Search Results

Search found 302 results on 13 pages for 'trash'.

Page 9/13 | < Previous Page | 5 6 7 8 9 10 11 12 13 | Next Page >

Terminal/Putty showing control characters (^M) after updating

- by jaycee48

I updated my system yesterday afternoon using the recommended updates from Update Manager. After it completed, I shutdown my system and went home for the day. I come in this morning and I am getting control characters displayed when using vi in both the standard terminal emulator, putty, and putty inside of my Windows virtual that I run with VirtualBox. I have made no other system changes and I cannot figure out how this occurred. It's as if every text file I have was created in DOS. I've searched the forums and I haven't found any answers. I am using xterm as my emulator and I checked with 3 of my coworkers and none of them are having this problem so we do not believe it is a server side issue. Especially since I've checked 3 different servers. There's nothing in my .profile other than PATH variables so I'm using the same terminal settings as everyone else. Some files are fine (I can open and read both /etc/environment and my .profile) but most of any kind of server generated log file is trash. Running cat or head on the same file displays the contents without the characters. Any ideas would be appreciated. Thanks.

Read the article
Installing Visual Studio 2010 SP1 or Windows Phone tools in your VM (danger!)

- by Jeff

If you've read my blog for any amount of time, you probably know that I tend to develop stuff in a Parallels VM on a Mac. It's how I roll. I like VM's because I can trash them and do really stupid things with beta software. That said, there is a pain point that doesn't seem that well documented when it comes to installing stuff in this scenario.The WP7 tools, and SP1 for Visual Studio 2010 (perhaps only if you already have the WP7 tools installed, I'm not sure), do something strange on install. As if it weren't already a long and slow installation, for reasons I don't understand, the installer fires up an instance of Windows Phone Emulator. As you may already know, the emulator doesn't run in a VM, because it is itself a VM, apparently. What it will do is fire up your CPU, make your comprooder hot and make the fans blow harder.I found this out accidentally, as I started the (slow) phone tool installation once, and walked away. An hour and a half later, I came back to find it hadn't finished. But it was hot and the CPU was pegged, so I fired up the task manager to find XDE.exe, the phone emulator, cranking away. I had to kill it several times, and eventually the install finished. It fired up just once in the SP1 install, but it still had the same hanging effect.I can't for the life of me figure out why it does this. In a VM, I can connect the phone to it and use that, so I don't need the emulator. But this install, firing up the emulator, will make it choke until you kill the XDE.exe process. Watch out!

Read the article
Why is my disk full?

- by Agmenor

I installed Ubuntu 12.04 by doing a fresh install where there was previously Ubuntu 11.10. My computer warns me now that my disk is nearly full. After having run apt-get purge, run apt-get autoremove and emptied the Trash can, I still have this problem as shown by this screenshot of Gparted: The disk /dev/sda7 is indeed full. I ran the Disk Usage Analyzer (Baobab) and I am still not sure of what is happening: One of my hypothesis is that when installing Ubuntu 12.04, I didn't configure my disks well and the disk /dev/sda6 is not mounted well as /home. Is this the reason indeed? What should I do to verify this and then to get the things fixed? Here are a few additional details to answer the questions I received (thank you everybody): My home directory is not encrypted. The Backup utility (Déjà Dup) is not set for automatic backups. (I do it myself and manually.) After I mount /dev/sda6, the command df -h gives Filesystem Size Used Avail Use% Mounted on /dev/sda7 244G 221G 12G 96% / udev 3,9G 4,0K 3,9G 1% /dev tmpfs 1,6G 904K 1,6G 1% /run none 5,0M 0 5,0M 0% /run/lock none 3,9G 164K 3,9G 1% /run/shm /dev/sda6 653G 189G 433G 31% /media/8ec2fa69-039b-4c52-ab1b-034d785132a1 (sorry but formatting this into code does not work, for an unknown reason) Thanks to izx's post, I realized /dev/sda6 was not even mounted before. It contains all the documents I used to have when I was running Ubuntu 11.10.

