server as well as router/gateway. Based on above I decided to install Lubuntu as it is lightweight system. I installed Lubuntu 10.04.4 LTS from alternate ISO. System has no auto login. System boots and has acceptable performance. Host PC has onboard 4 network adapters: eth0 – ethernet controller which is used for Local Network connections. Has static address 10.0.0.1 eth1 – ethernet controller which is not used and not configured so far, I plan to connect printer here later on. eth2 - ethernet controller which is used to connect to Internet, which we plan to share for the local network wlan0 – wireless controller, it is used in role of access poit for local Network and has address 10.0.0.2 We want to control our gateway remotely. So, we need to be able to power it on remotely. To allow this I’ve done the following things: $ cd /etc/init.d/ made a new file with command $ sudo vim wakeonlanconfig Wrote the following lines to the newly created file, saved and closed it #!/bin/bash ethtool -s eth0 wol g ethtool -s eth2 wol g exit Made the abovementioned file executable $ sudo chmod a+x wakeonlanconfig Then included it into autostart sequence during boot. $ sudo update-rc.d -f wakeonlanconfig defaults after system reboot we will be able to poweron system remotely. Than we need to have a possibility to connect remotely to the host via SSH and VNC. So, I installed following packets with the following commands: $ sudo apt-get update $ sudo apt-get install openssh-server tightvncserver Add ssh daemon into autostart sequence during boot. $ sudo update-rc.d -f ssh defaults Power off the host PC $ sudo halt Then I went to remote place, send magic paket and powered the Host up. System started... And I connected to the host via Putty from remote system under Windows. Than logged in and run the command to start vnc server. $ tightvncserver -geometry 800x600 -depth 16 :2 VNC server successfully started and I got message like follows. New 'X' desktop is gateway:2 Starting applications specified in /home/dolv/.vnc/xstartup Log file is /home/dolv/.vnc/gateway:2.log Using UltraVNC Viewer programm under windows I connected to the host's vnc server, enterd the password and.... sow only mouse cursor in form of cross on a grey background of 800x600 dots, no desktop. Here is my .vnc/xstartup file #!/bin/sh xrdb $HOME/.Xresources xsetroot -solid grey #x-terminal-emulator -geometry 80x24+10+10 -ls -title "$VNCDESKTOP Desktop" & #x-window-manager & # Fix to make GNOME work export XKL_XMODMAP_DISABLE=1 /etc/X11/Xsession The Question: What I have to change and where to make LXDE session start automatically after tightvncserver starts?

  Read the article

• Problem installing UniversalIndentGUI

  - by DNikolov

  I need a GUI beautifier for C code. I've found UniversalIndentGUI on sourceforge. Downloaded a .deb file.Opened it with Ubuntu Software Center to install it but the button is grey and unclickable and there is a line saying Dependency is not satisfiable: libqscintilla2-3. I've installed via the Synaptic Package Manager libqscintilla2-5 but that didn't help. Is there any way to install the UniversalIndentGUI, the libqscintilla2-3 package or to some how work around the problem?

  Read the article

• Desktop installation fails on Dell Precision T1600 with Nvidia Quadro card?

  - by Masao

  I'm trying to install Ubuntu 12.04 Desktop on a Dell Precision T1600, however, I get a blank screen with only a blinking cursor in the top left hand corner (this is after the grey screen with the small Ubuntu logo at the bottom). If I remove the Nvidia Quadro 2000 card and plug a monitor into the built-in VGA port, then the installation works fine. Also, I've tried an Nvidia Quadro 2000D by PNY, but I get the same problem. Has anyone installed Ubuntu 12.04 Desktop on a Dell Precision workstation?

  Read the article

• the limit of pageviews per month in Google Analytics

  - by crmpicco

  I have been looking around to try and find some confirmation and clarity on the limit of pageviews that Google allow per month for a Google Analytics account. I have read that the limit of hits per month is 10,000,000, and the limit of pageviews is 5,000,000. Putting 2 and 2 together I am thinking this is to allow the other 5,000,000 for events and social clicks and the like? Google's documentation states 5m, but the hits/pageviews is a bit of a grey area as i've read suggestions that the limit can be considered as 10m

  Read the article

• Corrupted Ambiance Theme

  - by Alex

  I have a corrupted Ambiance theme... the background of the top menus is grey :( i must have done some fiddling... If i choose another theme, it seems to work fine, but I want Ambiance :D what do you think i could try? I already tried downloading ambiance again, but same issue happens. I tried to download gnome color chooser, but it doesn't do nothing, so i guess maybe i can change something else... but where? Here's a screenshot:

