multiple databases - Page 9

Syncing multiple iPods with the same iTunes library

- by oo

Can you sync mutiple iPods with the sames iTunes library? I would like to keep just music on my iPod nano, but have both music and videos on my iPod touch. Is this even possible?

Separate brightness/power-saving settings for multiple monitors

At home, I connect my laptop to an external monitor. Under Linux X server, it works perfectly. Occasionally I watch a movie on the external monitor. When I do, I would like to fold the laptop shut, and just relax. This however triggers my settings for dimming the screen after 10 minutes of inactivity, which in turn extends to the external monitor. I know I could solve the problem by setting dimming to "Never", but this is a waste, causes the laptop to overheat, and is bad for the normal laptop use. How can I set the power saving/brightness specs for the external monitor, independently of the onboard one? I run Debian or Arch, under KDE.

Read the article

Multiple Graphics Cards on Fedora 15 (Gnome 3)

- by Michael

I have the (delightful) misfortune of having 3 graphics cards. They are XFX Radeon 5750s. Each drives 2 monitors via dvi. I am having a really hard time getting these running on fedora 15 (gnome 3). So my setup is 3 columns of 2 monitors (the upper monitor is mounted upside down in each column to reduce the bezel between monitors). When the (graphical) login screen comes up all 6 have the blue stripey background that must be the default, but then when I login, things get interesting. In the xorg.conf below, you will see only 2 of the screens in the serverlayout while the other 4 are commented out. Logging in with only 2 of the screens active works well (and it even remembers that the top one is upside down, and should be considered above the lower, i am not sure where it stores this info, but i set it using the graphical "Displays" settings) However, as soon as I uncomment a third screen, or more, it gives me an error message when I login. It's one of those friendly, less helpful messages (Oh no! Something has gone wrong. A problem has occurred and the system can't recover. Please log out and try again). If i do not use an xorg.conf, then the "Displays" prefs pane shows only the two monitors on one of my graphics cards Thanks to anyone who can help me get going! (xorg.conf and then lspci below, and xorg log) xorg.conf Section "ServerLayout" Identifier "X.org Configured" Screen "Screen0" 0 0 Screen "Screen1" Below "Screen0" # Screen "Screen2" RightOf "Screen0" # Screen "Screen3" RightOf "Screen1" # Screen "Screen4" RightOf "Screen3" # Screen "Screen5" RightOf "Screen4" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "catalogue:/etc/X11/fontpath.d" FontPath "built-ins" EndSection Section "Module" Load "record" Load "dri" Load "dbe" Load "extmod" Load "dri2" Load "glx" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor3" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor4" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor5" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" Identifier "Card0" Driver "radeon" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Card1" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "Card2" Driver "radeon" BusID "PCI:6:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card0" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card1" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Card1" Monitor "Monitor3" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen4" Device "Card2" Monitor "Monitor4" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen5" Device "Card2" Monitor "Monitor5" SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection lspci output follows [tgm@tgm ~]$ lspci 00:00.0 Host bridge: Intel Corporation 5520/5500/X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13) 00:03.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3 (rev 13) 00:07.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7 (rev 13) 00:14.0 PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers (rev 13) 00:14.1 PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers (rev 13) 00:14.2 PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers (rev 13) 00:14.3 PIC: Intel Corporation 5520/5500/X58 I/O Hub Throttle Registers (rev 13) 00:1a.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1c.1 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Port 2 00:1c.2 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 3 00:1d.0 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB Controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIR (ICH10R) LPC Interface Controller 00:1f.2 IDE interface: Intel Corporation 82801JI (ICH10 Family) 4 port SATA IDE Controller #1 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 00:1f.5 IDE interface: Intel Corporation 82801JI (ICH10 Family) 2 port SATA IDE Controller #2 02:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:00.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 03:02.0 PCI bridge: nVidia Corporation NF200 PCIe 2.0 switch for mainboards (rev a3) 04:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 04:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 05:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 05:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 06:00.0 VGA compatible controller: ATI Technologies Inc Juniper [Radeon HD 5750 Series] 06:00.1 Audio device: ATI Technologies Inc Juniper HDMI Audio [Radeon HD 5700 Series] 07:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) 08:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) xorg log (posted to fpaste due to how long it is. thanks to marcusw for the request) http://www.fpaste.org/r5ww/ xorg log with all 6 monitors enabled in xorg.conf (they all turn on and have blue, but then one gets the aforementioned user-friendly error message). http://www.fpaste.org/X63H/

