Search Results

Search found 255 results on 11 pages for 'reformat'.

Page 9/11 | < Previous Page | 5 6 7 8 9 10 11  | Next Page >

• Broken filesystem on Windows XP / 7 virtual machine

  - by Pekka

  I created a virtual machine with Windows XP as the guest system in Microsoft's Virtual PC that ships along with Windows 7. I then installed Virtualbox and began running the MS machine in it. It worked fine. Then, I accidentally started the machine in Microsoft's Virtual PC again. The screen stayed blank, so after a while, realizing my mistake, I closed the Machine. Since then, the VM won't start any more, claiming massive file system problems. Starting Windows in normal mode results in a SOMETHING_FILESYSTEM blue screen; I can start in protected mode and run a checkdisk. That will fix something on every run, but every time I restart, it will start again. I tried re-booting the VM with the Windows CD and doing a repair install. I didn't watch whether that worked out, but I'm caught in the reset / check disk / reset cycle again. Is there anything VM specific that can still be done? On a physical machine, I would say reformat. Is there any way to get hold of the data on the virtual machine through either Virtual PC or Virtualbox? It was an experimental machine, but I had started entering some data on it that would be nice to recover.

  Read the article

• Malware Defense Shows Up in PlayOn Settings/Logs Although System Has Been Thoroughly Cleaned

  - by nicorellius

  I was hit really hard by some nasty malware: Malware Defense. I was doing something I should not have been doing when I got it (surfing Pirate Bay for TV shows). It locked up my system and I had to reboot in safe mode. I was able to shut down the process and remove it using a malware killer tool. I then installed, after my machine was cleaned up a bit, Clamwin, Malwarebytes, and another AV tool. I cleaned the heck out of my system. Simultaneously, while this was going on, I was having trouble with my media-server, PlayOn. This tool is great, but has some bugs. One in particular is that it will not function well with AV software running. I found a way to allow the new AV software to run while using PlayOn, but it still says I have Malware Defense on. Firstly, Malware Defense is long gone. I cleaned all remnants from my registry and scoured my system with the above tools multiple times. PlayOn is getting some information that I have this crap installed on my system, but it's not. The system runs OK, but not optimally. I have a feeling it is causing my streaming to be interrupted sometimes. How is it that I can't even find Malware Defense on my system if I tried but yet somehow PlayOn is getting a finger print of it somewhere? I have gone back and forth with MediaMall to no avail. I kind of just gave up, because the streaming works OK. BTW, I also uninstalled/reinstalled PlayOn several times, reverted back to previous versions, etc. The only thing I haven't done is reformat my disk and reinstall Windows. I really don't want to do this if there is another way to remove this little print. Any ideas?

  Read the article

• Trouble cloning a Macbook Pro hard drive

  - by Mirko Froehlich

  I am trying to upgrade the 250GB hard drive in my MacBook Pro (early 2008 model) to a 750GB drive. I have connected the new drive via an external USB enclosure. The drive is recognized fine, I can format it, etc. However, every time I try to clone the drive, I am getting Input/Output errors. Before the clone operation, I have verified both the internal and the external drive using Disk Utility, and they both check out fine. After the clone operation, the external drive shows multiple "Invalid node structure" errors: I have tried two approaches for cloning the drive: Using Disk Utility, by starting from the OSX install DVD Using Carbon Copy Cloner The outcome is the same in both cases. The Carbon Copy Cloner logs show a handful of the following types of errors: rsync: mkstemp "<... an external filename ...>" failed: Input/output error (5) rsync: stat "<... an external filename ...>" failed: Input/output error (5) The actual files affected seem to be different across different runs of the application. Before the last run, I used Disk Utility to (once more) reformat the external drive and explicitly overwrite it with zeros, but this made no difference. I also tried running a surface scan in Tech Tool Pro overnight. It got about 2/3 of the way through before I had to disconnect the drive (had to take my MacBook Pro to work), but so far it didn't report any bad blocks. Assuming it scans the drive in the same order in which blocks would be allocated during actual use, it seems like if bad blocks were to blame for the clone failures, they should have been found already (given that the source drive is only 250GB). As a last attempt, I may try SuperDuper as well, although my understanding is that it uses the same underlying rsync approach as Carbon Copy Cloner, so it's unlikely to perform any better. Are there any other things I should try before I send the drive in for a replacement? Could these problems be caused by my internal drive, even though it works fine and checks out fine in Disk Utility?