  Read the article

• Randomly generate directed graph on a grid

  - by Talon876

  I am trying to randomly generate a directed graph for the purpose of making a puzzle game similar to the ice sliding puzzles from Pokemon. This is essentially what I want to be able to randomly generate: http://bulbanews.bulbagarden.net/wiki/Crunching_the_numbers:_Graph_theory. I need to be able to limit the size of the graph in an x and y dimension. In the example given in the link, it would be restricted to an 8x4 grid. The problem I am running into is not randomly generating the graph, but randomly generating a graph, which I can properly map out in a 2d space, since I need something (like a rock) on the opposite side of a node, to make it visually make sense when you stop sliding. The problem with this is that sometimes the rock ends up in the path between two other nodes or possibly on another node itself, which causes the entire graph to become broken. After discussing the problem with a few people I know, we came to a couple of conclusions that may lead to a solution. Including the obstacles in the grid as part of the graph when constructing it. Start out with a fully filled grid and just draw a random path and delete out blocks that will make that path work. The problem then becomes figuring out which ones to delete to avoid introducing an additional, shorter path. We were also thinking a dynamic programming algorithm may be beneficial, though none of us are too skilled with creating dynamic programming algorithms from nothing. Any ideas or references about what this problem is officially called (if it's an official graph problem) would be most helpful. Here are some examples of what I have accomplished so far by just randomly placing blocks and generating the navigation graph from the chosen start/finish. The idea (as described in the previous link) is you start at the green S and want to get to the green F. You do this by moving up/down/left/right and you continue moving in the direction chosen until you hit a wall. In these pictures, grey is a wall, white is the floor, and the purple line is the minimum length from start to finish, and the black lines and grey dots represented possible paths. Here are some bad examples of randomly generated graphs: http://i.stack.imgur.com/9uaM6.png Here are some good examples of randomly generated (or hand tweaked) graphs: i.stack.imgur.com/uUGeL.png (can't post another link, sorry) I've also seemed to notice the more challenging ones when actually playing this as a puzzle are ones which have lots of high degree nodes along the minimum path.

  Read the article

• Defining and selecting an area from an image

  - by meth0d_

  I want to create a game, where the world is loaded from an image file, much like Paradox Interactive does it for their games. If I have this image: Then the red, green, blue, cyan, magenta, white, black and grey should be different provinces. I know how to loop through them, and check if it's a new province, the problem is that I don't know how to define the region of the province for selection: I don't know how I can load in data, to make sure you can click anywhere on that province, and make sure it gets selected.

  Read the article

• Can't connect to windows 7 ad-hoc network

  - by Nikolaj

  Good day! I have installed ubuntu 12.04 on my laptop and I need to have network connection on it. Have a desktop PC, where I've created ad-hoc wi-fi network(Windows 7) and can't connect to it. So, problem: I see my network in the list of networks to connect, but I cant connect to it because it's grey color and not active(can't click on it). Could somebody help me to solve that problem? Thanks in advance!

  Read the article

• The Importance of Online Marketing - How Can YOU Promote Your Business Online?

  The topic of Search Engine Optimisation is highly debated through the World Wide Web. For those who like to work on something which has no grey areas then Search Engine Optimisation and online marketing is not going to come naturally to you. Search engines like Google...

  Read the article

• AJAX Web Application Development Explained

  The concept of combining Asynchronous Javascript with XML to fulfill the purpose of development of highly interactive web applications is called AJAX. Credible examples of the popularity of this tech... [Author: Grey Matter India - Web Design and Development - April 07, 2010]

  Read the article

• Picking an SEO Company Does Not Have to Be Difficult

  If you are considering hiring an SEO Company to get some SEO services done for your site, then you cannot be careful enough because hiring the wrong company can cause significant damage to your SEO campaign. A wrong SEO company practicing black or grey hat techniques can get your site banned or penalized by Google.

  Read the article

• my webserver with 16GB ram shows all RAM as used, but is it really, see the 'top'