Read the article
Freeze on Boot WindowsXP

- by kyle

Ok first off I know I should have Windows 7 but i don't Its a really old computer and i'm not sure if it can run the latest OS of ubuntu but i'm trying any whay so here are my specs or what i could have gathered from the computer(viruses are every where and most of the drivers are gone) Specs OS WindowsXP(it isn't letting me know which one that is blocked) Graphics card(can't access device manger it is blocked also) graphics card is 2003-2004 era though ram 512mb last time i checked USB(Drivers Gone) Wireless Card(Drivers Gone) Lan Card(Drivers Gone) Audio(Drivers Gone) CD Drive (it runs and works but i can't check its properties that's blocked to) Computer Dell Inspiron 600m Good News I have the Driver CD for everything Bad News I Don't have the OS CD I know the Computer is trash but i want to flash it anyway and just install linux(ubuntu) The second problem is it doesn't even want to load the CD all the way it is just stuck at the Ubuntu Screen with all the bubbles orange and if i resart it just does it again. any help would be nice. EDIT: okay i tried the first comment and it said i need a firmware file from http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware the firmware is b43/ucode5.fw, b43-open/ucode5.fw is there any other way of installing this firmware without being in the Ubuntu because what I have read is I need to be in Ubuntu to do this... Thanks for all the help you are giving me i have read your comments but i don't want to wait another two hours downloading that if i can get it working on this...

Read the article
Shader compile log depending on hardware

- by dreta

I'm done with the core of my graphics engine and I'm testing it on every platform I can get my hands on. Now, what I noticed is that different drivers return different shader and program compile log content. For example, on my friend's laptop if you successfuly compile a shader then the log is simply empty. However on my PC I get some useful information along with it. So if I compile a vertex shader, I'll get: Vertex shader was successfully compiled to run on hardware. Which isn't that impressive, but is what happens when I compile a program. On my friend's computer the log is empty, since the program compiles. However on my own computer I get: Vertex shader(s) linked, fragment shader(s) linked. Which is awesome, because I'm attaching a geometry shader with 0 (I have a geometry shader file with trash, so it doesn't compile and the pointer is set to 0), and the compiler just tells me which shaders linked. Now it got me thinking, if I was going to buy a graphics card, is there a way for me to get the information about whether or not I'll get this "extended" compile information? Maybe it's vendor specific? Now I don't expect an answer TBH, this seems a bit obscure, but maybe somebody has any experience with this and could post it.

Read the article
Oneric Aspire One. After latest 11.10 update to Linux 3.0.0-9 boot hangs at staement "Starting Bluetooth"

- by hevh

I have today updated the version of Linux on Ubuntu on my Acer Aspire One. The boot hangs on the statement "Starting Bluetooth". Help please!! EDIT1: I get the grub menu when I start the netbook and it doesn´t matter which version of linux I choose the resulkt is the same. It gets as far as the Ubuntu spash screen then drops into command line mode then hangs on the line "Starting Bluetooth". I can log in and have tried various forms of the apt-get command to fix the system but with no result. I do not need bluetooth at the moment and so could remove the application if I knew how. (have tried apt-get remove bluez). When I use the command sudo apt-get -f install I get an error message saying "There's not enough space in /var/lib/mysql/" folowed by several other error messages. I have spent some time looking for similar problems and solutions using google but so far got to nothing to help. Thanks EDIT2: I have since discovered when running Knoppix or slitaz from a usb stick that the file managers report the hard disc as having no space. However GPARTED reports it as having 3.69gb. I do recall making space on the hard drive by deleting some old files and emptying trash whilst the update was running; perhaps its related. Any suggestions for how I can recover the apparently lost space from hard disc without losing the data. I have backups of the actual data but do not wnat to lose the applcations configuration. Thanks Kev

