Search Results

Search found 218 results on 9 pages for 'sy'.

Page 9/9 | < Previous Page | 5 6 7 8 9 

• Why is my mdadm raid-1 recovery so slow?

  - by dimmer

  On a system I'm running Ubuntu 10.04. My raid-1 restore started out fast but quickly became ridiculously slow (at this rate the restore will take 150 days!): dimmer@paimon:~$ cat /proc/mdstat Personalities : [linear] [multipath] [raid0] [raid1] [raid6] [raid5] [raid4] [raid10] md0 : active raid1 sdc1[2] sdb1[1] 1953513408 blocks [2/1] [_U] [====>................] recovery = 24.4% (477497344/1953513408) finish=217368.0min speed=113K/sec unused devices: <none> Eventhough I have set the kernel variables to reasonably quick values: dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_min 1000000 dimmer@paimon:~$ cat /proc/sys/dev/raid/speed_limit_max 100000000 I am using 2 2.0TB Western Digital Hard Disks, WDC WD20EARS-00M and WDC WD20EARS-00J. I believe they have been partitioned such that their sectors are aligned. dimmer@paimon:/sys$ sudo parted /dev/sdb GNU Parted 2.2 Using /dev/sdb Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00M (scsi) Disk /dev/sdb: 2000GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 (parted) unit s (parted) p Number Start End Size File system Name Flags 1 2048s 3907028991s 3907026944s ext4 (parted) q dimmer@paimon:/sys$ sudo parted /dev/sdc GNU Parted 2.2 Using /dev/sdc Welcome to GNU Parted! Type 'help' to view a list of commands. (parted) p Model: ATA WDC WD20EARS-00J (scsi) Disk /dev/sdc: 2000GB Sector size (logical/physical): 512B/4096B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 2000GB 2000GB ext4 I am beginning to think that I have a hardware problem, otherwise I can't imagine why the mdadm restore should be so slow. I have done a benchmark on /dev/sdc using Ubuntu's disk utility GUI app, and the results looked normal so I know that sdc has the capability to write faster than this. I also had the same problem on a similar WD drive that I RMAd because of bad sectors. I suppose it's possible they sent me a replacement with bad sectors too, although there are no SMART values showing them yet. Any ideas? Thanks. As requested, output of top sorted by cpu usage (notice there is ~0 cpu usage). iowait is also zero which seems strange: top - 11:35:13 up 2 days, 9:40, 3 users, load average: 2.87, 2.58, 2.30 Tasks: 142 total, 1 running, 141 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.2%sy, 0.0%ni, 99.8%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3096304k total, 1482164k used, 1614140k free, 617672k buffers Swap: 1526132k total, 0k used, 1526132k free, 535416k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 45 root 20 0 0 0 0 S 0 0.0 2:17.02 scsi_eh_0 1 root 20 0 2808 1752 1204 S 0 0.1 0:00.46 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.17 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.02 migration/1 ... dmesg errors, definitely looking like hardware: [202884.000157] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [202884.007015] ata5.00: failed command: FLUSH CACHE EXT [202884.013728] ata5.00: cmd ea/00:00:00:00:00/00:00:00:00:00/a0 tag 0 [202884.013730] res 40/00:00:ff:59:2e/00:00:35:00:00/e0 Emask 0x4 (timeout) [202884.033667] ata5.00: status: { DRDY } [202884.040329] ata5: hard resetting link [202889.400050] ata5: link is slow to respond, please be patient (ready=0) [202894.048087] ata5: COMRESET failed (errno=-16) [202894.054663] ata5: hard resetting link [202899.412049] ata5: link is slow to respond, please be patient (ready=0) [202904.060107] ata5: COMRESET failed (errno=-16) [202904.066646] ata5: hard resetting link [202905.840056] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [202905.849178] ata5.00: configured for UDMA/133 [202905.849188] ata5: EH complete [203899.000292] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [203899.007096] ata5.00: failed command: IDENTIFY DEVICE [203899.013841] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [203899.013843] res 40/00:00:ff:f9:f6/00:00:38:00:00/e0 Emask 0x4 (timeout) [203899.041232] ata5.00: status: { DRDY } [203899.048133] ata5: hard resetting link [203899.816134] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [203899.826062] ata5.00: configured for UDMA/133 [203899.826079] ata5: EH complete [204375.000200] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204375.007421] ata5.00: failed command: IDENTIFY DEVICE [204375.014799] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204375.014800] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204375.044374] ata5.00: status: { DRDY } [204375.051842] ata5: hard resetting link [204380.408049] ata5: link is slow to respond, please be patient (ready=0) [204384.440076] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204384.449938] ata5.00: configured for UDMA/133 [204384.449955] ata5: EH complete [204395.988135] ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen [204395.988140] ata5.00: failed command: IDENTIFY DEVICE [204395.988147] ata5.00: cmd ec/00:01:00:00:00/00:00:00:00:00/00 tag 0 pio 512 in [204395.988149] res 40/00:00:ff:0c:0f/00:00:39:00:00/e0 Emask 0x4 (timeout) [204395.988151] ata5.00: status: { DRDY } [204395.988156] ata5: hard resetting link [204399.320075] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [204399.330487] ata5.00: configured for UDMA/133 [204399.330503] ata5: EH complete

  Read the article

• becomeFirstResponder not working!!!

  - by vikinara

  In the below code becomeFirstResonder not working, only resignFirstresponder working...can anyone please help - (BOOL)textFieldShouldReturn:(UITextField *)textField { if (textField == txtDate) { [txtDate resignFirstResponder]; [txtTime becomeFirstResponder]; } if (textField == txtTime) { [txtTime resignFirstResponder]; [txtAddress becomeFirstResponder]; } if (textField == txtAddress) { [txtAddress resignFirstResponder]; [txtCity becomeFirstResponder]; } if (textField == txtCity) { [txtCity resignFirstResponder]; [txtState becomeFirstResponder]; } if(textField == txtState) { [txtState resignFirstResponder]; [txtZip becomeFirstResponder]; } if (textField == txtZip) { [txtZip resignFirstResponder]; } return NO; } - (BOOL)textFieldShouldEndEditing:(UITextField *)textField { if(textField == txtDate) { NSString *dateString = txtDate.text; NSString *dateRegex = @"^(1[0-2]|0[1-9])/(3[01]|[12][0-9]|0[1-9])/[0-9]{4}$"; NSPredicate *dateTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", dateRegex]; BOOL validateDate = [dateTest evaluateWithObject:dateString]; if(!validateDate){ UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Date Error." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtDate.text = nil; } } if(textField == txtTime) { NSString *timeString = txtTime.text; NSString *timeRegex = @"^(([0]?[0-5][0-9]|[0-9]):([0-5][0-9]))$"; NSPredicate *timeTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", timeRegex]; BOOL validateTime = [timeTest evaluateWithObject:timeString]; if(!validateTime) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect Time Entry." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtTime.text = nil; } } if(textField == txtAddress) { NSString *addressString = txtAddress.text; NSString *addressRegex = @"^[a-z0-9 ]+$"; NSPredicate *addressTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", addressRegex]; BOOL validateAddress = [addressTest evaluateWithObject:addressString]; if(!validateAddress) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect State." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtAddress.text = nil; } } if(textField == txtState) { NSString *stateString = txtState.text; NSString *stateRegex = @"^(?-i:A[LKSZRAEP]|C[AOT]|D[EC]|F[LM]|G[AU]|HI|I[ADLN]|K[SY]|LA|M[ADEHINOPST]|N[CDEHJMVY]|O[HKR]|P[ARW]|RI|S[CD]|T[NX]|UT|V[AIT]|W[AIVY])$"; NSPredicate *stateTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", stateRegex]; BOOL validateState = [stateTest evaluateWithObject:stateString]; if(!validateState) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect State." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtState.text = nil; } } if(textField == txtCity) { NSString *cityString = txtCity.text; NSString *cityRegex = @"^[a-z ]+$"; NSPredicate *cityTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", cityRegex]; BOOL validateCity = [cityTest evaluateWithObject:cityString]; if(!validateCity) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect City." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtCity.text = nil; } } if(textField == txtZip) { NSString *zipString = txtZip.text; NSString *zipRegex = @"^[0-9]{5}([- /]?[0-9]{4})?$"; NSPredicate *zipTest = [NSPredicate predicateWithFormat:@"SELF MATCHES %@", zipRegex]; BOOL validateZip = [zipTest evaluateWithObject:zipString]; if(!validateZip) { UIAlertView *alert2 = [[UIAlertView alloc] initWithTitle:nil message:@"Incorrect Zip." delegate:nil cancelButtonTitle:@"OK" otherButtonTitles:nil]; [alert2 show]; [alert2 release]; txtZip.text = nil; } } return NO; }

  Read the article

• "type" Command Not Working As Expected on Git Bash

  - by trysis

  The type command, in Linux, returns the location, on the filesystem, of the given file, if it is in the current folder or the $PATH. This functionality is also available through Windows with the Git Bash command line program. The command also returns a file's location given the file without its extension (.exe, .vbs, etc.) However, I have run into what seems like a strange corner case where the file exists on the $PATH but doesn't get returned using the command. I am thinking of buying a new computer soon, so I looked up the method of transferring the license key from one computer to another, in preparation for actually doing this. The method I found mentioned the files slmgr.vbs and slui.exe, both of which reside in the C:/Windows\System32 folder, which is in my $PATH, as usual for a Windows computer. However, these two files aren't showing up when I use the type command. Also, neither gets executed when I call the files as commands without their extensions in Git Bash, and only slmgr.vbs gets executed when I call them with the extensions. Finally, slmgr.vbs is shown when listing the folder's contents in Git Bash, as well, but slui.exe isn't. I thought this might have to do with permissions, and, indeed, both files have very restrictive permissions, as you can see in the pictures below, but they both have the same permissions, which wouldn't explain why one gets executed and the other doesn't when called directly, nor why one file is listed on command line but the other isn't. C:\Windows\System32 folder, proving the files exist: File permissions for the Users and Administrators groups for the two files (they are identical): And the folder: type command and its output in Git Bash for the 2 files, plus listing the files in the folder (using grep to filter as the folder is huge), as well as listing part of the $PATH (keep in mind, for all these, that Git Bash changes the paths as they are displayed): Sean@MYPC ~ $ type -a slmgr sh.exe": type: slmgr: not found Sean@MYPC ~ $ type -a slmgr.vbs sh.exe": type: slmgr.vbs: not found Sean@MYPC ~ $ type -a slui sh.exe": type: slui: not found Sean@MYPC ~ $ type -a slui.exe sh.exe": type: slui.exe: not found Sean@MYPC ~ $ slmgr sh.exe": slmgr: command not found Sean@MYPC ~ $ slmgr.vbs /c/WINDOWS/system32/slmgr.vbs: line 2: syntax error near unexpected token `(' /c/WINDOWS/system32/slmgr.vbs: line 2: `' Copyright (c) Microsoft Corporation. A ll rights reserved.' Sean@MYPC ~ $ slui sh.exe": slui: command not found Sean@MYPC ~ $ slui.exe sh.exe": slui.exe: command not found Sean@MYPC ~ $ ls /c/Windows/System32/slui.exe /c/Windows/System32/slmgr.vbs ls: /c/Windows/System32/slui.exe: No such file or directory /c/Windows/System32/slmgr.vbs Sean@MYPC ~ $ echo $PATH /c/Users/Sean/bin:.:/usr/local/bin:/mingw/bin:/bin:/cmd:/c/Python33/:/c/Program Files (x86)/Intel/iCLS Client/:/c/Program Files/Intel/iCLS Client/:/c/WINDOWS/sy stem32:/c/WINDOWS:/c/WINDOWS/System32/Wbem:/c/WINDOWS/System32/WindowsPowerShell /v1.0/:/c/Program Files/Intel/Intel(R) Management Engine Components/DAL:/c/Progr am Files/Intel/Intel(R) Management Engine Components/IPT:/c/Program Files (x86)/ Intel/Intel(R) Management Engine Components/DAL:/c/Program Files (x86)/Intel/Int el(R) Management Engine Components/IPT:/c/Program Files/Intel/WiFi/bin/:/c/Progr am Files/Common Files/Intel/WirelessCommon/:/c/strawberry/c/bin:/c/strawberry/pe rl/site/bin:/c/strawberry/perl/bin:/c/Program Files (x86)/Microsoft ASP.NET/ASP. NET Web Pages/v1.0/:/c/Program Files/Microsoft SQL Server/110/Tools/Binn/:/c/Pro gram Files (x86)/Microsoft SQL Server/90/Tools/binn/:/c/Program Files (x86)/Open AFS/Common:/c/HashiCorp/Vagrant/bin:/c/Program Files (x86)/Windows Kits/8.1/Wind ows Performance Toolkit/:/c/Program Files/nodejs/:/c/Program Files (x86)/Git/cmd :/c/Program Files (x86)/Git/bin:/c/Program Files/Microsoft/Web Platform Installe r/:/c/Ruby200-x64/bin:/c/Users/Sean/AppData/Local/Box/Box Edit/:/c/Program Files (x86)/SSH Communications Security/SSH Secure Shell:/c/Users/Sean/Documents/Lisp :/c/Program Files/GCL-2.6.1/lib/gcl-2.6.1/unixport:/c/Chocolatey/bin:/c/Users/Se an/AppData/Roaming/npm:/c/wamp/bin/mysql/mysql5.6.12/bin:/c/Program Files/Oracle /VirtualBox:/c/Program Files/Java/jdk1.7.0_51/bin:/c/Program Files/Node-Growl:/c /chocolatey/bin:/c/Program Files/eclipse:/c/MongoDB/bin:/c/Program Files/7-Zip:/ c/Program Files (x86)/Google/Chrome/Application:/c/Program Files (x86)/LibreOffi ce 4/program:/c/Program Files (x86)/OpenOffice 4/program What's happening? Why aren't these files listed with the type command? Is this issue because of weird Windows permissions, or something even weirder? If permissions, why do they seem to have the same permissions, yet both are not handled in the same way?

  Read the article

• RSS feed doesnt display items. Only title

  - by Quaze

  So i just made my first RSS feed, or so i tought, in combination with CI. Now my view DOES display the top of my rss page (Title and Description), But all items are omitted. When i rightclick-view source it DOES contain all the items within the item tags. Can anyone help me? View (rss.php): <?php echo '<?xml version="1.0" encoding="'.$encoding.'"?>'."\n"; ?> <rss version="2.0" xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:sy="http://purl.org/rss/1.0/modules/syndication/" xmlns:admin="http://webns.net/mvcb/" xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:content="http://purl.org/rss/1.0/modules/content/"> <channel> <title><?php echo $feed_name; ?></title> <link><?php echo $feed_url; ?></link> <description><?php echo $page_description; ?></description> <dc:language><?php echo $page_language; ?></dc:language> <dc:creator><?php echo $creator_email; ?></dc:creator> <dc:rights>Copyright <?php echo gmdate("%Y", time()); ?></dc:rights> <dc:date><?php echo gmdate("%Y-%m-&#xdT;%H:%i:%s%Q", time()); ?></dc:date> <admin:generatorAgent rdf:resource="http://www.codeigniter.com/" /> <?php foreach($items as $entry): ?> <?php $entry_url = base_url().$this->lang->lang().$localized_news[$this->lang->lang()].'/'.print_date(strtotime($entry->published), "{year}/{month2}").'/'.$entry->slug; ?> <item> <title><?php echo xml_convert($entry->title); ?></title> <link><?php echo $entry_url; ?></link> <guid><?php echo $entry_url; ?></guid> <description><?php echo $entry->summary; ?></description> <pubDate><?php echo date('r', $entry->published); ?></pubDate> </item> <?php endforeach; ?> </channel> This is what the output looks like: screenshot and in the source, every item needed to be displayed is there. with <item> <link> <description> <guid> and <pubdate> tags. Ive been looking for the cause for about 1.5 hours now. and i cant find anything. Can someone tell me if i did anything wrong? Appreciate the help! ~Menno

  Read the article

• Java Refuses to Start - Could not reserve enough space for object heap

  - by Randyaa

  Background We have a pool of aproximately 20 linux blades. Some are running Suse, some are running Redhat. ALL share NAS space which contains the following 3 folders: /NAS/app/java - a symlink that points to an installation of a Java JDK. Currently version 1.5.0_10 /NAS/app/lib - a symlink that points to a version of our application. /NAS/data - directory where our output is written All our machines have 2 processors (hyperthreaded) with 4gb of physical memory and 4gb of swap space. We limit the number of 'jobs' each machine can process at a given time to 6 (this number likely needs to change, but that does not enter into the current problem so please ignore it for the time being). Some of our jobs set a Max Heap size of 512mb, some others reserve a Max Heap size of 2048mb. Again, we realize we could go over our available memory if 6 jobs started on the same machine with the heap size set to 2048, but to our knowledge this has not yet occurred. The Problem Once and a while a Job will fail immediately with the following message: Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. We used to chalk this up to too many jobs running at the same time on the same machine. The problem happened infrequently enough (MAYBE once a month) that we'd just restart it and everything would be fine. The problem has recently gotten much worse. All of our jobs which request a max heap size of 2048m fail immediately almost every time and need to get restarted several times before completing. We've gone out to individual machines and tried executing them manually with the same result. Debugging It turns out that the problem only exists for our SuSE boxes. The reason it has been happening more frequently is becuase we've been adding more machines, and the new ones are SuSE. 'cat /proc/version' on the SuSE boxes give us: Linux version 2.6.5-7.244-bigsmp (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Mon Dec 12 18:32:25 UTC 2005 'cat /proc/version' on the RedHat boxes give us: Linux version 2.4.21-32.0.1.ELsmp ([email protected]) (gcc version 3.2.3 20030502 (Red Hat Linux 3.2.3-52)) #1 SMP Tue May 17 17:52:23 EDT 2005 'uname -a' gives us the following on BOTH types of machines: UTC 2005 i686 i686 i386 GNU/Linux No jobs are running on the machine, and no other processes are utilizing much memory. All of the processes currently running might be using 100mb total. 'top' currently shows the following: Mem: 4146528k total, 3536360k used, 610168k free, 132136k buffers Swap: 4194288k total, 0k used, 4194288k free, 3283908k cached 'vmstat' currently shows the following: procs -----------memory---------- ---swap-- -----io---- --system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 610292 132136 3283908 0 0 0 2 26 15 0 0 100 0 If we kick off a job with the following command line (Max Heap of 1850mb) it starts fine: java/bin/java -Xmx1850M -cp helloworld.jar HelloWorld Hello World If we bump up the max heap size to 1875mb it fails: java/bin/java -Xmx1875M -cp helloworld.jar HelloWorld Error occurred during initialization of VM Could not reserve enough space for object heap Could not create the Java virtual machine. It's quite clear that the memory currently being used is for Buffering/Caching and that's why so little is being displayed as 'free'. What isn't clear is why there is a magical 1850mb line where anything higher means Java can't start. Any explanations would be greatly appreciated.

