Search Results

Search found 235 results on 10 pages for 'l2'.

Page 9/10 | < Previous Page | 5 6 7 8 9 10  | Next Page >

  • Linux network stack : adding protocols with an LKM and dev_add_pack

    - by agent0range
    Hello, I have recently been trying to familiarize myself with the Linux Networking stack and device drivers (have both similarly named O'Reilly books) with the eventual goal of offloading UDP. I have already implemented UDP on the NIC but now the hard part... Rather than ask for assistance on this larger goal I was hoping someone could clarify for me a particular snippet I found that is part of a LKM which registeres a new protocol (OTP) that acts as a filter between the device driver and network stack. http://www.phrack.org/archives/55/p55_0x0c_Building%20Into%20The%20Linux%20Network%20Layer_by_lifeline%20&%20kossak.txt (Note: this Phrack article contains three different modules, code for the OTP is at the bottom of the page) In the init function of his example he has: otp_proto.type = htons(ETH_P_ALL); otp_proto.func = otp_func; dev_add_pack(&otp_proto); which (if I understand correctly) should register otp_proto as a packet sniffer and put it into the ptype_all data structure. My question is about the dev_add_pack. Is it the case that the protocol being registered as a filter will always be placed at this layer between L2 and the device driver? Or, for instance could I make such a filtering occur between the application and transport layers (analyze socket parameters) using the same process? I apologize if this is confusing - I am having some trouble wrapping my head around the bigger picture when it comes to modules altering kernel stack functionality. Thanks

    Read the article

  • How frequently IP packets are fragmented at the source host?

    - by Methos
    I know that if IP payload MTU then routers usually fragment the IP packet. Finally all the fragmented packets are assembled at the destination using the fields IP-ID, IP fragment offsets and fragmentation flags. Max length of IP payload is 64K. Thus its very plausible for L4 to hand over payload which is 64K. If the L2 protocol is Ethernet, which often is the case, then the MTU will be about 1600 bytes. Hence IP packet will be fragmented at the source host itself. However, a quick search about IP implementation in Linux tells me that in recent kernels, L4 protocols are fragment friendly i.e. they try to save the fragmentation work for IP by handing over buffers of size which is close to MTU. Considering these two facts, I am wondering about how frequently does the IP packet gets fragmented at the source host itself. Does it occur sometimes/rarely/never? Does anyone know if there are exceptions to the rule of fragmentation in linux kernel (i.e. are there situations where L4 protocols are not fragment friendly)? How is this handled in other common OSes like windows? In general how frequently IP packets are fragmented?

    Read the article

  • minimum L sum in a mxn matrix - 2

    - by hilal
    Here is my first question about maximum L sum and here is different and hard version of it. Problem : Given a mxn *positive* integer matrix find the minimum L sum from 0th row to the m'th row . L(4 item) likes chess horse move Example : M = 3x3 0 1 2 1 3 2 4 2 1 Possible L moves are : (0 1 2 2), (0 1 3 2) (0 1 4 2) We should go from 0th row to the 3th row with minimum sum I solved this with dynamic-programming and here is my algorithm : 1. Take a mxn another Minimum L Moves Sum array and copy the first row of main matrix. I call it (MLMS) 2. start from first cell and look the up L moves and calculate it 3. insert it in MLMS if it is less than exists value 4. Do step 2. until m'th row 5. Choose the minimum sum in the m'th row Let me explain on my example step by step: M[ 0 ][ 0 ] sum(L1 = (0, 1, 2, 2)) = 5 ; sum(L2 = (0,1,3,2)) = 6; so MLMS[ 0 ][ 1 ] = 6 sum(L3 = (0, 1, 3, 2)) = 6 ; sum(L4 = (0,1,4,2)) = 7; so MLMS[ 2 ][ 1 ] = 6 M[ 0 ][ 1 ] sum(L5 = (1, 0, 1, 4)) = 6; sum(L6 = (1,3,2,4)) = 10; so MLMS[ 2 ][ 2 ] = 6 ... the last MSLS is : 0 1 2 4 3 6 6 6 6 Which means 6 is the minimum L sum that can be reach from 0 to the m. I think it is O(8*(m-1)*n) = O(m*n). Is there any optimal solution or dynamic-programming algorithms fit this problem? Thanks, sorry for long question

    Read the article

  • get an id of child element and store in a variable using jquery?

    - by Simpson88Keys
    I'm basically trying to do exactly what the subject suggests, but I'm getting "undefined" in my alert, and I'm not entirely sure why. I am fairly new to jquery, so, I probably have the syntax wrong, but not sure where to go from here. I'll post both of my attempts, which both yield "undefined" in the alert... //In my first attempt, I'm trying to get the id of the inner a tag <ul> <li id="l1" class="active"><a href="#c1">Samp 1</a></li> <li id="l2" class=""><a href="#c2">Samp 2</a></li> <li id="l3" class=""><a href="#c3">Samp 3</a></li> </ul> var selected = $(".active).children("a").attr("id"); alert(selected); //In my second attempt, I'm trying to get the id of the currently selected li var selected = $(".active").attr("id"); alert(selected);

    Read the article

  • Sparc Assembly Call currupts data

    - by Sigge
    I am at the moment working with some assembler code for the Sparc processor family, and i am having some truble with a piece of code.. I think the code and output explains more, but in the short.. When i do a call to the function println my varaibels that i have written to the %fp - 8 memory location is destoryed.. here is my assembler code that i am trying to run !PROCEDURE main .section ".text" .global main .align 4 main: save %sp, -96, %sp L1: set 96, %l0 mov %l0, %o0 call initObject ; nop mov %o0, %l0 mov %l0, %o0 call Test$go ; nop mov %o0, %l0 mov %l0, %o0 call println ; nop L0: ret restore !END main !PROCEDURE Test$go .section ".text" .global Test$go .align 4 Test$go: save %sp, -96, %sp L3: mov %i0, %l0 set 0, %l0 set -8, %l1 add %fp,%l1, %l1 st %l0, [%l1] set 1, %l0 mov %l0, %o0 call println ; nop set -8, %l0 add %fp,%l0, %l0 ld [%l0], %l0 mov %l0, %o0 call println ; nop set 1, %l0 mov %l0, %i0 L2: ret restore !END Test$go Here is the assembler code for the println code .global println .type println,#function println: save %sp,-96,%sp ! block 1 .L193: ! File runtime.c: ! 42 } ! 43 ! 45 /** ! 46 Prints an integer to the standard output stream. ! 47 ! 48 @param i The integer to be printed. ! 49 */ ! 50 void println(int i) { ! 51 printf("%d\n", i); sethi %hi(.L195),%o0 or %o0,%lo(.L195),%o0 call printf mov %i0,%o1 jmp %i7+8 restore This is the out put i get when i run this piece of assembler code 1 67584 1 As u can see, the data that is located at %fp - 8 has been destroyed.. please all feedback is apritiated

    Read the article

  • please help me to solve problem

    - by davit-datuashvili
    first of all this is not homework and nobody tag it as homewrok i did not understand this porblem can anybody explain me?this is not english problem it is just misunderstanding what problem say Consider the problem of neatly printing a paragraph on a printer. The input text is a sequence of n words of lengths l1 , l2 , . . . , ln , measured in characters. We want to print this paragraph neatly on a number of lines that hold a maximum of M characters each. Our criterion of “neatness” is as follows. If a given line contains words i through j , where i = j , and we leave exactly one space between words, the number of extra space characters at the end of the line is M - j + i -(k=i,k< j,k++) lk , which must be nonnegative so that the words fit on the line. We wish to minimize the sum, over all lines except the last, of the cubes of the numbers of extra space characters at the ends of lines. Give a dynamic-programming algorithm to print a paragraph of n words neatly on a printer. Analyze the running time and space requirements of your algorithm.

    Read the article

  • Sparc Assembly Call corrupts data

    - by Sigge
    I am at the moment working with some assembler code for the Sparc processor family, and i am having some truble with a piece of code.. I think the code and output explains more, but in the short.. When i do a call to the function println my varaibels that i have written to the %fp - 8 memory location is destoryed.. here is my assembler code that i am trying to run !PROCEDURE main .section ".text" .global main .align 4 main: save %sp, -96, %sp L1: set 96, %l0 mov %l0, %o0 call initObject ; nop mov %o0, %l0 mov %l0, %o0 call Test$go ; nop mov %o0, %l0 mov %l0, %o0 call println ; nop L0: ret restore !END main !PROCEDURE Test$go .section ".text" .global Test$go .align 4 Test$go: save %sp, -96, %sp L3: mov %i0, %l0 set 0, %l0 set -8, %l1 add %fp,%l1, %l1 st %l0, [%l1] set 1, %l0 mov %l0, %o0 call println ; nop set -8, %l0 add %fp,%l0, %l0 ld [%l0], %l0 mov %l0, %o0 call println ; nop set 1, %l0 mov %l0, %i0 L2: ret restore !END Test$go Here is the assembler code for the println code .global println .type println,#function println: save %sp,-96,%sp ! block 1 .L193: ! File runtime.c: ! 42 } ! 43 ! 45 /** ! 46 Prints an integer to the standard output stream. ! 47 ! 48 @param i The integer to be printed. ! 49 */ ! 50 void println(int i) { ! 51 printf("%d\n", i); sethi %hi(.L195),%o0 or %o0,%lo(.L195),%o0 call printf mov %i0,%o1 jmp %i7+8 restore This is the out put i get when i run this piece of assembler code 1 67584 1 As u can see, the data that is located at %fp - 8 has been destroyed.. please all feedback is apritiated