  Read the article

• AGP 4x slot running at 2x

  - by Wesley

  Hi all, Here are the specs of the machine related to this question: AMD Athlon XP 2400+ @ 2 GHz / 2x 512MB PC3200 DDR RAM / 3D Fuzion 128MB GeForce 6200 AGP / WD 160GB IDE HDD / FIC AM37 (mobo) / Codegen 350W PSU / Windows XP Pro SP3 So, for some odd reason, the GeForce 6200 that is in the AGP 4x slot is not running at 4x, but 2x. The card itself supports AGP 4x and even 8x. When I enter the BIOS, the options for the AGP slot only allow 2x as the max. Before, the max option for the AGP slot in the BIOS was 4x. (I do get the 4x option after I reset CMOS, but it does not stick after a restart.) I don't exactly know what the problem could be, but a few weeks ago, this machine's hard drive was reformatted and got a fresh install of XP. Also, I did install Rivatuner, but I never overclocked it at all. (I uninstalled it after thinking that it had done something.) Otherwise, I cannot figure out the cause of the problem. Does anybody have an idea why this is happening? (Would I have to do another reformat?) Thanks in advance. PS: the other options for the AGP slot are aperture size (which I tried changing, but it did nothing) and FastWrite (enabled by default).

  Read the article

• Where is my problem? The P6X58D Premium Mobo, Windows 7, or other?

  - by Dylan Yaga

  I was having problems with my USB devices for an hour last night, and I am unable to determine the root cause of the problem. The two symptoms are: At seemingly random times (not consistently spaced by time or caused by any detectable event) my USB devices become "detached". Windows will play the USB disconnect sound and then the reconnect sound. The devices disconnected and then reconnected. My USB Keyboard will "stick" on one key for several seconds before processing any other keystroke made. The mouse also does not respond to clicks. I do not lose mouse movement or USB device connectivity. And after a moment of this several beeps will be emitted from the speakers. Hardware Specs: GFX Card: EVGA GeForce GTX 470 Superclocked 1280MB DDR5 PCIe Motherboard: ASUS P6X58D Premium Intel X58 Socket LGA1366 MB Processor: Intel Core i7-920 2.66Ghz 8M LGA1366 CPU Memory: Corsair Dominator 6144MB PC12800 DDR3 Storage: Hitachi 1TB Serial ATA HD 1600MHz 7200/32MB/SATA-3G Cooling: Corsair Hydro H50 CPU Liquid Cooler Case: Corsair Obsidian 800D Full Tower Case Power Supply: Corsair HX1000W 1000W Modular Power Supply Steps I have taken to narrow down the problem: Restarted the computer. - No change Changed USB port the Hub was connected to on the CPU. - No change Removed all devices from USB Hub and connected directly to CPU. - No change Used a different USB keyboard both in USB Hub and directly to CPU. - No change Disconnected and reconnected all cables. - No change Disassembled the Tower and determined if the USB headers were firmly connected. - No change Checked device manager for errors. Checked all USB devices. - Nothing flagged After an hour of frustration trying to narrow down the problem it appeared to disappear. But I am torn between it being a Mobo problem or an OS problem. Is there anything else I can do to narrow down the problem before a reformat and then eventually exchanging the Mobo?

  Read the article

• How can I format an SD card with a more robust Linux-usable filesystem with a specific cluster size for better write performace?