  Read the article

• CodePlex Daily Summary for Tuesday, March 02, 2010

  CodePlex Daily Summary for Tuesday, March 02, 2010New ProjectsAcceptance Test Excel Addin: Acceptance Test Excel Addin is a tool to author, execute and analyze acceptance tests in Excel. The tester write tests using Given-When-Then (Gherk...Adrastus: Related to manage Issue/Item of any type. To be defined later TBDAn opportunity of upgrading Linux operating system: Want to add a new software in Linux operating system? Here is an opportunity. UFS (User Friendly Scheduler) has been designed to make the operating...AspNetPager: AspNetPager is a free custom paging control for ASP.NET web form application. It's one of the most popular ASP.NET third party controls used by chi...AzureRunMe: Run Java, Ruby, Python, [insert language of your choice] applications in Windows Azure. You provide a self contained ZIP file with a runme.bat f...DiffPlex - a .NET Diff Generator: DiffPlex is a combination of a .NET Diffing Library with both a Silverlight and HTML diff viewer.GPA WebClient: GPA project web client.Maintenance Service: A lot of projects need to have a windows service that execute different tasks. If am tired of creating the same service for all this project, so He...Marager Component Framework: Marager Component Framework (mcf)Pod Thrower: An application that gives a simple way to create podcast rss feeds from local computer folders.Rapidshare Episode Downloader: Rapidshare Episode Downloader is a software that enables you (yes, you!) to organize your many episodes of different TV shows in a nice list, prese...Resxus - Total .net string resource management tool: RESXUS is a resource file management tool which is being created under my job-experience of managing multilingual resx files. The first goal of th...SLFX: SLFXTheWhiteAmbit: Hybrid Scanline-Raytracing Engine. VisitorPattern based Scenegraph written in C++. DirectX9 or DirectX10 rendering is used for PrimaryRays and CUDA...TSqlMigrations: Yet another migrations platform right? This is purely sql based (tsql as it is only for Sql Server at this time). This tool is meant to help mana...WAFFLE: Windows Authentication Functional Framework (LE): WAFFLE - Windows Authentication Functional Framework (Light Edition) is a .NET library with a COM interface and a Java bridge that provides a worki...web lib api: This project aim, to pull together the major, web api/webservices for each relervant categorie.WSDLGenerator: A tool to generate a WSDL file from a c# dll which contains one more Microsoft WebServices. The project is build using VS2010RC and uses .net Fram...XNA Re-usable UI Components: The aim of this project is to create a re-usable set of UI game components helping reduce production time for your game. More information can be...YUI Compressor Custom Tool for Visual Studio: This EXTREMELY simple custom tool is used to automatically generate a *.min.css file from your existing code on save. It is merely a packaged versi...New ReleasesAcceptance Test Excel Addin: 1.0.0.0: How to Use Extract AcceptanceTestExcelAddIn-1.0.0.0.zip Run setup.exe Extract PasswordSample.zip Open Excel, your will see a new tab, "QA To...An opportunity of upgrading Linux operating system: UFS: The software provided by me is just a basic one that will run in the terminal through gcc compiler. The developers are therefore requested to make ...AspNetPager: Demo project: AspNetPager version 7.3.2 demo web site projectBusiness Framework: Formula Samples: A sample demonstrating textual language - Formula. It can be used is many business scenarios allowing end-user to configure or interact with the sy...Deblector: Deblector 1.1: This build fixes compatibility with .NET Reflector 6.Desktop Dimmer: March 2010: First release, March 2010EasyDump: EasyDump 1.0.1: Easy Dump 1.0.1 fix duplicate output when execute twiceExtensia: Extensia: Extensia is a very large list of extension methods and a few helper types. Many methods have practical utility (e.g. console parsing) whilst some ...Fluent Assertions: Fluent Assertions release 1.0: The first release of the Fluent Assertions. It contains assertions for the most common types and has several extension points.FolderSize: FolderSize.Win32.1.0.6.0: FolderSize.Win32.1.0.6.0 A simple utility intended to be used to scan harddrives for the folders that take most place and display this to the user...GamerShots.com Screenshot Capture: GamerShots.com Screenshot Capture: Windows Form application written in C# ASP.Net. Allows the user to capture a screen by pressing the "Print Scrn" key or by user input. Then uses ...Jet Login Tool (JetLoginTool): Stopped - 1.5.3713.17328: Fixed: Engine will now actually stop when the "Stop" button is hitJolt Environment - RuneScape Emulator: Jolt Environment 1.0.6000 GOLD: Features since 1.0.3200: - Account Creation via client - Character Saving/Loading (via MySQL serialization) - Ground Objects - Ground Items (with m...jQuery Library for SharePoint Web Services: SPServices 0.5.2: NOTE: While I work on new releases, I post alpha versions. Usually the alpha versions are here to address a particular need. I DO NOT recommend us...LINQ to XSD: 1.0.0: The LINQ to XSD technology provides .NET developers with support for typed XML programming. LINQ to XSD contributes to the LINQ project (.NET Langu...Maintenance Service: Alpha Release: Alpha Release of the SoftwareMDownloader: MDownloader-0.15.5.56206: Fixed many gathered bugs;MDownloader: MDownloader-0.15.6.56217: Fixed retrieving hotfile data using registered accounts.MRDS Services for HiTechnic: HiTechnic Controllers: The HiTechnic Controllers package contains services for MRDS that work with the LEGO NXT and TETRIX Servo and Motor Controllers. Initial ReleaseCo...Open NFe: DANFE 1.9.2: Correções do DANFE que serão incluídas na versão 1.9.2PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT: PROGRAMMABLE SOFTWARE DEVELOPMENT ENVIRONMENT-2.4: While testing a standard software parts kit library for strict portability, The following error condition occurred when using the Windows version ...Rapidshare Episode Downloader: RED 0.8: This is an almost fully working version of the software. What DOESN'T work: Showing the list of rapidshare search results (but query is being made...Reusable Library: V1.0.4: A collection of reusable abstractions for enterprise application developer.SharePoint LogViewer: SharePointLogViewer 1.5.1: Follwoing bugs are fixed Bookmarks deleted on refresh/reload Bookmarks not properly navigated on filtered list. Disabled toolbar buttons did n...SharePoint Taxonomy Extensions: SharePoint Taxonomy Extensions 1.1-1: - Some bugfixes - Possibility to switch between alphanummeric und manual sortingSilverSynth - Digital Audio Synthesis for Silverlight: SilverSynth 1.1: SilverSynth 1.1 is a zip file of the source code and includes an updated version of the demo application including presets.SQL Server Reporting Services MSBuild Tasks: Release 1.1.14669: New Features New Task added for Integrated and Native mode: DeleteReportUser Task ReportUserExists TaskTellago DevLabs: BizTalk Data Services v0.2: This release is the first version of the BizTalk Data Services API, a RESTful API for BizTalk Server based on the Open Data (OData) Protocol. The ...VCC: Latest build, v2.1.30301.0: Automatic drop of latest buildWAFFLE: Windows Authentication Functional Framework (LE): 1.2: Build 1.2.4217.0, initial open-source release. - Account lookup locally and in Active Directory. - Enumerating Active Directory domains. - Returns...Watermarker: 0.87: 01.03.2010: • FIXED: some stability fixes • ADDED: ability to choose any number of pictures and folder to save them after the operation completesWSDLGenerator: WSDLGenerator 0.0.0.1: Initial versionXNA Re-usable UI Components: Re-usable Game Components V1.0: First public release of the source codeYUI Compressor Custom Tool for Visual Studio: YUI Compressor Custom Tool with Installer v0.1a: Initial release with alpha installer - documentation to follow.Most Popular ProjectsMetaSharpRawrWBFS ManagerAJAX Control ToolkitMicrosoft SQL Server Product Samples: DatabaseSilverlight ToolkitWindows Presentation Foundation (WPF)Microsoft SQL Server Community & SamplesASP.NETImage Resizer Powertoy Clone for WindowsMost Active ProjectsRawrBlogEngine.NETMapWindow GISpatterns & practices – Enterprise LibraryjQuery Library for SharePoint Web ServicesSharpMap - Geospatial Application Framework for the CLRRapid Entity Framework (ORM). CTP 2DiffPlex - a .NET Diff GeneratorMDT Web FrontEndWPF Dialogs

  Read the article

• CodePlex Daily Summary for Thursday, October 18, 2012

  CodePlex Daily Summary for Thursday, October 18, 2012Popular ReleasesGac Library -- C++ Utilities for GPU Accelerated GUI and Script: Gaclib 0.4.0.0: Gaclib.zip contains the following content GacUIDemo Demo solution and projects Public Source GacUI library Document HTML document. Please start at reference_gacui.html Content Necessary CSS/JPG files for document. Improvements to the previous release Added Windows 8 theme (except tab control, will be provided for the next release) GacUI will choose to use Windows 7 theme or Windows 8 theme as default theme according to OS version Added 1 new demos Template.Window.CustomizedBorder ...Yahoo! UI Library: YUI Compressor for .Net: Version 2.1.1.0 - Sartha (BugFix): - Revered back the embedding of the 2x assemblies.Visual Studio Team Foundation Server Branching and Merging Guide: v2.1 - Visual Studio 2012: Welcome to the Branching and Merging Guide What is new? The Version Control specific discussions have been moved from the Branching and Merging Guide to the new Advanced Version Control Guide. The Branching and Merging Guide and the Advanced Version Control Guide have been ported to the new document style. See http://blogs.msdn.com/b/willy-peter_schaub/archive/2012/10/17/alm-rangers-raising-the-quality-bar-for-documentation-part-2.aspx for more information. Quality-Bar Details Documentatio...D3 Loot Tracker: 1.5.5: Compatible with 1.05.Write Once, Play Everywhere: MonoGame 3.0 (BETA): This is a beta release of the up coming MonoGame 3.0. It contains an Installer which will install a binary release of MonoGame on windows boxes with the following platforms. Windows, Linux, Android and Windows 8. If you need to build for iOS or Mac you will need to get the source code at this time as the installers for those platforms are not available yet. The installer will also install a bunch of Project templates for Visual Studio 2010 , 2012 and MonoDevleop. For those of you wish...Windawesome: Windawesome v1.4.1 x64: Fixed switching of applications across monitors Changed window flashing API (fix your config files) Added NetworkMonitorWidget (thanks to weiwen) Any issues/recommendations/requests for future versions? This is the 64-bit version of the release. Be sure to use that if you are on a 64-bit Windows. Works with "Required DLLs v3".CODE Framework: 4.0.21017.0: See change log in the Documentation section for details.Global Stock Exchange (Hobby Project): Global Stock Exchange - Invst Banking (Hobby Proj): Initial VersionMagelia WebStore Open-source Ecommerce software: Magelia WebStore 2.1: Add support for .net 4.0 to Magelia.Webstore.Client and StarterSite version 2.1.254.3 Scheduler Import & Export feature (for Professional and Entreprise Editions) UTC datetime and timezone support .net 4.5 and Visual Studio 2012 migration client magelia global refactoring release of a nugget package to help developers speed up development http://nuget.org/packages/Magelia.Webstore.Client optimization of the data update mechanism (a.k.a. "burst") Performance improvment of the d...JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.2: JayData is a unified data access library for JavaScript to CRUD + Query data from different sources like OData, MongoDB, WebSQL, SqLite, HTML5 localStorage, Facebook or YQL. The library can be integrated with Knockout.js or Sencha Touch 2 and can be used on Node.js as well. See it in action in this 6 minutes video Sencha Touch 2 example app using JayData: Netflix browser. What's new in JayData 1.2.2 For detailed release notes check the release notes. Revitalized IndexedDB providerNow you c...JaySvcUtil - generate JavaScript context from OData metadata: JaySvcUtil 1.2.2: You will need the JayData library to use contexts generated with JaySvcUtil! Get it from here: http://jaydata.codeplex.comVFPX: FoxcodePlus: FoxcodePlus - Visual Studio like extensions to Visual FoxPro IntelliSense.Droid Explorer: Droid Explorer 0.8.8.8 Beta: fixed the icon for packages on the desktop fixed the install dialog closing right when it starts removed the link to "set up the sdk for me" as this is no longer supported. fixed bug where the device selection dialog would show, even if there was only one device connected. fixed toolbar from having "gap" between other toolbar removed main menu items that do not have any menus Fiskalizacija za developere: FiskalizacijaDev 1.0: Prva verzija ovog projekta, još je uvijek oznacena kao BETA - ovo znaci da su naša testiranja prošla uspješno :) No, kako mi ne proizvodimo neki software za blagajne, tako sve ovo nije niti isprobano u "realnim" uvjetima - svaka je sugestija, primjedba ili prijava bug-a je dobrodošla. Za sve ovo koristite, molimo, Discussions ili Issue Tracker. U ovom trenutku runtime binary je raspoloživ kao Any CPU za .NET verzije 2.0. Javite ukoliko trebaju i verzije buildane za 32-bit/64-bit kao i za .N...Squiggle - A free open source LAN Messenger: Squiggle 3.2 (Development): NOTE: This is development release and not recommended for production use. This release is mainly for enabling extensibility and interoperability with other platforms. Support for plugins Support for extensions Communication layer and protocol is platform independent (ZeroMQ, ProtocolBuffers) Bug fixes New /invite command Edit the sent message Disable update check NOTE: This is development release and not recommended for production use.AcDown????? - AcDown Downloader Framework: AcDown????? v4.2: ??●AcDown??????????、??、??、???????。????，????，?????????????????????????。???????????Acfun、????(Bilibili)、??、??、YouTube、??、???、??????、SF????、????????????。 ●??????AcPlay?????，??????、????????????????。 ● AcDown??????????????????，????????????????????????????。 ● AcDown???????C#??，????.NET Framework 2.0??。?????"Acfun?????"。 ????32??64? Windows XP/Vista/7/8 ???? 32??64? ???Linux ????(1)????????Windows XP???，????????.NET Framework 2.0???(x86)，?????"?????????"??? (2)???????????Linux???，????????Mono?? ??2...PHPExcel: PHPExcel 1.7.8: See Change Log for details of the new features and bugfixes included in this release, and methods that are now deprecated. Note changes to the PDF Writer: tcPDF is no longer bundled with PHPExcel, but should be installed separately if you wish to use that 3rd-Party library with PHPExcel. Alternatively, you can choose to use mPDF or DomPDF as PDF Rendering libraries instead: PHPExcel now provides a configurable wrapper allowing you a choice of PDF renderer. See the documentation, or the PDF s...DirectX Tool Kit: October 12, 2012: October 12, 2012 Added PrimitiveBatch for drawing user primitives Debug object names for all D3D resources (for PIX and debug layer leak reporting)Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.70: Fixed issue described in discussion #399087: variable references within case values weren't getting resolved.GoogleMap Control: GoogleMap Control 6.1: Some important bug fixes and couple of new features were added. There are no major changes to the sample website. Source code could be downloaded from the Source Code section selecting branch release-6.1. Thus just builds of GoogleMap Control are issued here in this release. Update 14.Oct.2012 - Client side access fixed NuGet Package GoogleMap Control 6.1 NuGet Package FeaturesBounds property to provide ability to create a map by center and bounds as well; Setting in markup <artem:Goog...New ProjectsAnonymous InfoPath Browser Forms Web Part: Web part for SharePoint 2007 and 2010 that enables the anonymous submission of InfoPath forms.ath sem5 gr3 proj1: just a simple app to learn how to work in groups, just a start in our programming careerAtif M DNNTaskManager: This is a simple task manager AWS for .NET Sample (Amazon EC2, S3, SQS, DynamoDB): Amazon Web Services (AWS) Sample for .NET (C#) with Asp.NET MVC and Web API. Including S3, DynamoDB, Elastic Beanstalk and SQSCodingWheels.DataTypes: DataTypes tries to make it easier for developers to have concrete typesafe objects for working with many common forms of data. Many times these data objects are just doubles or ints floating through your code with abbreviations on them describing what they represent.Display attachments (list view) SP 2010: Display attachments (SP 2010) is a field for all type lists without types: Document library, Image library, Links, Surveys.Donation Tracker: This is a school projectEveHQ : The Internet Spaceship Toolkit: Multi-faceted character application for Eve-Online. Includes pilot monitoring, skill queue planning, ship fitting, industry and more.EventConni: EventConniFileCloud.Net: FileCloud.NET is a .Net wrapper for http://filecloud.io/ service API.Foodies: FoodiesForce PowerPivot Refresh: This project contains an c# utility class (CustomDataRefreshUtils) to refresh a PowerPivot file in SharePoint 2010. Geometric Modeling: REnder a mesh with Visual Studio - C#Heavysoft Mince: Heavysoft Mince is an opportunity to enhance my skills and to show how free software can be used in enterprise-level systems.HP iLO Management Utility: A small utility to provide a nice interface for managing multiple servers over the iLO interface.iMeeting: iMeeting is a simple application built in Java. iTask: iTask for Windows 8 LamWebOS: this is test project.MackProjects_Musicallis: Projeto da disciplina de Técnicas de Programação Aplicada II da Universidade Presbiteriana Mackenzie - SP.Merge PDF: MergePDF is an easy and simple tool which could help you batch merge PDF files (any number you want) into one PDF file quickly. It is completely free. With MerNetGen: O NetGen é um projeto de geração automatizada de interface Web em ASP.NET a partir de modelo de classes do LINQ-TO-SQL, estando disponível como um Addin para o Visual Studio 2008.Other Ways: ?? ! ????!!!!!Physical Therapy Timer: A simple Windows application that makes it easy to set a countdown timer for a required time period, and keep track of how many times the timer has be run.PicoMax: This version of PicoMax has everything you need to use the Seeed OLED without the MS Graphics class. It can be used in Gadgeteer or a regular NETMF project.post tracker: ASP, WEB API, WINDOWS PhoneRandomEngine: Open Source Game Engine.Resident Raver: This is Windows 8 version of Resident Raver which I wrote for my Intro To HTML5 Game Dev book. It requires the Impact JavaScript game framework.RogueTS: RogueTS is a Roguelike engine written in TypeScript. It features randomly generated maps, basic lighting effects, collision detection and additional stub code.RonYeeStores: ????????????，??C2C?B2C???????????。ShangHaiTunnel monitor: shang hai tunnel projectSharePoint List Security: Free, open source set of features for SharePoint 2010 to enhance the OOTB list permissions by adding column level permissions for users and groups.Skywave Code Lines Counter: It is a tiny program which will count real written lines of code. Real lines means that we removed autogenerated lines, empty lines and single '{' or '}' lines (in C#) and ... Currently supports .cs and .vb files (for C# and VB) It will say how much you worked ;-)switchcontroles: HAT Switch controle sy seguimientoSyscore: Steps : 1 - Definitions 2 - Requirements 3 - Projecting 4 - Delegation 5 - Prototyping 6 - Testing/Analizing 7 - Finalizing 8 - Distribution 9 - Congratulationstarikscodeplexproject: tarikscodeplexprojectTaskManager04: This project is an effort to implement the coding examples given in the TASK MANAGER video series into a working DotNetNuke program.testc: this is a test ,heihei,yongshengtesttom10172012git01: fds fs fs fs tsUnit - TypeScript Unit Testing Framework: tsUnit is a unit testing framework for TypeScript, written in TypeScript. It allows you to encapsulate your test functions in classes and modules.WebGrease: WebGrease is a suite of tools for optimizing javascript, css files and images.????: ??《?????》、《??》、《???》、《??》???。。。