Read the article
Problem video nvidia ubuntu 12.04

- by dragonov7

I just did a fresh install of ubuntu 12.04 on my PC (Dell precision 370) but the video is not working as it should. Problems: When I log in to unity 3D I get a transparent bar (where the firefox, libre office, etc icons are) but I can see the tooltips when I put my mouse over where the icons are, I can see the top toolbar with no problem and I see just white on the rest of the desktop! When I log in using unity 2D I see the left bar cut in half (so I can't see the trash icon that is at the botton), the toolbar at the top shows OK and the desktop show OK but with some apps. For example, if I open a terminal and maximize it, it will only show just where the left toolbar "cuts". But if I open firefox it will open fine. Config: My PC comes with a nvidia quadro nvs 280 and I see that by default ubuntu is using the nouveau driver. Workarounds tried: I tried uninstalling the nouveau driver and the desktop works fine but I can use only unity 2D. I tried installing the nvidia-173 drivers using synaptic but I get "Could not apply changes! Fix broken packages first". I go to "Edit - Fix Broken packages" and I get the error: "E: Unable to correct problem, you have held broken packages.E: Error, PkgProblemResolver::Resolve generated breakes, this may be caused by held packages.E:Unable to correct dependencies" Output of lspci: 01:00.0 VGA compatible controller: NVIDIA Corporation NV37GL [Quadro PCI-E Series] (rev a2) Any idea so as to what I should do? Thanks in advance for any help. PS: Ah, the nvidia-173 driver was working fine on ubuntu 10.04.

Read the article
link_to syntax with rails3 (link_to_remote) and basic javascript not working in a rails3 app?

- by z3cko

i am wondering if the basic link_to syntax is completely broken in current rails3 master or if i am doing some wrong syntax here. = link_to "name", nil, :onlick => "alert('Hello world!');" should actually produce an alert on click. very simple. does not work on my rails3 project! (also no error output!) any ideas? for the general link_to syntax i could not find an example where i could combine a link_to_remote with a confirmation, remote and html class (see my try below) = link_to "delete", {:action => "destroy", :remote => true, :method => :delete, :confirm => "#{a.title} wirklich Löschen?" }, :class => "trash" even the rails3 api does not help me here: http://rails3api.s3.amazonaws.com/index.html help!

Read the article
rails3 link_to :with attribute?

- by z3cko

i am wondering if the :with attribute is removed from rails3 since i cannot find anything in the rails3 api - http://rails3api.s3.amazonaws.com anyone has a clue or give a hint on how to use the :with parameter to send data with a link_to non-working example: = link_to "Foo", {:action => "filter", :filter => "filter1",:with => "'test='+$('search').value"}, :remote => true, :class => "trash unselected", :id => "boo" thanks!

Read the article
How do you uninstall old custom installs of Xcode?

- by Jonathan

Hi, When I install a beta, I do a custom install into a separate folder to the latest release version. I have several old beta installs. How do I uninstall the old custom versions of xcode? Can I just trash the folder? Our do I need to use Terminal? The release notes suggest to use this: $ sudo /Library/uninstall-devtools --mode=all But will this just uninstall my original official release version 3.2? Thanks.

Read the article
How to pass jQuery variable with AJAX to PHP page

- by Walden

Trying to pass the variable "flickrurl" to a PHP page with jQuery/ajax. It works when using a plain text string and not the variable. Am I assigning the variable properly? see the full code in action here: http://is.gd/c9ytI $trash.droppable({ accept: '#gallery > li', activeClass: 'ui-state-highlight', drop: function(ev, ui) { deleteImage(ui.draggable); //set variable equal to src of image tag in #gallery > li var $flickrurl = $item.find('img').attr("src"); //pass variable to php page $.post("updateDB.php", $flickrurl ); } });

Read the article
Screen capture of MDI app with OpenGL graphics using MFC

- by NPVN

In our MDI application - which is written in MFC - we have a function to save a screenshot of the MDI client area to file. We are currently doing a BitBlt from the screen into a bitmap, which is then saved. The problem is that some of the MDI child windows have their content rendered by OpenGL, and in the destination bitmap these areas show up as blank or garbled. I have considered some alternatives: - Extract the OpenGL content directly (using glReadPixels), and draw this to the relevant portions of the screen bitmap. - Simulate an ALT+PrtScr, since doing this manually seems to get the content just fine. This will trash the clipboard content, though. - Try working with the DWM. Appart from Vista and Win7, this also needs to work on Win2000 and XP, so this probably isn't the way to go. Any input will be appreciated!