  - by Harvey

  Goal: microSD card formatted... for best write performance for use only with embedded Linux for better reliability (random power failures may occur) using an 64kB cluster size I'm using an 8GB microSD card for data storage inside an embedded Linux/ARM device. The SD card is not removable. I've been using ext3 instead of the pre-installed FAT32 because it seems to better handle random power failures during writes. However, I kept noticing that my write performance is always best with the pre-installed FAT32 from Kingston. If I reformat the card with FAT32, the performance still suffers. After browsing wikipedia, I stumbled upon the following comment saying that some cards are optimized for specific cluster sizes. In my case, the Kingston comes pre-formatted for an 64kB cluster size. Risks of reformatting Reformatting an SD card with a different file system, or even with the same one, may make the card slower, or shorten its lifespan. Some cards use wear leveling, in which frequently modified blocks are mapped to different portions of memory at different times, and some wear-leveling algorithms are designed for the access patterns typical of the file allocation table on a FAT16 or FAT32 device.[60] In addition, the preformatted file system may use a cluster size that matches the erase region of the physical memory on the card; reformatting may change the cluster size and make writes less efficient.

  Read the article

• How to reinstall Windows 7 Embedded?

  - by Joshua Lim

  I need to reinstall Windows 7 Embedded on my server but I'm not able to do so despite repeated tries. I tried booting up the server with the Windows Embedded 7 Setup ISO attached (using IPMI) and I've also tried running setup.exe in the CDROM after Windows has booted up. Both methods fail. In the first case, the server simply reboots by itself after I selected "IBW" button. In the second case, the installer returns some files missing while installing. I'm sure my Windows Embedded 7 Setup ISO is correct, because earlier on, I used IBW on the same ISO to install Windows Embedded 7 onto the server. Of course, the C drive has empty when I first installed. What should I do? I read that the normal Windows 7 (not embedded version) installer allows you to reformat the C drive before re installing. There does not appear to be such an option for Windows embedded. Appreciate any tip. Thanks.

  Read the article

• 5.1 Surround Channels are Jumbled

  - by stickynips

  I had this exact setup working previously, but after a reformat it went screwy on me. I have an Onkyo A/V Receiver hooked up to my PC, via optical S/PDIF. Attached to the receiver is a 5.1 speaker setup (tested and working fine with my Xbox via the receiver). It seems to me that the audio channels are getting mixed up somehow between the PC and the receiver. I have a 5.1 test file which plays a sounds through each speaker individually. The channels are mixed as such: "Left Front" plays through my Right Front speaker "Center" plays through my Left Front speaker "Right Front" plays through my Center speaker "Left Rear" plays through my Subwoofer "Right Rear" plays through my Left Rear speaker I've tried downloading the latest Realtek HD Audio Drivers and the Realtek HD Audio Manager, but neither makes any difference. If there's a way I can manually rearrange the channels I believe it would fix the problem, but as far as I know this is impossible. edit: Sorry, I've forgotten some basic info. I'm running Windows 7 x64. The sound card is Realtek ALC892 embedded in a GIGABYTE GA-890GPA-UD3H AM3 motherboard.

  Read the article

• How do I repartition an SDHC card in Windows?

  - by Peter Mortensen

  How do I repartition an SDHC card (4 GB or more)? Do I need third-part tools or Linux (a live CD solution would be OK)? In Windows' Disk Management the option Delete Partition is dimmed out: I can reformat the card as FAT32, copy files to and from the card and even change the file system to NTFS using the command line command CONVERT, but not repartition it. The article How to Partition an SD Card in Windows XP talks about using "a Windows enabler program" which sound rather dubious to me. I have tried to change from “Optimize for quick removal” to “Optimize for performance”. The option to format as NTFS appeared, but the Delete Partition option is still dimmed out. Platform: Windows XP 64-bit SD card reader: USB 2.0 device, LogiLink® CR0005C Cardreader 3,5' USB 2.0 intern 54-in-1 mit USB Front Kingston 16 GB SDHC card, speed class 4. (It could be formatted as FAT32 and successfully used in a 4 GB ReadyBoost setup (Windows 7).) I have also tried on different versions of Windows and with different cards with the same result: Kingston 4 GB SDHC card, speed class 4 (the one shown in the screenshot) Transcend 2 GB (not marked as SDHC, but SD) Windows 7 32-bit (albeit with a somewhat an older card reader) and Windows XP 32-bit on an EliteBook 8730w

  Read the article

• Windows 7 Paging file apparently not being used

  - by Daniel F.