  Read the article

• Why is the upgrade manager freezing when upgrading to 13.10

  - by Nil

  Earlier today I started to upgrade to 13.10 only to return much much later and notice that the update manager was still running. It seems to be frozen and I am reluctant to hit ctrl+C. I can't launch nautilus using the icon on the launcher. When I try to run it via the terminal, this is what happens: $ nautilus Could not register the application: GDBus.Error:org.freedesktop.DBus.Error.UnknownMethod: No such interface `org.gtk.Actions' on object at path /org/gnome/Nautilus My printers aren't showing up when I attempt to print. I don't know whether these a symptoms of the same problem. Should I let the update manage continue to run, or should I shut it down? Here are the processes running if it is any help: $ ps aux USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.2 5920 4072 ? Ss Oct18 0:02 /sbin/init root 2 0.0 0.0 0 0 ? S Oct18 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S Oct18 0:31 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/0:0H] root 6 0.0 0.0 0 0 ? S Oct18 0:00 [kworker/u:0] root 7 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/u:0H] root 8 0.0 0.0 0 0 ? S Oct18 0:00 [migration/0] root 9 0.0 0.0 0 0 ? S Oct18 0:00 [rcu_bh] root 10 0.0 0.0 0 0 ? S Oct18 0:54 [rcu_sched] root 11 0.0 0.0 0 0 ? S Oct18 0:00 [watchdog/0] root 12 0.0 0.0 0 0 ? S Oct18 0:00 [watchdog/1] root 13 0.0 0.0 0 0 ? S Oct18 0:43 [ksoftirqd/1] root 14 0.0 0.0 0 0 ? S Oct18 0:00 [migration/1] root 16 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/1:0H] root 17 0.0 0.0 0 0 ? S< Oct18 0:00 [cpuset] root 18 0.0 0.0 0 0 ? S< Oct18 0:00 [khelper] root 19 0.0 0.0 0 0 ? S Oct18 0:00 [kdevtmpfs] root 20 0.0 0.0 0 0 ? S< Oct18 0:00 [netns] root 21 0.0 0.0 0 0 ? S Oct18 0:00 [bdi-default] root 22 0.0 0.0 0 0 ? S< Oct18 0:00 [kintegrityd] root 23 0.0 0.0 0 0 ? S< Oct18 0:00 [kblockd] root 24 0.0 0.0 0 0 ? S< Oct18 0:00 [ata_sff] root 25 0.0 0.0 0 0 ? S Oct18 0:00 [khubd] root 26 0.0 0.0 0 0 ? S< Oct18 0:00 [md] root 27 0.0 0.0 0 0 ? S< Oct18 0:00 [devfreq_wq] root 29 0.0 0.0 0 0 ? S Oct18 0:00 [khungtaskd] root 30 0.0 0.0 0 0 ? S Oct18 0:09 [kswapd0] root 31 0.0 0.0 0 0 ? SN Oct18 0:00 [ksmd] root 32 0.0 0.0 0 0 ? SN Oct18 0:00 [khugepaged] root 33 0.0 0.0 0 0 ? S Oct18 0:00 [fsnotify_mark] root 34 0.0 0.0 0 0 ? S Oct18 0:00 [ecryptfs-kthre root 35 0.0 0.0 0 0 ? S< Oct18 0:00 [crypto] root 46 0.0 0.0 0 0 ? S< Oct18 0:00 [kthrotld] root 49 0.0 0.0 0 0 ? S< Oct18 0:00 [binder] root 69 0.0 0.0 0 0 ? S< Oct18 0:00 [deferwq] root 70 0.0 0.0 0 0 ? S< Oct18 0:00 [charger_manage root 166 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_0] root 167 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_1] root 188 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_2] root 244 0.0 0.0 0 0 ? S Oct18 0:00 [kworker/u:4] root 245 0.0 0.0 0 0 ? S< Oct18 0:00 [ttm_swap] root 260 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_3] root 266 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_4] root 267 0.0 0.0 0 0 ? S Oct18 1:08 [usb-storage] root 268 0.0 0.0 0 0 ? S Oct18 0:00 [scsi_eh_5] root 269 0.0 0.0 0 0 ? S Oct18 0:06 [usb-storage] root 302 0.0 0.0 2904 504 ? S 14:11 0:00 upstart-udev-br root 305 0.0 0.0 12080 1632 ? Ss 14:11 0:00 /lib/systemd/sy root 329 0.0 0.0 0 0 ? S Oct18 0:24 [jbd2/sda2-8] root 330 0.0 0.0 0 0 ? S< Oct18 0:00 [ext4-dio-unwri root 352 0.0 0.0 2944 4 ? S Oct18 0:00 /sbin/ureadahea root 440 0.0 0.0 0 0 ? S Oct18 0:05 [flush-8:0] root 734 0.0 0.0 0 0 ? S< Oct18 0:00 [cfg80211] root 761 0.0 0.0 0 0 ? S< Oct18 0:00 [kpsmoused] root 780 0.0 0.0 0 0 ? S Oct18 0:00 [pccardd] root 784 0.0 0.0 0 0 ? S< Oct18 0:00 [kvm-irqfd-clea root 902 0.0 0.0 0 0 ? S< Oct18 0:00 [hd-audio0] syslog 916 0.0 0.0 31120 680 ? Sl Oct18 0:13 rsyslogd -c5 102 1010 0.0 0.1 4344 1988 ? Ss Oct18 0:04 dbus-daemon --s root 1061 0.0 0.0 4844 924 ? Ss Oct18 0:00 /usr/sbin/bluet root 1077 0.0 0.0 2268 388 ? Ss Oct18 0:00 /bin/sh /etc/in root 1079 0.0 0.0 4664 484 tty4 Ss+ Oct18 0:00 /sbin/getty -8 root 1087 0.0 0.0 4664 484 tty5 Ss+ Oct18 0:00 /sbin/getty -8 root 1089 0.0 0.0 0 0 ? S< Oct18 0:00 [krfcommd] root 1098 0.0 0.0 4664 484 tty2 Ss+ Oct18 0:00 /sbin/getty -8 root 1099 0.0 0.1 4408 2076 tty3 Ss Oct18 0:00 /bin/login -- root 1101 0.0 0.0 4664 484 tty6 Ss+ Oct18 0:00 /sbin/getty -8 root 1168 0.0 0.0 2780 524 ? Ss Oct18 0:00 cron daemon 1169 0.0 0.0 2636 212 ? Ss Oct18 0:00 atd root 1183 0.0 0.0 34872 1448 ? SLsl Oct18 0:00 lightdm root 1249 0.0 0.0 3536 468 ? S Oct18 0:00 /bin/bash /etc/ root 1254 4.2 2.2 125832 40040 tty7 Rsl+ Oct18 81:27 /usr/bin/X :0 - root 1261 0.0 0.0 2268 344 ? S Oct18 0:00 /bin/sh /etc/ac root 1265 0.0 0.1 42004 2836 ? Ssl Oct18 0:01 NetworkManager root 1272 0.0 0.0 2268 376 ? S Oct18 0:00 /bin/sh /usr/sb root 1286 0.0 0.3 30616 5824 ? Sl Oct18 0:05 /usr/lib/policy root 1304 0.0 0.0 2268 372 ? D Oct18 0:00 /bin/sh /usr/li root 1360 0.0 0.0 5532 560 ? S Oct18 0:00 /sbin/dhclient nobody 1368 0.0 0.0 5476 784 ? S Oct18 0:00 /usr/sbin/dnsma root 1514 0.0 0.1 34036 1932 ? Sl Oct18 0:01 /usr/lib/accoun root 1530 0.0 0.0 0 0 ? S Oct18 0:00 [kauditd] root 1536 0.0 0.1 30480 2260 ? Sl Oct18 0:01 /usr/sbin/conso root 1653 0.0 0.1 28908 2104 ? Sl Oct18 0:00 /usr/lib/upower root 1698 0.0 0.0 17464 1388 ? Sl Oct18 0:00 lightdm --sessi rtkit 1750 0.0 0.0 21368 696 ? SNl Oct18 0:00 /usr/lib/rtkit/ 1000 1844 0.0 0.1 88116 2320 ? SLl Oct18 0:00 /usr/bin/gnome- 1000 1855 0.0 0.3 73076 5884 ? Ssl Oct18 0:00 gnome-session - 1000 1901 0.0 0.0 4128 24 ? Ss Oct18 0:00 /usr/bin/ssh-ag 1000 1904 0.0 0.0 3880 192 ? S Oct18 0:00 /usr/bin/dbus-l 1000 1905 0.0 0.1 5520 2500 ? Ss Oct18 0:23 //bin/dbus-daem 1000 1915 0.0 0.0 43348 1420 ? Sl Oct18 0:00 /usr/lib/at-spi 1000 1919 0.0 0.0 3412 1252 ? S Oct18 0:01 /bin/dbus-daemo 1000 1922 0.0 0.0 17176 1624 ? Sl Oct18 0:00 /usr/lib/at-spi 1000 1932 0.0 0.5 165916 9124 ? Sl Oct18 0:21 /usr/lib/gnome- 1000 1947 1.9 0.2 100716 4024 ? S<l Oct18 37:48 /usr/bin/pulsea 1000 1949 0.0 0.0 27568 1616 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 1953 0.0 0.0 42628 1184 ? Sl Oct18 0:00 /usr/lib/gvfs// 1000 1962 0.0 0.0 14472 916 ? S Oct18 0:00 /usr/lib/pulsea 1000 1964 0.0 0.1 9548 2480 ? S Oct18 0:00 /usr/lib/i386-l 1000 1980 0.0 0.0 3764 364 ? S Oct18 0:43 syndaemon -i 1. 1000 1987 0.0 0.0 24476 1668 ? Sl Oct18 0:00 /usr/lib/dconf/ 1000 1990 0.0 0.4 122968 8844 ? Sl Oct18 0:00 /usr/lib/policy 1000 1991 0.0 0.2 80480 5392 ? Sl Oct18 0:00 /usr/lib/gnome- 1000 1992 0.0 1.2 167532 22776 ? Sl Oct18 0:07 nautilus -n 1000 1998 0.0 0.4 181444 7744 ? Sl Oct18 0:00 nm-applet 1000 2002 0.0 0.1 38020 2892 ? Sl Oct18 0:00 /usr/lib/gvfs/g root 2012 0.0 0.1 59908 2664 ? Sl Oct18 0:24 /usr/lib/udisks 1000 2024 0.0 0.0 26456 1540 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2028 0.0 0.0 27684 1536 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2036 0.0 0.0 38964 1452 ? Sl Oct18 0:00 /usr/lib/gvfs/g root 2049 0.0 0.0 3328 588 ? Ss Oct18 0:00 /sbin/mount.ntf 1000 2053 0.0 0.0 36792 1284 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2058 0.0 0.1 53664 2364 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2069 0.0 0.4 82816 8112 ? Sl Oct18 0:07 /usr/lib/i386-l 1000 2084 0.0 0.1 17984 2048 ? Sl Oct18 0:00 /usr/lib/gvfs/g 1000 2086 0.0 0.0 2268 392 ? Ss Oct18 0:00 /bin/sh -c /usr 1000 2087 0.0 0.7 68100 12856 ? Sl Oct18 0:13 /usr/bin/gtk-wi 1000 2089 0.0 0.9 98508 17756 ? Sl Oct18 0:13 /usr/lib/unity/ 1000 2091 0.0 0.3 65380 6692 ? Sl Oct18 0:01 /usr/lib/i386-l 1000 2117 0.0 0.2 98024 3888 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2125 0.0 0.1 86644 3408 ? Sl Oct18 0:00 /usr/lib/indica 1000 2126 0.0 0.3 84272 6664 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2127 0.0 0.1 94384 2752 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2128 0.0 0.1 83968 2828 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2129 0.0 0.2 150020 4684 ? Sl Oct18 0:01 /usr/lib/i386-l 1000 2130 0.0 0.2 86572 3884 ? Sl Oct18 0:00 /usr/lib/indica 1000 2131 0.0 0.1 69352 2524 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2144 0.0 0.1 74192 3152 ? Sl Oct18 0:00 /usr/lib/evolut 1000 2182 0.0 0.2 101120 4420 ? Sl Oct18 0:02 /usr/lib/gnome- 1000 2193 0.0 0.3 77752 6448 ? Sl Oct18 0:00 telepathy-indic 1000 2200 0.0 0.1 44032 2708 ? Sl Oct18 0:00 /usr/lib/telepa 1000 2209 0.0 0.2 77664 3860 ? Sl Oct18 0:02 zeitgeist-datah 1000 2216 0.0 0.2 44464 4180 ? Sl Oct18 0:01 /usr/bin/zeitge root 2234 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/1:1H] 1000 2246 0.0 1.1 93428 21256 ? Sl Oct18 0:02 /usr/bin/python 1000 2284 0.0 0.6 110040 11656 ? Sl Oct18 0:14 /usr/lib/i386-l 1000 2289 0.0 0.2 85632 3728 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2296 0.0 0.1 77900 3388 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2298 0.0 0.6 120356 11992 ? Sl Oct18 0:00 /usr/bin/python 1000 2300 0.0 0.1 87560 2408 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2301 0.0 0.2 91764 4404 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2303 0.0 0.2 78224 4592 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2370 0.0 0.2 74976 4908 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2372 0.0 0.4 106760 8972 ? Sl Oct18 0:00 /usr/bin/python 1000 2394 0.0 0.1 95624 2736 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2433 0.0 0.1 46640 2124 ? Sl Oct18 0:00 /usr/lib/i386-l 1000 2457 0.0 0.0 34496 1648 ? Sl Oct18 0:00 /usr/lib/libuni root 2513 0.0 0.0 0 0 ? S< Oct18 0:00 [kworker/0:1H] 1000 3361 0.0 0.0 2268 396 ? SN 07:54 0:20 /bin/sh -c /usr root 4919 1.8 2.1 201196 38760 ? SNl 13:29 11:25 /usr/bin/python root 4957 0.0 0.0 3880 400 ? SN 13:29 0:00 dbus-launch --a root 4958 0.0 0.0 3424 1196 ? SNs 13:29 0:05 //bin/dbus-daem root 5128 0.0 0.0 2268 416 ? SN 13:50 0:00 /bin/sh -c whil root 5141 0.0 0.0 2436 508 ? SN 13:50 0:00 gnome-pty-helpe root 5145 0.0 1.7 245280 30872 pts/1 SNs+ 13:50 0:05 /usr/bin/python root 5159 0.0 0.4 64200 7432 ? SNl 13:50 0:05 /usr/bin/gnome- root 5163 0.0 0.0 27440 1552 ? SNl 13:50 0:00 /usr/lib/gvfs/g root 5167 0.0 0.0 42628 1648 ? SNl 13:50 0:00 /usr/lib/gvfs// root 9236 0.0 0.1 19112 2680 ? Ss 14:33 0:00 /usr/sbin/winbi root 9243 0.0 0.0 19112 1448 ? S 14:33 0:00 /usr/sbin/winbi whoopsie 9409 0.0 0.2 53608 4264 ? Ssl 14:33 0:00 whoopsie root 20087 0.0 0.0 0 0 ? S< 14:34 0:00 [xfsalloc] root 20088 0.0 0.0 0 0 ? S< 14:34 0:00 [xfs_mru_cache] root 20089 0.0 0.0 0 0 ? S< 14:34 0:00 [xfslogd] root 20092 0.0 0.0 0 0 ? S 14:34 0:00 [jfsIO] root 20093 0.0 0.0 0 0 ? S 14:34 0:00 [jfsCommit] root 20094 0.0 0.0 0 0 ? S 14:34 0:00 [jfsCommit] root 20095 0.0 0.0 0 0 ? S 14:34 0:00 [jfsSync] root 20845 0.0 0.3 7980 6048 pts/2 SNs+ 14:29 0:04 /usr/bin/dpkg - root 23330 0.0 0.0 2896 568 ? S 14:09 0:00 upstart-file-br root 23332 0.0 0.0 2884 572 ? S 14:09 0:00 upstart-socket- root 24577 0.2 0.0 0 0 ? S 23:09 0:04 [kworker/1:2] root 24656 0.1 0.0 0 0 ? S 23:10 0:02 [kworker/0:0] 1000 24758 2.8 4.7 243692 85516 ? Sl 23:11 0:50 compiz root 25774 0.0 0.0 0 0 ? S< 14:39 0:00 [iprt] 1000 26128 5.5 10.3 641628 187420 ? Sl 23:27 0:46 /usr/lib/firefo root 26374 0.0 0.0 3964 720 ? Ss 14:39 0:02 /usr/sbin/irqba root 26534 0.0 0.0 0 0 ? S 23:34 0:00 [kworker/0:1] root 26564 0.0 0.0 0 0 ? S 23:35 0:00 [kworker/1:1] 1000 26664 0.0 0.1 6784 3068 tty3 S+ 23:36 0:00 -bash 1000 26936 15.2 1.3 67520 23672 ? Sl 23:39 0:21 gnome-system-mo root 26992 0.0 0.0 0 0 ? S 23:40 0:00 [kworker/1:0] root 27049 0.0 0.0 4248 288 ? SN 23:41 0:00 sleep 30 1000 27057 9.5 0.8 68624 16140 ? Rl 23:41 0:00 gnome-terminal 1000 27064 0.0 0.0 2440 704 ? S 23:41 0:00 gnome-pty-helpe 1000 27065 2.6 0.1 6344 2608 pts/3 Ss 23:41 0:00 bash 1000 27113 0.0 0.0 5240 1144 pts/3 R+ 23:41 0:00 ps aux root 28267 0.0 0.0 2216 632 ? Ss 14:39 0:00 acpid -c /etc/a root 28333 0.0 0.0 2272 552 pts/2 SN+ 14:39 0:00 /bin/sh /var/li root 29699 0.0 0.2 8384 4608 pts/2 SN+ 14:40 0:00 modprobe wl