    Read the article

  • Crystal Reports Cross Tab Conditional Formatting

    - by ltran
    I would like to achieve a simplified result similar to the "Color Scale" function in Excel i.e. gradient colouring based on the lowest value (red) to highest value (green), except in my cross tab using Crystal Reports 2008. My cross tab looks a little like this: HOURS L1 L2 L3 L4 Total 1 hours | 5 | 0 | 1 | 16 | 22 | 2 hours | 0 | 1 | 0 | 10 | 11 | 3 hours | 8 | 2 | 6 | 12 | 28 | TOTAL |13 | 3 | 7 | 38 | 61 | The principle of my function is find the maximum value in the cross table then use 20%, 40%, 60%, 80% values to colour the background. Function is as follows (in the format background section): if currentfieldvalue < ((Maximum (MakeArray (CurrentColumnIndex, CurrentRowIndex, 1)))*0.2) then color(255,0,0) else if (currentfieldvalue >= ((Maximum (MakeArray (CurrentColumnIndex, CurrentRowIndex, 1)))*0.2) and currentfieldvalue < ((Maximum (MakeArray (CurrentColumnIndex, CurrentRowIndex, 1)))*0.4)) then color(255,192,0) else if (currentfieldvalue >= ((Maximum (MakeArray (CurrentColumnIndex, CurrentRowIndex, 1)))*0.4) and currentfieldvalue < ((Maximum (MakeArray (CurrentColumnIndex, CurrentRowIndex, 1)))*0.6)) then color(255,255,0) else if (currentfieldvalue >= ((Maximum (MakeArray (CurrentColumnIndex, CurrentRowIndex, 1)))*0.6) and currentfieldvalue < ((Maximum (MakeArray (CurrentColumnIndex, CurrentRowIndex, 1)))*0.8)) then color(146,208,80) else if (currentfieldvalue >= ((Maximum (MakeArray (CurrentColumnIndex, CurrentRowIndex, 1)))*0.8)) then color(0,176,80) It's not elegant, nor does it work properly, any assistance/suggestions would be much appreciated. I wasn't expecting it to be so complicated as originally I was working with the below assuming it would work, except it tells me that "CurrentFieldValue" is not a field. if CurrentFieldValue < ((Maximum (CurrentFieldValue))*0.2) then color(255,0,0) else if ... etc.

    Read the article

  • Creating a dynamic lacp trunk from HP Procurve 2412zl to Proliant DL380 G7

    - by Maalobs
    I'm configuring an IEEE 802.3ad (LACP) dynamic trunk from a HP Procurve 2412zl (firmware version K.15.07) switch to a HP Proliant DL380 G7 server. The DL380 has 4 NICs and is running Win2008 R2, so I'm teaming the NICs together and leaving everything on the recommended "automatic" setting in the HP NIC configuration tool. The server is one of two, they'll be connected on interfaces F17-F20 and F21-F24 respectively on the switch. I need the servers in a separate VLAN, here is the configuration for the VLAN: vlan 10 name "Lab_Mgmt" untagged B2,F17-F24 ip address 172.22.71.3 255.255.255.0 tagged B21 exit There is a DHCP-relay into the VLAN 10 from another device beyond interface B21. The Advanced Traffic Management Guide says that in order to run a dynamic LACP trunk on another VLAN besides the DEFAULT_VLAN, you need to first enable GVRP and then use "forbid" to stop the interfaces from automatically joining DEFAULT_VLAN when the dynamic trunk is created. GVRP brings some other stuff with it that I don't want or need, so I disable it with "unknown-vlans disable" on all other interfaces. Here is how I do it: procurve-5412zl-1(config)# gvrp procurve-5412zl-1(config)# interface A1-A24,B1-B24,C1-C24,D1-D10,D13-D24,E1-E24, F1-F16,K1,K2 unknown-vlans disable procurve-5412zl-1(config)# vlan 1 forbid F17-F24 procurve-5412zl-1(config)# interface F17-F20 lacp active The result afterwards looks all successful: procurve-5412zl-1(config)# show trunks Load Balancing Method: L3-based (Default), L2-based if non-IP traffic Port | Name Type | Group Type ---- + -------------------------------- --------- + ------ -------- F17 | XYZTEAM3_NIC1 100/1000T | Dyn2 LACP F18 | XYZTEAM3_NIC2 100/1000T | Dyn2 LACP F19 | XYZTEAM3_NIC3 100/1000T | Dyn2 LACP F20 | XYZTEAM3_NIC4 100/1000T | Dyn2 LACP procurve-5412zl-1(config)# vlan 10 procurve-5412zl-1(vlan-10)# show lacp LACP LACP Trunk Port LACP Admin Oper Port Enabled Group Status Partner Status Key Key ---- ------- ------- ------- ------- ------- ------ ------ F17 Active Dyn2 Up Yes Success 0 0 F18 Active Dyn2 Up Yes Success 0 0 F19 Active Dyn2 Up Yes Success 0 0 F20 Active Dyn2 Up Yes Success 0 0 On the Proliant server, the NIC configuration Tool is also indicating that a 802.3ad dynamic trunk has been established. Everything should be good, but it isn't. The server is not getting an IP-address from the DHCP, which it does if I'm not enabling LACP. If I configure the server to a static IP-address on the VLAN 10 subnet, it can't even ping the switch IP-address, much less anything outside of the VLAN. The switch can't ping the server either. I did another attempt with F17-F20 tagged, and checking the box "Default Native Tag (VLAN 10)" in the NIC configuration tool on the server, but there was no difference. Does anyone have any idea what I might have missed?

    Read the article

  • OSX 10.6.6 SSH md5 break-in check

    - by Alex
    Information Recently one of the linux servers that I access was compromised to steal passwords and ssh keys using a modified ssh binary. This lead me to question if the attacker had compromised my OSX Laptop which had ssh access turned on. A sophos virus scan turned up nothing, and I did not have rkhunter installed before the attack, so I could not compare hashes of the system binaries to be sure. However because OSX is relatively standard for each of their major releases, I asked fiends for md5 hashes md5 /usr/bin/ssh and md5 /usr/sbin/sshd as a basic first check to see if there was anything different about my machine. A few emails later I have found the following data: Version (Arch) [N] MD5 (/usr/bin/ssh) MD5 (/usr/sbin/sshd) OSX 10.5.8 (PPC) [3] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.5.8 (intel) [5] 1e9fd483eef23464ec61c815f7984d61 9d32a36294565368728c18de466e69f1 OSX 10.6.x (intel) [7] 591fbe723011c17b6ce41c537353b059 e781fad4fc86cf652f6df22106e0bf0e OSX 10.6.x (intel) [4] 58be068ad5e575c303ec348a1c71d48b 33dafd419194b04a558c8404b484f650 Mine 10.6.6 (intel) df344cc00a294c91230c65e8b7332a79 b5094ccf4cd074aaf573d4f5df75906a where N is the number of machines with with that MD5, and the last row is my laptop. The sample is relatively heterogeneous spaning a few years of different makes and models of Apples, and different versions of 10.6.x. The different hash for my system made me worried that these binaries might have been compromised. So I made sure that my backup for the week was good, and dived into formatting my system and reinstalling OSX. After reinstalling OSX from the manufacturer DVD, I found that the MD5 hash did not change for either ssh, or sshd. Goal Make sure that my system is does not have any malicious software. Should I be worried that this base install of OSX (with no other software installed) has been compromised? I have also updated my system to 10.6.6 and found no change as well. Other Information I am not sure if this is helpful information, but my laptop is a i7 15 inch MacBook Pro bought in Nov 2010, and here is some output from system_profiler: System Software Overview: System Version: Mac OS X 10.6.6 (10J567) Kernel Version: Darwin 10.6.0 64-bit Kernel and Extensions: No Time since boot: 1:37 Hardware: Hardware Overview: Model Name: MacBook Model Identifier: MacBook6,2 Processor Name: Intel Core i7 Processor Speed: 2.66 GHz Number Of Processors: 1 Total Number Of Cores: 2 L2 Cache (per core): 256 KB L3 Cache: 4 MB Memory: 4 GB Processor Interconnect Speed: 4.8 GT/s Boot ROM Version: MBP61.0057.B0C SMC Version (system): 1.58f16 Sudden Motion Sensor: State: Enabled On the laptop, I find: $ codesign -vvv /usr/bin/ssh /usr/bin/ssh: valid on disk /usr/bin/ssh: satisfies its Designated Requirement $ codesign -vvv /usr/sbin/sshd /usr/sbin/sshd: valid on disk /usr/sbin/sshd: satisfies its Designated Requirement $ ls -la /usr/bin/ssh -rwxr-xr-x 1 root wheel 1001520 Feb 11 2010 /usr/bin/ssh $ ls -la /usr/sbin/sshd -rwxr-xr-x 1 root wheel 1304800 Feb 11 2010 /usr/sbin/sshd $ ls -la /sbin/md5 -r-xr-xr-x 1 root wheel 65232 May 18 2009 /sbin/md5 Update So far I have not gotten an answer about this question, but if you could help by increasing the number of hashes that I can compare against, that would be great. To get hashes, and version numbers, run the following on osx: md5 /usr/bin/ssh md5 /usr/sbin/sshd ssh -V sw_vers

    Read the article

  • Best Processor for MediaSmart Server?