  - by Alex

  I have some questions about my web server. Its a LAMP web server running centos 5.5 and php5, mysql5. The server gets hundreds (maybe thousand) of concurrent users during peak hours. I'm trying to optimize a little and understand "top". From what I can see: all 16GB of my ram have been used up? does that mean that my server needs more memory? My swap is only 2GB, should it be increased? usually during peak hours my server load average first number is about 2.5-3. What could I do to optimize the server so that the load average even during peak doesn't go above 1? In the past I was told a good working server should stay under 1 load, is this still true? Although even during load of 2.5-3, server pages and applications seem to load with pretty good speed. what should the memory size in php.ini be set to? top - 14:30:18 up 2 days, 12:41, 5 users, load average: 1.25, 1.74, 2.92 Tasks: 305 total, 2 running, 302 sleeping, 0 stopped, 1 zombie Cpu(s): 6.3%us, 0.9%sy, 0.0%ni, 92.5%id, 0.2%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 16427200k total, 16111472k used, 315728k free, 3120316k buffers Swap: 2104496k total, 268k used, 2104228k free, 6216756k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 29080 apache 15 0 358m 36m 5192 S 20.2 0.2 2:08.40 httpd 29093 apache 18 0 357m 36m 5192 S 18.2 0.2 2:02.52 httpd 29079 apache 15 0 370m 49m 5832 S 10.0 0.3 2:32.14 httpd 1812 apache 15 0 370m 49m 5196 S 7.3 0.3 2:25.30 httpd 5204 apache 15 0 358m 36m 5168 S 5.3 0.2 0:59.28 httpd 29075 apache 15 0 370m 48m 5184 S 3.3 0.3 2:15.93 httpd 9712 apache 15 0 360m 38m 5180 S 3.0 0.2 0:54.81 httpd 29072 apache 16 0 358m 36m 5192 S 2.7 0.2 2:24.43 httpd 6310 apache 17 0 388m 67m 5180 S 2.3 0.4 0:58.85 httpd 8674 apache 15 0 343m 21m 4980 S 2.0 0.1 0:07.91 httpd 29085 apache 15 0 371m 49m 5224 S 2.0 0.3 2:16.86 httpd 29083 apache 15 0 370m 48m 5196 S 1.7 0.3 2:10.64 httpd 5575 apache 15 0 357m 36m 5228 S 1.3 0.2 0:53.78 httpd 29066 apache 15 0 379m 59m 5860 R 1.3 0.4 2:11.93 httpd 29078 apache 15 0 370m 48m 5188 S 1.3 0.3 2:14.52 httpd 29084 apache 15 0 370m 48m 5208 S 1.0 0.3 2:02.49 httpd 29089 apache 15 0 370m 48m 5188 S 1.0 0.3 2:27.61 httpd 29082 apache 15 0 390m 68m 5188 S 0.7 0.4 2:32.48 httpd 29984 apache 15 0 358m 36m 5228 S 0.7 0.2 2:08.32 httpd 3571 root 16 0 13400 1792 848 S 0.3 0.0 2:37.89 top 4419 mysql 15 0 668m 175m 7204 S 0.3 1.1 3:32.25 mysqld 28181 root 15 0 90460 3624 2680 S 0.3 0.0 0:17.60 sshd 29091 apache 15 0 390m 69m 5196 S 0.3 0.4 2:29.99 httpd 32476 root 15 0 12900 1320 848 R 0.3 0.0 0:06.46 top 1 root 15 0 10372 680 572 S 0.0 0.0 0:02.01 init 2 root RT -5 0 0 0 S 0.0 0.0 0:00.51 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.07 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 0:00.12 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 0:00.06 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 0:00.06 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 14 root RT -5 0 0 0 S 0.0 0.0 0:01.45 migration/4 15 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/4 16 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/4 17 root RT -5 0 0 0 S 0.0 0.0 0:00.22 migration/5 18 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/5 19 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/5 20 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/6 21 root 34 19 0 0 0 S 0.0 0.0 0:00.02 ksoftirqd/6 22 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/6 23 root RT -5 0 0 0 S 0.0 0.0 0:00.15 migration/7 24 root 34 19 0 0 0 S 0.0 0.0 0:00.01 ksoftirqd/7 25 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/7 26 root RT -5 0 0 0 S 0.0 0.0 0:00.19 migration/8 27 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/8 28 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/8 29 root RT -5 0 0 0 S 0.0 0.0 0:00.34 migration/9 30 root 34 19 0 0 0 S 0.0 0.0 0:00.03 ksoftirqd/9 31 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/9 32 root RT -5 0 0 0 S 0.0 0.0 0:00.16 migration/10 33 root 34 19 0 0 0 S 0.0 0.0 0:00.04 ksoftirqd/10 34 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/10 35 root RT -5 0 0 0 S 0.0 0.0 0:00.12 migration/11 36 root 34 19 0 0 0 S 0.0 0.0 0:00.05 ksoftirqd/11 37 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/11 38 root RT -5 0 0 0 S 0.0 0.0 0:00.35 migration/12

  Read the article

• iMac 20inch (Mid 2007) SL DVD Boot Prohibitory Sign

  - by Caitlann Lloyd

  iMac 20inch (Mid 2007 Build) with Ubuntu 12.0.4 How I got in this situation I had a perfectly healthy Intel iMac running Snow Leopard several months ago. Then I got the dreaded spinning gear and several kernel panics. After getting a little frustrated (failing to find a solution online), I found an old macbook installation disk and used it to access Disk Utility. From here, I erased my entire hard drive leaving me with no OS. I then created a Ubuntu DVD and installed Ubuntu onto the system. Now, on Ubuntu, I wine installed Transmac and burned a Single layer copy (with languages, etc. removed to save space) of Snow Leopard onto a 4.7GB DVD. I tried to boot from it and was met with first the grey apple screen and a spinning cog before the grey apple shortly turned into the infamous prohibitory sign. Note: I met this problem previously when using Disk Utility to create a bootable USB of Snow Leopard, hence I severely doubt it has anything to do with the DVD created. Resources at my disposal 1 x iMac running Ubuntu 6 x 4.7GB DVDs 1 x USB Stick 12GB 1 x Windows 7 Laptop Resources I do not have Firewire cables Access to a prebuilt retail disk (Misplaced) Access to another Mac Apple Warranty I would be hugely grateful if someone was able to tell me how to install Snow Leopard again.