  Read the article

• Ubuntu server has slow performance

  - by Rich

  I have a custom built Ubuntu 11.04 server with a 6 disk software RAID 10 primary drive. On it I'm primarily running a PostgreSQL and a few other utilities that stream data from the web. I often find after a few hours of uptime the server starts to lag with all kinds of processes. For example, it may take 10-15 seconds after log-in to get a shell prompt. It might take 5-10 seconds for top to come up. An ls might take a second or two. When I look at top there is almost no CPU usage. There's a fair amount of memory used by the PostgreSQL server but not enough to bleed into swap. I have no idea where to go from here, other than to suspect the RAID10 (I've only ever had software RAID 1's before). Edit: Output from top: top - 11:56:03 up 1:46, 3 users, load average: 0.89, 0.73, 0.72 Tasks: 119 total, 1 running, 118 sleeping, 0 stopped, 0 zombie Cpu(s): 0.2%us, 0.0%sy, 0.0%ni, 93.5%id, 6.2%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 16325596k total, 3478248k used, 12847348k free, 20880k buffers Swap: 19534176k total, 0k used, 19534176k free, 3041992k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 1747 woodsp 20 0 109m 10m 4888 S 1 0.1 0:42.70 python 357 root 20 0 0 0 0 S 0 0.0 0:00.40 jbd2/sda3-8 1 root 20 0 24324 2284 1344 S 0 0.0 0:00.84 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.24 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 10 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/1 12 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/1 13 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/2 14 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/2:0 15 root 20 0 0 0 0 S 0 0.0 0:00.00 ksoftirqd/2 16 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/2 17 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/3 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/3:0 19 root 20 0 0 0 0 S 0 0.0 0:00.02 ksoftirqd/3 20 root RT 0 0 0 0 S 0 0.0 0:00.01 watchdog/3 21 root 0 -20 0 0 0 S 0 0.0 0:00.00 cpuset 22 root 0 -20 0 0 0 S 0 0.0 0:00.00 khelper 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kdevtmpfs 24 root 0 -20 0 0 0 S 0 0.0 0:00.00 netns 26 root 20 0 0 0 0 S 0 0.0 0:00.00 sync_supers df -h rpsharp@ncp-skookum:~$ df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 1.8T 549G 1.2T 32% / udev 7.8G 4.0K 7.8G 1% /dev tmpfs 3.2G 492K 3.2G 1% /run none 5.0M 0 5.0M 0% /run/lock none 7.8G 0 7.8G 0% /run/shm /dev/sda2 952M 128K 952M 1% /boot/efi /dev/md0 5.5T 562G 4.7T 11% /usr/local free -m psharp@ncp-skookum:~$ free -m total used free shared buffers cached Mem: 15942 3409 12533 0 20 2983 -/+ buffers/cache: 405 15537 Swap: 19076 0 19076 tail -50 /var/log/syslog Jul 3 06:31:32 ncp-skookum rsyslogd: [origin software="rsyslogd" swVersion="5.8.6" x-pid="1070" x-info="http://www.rsyslog.com"] rsyslogd was HUPed Jul 3 06:39:01 ncp-skookum CRON[14211]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 06:40:01 ncp-skookum CRON[14223]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:01 ncp-skookum CRON[14328]: (woodsp) CMD (/home/woodsp/bin/mail_tweetupdate # email an update) Jul 3 07:00:01 ncp-skookum CRON[14327]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:00:28 ncp-skookum sendmail[14356]: q63E0SoZ014356: from=woodsp, size=2328, class=0, nrcpts=2, msgid=<[email protected]>, relay=woodsp@localhost Jul 3 07:00:29 ncp-skookum sm-mta[14357]: q63E0Si6014357: from=<[email protected]>, size=2569, class=0, nrcpts=2, msgid=<[email protected]>, proto=ESMTP, daemon=MTA-v4, relay=localhost [127.0.0.1] Jul 3 07:00:29 ncp-skookum sendmail[14356]: q63E0SoZ014356: to=Spencer Wood <[email protected]>,Martin Lacayo <[email protected]>, ctladdr=woodsp (1004/1005), delay=00:00:01, xdelay=00:00:01, mailer=relay, pri=62328, relay=[127.0.0.1] [127.0.0.1], dsn=2.0.0, stat=Sent (q63E0Si6014357 Message accepted for delivery) Jul 3 07:00:29 ncp-skookum sm-mta[14359]: STARTTLS=client, relay=mx3.stanford.edu., version=TLSv1/SSLv3, verify=FAIL, cipher=DHE-RSA-AES256-SHA, bits=256/256 Jul 3 07:00:29 ncp-skookum sm-mta[14359]: q63E0Si6014357: to=<[email protected]>,<[email protected]>, ctladdr=<[email protected]> (1004/1005), delay=00:00:01, xdelay=00:00:00, mailer=esmtp, pri=152569, relay=mx3.stanford.edu. [171.67.219.73], dsn=2.0.0, stat=Sent (Ok: queued as 8F3505802AC) Jul 3 07:09:08 ncp-skookum CRON[14396]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:17:01 ncp-skookum CRON[14438]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 07:20:01 ncp-skookum CRON[14453]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 07:39:01 ncp-skookum CRON[14551]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 07:40:01 ncp-skookum CRON[14562]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:00:01 ncp-skookum CRON[14668]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:09:01 ncp-skookum CRON[14724]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:17:01 ncp-skookum CRON[14766]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Jul 3 08:20:01 ncp-skookum CRON[14781]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Jul 3 08:39:01 ncp-skookum CRON[14881]: (root) CMD ( [ -x /usr/lib/php5/maxlifetime ] && [ -d /var/lib/php5 ] && find /var/lib/php5/ -depth -mindepth 1 -maxdepth 1 -type f -cmin +$(/usr/lib/php5/maxlifetime) ! -execdir fuser -s {} 2>/dev/null \; -delete) Jul 3 08:40:01 ncp-skookum CRON[14892]: (smmsp) CMD (test -x /etc/init.d/sendmail && /usr/share/sendmail/sendmail cron-msp) Output of hdparm -t /dev/sd{a,b,c,d,e,f} This looks suspicious? /dev/sda: Timing buffered disk reads: 2 MB in 4.84 seconds = 423.39 kB/sec /dev/sdb: Timing buffered disk reads: 420 MB in 3.01 seconds = 139.74 MB/sec /dev/sdc: Timing buffered disk reads: 390 MB in 3.00 seconds = 129.87 MB/sec /dev/sdd: Timing buffered disk reads: 416 MB in 3.00 seconds = 138.51 MB/sec /dev/sde: Timing buffered disk reads: 422 MB in 3.00 seconds = 140.50 MB/sec /dev/sdf: Timing buffered disk reads: 416 MB in 3.01 seconds = 138.26 MB/sec

  Read the article

• How to stop a ICMP attack?

  - by cumhur onat

  We are under a heavy icmp flood attack. Tcpdump shows the result below. Altough we have blocked ICMP with iptables tcpdump still prints icmp packets. I've also attached iptables configuration and "top" result. Is there any thing I can do to completely stop icmp packets? [root@server downloads]# tcpdump icmp -v -n -nn tcpdump: listening on eth0, link-type EN10MB (Ethernet), capture size 96 bytes 03:02:47.810957 IP (tos 0x0, ttl 49, id 16007, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 124, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811559 IP (tos 0x0, ttl 49, id 16010, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.811922 IP (tos 0x0, ttl 49, id 16012, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812485 IP (tos 0x0, ttl 49, id 16015, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 126, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812613 IP (tos 0x0, ttl 49, id 16016, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.812992 IP (tos 0x0, ttl 49, id 16018, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 122, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.813582 IP (tos 0x0, ttl 49, id 16020, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 52, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814092 IP (tos 0x0, ttl 49, id 16023, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.814233 IP (tos 0x0, ttl 49, id 16024, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 120, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815579 IP (tos 0x0, ttl 49, id 16025, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815726 IP (tos 0x0, ttl 49, id 16026, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 IP (tos 0x0, ttl 50, id 31864, offset 0, flags [none], proto: ICMP (1), length: 76) 77.92.136.196 > 94.201.175.188: [|icmp] 03:02:47.815890 IP (tos 0x0, ttl 49, id 16027, offset 0, flags [none], proto: ICMP (1), length: 56) 80.227.64.183 > 77.92.136.196: ICMP redirect 94.201.175.188 to host 80.227.64.129, length 36 iptables configuration: [root@server etc]# iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ofis tcp -- anywhere anywhere tcp dpt:mysql ofis tcp -- anywhere anywhere tcp dpt:ftp DROP icmp -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination DROP icmp -- anywhere anywhere Chain ofis (2 references) target prot opt source destination ACCEPT all -- OUR_OFFICE_IP anywhere DROP all -- anywhere anywhere top: top - 03:12:19 up 400 days, 15:43, 3 users, load average: 1.49, 1.67, 2.61 Tasks: 751 total, 3 running, 748 sleeping, 0 stopped, 0 zombie Cpu(s): 8.2%us, 1.0%sy, 0.0%ni, 87.9%id, 2.1%wa, 0.1%hi, 0.7%si, 0.0%st Mem: 32949948k total, 26906844k used, 6043104k free, 4707676k buffers Swap: 10223608k total, 0k used, 10223608k free, 14255584k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 36 root 39 19 0 0 0 R 100.8 0.0 17:03.56 ksoftirqd/11 10552 root 15 0 11408 1460 676 R 5.7 0.0 0:00.04 top 7475 lighttpd 15 0 304m 22m 15m S 3.8 0.1 0:05.37 php-cgi 1294 root 10 -5 0 0 0 S 1.9 0.0 380:54.73 kjournald 3574 root 15 0 631m 11m 5464 S 1.9 0.0 0:00.65 node 7766 lighttpd 16 0 302m 19m 14m S 1.9 0.1 0:05.70 php-cgi 10237 postfix 15 0 52572 2216 1692 S 1.9 0.0 0:00.02 scache 1 root 15 0 10372 680 572 S 0.0 0.0 0:07.99 init 2 root RT -5 0 0 0 S 0.0 0.0 0:16.72 migration/0 3 root 34 19 0 0 0 S 0.0 0.0 0:00.06 ksoftirqd/0 4 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/0 5 root RT -5 0 0 0 S 0.0 0.0 1:10.46 migration/1 6 root 34 19 0 0 0 S 0.0 0.0 0:01.11 ksoftirqd/1 7 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/1 8 root RT -5 0 0 0 S 0.0 0.0 2:36.15 migration/2 9 root 34 19 0 0 0 S 0.0 0.0 0:00.19 ksoftirqd/2 10 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/2 11 root RT -5 0 0 0 S 0.0 0.0 3:48.91 migration/3 12 root 34 19 0 0 0 S 0.0 0.0 0:00.20 ksoftirqd/3 13 root RT -5 0 0 0 S 0.0 0.0 0:00.00 watchdog/3 uname -a [root@server etc]# uname -a Linux thisis.oursite.com 2.6.18-238.19.1.el5 #1 SMP Fri Jul 15 07:31:24 EDT 2011 x86_64 x86_64 x86_64 GNU/Linux arp -an [root@server downloads]# arp -an ? (77.92.136.194) at 00:25:90:04:F0:90 [ether] on eth0 ? (192.168.0.2) at 00:25:90:04:F0:91 [ether] on eth1 ? (77.92.136.193) at 00:23:9C:0B:CD:01 [ether] on eth0

  Read the article

• High memory usage on the server - can't determine the process

  - by HTF

  I've noticed high memory usage on the server. Details: OS: CentOS 6.3 - x86_64 Web server: Nginx with PHP-FPM The server is generating PDF documents so the traffic is minimum. top: # top -b -n 1 -a top - 10:04:51 up 21 days, 18:57, 1 user, load average: 0.00, 0.00, 0.00 Tasks: 92 total, 1 running, 91 sleeping, 0 stopped, 0 zombie Cpu(s): 0.3%us, 0.2%sy, 0.0%ni, 99.6%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 3923092k total, 3720380k used, 202712k free, 133904k buffers Swap: 4194296k total, 12k used, 4194284k free, 147404k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 15855 www-data 20 0 199m 4952 2128 S 0.0 0.1 0:00.06 php-fpm 15853 www-data 20 0 199m 4940 2028 S 0.0 0.1 0:00.06 php-fpm 15850 www-data 20 0 199m 4928 2020 S 0.0 0.1 0:00.05 php-fpm 15851 www-data 20 0 199m 4888 2020 S 0.0 0.1 0:00.06 php-fpm 15852 www-data 20 0 199m 4852 2020 S 0.0 0.1 0:00.06 php-fpm 15857 www-data 20 0 198m 4716 2020 S 0.0 0.1 0:00.06 php-fpm 17553 root 20 0 97816 3860 2924 S 0.0 0.1 0:00.03 sshd 15849 root 20 0 198m 3460 1072 S 0.0 0.1 0:00.12 php-fpm 13441 nginx 20 0 65608 2968 1604 S 0.0 0.1 0:02.06 nginx 13440 nginx 20 0 65608 2964 1600 S 0.0 0.1 0:01.87 nginx 17561 root 20 0 105m 1944 1488 S 0.0 0.0 0:00.01 bash 1150 xfs 20 0 20980 1784 704 S 0.0 0.0 0:00.13 xfs 15863 root 20 0 179m 1424 1028 S 0.0 0.0 0:00.00 rsyslogd 1 root 20 0 19224 1360 1088 S 0.0 0.0 0:17.96 init 1201 nrpe 20 0 40928 1288 704 S 0.0 0.0 3:57.64 nrpe 13226 root 20 0 114m 1216 612 S 0.0 0.0 0:00.01 crond 6691 root 20 0 64068 1156 488 S 0.0 0.0 0:09.59 sshd 13439 root 20 0 65104 1128 292 S 0.0 0.0 0:00.00 nginx 19026 root 20 0 15040 1116 844 R 0.0 0.0 0:00.00 top 451 root 16 -4 11052 1096 316 S 0.0 0.0 0:00.02 udevd 1174 root 18 -2 11048 1064 288 S 0.0 0.0 0:00.00 udevd 1175 root 18 -2 11048 1064 288 S 0.0 0.0 0:00.00 udevd 1065 root 16 -4 93168 824 560 S 0.0 0.0 0:16.00 auditd 1165 root 20 0 4056 564 480 S 0.0 0.0 0:00.00 mingetty 1167 root 20 0 4056 564 480 S 0.0 0.0 0:00.00 mingetty 1169 root 20 0 4056 564 480 S 0.0 0.0 0:00.00 mingetty 1171 root 20 0 4056 564 480 S 0.0 0.0 0:00.00 mingetty 1163 root 20 0 4056 560 480 S 0.0 0.0 0:00.00 mingetty 1176 root 20 0 4056 560 480 S 0.0 0.0 0:00.00 mingetty 2 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0.0 0.0 0:11.75 migration/0 4 root 20 0 0 0 0 S 0.0 0.0 44:30.28 ksoftirqd/0 5 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0 6 root RT 0 0 0 0 S 0.0 0.0 0:03.51 watchdog/0 7 root RT 0 0 0 0 S 0.0 0.0 0:11.63 migration/1 8 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/1 9 root 20 0 0 0 0 S 0.0 0.0 11:35.50 ksoftirqd/1 10 root RT 0 0 0 0 S 0.0 0.0 0:03.34 watchdog/1 11 root 20 0 0 0 0 S 0.0 0.0 1:36.68 events/0 12 root 20 0 0 0 0 S 0.0 0.0 1:50.57 events/1 13 root 20 0 0 0 0 S 0.0 0.0 0:00.00 cgroup 14 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khelper 15 root 20 0 0 0 0 S 0.0 0.0 0:00.00 netns 16 root 20 0 0 0 0 S 0.0 0.0 0:00.00 async/mgr 17 root 20 0 0 0 0 S 0.0 0.0 0:00.00 pm 18 root 20 0 0 0 0 S 0.0 0.0 0:07.86 sync_supers 19 root 20 0 0 0 0 S 0.0 0.0 0:10.38 bdi-default 20 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kintegrityd/0 21 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kintegrityd/1 22 root 20 0 0 0 0 S 0.0 0.0 0:04.35 kblockd/0 23 root 20 0 0 0 0 S 0.0 0.0 0:04.18 kblockd/1 24 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kacpid 25 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kacpi_notify 26 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kacpi_hotplug 27 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ata/0 28 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ata/1 29 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ata_aux 30 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ksuspend_usbd 31 root 20 0 0 0 0 S 0.0 0.0 0:00.00 khubd 32 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kseriod 33 root 20 0 0 0 0 S 0.0 0.0 0:00.00 md/0 34 root 20 0 0 0 0 S 0.0 0.0 0:00.00 md/1 35 root 20 0 0 0 0 S 0.0 0.0 0:00.00 md_misc/0 36 root 20 0 0 0 0 S 0.0 0.0 0:00.00 md_misc/1 37 root 20 0 0 0 0 S 0.0 0.0 0:00.48 khungtaskd 38 root 20 0 0 0 0 S 0.0 0.0 1:07.52 kswapd0 39 root 25 5 0 0 0 S 0.0 0.0 0:00.00 ksmd 40 root 39 19 0 0 0 S 0.0 0.0 0:22.00 khugepaged 41 root 20 0 0 0 0 S 0.0 0.0 0:00.00 aio/0 42 root 20 0 0 0 0 S 0.0 0.0 0:00.00 aio/1 43 root 20 0 0 0 0 S 0.0 0.0 0:00.00 crypto/0 44 root 20 0 0 0 0 S 0.0 0.0 0:00.00 crypto/1 49 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthrotld/0 50 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kthrotld/1 52 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kpsmoused 53 root 20 0 0 0 0 S 0.0 0.0 0:00.00 usbhid_resumer 83 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kstriped 233 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_0 234 root 20 0 0 0 0 S 0.0 0.0 0:00.00 scsi_eh_1 321 root 20 0 0 0 0 S 0.0 0.0 0:00.00 virtio-blk 359 root 20 0 0 0 0 S 0.0 0.0 0:03.24 kdmflush 360 root 20 0 0 0 0 S 0.0 0.0 0:00.00 kdmflush 380 root 20 0 0 0 0 S 0.0 0.0 0:20.64 jbd2/dm-0-8 381 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit 382 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit 694 root 20 0 0 0 0 S 0.0 0.0 0:00.00 vballoon 697 root 20 0 0 0 0 S 0.0 0.0 0:00.00 virtio-net 818 root 20 0 0 0 0 S 0.0 0.0 0:00.00 jbd2/vda1-8 819 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit 820 root 20 0 0 0 0 S 0.0 0.0 0:00.00 ext4-dio-unwrit 851 root 20 0 0 0 0 S 0.0 0.0 0:06.96 kauditd 1013 root 20 0 0 0 0 S 0.0 0.0 0:15.45 flush-253:0 ps: # ps aux --sort -vsz | head USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND www-data 13213 0.0 0.1 204416 4772 ? S 08:28 0:00 php-fpm: pool default www-data 13214 0.0 0.1 204416 4776 ? S 08:28 0:00 php-fpm: pool default www-data 13215 0.0 0.1 204416 4832 ? S 08:28 0:00 php-fpm: pool default www-data 13216 0.0 0.1 204416 4776 ? S 08:28 0:00 php-fpm: pool default www-data 13218 0.0 0.1 204416 4956 ? S 08:28 0:00 php-fpm: pool default free: #free -m total used free shared buffers cached Mem: 3831 3530 300 0 130 143 -/+ buffers/cache: 3256 574 Swap: 4095 0 4095 When I stooped Nginx, PHP-FPM the memory usage was still the same. Could you help me to investigate what is consuming the memory on the system? Regards