Read the article

multiple servers porting to each other

- by JackLeo

hello, here is the details: theres is who "servers": VPS with ubuntu 10.10x32 and home pc, win7 on win7 apatche2.2 is running with webpage on VPS game server is running DNS forwards www subdomain to PC, and everything else to VPS (all via ip) I can not configure DNS directly, my providers do Wanted result: DNS forwards everything to VPS, VPS redirects *:80 to PC when viewing page stored in PC domain is shown normaly Questions: How to achieve that using as minimal resources as possible? Is it possible just tel my DNS provider to fix it that :80 port is in different ip? P.S. its for my friend, i do have some apatche and VDS configuration exp. More of a programmer i am. so trow everything you can ;)

Read the article

Multiple Routers, Failover, DHCP and multiple gateways. NOT WAN-failover

- by u_b

I've had a look around google and this forum but could not find an answer to my question. So probably one of you can help me a little. My intended setup is: Router R1: wan connection to isp. connected backup server. provides some wireless SSID. other connected devices like printer, laptop, etc. both wired and wireless. Router R2: no wan connection to isp but connected to R2. connects mp3-streamer and music server. also serves as a wireless access point with same SSID. other than described connections only wireless connections. I would like to be able to control music even if R1 is off, e.g. with no internet connection. On the other hand I would like to access internet also in the case that R2 is off, i.e. no music access. Last but not least I would like to stream internet radio, i.e., R1 and R2 are on, and music is streamed from internet to R1 to R2 to streamer. I would like to realize all this using DHCP (also using static assignments) so i do not have to configure statically on android, laptop, etc. So my questions are: Can I make DHCP provide a list of two default gateways R1,R2? In order to make clients fallback to other gateway if currently assigned gateway is turned off? Thanks in advance, u_b

Read the article

Can there be multiple monitors with these video cards and setup

- by z_Zelman

I have a Acer Aspire TimelineX 4830TG-6808 laptop running windows 7 Ultimate with one VGA port and one HDMI port. It has one Intel HD Graphics family card and one NVIDIA GeForce GT 540M. Right now I have one monitor running via the VGA port, and also the basic laptop monitor. When I look at the monitor setup, I see one unused video card available. Can I have another monitor via the HDMI port? If I cannot run three monitors, is there some way I could make a large "single" desktop that extends over two monitors? For the sake of celerity, maybe something like having a virtual machine window that extends over two monitors. Could this maybe come from third party software?

Read the article

VS2010 on multiple monitors

- by Carlos

I'm using VS2010, which has the cool feature of allowing you to drag panels out of the main IDE window. I like to drag some of the panels off to one of my other monitors. Unfortunately, after each run/debug session, VS2010 seems to forget where I had the panels, and dumps them right in the middle of the IDE window, and I have to move it again. Does anyone know what to do about this?

Read the article

Apache with multiple domains, single IP, VirtualHost is catching the wrong traffic

- by apuschak

I have a SOAP web service I am providing on a apache web server. There are 6 different clients (IPs) that request data and 3 of them are hitting the wrong domain. I am trying to find a way to log which domain name the requests are coming from. Details: ServerA is the primary ServerB is the backup domain1.com - the domain the web service is on domain2.com - a seperate domain that server seperate content on ServerB ServerA is standalone for now with its own IP and DNS from domain1.com. This works for everyone. ServerB is a backup for the web service, but it already hosts domain2.com. I added entries into the apache configuration file like: <VirtualHost *:443> ServerName domain2.com DocumentRoot /var/www/html/ CustomLog logs/access_log_domain2443 common ErrorLog logs/ssl_error_log_domain2443 LogLevel debug SSLEngine on ... etc SSL directives ... </VirtualHost> I have these for both 80 and 443 for domain1 and domain2 with domain1 being second. The problem is when we switch DNS for domain1 from ServerA to ServerB, 3 out of the 6 clients show up in the debug logs as hitting domain2.com instead of domain1.com and fail their web service request because domain2.com is first in the apache configuration file and catching all requests that don't match other virtualhosts, namely domain1.com. I don't know if they are hitting www.domain1.com, domain1.com (although I added entries for both) or using the external IP address or something else. Is there a way to see which URL they are hitting not just the page request or someother way to see why the first domain is catching traffic meant for the second listed domain? In the meantime, I've put domain1.com higher in the apache configuration than domain2.com. Now it catches the requests for all clients and works, however I don't know what it is catching and would like to make domain2.com the first entry again with a correct entry for domain1.com, for however they are hitting it. Thank you for your help! Andrew