  Read the article

• Is there a way in Windows 7 to disable "journaling"?

  - by Psycogeek

  C:\$extend\$Usn.Jrnl:$J:$data Here is a picture finally. The large strip in the center of the top band is the largest chunk, in the other, grey areas are the various clusters with it. On the right, the big long grey line is $logfile (not paging), and it is 63&nbsb;MB. Paging, 500&nbsb;MB is the dark cyan chunk, next to the yellow MFTres in the inner rings.. The disk was defragged so they could be seen easier. Not all clusters of this type of file are tagged, but the idea is there. The disk is 4k clusters, now about 12 GB size. Each cute little block in the picture is .81 MB and represents 207 clusters. The dkGreen section, is mostly the whole Winsxs pile, also interesting when they keep telling us it doesn't take much disk space. Wikipedia suggests that in previous NT systems "USN journaling" would be turned on when enabled (assumes it could also be turned off?). What aspects, services, or program is working on putting that stuff all over the disk which is known by $jrnl$ type clusters, even if it is not actual USN journaling? Is it possible in a Windows 7 system to completly disable the journaling, and what would be the ramifications of that? On a Windows XP NTFS system, I do not recall seeing the quantity of disk clusters used with these $jrnl$ names, so I do not recall this being necessary in this quantity for an NTFS file system itself? I understand that it would not be there, if it did not have a useful function :-) Information about how wonderful is fine, if that information will help track down what parts of the system create and use it. Change Journals states: Change journals are also needed to recover file system indexing Hmm, that might explain some of them, or why it was left on the disk. A crash while background indexing?

  Read the article

• Screen randomly goes blue/black/white

  - by FubsyGamer

  Problem Randomly, while using my computer, the monitor goes dark grey/almost black, or it goes white with faint grey vertical lines, or it goes blue with black vertical lines. It's as if the computer powers off. People tell me I sign out of Skype, Spotify stops playing when it happens, etc. When I look at the tower, it doesn't seem like it's off at all. Nothing changes, fans are spinning, lights are on, etc. If you were only looking at the tower, you'd never know there was a problem The only way I can get it to come back up is to push and hold the power button and turn it off, then back on This never happens while I'm playing video games. I've done 5-6 hour sessions of League of Legends, and it doesn't do anything When I'm just browsing the web, reading email, checking Reddit, etc, it happens all the time. It can happen multiple times in a session, it usually takes only about 5 minutes from the time I start browsing to when the computer crashes This started happening after I moved to a new apartment (this has to be relevant somehow, it was not happening where I lived before) There is nothing in the crash logs or event logs System Specs i5 2500k CPU AMD Radeon 6800 GPU Gigabyte z68a-d3h-b3 motherboard WD VelociRaptor 1 TB HDD Screenshots Device manager About screen Things I have tried I was getting a WMI Error in my event logs, but I fixed it using Microsoft's fix, KB 2545227 I was using Windows 8. I wiped the HDD and downgraded to Windows 7 64 bit I took out the video card and used a can of air to totally clean out the video card, all fans, and the inside of the computer in general. I made sure all of the video card pins were fine, then reconnected it I tried to update my motherboard BIOS, but anything I downloaded from Gigabyte was only for 32 bit machines, not 64. I don't even know how to tell what my motherboard BIOS is at right now I am using a power strip, and anything else connected to it works just fine If I re-seat the monitor cable while this is happening, nothing changes Please, help me. I've been battling this for several weeks now, and it's so frustrating it makes me not even want to use the computer.

  Read the article

• What can cause two "identical" setups of IE8 and XP to display things differently?

  - by ccornet

  This has been baffling me for a while. Of the machines I use in visitting Stack Overflow, two of them are machines with the same setup: Dell with Windows XP with IE8. Since they were issued to me by the same company (one to use in the office, one to use at home), they have identical setups as well. But they display certain page elements differently! One is an Optiplex GX620 desktop, the other is an Inspiron 9100 laptop, but somehow the hardware doesn't seem like something that should be overriding how my browser displays things. Nevertheless, the laptop seems to display things differently than what is expected. Differences have included the following: This issue persisted on the laptop after Jeff fixed it, but was repaired for everyone else and on the Desktop. When viewing Vote Counts on a post, the grey line is left immediately beneath the upvotes but a number-sized white space is below that before the downvotes. On the desktop, it displays properly with the two adjacent and divided by a grey line. Code blocks seem to have a blank line at the end on the laptop. The following image illustrates how the last two elements look on the laptop. So, considering that as far as I can tell, these two setups are identical (I have not messed with any settings and they were both initialized identically as well), what else could be causing the display difference?