  Read the article

• high load average, high wait, dmesg raid error messages (debian nfs server)

  - by John Stumbles

  Debian 6 on HP proliant (2 CPU) with raid (2*1.5T RAID1 + 2*2T RAID1 joined RAID0 to make 3.5T) running mainly nfs & imapd (plus samba for windows share & local www for previewing web pages); with local ubuntu desktop client mounting $HOME, laptops accessing imap & odd files (e.g. videos) via nfs/smb; boxes connected 100baseT or wifi via home router/switch uname -a Linux prole 2.6.32-5-686 #1 SMP Wed Jan 11 12:29:30 UTC 2012 i686 GNU/Linux Setup has been working for months but prone to intermittently going very slow (user experience on desktop mounting $HOME from server, or laptop playing videos) and now consistently so bad I've had to delve into it to try to find what's wrong(!) Server seems OK at low load e.g. (laptop) client (with $HOME on local disk) connecting to server's imapd and nfs mounting RAID to access 1 file: top shows load ~ 0.1 or less, 0 wait but when (desktop) client mounts $HOME and starts user KDE session (all accessing server) then top shows e.g. top - 13:41:17 up 3:43, 3 users, load average: 9.29, 9.55, 8.27 Tasks: 158 total, 1 running, 157 sleeping, 0 stopped, 0 zombie Cpu(s): 0.4%us, 0.4%sy, 0.0%ni, 49.0%id, 49.7%wa, 0.0%hi, 0.5%si, 0.0%st Mem: 903856k total, 851784k used, 52072k free, 171152k buffers Swap: 0k total, 0k used, 0k free, 476896k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 3935 root 20 0 2456 1088 784 R 2 0.1 0:00.02 top 1 root 20 0 2028 680 584 S 0 0.1 0:01.14 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 4 root 20 0 0 0 0 S 0 0.0 0:00.12 ksoftirqd/0 5 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 7 root 20 0 0 0 0 S 0 0.0 0:00.16 ksoftirqd/1 8 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/1 9 root 20 0 0 0 0 S 0 0.0 0:00.42 events/0 10 root 20 0 0 0 0 S 0 0.0 0:02.26 events/1 11 root 20 0 0 0 0 S 0 0.0 0:00.00 cpuset 12 root 20 0 0 0 0 S 0 0.0 0:00.00 khelper 13 root 20 0 0 0 0 S 0 0.0 0:00.00 netns 14 root 20 0 0 0 0 S 0 0.0 0:00.00 async/mgr 15 root 20 0 0 0 0 S 0 0.0 0:00.00 pm 16 root 20 0 0 0 0 S 0 0.0 0:00.02 sync_supers 17 root 20 0 0 0 0 S 0 0.0 0:00.02 bdi-default 18 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/0 19 root 20 0 0 0 0 S 0 0.0 0:00.00 kintegrityd/1 20 root 20 0 0 0 0 S 0 0.0 0:00.02 kblockd/0 21 root 20 0 0 0 0 S 0 0.0 0:00.08 kblockd/1 22 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpid 23 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_notify 24 root 20 0 0 0 0 S 0 0.0 0:00.00 kacpi_hotplug 25 root 20 0 0 0 0 S 0 0.0 0:00.00 kseriod 28 root 20 0 0 0 0 S 0 0.0 0:04.19 kondemand/0 29 root 20 0 0 0 0 S 0 0.0 0:02.93 kondemand/1 30 root 20 0 0 0 0 S 0 0.0 0:00.00 khungtaskd 31 root 20 0 0 0 0 S 0 0.0 0:00.18 kswapd0 32 root 25 5 0 0 0 S 0 0.0 0:00.00 ksmd 33 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/0 34 root 20 0 0 0 0 S 0 0.0 0:00.00 aio/1 35 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/0 36 root 20 0 0 0 0 S 0 0.0 0:00.00 crypto/1 203 root 20 0 0 0 0 S 0 0.0 0:00.00 ksuspend_usbd 204 root 20 0 0 0 0 S 0 0.0 0:00.00 khubd 205 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/0 206 root 20 0 0 0 0 S 0 0.0 0:00.00 ata/1 207 root 20 0 0 0 0 S 0 0.0 0:00.14 ata_aux 208 root 20 0 0 0 0 S 0 0.0 0:00.01 scsi_eh_0 dmesg suggests there's a disk problem: .............. (previous episode) [13276.966004] raid1:md0: read error corrected (8 sectors at 489900360 on sdc7) [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13279.569186] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13279.569211] ata4.00: irq_stat 0x40000008 [13279.569230] ata4.00: failed command: READ FPDMA QUEUED [13279.569257] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13279.569262] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13279.569306] ata4.00: status: { DRDY ERR } [13279.569321] ata4.00: error: { UNC } [13279.575362] ata4.00: configured for UDMA/133 [13279.575388] ata4: EH complete [13283.169224] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13283.169246] ata4.00: irq_stat 0x40000008 [13283.169263] ata4.00: failed command: READ FPDMA QUEUED [13283.169289] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13283.169294] res 41/40:00:07:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13283.169331] ata4.00: status: { DRDY ERR } [13283.169345] ata4.00: error: { UNC } [13283.176071] ata4.00: configured for UDMA/133 [13283.176104] ata4: EH complete [13286.224814] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13286.224837] ata4.00: irq_stat 0x40000008 [13286.224853] ata4.00: failed command: READ FPDMA QUEUED [13286.224879] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13286.224884] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13286.224922] ata4.00: status: { DRDY ERR } [13286.224935] ata4.00: error: { UNC } [13286.231277] ata4.00: configured for UDMA/133 [13286.231303] ata4: EH complete [13288.802623] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13288.802646] ata4.00: irq_stat 0x40000008 [13288.802662] ata4.00: failed command: READ FPDMA QUEUED [13288.802688] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13288.802693] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13288.802731] ata4.00: status: { DRDY ERR } [13288.802745] ata4.00: error: { UNC } [13288.808901] ata4.00: configured for UDMA/133 [13288.808927] ata4: EH complete [13291.380430] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13291.380453] ata4.00: irq_stat 0x40000008 [13291.380470] ata4.00: failed command: READ FPDMA QUEUED [13291.380496] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13291.380501] res 41/40:00:05:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13291.380577] ata4.00: status: { DRDY ERR } [13291.380594] ata4.00: error: { UNC } [13291.386517] ata4.00: configured for UDMA/133 [13291.386543] ata4: EH complete [13294.347147] ata4.00: exception Emask 0x0 SAct 0x1 SErr 0x0 action 0x0 [13294.347169] ata4.00: irq_stat 0x40000008 [13294.347186] ata4.00: failed command: READ FPDMA QUEUED [13294.347211] ata4.00: cmd 60/08:00:00:6a:05/00:00:23:00:00/40 tag 0 ncq 4096 in [13294.347217] res 41/40:00:06:6a:05/00:00:23:00:00/40 Emask 0x409 (media error) <F> [13294.347254] ata4.00: status: { DRDY ERR } [13294.347268] ata4.00: error: { UNC } [13294.353556] ata4.00: configured for UDMA/133 [13294.353583] sd 3:0:0:0: [sdc] Unhandled sense code [13294.353590] sd 3:0:0:0: [sdc] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [13294.353599] sd 3:0:0:0: [sdc] Sense Key : Medium Error [current] [descriptor] [13294.353610] Descriptor sense data with sense descriptors (in hex): [13294.353616] 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 [13294.353635] 23 05 6a 06 [13294.353644] sd 3:0:0:0: [sdc] Add. Sense: Unrecovered read error - auto reallocate failed [13294.353657] sd 3:0:0:0: [sdc] CDB: Read(10): 28 00 23 05 6a 00 00 00 08 00 [13294.353675] end_request: I/O error, dev sdc, sector 587557382 [13294.353726] ata4: EH complete [13294.366953] raid1:md0: read error corrected (8 sectors at 489900544 on sdc7) [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror and they're happening quite frequently, which I guess is liable to account for the performance problem(?) # dmesg | grep mirror [12433.561822] raid1: sdc7: redirecting sector 489900464 to another mirror [12449.428933] raid1: sdb7: redirecting sector 489900504 to another mirror [12464.807016] raid1: sdb7: redirecting sector 489900512 to another mirror [12480.196222] raid1: sdb7: redirecting sector 489900520 to another mirror [12495.585413] raid1: sdb7: redirecting sector 489900528 to another mirror [12510.974424] raid1: sdb7: redirecting sector 489900536 to another mirror [12526.374933] raid1: sdb7: redirecting sector 489900544 to another mirror [12542.619938] raid1: sdc7: redirecting sector 489900608 to another mirror [12559.431328] raid1: sdc7: redirecting sector 489900616 to another mirror [12576.553866] raid1: sdc7: redirecting sector 489900624 to another mirror [12592.065265] raid1: sdc7: redirecting sector 489900632 to another mirror [12607.621121] raid1: sdc7: redirecting sector 489900640 to another mirror [12623.165856] raid1: sdc7: redirecting sector 489900648 to another mirror [12638.699474] raid1: sdc7: redirecting sector 489900656 to another mirror [12655.610881] raid1: sdc7: redirecting sector 489900664 to another mirror [12672.255617] raid1: sdc7: redirecting sector 489900672 to another mirror [12672.288746] raid1: sdc7: redirecting sector 489900680 to another mirror [12672.332376] raid1: sdc7: redirecting sector 489900688 to another mirror [12672.362935] raid1: sdc7: redirecting sector 489900696 to another mirror [12674.201177] raid1: sdc7: redirecting sector 489900704 to another mirror [12698.045050] raid1: sdc7: redirecting sector 489900712 to another mirror [12698.089309] raid1: sdc7: redirecting sector 489900720 to another mirror [12698.111999] raid1: sdc7: redirecting sector 489900728 to another mirror [12698.134006] raid1: sdc7: redirecting sector 489900736 to another mirror [12719.034376] raid1: sdc7: redirecting sector 489900744 to another mirror [12734.545775] raid1: sdc7: redirecting sector 489900752 to another mirror [12734.590014] raid1: sdc7: redirecting sector 489900760 to another mirror [12734.624050] raid1: sdc7: redirecting sector 489900768 to another mirror [12734.647308] raid1: sdc7: redirecting sector 489900776 to another mirror [12734.664657] raid1: sdc7: redirecting sector 489900784 to another mirror [12734.710642] raid1: sdc7: redirecting sector 489900792 to another mirror [12734.721919] raid1: sdc7: redirecting sector 489900800 to another mirror [12734.744732] raid1: sdc7: redirecting sector 489900808 to another mirror [12734.779330] raid1: sdc7: redirecting sector 489900816 to another mirror [12782.604564] raid1: sdb7: redirecting sector 1242934216 to another mirror [12798.264153] raid1: sdc7: redirecting sector 1242935080 to another mirror [13245.832193] raid1: sdb7: redirecting sector 489898296 to another mirror [13261.376929] raid1: sdb7: redirecting sector 489898304 to another mirror [13276.966043] raid1: sdb7: redirecting sector 489898312 to another mirror [13294.366992] raid1: sdc7: redirecting sector 489898496 to another mirror although the arrays are still running on all disks - they haven't given up on any yet: # cat /proc/mdstat Personalities : [raid1] [raid0] md10 : active raid0 md0[0] md1[1] 3368770048 blocks super 1.2 512k chunks md1 : active raid1 sde2[2] sdd2[1] 1464087824 blocks super 1.2 [2/2] [UU] md0 : active raid1 sdb7[0] sdc7[2] 1904684920 blocks super 1.2 [2/2] [UU] unused devices: <none> So I think I have some idea what the problem is but I am not a linux sysadmin expert by the remotest stretch of the imagination and would really appreciate some clue checking here with my diagnosis and what do I need to do: obviously I need to source another drive for sdc. (I'm guessing I could buy a larger drive if the price is right: I'm thinking that one day I'll need to grow the size of the array and that would be one less drive to replace with a larger one) then use mdadm to fail out the existing sdc, remove it and fit the new drive fdisk the new drive with the same size partition for the array as the old one had use mdadm to add the new drive into the array that sound OK?

  Read the article

• Form contents not showing in email

  - by fmz

  This is a followup to a question I posted yesterday. I thought everything was working fine, but today, I am not getting any results in the email from the drop down field. Here is the form code in question: <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" name="purpose" style="width: 300px; height:35px;"> <option value="" selected="selected">-- Select One --</option> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> It is then processed in PHP and should output the selected option to an email, however the Reason for Contact line always comes through with nothing in it. Here is the PHP code: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> Any assistance would be greatly appreciated. Thanks!