Read the article

Windows 8: Multiple monitors with varying DPI? [closed]

- by Sid

Possible Duplicate: Dual monitors on Windows - How do I set a different DPI or text size on each monitor? I'm running Windows 8 on my Macbook Pro Retina (220dpi) which has an external 24" monitor (~96 dpi). In Mac OS 10.8.2, the display settings seem ok and I can actually use both displays without usability issues. I don't know what scaling settings etc it uses but it looks fine. On Windows 8, however when I boost the DPI settings to take advantage of the retina display, it blows up the display on the external monitor - text is giant sized. How can I tell Windows 8 to use the real DPI settings of each monitor? NOTE: I'm not asking for Windows 7.

Read the article

How to set up multiple video cards in Windows XP

- by Swish

All I am trying to do is run a three monitor setup, two widescreens on the good card at high res and a third smaller monitor at 1024x768 that I watch continuously updating info in. I have a Dell Vostro 200 with an HIS Radeon HD 4670 video card in the PCI-e slot. I need an additional video card that will work in an available PCI slot. I Had a Nvidia GeForce 5200 that was installed but due to what I'm assuming was a compatible driver issue (because it was Nvidia not ATI) it wouldn't run at more than 640x480 4bit color when installed simultaneously with the HIS card. Previously I used the Nvidia with the onboard Intel video to run a third monitor, but now that the HSI uses PCI-e the onboard has to be disabled. I tried a Radeon 9200 PCI card that I found (microsoft made I think) with it and only that or the HIS card could be enabled at the same time. When both were in the HIS card said "The device cannot start". SO, based on the fact that I got the Nvidia to work (although very poorly) with the new HIS Radeon HD 4670 PCI-e I know it's possible, just don't know what type of card I need to use. Any ideas?

Read the article

Good support to multiple desktops AND multiple monitors in Linux (Ubuntu)?

- by Somebody still uses you MS-DOS

I'm starting to have A LOT of opened windows in my machine. Sometimes within a project, I have e-mail/task management/personal e-mail/twitter, and a lot of different opened applications/terminal in my Linux environment. Nowadays I have 4 worspaces: Corporate management (e-mail) and corporate messenger; Work (Documents, Requisites) Dev (Development, All gVim windows, terminal and Firefox for development) Personal (Personal stuff: personal e-mail, delicious, twitter and so on) Sometimes it would be interesting to have different workspaces to projects instead of this configuration I have nowadays that are classes of work (bad name, I know, but I think you got the idea). I'm starting to think about using two monitors: one with Corporate Management, Work and Personal. The second monitor is only the development state: each workspace here is about a project being worked on instead of groups of works like before. A workspace may be implementing different classes for example. My question is: I just want to change to a second monitor using the mouse. I want to still be able to change workspaces in the same monitor using keyboard shortcuts. The keyboard shortcuts wouldn't change monitors, just worskpaces on the same monitor. Does Linux (Ubuntu 10.04 Lucid Lynx) support this envisioned setup? If so, how?

Read the article

Multiple Screen - Keyboard Sharing

- by nhbdesign

I run a small architectural firm with several drafters employed, I'm currently setting up a new office space and one of the things on top of my list is a figuring out a way to keep tabs on my drafters work and being able to collaborate in real time. Here's the challenge, they sit in a separate large cubicle room and I'm on the other end of the hallway, the way it is now; every time they’ve got some question on how to proceed on a certain design, they would come all the way to my office, I'd open their file (in read only) give some ideas, save-as new file, they go back copy paste... in short, nonsense. What I've been thinking of is to setup a hardwired solution that should enable me to have an extra monitor on my desktop which is hardwired (through KVM or something) to each of my employees workstations serving as a secondary display, so that I can watch live what they do, interact with them just as if they would have an extra keyboard and monitor in my office, except; I don’t want to have on my desk a separate monitor for each employee.. so I'd want them to be tiled on a single large screen, watching all screens alive, and whenever they ask me (or I just decide..) to step in, I just click on any tile and hurray, I'm in, editing and saving in real time on their workstation. I also want to reserve the option when I want to, to just use that monitor as just an extra screen for my workstation. Is something like that possible in 2013? P.S. I know of TeamViewer and similar internet/software based stuff, but I'm specifically looking for something solid hardwired and maintenance free, and also something that would allow to watch without my employees getting notified every time I do so (I’m not a tough boss though...).