  Read the article

• Oracle TimesTen In-Memory Database Performance on SPARC T4-2

  - by Brian

  The Oracle TimesTen In-Memory Database is optimized to run on Oracle's SPARC T4 processor platforms running Oracle Solaris 11 providing unsurpassed scalability, performance, upgradability, protection of investment and return on investment. The following demonstrate the value of combining Oracle TimesTen In-Memory Database with SPARC T4 servers and Oracle Solaris 11: On a Mobile Call Processing test, the 2-socket SPARC T4-2 server outperforms: Oracle's SPARC Enterprise M4000 server (4 x 2.66 GHz SPARC64 VII+) by 34%. Oracle's SPARC T3-4 (4 x 1.65 GHz SPARC T3) by 2.7x, or 5.4x per processor. Utilizing the TimesTen Performance Throughput Benchmark (TPTBM), the SPARC T4-2 server protects investments with: 2.1x the overall performance of a 4-socket SPARC Enterprise M4000 server in read-only mode and 1.5x the performance in update-only testing. This is 4.2x more performance per processor than the SPARC64 VII+ 2.66 GHz based system. 10x more performance per processor than the SPARC T2+ 1.4 GHz server. 1.6x better performance per processor than the SPARC T3 1.65 GHz based server. In replication testing, the two socket SPARC T4-2 server is over 3x faster than the performance of a four socket SPARC Enterprise T5440 server in both asynchronous replication environment and the highly available 2-Safe replication. This testing emphasizes parallel replication between systems. Performance Landscape Mobile Call Processing Test Performance System Processor Sockets/Cores/Threads Tps SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 218,400 M4000 SPARC64 VII+, 2.66 GHz 4 16 32 162,900 SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 80,400 TimesTen Performance Throughput Benchmark (TPTBM) Read-Only System Processor Sockets/Cores/Threads Tps SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 7.9M SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 6.5M M4000 SPARC64 VII+, 2.66 GHz 4 16 32 3.1M T5440 SPARC T2+, 1.4 GHz 4 32 256 3.1M TimesTen Performance Throughput Benchmark (TPTBM) Update-Only System Processor Sockets/Cores/Threads Tps SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 547,800 M4000 SPARC64 VII+, 2.66 GHz 4 16 32 363,800 SPARC T3-4 SPARC T3, 1.65 GHz 4 64 512 240,500 TimesTen Replication Tests System Processor Sockets/Cores/Threads Asynchronous 2-Safe SPARC T4-2 SPARC T4, 2.85 GHz 2 16 128 38,024 13,701 SPARC T5440 SPARC T2+, 1.4 GHz 4 32 256 11,621 4,615 Configuration Summary Hardware Configurations: SPARC T4-2 server 2 x SPARC T4 processors, 2.85 GHz 256 GB memory 1 x 8 Gbs FC Qlogic HBA 1 x 6 Gbs SAS HBA 4 x 300 GB internal disks Sun Storage F5100 Flash Array (40 x 24 GB flash modules) 1 x Sun Fire X4275 server configured as COMSTAR head SPARC T3-4 server 4 x SPARC T3 processors, 1.6 GHz 512 GB memory 1 x 8 Gbs FC Qlogic HBA 8 x 146 GB internal disks 1 x Sun Fire X4275 server configured as COMSTAR head SPARC Enterprise M4000 server 4 x SPARC64 VII+ processors, 2.66 GHz 128 GB memory 1 x 8 Gbs FC Qlogic HBA 1 x 6 Gbs SAS HBA 2 x 146 GB internal disks Sun Storage F5100 Flash Array (40 x 24 GB flash modules) 1 x Sun Fire X4275 server configured as COMSTAR head Software Configuration: Oracle Solaris 11 11/11 Oracle TimesTen 11.2.2.4 Benchmark Descriptions TimesTen Performance Throughput BenchMark (TPTBM) is shipped with TimesTen and measures the total throughput of the system. The workload can test read-only, update-only, delete and insert operations as required. Mobile Call Processing is a customer-based workload for processing calls made by mobile phone subscribers. The workload has a mixture of read-only, update, and insert-only transactions. The peak throughput performance is measured from multiple concurrent processes executing the transactions until a peak performance is reached via saturation of the available resources. Parallel Replication tests using both asynchronous and 2-Safe replication methods. For asynchronous replication, transactions are processed in batches to maximize the throughput capabilities of the replication server and network. In 2-Safe replication, also known as no data-loss or high availability, transactions are replicated between servers immediately emphasizing low latency. For both environments, performance is measured in the number of parallel replication servers and the maximum transactions-per-second for all concurrent processes. See Also SPARC T4-2 Server oracle.com OTN Oracle TimesTen In-Memory Database oracle.com OTN Oracle Solaris oracle.com OTN Oracle Database 11g Release 2 Enterprise Edition oracle.com OTN Disclosure Statement Copyright 2012, Oracle and/or its affiliates. All rights reserved. Oracle and Java are registered trademarks of Oracle and/or its affiliates. Other names may be trademarks of their respective owners. Results as of 1 October 2012.