    - by Kent Boogaart
    I'm trying to figure out what the best possible processor is that I can stick in my HP MediaSmart server. I'm clueless when it comes to correlating CPUs to motherboards. I suspect it's the socket type I care about, but I worry that there's more to it. CPU-Z gives me (excerpt): Processors Information ------------------------------------------------------------------------- Processor 1 ID = 0 Number of cores 1 (max 1) Number of threads 1 (max 1) Name AMD Sempron LE-1150 Codename Sparta Specification AMD Sempron(tm) Processor LE-1150 Package Socket AM2 (940) CPUID F.F.1 Extended CPUID F.7F Brand ID 1 Core Stepping DH-G1 Technology 65 nm Core Speed 1000.0 MHz Multiplier x FSB 5.0 x 200.0 MHz HT Link speed 800.0 MHz Stock frequency 2000 MHz Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64 L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size L2 cache 256 KBytes, 16-way set associative, 64-byte line size FID/VID Control yes Max FID 10.0x Max VID 1.350 V P-State FID 0x2 - VID 0x12 (5.0x - 1.100 V) P-State FID 0xA - VID 0x0C (9.0x - 1.250 V) P-State FID 0xC - VID 0x0A (10.0x - 1.300 V) K8 Thermal sensor yes K8 Revision ID 6.0 Attached device PCI device at bus 0, device 24, function 0 Attached device PCI device at bus 0, device 24, function 1 Attached device PCI device at bus 0, device 24, function 2 Attached device PCI device at bus 0, device 24, function 3 Chipset ------------------------------------------------------------------------- Northbridge SiS 761GX rev. 02 Southbridge SiS 966 rev. 59 Graphic Interface AGP AGP Revision 3.0 AGP Transfer Rate 8x AGP SBA supported, enabled Memory Type DDR2 Memory Size 2048 MBytes Channels Single Memory Frequency 200.0 MHz (CPU/5) CAS# latency (CL) 5.0 RAS# to CAS# delay (tRCD) 5 RAS# Precharge (tRP) 5 Cycle Time (tRAS) 15 Bank Cycle Time (tRC) 21 Command Rate (CR) 1T DMI ------------------------------------------------------------------------- DMI BIOS vendor Phoenix Technologies, LTD version R03 date 05/08/2008 DMI System Information manufacturer HP product MediaSmart Server version unknown serial CN68330DGH UUID A482007B-B0CC7593-DD11736A-407B7067 DMI Baseboard vendor Wistron model SJD4 revision A.0 serial unknown DMI System Enclosure manufacturer HP chassis type Desktop chassis serial unknown DMI Processor manufacturer AMD model AMD Sempron(tm) Processor LE-1150 clock speed 2000.0 MHz FSB speed 200.0 MHz multiplier 10.0x DMI Memory Controller correction 64-bit ECC Max module size 4096 MBytes DMI Memory Module designation A0 size 2048 MBytes (double bank) DMI Memory Module designation A1 DMI Memory Module designation A2 DMI Memory Module designation A3 DMI Port Connector designation PS/2 Mouse (internal) port type Mouse Port connector PS/2 connector PS/2 DMI Port Connector designation USB0 (external) port type USB DMI Physical Memory Array location Motherboard usage System Memory correction None max capacity 16384 MBytes max# of devices 4 DMI Memory Device designation A0 format DIMM type unknown total width 64 bits data width 64 bits size 2048 MBytes DMI Memory Device designation A1 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A2 format DIMM type unknown total width 64 bits data width 64 bits DMI Memory Device designation A3 format DIMM type unknown total width 64 bits data width 64 bits How do I figure out what options I have for an upgrade?

    Read the article

  • IPv6 routing to another interface

    - by Robert
    I'm trying to get an IPv6 enabled router to forward data from one interface to the other and I'm having issues. When following this example (http://www.cisco.com/en/US/tech/tk872/technologies_configuration_example09186a0080ba6106.shtml) I am able to get full connectivity between all 3 routers in my simulator. However when I try to use only 1 router; I can't get connectivity to the other interfacs on the same router. My PC is directly attached to FA 0/1 and it can ping the router's interface. However it can not ping any other interface on the router(which unless I'm missing something it should be able to do). The router on the other hand can ping everything. I thought static routes might help; but the router already has routes for everything. I'm thinking the packet should come in; router looks up the destination in it's ipv6 routing table and then realizes it's for itself, and should respond. I thought maybe it couldn't respond directly; so I tried pinging a device like 2001:0000:0000:1000::2, but i don't get a response. I'm running on IOS 12.4. I'm missing something(hopefully simple), but I just can't see what it is. With only 1 router; how do I enable my PC to talk to the other subnets? Thank you in advance, Robert Topology: R1 FA 0/0: 2001:0000:0000:0000::1/52 FA 0/1: 2001:0000:0000:1000::1/52 FA 1/0: 2001:0000:0000:2000::1/52 Loopback 0: 2001:0000:0000:3000::1/52 PC: 2001:0000:0000:2000::2/52 PC plugs directly into FA 1/0 on the router. --- Configuration --- ipv6 cef ipv6 unicast routing interface Loopback0 no ip address ipv6 address 2001:0000:0000:3000::1/52 ipv6 enable ! interface FastEthernet0/0 no ip address duplex auto speed auto ipv6 address 2001:0000:0000::1/52 ipv6 enable ! interface FastEthernet0/1 no ip address duplex auto speed auto ipv6 address 2001:0000:0000:1000::1/52 ipv6 enable ! interface FastEthernet1/0 no ip address duplex auto speed auto ipv6 address 2001:0000:0000:2000::1/52 ipv6 enable --- end of config --- --- routing table --- IPV6Lab#show ipv6 route IPv6 Routing Table - 10 entries Codes: C - Connected, L - Local, S - Static, R - RIP, B - BGP U - Per-user Static route I1 - ISIS L1, I2 - ISIS L2, IA - ISIS interarea, IS - ISIS summary O - OSPF intra, OI - OSPF inter, OE1 - OSPF ext 1, OE2 - OSPF ext 2 ON1 - OSPF NSSA ext 1, ON2 - OSPF NSSA ext 2 C 2001:0000:0000::/52 [0/0] via ::, FastEthernet0/0 L 2001:0000:0000::1/128 [0/0] via ::, FastEthernet0/0 C 2001:0000:0000:1000::/52 [0/0] via ::, FastEthernet0/1 L 2001:0000:0000:1000::1/128 [0/0] via ::, FastEthernet0/1 C 2001:0000:0000:2000::/52 [0/0] via ::, FastEthernet1/0 L 2001:0000:0000:2000::1/128 [0/0] via ::, FastEthernet1/0 C 2001:0000:0000:3000::/52 [0/0] via ::, Loopback0 L 2001:0000:0000:3000::1/128 [0/0] via ::, Loopback0 L FE80::/10 [0/0] via ::, Null0 L FF00::/8 [0/0] via ::, Null0 --- end of routing table ---

    Read the article

  • SQL SERVER – SSMS: Backup and Restore Events Report

    - by Pinal Dave
    A DBA wears multiple hats and in fact does more than what an eye can see. One of the core task of a DBA is to take backups. This looks so trivial that most developers shrug this off as the only activity a DBA might be doing. I have huge respect for DBA’s all around the world because even if they seem cool with all the scripting, automation, maintenance works round the clock to keep the business working almost 365 days 24×7, their worth is knowing that one day when the systems / HDD crashes and you have an important delivery to make. So these backup tasks / maintenance jobs that have been done come handy and are no more trivial as they might seem to be as considered by many. So the important question like: “When was the last backup taken?”, “How much time did the last backup take?”, “What type of backup was taken last?” etc are tricky questions and this report lands answers to the same in a jiffy. So the SSMS report, we are talking can be used to find backups and restore operation done for the selected database. Whenever we perform any backup or restore operation, the information is stored in the msdb database. This report can utilize that information and provide information about the size, time taken and also the file location for those operations. Here is how this report can be launched.   Once we launch this report, we can see 4 major sections shown as listed below. Average Time Taken For Backup Operations Successful Backup Operations Backup Operation Errors Successful Restore Operations Let us look at each section next. Average Time Taken For Backup Operations Information shown in “Average Time Taken For Backup Operations” section is taken from a backupset table in the msdb database. Here is the query and the expanded version of that particular section USE msdb; SELECT (ROW_NUMBER() OVER (ORDER BY t1.TYPE))%2 AS l1 ,       1 AS l2 ,       1 AS l3 ,       t1.TYPE AS [type] ,       (AVG(DATEDIFF(ss,backup_start_date, backup_finish_date)))/60.0 AS AverageBackupDuration FROM backupset t1 INNER JOIN sys.databases t3 ON ( t1.database_name = t3.name) WHERE t3.name = N'AdventureWorks2014' GROUP BY t1.TYPE ORDER BY t1.TYPE On my small database the time taken for differential backup was less than a minute, hence the value of zero is displayed. This is an important piece of backup operation which might help you in planning maintenance windows. Successful Backup Operations Here is the expanded version of this section.   This information is derived from various backup tracking tables from msdb database.  Here is the simplified version of the query which can be used separately as well. SELECT * FROM sys.databases t1 INNER JOIN backupset t3 ON (t3.database_name = t1.name) LEFT OUTER JOIN backupmediaset t5 ON ( t3.media_set_id = t5.media_set_id) LEFT OUTER JOIN backupmediafamily t6 ON ( t6.media_set_id = t5.media_set_id) WHERE (t1.name = N'AdventureWorks2014') ORDER BY backup_start_date DESC,t3.backup_set_id,t6.physical_device_name; The report does some calculations to show the data in a more readable format. For example, the backup size is shown in KB, MB or GB. I have expanded first row by clicking on (+) on “Device type” column. That has shown me the path of the physical backup file. Personally looking at this section, the Backup Size, Device Type and Backup Name are critical and are worth a note. As mentioned in the previous section, this section also has the Duration embedded inside it. Backup Operation Errors This section of the report gets data from default trace. You might wonder how. One of the event which is tracked by default trace is “ErrorLog”. This means that whatever message is written to errorlog gets written to default trace file as well. Interestingly, whenever there is a backup failure, an error message is written to ERRORLOG and hence default trace. This section takes advantage of that and shows the information. We can read below message under this section, which confirms above logic. No backup operations errors occurred for (AdventureWorks2014) database in the recent past or default trace is not enabled. Successful Restore Operations This section may not be very useful in production server (do you perform a restore of database?) but might be useful in the development and log shipping secondary environment, where we might be interested to see restore operations for a particular database. Here is the expanded version of the section. To fill this section of the report, I have restored the same backups which were taken to populate earlier sections. Here is the simplified version of the query used to populate this output. USE msdb; SELECT * FROM restorehistory t1 LEFT OUTER JOIN restorefile t2 ON ( t1.restore_history_id = t2.restore_history_id) LEFT OUTER JOIN backupset t3 ON ( t1.backup_set_id = t3.backup_set_id) WHERE t1.destination_database_name = N'AdventureWorks2014' ORDER BY restore_date DESC,  t1.restore_history_id,t2.destination_phys_name Have you ever looked at the backup strategy of your key databases? Are they in sync and do we have scope for improvements? Then this is the report to analyze after a week or month of maintenance plans running in your database. Do chime in with what are the strategies you are using in your environments. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: PostADay, SQL, SQL Authority, SQL Backup and Restore, SQL Query, SQL Server, SQL Server Management Studio, SQL Tips and Tricks, T SQL Tagged: SQL Reports

    Read the article

  • SPARC T4 ??????: SPARC T4 ??????????!!