  Read the article

• unexplainable packet drops with 5 ethernet NICs and low traffic on Ubuntu

  - by jon

  I'm stuck on problem where my machine started to drops packets with no sign of ANY system load or high interrupt usage after an upgrade to Ubuntu 12.04. My server is a network monitoring sensor, running Ubuntu LTS 12.04, it passively collects packets from 5 interfaces doing network intrusion type stuff. Before the upgrade I managed to collect 200+GB of packets a day while writing them to disk with around 0% packet loss depending on the day with the help of CPU affinity and NIC IRQ to CPU bindings. Now I lose a great deal of packets with none of my applications running and at very low PPS rate which a modern workstation NIC would have no trouble with. Specs: x64 Xeon 4 cores 3.2 Ghz 16 GB RAM NICs: 5 Intel Pro NICs using the e1000 driver (NAPI). [1] eth0 and eth1 are integrated NICs (in the motherboard) There are 2 other PCI-X network cards, each with 2 Ethernet ports. 3 of the interfaces are running at Gigabit Ethernet, the others are not because they're attached to hubs. Specs: [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm uptime 17:36:00 up 1:43, 2 users, load average: 0.00, 0.01, 0.05 # uname -a Linux nms 3.2.0-29-generic #46-Ubuntu SMP Fri Jul 27 17:03:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux I also have the CPU governor set to performance mode and irqbalance off. The problem still occurs with them on. # lspci -t -vv -[0000:00]-+-00.0 Intel Corporation E7520 Memory Controller Hub +-02.0-[01-03]--+-00.0-[02]----0e.0 Dell PowerEdge Expandable RAID controller 4 | \-00.2-[03]-- +-04.0-[04]-- +-05.0-[05-07]--+-00.0-[06]----07.0 Intel Corporation 82541GI Gigabit Ethernet Controller | \-00.2-[07]----08.0 Intel Corporation 82541GI Gigabit Ethernet Controller +-06.0-[08-0a]--+-00.0-[09]--+-04.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | | \-04.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-00.2-[0a]--+-02.0 Digium, Inc. Wildcard TE210P/TE212P dual-span T1/E1/J1 card 3.3V | +-03.0 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) | \-03.1 Intel Corporation 82546EB Gigabit Ethernet Controller (Copper) +-1d.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #1 +-1d.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #2 +-1d.2 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB UHCI Controller #3 +-1d.7 Intel Corporation 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller +-1e.0-[0b]----0d.0 Advanced Micro Devices [AMD] nee ATI RV100 QY [Radeon 7000/VE] +-1f.0 Intel Corporation 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge \-1f.1 Intel Corporation 82801EB/ER (ICH5/ICH5R) IDE Controller I believe the NIC nor the NIC drivers are dropping the packets because ethtool reports 0 under rx_missed_errors and rx_no_buffer_count for each interface. On the old system, if it couldn't keep up this is where the drops would be. I drop packets on multiple interfaces just about every second, usually in small increments of 2-4. I tried all these sysctl values, I'm currently using the uncommented ones. # cat /etc/sysctl.conf # high net.core.netdev_max_backlog = 3000000 net.core.rmem_max = 16000000 net.core.rmem_default = 8000000 # defaults #net.core.netdev_max_backlog = 1000 #net.core.rmem_max = 131071 #net.core.rmem_default = 163480 # moderate #net.core.netdev_max_backlog = 10000 #net.core.rmem_max = 33554432 #net.core.rmem_default = 33554432 Here's an example of an interface stats report with ethtool. They are all the same, nothing is out of the ordinary ( I think ), so I'm only going to show one: ethtool -S eth2 NIC statistics: rx_packets: 7498 tx_packets: 0 rx_bytes: 2722585 tx_bytes: 0 rx_broadcast: 327 tx_broadcast: 0 rx_multicast: 1504 tx_multicast: 0 rx_errors: 0 tx_errors: 0 tx_dropped: 0 multicast: 1504 collisions: 0 rx_length_errors: 0 rx_over_errors: 0 rx_crc_errors: 0 rx_frame_errors: 0 rx_no_buffer_count: 0 rx_missed_errors: 0 tx_aborted_errors: 0 tx_carrier_errors: 0 tx_fifo_errors: 0 tx_heartbeat_errors: 0 tx_window_errors: 0 tx_abort_late_coll: 0 tx_deferred_ok: 0 tx_single_coll_ok: 0 tx_multi_coll_ok: 0 tx_timeout_count: 0 tx_restart_queue: 0 rx_long_length_errors: 0 rx_short_length_errors: 0 rx_align_errors: 0 tx_tcp_seg_good: 0 tx_tcp_seg_failed: 0 rx_flow_control_xon: 0 rx_flow_control_xoff: 0 tx_flow_control_xon: 0 tx_flow_control_xoff: 0 rx_long_byte_count: 2722585 rx_csum_offload_good: 0 rx_csum_offload_errors: 0 alloc_rx_buff_failed: 0 tx_smbus: 0 rx_smbus: 0 dropped_smbus: 01 # ifconfig eth0 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:373348 errors:16 dropped:95 overruns:0 frame:16 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:356830572 (356.8 MB) TX bytes:0 (0.0 B) eth1 Link encap:Ethernet HWaddr 00:11:43:e0:e2:8d UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:13616 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8690528 (8.6 MB) TX bytes:0 (0.0 B) eth2 Link encap:Ethernet HWaddr 00:04:23:e1:77:6a UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:7750 errors:0 dropped:471 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2780935 (2.7 MB) TX bytes:0 (0.0 B) eth3 Link encap:Ethernet HWaddr 00:04:23:e1:77:6b UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:5112 errors:0 dropped:206 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:639472 (639.4 KB) TX bytes:0 (0.0 B) eth4 Link encap:Ethernet HWaddr 00:04:23:b6:35:6c UP BROADCAST RUNNING NOARP PROMISC ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:961467 errors:0 dropped:935 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:958561305 (958.5 MB) TX bytes:0 (0.0 B) eth5 Link encap:Ethernet HWaddr 00:04:23:b6:35:6d inet addr:192.168.1.6 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:4264 errors:0 dropped:16 overruns:0 frame:0 TX packets:699 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:572228 (572.2 KB) TX bytes:124456 (124.4 KB) I tried the defaults, then started to play around with settings. I wasn't using any flow control and I increased the RxDescriptor count to 4096 before the upgrade as well without any problems. # cat /etc/modprobe.d/e1000.conf options e1000 XsumRX=0,0,0,0,0 RxDescriptors=4096,4096,4096,4096,4096 FlowControl=0,0,0,0,0 debug=16 Here's my network configuration file, I turned off checksumming and various offloading mechanisms along with setting CPU affinity with heavy use interfaces getting an entire CPU and light use interfaces sharing a CPU. I used these settings prior to the upgrade without problems. # cat /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet manual pre-up /sbin/ethtool -G eth0 rx 4096 tx 0 pre-up /sbin/ethtool -K eth0 gro off gso off rx off pre-up /sbin/ethtool -A eth0 rx off autoneg off up ifconfig eth0 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/48/smp_affinity down ifconfig eth0 down post-down /sbin/ethtool -G eth0 rx 256 tx 256 post-down /sbin/ethtool -K eth0 gro on gso on rx on post-down /sbin/ethtool -A eth0 rx on autoneg on auto eth1 iface eth1 inet manual pre-up /sbin/ethtool -G eth1 rx 4096 tx 0 pre-up /sbin/ethtool -K eth1 gro off gso off rx off pre-up /sbin/ethtool -A eth1 rx off autoneg off up ifconfig eth1 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/49/smp_affinity down ifconfig eth1 down post-down /sbin/ethtool -G eth1 rx 256 tx 256 post-down /sbin/ethtool -K eth1 gro on gso on rx on post-down /sbin/ethtool -A eth1 rx on autoneg on auto eth2 iface eth2 inet manual pre-up /sbin/ethtool -G eth2 rx 4096 tx 0 pre-up /sbin/ethtool -K eth2 gro off gso off rx off pre-up /sbin/ethtool -A eth2 rx off autoneg off up ifconfig eth2 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "1" > /proc/irq/82/smp_affinity down ifconfig eth2 down post-down /sbin/ethtool -G eth2 rx 256 tx 256 post-down /sbin/ethtool -K eth2 gro on gso on rx on post-down /sbin/ethtool -A eth2 rx on autoneg on auto eth3 iface eth3 inet manual pre-up /sbin/ethtool -G eth3 rx 4096 tx 0 pre-up /sbin/ethtool -K eth3 gro off gso off rx off pre-up /sbin/ethtool -A eth3 rx off autoneg off up ifconfig eth3 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "2" > /proc/irq/83/smp_affinity down ifconfig eth3 down post-down /sbin/ethtool -G eth3 rx 256 tx 256 post-down /sbin/ethtool -K eth3 gro on gso on rx on post-down /sbin/ethtool -A eth3 rx on autoneg on auto eth4 iface eth4 inet manual pre-up /sbin/ethtool -G eth4 rx 4096 tx 0 pre-up /sbin/ethtool -K eth4 gro off gso off rx off pre-up /sbin/ethtool -A eth4 rx off autoneg off up ifconfig eth4 0.0.0.0 -arp promisc mtu 1500 allmulti txqueuelen 0 up post-up echo "4" > /proc/irq/77/smp_affinity down ifconfig eth4 down post-down /sbin/ethtool -G eth4 rx 256 tx 256 post-down /sbin/ethtool -K eth4 gro on gso on rx on post-down /sbin/ethtool -A eth4 rx on autoneg on auto eth5 iface eth5 inet static pre-up /etc/fw.conf address 192.168.1.1 netmask 255.255.255.0 broadcast 192.168.1.255 gateway 192.168.1.1 dns-nameservers 192.168.1.2 192.168.1.3 up ifconfig eth5 up post-up echo "8" > /proc/irq/77/smp_affinity down ifconfig eth5 down Here's a few examples of packet drops, i ran one after another, probabling totaling 3 or 4 seconds. You can see increases in the drops from the 1st and 3rd. This was a non-busy time, very little traffic. # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 505 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 225 lo: 0 eth2: 507 eth1: 0 eth5: 17 eth0: 105 eth4: 1034 # awk '{ print $1,$5 }' /proc/net/dev Inter-| face drop eth3: 227 lo: 0 eth2: 512 eth1: 0 eth5: 17 eth0: 105 eth4: 1039 I tried the pci=noacpi options. With and without, it's the same. This is what my interrupt stats looked like before the upgrade, after, with ACPI on PCI it showed multiple NICs bound to an interrupt and shared with other devices such as USB drives which I didn't like so I think i'm going to keep it with ACPI off as it's easier to designate sole purpose interrupts. Is there any advantage I would have using the default i.e. ACPI w/ PCI. ? # cat /etc/default/grub | grep CMD_LINE GRUB_CMDLINE_LINUX_DEFAULT="ipv6.disable=1 noacpi pci=noacpi" GRUB_CMDLINE_LINUX="" # cat /proc/interrupts CPU0 CPU1 CPU2 CPU3 0: 45 0 0 16 IO-APIC-edge timer 1: 1 0 0 7936 IO-APIC-edge i8042 2: 0 0 0 0 XT-PIC-XT-PIC cascade 6: 0 0 0 3 IO-APIC-edge floppy 8: 0 0 0 1 IO-APIC-edge rtc0 9: 0 0 0 0 IO-APIC-edge acpi 12: 0 0 0 1809 IO-APIC-edge i8042 14: 1 0 0 4498 IO-APIC-edge ata_piix 15: 0 0 0 0 IO-APIC-edge ata_piix 16: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb2 18: 0 0 0 1350 IO-APIC-fasteoi uhci_hcd:usb4, radeon 19: 0 0 0 0 IO-APIC-fasteoi uhci_hcd:usb3 23: 0 0 0 4099 IO-APIC-fasteoi ehci_hcd:usb1 38: 0 0 0 61963 IO-APIC-fasteoi megaraid 48: 0 0 1002319 4 IO-APIC-fasteoi eth0 49: 0 0 38772 3 IO-APIC-fasteoi eth1 77: 0 0 130076 432159 IO-APIC-fasteoi eth4 78: 0 0 0 23917 IO-APIC-fasteoi eth5 82: 1329033 0 0 4 IO-APIC-fasteoi eth2 83: 0 4886525 0 6 IO-APIC-fasteoi eth3 NMI: 5 6 4 5 Non-maskable interrupts LOC: 61409 57076 64257 114764 Local timer interrupts SPU: 0 0 0 0 Spurious interrupts IWI: 0 0 0 0 IRQ work interrupts RES: 17956 25333 13436 14789 Rescheduling interrupts CAL: 22436 607 539 478 Function call interrupts TLB: 1525 1458 4600 4151 TLB shootdowns TRM: 0 0 0 0 Thermal event interrupts THR: 0 0 0 0 Threshold APIC interrupts MCE: 0 0 0 0 Machine check exceptions MCP: 16 16 16 16 Machine check polls ERR: 0 MIS: 0 Here's sample output of vmstat, showing the system. Barebones system right now. root@nms:~# vmstat -S m 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 0 0 0 14992 192 1029 0 0 56 2 419 29 1 0 99 0 0 0 0 14992 192 1029 0 0 0 0 922 27 0 0 100 0 0 0 0 14991 192 1029 0 0 0 36 763 50 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 646 35 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 722 54 0 0 100 0 0 0 0 14991 192 1029 0 0 0 0 793 27 0 0 100 0 ^C Here's dmesg output. I can't figure out why my PCI-X slots are negotiated as PCI. The network cards are all PCI-X with the exception of the integrated NICs that came with the server. In the output below it looks as if eth3 and eth2 negotiated at PCI-X speeds rather than PCI:66Mhz. Wouldn't they all drop to PCI:66Mhz? If your integrated NICs are PCI, as labeled below (eth0,eth1), then wouldn't all devices on your bus speed drop down to that slower bus speed? If not, I still don't know why only one of my NICs ( each has two ethernet ports) is labeled as PCI-X in the output below. Does that mean it is running at PCI-X speeds are is it showing that it's capable? # dmesg | grep e1000 [ 3678.349337] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI [ 3678.349342] e1000: Copyright (c) 1999-2006 Intel Corporation. [ 3678.349394] e1000 0000:06:07.0: PCI->APIC IRQ transform: INT A -> IRQ 48 [ 3678.409725] e1000 0000:06:07.0: Receive Descriptors set to 4096 [ 3678.409730] e1000 0000:06:07.0: Checksum Offload Disabled [ 3678.409734] e1000 0000:06:07.0: Flow Control Disabled [ 3678.586409] e1000 0000:06:07.0: eth0: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8c [ 3678.586419] e1000 0000:06:07.0: eth0: Intel(R) PRO/1000 Network Connection [ 3678.586642] e1000 0000:07:08.0: PCI->APIC IRQ transform: INT A -> IRQ 49 [ 3678.649854] e1000 0000:07:08.0: Receive Descriptors set to 4096 [ 3678.649859] e1000 0000:07:08.0: Checksum Offload Disabled [ 3678.649863] e1000 0000:07:08.0: Flow Control Disabled [ 3678.826436] e1000 0000:07:08.0: eth1: (PCI:66MHz:32-bit) 00:11:43:e0:e2:8d [ 3678.826444] e1000 0000:07:08.0: eth1: Intel(R) PRO/1000 Network Connection [ 3678.826627] e1000 0000:09:04.0: PCI->APIC IRQ transform: INT A -> IRQ 82 [ 3679.093266] e1000 0000:09:04.0: Receive Descriptors set to 4096 [ 3679.093271] e1000 0000:09:04.0: Checksum Offload Disabled [ 3679.093275] e1000 0000:09:04.0: Flow Control Disabled [ 3679.130239] e1000 0000:09:04.0: eth2: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6a [ 3679.130246] e1000 0000:09:04.0: eth2: Intel(R) PRO/1000 Network Connection [ 3679.130449] e1000 0000:09:04.1: PCI->APIC IRQ transform: INT B -> IRQ 83 [ 3679.397312] e1000 0000:09:04.1: Receive Descriptors set to 4096 [ 3679.397318] e1000 0000:09:04.1: Checksum Offload Disabled [ 3679.397321] e1000 0000:09:04.1: Flow Control Disabled [ 3679.434350] e1000 0000:09:04.1: eth3: (PCI-X:133MHz:64-bit) 00:04:23:e1:77:6b [ 3679.434360] e1000 0000:09:04.1: eth3: Intel(R) PRO/1000 Network Connection [ 3679.434553] e1000 0000:0a:03.0: PCI->APIC IRQ transform: INT A -> IRQ 77 [ 3679.704072] e1000 0000:0a:03.0: Receive Descriptors set to 4096 [ 3679.704077] e1000 0000:0a:03.0: Checksum Offload Disabled [ 3679.704081] e1000 0000:0a:03.0: Flow Control Disabled [ 3679.738364] e1000 0000:0a:03.0: eth4: (PCI:33MHz:64-bit) 00:04:23:b6:35:6c [ 3679.738371] e1000 0000:0a:03.0: eth4: Intel(R) PRO/1000 Network Connection [ 3679.738538] e1000 0000:0a:03.1: PCI->APIC IRQ transform: INT B -> IRQ 78 [ 3680.046060] e1000 0000:0a:03.1: eth5: (PCI:33MHz:64-bit) 00:04:23:b6:35:6d [ 3680.046067] e1000 0000:0a:03.1: eth5: Intel(R) PRO/1000 Network Connection [ 3682.132415] e1000: eth0 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.224423] e1000: eth1 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.316385] e1000: eth2 NIC Link is Up 100 Mbps Half Duplex, Flow Control: None [ 3682.408391] e1000: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.500396] e1000: eth4 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: None [ 3682.708401] e1000: eth5 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX At first I thought it was the NIC drivers but I'm not so sure. I really have no idea where else to look at the moment. Any help is greatly appreciated as I'm struggling with this. If you need more information just ask. Thanks! [1]http://www.cs.fsu.edu/~baker/devices/lxr/http/source/linux/Documentation/networking/e1000.txt?v=2.6.11.8 [2] http://support.dell.com/support/edocs/systems/pe2850/en/ug/t1390aa.htm

  Read the article

• Wired connection periodically disconnects requires ipconfig /release and /renew to reconnect

  - by Sesame

  I just got back into University and after a day of using the internet I suddenly was unable to visit other webpages even though I was still able to chat. I restarted the computer and the internet could no longer visit webpages at all. I got a DNS error from the browser (chrome) and the troubleshooter. The connection comes up as "Network 3" even though It was "Network 2" when it worked. I compared ipconfig /all logs and they seemed identical when it was and was not working. I've found two ways to get internet connection (they no longer work): run ipconfig /release and ipconfig /renew several times set a random address and have the troubleshooter fix the new found dhcp problem (before it says dns cannot fix). I checked and it said DHCP was enabled. But either step one or two usually needs to be repeated several times before the network will change back to "network 2" from the defunct "network 3" and after an hour or so I have problems again. I've tried: Uninstalling windows defender and turning off firewall (windows firewall). Updating Qualcomm Ethernet driver - it is up to date. System Restore (problem resurfaces quickly...it's possible this has something to do with windows update?) Flushing dns and setting dns myself (google one and others). Booting in safe mode with networking...didn't fix anything Reinstalling Ethernet Driver Using other ethernet cable, other wall port. I'm out of ideas. Ipconfig /all: Windows IP Configuration Host Name . . . . . . . . . . . . : NGoller Primary Dns Suffix . . . . . . . : Node Type . . . . . . . . . . . . : Hybrid IP Routing Enabled. . . . . . . . : No WINS Proxy Enabled. . . . . . . . : No DNS Suffix Search List. . . . . . : Home Ethernet adapter UConnect: Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Qualcomm Atheros AR8151 PCI-E Gigabit Ethernet Controller Physical Address. . . . . . . . . : 90-2B-34-50-33-F4 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv6 Address. . . . . . . . . . . : fd00::2086:628:f0a1:73c3(Preferred) Temporary IPv6 Address. . . . . . : fd00::c86b:370:b1d9:bd73(Preferred) Link-local IPv6 Address . . . . . : fe80::2086:628:f0a1:73c3%11(Preferred) IPv4 Address. . . . . . . . . . . : 192.168.0.33(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : Wednesday, August 28, 2013 11:58:37 PM Lease Expires . . . . . . . . . . : Thursday, August 29, 2013 11:58:37 PM Default Gateway . . . . . . . . . : 192.168.0.1 DHCP Server . . . . . . . . . . . : 192.168.0.1 DNS Servers . . . . . . . . . . . : 192.168.0.1 NetBIOS over Tcpip. . . . . . . . : Enabled Tunnel adapter isatap.Home: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Home Description . . . . . . . . . . . : Microsoft ISATAP Adapter Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes Tunnel adapter Teredo Tunneling Pseudo-Interface: Media State . . . . . . . . . . . : Media disconnected Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Teredo Tunneling Pseudo-Interface Physical Address. . . . . . . . . : 00-00-00-00-00-00-00-E0 DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes I'm getting these errors commonly: The IP address lease 155.97.227.199 for the Network Card with network address 0x902B345033F4 has been denied by the DHCP server 10.0.1.1 (The DHCP Server sent a DHCPNACK message). Event filter with query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA "Win32_Processor" AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace "//./root/CIMV2" because of error 0x80041003. Events cannot be delivered through this filter until the problem is corrected. By the way, Operating System: Windows 7 - 64 Bit. Have downloaded latest windows updates. Update: And my two fixes don't work any more :( . This is now what happens when I try to Ipconfig /renew: C:\Users\Nikko\Desktop>ipconfig /renew Windows IP Configuration An error occurred while renewing interface Local Area Connection : The name spec ified in the network control block (NCB) is in use on a remote adapter. The NCB is the data. An error occurred while releasing interface Loopback Pseudo-Interface 1 : The sy stem cannot find the file specified. Update 2: So my internet is randomly working again today. The IP address I had before was a local one while the university address should start with 155... I didn't do anything to the settings...it's bizarre that it all of a sudden works. Thanks!