  Read the article

• 30 Steps to Master ASP.NET MVC Application development

  - by Rajesh Pillai

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui) } /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";} Welcome Readers!,   I am starting out a new series on ASP.NET  MVC skill building which will be posted over the next couple of weeks.  Let me know your thoughts on the content, which I have planned and a couple of them has been taken from ASP.NET MVC2 Cookbook. (NOTE: Only the heading has been taken, the content will be not :)).   Do let me know what you would like to see, or any additional inputs or ideas to cover in this topics.  The 30 steps are oultined below for quick reference.  Will start filling this out quickly.   Outlined is the ‘30’ step to master ASP.NET MVC.   A Peek Into Model What is a model? Different types of model Presentation/ViewModel Model Mapping (AutoMapper)   A Peak into View How view works in ASP.NET MVC? View Engine Design Custom View Engine View Best Practices Templated Helpers Partial Views   A Peak into Controller Introduction Controller Design Controller Best Practices Asynchronous Controller Custom Action Result Action Filters Controller Factory to use with IOC   Routes Explanation Routes from the database Routes from XML More complex routing   Master Pages Basics Setting Master Page Dynamically   Working with data in the view Repeating Views Array of check boxes Array of radio buttons Paged data CRUD Client side action Confirmation Dialog (modal window) jqGrid   Working with Forms   Validation Model Validation with DataAnnotations Using the xVal validation framework Client side validation with jQuery Validation Fluent Validation Model Binders   Templating Create strongly typed helper using T4 Custom View Templates with T4 Create custom MVC project template using T4   IOC AutoFac Ninject Unity Application   Areas   jQuery, Ajax and jQuery Plugins   State Maintenance Application State User state Cookies Webfarm   Error Handling View error handling Controller error handling ELMAH (Error Logging Modules and Handlers)   Authentication and Authorization User Registration form SignOn Process Password Reminder Membership and Roles Windows authentication Restricting access to all pages Restricting access to selected pages Restricting access to pages by role Restricting access to a controller Restricting access to selected area   Profiles and Themes Using Profiles Inheriting a Profile Migrating an anonymous profile Creating custom themes Using themes User personalized themes   Configuration Adding custom application settings in web.config Displaying custom error messages Accessing other web.config configuration elements Adding custom configuration elements to web.config Encrypting web.config sections   Tracing, Debugging and Logging   Caching Caching a whole page Caching pages based on route details Caching pages based on browser type and version Caching pages based custom strings Caching partial pages Caching application data Object Caching Using Microsoft Velocity Using MemCache Using AppFabric cache   Localization   HTTP Handlers and Modules   Security XSS/CSRF AnitForgery Encoding   HtmlHelpers Strongly typed helpers Writing custom helpers   Repository Pattern (Data access)   WF/WCF   Unit Testing   Mocking Framework   Integration Testing   Load / Performance Testing   Deployment    Once again let me know your thoughts on this.   Till then, Enjoy MVC'ing!!!