Read the article
Making the #include square

- by David

I'm trying to write a makefile using CC on Solaris 10. [Only the first bit of that really matters, I think]. I have the following rule for foo.o: foo.o: foo.cc common_dependencies.h CC -c foo.cc -I../../common Unfortunately, common_dependencies.h includes all sorts of idiosyncratic trash, in directories not named '.' or '../../common' . Is this just going to have to be a brute force makefile where I ferret out all of the dependency paths? All of the dependencies are somewhere under '../..', but sometimes 1-level down and sometimes 2-levels down.

Read the article
Linux - File was deleted and then reappeared when folder was zipped

- by davee9

Hello, I am using Backtrack 4 Final, which is a Linux distro that is Ubuntu based. I had a directory that contained around 5 files. I deleted one of the files, which sent it to the trash. I then zipped the directory up (now containing 4 files), using this command: zip -r directory.zip directory/ When I then unzipped directory.zip, the file I deleted was in there again. I couldn't believe this, so I zipped up the directory again, and the file reappeared again but this time could not be opened because the operating system said it didn't exist or something. I don't remember the exact error, and I cannot make this happen again. Would anyone happen to know why a file that was deleted from a directory would reappear in that directory after it was zipped up? Thank you.

Read the article
MSSQL: Primary Key Schema Largely Guid but Sometimes Integer Types...

- by Code Sherpa

OK, this may be a silly question but... I have inherited a project and am tasked with going over the primary key relationships. The project largely uses Guids. I say "largely" because there are examples where tables use integral types to reflect enumerations. For example, dbo.MessageFolder has MessageFolderId of type int to reflect public emum MessageFolderTypes { inbox = 1, sent = 2, trash = 3, etc... } This happens a lot. There are tables with primary keys of type int which is unavoidable because of their reliance on enumerations and tables with primary keys of type Guid which reflect the primary key choice on the part of the previous programmer. Should I care that the PK schema is spotty like this? It doesn't feel right but does it really matter? If this could create a problem, how do I get around it (I really can't move all PKs to type int without serious legwork and I have never heard of enumerations that have guid values)? Thanks.

Read the article
SQL Server: Primary Key Schema Largely Guid but Sometimes Integer Types...

- by Code Sherpa

OK, this may be a silly question but... I have inherited a project and am tasked with going over the primary key relationships. The project largely uses Guids. I say "largely" because there are examples where tables use integral types to reflect enumerations. For example, dbo.MessageFolder has MessageFolderId of type int to reflect public emum MessageFolderTypes { inbox = 1, sent = 2, trash = 3, etc... } This happens a lot. There are tables with primary keys of type int which is unavoidable because of their reliance on enumerations and tables with primary keys of type Guid which reflect the primary key choice on the part of the previous programmer. Should I care that the PK schema is spotty like this? It doesn't feel right but does it really matter? If this could create a problem, how do I get around it (I really can't move all PKs to type int without serious legwork and I have never heard of enumerations that have guid values)? Thanks.