  Read the article

• Getting Selected Dropdown content to show in a form-generated email

  - by fmz

  I have a small contact form: <form method="post" action="contact.php" name="contactform" id="contactform"> <fieldset> <legend>Please fill in the following form to contact us</legend> <label for="name"><span class="required">*</span> Your Name</label> <input name="name" type="text" id="name" size="30" value="" /> <br /> <label for="company"><span class="required">*</span> Company</label> <input name="company" type="text" id="name" size="30" value="" /> <br /> <label for="email"><span class="required">*</span> Email</label> <input name="email" type="text" id="email" size="30" value="" /> <br /> <label for="phone"><span class="required">*</span> Phone</label> <input name="phone" type="text" id="phone" size="30" value="" /> <br /> <label for="purpose"><span class="required">*</span> Purpose</label> <select id="purpose" style="width: 300px; height:35px;"> <option value="I am interested in your services">I am interested in your services!</option> <option value="I am interested in a partnership">I am interested in a partnership!</option> <option value="I am interested in a job">I am interested in a job!</option> </select> <br /> <label for=comments><span class="required">*</span> Comments</label> <textarea name="comments" cols="40" rows="3" id="comments" style="width: 350px;"></textarea> <p><span class="required">*</span> Please help us control spam.</p> <label for=verify accesskey=V>&nbsp;&nbsp;&nbsp;3 + 1 =</label> <input name="verify" type="text" id="verify" size="4" value="" style="width: 30px;" /><br /><br /> <input type="submit" class="submit" id="submit" value="Submit" /> </fieldset> </form> I want to send the results of the form in a php generated email. Everything is coming through except the selected contents of the "purpose" drop down. Here is the PHP: <?php if(!$_POST) exit; $name = $_POST['name']; $company = $_POST['company']; $email = $_POST['email']; $phone = $_POST['phone']; $purpose = $_POST['purpose']; $comments = $_POST['comments']; $verify = $_POST['verify']; if(trim($name) == '') { echo '<div class="error_message">Attention! You must enter your name.</div>'; exit(); } else if(trim($company) == '') { echo '<div class="error_message">Attention! Please enter your company name.</div>'; exit(); } else if(trim($email) == '') { echo '<div class="error_message">Attention! Please enter a valid email address.</div>'; exit(); } else if(trim($phone) == '') { echo '<div class="error_message">Attention! Please enter a valid phone number.</div>'; exit(); } else if(!isEmail($email)) { echo '<div class="error_message">Attention! You have enter an invalid e-mail address, try again.</div>'; exit(); } if(trim($comments) == '') { echo '<div class="error_message">Attention! Please enter your message.</div>'; exit(); } else if(trim($verify) == '') { echo '<div class="error_message">Attention! Please enter the verification number.</div>'; exit(); } else if(trim($verify) != '4') { echo '<div class="error_message">Attention! The verification number you entered is incorrect.</div>'; exit(); } if($error == '') { if(get_magic_quotes_gpc()) { $comments = stripslashes($comments); } // Configuration option. // Enter the email address that you want to emails to be sent to. // Example $address = "[email protected]"; $address = "[email protected]"; // Configuration option. // i.e. The standard subject will appear as, "You've been contacted by John Doe." // Example, $e_subject = '$name . ' has contacted you via Your Website.'; $e_subject = 'You\'ve been contacted by ' . $name . '.'; // Configuration option. // You can change this if you feel that you need to. // Developers, you may wish to add more fields to the form, in which case you must be sure to add them here. $e_body = "You have been contacted by $name.\r\n\n"; $e_content = "Comments: \"$comments\"\r\n\n"; $e_company = "Company: $company\r\n\n"; $e_purpose = "Reason for contact: $purpose\r\n"; $e_reply = "You can contact $name via email, $email or via phone $phone"; $msg = $e_body . $e_content . $e_company . $e_purpose . $e_reply; if(mail($address, $e_subject, $msg, "From: $email\r\nReply-To: $email\r\nReturn-Path: $email\r\n")) { // Email has sent successfully, echo a success page. echo "<fieldset>"; echo "<div id='success_page'>"; echo "<h1>Email Sent Successfully.</h1>"; echo "<p>Thank you <strong>$name</strong>, your message has been submitted to us.</p>"; echo "</div>"; echo "</fieldset>"; } else { echo 'ERROR!'; } } function isEmail($email) { // Email address verification, do not edit. return(preg_match("/^[-_.[:alnum:]]+@((([[:alnum:]]|[[:alnum:]][[:alnum:]-]*[[:alnum:]])\.)+(ad|ae|aero|af|ag|ai|al|am|an|ao|aq|ar|arpa|as|at|au|aw|az|ba|bb|bd|be|bf|bg|bh|bi|biz|bj|bm|bn|bo|br|bs|bt|bv|bw|by|bz|ca|cc|cd|cf|cg|ch|ci|ck|cl|cm|cn|co|com|coop|cr|cs|cu|cv|cx|cy|cz|de|dj|dk|dm|do|dz|ec|edu|ee|eg|eh|er|es|et|eu|fi|fj|fk|fm|fo|fr|ga|gb|gd|ge|gf|gh|gi|gl|gm|gn|gov|gp|gq|gr|gs|gt|gu|gw|gy|hk|hm|hn|hr|ht|hu|id|ie|il|in|info|int|io|iq|ir|is|it|jm|jo|jp|ke|kg|kh|ki|km|kn|kp|kr|kw|ky|kz|la|lb|lc|li|lk|lr|ls|lt|lu|lv|ly|ma|mc|md|mg|mh|mil|mk|ml|mm|mn|mo|mp|mq|mr|ms|mt|mu|museum|mv|mw|mx|my|mz|na|name|nc|ne|net|nf|ng|ni|nl|no|np|nr|nt|nu|nz|om|org|pa|pe|pf|pg|ph|pk|pl|pm|pn|pr|pro|ps|pt|pw|py|qa|re|ro|ru|rw|sa|sb|sc|sd|se|sg|sh|si|sj|sk|sl|sm|sn|so|sr|st|su|sv|sy|sz|tc|td|tf|tg|th|tj|tk|tm|tn|to|tp|tr|tt|tv|tw|tz|ua|ug|uk|um|us|uy|uz|va|vc|ve|vg|vi|vn|vu|wf|ws|ye|yt|yu|za|zm|zw)$|(([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5])\.){3}([0-9][0-9]?|[0-1][0-9][0-9]|[2][0-4][0-9]|[2][5][0-5]))$/i",$email)); } ?> What am I missing? Thanks.

  Read the article

• Too many sleeping processes?

  - by user55859

  I'm running Debian Lenny (x86_64) on a cloud VPS (Xen) and top command tells me there are 210 processes running and 209 are sleeping: top - 14:49:29 up 15:18, 1 user, load average: 0.09, 0.11, 0.05 Tasks: 210 total, 1 running, 209 sleeping, 0 stopped, 0 zombie Cpu(s): 0.0%us, 0.0%sy, 0.0%ni,100.0%id, 0.0%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 532288k total, 437316k used, 94972k free, 30584k buffers Swap: 1048568k total, 408k used, 1048160k free, 219772k cached And here is what ps aux command gives me: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.1 10380 812 ? Ss Sep30 0:00 init [2] root 2 0.0 0.0 0 0 ? S< Sep30 0:00 [kthreadd] root 3 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/0] root 4 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/0] root 5 0.0 0.0 0 0 ? S< Sep30 0:00 [events/0] root 6 0.0 0.0 0 0 ? S< Sep30 0:00 [khelper] root 7 0.0 0.0 0 0 ? S< Sep30 0:05 [xenwatch] root 8 0.0 0.0 0 0 ? S< Sep30 0:13 [xenbus] root 10 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/1] root 11 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/1] root 12 0.0 0.0 0 0 ? S< Sep30 0:00 [events/1] root 13 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/2] root 14 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/2] root 15 0.0 0.0 0 0 ? S< Sep30 0:00 [events/2] root 16 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/3] root 17 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/3] root 18 0.0 0.0 0 0 ? S< Sep30 0:00 [events/3] root 19 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/4] root 20 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/4] root 21 0.0 0.0 0 0 ? S< Sep30 0:00 [events/4] root 22 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/5] root 23 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/5] root 24 0.0 0.0 0 0 ? S< Sep30 0:00 [events/5] root 25 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/6] root 26 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/6] root 27 0.0 0.0 0 0 ? S< Sep30 0:00 [events/6] root 28 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/7] root 29 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/7] root 30 0.0 0.0 0 0 ? S< Sep30 0:00 [events/7] root 31 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/8] root 32 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/8] root 33 0.0 0.0 0 0 ? S< Sep30 0:00 [events/8] root 34 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/9] root 35 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/9] root 36 0.0 0.0 0 0 ? S< Sep30 0:00 [events/9] root 37 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/10] root 38 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/10] root 39 0.0 0.0 0 0 ? S< Sep30 0:04 [events/10] root 40 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/11] root 41 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/11] root 42 0.0 0.0 0 0 ? S< Sep30 0:00 [events/11] root 43 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/12] root 44 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/12] root 45 0.0 0.0 0 0 ? S< Sep30 0:00 [events/12] root 46 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/13] root 47 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/13] root 48 0.0 0.0 0 0 ? S< Sep30 0:00 [events/13] root 49 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/14] root 50 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/14] root 51 0.0 0.0 0 0 ? S< Sep30 0:00 [events/14] root 52 0.0 0.0 0 0 ? S< Sep30 0:00 [migration/15] root 53 0.0 0.0 0 0 ? S< Sep30 0:00 [ksoftirqd/15] root 54 0.0 0.0 0 0 ? S< Sep30 0:00 [events/15] root 55 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/0] root 56 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/1] root 57 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/2] root 58 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/3] root 59 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/4] root 60 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/5] root 61 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/6] root 62 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/7] root 63 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/8] root 64 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/9] root 65 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/10] root 66 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/11] root 67 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/12] root 68 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/13] root 69 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/14] root 70 0.0 0.0 0 0 ? S< Sep30 0:00 [kintegrityd/15] root 71 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/0] root 72 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/1] root 73 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/2] root 74 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/3] root 75 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/4] root 76 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/5] root 77 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/6] root 78 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/7] root 79 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/8] root 80 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/9] root 81 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/10] root 82 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/11] root 83 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/12] root 84 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/13] root 85 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/14] root 86 0.0 0.0 0 0 ? S< Sep30 0:00 [kblockd/15] root 87 0.0 0.0 0 0 ? S< Sep30 0:00 [cqueue] root 88 0.0 0.0 0 0 ? S< Sep30 0:00 [kseriod] root 89 0.0 0.0 0 0 ? S Sep30 0:00 [pdflush] root 90 0.0 0.0 0 0 ? S Sep30 0:00 [pdflush] root 91 0.0 0.0 0 0 ? S< Sep30 0:00 [kswapd0] root 92 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/0] root 93 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/1] root 94 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/2] root 95 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/3] root 96 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/4] root 97 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/5] root 98 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/6] root 99 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/7] root 100 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/8] root 101 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/9] root 102 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/10] root 103 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/11] root 104 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/12] root 105 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/13] root 106 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/14] root 107 0.0 0.0 0 0 ? S< Sep30 0:00 [aio/15] root 108 0.0 0.0 0 0 ? S< Sep30 0:00 [kpsmoused] root 167 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/0] root 168 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/1] root 169 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/2] root 170 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/3] root 171 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/4] root 172 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/5] root 173 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/6] root 174 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/7] root 175 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/8] root 176 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/9] root 177 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/10] root 178 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/11] root 179 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/12] root 180 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/13] root 181 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/14] root 182 0.0 0.0 0 0 ? S< Sep30 0:00 [net_accel/15] root 315 0.0 0.0 0 0 ? S< Sep30 0:00 [xfs_mru_cache] root 316 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/0] root 317 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/1] root 318 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/2] root 319 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/3] root 320 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/4] root 321 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/5] root 322 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/6] root 323 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/7] root 324 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/8] root 325 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/9] root 326 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/10] root 327 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/11] root 328 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/12] root 329 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/13] root 330 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/14] root 331 0.0 0.0 0 0 ? S< Sep30 0:00 [xfslogd/15] root 332 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/0] root 333 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/1] root 334 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/2] root 335 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/3] root 336 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/4] root 337 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/5] root 338 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/6] root 339 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/7] root 340 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/8] root 341 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/9] root 342 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/10] root 343 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/11] root 344 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/12] root 345 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/13] root 346 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/14] root 347 0.0 0.0 0 0 ? S< Sep30 0:00 [xfsdatad/15] root 399 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsIO] root 400 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 401 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 402 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 403 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 404 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 405 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 406 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 407 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 408 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 409 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 410 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 411 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 412 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 413 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 414 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 415 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsCommit] root 416 0.0 0.0 0 0 ? S< Sep30 0:00 [jfsSync] root 673 0.0 0.0 0 0 ? S< Sep30 0:00 [kjournald] root 727 0.0 0.1 16840 960 ? S<s Sep30 0:00 udevd --daemon root 1273 0.0 0.3 122036 2016 ? Sl Sep30 0:00 /usr/sbin/rsyslogd -c3 root 1306 0.0 0.2 48960 1224 ? Ss Sep30 0:00 /usr/sbin/sshd root 1809 0.0 0.2 21276 1076 ? Ss Sep30 0:00 /usr/sbin/cron root 1873 0.0 1.5 41460 8360 ? Ss Sep30 0:02 /usr/sbin/munin-node root 1896 0.0 0.1 3864 608 tty1 Ss+ Sep30 0:00 /sbin/getty 38400 tty1 root 1897 0.0 0.1 3864 604 tty2 Ss+ Sep30 0:00 /sbin/getty 38400 tty2 root 1898 0.0 0.1 3864 604 tty3 Ss+ Sep30 0:00 /sbin/getty 38400 tty3 root 1899 0.0 0.1 3864 608 tty4 Ss+ Sep30 0:00 /sbin/getty 38400 tty4 root 1900 0.0 0.1 3864 608 tty5 Ss+ Sep30 0:00 /sbin/getty 38400 tty5 root 1901 0.0 0.1 3864 604 tty6 Ss+ Sep30 0:00 /sbin/getty 38400 tty6 101 4526 0.0 0.1 42820 1052 ? Ss 12:27 0:00 /usr/sbin/exim4 -bd -q30m root 8865 0.0 0.2 11668 1432 pts/0 S 13:18 0:00 /bin/sh /usr/bin/mysqld_safe mysql 8980 0.0 9.0 175284 48368 pts/0 Sl 13:18 0:05 /usr/sbin/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/my root 8981 0.0 0.1 6480 684 pts/0 S 13:18 0:00 logger -t mysqld -p daemon.error root 13730 0.0 0.8 149144 4712 ? Ss 14:05 0:00 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13731 0.2 11.4 172756 61136 ? S 14:05 0:05 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13732 0.2 8.9 158516 47712 ? S 14:05 0:05 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf www-data 13733 0.1 8.1 156576 43468 ? S 14:05 0:04 /usr/bin/php5-fpm --fpm-config /etc/php5/fpm/php5-fpm.conf root 14601 0.0 0.2 30600 1240 ? Ss 14:15 0:00 nginx: master process /usr/sbin/nginx www-data 14602 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14603 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14604 0.0 0.5 31552 2852 ? S 14:15 0:00 nginx: worker process www-data 14605 0.0 0.4 31240 2580 ? S 14:15 0:00 nginx: worker process www-data 14606 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14607 0.0 0.3 30976 1836 ? S 14:15 0:00 nginx: worker process www-data 14608 0.0 0.4 31244 2536 ? S 14:15 0:00 nginx: worker process www-data 14609 0.0 0.5 31544 2788 ? S 14:15 0:00 nginx: worker process root 17169 0.0 0.2 17456 1160 pts/0 R+ 14:45 0:00 ps aux root 26391 0.0 0.6 66168 3284 ? Ss 10:32 0:00 sshd: root@notty root 26394 0.0 0.3 42376 2120 ? Ss 10:32 0:00 /usr/lib/openssh/sftp-server root 31500 0.0 0.6 66140 3248 ? Ss 11:33 0:00 sshd: root@pts/0 root 31503 0.0 0.3 20248 1924 pts/0 Ss 11:33 0:00 -bash root 31509 0.0 0.6 66168 3264 ? Ss 11:34 0:00 sshd: root@notty root 31512 0.0 0.3 42180 1984 ? Ss 11:34 0:00 /usr/lib/openssh/sftp-server I'm wondering if this is normal situation? Do I need all of those process? Thanks for any suggestions!