Read the article

RDP with multiple monitors, display preferences get reset?

- by Martijn Kooij

Problem: When I connect to my pc at the office via RDP all the application windows I had previously carefully placed on either monitor 1 or 2 will be "scrambled". Either all applications show on monitor 1 and monitor 2 is empty, or they have switched 1 <- 2. Expected behaviour: When I connect I see all the application windows on exactly the same position and in the exact same size as I left them the night before. I have the exact same monitors at home as I have at work: Primary 2560x1440, Secondary 900x1440. Yesterday I tried switching the physical cables on the host machine hoping that the hardware order of the monitors was the difference. But this morning my secondary monitor was completely blank, not even the taskbar (which I had set to ONLY show on the secondary). Somewhere there must be something to help Windows understand which physical monitor is which virtual RDP monitor is which RDP "server" monitor... Are there more options than switching the cables? This one has been bothering me for a long long time now, I hope someone has a solution or workaround for me. Edit I want to use both monitors, so I have checked the "Use all monitors" setting in the RDP client. For example I leave my mail and total commander on the right monitor, and visual studio and Firefox on the left monitor. When I connect to RDP I want to see those applications on the same positions and sizes.

Read the article

Iis multiple domain binding

- by user2979484

I've a server with vshpere running and one vm with Windows 2008 r2. I'm hosting a website on this vm. But I want to try to add another domain. Now I have 3 ip-adresses. 1 for vspehere. 1 for vm. 1 for 2nd domain. When I add a new site and edit the bindings to the last ip-adress (2nd domain) it doesn't work. I've added also a new network adapter on vsphere and edited in the windows network adapter. Could anyone help me out with this. Sorry for my bad english I hope you will understand it.

Read the article

IIS6 host multiple websites under same sub-domain (or something similar)

- by Sigurbjörn

Hi there! I'm trying to figure out a structure for a hosted application that i'm working on. I've got a domain lets call it app.company.com (a sub-domain company.com of course) that is setup to redirect to my IIS 6 web server. I would like to set up one website in IIS for each client that will use this application. And have the URL schema be like this: app.company.com/clientA -- would point to ClientA website in IIS app.company.com/clientB -- would point to ClientB website in IIS Do you guys have any pointers or best practices for my scenario?

Read the article

Program for managing multiple monitors to keep from rearranging Windows

- by Rumel

I have a setup in use where I use up to four monitors. The problem is I generally switch around what I'm using and that messes up where all of my windows are. I'm on Windows 8 and have two graphics cards. My setup is as follows: Monitor 1: Card 1 Monitor 2: Card 1 Monitor 3: Card 2 TV 1: Card 2 I almost always have all the monitors turned on and in use. When I turn on the TV though, all of my windows get reconfigured and moved to different monitors. I don't know how to stop this. Another configuration I use is where I have Monitors 1 and 2 plus TV in use, and I have my Xbox in use on Monitor 3. When I get done with the Xbox and switch Monitor 3 over to the PC, everything is reconfigured. So is there a program out there that can help with this? I have the free version of Display Fusion in use but haven't seen settings to save monitor configurations.