  Read the article

• Windows Azure Recipe: Consumer Portal

  - by Clint Edmonson

  Nearly every company on the internet has a web presence. Many are merely using theirs for informational purposes. More sophisticated portals allow customers to register their contact information and provide some level of interaction or customer support. But as our understanding of how consumers use the web increases, the more progressive companies are taking advantage of social web and rich media delivery to connect at a deeper level with the consumers of their goods and services. Drivers Cost reduction Scalability Global distribution Time to market Solution Here’s a sketch of how a Windows Azure Consumer Portal might be built out: Ingredients Web Role – this will host the core of the solution. Each web role is a virtual machine hosting an application written in ASP.NET (or optionally php, or node.js). The number of web roles can be scaled up or down as needed to handle peak and non-peak traffic loads. Database – every modern web application needs to store data. SQL Azure databases look and act exactly like their on-premise siblings but are fault tolerant and have data redundancy built in. Access Control (optional) – if identity needs to be tracked within the solution, the access control service combined with the Windows Identity Foundation framework provides out-of-the-box support for several social media platforms including Windows LiveID, Google, Yahoo!, Facebook. It also has a provider model to allow integration with other platforms as well. Caching (optional) – for sites with high traffic with lots of read-only data and lists, the distributed in-memory caching service can be used to cache and serve up static data at higher scale and speed than direct database requests. It can also be used to manage user session state. Blob Storage (optional) – for sites that serve up unstructured data such as documents, video, audio, device drivers, and more. The data is highly available and stored redundantly across data centers. Each entry in blob storage is provided with it’s own unique URL for direct access by the browser. Content Delivery Network (CDN) (optional) – for sites that service users around the globe, the CDN is an extension to blob storage that, when enabled, will automatically cache frequently accessed blobs and static site content at edge data centers around the world. The data can be delivered statically or streamed in the case of rich media content. Training Labs These links point to online Windows Azure training labs where you can learn more about the individual ingredients described above. (Note: The entire Windows Azure Training Kit can also be downloaded for offline use.) Windows Azure (16 labs) Windows Azure is an internet-scale cloud computing and services platform hosted in Microsoft data centers, which provides an operating system and a set of developer services which can be used individually or together. It gives developers the choice to build web applications; applications running on connected devices, PCs, or servers; or hybrid solutions offering the best of both worlds. New or enhanced applications can be built using existing skills with the Visual Studio development environment and the .NET Framework. With its standards-based and interoperable approach, the services platform supports multiple internet protocols, including HTTP, REST, SOAP, and plain XML SQL Azure (7 labs) Microsoft SQL Azure delivers on the Microsoft Data Platform vision of extending the SQL Server capabilities to the cloud as web-based services, enabling you to store structured, semi-structured, and unstructured data. Windows Azure Services (9 labs) As applications collaborate across organizational boundaries, ensuring secure transactions across disparate security domains is crucial but difficult to implement. Windows Azure Services provides hosted authentication and access control using powerful, secure, standards-based infrastructure. See my Windows Azure Resource Guide for more guidance on how to get started, including links web portals, training kits, samples, and blogs related to Windows Azure.

  Read the article

• hosting a high traffic facebook app (game)

  - by z3cko

  we are currently developing a high traffic facebook application. all the traffic will be within one month, where there are 500.000 to 1.000.000 expected users. after that month, the game is over and we have a winner - so the app will be archived. we are currently planning to develop the application with ruby on rails and searching for hosting options that can deal with the traffic. the problem is not so much the users, but the peak values: we will have around 500.000 requests coming daily within a short timeframe (lets say within 3 minutes in the worst case) we are expecting 500.000 to 1.000.000 users of the application, with peaks at 1:00pm (timezone GMT+1), where most (up to 80% of the users) will send most of the requests. the requests are from 11th of june to 11.july - after that, the app/game is closed/over. we are currently developing an aggressive caching mechanism - currently we are thinking about 2 or 3 small apps/webservices, that will handle the load. the load is distributed as follows: a) main application, cached data (11 screens, 200k each) b) voting: every day until 1:00pm (timezone GMT+1) - every user votes with about 10k data sent, high concurrent peak values! questions: is there any specific application setup that is recommendable? are there any hosting partners that can be recommended? thanks!

  Read the article

• How to sort a Pandas DataFrame according to multiple criteria?

  - by user1715271

  I have the following DataFrame containing song names, their peak chart positions and the number of weeks they spent at position no 1: Song Peak Weeks 76 Paperback Writer 1 16 117 Lady Madonna 1 9 118 Hey Jude 1 27 22 Can't Buy Me Love 1 17 29 A Hard Day's Night 1 14 48 Ticket To Ride 1 14 56 Help! 1 17 109 All You Need Is Love 1 16 173 The Ballad Of John And Yoko 1 13 85 Eleanor Rigby 1 14 87 Yellow Submarine 1 14 20 I Want To Hold Your Hand 1 24 45 I Feel Fine 1 15 60 Day Tripper 1 12 61 We Can Work It Out 1 12 10 She Loves You 1 36 155 Get Back 1 6 8 From Me To You 1 7 115 Hello Goodbye 1 7 2 Please Please Me 2 20 92 Strawberry Fields Forever 2 12 93 Penny Lane 2 13 107 Magical Mystery Tour 2 16 176 Let It Be 2 14 0 Love Me Do 4 26 157 Something 4 9 166 Come Together 4 10 58 Yesterday 8 21 135 Back In The U.S.S.R. 19 3 164 Here Comes The Sun 58 19 96 Sgt. Pepper's Lonely Hearts Club Band 63 12 105 With A Little Help From My Friends 63 7 I'd like to rank these songs in order of popularity, so I'd like to sort them according to the following criteria: songs that reached the highest position come first, but if there is a tie, the songs that remained in the charts for the longest come first. I can't seem to figure out how to do this in Pandas.