  Read the article

• High Linux loads on low CPU/memory usage

  - by user13323

  Hi. I have quite strange situation, where my CentOS 5.5 box loads are high, but the CPU and memory used are pretty low: top - 20:41:38 up 42 days, 6:14, 2 users, load average: 19.79, 21.25, 18.87 Tasks: 254 total, 1 running, 253 sleeping, 0 stopped, 0 zombie Cpu(s): 3.8%us, 0.3%sy, 0.1%ni, 95.0%id, 0.6%wa, 0.0%hi, 0.1%si, 0.0%st Mem: 4035284k total, 4008084k used, 27200k free, 38748k buffers Swap: 4208928k total, 242576k used, 3966352k free, 1465008k cached free -mt total used free shared buffers cached Mem: 3940 3910 29 0 37 1427 -/+ buffers/cache: 2445 1495 Swap: 4110 236 3873 Total: 8050 4147 3903 Iostat also shows good results: avg-cpu: %user %nice %system %iowait %steal %idle 3.83 0.13 0.41 0.58 0.00 95.05 Here is the ps aux output: USER PID %CPU %MEM VSZ RSS TTY STAT START TIME COMMAND root 1 0.0 0.0 10348 80 ? Ss 2010 2:11 init [3] root 2 0.0 0.0 0 0 ? S< 2010 0:00 [migration/0] root 3 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/0] root 4 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/0] root 5 0.0 0.0 0 0 ? S< 2010 0:02 [migration/1] root 6 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/1] root 7 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/1] root 8 0.0 0.0 0 0 ? S< 2010 0:02 [migration/2] root 9 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/2] root 10 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/2] root 11 0.0 0.0 0 0 ? S< 2010 0:02 [migration/3] root 12 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/3] root 13 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/3] root 14 0.0 0.0 0 0 ? S< 2010 0:03 [migration/4] root 15 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/4] root 16 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/4] root 17 0.0 0.0 0 0 ? S< 2010 0:01 [migration/5] root 18 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/5] root 19 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/5] root 20 0.0 0.0 0 0 ? S< 2010 0:11 [migration/6] root 21 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/6] root 22 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/6] root 23 0.0 0.0 0 0 ? S< 2010 0:01 [migration/7] root 24 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/7] root 25 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/7] root 26 0.0 0.0 0 0 ? S< 2010 0:00 [migration/8] root 27 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/8] root 28 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/8] root 29 0.0 0.0 0 0 ? S< 2010 0:00 [migration/9] root 30 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/9] root 31 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/9] root 32 0.0 0.0 0 0 ? S< 2010 0:08 [migration/10] root 33 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/10] root 34 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/10] root 35 0.0 0.0 0 0 ? S< 2010 0:05 [migration/11] root 36 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/11] root 37 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/11] root 38 0.0 0.0 0 0 ? S< 2010 0:02 [migration/12] root 39 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/12] root 40 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/12] root 41 0.0 0.0 0 0 ? S< 2010 0:14 [migration/13] root 42 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/13] root 43 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/13] root 44 0.0 0.0 0 0 ? S< 2010 0:04 [migration/14] root 45 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/14] root 46 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/14] root 47 0.0 0.0 0 0 ? S< 2010 0:01 [migration/15] root 48 0.0 0.0 0 0 ? SN 2010 0:00 [ksoftirqd/15] root 49 0.0 0.0 0 0 ? S< 2010 0:00 [watchdog/15] root 50 0.0 0.0 0 0 ? S< 2010 0:00 [events/0] root 51 0.0 0.0 0 0 ? S< 2010 0:00 [events/1] root 52 0.0 0.0 0 0 ? S< 2010 0:00 [events/2] root 53 0.0 0.0 0 0 ? S< 2010 0:00 [events/3] root 54 0.0 0.0 0 0 ? S< 2010 0:00 [events/4] root 55 0.0 0.0 0 0 ? S< 2010 0:00 [events/5] root 56 0.0 0.0 0 0 ? S< 2010 0:00 [events/6] root 57 0.0 0.0 0 0 ? S< 2010 0:00 [events/7] root 58 0.0 0.0 0 0 ? S< 2010 0:00 [events/8] root 59 0.0 0.0 0 0 ? S< 2010 0:00 [events/9] root 60 0.0 0.0 0 0 ? S< 2010 0:00 [events/10] root 61 0.0 0.0 0 0 ? S< 2010 0:00 [events/11] root 62 0.0 0.0 0 0 ? S< 2010 0:00 [events/12] root 63 0.0 0.0 0 0 ? S< 2010 0:00 [events/13] root 64 0.0 0.0 0 0 ? S< 2010 0:00 [events/14] root 65 0.0 0.0 0 0 ? S< 2010 0:00 [events/15] root 66 0.0 0.0 0 0 ? S< 2010 0:00 [khelper] root 107 0.0 0.0 0 0 ? S< 2010 0:00 [kthread] root 126 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/0] root 127 0.0 0.0 0 0 ? S< 2010 0:03 [kblockd/1] root 128 0.0 0.0 0 0 ? S< 2010 0:01 [kblockd/2] root 129 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/3] root 130 0.0 0.0 0 0 ? S< 2010 0:05 [kblockd/4] root 131 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/5] root 132 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/6] root 133 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/7] root 134 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/8] root 135 0.0 0.0 0 0 ? S< 2010 0:02 [kblockd/9] root 136 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/10] root 137 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/11] root 138 0.0 0.0 0 0 ? S< 2010 0:04 [kblockd/12] root 139 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/13] root 140 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/14] root 141 0.0 0.0 0 0 ? S< 2010 0:00 [kblockd/15] root 142 0.0 0.0 0 0 ? S< 2010 0:00 [kacpid] root 281 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/0] root 282 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/1] root 283 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/2] root 284 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/3] root 285 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/4] root 286 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/5] root 287 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/6] root 288 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/7] root 289 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/8] root 290 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/9] root 291 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/10] root 292 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/11] root 293 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/12] root 294 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/13] root 295 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/14] root 296 0.0 0.0 0 0 ? S< 2010 0:00 [cqueue/15] root 299 0.0 0.0 0 0 ? S< 2010 0:00 [khubd] root 301 0.0 0.0 0 0 ? S< 2010 0:00 [kseriod] root 490 0.0 0.0 0 0 ? S 2010 0:00 [khungtaskd] root 493 0.1 0.0 0 0 ? S< 2010 94:48 [kswapd1] root 494 0.0 0.0 0 0 ? S< 2010 0:00 [aio/0] root 495 0.0 0.0 0 0 ? S< 2010 0:00 [aio/1] root 496 0.0 0.0 0 0 ? S< 2010 0:00 [aio/2] root 497 0.0 0.0 0 0 ? S< 2010 0:00 [aio/3] root 498 0.0 0.0 0 0 ? S< 2010 0:00 [aio/4] root 499 0.0 0.0 0 0 ? S< 2010 0:00 [aio/5] root 500 0.0 0.0 0 0 ? S< 2010 0:00 [aio/6] root 501 0.0 0.0 0 0 ? S< 2010 0:00 [aio/7] root 502 0.0 0.0 0 0 ? S< 2010 0:00 [aio/8] root 503 0.0 0.0 0 0 ? S< 2010 0:00 [aio/9] root 504 0.0 0.0 0 0 ? S< 2010 0:00 [aio/10] root 505 0.0 0.0 0 0 ? S< 2010 0:00 [aio/11] root 506 0.0 0.0 0 0 ? S< 2010 0:00 [aio/12] root 507 0.0 0.0 0 0 ? S< 2010 0:00 [aio/13] root 508 0.0 0.0 0 0 ? S< 2010 0:00 [aio/14] root 509 0.0 0.0 0 0 ? S< 2010 0:00 [aio/15] root 665 0.0 0.0 0 0 ? S< 2010 0:00 [kpsmoused] root 808 0.0 0.0 0 0 ? S< 2010 0:00 [ata/0] root 809 0.0 0.0 0 0 ? S< 2010 0:00 [ata/1] root 810 0.0 0.0 0 0 ? S< 2010 0:00 [ata/2] root 811 0.0 0.0 0 0 ? S< 2010 0:00 [ata/3] root 812 0.0 0.0 0 0 ? S< 2010 0:00 [ata/4] root 813 0.0 0.0 0 0 ? S< 2010 0:00 [ata/5] root 814 0.0 0.0 0 0 ? S< 2010 0:00 [ata/6] root 815 0.0 0.0 0 0 ? S< 2010 0:00 [ata/7] root 816 0.0 0.0 0 0 ? S< 2010 0:00 [ata/8] root 817 0.0 0.0 0 0 ? S< 2010 0:00 [ata/9] root 818 0.0 0.0 0 0 ? S< 2010 0:00 [ata/10] root 819 0.0 0.0 0 0 ? S< 2010 0:00 [ata/11] root 820 0.0 0.0 0 0 ? S< 2010 0:00 [ata/12] root 821 0.0 0.0 0 0 ? S< 2010 0:00 [ata/13] root 822 0.0 0.0 0 0 ? S< 2010 0:00 [ata/14] root 823 0.0 0.0 0 0 ? S< 2010 0:00 [ata/15] root 824 0.0 0.0 0 0 ? S< 2010 0:00 [ata_aux] root 842 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_0] root 843 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_1] root 844 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_2] root 845 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_3] root 846 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_4] root 847 0.0 0.0 0 0 ? S< 2010 0:00 [scsi_eh_5] root 882 0.0 0.0 0 0 ? S< 2010 0:00 [kstriped] root 951 0.0 0.0 0 0 ? S< 2010 4:24 [kjournald] root 976 0.0 0.0 0 0 ? S< 2010 0:00 [kauditd] postfix 990 0.0 0.0 54208 2284 ? S 21:19 0:00 pickup -l -t fifo -u root 1013 0.0 0.0 12676 8 ? S<s 2010 0:00 /sbin/udevd -d root 1326 0.0 0.0 90900 3400 ? Ss 14:53 0:00 sshd: root@notty root 1410 0.0 0.0 53972 2108 ? Ss 14:53 0:00 /usr/libexec/openssh/sftp-server root 2690 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/0] root 2691 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/1] root 2692 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/2] root 2693 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/3] root 2694 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/4] root 2695 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/5] root 2696 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/6] root 2697 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/7] root 2698 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/8] root 2699 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/9] root 2700 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/10] root 2701 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/11] root 2702 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/12] root 2703 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/13] root 2704 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/14] root 2705 0.0 0.0 0 0 ? S< 2010 0:00 [kmpathd/15] root 2706 0.0 0.0 0 0 ? S< 2010 0:00 [kmpath_handlerd] root 2755 0.0 0.0 0 0 ? S< 2010 4:35 [kjournald] root 2757 0.0 0.0 0 0 ? S< 2010 3:38 [kjournald] root 2759 0.0 0.0 0 0 ? S< 2010 4:10 [kjournald] root 2761 0.0 0.0 0 0 ? S< 2010 4:26 [kjournald] root 2763 0.0 0.0 0 0 ? S< 2010 3:15 [kjournald] root 2765 0.0 0.0 0 0 ? S< 2010 3:04 [kjournald] root 2767 0.0 0.0 0 0 ? S< 2010 3:02 [kjournald] root 2769 0.0 0.0 0 0 ? S< 2010 2:58 [kjournald] root 2771 0.0 0.0 0 0 ? S< 2010 0:00 [kjournald] root 3340 0.0 0.0 5908 356 ? Ss 2010 2:48 syslogd -m 0 root 3343 0.0 0.0 3804 212 ? Ss 2010 0:03 klogd -x root 3430 0.0 0.0 0 0 ? S< 2010 0:50 [kondemand/0] root 3431 0.0 0.0 0 0 ? S< 2010 0:54 [kondemand/1] root 3432 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/2] root 3433 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/3] root 3434 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/4] root 3435 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/5] root 3436 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/6] root 3437 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/7] root 3438 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/8] root 3439 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/9] root 3440 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/10] root 3441 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/11] root 3442 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/12] root 3443 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/13] root 3444 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/14] root 3445 0.0 0.0 0 0 ? S< 2010 0:00 [kondemand/15] root 3461 0.0 0.0 10760 284 ? Ss 2010 3:44 irqbalance rpc 3481 0.0 0.0 8052 4 ? Ss 2010 0:00 portmap root 3526 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/0] root 3527 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/1] root 3528 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/2] root 3529 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/3] root 3530 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/4] root 3531 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/5] root 3532 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/6] root 3533 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/7] root 3534 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/8] root 3535 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/9] root 3536 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/10] root 3537 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/11] root 3538 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/12] root 3539 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/13] root 3540 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/14] root 3541 0.0 0.0 0 0 ? S< 2010 0:00 [rpciod/15] root 3563 0.0 0.0 10160 8 ? Ss 2010 0:00 rpc.statd root 3595 0.0 0.0 55180 4 ? Ss 2010 0:00 rpc.idmapd dbus 3618 0.0 0.0 21256 28 ? Ss 2010 0:00 dbus-daemon --system root 3649 0.2 0.4 563084 18796 ? S<sl 2010 179:03 mfsmount /mnt/mfs -o rw,mfsmaster=web1.ovs.local root 3702 0.0 0.0 3800 8 ? Ss 2010 0:00 /usr/sbin/acpid 68 3715 0.0 0.0 31312 816 ? Ss 2010 3:14 hald root 3716 0.0 0.0 21692 28 ? S 2010 0:00 hald-runner 68 3726 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-acpi: listening on acpid socket /var/run/acpid.socket 68 3730 0.0 0.0 12324 8 ? S 2010 0:00 hald-addon-keyboard: listening on /dev/input/event0 root 3773 0.0 0.0 62608 332 ? Ss 2010 0:00 /usr/sbin/sshd ganglia 3786 0.0 0.0 24704 988 ? Ss 2010 14:26 /usr/sbin/gmond root 3843 0.0 0.0 54144 300 ? Ss 2010 1:49 /usr/libexec/postfix/master postfix 3855 0.0 0.0 54860 1060 ? S 2010 0:22 qmgr -l -t fifo -u root 3877 0.0 0.0 74828 708 ? Ss 2010 1:15 crond root 3891 1.4 1.9 326960 77704 ? S<l 2010 896:59 mfschunkserver root 4122 0.0 0.0 18732 176 ? Ss 2010 0:10 /usr/sbin/atd root 4193 0.0 0.8 129180 35984 ? Ssl 2010 11:04 /usr/bin/ruby /usr/sbin/puppetd root 4223 0.0 0.0 18416 172 ? S 2010 0:10 /usr/sbin/smartd -q never root 4227 0.0 0.0 3792 8 tty1 Ss+ 2010 0:00 /sbin/mingetty tty1 root 4230 0.0 0.0 3792 8 tty2 Ss+ 2010 0:00 /sbin/mingetty tty2 root 4231 0.0 0.0 3792 8 tty3 Ss+ 2010 0:00 /sbin/mingetty tty3 root 4233 0.0 0.0 3792 8 tty4 Ss+ 2010 0:00 /sbin/mingetty tty4 root 4234 0.0 0.0 3792 8 tty5 Ss+ 2010 0:00 /sbin/mingetty tty5 root 4236 0.0 0.0 3792 8 tty6 Ss+ 2010 0:00 /sbin/mingetty tty6 root 5596 0.0 0.0 19368 20 ? Ss 2010 0:00 DarwinStreamingServer qtss 5597 0.8 0.9 166572 37408 ? Sl 2010 523:02 DarwinStreamingServer root 8714 0.0 0.0 0 0 ? S Jan31 0:33 [pdflush] root 9914 0.0 0.0 65612 968 pts/1 R+ 21:49 0:00 ps aux root 10765 0.0 0.0 76792 1080 ? Ss Jan24 0:58 SCREEN root 10766 0.0 0.0 66212 872 pts/3 Ss Jan24 0:00 /bin/bash root 11833 0.0 0.0 63852 1060 pts/3 S+ 17:17 0:00 /bin/sh ./launch.sh root 11834 437 42.9 4126884 1733348 pts/3 Sl+ 17:17 1190:50 /usr/bin/java -Xms128m -Xmx512m -XX:+UseConcMarkSweepGC -jar /JavaCore/JavaCore.jar root 13127 4.7 1.1 110564 46876 ? Ssl 17:18 12:55 /JavaCore/fetcher.bin root 19392 0.0 0.0 90108 3336 ? Rs 20:35 0:00 sshd: root@pts/1 root 19401 0.0 0.0 66216 1640 pts/1 Ss 20:35 0:00 -bash root 20567 0.0 0.0 90108 412 ? Ss Jan16 1:58 sshd: root@pts/0 root 20569 0.0 0.0 66084 912 pts/0 Ss Jan16 0:00 -bash root 21053 0.0 0.0 63856 28 ? S Jan30 0:00 /bin/sh /usr/bin/WowzaMediaServerd /usr/local/WowzaMediaServer/bin/setenv.sh /var/run/WowzaM root 21054 2.9 10.3 2252652 418468 ? Sl Jan30 314:25 java -Xmx1200M -server -Djava.net.preferIPv4Stack=true -Dcom.sun.management.jmxremote=true - root 21915 0.0 0.0 0 0 ? S Feb01 0:00 [pdflush] root 29996 0.0 0.0 76524 1004 pts/0 S+ 14:41 0:00 screen -x Any idea what could this be, or where I should look for more diagnostic information? Thanks.

  Read the article

< Previous Page | 5 6 7 8 9