  I'm running Windows 7 Home Premium 32bit on a mobo with 24GB RAM. Of those 24GB, 20GB are assigned as a RAMDISK via ASRock XFastRAM. This RAMDISK has the drive letter X assigned to it. On X:\ I'm storing the temporary files folder, as well as pagefile.sys. Pagefile.sys has 6GB of size. The X:\ has usually around 14GB free space, so the temporary files are negligible, it's mostly the browsers which are storing their caches on there. Now my issue is that Firefox is crashing a lot on me, no error message pops up, but I know that this is because it's out of memory. I could kind of live with that, but now that I switched from using Eclipse to Android Studio, I know that I'm in trouble, because Java isn't capable of allocating, and Android Studio, together with the Java instances it launches, is quite a memory hog. So I tried to figure out what's wrong, and apparently Windows isn't swapping out memory onto the paging file. While my applications are crashing (firefox) / not starting (java vm's), the paging file is only using constantly around 15% of its size (checked with the performance monitor). 15% equals to 1GB aprox. I know that the correct solution would be to switch to 64 bit Windows, but I had to use the 32 bit version because of driver issues which I had about two years ago, and I guess that I'll have them again if I reformat and install the 64 bit version. Also, the machine is running quite stable, the only issue is the memory, so I'd like to use it as it is (as the apps are installed and configured) Is there a way to make Windows use the paging file more efficiently? None of my processes require more than 1GB, I'd just like it to swap out some seldomly used stuff, like GoogleCrashHandler.exe and stuff like that in order to have "more physical memory avaliable". Is that possible?

  Read the article

• Triple-Boot + 4 partition Limit

  - by dsimcha

  I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine. Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mix, too. I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive. This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it. Here are the options I've considered and why I don't like them: Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all. Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle. Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless. Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc. Can anyone suggest any other possibilities that I may have overlooked?

  Read the article

• Seagate 3TB hard drive loses format information

  - by Victor Bugarin

  I have a Windows 7x64 Ultimate, 6 GB memory, 1 TB HD. 3TB Barracuda XT HDD. The HDD is installed on a StarTech 4 bays external enclosure I had troubles so I converted to a GPT, created 1 partition and formatted as NTFS. The hard drive I can write and read to and from the hard drive but it will become unreadable at some point while I am copying files or after I have copied files to it. I have copied large Bluray movies and diverse video files, I have also copied 32 GB of pictures, and I have copied about 86 thousand music files in different formats. At some point the partition becomes unreadable and I have to format the partition again (all files lost) and I have to start the whole process again. At some point I have been unable to copy large ISO (Bluray movies) file images. I have partitioned the HDD in 2 partitions P1 - 2TB, P2 - 1TB and I have lost every single file in either partition the same way. I reformat the HDD and it seems fine. I have run seatools to check the hard drive and it reports to be OK. What gives?

  Read the article

• Last step in HDD Recovery (fixing windows)