Read the article
jQuery .closest returns undefined

- by Andy Holmes

I've got the code below which works fine, however the jquery to add the items doesnt find the data-parent-room value and just returns undefined. This is the only thing not working :( HTML: <div id="inventoryRooms">  <div class="widget box formHolder" data-parent-room="1">  <form class="widget-header rooms"> <input type="text" placeholder="Type Room name" name="roomName[]" class="form-input add-room-input input-width-xxlarge"> <input type="hidden" class="roomId" name="roomId[]"> <input type="hidden" class="inventoryId" name="inventoryId[]" value="<?=$_GET['inventory_id']?>"> <div class="toolbar no-padding"> <div class="btn-group"> <span class="btn saveRoom"><i class="icon-ok"></i> Save Room</span> </div> </div> </form>   <div class="widget-header header-margin hide"> <div class="row row-title"> <div class="col-md-3"><h5>ITEM</h5></div> <div class="col-md-3"><h5>DESCRIPTION</h5></div> <div class="col-md-3"><h5>CONDITION</h5></div> <div class="col-md-2"><h5>PHOTOGRAPH</h5></div> <div class="col-md-1 align-center"><h5><i class="icon-cog"> </i></h5></div> </div> </div>   <div class="items"> </div>  <div class="toolbar-small"> <div class="btn-group"> <span class="btn addItem"><i class="icon-plus"></i> Add Item</span> <span data-toggle="dropdown" class="btn dropdown-toggle"><i class="icon-gear"></i> Options<span class="button-space"></span><i class="icon-angle-down"></i></span> <ul class="dropdown-menu pull-right"> <li><a href="#"><i class="icon-trash"></i> Delete Room</a></li> </ul> </div> </div> </div> </div> jQuery: $(document).on('click','.addItem', function(){ $('\ <form class="widget-content item">\ <div class="row">\ <div class="col-md-3"><input type="text" class="form-control" name="itemName[]"></div>\ <div class="col-md-3"><textarea class="auto form-control" name="itemDescription[]" cols="20" rows="1" style="word-wrap: break-word; resize: vertical;"></textarea></div>\ <div class="col-md-3"><textarea class="auto form-control" name="itemCondition[]" cols="20" rows="1" style="word-wrap: break-word; resize: vertical;"></textarea></div>\ <input type="hidden" class="itemId" name="itemId[]" value="">\ <input type="hidden" name="itemInventoryId[]" value="<?=$_GET["inventory_id"]?>">\ <input type="hidden" name="itemParent[]" value="'+$(this).closest().attr('data-parent-room')+'">\ <div class="col-md-2">\ <div class="fileinput-holder input-group">\ <input id="fileupload" type="file" name="files[]" data-url="uploads/">\ </div>\ </div>\ <div class="col-md-1 align-center"><i class="save icon-ok large"> </i>   <i class="delete icon-trash large"> </i></div>\ </div>\ </form>\ ').fadeIn(500).appendTo($(this).parents().siblings('.items')); $(this).parent().parent().siblings('.widget-header, .header-margin, .hide').removeClass('hide').fadeIn(); }); Like i say, it all works fine apart from that damn data-parent-room value. Any help is appreciated! using jQuery 1.10.1

Read the article
How can I revert a 'draggable' upon failed AJAX request?

- by Frank

I have a draggable div, that needs to be dropped on a droppable. If it is dropped correctly, the droppable calls an AJAX request. If the draggable does not have a valid id or the AJAX request fails, the draggable should be reverted to it's original position. Is that something that can be done with jQuery?! Any help is greatly appreciated!! $("div.draggable").livequery(function(){ $(this).draggable({ revert: 'invalid', distance: 20 }) }); $("#trash").droppable({ tolerance: 'touch', drop: function(event, ui) { var item = ui.draggable; var id = item.attr('id'); if (id) { $.ajax( { type: "POST", url: "delete.php", data: "id=" + id, success: function(html) { if (html) { item.remove(); } else { // FAILED AFTER AJAX // is it possible to revert the draggable from here?? } } }); } else { // FAILED BEFORE AJAX // is it possible to revert the draggable from here?? } } });

Read the article
Custom URL Schema and UTI

- by user573259

I define a Custom URL Schema for my iPhone App http://iphonedevelopertips.com/cocoa/lau…url-scheme.html or a custom UTI (Uniform type identifier) developer.apple.com/library/ios/#documentation/FileManagement/Conceptual/understanding_utis/understand_utis_declare/understand_utis_declare.html%23//apple_ref/doc/uid/TP40001319-CH204-SW1 -- Where is this information stored on the iphone? (I do not mean the Info.plist of the app - here must be a central file for such settings like keychain-2.db for passes and stuff) I got some very confusing behavior of an app that was compiled installed with different settings in the Info.plist for the file type (UTI) association and I would like to check if there is some trash (old settings) left from previous versions. Regards, Frood

Read the article
Prevent content with child nodes from being deleted in umbraco

- by Soldarnal

I would like to prevent content nodes from being trashed if they have any children. I setup an event handler like so: public class KeepSafeEvents : ApplicationBase { public KeepSafeEvents() { Document.BeforeMoveToTrash += new Document.MoveToTrashEventHandler(Document_BeforeMoveToTrash); } void Document_BeforeMoveToTrash(Document sender, umbraco.cms.businesslogic.MoveToTrashEventArgs e) { if (sender.HasChildren) { e.Cancel = true; } } } However, this doesn't seem to work. I assume it is because the delete process moves the child nodes to trash first before dealing with the parent node (which then has no children). Is there another possible solution? Or am I making a simple mistake above?