Read the article

Multiple choice test GUI with serialization of Q&A

- by Bobby

I'm working on a project for school in Java programming. I need to design a GUI that will take in questions and answers and store them in a file. It should be able to contain an unlimited number of questions. We have covered binary I/O. How do I write the input they give to a file? How would I go about having them add multiple questions from this GUI? package multiplechoice; import java.awt.*; import javax.swing.*; public class MultipleChoice extends JFrame { public MultipleChoice() { /* * Setting Layout */ setLayout(new GridLayout(10,10)); /* * First Question */ add(new JLabel("What is the category of the question?: ")); JTextField category = new JTextField(); add(category); add(new JLabel("Please enter the question you wish to ask: ")); JTextField question = new JTextField(); add(question); add(new JLabel("Please enter the correct answer: ")); JTextField correctAnswer = new JTextField(); add(correctAnswer); add(new JLabel("Please enter a reccomended answer to display: ")); JTextField reccomendedAnswer = new JTextField(); add(reccomendedAnswer); add(new JLabel("Please enter a choice for multiple choice option " + "A")); JTextField A = new JTextField(); add(A); add(new JLabel("Please enter a choice for multiple choice option " + "B")); JTextField B = new JTextField(); add(B); add(new JLabel("Please enter a choice for multiple choice option " + "C")); JTextField C = new JTextField(); add(C); add(new JLabel("Please enter a choice for multiple choice option " + "D")); JTextField D = new JTextField(); add(D); add(new JButton("Compile Questions")); add(new JButton("Next Question")); } public static void main(String[] args) { /* * Creating JFrame to contain questions */ FinalProject frame = new FinalProject(); // FileOutputStream output = new FileOutputStream("Questions.dat"); JPanel panel = new JPanel(); // button.setLayout(); // frame.add(panel); panel.setSize(100,100); // button.setPreferredSize(new Dimension(100,100)); frame.setTitle("FinalProject"); frame.setSize(600, 400); frame.setLocationRelativeTo(null); // Center the frame frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE); frame.setVisible(true); } }

Read the article

select & print multiple value from dropdown list

- by sandy

hi , in this code how can selected multiple value from dropdown list <?php include ("connect.php"); $member_id = intval($_POST['sector_list']); if($member_id == 0) { // Default choice was selected } else { $res = mysql_query("SELECT * FROM members WHERE MemberID = $member_id LIMIT 1"); if(mysql_num_rows($res) == 0) { // Not a valid member } else { // The member is in the database } } ?> <form method="post" action=""> <input type="hidden" name="sector" value="sector_list"> <select name="sector_list" class="inputstandard" multiple="multiple"> <option value="0">send to</option> <?php $result = mysql_query('SELECT * from members') or die(mysql_error()); while ($row = mysql_fetch_assoc($result)) { echo '<option value="' . $row['MemberID'] . '">' . $row['MemberName']. '</option>'; } ?> </select> </form> assume the drop down list contain on (a,s,d,f,g,h,j,) users selects multiple value ( a,s,j) output = a,s,j not only j ???

Read the article

Why there is no multiple inheritance in Java, but implementing multiple interfaces is allowed

- by abson

Java doesn't allow multiple inheritance but it allows implementing multiple interfaces. Why?

Read the article

Is there an elegant way to track multiple domains under separate accounts with google analytics?

- by J_M_J

I have a situation where a content management system uses the same template for multiple websites with different domain names and I can't make a separate template for each. However, each website needs to be tracked with Google analytics. Would this be appropriate to track each domain like this by putting in some conditional code? And would this be robust enough not to break? Is there a more elegant way to do this? <script type="text/javascript"> var _gaq = _gaq || []; switch (location.hostname){ case 'www.aaa.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-1']); break; case 'www.bbb.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-2']); break; case 'www.ccc.com': _gaq.push(['_setAccount', 'UA-xxxxxxx-3']); break; } _gaq.push(['_trackPageview']); (function() { var ga = document.createElement('script'); ga.type = 'text/javascript'; ga.async = true; ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + '.google-analytics.com/ga.js'; (document.getElementsByTagName('head')[0] || document.getElementsByTagName('body')[0]).appendChild(ga); })(); </script> Just to be clear, each website is a separate domain name and must be tracked separately, NOT different domains with same pages on one analytics profile.

Read the article

Directing Multiple ccTLD's to 1 gTLD with a country specific subdirectory?

- by Pascal Van Opzeeland

We have multiple ccTLDomains and are thinking about how to best combine these into one. We want to do this to focus our link building efforts. We are running a website through which we offer a software-as-a-service. Therefore we could potentially sell to any country in the world. However, Germany is our most important market. We currently have a .com, .de, .nl. and .pl domain. All these domains have a high amount of unique content pages. What we are planning is to change everything to .com with language-based subdirectories, so .com/en/, .com/de/, etc. I have two questions concerning this issue: 1) How much of an advantage does a ccTLD have over a gTLD with country specific subdirectories in search rankings? So let’s say .de versus .com/de/? 2) How could we best redirect the visitors of our old ccTLD’s to our gTLD’s subdirectories? We would like to loose as few search engine rankings as possible. Thank you for your help.