    - by user13138700
    ?? 2011 ? 9 ?? SPARC T4 CPU ???????? SPARC T4 ????????????????2011??10?????????????????????????? ????????????????????SPARC T4 ?????????????????????????????????????????????????????????? SPARC T4 CPU ???? SPARC T4 ?????????????????????????????????? ??????????????????????4/4, 4/5, 4/6 ? 3???????? Oracle Open World 2012 ???????? Oracle Open World 2012 Tokyo ?? Oracle ?????&????? ??? Oracle Solaris ????????????·????????? SPARC&Solaris ??????????????SPARC&Solaris ????????????????????????????????????????????????????????????????????????? Oracle OpenWorld Tokyo 2012 ???? URL http://www.oracle.com/openworld/jp-ja/index.html ?????? 7264 ??????????????? ????Oracle Open World 2012 Tokyo ?????????????????????????SPARC T4 ????? ????????????????? SPARC T4 ????????? SPARC T3 ????????(S2??)??????????????????????????(S3??)??????????????????? ???????" T " ???????????????(?)?????? SPARC T1/T2/T3 ???????????????????????????(????????)????????????????????????? ?SPARC T4 ????????????????????????????? ?SPARC T4 ???????DB?????????????????????????????? ???????????????? ????????????????????????????????????????????? ???? SPARC T3 ???????????????????????????2???????????? ????????????????????????????????????????????????????? ?????????????? SPARC T4 ????????????????????????????????????SPARC T4 ????????? SPARC T4 ??????????????????????????????????????????? ?????????????? T4 ??????????????????? SPARC ???????????????????????????????????????????????????????????????????&??????????? ?????????????????????????????????????????????????????????Web?????????????DB?????????????????????????????????????? (????????????) ???????????? SPARC T4 ????????????????????????????? < T4 ???????? > ??? SPARC ??(S3??)??? x5??????????????????? x2????????????????????? Crypto (?????)?????????? ?????????????????????????/???????????????? ?????? 1, 2,& 4 ??????????? < T4 ????? ??????? > 8x SPARC S3 ?? (64????/???) 4MB ?? L3 ????? (8???/16???) 8x9 ????? 4x DDR3 ??????????? @6.4Gbps 6x ?????????? @9.6Gbps 2x8 PCIe 2.0 (5GTS) 2x10Gb XAUI ??????? < S3???????????? > ALU : Arithmetic Logic Unit BRU : Branch Logic Unit FGU : Flouting-point Graphics Unit IRF : Integer Register File FRF : Flouting-point Register File WRF : Working Register File MMU : Memory Management Unit LSU : Load Store Unit Crypto(SPU) : Streaming Processing Unit TRU : Trap Logic Unit < S3????????? > ????? 8????/?? ?????? Out-of-Order ?? 16???????????????? ????????????? ???????????? ??????? ????????? 64???? ITLB ? 128???? DTLB 64KB 4??? L1 ?????????????? 128KB 8??? ???? L2 ????? < T4 ???????? vs T3 ???????? > T4 ????????????? Out-Of-Order ???? Pick ???????? In-Order ?? Pick ?????? Commit ??????? Out-Of-Order ?? Commit ?????? In-Order ?? < T4 ?????????? > ???????????vs????????????????????????????? ????????Active??????????????????? ???????????????????????? ??????????????????? < T4vsT1/T2/T3 ??????? > SPARC T4 ???? T3????????Web??????????? DB?????????????????????????????? ????????????????????SPARC T4 ?????&Solaris ?????????????(????????)??????????????????????????????????????????????????????????!!? ????Oracle Open World 2012 Tokyo ????????????????SPARC T4 ?????????????????????? 4/4, 4/5, 4/6 ?3????????????????????????????????????????????????????????????????????????????????????? ????????????????? URL http://www.oracle.com/openworld/jp-ja/exhibit/index.html

    Read the article

  • How to use constraint programming for optimizing shopping baskets?

    - by tangens
    I have a list of items I want to buy. The items are offered by different shops and different prices. The shops have individual delivery costs. I'm looking for an optimal shopping strategy (and a java library supporting it) to purchase all of the items with a minimal total price. Example: Item1 is offered at Shop1 for $100, at Shop2 for $111. Item2 is offered at Shop1 for $90, at Shop2 for $85. Delivery cost of Shop1: $10 if total order < $150; $0 otherwise Delivery cost of Shop2: $5 if total order < $50; $0 otherwise If I buy Item1 and Item2 at Shop1 the total cost is $100 + $90 +$0 = $190. If I buy Item1 and Item2 at Shop2 the total cost is $111 + $85 +$0 = $196. If I buy Item1 at Shop1 and Item2 at Shop2 the total cost is $100 + $10 + $85 + $0 = 195. I get the minimal price if I order Item1 and Item2 at Shop1: $190 What I tried so far I asked another question before that led me to the field of constraint programming. I had a look at cream and choco, but I did not figure out how to create a model to solve my problem. | shop1 | shop2 | shop3 | ... ----------------------------------------- item1 | p11 | p12 | p13 | item2 | p21 | p22 | p23 | . | | | | . | | | | ----------------------------------------- shipping | s1 | s2 | s3 | limit | l1 | l2 | l3 | ----------------------------------------- total | t1 | t2 | t3 | ----------------------------------------- My idea was to define these constraints: each price "p xy" is defined in the domain (0, c) where c is the price of the item in this shop only one price in a line should be non zero if one or more items are bought from one shop and the sum of the prices is lower than limit, then add shipping cost to the total cost shop total cost is the sum of the prices of all items in a shop total cost is the sum of all shop totals The objective is "total cost". I want to minimize this. In cream I wasn't able to express the "if then" constraint for conditional shipping costs. In choco these constraints exist, but even for 5 items and 10 shops the program was running for 10 minutes without finding a solution. Question How should I express my constraints to make this problem solvable for a constraint programming solver?

    Read the article

  • Unable to get index from jQuery UI slider range

    - by Phil.Wheeler
    I'm having a hell of a time trying to get (what I thought was) a simple index from a collection of multiple sliders. The HTML is as follows: <div id="left-values" class="line"> <span id="l1" style="padding: 0 1.8em;">0</span> <span id="l2" style="padding: 0 1.8em;">0</span> <span id="l3" style="padding: 0 1.8em;">0</span> <span id="l4" style="padding: 0 1.8em;">0</span> <span id="l5" style="padding: 0 1.8em;">0</span> <span id="l6" style="padding: 0 1.8em;">0</span> <span id="l7" style="padding: 0 1.8em;">0</span> <span id="l8" style="padding: 0 1.8em;">0</span> </div> And the jQuery code is: // setup audiometry sliders $("#eq > span").each(function (e) { // read initial values from markup and remove that var value = parseInt($(this).text()); // var index = $(this).index; <- this didn't work. $(this).empty(); $(this).slider({ value: value, slide: function (event, ui) { //console.log($(this).attr('id')); <- neither did this. //console.log(index); $('#left-values span:first').text(ui.value); } }) }); The problem is that jQuery UI - when creating a slider - replaces the existing HTML with its own markup. This includes any ID values and, for whatever reason, I can't get the index for a given slider to surface either. So I'm running out of ideas.

    Read the article

  • asp:Button is not calling server-side function

    - by Richard Neil Ilagan
    Hi guys, I know that there has been much discussion here about this topic, but none of the threads I got across helped me solve this problem. I'm hoping that mine is somewhat unique, and may actually merit a different solution. I'm instantiating an asp:Button inside a data-bound asp:GridView through template fields. Some of the buttons are supposed to call a server-side function, but for some weird reason, it doesn't. All the buttons do when you click them is fire a postback to the current page, doing nothing, effectively just reloading the page. Below is a fragment of the code: <asp:GridView ID="gv" runat="server" AutoGenerateColumns="false" CssClass="l2 submissions" ShowHeader="false"> <Columns> <asp:TemplateField> <ItemTemplate><asp:Panel ID="swatchpanel" CssClass='<%# Bind("status") %>' runat="server"></asp:Panel></ItemTemplate> <ItemStyle Width="50px" CssClass="sw" /> </asp:TemplateField> <asp:BoundField DataField="description" ReadOnly="true"> </asp:BoundField> <asp:BoundField DataField="owner" ReadOnly="true"> <ItemStyle Font-Italic="true" /> </asp:BoundField> <asp:BoundField DataField="last-modified" ReadOnly="true"> <ItemStyle Width="100px" /> </asp:BoundField> <asp:TemplateField> <ItemTemplate> <asp:Button ID="viewBtn" cssclass='<%# Bind("sid") %>' runat="server" Text="View" OnClick="viewBtnClick" /> </ItemTemplate> </asp:TemplateField> </Columns> </asp:GridView> The viewBtn above should call the viewBtnClick() function on server-side. I do have that function defined, along with a proper signature (object,EventArgs). One thing that may be of note is that this code is actually inside an ASCX, which is loaded in another ASCX, finally loaded into an ASPX. Any help or insight into the matter will be SO appreciated. Thanks! (oh, and please don't mind my trashy HTML/CSS semantics - this is still in a very,very early stage :p)