  - by Atom Computing

  My dad’s hard drive corrupted which was a result of many bad sectors. Anyway, I made a clone of the drive and have now repaired it totally (recreating the MBR and MFT) and doing a series of ChkDsk's on it. I can now see all the files and folder on it and it is all intact. I currently have it as a slave in my computer (where I was doing all the repairs). When putting it back into the computer, it comes up with "A disk read error occurred: Press Ctrl + Alt + Del to Restart". I don’t know why this is happening but think it might have something to do with file permissions. I have tried a start-up recovery on the Vista boot CD and it found no problems. When trying to apply file permissions (and creating file perms for the SYSTEM group (as it didn’t have any for SYSTEM group)) it couldn't apply them for some of the System32 folder files. I have tried applying them as admin and with as powerful privileges I can get. All to no avail. When it is in my PC I can boot it up (I added it into my bootloader) and it boots up fine except when it logs in it comes up with the error - "Rundll32.exe - Windows cannot access the specified device, path or file. You may not have the appropriate permissions to access the item" This message keeps coming back and nothing loads at all. Any help would be greatly received as I have got so far with the data recovery and want to avoid a reformat at all costs due to the vast number of programs installed and I don’t have much time on my hands! Thanks

  Read the article

• Multi-partition USB stick

  - by nightcracker

  In my freelance job as "the dude that fixes your computer" I have an extremely handy tool, a bootable USB stick with Ubuntu LiveCD that allows me to recover and investigate in a known, working environment. Now, I want to reformat this USB stick and reinstall with Casper-RW persistance. I did this a few times before with a FAT-formatted USB stick. It was a horror. The USB drive corrupted constantly, by people accidently removing the USB stick, the computer not properly shutting down, ETC. Now what I want to create a multi-partition USB stick so I can put Ubuntu on a ext partition, but still be able to store some Windows stuff in it, by having a secondary FAT partition. However I read somewhere that Windows will only check the first partition on USB sticks, giving a problem with the first bootable linux partition. Is this possible on some way? EDIT Perhaps it wasn't clear what the problem is. The problem is that I read somewhere that Windows will only recognize the first partition on a USB stick. But I want two partitions, a ext partition and a FAT partition. No issues so far, but in order to be bootable the ext partition must be the first one!

  Read the article

• Is my "Generic" USB Flash Drive broken?

  - by Jesse J.

  So here is the situation. I find myself technological knowledgeable about many things ( I love to code, whether it's websites, C#, C++ or so on). However: My 2 toddlers (my wife actually) bought me a "Generic" 128 GB USB Storage Device (Usb Flash Drive) for Father's Day. I thought awesome at first..... WRONG! Nothing but problems with it. 3-4mb/s MAX transfer speed. I can bear with it. BUT! When I went to reformat my computer I transferred my save files from my games over to the stick and then the USB Stick managed to become corrupted. Not just a simple format would work either. It's screwed. I tried to use (Manually changed usb drive letter troubleshooting it to X) "chmod X: /X /F /R" with administrator rights, I did this after a long session to make it work with no errors (had to delete the log) and I finally recovered the files, however when I go to use it (transfer to or from) it transfers a couple kb to the stick or from it and then freezes, It says (Windows 7): Name: From: Folder (X:\File\Location) To: Folder C:\Users\Username\Desktop) Items Remaining: 0 (0 bytes) Speed: 0 bytes/second It does this forever... and ever... and ever... It transfered 3 files atleast, and then stopped. This is a new USB Stick bought from a "High" reputation company on eBay. Is the USB Stick screwed?

  Read the article

• Looking for a smart sync tool that exactly copies the structure of the source to that of the destination

  - by ????????

  I am a Windows 7 user and looking for a sync tool that exactly copies the structure of the source to that of the destination. The scenario is as follows: I have a laptop in which I save my daily projects. I always bring this laptop wherever I go to work, either at my school or at my house. At school I have a room in which I put an external hard drive to backup my laptop data. Upon arriving at school I always sync the external data with my laptop. Before leaving the school, I also do the synchronization if I make some modification in my laptop data. I do the same thing when I arrive and leave my house. Every month I reformat my laptop because of some trial softwares. I am using SyncToy 2.1 to sync the external drives with my laptop. The problem is as follows. Before formatting my laptop, I sync all external drives with my laptop. For example, My laptop structure: c:\data\file1.ext c:\data\folder1\file2.ext Both external drive structure: d:\data\file1.ext d:\data\folder1\file2.ext After reformatting my laptop, I move the file1.ext to folder1. So my laptop structure becomes, c:\data\folder1\file1.ext c:\data\folder1\file2.ext If I sync external drives with my laptop, I get d:\data\file1.ext d:\data\folder1\file1.ext d:\data\folder1\file2.ext I want the tool also remove d:\data\file1.ext. How to do this?