Read the article
jQuery: inherit functions to several objects

- by Fuxi

hi, i made several table-based-widgets (listview-kind-of) which all have the same characteristics: styling odd/even rows, hover on/off, set color onClick, deleting a row when clicking on trash-icon. so it's always the same (prototype-)code for each widget. is there a way to have the code only once then simply apply/inherit it to all widgets? 2nd, here's some of the code - could this be optimized? var me = this; $("tr",this.table).each(function(i) { var tr = $(this); tr.bind("mouseover",function(){me.hover(tr,true)}); tr.bind("mouseout",function(){me.hover(tr,false)}); tr.bind("click",function(){me.Click(tr)}); }); $("tr").filter(":odd").addClass("odd");

Read the article
Rails + RSpec problem

- by FancyDancy

I have just installed Rspec and Rspec-rails. When i try to run the test, it says: rake aborted! Command /opt/local/bin/ruby -I"lib" "/opt/local/lib/ruby/gems/1.8/gems/rspec-1.3.0/bin/spec" "spec/controllers/free_controller_spec.rb" --options "/Volumes/Trash/dev/app/trunk/spec/spec.opts" failed Full log here: http://pastie.org/939211 However, my second "test" application with sqlite works with it. I think the problem is in my DB. My ruby version is 1.8.7, i use mysql as database. My files: specs/spec_helper.rb config/environment.rb config/environments/test.rb List of my gems My test is just: require 'spec_helper' describe FreeController do it "should respond with success" do get 'index' response.should be_success end end I really can't understand the error, so i don't know how to fix it.. Additional question: should i use a fixtures and ActiveRecord, if i going to use Machinist for creating test data? What should i do to disable them?

Read the article
How to drop a sortable block?

- by Pentium10

I have a list which is reordered using sortable. I defined a trash can div, and I want to achieve that when the blocks are dropped on this div to get deleted. So far I can't seam to fine the way to fire the drop event, when I release the item gets back to his previous position. I have this code: $(document).ready(function() { var order = null; $("#order-list").load(location.href+" #order-list>*",""); $("#order-list").sortable({ handle : '.handle', update : function (e, ui) { order = $(this).sortable('serialize'); $("#info").load("process-sortable.php?"+order); } }); }); and $("#trashcan").droppable({ drop: function(event, ui) { draggedid = ui.draggable.attr('id'); alert(draggedid); // doesn't fire $.get("process-add-subcat.php", { "action" : "delete_subcategory", "draggedid": draggedid }, function(data){ }); } });

Read the article
Creating a folder inside Mac OS App

- by Negative Zero

I want a an app that is "self-contained" (I don't know if i use the right word. "putting the app into trash bin will remove everything" is what I meant). But the app requires some resources to run. I usually put those resources into a folder. I want to move those resources into the App folder ( package contents). Can I do that? Is it a good practice to do that? When I test the app directly running from Xcode, the App runs fine. But if i run it from finder, the app will say fails to create resources folder because permission denied. I checked the app's folder permission - User(me) has read/write access. I am wondering what is causing this different behavior. The last option is to use Application Support folder, but I don't want to leave trails when user deletes the app. Can someone help me out here?

Read the article
Deleted nib still displayed when controller is pushed

- by yahuie

I have an application with a UINavcontroller under a tab bar controller. To create the navigation model I want, I push a container UIView object onto the stack to manage additional views(Thanks Frank). When I created the container class, an associated nib file was created along with it. I at first used that nib file, but it turned out it was better not to. So I deleted the nib (and selected 'also move to trash'). The problem is that it still shows up when I push its view controller onto the stack. I have tried emptying the cache in xcode and restarting xcode. What am I missing?

Read the article

< Previous Page | 5 6 7 8 9 10 11 12 13 | Next Page >