    Read the article

  • Tunnel is up but cannot ping directly connected network

    - by drmanalo
    We configured a site-to-site VPN and here is the topology. I control the network on the left but not the one on the right. All devices in our network has public IPs. Server---ASA5505---Cisco887======Internet=====ASA5510---devices I can see the tunnel is up and can do extended ping using a loopback interface. From the 10.175 and 10.165 networks, they can also ping my loopback address. I can also dial in using a Cisco VPN client, and can connect to the devices on the right. #show crypto session Crypto session current status Interface: Vlan3 Profile: xxx-profile Session status: UP-ACTIVE Peer: 213.121.x.x port 500 IKEv1 SA: local 77.245.x.x/500 remote 213.121.x.x/500 Active IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.175.0.0/255.255.128.0 Active SAs: 0, origin: crypto map IPSEC FLOW: permit ip 10.0.20.0/255.255.255.240 10.165.0.0/255.255.192.0 Active SAs: 2, origin: crypto map #ping 10.165.29.39 source loopback 2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.165.29.39, timeout is 2 seconds: Packet sent with a source address of 10.0.20.1 !!!!! Success rate is 100 percent (5/5), round-trip min/avg/max = 16/17/20 ms My problem is the devices on the right cannot reach my server. They could only ping the loopback address and nothing else. I'm pasting some diagnostics related to routing thinking perhaps routing is my issue. I can paste all the running-config on my side of network if needed. #show ip int brief Interface IP-Address OK? Method Status Protocol ATM0 unassigned YES NVRAM administratively down down Ethernet0 unassigned YES NVRAM administratively down down FastEthernet0 unassigned YES unset up up connected to ASA FastEthernet1 unassigned YES unset administratively down down FastEthernet2 unassigned YES unset administratively down down FastEthernet3 unassigned YES unset up up Loopback1 10.0.20.65 YES NVRAM up up Loopback2 10.0.20.1 YES NVRAM up up Virtual-Template1 77.245.x.x YES unset up down Virtual-Template2 77.245.x.x YES unset up down Vlan1 unassigned YES unset down down Vlan3 77.245.x.x YES NVRAM up up connected to the Internet #show run | section ip route ip route 0.0.0.0 0.0.0.0 77.245.x.x ip route 213.121.240.36 255.255.255.255 Vlan3 #show access-list Extended IP access list 102 10 permit ip 10.0.20.0 0.0.0.15 10.175.0.0 0.0.127.255 (3332 matches) 20 permit ip 10.0.20.0 0.0.0.15 10.165.0.0 0.0.63.255 (3498 matches) #show vlan-switch VLAN Name Status Ports ---- -------------------------------- --------- ------------------------------- 1 default active 3 VLAN0003 active Fa0, Fa1, Fa2, Fa3 1002 fddi-default act/unsup 1003 token-ring-default act/unsup 1004 fddinet-default act/unsup 1005 trnet-default act/unsup #show ip route Codes: L - local, C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2 E1 - OSPF external type 1, E2 - OSPF external type 2 i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route, H - NHRP, l - LISP + - replicated route, % - next hop override Gateway of last resort is 77.245.x.x to network 0.0.0.0 S* 0.0.0.0/0 [1/0] via 77.245.x.x 10.0.0.0/8 is variably subnetted, 5 subnets, 3 masks C 10.0.20.0/28 is directly connected, Loopback2 L 10.0.20.1/32 is directly connected, Loopback2 C 10.0.20.64/28 is directly connected, Loopback1 L 10.0.20.65/32 is directly connected, Loopback1 S 10.165.0.0/18 [1/0] via 213.121.x.x 77.0.0.0/8 is variably subnetted, 3 subnets, 3 masks S 77.0.0.0/8 [1/0] via 77.245.x.x C 77.245.x.x/29 is directly connected, Vlan3 L 77.245.x.x/32 is directly connected, Vlan3 213.121.x.0/32 is subnetted, 1 subnets S 213.121.x.x is directly connected, Vlan3 I read some of the posts here which lead to NATing issue but I'not sure of my next step. Should I translate my public address to private and route it to the loopback address? (only guessing) CISCO VPN site to site Site-to-Site VPN between two ASA 5505s only working in one direction Hope someone could help. Thanks in advance!

    Read the article

  • How to diagnose computer lockup/freezing problem

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularlity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Thanks

    Read the article

  • Configuring CESoPSN using Cisco MWR 2941

    - by Rayne
    I'm trying to configure CESoPSN on two Cisco MWR 2941 routers, but the alarm LED lights are always lit. My configuration is modeled after this sample configuration. My setup is as follows: On the Cisco MWRs, E1 0/5 is configured to be CESoPSN, E1 0/9 is configured to be CESoPSN (CAS mode), and E1 0/7 is configured to be SAToP. The two MWRs are connected to each other via the GigabitEthernet port 0/2. The GigE ports are configured as a vlan because the ports are L2 ports and cannot be assigned an IP address directly. The two Cisco MWRs are connected to a traffic simulator, i.e. the traffic simulator will play out E1 traffic to MWR 1 and record the output traffic from MWR 2. On my traffic simulator, when it's connected to the E1 ports 0/5 and 0/9 (both CESoPSN configurations), the "Remote" alarm is on. However, when connected to the E1 ports 0/7 (SAToP configuration), no alarms were on. The GigE connection seems to be working fine (both LED lights on the 2 ports are green). The SAToP configuration seems to be fine too (Left LED is green, right LED is off on both E1 0/7 ports). However, both CESoPSN configurations seem to be not working (Left LED is green, right LED is yellow on both E1 0/5 and 0/9 ports). I don't know if there's anything wrong with my configuration for the CESoPSN, as I'm very new to this. The relevant portions of the configuration are as follows: MWR 1: controller E1 0/5 clock source internal cem-group 5 timeslots 1-31 description E1 CESoPSN example ! controller E1 0/7 clock source internal cem-group 7 unframed description E1 SATOP example ! controller E1 0/9 mode cas clock source internal cem-group 9 timeslots 1-24 description E1 CESoPSN CAS example ! interface Loopback0 ip address 30.30.30.1 255.255.255.255 ! interface GigabitEthernet0/2 switchport access vlan 100 mpls ip ! interface CEM0/5 no ip address cem 5 xconnect 30.30.30.2 305 encapsulation mpls ! ! interface CEM0/7 no ip address cem 7 xconnect 30.30.30.2 307 encapsulation mpls ! ! interface CEM0/9 no ip address cem 9 signaling inband-cas xconnect 30.30.30.2 309 encapsulation mpls ! ! interface Vlan100 ip address 50.50.50.1 255.255.255.0 no ptp enable mpls ip ! no ip classless ip forward-protocol nd ip route 30.30.30.2 255.255.255.255 50.50.50.2 ! MWR 2: controller E1 0/5 clock source internal cem-group 5 timeslots 1-31 description E1 CESoPSN example ! controller E1 0/7 clock source internal cem-group 7 unframed ! controller E1 0/9 mode cas clock source internal cem-group 9 timeslots 1-24 description E1 CESoPSN CAS example ! interface Loopback0 ip address 30.30.30.2 255.255.255.255 ! interface GigabitEthernet0/2 switchport access vlan 100 mpls ip ! interface CEM0/5 no ip address cem 5 xconnect 30.30.30.1 305 encapsulation mpls ! ! interface CEM0/7 no ip address cem 7 xconnect 30.30.30.1 307 encapsulation mpls ! ! interface CEM0/9 no ip address cem 9 signaling inband-cas xconnect 30.30.30.1 309 encapsulation mpls ! ! interface Vlan100 ip address 50.50.50.2 255.255.255.0 no ptp enable mpls ip ! no ip classless ip forward-protocol nd ip route 30.30.30.1 255.255.255.255 50.50.50.1 ! If anyone is familiar with CESoPSN configurations, please advise.

    Read the article

  • Oracle Virtual Server OEL vm fails to start - kernel panic on cpu identify

    - by Towndrunk
    I am in the process of following a guide to setup various oracle vm templates, so far I have installed OVS 2. 2 and got the OVM Manager working, imported the template for OEL5U5 and created a vm from it.. the problem comes when starting that vm. The log in the OVMM console shows the following; Update VM Status - Running Configure CPU Cap Set CPU Cap: failed:<Exception: failed:<Exception: ['xm', 'sched-credit', '-d', '32_EM11g_OVM', '-c', '0'] => Error: Domain '32_EM11g_OVM' does not exist. StackTrace: File "/opt/ovs-agent-2.3/OVSXXenVMConfig.py", line 2531, in xen_set_cpu_cap run_cmd(args=['xm', File "/opt/ovs-agent-2.3/OVSCommons.py", line 92, in run_cmd raise Exception('%s => %s' % (args, err)) The xend.log shows; [2012-11-12 16:42:01 7581] DEBUG (DevController:139) Waiting for devices vtpm [2012-11-12 16:42:01 7581] INFO (XendDomain:1180) Domain 32_EM11g_OVM (3) unpaused. [2012-11-12 16:42:03 7581] WARNING (XendDomainInfo:1907) Domain has crashed: name=32_EM11g_OVM id=3. [2012-11-12 16:42:03 7581] ERROR (XendDomainInfo:2041) VM 32_EM11g_OVM restarting too fast (Elapsed time: 11.377262 seconds). Refusing to restart to avoid loops .> [2012-11-12 16:42:03 7581] DEBUG (XendDomainInfo:2757) XendDomainInfo.destroy: domid=3 [2012-11-12 16:42:12 7581] DEBUG (XendDomainInfo:2230) Destroying device model [2012-11-12 16:42:12 7581] INFO (image:553) 32_EM11g_OVM device model terminated I have set_on_crash="preserve" in the vm.cfg and have then run xm create -c to get the console screen while booting and this is the log of what happens.. Started domain 32_EM11g_OVM (id=4) Bootdata ok (command line is ro root=LABEL=/ ) Linux version 2.6.18-194.0.0.0.3.el5xen ([email protected]) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Mon Mar 29 18:27:00 EDT 2010 BIOS-provided physical RAM map: Xen: 0000000000000000 - 0000000180800000 (usable)> No mptable found. Built 1 zonelists. Total pages: 1574912 Kernel command line: ro root=LABEL=/ Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Xen reported: 1600.008 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Software IO TLB disabled Memory: 6155256k/6299648k available (2514k kernel code, 135548k reserved, 1394k data, 184k init) Calibrating delay using timer specific routine.. 4006.42 BogoMIPS (lpj=8012858) Security Framework v1.0.0 initialized SELinux: Initializing. selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 16K (64 bytes/line) CPU: L2 Cache: 2048K (64 bytes/line) general protection fault: 0000 [1] SMP last sysfs file: CPU 0 Modules linked in: Pid: 0, comm: swapper Not tainted 2.6.18-194.0.0.0.3.el5xen #1 RIP: e030:[ffffffff80271280] [ffffffff80271280] identify_cpu+0x210/0x494 RSP: e02b:ffffffff80643f70 EFLAGS: 00010212 RAX: 0040401000810008 RBX: 0000000000000000 RCX: 00000000c001001f RDX: 0000000000404010 RSI: 0000000000000001 RDI: 0000000000000005 RBP: ffffffff8063e980 R08: 0000000000000025 R09: ffff8800019d1000 R10: 0000000000000026 R11: ffff88000102c400 R12: 0000000000000000 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffffffff805d2000(0000) knlGS:0000000000000000 CS: e033 DS: 0000 ES: 0000 Process swapper (pid: 0, threadinfo ffffffff80642000, task ffffffff804f4b80) Stack: 0000000000000000 ffffffff802d09bb ffffffff804f4b80 0000000000000000 0000000021100800 0000000000000000 0000000000000000 ffffffff8064cb00 0000000000000000 0000000000000000 Call Trace: [ffffffff802d09bb] kmem_cache_zalloc+0x62/0x80 [ffffffff8064cb00] start_kernel+0x210/0x224 [ffffffff8064c1e5] _sinittext+0x1e5/0x1eb Code: 0f 30 b8 73 00 00 00 f0 0f ab 45 08 e9 f0 00 00 00 48 89 ef RIP [ffffffff80271280] identify_cpu+0x210/0x494 RSP ffffffff80643f70 0 Kernel panic - not syncing: Fatal exception clear as mud to me. are there any other logs that will help me? I have now deployed another vm from the same template and used the default vm settings rather than adding more memory etc - I get exactly the same error.