  Read the article

• How to make a redundant desktop system with daily snapshots? (Is btrfs ready for use?)

  - by TestUser16418

  I want to configure a desktop system in which the home filesystem would be redundant (e.g. RAID-1), and would have weekly snapshots taken. I've already done this with ZFS, the snapshot system is wonderful, and with send/recv you can easily create backups on external media. Unfortunately, at that point, I want GNU+Linux and not FreeBSD or Solaris, so I'm looking for suggestions for good alternatives. I reckon that my alternatives are: btrfs - it seems to be exactly what I need, it has snapshots and commands that allow you to easily replicate zfs send. Yet all documentation mentions that it's still experimental. I can't seem to find any actual reports on its reliability or usability issues. Can you point me to any information on that issue that could clarify whether it would be a possible choice? I have a large preference for this option, mostly because I don't want to reformat the drives when btrfs becomes ready, but I there's no information on whether it's usable at all, whether it's a silly idea to use it, etc. The question that I cannot get the answer to is what does "experimental" mean. lvm snapshots and ext4 - preferably not, since it can consume an awful amount of space when new files are created. Creating 200 GB files requres 200 GB free space and 200 GB additionally for snapshots. I also have found it unreliable -- failed metadata rewrite results in an unreadable PV. I'm wondering how btrfs would compare here. A single filesystem (ext4) on a RAID-1 array with custom COW snapshots with hardlinks (like cp -al). That's my current preference if I can't use btrfs. So how experimental btrfs is, which should I choose, and do I have any other options? What if I don't keep external incremental backups, would that affect my choice?

  Read the article

• computer randomly restarting. both in game and out of game

  - by eric

  first my specs are. AMD Phenom II x4 955 processor 3.2ghz 20gb ddr3 ram 4Gb Nvidia Geforce GTX 770 850w Corsair tx850w psu Gigabyte ud3 mobo Windows 7 professional I recently uprgraded my vid card to gtx770 and upgraded my psu to the 850w thats in it now. i did a reformat with the installation of the new gpu and psu and started fresh and only have a couple programs installed (diablo3, nvidia control panel, wow, and steam). all drivers are up to date and everything is hooked up correctly. the problem is it will randomly shut down. no blue screen. just turns itself straight off and reboots after a couple seconds. occasionally i will have to unplug the power cable from the psu for a few minutes then reconnect and it will start up. it seems pretty random. sometimes it does it when my pc is just sitting there on the home screen. and sometimes it does it during games. and sometimes it doesnt do it for days at a time. i noticed the psu felt hot so i put an extra fan blowing straight onto both the psu and gpu and neither feel overly hot after it shuts down now. could it just be that it is a psu problem. the psu was taken from another machine but wasnt having this problem in that machine. i have seen a few articles online about gtx770 doing the same thing. but i havent found any answers or solutions. any help will be appreciated. im sure the 850w is enough to power my machine, im just stumped and ran out of ideas to fix it. i have even returned the video card for another thinking it might have been an issue with that particular card, but still gettin the same problem.

  Read the article

• Is it safe to format this partition?