  Read the article

• text to image conversion with JSON response

  - by ruhit

  i have made an application to convert text into image and it working out fine,now i am using JSON for conversion,it also working but except only two fields.....why i dont know, my codes are given below...please help me , is there any better way? // img.html excoflare enter your text here: Font Size:          Color:               Font:                 Height:              Width:                                            img.php require_once 'JSON/JSON.php'; header('Content-type: application/json'); header ("Content-type: image/png"); $text =$_REQUEST['text']; $text=json_encode($text); $path="C:\wamp\www\image"; $height=$_REQUEST['height']; $width=$_REQUEST['width']; define("WIDTH", $width); json_encode(WIDTH); define("HEIGHT", $height); json_encode(HEIGHT); $img = imagecreate(WIDTH, HEIGHT); imagesavealpha($img, true); $trans_colour = imagecolorallocatealpha($img, 0, 0, 0, 127); imagefill($img, 0, 0, $trans_colour); $getcolor=$_REQUEST['color']; switch($getcolor) { case 'red': $red = imagecolorallocate($img, 223, 14, 91); $color=json_encode($red); break; case 'white': $white = imagecolorallocate($img, 255, 255, 255); $color=json_encode($white); break; case 'black': $black = imagecolorallocate($img, 0,0,0); $color=json_encode($black); break; case 'grey': $grey = imagecolorallocate($img, 128, 128, 128); $color=json_encode($grey); break; // default: // break; } //$background_color = imagecolorallocate ($img, 25, 25, 25); $font = $_REQUEST['font']; //$font=json_encode($font); $fontsize =$_REQUEST['size']; //$fontsize=json_encode($fontsize); imagettftext($img, $fontsize, 0, 20, 20, $color, $font, $text); //Create image imagepng($img); imagepng($img,"$path/img.png"); //destroy image ImageDestroy($img); //header ('Content-type: image/png'); ? Thanks in advance..

  Read the article

• What's wrong with this jQuery? It isn't working as intended

  - by Doug Smith

  Using cookies, I want it to remember the colour layout of the page. (So, if they set the gallery one color and the body background another color, it will save that on refresh. But it doesn't seem to be working. jQuery: $(document).ready(function() { if (verifier == 1) { $('body').css('background', $.cookie('test_cookie')); } if (verifier == 2) { $('#gallery').css('background', $.cookie('test_cookie')); } if (verifier == 3) { $('body').css('background', $.cookie('test_cookie')); $('#gallery').css('background', $.cookie('test_cookie')); } $('#set_cookie').click(function() { var color = $('#set_cookie').val(); $.cookie('test_cookie', color); }); $('#set_page').click(function() { $('body').css('background', $.cookie('test_cookie')); var verifier = 1; }); $('#set_gallery').click(function() { $('#gallery').css('background', $.cookie('test_cookie')); var verifier = 2; }); $('#set_both').click(function() { $('body').css('background', $.cookie('test_cookie')); $('#gallery').css('background', $.cookie('test_cookie')); var verifier = 3; }); }); HTML: <p>Please select a background color for either the page's background, the gallery's background, or both.</p> <select id="set_cookie"> <option value="#1d375a" selected="selected">Default</option> <option value="black">Black</option> <option value="blue">Blue</option> <option value="brown">Brown</option> <option value="darkblue">Dark Blue</option> <option value="darkgreen">Dark Green</option> <option value="darkred">Dark Red</option> <option value="fuchsia">Fuchsia</option> <option value="green">Green</option> <option value="grey">Grey</option> <option value="#d3d3d3">Light Grey</option> <option value="#32cd32">Lime Green</option> <option value="#f8b040">Macaroni</option> <option value="#ff7300">Orange</option> <option value="pink">Pink</option> <option value="purple">Purple</option> <option value="red">Red</option> <option value="#0fcce0">Turquoise</option> <option value="white">White</option> <option value="yellow">Yellow</option> </select> <input type="button" id="set_page" value="Page's Background" /><input type="button" id="set_gallery" value="Gallery's Background" /><input type="button" id="set_both" value="Both" /> </div> </div> </body> </html> Thanks so much for the help, I appreciate it. jsFiddle: http://jsfiddle.net/hL6Ye/

  Read the article

• Webserver concurrent connections

  - by sri

  Where can I get statistics of concurrent connections that can be handled by Apache and IIS? Which one will serve more requests in peak times? Thank you, Sri

  Read the article

• IP address times out

  - by Werner

  I'm running a dedicated server with a couple of game servers running on 4 different IP addresses. The most network-heavy server times out a few times during peak hours and all other communication (FTP/SSH) through the same IP also briefly times out. Other servers using other IPs are fine and unaffected as well as FTP/SSH using other IPs. The server is running Debian 6. What causes this, and is there anything I can do?

  Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16  | Next Page >