    Read the article

  • How to diagnose computer lockups and freezes?

    - by Scott Mitchell
    I built a desktop computer a couple years back with the following specs: CPU: Intel Core 2 Quad Q9300 Yorkfield 2.5GHz 6 MB L2 Cache LGA 775 95W Quad-Core Processor BX80580Q9300 Motherboard: EVGA 122-CK-NF68-T1 LGA 775 NVIDIA nForce 680i SLI ATX Intel Motherboard Video Card: Two EVGA 256-P2-N758-TR GeForce 8600GT SCC 256 MB 128-bit GDDR3 PCI Express x16 SLI Supported Video Card PSU: SeaSonic S12 Energy Plus SS-550HT 550W ATX12V V2.3 / EPS12V V2.91 SLI Certified CrossFire Ready 80 PLUS Certified Active PFC Power Supply Memory: Two G.SKILL 4 GB (2 x 2 GB) 240-Pin DDR2 SDRAM DDR2 800 (PC2 6400) Dual Channel Kit Desktop Memory Model F2-6400CL5D-4GBPQ Since its inception, the machine has periodically locked up, the regularity having varied over the years from once a day to once a month. Typically, lockups happen once every few days. By "lockup" I mean my computer just freezes. The screen locks up, I can't move the mouse. Hitting keys on my keyboard that normally turn LEDs on or off on the keyboard (such as Caps Lock) no longer turn the LEDs on or off. If there was music playing at the time of the lockup, noise keeps coming out of the speakers, but it's just the current frequency/note that plays indefinitely. There is no BSOD. When such a lockup occurs I have to do a hard reboot by either turning off the computer or hitting the reset button. I have the most recent version of the NVIDIA hardware drivers, and update them semi-regularly, but that hasn't seemed to help. I am currently using Windows 7 x64, but was previously using Windows Server 2003 x64 and having the same lockup issues. My guess is that it's somehow video driver or motherboard related, but I don't know how to go about diagnosing this problem to narrow down which of the two is the culprit. Additional information re: cooling Regarding cooling... I've not installed any after-market cooling systems aside from two regular fans I scavenged from an older computer. The fan atop the CPU is the one that shipped with it. One of the two scavenged fans I added it located at the bottom tower of the corner, in an attempt to create some airflow from front to back. The second fan is pointed directly at the two video cards. SpeedFan installation and readings Per studiohack's suggestion, I installed SpeedFan, which provided the following temperature readings: GPU: 63C GPU: 65C System: 76C CPU: 64C AUX: 36C Core 0: 78C Core 1: 76C Core 2: 79C Core 3: 79C Update #3: Another Lockup :-( Well, I had another lockup last night. :-( SpeedFan reported the CPU temp at 38 C when it happened, and there was no spike in temperature leading up to the freeze. One thing I notice is that the freeze seems more likely to happen if I am watching a video. In fact, of the last 5 freezes over the past month, 4 of them have been while watching a video on Flickr. Not necessarily the same video, but a video nevertheless. I don't know if this is just coincidence or if it means anything. (As an aside, each night before bedtime my 2 year old daughter sits on my lap and watches some home videos on Flickr and, in the last month, has learned the phrase, "Uh oh, computer broke.") Update #4: MemTest86 and 3DMark06 Test Results: Per suggestions in the comments, I ran the MemTest86 overnight and it cycled through the 8 GB of memory 5 times without error. I also ran the 3DMark06 test without a problem (see my scores at http://3dmark.com/3dm06/15163549). So... what now? :-) Any further suggestions on what to check? Is there some way to get a stack trace or something when the computer locks like that? Resolution I have never did figure out the particular problems, but based on the suggestions here and elsewhere, I'm presuming it was a motherboard issue. In any event, I recently upgraded my system, buying a new motherbeard, PSU, CPU, and RAM, and that new rig has been working splendidly the past several weeks. I am using the same graphic cards as in the old setup, so I think it's safe to reason that they weren't the cause of the problem.

    Read the article

  • Installing Lubuntu 14.04.1 forcepae fails

    - by Rantanplan
    I tried to install Lubuntu 14.04.1 from a CD. First, I chose Try Lubuntu without installing which gave: ERROR: PAE is disabled on this Pentium M (PAE can potentially be enabled with kernel parameter "forcepae" ... Following the description on https://help.ubuntu.com/community/PAE, I used forcepae and tried Try Lubuntu without installing again. That worked fine. dmesg | grep -i pae showed: [ 0.000000] Kernel command line: file=/cdrom/preseed/lubuntu.seed boot=casper initrd=/casper/initrd.lz quiet splash -- forcepae [ 0.008118] PAE forced! On the live-CD session, I tried installing Lubuntu double clicking on the install button on the desktop. Here, the CD starts running but then stops running and nothing happens. Next, I rebooted and tried installing Lubuntu directly from the boot menu screen using forcepae again. After a while, I receive the following error message: The installer encountered an unrecoverable error. A desktop session will now be run so that you may investigate the problem or try installing again. Hitting Enter brings me to the desktop. For what errors should I search? And how? Finally, I rebooted once more and tried Check disc for defects with forcepae option; no errors have been found. Now, I am wondering how to find the error or whether it would be better to follow advice c in https://help.ubuntu.com/community/PAE: "Move the hard disk to a computer on which the processor has PAE capability and PAE flag (that is, almost everything else than a Banias). Install the system as usual but don't add restricted drivers. After the install move the disk back." Thanks for some hints! Perhaps some of the following can help: On Lubuntu 12.04: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB fdiv_bug : no hlt_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr mce cx8 mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe up bts est tm2 bogomips : 1284.76 clflush size : 64 cache_alignment : 64 address sizes : 32 bits physical, 32 bits virtual power management: uname -a Linux humboldt 3.2.0-67-generic #101-Ubuntu SMP Tue Jul 15 17:45:51 UTC 2014 i686 i686 i386 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 12.04.5 LTS Release: 12.04 Codename: precise cpuid eax in eax ebx ecx edx 00000000 00000002 756e6547 6c65746e 49656e69 00000001 000006d6 00000816 00000180 afe9f9bf 00000002 02b3b001 000000f0 00000000 2c04307d 80000000 80000004 00000000 00000000 00000000 80000001 00000000 00000000 00000000 00000000 80000002 20202020 20202020 65746e49 2952286c 80000003 6e655020 6d756974 20295228 7270204d 80000004 7365636f 20726f73 30352e31 007a4847 Vendor ID: "GenuineIntel"; CPUID level 2 Intel-specific functions: Version 000006d6: Type 0 - Original OEM Family 6 - Pentium Pro Model 13 - Stepping 6 Reserved 0 Brand index: 22 [not in table] Extended brand string: " Intel(R) Pentium(R) M processor 1.50GHz" CLFLUSH instruction cache line size: 8 Feature flags afe9f9bf: FPU Floating Point Unit VME Virtual 8086 Mode Enhancements DE Debugging Extensions PSE Page Size Extensions TSC Time Stamp Counter MSR Model Specific Registers MCE Machine Check Exception CX8 COMPXCHG8B Instruction SEP Fast System Call MTRR Memory Type Range Registers PGE PTE Global Flag MCA Machine Check Architecture CMOV Conditional Move and Compare Instructions FGPAT Page Attribute Table CLFSH CFLUSH instruction DS Debug store ACPI Thermal Monitor and Clock Ctrl MMX MMX instruction set FXSR Fast FP/MMX Streaming SIMD Extensions save/restore SSE Streaming SIMD Extensions instruction set SSE2 SSE2 extensions SS Self Snoop TM Thermal monitor 31 reserved TLB and cache info: b0: unknown TLB/cache descriptor b3: unknown TLB/cache descriptor 02: Instruction TLB: 4MB pages, 4-way set assoc, 2 entries f0: unknown TLB/cache descriptor 7d: unknown TLB/cache descriptor 30: unknown TLB/cache descriptor 04: Data TLB: 4MB pages, 4-way set assoc, 8 entries 2c: unknown TLB/cache descriptor On Lubuntu 14.04.1 live-CD with forcepae: cat /proc/cpuinfo processor : 0 vendor_id : GenuineIntel cpu family : 6 model : 13 model name : Intel(R) Pentium(R) M processor 1.50GHz stepping : 6 microcode : 0x17 cpu MHz : 600.000 cache size : 2048 KB physical id : 0 siblings : 1 core id : 0 cpu cores : 1 apicid : 0 initial apicid : 0 fdiv_bug : no f00f_bug : no coma_bug : no fpu : yes fpu_exception : yes cpuid level : 2 wp : yes flags : fpu vme de pse tsc msr pae mce cx8 sep mtrr pge mca cmov clflush dts acpi mmx fxsr sse sse2 ss tm pbe bts est tm2 bogomips : 1284.68 clflush size : 64 cache_alignment : 64 address sizes : 36 bits physical, 32 bits virtual power management: uname -a Linux lubuntu 3.13.0-32-generic #57-Ubuntu SMP Tue Jul 15 03:51:12 UTC 2014 i686 i686 i686 GNU/Linux lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 14.04.1 LTS Release: 14.04 Codename: trusty cpuid CPU 0: vendor_id = "GenuineIntel" version information (1/eax): processor type = primary processor (0) family = Intel Pentium Pro/II/III/Celeron/Core/Core 2/Atom, AMD Athlon/Duron, Cyrix M2, VIA C3 (6) model = 0xd (13) stepping id = 0x6 (6) extended family = 0x0 (0) extended model = 0x0 (0) (simple synth) = Intel Pentium M (Dothan B1) / Celeron M (Dothan B1), 90nm miscellaneous (1/ebx): process local APIC physical ID = 0x0 (0) cpu count = 0x0 (0) CLFLUSH line size = 0x8 (8) brand index = 0x16 (22) brand id = 0x16 (22): Intel Pentium M, .13um feature information (1/edx): x87 FPU on chip = true virtual-8086 mode enhancement = true debugging extensions = true page size extensions = true time stamp counter = true RDMSR and WRMSR support = true physical address extensions = false machine check exception = true CMPXCHG8B inst. = true APIC on chip = false SYSENTER and SYSEXIT = true memory type range registers = true PTE global bit = true machine check architecture = true conditional move/compare instruction = true page attribute table = true page size extension = false processor serial number = false CLFLUSH instruction = true debug store = true thermal monitor and clock ctrl = true MMX Technology = true FXSAVE/FXRSTOR = true SSE extensions = true SSE2 extensions = true self snoop = true hyper-threading / multi-core supported = false therm. monitor = true IA64 = false pending break event = true feature information (1/ecx): PNI/SSE3: Prescott New Instructions = false PCLMULDQ instruction = false 64-bit debug store = false MONITOR/MWAIT = false CPL-qualified debug store = false VMX: virtual machine extensions = false SMX: safer mode extensions = false Enhanced Intel SpeedStep Technology = true thermal monitor 2 = true SSSE3 extensions = false context ID: adaptive or shared L1 data = false FMA instruction = false CMPXCHG16B instruction = false xTPR disable = false perfmon and debug = false process context identifiers = false direct cache access = false SSE4.1 extensions = false SSE4.2 extensions = false extended xAPIC support = false MOVBE instruction = false POPCNT instruction = false time stamp counter deadline = false AES instruction = false XSAVE/XSTOR states = false OS-enabled XSAVE/XSTOR = false AVX: advanced vector extensions = false F16C half-precision convert instruction = false RDRAND instruction = false hypervisor guest status = false cache and TLB information (2): 0xb0: instruction TLB: 4K, 4-way, 128 entries 0xb3: data TLB: 4K, 4-way, 128 entries 0x02: instruction TLB: 4M pages, 4-way, 2 entries 0xf0: 64 byte prefetching 0x7d: L2 cache: 2M, 8-way, sectored, 64 byte lines 0x30: L1 cache: 32K, 8-way, 64 byte lines 0x04: data TLB: 4M pages, 4-way, 8 entries 0x2c: L1 data cache: 32K, 8-way, 64 byte lines extended feature flags (0x80000001/edx): SYSCALL and SYSRET instructions = false execution disable = false 1-GB large page support = false RDTSCP = false 64-bit extensions technology available = false Intel feature flags (0x80000001/ecx): LAHF/SAHF supported in 64-bit mode = false LZCNT advanced bit manipulation = false 3DNow! PREFETCH/PREFETCHW instructions = false brand = " Intel(R) Pentium(R) M processor 1.50GHz" (multi-processing synth): none (multi-processing method): Intel leaf 1 (synth) = Intel Pentium M (Dothan B1), 90nm