  - by xanesis4

  On a ubuntu server I own, I am running out of space. When I ran sudo parted /dev/sda -l to find all available drives, I got this: Model: ATA ST31000528AS (scsi) Disk /dev/sda: 1000GB Sector size (logical/physical): 512B/512B Partition Table: msdos Number Start End Size Type File system Flags 1 1049kB 256MB 255MB primary ext2 boot 2 257MB 1000GB 1000GB extended 5 257MB 1000GB 1000GB logical lvm Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/server--vg-swap_1: 2135MB Sector size (logical/physical): 512B/512B Partition Table: loop Number Start End Size File system Flags 1 0.00B 2135MB 2135MB linux-swap(v1) Model: Linux device-mapper (linear) (dm) Disk /dev/mapper/server--vg-root: 998GB Sector size (logical/physical): 512B/512B Partition Table: loop Number Start End Size File system Flags 1 0.00B 998GB 998GB ext4 I understand /dev/mapper/server--vg-root is the filesystem, and /dev/sda1 has some stuff related to GRUB. But, what about /dev/sda2 and /dev/sda5? When I tried to mount /dev/sda2, it said that I needed to specify the file system, which according to the table, is nonexistent. So, is it safe to format this with, say ext4 and mount it? Also, when I tried to mount /dev/sd5, it gave me this error: mount: unknown filesystem type 'LVM2_member' I assume it is NOT save to reformat this. If I'm wrong, then that would be great, because I could save some space. Please let me know either way. Thanks in advance! UPDATE: Here is the result of mount: /dev/mapper/server--vg-root on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /boot type ext2 (rw,acl) /dev/sda1 on /media/hd2 type ext2 (rw)

  Read the article

• Is it possible (and how if it is) dump two concatenaded disks in a new disk using DD?

  - by pedromarce

  Hi, I have a Lacie enclosure that has a setup with 2 500gb disks configured as 1 drive of 1TB, the only partition created for the whole drive is HFS+ journaled, but the controller in the enclosure is gone and so the drive refuses to mount anymore. I have been able to remove those two disks from the enclosure and connect them using USB ports and a program called R-studio (Raid recovery program) check that the setup the controller in the enclosure was using was both disks concatenated (Not Striped). And so configuring that option in R-studio I could be able to get back all the information. But before I got a license for r-studio for just one use, I would rather buying a new 1TB disk and try to write all the information of those two disks in this new one. I can use Mac or linux machines to do it, and I think it should be ok use DD command in linux to concatenate those two drives into the new one in the right order to get it working again in the new disk and I will reformat the old ones, but I am not sure. So, is it possible in this scenario to write both disks into a new one using DD? Any hints how the command would look? Thanks,

  Read the article

• Adding SSD as boot drive to existing system

  - by thegrinner

  I recently bought two 128GB SSDs that I'm planning on adding (RAID 0) to a system I currently have on a 1TB HDD. I'm hoping to redo the disk space such that the SSDs act as the boot drive (only other items would be things I install there explicitly) while the majority of my system is on the HDD - documents, media, program files. Something like this: SSD = [ OS | Explicitly placed programs] HDD = [ Program Files | Media | Documents | etc] I have an external drive capable of holding all the data I want to save, so the backup isn't too much of a concern. What I'm worried about is how I should go about doing this - do I need to do a clean install on the SSDs, reformat the HDD, move things like Program Files/Users to the HDD, and then restore data (not full programs but things like saves)? Should I be using one of the regedit hacks I've seen around to change the default install directories instead of moving program files and users? Should I have the actual folders on the HDD and symlinks on the SSD? Or is there a better solution? Do I need to disconnect my HDD while doing the clean Windows install?

  Read the article

• Open source Java CMS for Google App Engine?

  - by markvgti

  I am looking for an open source Java CMS (Web CMS, actually) to run on Google App Engine. I have looked at related older questions on this topic (What CMS runs on Google AppEngine?, CMS over Google App Engine, with SEO etc.) but the problem is that they all largely list Python-based CMSes. Plus these questions are pretty old, and since GAE is a fast-moving target, I thought it might be worthwhile to ask again. I want a CMS for creating some websites (for myself and for others), but would rather not start writing one from scratch. A "good" (very subjective, I know) open source WCMS allows me to start using a product, while still being able to add to/extend the product/project. On the one hand I am looking for a somewhat mature product/project, on the other hand it's easier to start contributing to the development cycle of a young product/project (conflicting, I know :-). Here are some features that would be preferable: [X]HTML/XML/CSS based templating Ability to create multiple blogs Galleries Ability to create a "Downloads" section (is this pretty much standard?) Separate management for digital assets (images, PDFs, binary files etc.) Roles like "Administrator", "Editor", "Contributor" etc. (or their equivalents) Ability to move/reorganize pages Export to PDF Reformat content for printing Is the CMS you are about to suggest especially well-suited to publishing an online book? My idea is that while the book may be offered as a downloadable eBook, the latest, most current version will be the one available on the website.