Read the article

How to limit / throttle bandwidth with multiple connections

- by Led

I'm writing an app in C# that downloads concurrently (in different threads) using multiple connections to multiple servers, and I'd like to be able to limit the used bandwidth. For a single connection the solution would be simple; I'd use the solution posted here : http://www.codeproject.com/KB/IP/Bandwidth_throttling.aspx which calculates a sleep-time for the single connection. I'd like to know what the best way is to do this for multiple connections. Using the ThrottledStream posted above and dividing the bandwidth (say 2MB/sec) evenly among the connections isn't right, if I'd have 3 very slow connections and 1 very fast one they'd all be capped to 512kb/sec, so the fast one won't go above 512kb/sec and the other 3 wouldn't even make that. The preferred solution I think is to cap only the fastest connection(s) so the slower connections are used optimally. Does anyone have any experience with this, example code or any advice ?

Read the article

Storing multiple checkbox values in database

- by Madjokr

Hi, I want to store multiple column values in table.Lets take a example .. What are your favourite colors? the choices can be red,blue,green, orange. So lets assume, the user selects atleast 2 values. Is there any way to store the multiple values in table. I have implemented by concatinating choices of users in a column in the table. I later found that it is a bad practise. Currently i can think of using Bitwise operator and habtm. What are the different ways for storing multiple choices values in table? If I am implementing in rails, What is the best way to implement this with OOP concepts? Is there any builtin options in rails?

Read the article

mysql LAST_INSERT_ID() used with multiple records INSERT statement

- by bogdan

Hello, If i insert multiple records with a loop that executes a single record insert, the last insert id returned is, as expected, the last one... but if i do a multiple records insert statement: INSERT INTO people (name,age) VALUES('William',25),('Bart',15),('Mary',12); let's say the three above are the first records inserted in the table...after the insert statement i expected last insert id to return 3, but it returned 1...the first insert id for the statement in question... So can someone please confirm if this is the normal behavior of LAST_INSERT_ID() in the context of multiple records INSERT statements...so i can base my code on it thanks :)

Read the article

Alternatives to multiple inheritance for my architecture (NPCs in a Realtime Strategy game)?

- by Brettetete

Coding isn't that hard actually. The hard part is to write code that makes sense, is readable and understandable. So I want to get a better developer and create some solid architecture. So I want to do create an architecture for NPCs in a video-game. It is a Realtime Strategy game like Starcraft, Age of Empires, Command & Conquers, etc etc.. So I'll have different kinds of NPCs. A NPC can have one to many abilities (methods) of these: Build(), Farm() and Attack(). Examples: Worker can Build() and Farm() Warrior can Attack() Citizen can Build(), Farm() and Attack() Fisherman can Farm() and Attack() I hope everything is clear so far. So now I do have my NPC Types and their abilities. But lets come to the technical / programmatical aspect. What would be a good programmatic architecture for my different kinds of NPCs? Okay I could have a base class. Actually I think this is a good way to stick with the DRY principle. So I can have methods like WalkTo(x,y) in my base class since every NPC will be able to move. But now lets come to the real problem. Where do I implement my abilities? (remember: Build(), Farm() and Attack()) Since the abilities will consists of the same logic it would be annoying / break DRY principle to implement them for each NPC (Worker,Warrior, ..). Okay I could implement the abilities within the base class. This would require some kind of logic that verifies if a NPC can use ability X. IsBuilder, CanBuild, .. I think it is clear what I want to express. But I don't feel very well with this idea. This sounds like a bloated base class with too much functionality. I do use C# as programming language. So multiple inheritance isn't an opinion here. Means: Having extra base classes like Fisherman : Farmer, Attacker won't work.

Search Results

Search found 22526 results on 902 pages for 'multiple databases'.

Page 9/902 | < Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16 | Next Page >

- by oo

- by MariusMatutiae

- by Michael

- by JackLeo

- by u_b

- by z_Zelman

- by Carlos

- by apuschak

- by Sid

- by Swish

- by Somebody still uses you MS-DOS

- by nhbdesign

- by Martijn Kooij

- by user2979484

- by Sigurbjörn

- by Rumel

- by Bobby

- by sandy

- by abson

- by J_M_J

- by Pascal Van Opzeeland

- by Led

- by Madjokr

- by bogdan

- by Brettetete

< Previous Page | 5 6 7 8 9 10 11 12 13 14 15 16 | Next Page >