    Read the article

  • CodePlex Daily Summary for Sunday, April 11, 2010

    CodePlex Daily Summary for Sunday, April 11, 2010New ProjectsArkzia: This Silverlight game.CodePlex Wiki Editor: CodePlex Wiki Editor makes it easier for CodePlex users to create their wiki documentations. This project offer a rich interface for the edition...Evaluate: Evaluate & Comet DWR like .NET library with powerfull Evaluate and Ajax Comet support. Also, you may use Evaluate library in your own .Net applicat...FamAccountor: 家庭记账薄Horadric: This is common tools freamwork!K8061.Managed: This is a solution to use the Velleman Extended K8061 USB Interface board with .net and to have a nice wrapper handling most of the overhead for us...Latent semantic analysis: all you need is to use!: Baggr is feed aggregator with web interface, user rating and LSA filter. Enjoy it!LIF7 ==> RISK : TOWER DEFENSE: Université Lyon 1, L2 MATH-INFO 2009-2010 Semestre de printemps Projet RISK : TOWER DEFENSE Membres : Jessica El Melhem, Vincent Sébille, et Jonat...Managed ESL Suite: Managed ESL Suite using C# for FreeSWITCH Omni-Tool - A program version concept of the tool used in Mass Effect.: A program version concept of the tool used in Mass Effect. It will support little apps (plugins) that run inside the UI. Its talor mainly at develo...PdxCodeCamp: Web application for Portland Code CampProjeto Vírus: Desenvolvimento do Jogo Virus em XNAsilverlight control - stars with rounded corners: Draw stars and cogs including rounded cornersSilverlight MathParser: Implementation of mathematical expressions parser to compute and functions.turing machine simulator: Project for JCE in course SW engeenering. Turing Machine simulator with GUI.WpD - Wallpapers Downloader: You can easy download wallpapers to your computer without any advertising or registration. On 5 minutes you can download so many wallpapers!New ReleasesAJAX Control Framework: v1.0.0.0: New AJAX project that helps you create AJAX enabled controls. Make use of control level AJAX methods, a Script Manager that works like you'd expect...AutoFixture: Version 1.1: This is version 1.1 of AutoFixture. This release contains no known bugs. Compared to Release Candidate 1 for version 1.1, there are no changes. Ho...AutoPoco: AutoPoco 0.3: Method Invocation in configuration Custom type providers during configuration Method invocation for generationBacicworx (Basic Services Framework): 3.0.10.410 (Beta): Major update, winnowing, and recode of the library. Removed redundant classses and methods which have similar functionality to those available in ...Bluetooth Radar: Version 1.5: Mostly UI and Animation Changes.BUtil: BUtil 4.9: 1. Icons of kneo are almost removed 2. Deployment was moved to codeplex.com 3. Adding of storages was unavailable when any of storages are used FIXEDcrudwork library: crudwork 2.2.0.3: few bug fixes new object viewer - allow the user to view and change an object through the property grid and/or the simple XML editor pivot table ...EnhSim: Release v1.9.8.5: Release v1.9.8.5Removed the debugging output from the Armor Penetration change.EnhSim: Release v1.9.8.6: Release v1.9.8.6Updated release to include the correct version of EnhSimGUIEvaluate: Evaluate Library: This file contains Evaluate library source code under Visual Studio project. Also, there is a sample project to see the use.ExcelDna: ExcelDna Version 0.25: This is an important bugfix release, with the following changes: Fix case where unpacked .config temp file might not be deleted. Fix compiler pro...FamAccountor: 家庭账薄 预览版v0.0.1: 家庭账薄 预览版v0.0.1 该版本提供基本功能,还有待扩展! Feature: 实现基本添加、编辑、删除功能。FamAccountor: 家庭账薄 预览版v0.0.2: 家庭账薄 预览版v0.0.2 该版本提供基本功能,还有待扩展! Feature: 添加账户管理功能。Folder Bookmarks: Folder Bookmarks 1.4.2: This is the latest version of Folder Bookmarks (1.4.2), with general improvements. It has an installer - it will create a directory 'CPascoe' in My...GKO Libraries: GKO Libraries 0.3 Beta: Added Silverlight support for Gko.Utils Added ExtensionsHash Calculator: HashCalculator 1.2: HashCalculator 1.2HD-Trailers.NET Downloader: Version: TrailersOnly if set to 'true' only titles with 'trailer' in the title will be download MinTrailerSize Added a minimum trailer size, this avoids t...Home Access Plus+: v3.2.6.0: v3.2.5.1 Release Change Log: Add lesson naming Fixed a bug in the help desk which was rendering the wrong URL for tickets Planning has started ...HTML Ruby: 6.20.0: All new concept, all new code. Because this release does not support complex ruby annotations, "Furigana Injector" is not supported by this release...HTML Ruby: 6.20.1: Fixed problem where ruby with closed tags but no rb tag will result in empty page Added support for complex ruby annotation (limited single ruby)...K8061.Managed: K8061.Managed: This is a pre-compilled K8061.Managed.DLL file release 1.0.Kooboo CMS: Kooboo CMS 2.1.0.0: Users of Kooboo CMS 2.0, please use the "Check updates" feature under System to upgrade New featuresWebDav support You can now use tools like w...Kooboo forum: Kooboo Forum Module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Kooboo GoogleAnalytics: Kooboo GoogleAnalytics Module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Kooboo wiki: Kooboo CMS Wiki module for 2.1.0.0: Compatible with Kooboo cms 2.1.0.0 Upgrade to MVC 2Mavention: Mavention Simple SiteMapPath: Mavention Simple SiteMapPath is a custom control that renders breadcrumbs as an unordered list what makes it a perfect solution for breadcrumbs on ...MetaSharp: MetaSharp v0.3: MetaSharp v0.3 Roadmap: Oslo Independence Custom Grammar library Improved build environment dogfooding Project structure simplificationsRoTwee: RoTwee (10.0.0.7): New feature of this version is support for mouse wheel. You can rotate tweets rotating mouse wheel.silverlight control - stars with rounded corners: first step: These are the first examples.Silverlight MathParser: Silverlight MathParser 1.0: Implementation of mathematical expressions parser to compute and functions.SimpleGeo.NET: SimpleGeo.NET example website project: ConfigurationYou must change these three configuration values in AppSettings.config: Google Maps API key: for the maps on the test site. Get one he...StickyTweets: 0.6.0: Version 0.6.0 Code - PERFORMANCE Hook into Async WinInet to perform async requests without adding an additional thread Code - Verify that async r...System.Html: Version 1.3; fixed bugs and improved performance: This release incorporates bug fixes, a new normalize method proposed by RudolfHenning of Codeplex.VCC: Latest build, v2.1.30410.0: Automatic drop of latest buildVFPX: FoxTabs 0.9.2: The following issues were addressed: 26744 24954 24767Visual Studio DSite: Advanced Guessing Number Game (Visual C++ 2008): A guessing number game made in visual c 2008.WpD - Wallpapers Downloader: WpD v0.1: My first release, I hope you enjoyMost Popular ProjectsWBFS ManagerRawrASP.NET Ajax LibraryMicrosoft SQL Server Product Samples: DatabaseAJAX Control ToolkitSilverlight ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesFacebook Developer ToolkitMost Active ProjectsRawrnopCommerce. Open Source online shop e-commerce solution.AutoPocopatterns & practices – Enterprise LibraryShweet: SharePoint 2010 Team Messaging built with PexFarseer Physics EngineNB_Store - Free DotNetNuke Ecommerce Catalog ModuleIonics Isapi Rewrite FilterBlogEngine.NETBeanProxy