  Read the article

• BackgroundWorker From ASP.Net Application

  - by Kevin

  We have an ASP.Net application that provides administrators to work with and perform operations on large sets of records. For example, we have a "Polish Data" task that an administrator can perform to clean up data for a record (e.g. reformat phone numbers, social security numbers, etc.) When performed on a small number of records, the task completes relatively quickly. However, when a user performs the task on a larger set of records, the task may take several minutes or longer to complete. So, we want to implement these kinds of tasks using some kind of asynchronous pattern. For example, we want to be able to launch the task, and then use AJAX polling to provide a progress bar and status information. I have been looking into using the BackgroundWorker class, but I have read some things online that make me pause. I would love to get some additional advice on this. For example, I understand that the BackgroundWorker will actually use the thread pool from the current application. In my case, the application is an ASP.Net web site. I have read that this can be a problem because when the application recycles, the background workers will be terminated. Some of the jobs I mentioned above may take 3 minutes, but others may take a few hours. Also, we may have several hundred administrators all performing similar operations during the day. Will the ASP.Net application thread pool be able to handle all of these background jobs efficiently while still performing it's normal request processing? So, I am trying to determine if using the BackgroundWorker class and approach is right for our needs. Should I be looking at an alternative approach? Thanks and sorry for such a long post! Kevin

  Read the article

• remove text in parentheses and the parentheses using .filter() or .slice()

  - by liz

  i have a table with code like this: <tr> <th scope="row">5-17</th> <td>23.6 (22.0-24.0)</td> <td>18.0 (17-20.0)</td> </tr> <tr> <th scope="row">Total 0-17</th> <td>20.6 (8-15.6)</td> <td>16.1 (22.2-24.0)</td> </tr> i am using the following function to find the contents of the table cells and bring it into an array: var l1 = $('#datatable td:nth-child(2)').map(function() { return $(this).text(); }).get(); the table fragment's id is "datatable". this returns properly, however i am putting this array into jqPlot and it cant read the stuff between the parentheses or the parentheses themselves. i need the data to remain in the table however because we are displaying both the table and the chart. i cant reformat (add spans around the content i want to remove etc) because these tables are being generated by another piece of software. i think what i need to do is either slice off after the space or use a regex to find and remove. not sure how to proceed with either of these. thanks!

  Read the article

• IE bug with TD's tables and whitespace?

  - by mark smith

  Hi there, I have a page that is using tables, in FF etc it works perfect, but in IE7 it causes issues, its basically where the four corners have a td and and img (its a rounded corner form) .. if i remove the whitespace from the document it fixes the issue.. What actually happens is that it messes up the tables.. it puts a thin white line between the upper tr that holds the 2 corners and the next tr I need to remove the the whitespace between the img and the TD, is there a better work around, as i have lots and not only that if i reformat the document the problem returns.. here is a simple example.. <table width="100%" height="418" border="0" cellpadding="0" cellspacing="0" bgcolor="#F04A23" style="margin: 0px; padding: 0px"> <tr> <td width="12" align="left" valign="top"> <img src="content/images/corner_left.gif" width="12" height="12" /> </td> as you can see there is white space between img and td... and i remove it so it looks like this <img src="content/images/corner_left.gif" width="12" height="12" /></td> the problem is gone, (notice the td and image are right next to each other) Any ideas, i tried setting all sorts of css, padding 0px, margins 0px etc ... Any ideas really appreciated

  Read the article

< Previous Page | 5 6 7 8 9 10 11  | Next Page >