    Read the article

  • CodePlex Daily Summary for Friday, April 09, 2010

    CodePlex Daily Summary for Friday, April 09, 2010New Projects(SocketCoder) Free Silverlight Voice/Video Conferencing Modules: The Goal of this project is to provide complete Open Source Voice/Video Chatting Client/Server Modules Using Silverlight techniques, this project i...AJAX Control Framework: Do PageMethods and the UpdatePanel make you feel dirty? Think making AJAX enabled custom ASP.NET controls should WAY easier than it is? Wish ASP.NE...Bluetooth Radar: WPF 4.0 Application working with The final release of 32feet.net (v2.2) to Discover Bluetooth devices, send files and more cool stuff for Bluetooth...Bomberman: Bomberman c++ Project Code Library: This is just a personal storage place for a utility library containing extension methods, new classes, and/or improvements to existing classes.DianPing.com MogileFS Client: MogileFS Client for .Net 2.0Dirty City Hearts Website: Dirty City Hearts WebsiteDocGen - SharePoint 2010 Bulk Document Loader: DocGen is a SharePoint 2010 multithreaded console application for bulk loading sample documents into SharePoint. This program generates Microsoft ...dou24: WebSite for DOUExplora: Explora es un navegador de archivos que no pretende ser un sustituto del explorador de Windows, sino un experimento de codificación que compartir c...HobbyBrew Mobile: This project is basic beer brewing software for Windows Mobile able to read HobbyBrew xml files. Developed in C# and Windows FormsjLight: Interop between Silverlight and the javascript based on jQuery. The syntax used in Silverlight is as close as posible to the jQuery syntax.johandekoning.nl samples: Sample code project which are discussed on johandekoning.nl / johandekoning.com. Most examples are / will be developed with C#Kanban: this is a agile paroject managementMETAR.NET Decoder: Project libraries used to decode airport METAR weather information into adequate data types, change them and back, create resulting METAR informati...Micro Framework: MFDeploy with Set/Get mote SKU ID: This is a modification to the Micro Framework's MFDeploy utility that lets the user set and get the mote's ID (aka SKU). It can be done via the GUI...MobySharp: MobySharp is a implementation of the Mobypicture.com API written in C#NGilead: NGilead permits you to use your NHibernate POCO (and especially the partially loaded ones) outside the .NET Virtual Machine (to Silverlight for exa...OpenIdPortableArea: OpenIdPortableArea is an MvcContrib powered Portable Area that encapsulates logic for implementing OpenId encapsulation (using DotNetOpenAuth).OrderToList Extension for IEnumerable: An extension method for IEnumerable<T> that will sort the IEnumerable based on a list of keys. Suppose you have a list of IDs {10, 5, 12} and wa...project3140.org: Code repository for project3140.org.Prometheus Backup Solution: The Prometheus Backup Solution is a free and small Backup Utility for personal use and for small businesses.Roids: an asteroids clone for Silverlight and XNA: An example of a simple game cross-compiling for both Silverlight and XNA using SilverSprite.SemanticAnalyzer: 3rd phase of Compiler Design ProjectSSRS SDK for PHP: SQL Server Reporting Service SDK for PHPWorking Memory Workout: Working Memory Workout is a working memory training game based on the N-back, a task researchers say may improve fluid intelligence. It greatly ex...Wouters Code Samples: This Project will host some of my sample projects I created. I'm a professional SharePoint/BizTalk developer so most of the provided samples will ...New Releases(SocketCoder) Free Silverlight Voice/Video Conferencing Modules: Silverlight Voice Video Chat Modules: Client/Server Silverlight Voice Video Chat ModulesAccessibilityChecker: Accessibility Checker V0.2: Accessibility Checker V0.2 - Direct url´s input functionality added - XHTML, WAI validation modules, easy to extend. (W3C and Achecker modules incl...AStar.net: AStar.net 1.1 downloads: AStar.net 1.1 Version detailsGreatly improved path finding speed and memory usage from version 1.0. Avalaible downloads:AStar.net 1.1 dll - Runtim...AutoPoco: AutoPoco 0.2: This release will bring some non-generic alternatives to configuration + some more automatic configuration options such as assembly scanningBluetooth Radar: Version 1: Basic version only with the ability to discover Bluetooth devices around you.Convert-Media PowerShell Module for Expression Encoder: Release 1.0.0.2: This is a build that incorporates the latest change sets including perform publish. No other changesDevTreks -social budgeting that improves lives and livelihoods: Social Budgeting Web Software, DevTreks alpha 3e: Alpha 3e is a general debug. It also upgrades the software's family budgeting capabilities, including the addition of a new 'Food Nutrition Input'...dV2t Enterprise Library: dV2tEntLib 1.0.0.3: dV2tEntLib 1.0.0.3EnhSim: Release v1.9.8.3: Release v1.9.8.3 Change Armour Penetration calcs to apply the "Rouncer fix" (current version displays debug info to assist users in testing that th...HouseFly controls: HouseFly controls alpha 0.9: HouseFly controls 0.9 alpha binaries (Includes HouseFly.Classes and HouseFly.Controls).Jitbit WYSWYG BBCode Editor: Release: ReleaseMicro Framework: MFDeploy with Set/Get mote SKU ID: MFDeploy with get, set mote ID: The Micro Framework 4.0 MFDeploy, modified to let the user get & set the mote IDMobySharp: MobySharp 1.0: Initial ReleaseOpenIdPortableArea: OpenIdPortableArea: OpenIdPortableArea.Release: DotNetOpenAuth.dll DotNetOpenAuth.xml MvcContrib.dll MvcContrib.xml OpenIdPortableArea.dll OpenIdPortableAre...OrderToList Extension for IEnumerable: Release 0.9b: I'm calling this 0.9 because I came up with it yesterday and there's little real word use so there's probably something that needs fixing or improv...Prometheus Backup Solution: Prometheus BETA: Actual BETA Release. Restore Functions are not available...Reusable Library: V1.0.6: A collection of reusable abstractions for enterprise application developer.Reusable Library Demo: V1.0.4: A demonstration of reusable abstractions for enterprise application developerSharePoint Labs: SPLab4005A-FRA-Level100: SPLab4005A-FRA-Level100 This SharePoint Lab will teach you the 5th best practice you should apply when writing code with the SharePoint API. Lab La...SharePoint Labs: SPLab6001A-FRA-Level200: SPLab6001A-FRA-Level200 This SharePoint Lab will teach you how to create a generic Feature Receiver within Visual Studio. Creating a Feature Receiv...SharePoint LogViewer: SharePoint LogViewer 2.0: Supports live Farm monitoring. Many bug fixes.Simple Savant: Simple Savant v0.5: Added support for custom constraint/validation logic (See Versioning and Consistency) Added support for reliable cross-domain writes (See Version...SQL Server Extended Properties Quick Editor: Release 1.6.1: Whats new in 1.6.1: Add an edit form to support long text editing. double click to open editor. Add an ORM extended properties initializer to creat...SSRS SDK for PHP: SSRS SDK for PHP: Current release includes the SSRSReport library to connect to SQL Server Reporting Services and a sample application to show the basic steps needed...Table Storage Backup & Restore for Windows Azure: Table Storage Backup 1.0.3751: Bug fix: Crash when creating a table if the existing table had not finished deleting. Bug fix: Incorrect batch URI if the storage account ended in ...VCC: Latest build, v2.1.30408.0: Automatic drop of latest buildVisual Studio DSite: Audio Player (Visual C++ 2008): An audio player that can play wav files.Working Memory Workout: Working Memory Workout 1.0: Working Memory Workout is a working memory trainer based on the N-back memory task.Wouters Code Samples: XMLReceiveCBR: This is a Custom Pipeline component. It will help you create a Content Based Routing solution in combination of a WCF Requst/Response service. Gene...Xen: Graphics API for XNA: Xen 1.8: Version 1.8 (XNA 3.1) This update fixes a number of bugs in several areas of the API and introduces a large new Tutorial. [Added] L2 Spherical Ha...Most Popular ProjectsWBFS ManagerRawrMicrosoft SQL Server Product Samples: DatabaseASP.NET Ajax LibrarySilverlight ToolkitAJAX Control ToolkitWindows Presentation Foundation (WPF)ASP.NETMicrosoft SQL Server Community & SamplesFacebook Developer ToolkitMost Active ProjectsnopCommerce. Open Source online shop e-commerce solution.Shweet: SharePoint 2010 Team Messaging built with PexRawrAutoPocopatterns & practices – Enterprise LibraryIonics Isapi Rewrite FilterNB_Store - Free DotNetNuke Ecommerce Catalog ModuleFacebook Developer ToolkitFarseer Physics EngineNcqrs Framework - The CQRS framework for .NET

    Read the article

< Previous Page | 5 6 7 8 9 10  | Next Page >