Search Results

Search found 13434 results on 538 pages for 'boot on power up'.

Page 90/538 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Unable to Boot Into Windows 7 after Ubuntu 10.04 Update

  - by PlantGuy

  I'm running a dual boot Windows 7 / Ubuntu 10.04 system. I ran the Ubuntu update last night, and today when I tried to boot into Windows 7, it goes straight to the windows recovery on my Acer 5517 laptop. I've spent the entire day trying to resolve this with no success. I used my Windows 7 Recovery Disk to reset the mbr, but that didn't help. The system was working perfectly prior to the update. It appears that now Grub is pointing to the recovery partition rather than the primary partition. Any help will be greatly appreciated. I don't relish the idea of reformatting and starting from scratch.

  Read the article

• Is it possible to boot without mounting /home?

  - by Exeleration-G

  I want to backup my /home partition on /dev/sda6 using partclone, a command line utility. To do so, I first have to unmount the partition that I want to backup. Most of the time, this is easy, but /home is used by so many processes that it can't be unmounted without first killing all those processes. So, the thing I'm looking for is a way to boot Ubuntu, without mounting /home, so I can back up the not-mounted /dev/sda6 partition. Is that possible? To be clear, it would be nice if this special boot could be 'one-time-only'. So I'm not looking for ways to change /etc/fstab in such way that /dev/sda6 won't be mounted. That's because that would require me to change /etc/fstab twice each time just to make a backup. I'm aware of the fact that there are other backup solutions available, such as deja-dup. I'd like to use partclone, though.

  Read the article

• Cannot boot from Ubuntu Live CD on preinstalled Windows 8 laptop

  - by seferov

  I bought a Sony Vaio with Windows 8 yesterday. I want to install Ubuntu, (latest version), alongside Windows. There is an assist button on the laptop to enter the boot option menu, (otherwise, Windows 8 is booted by default. Whenever I choose the, 'boot from CD' option, it says 'No operating system found'. CD is valid since I tried it on another computer and it worked fine. I have tried both versions, 12.04 and 12.10. What is the problem, or how should I install Ubuntu on my laptop?

  Read the article

• install 64 bit as dual boot with 32 bit

  - by profgeorgefhart

  I downloaded Ubuntu 12.10 - bit .iso onto a bootable USB and want to put it on to my 32 bit 12.10 system as a dual boot, using a totally separate 1 Tb disk [which already has data on it]. However, when I go to restart and hit F8 fir BIOS set-up, I can change all the settings except the boot search order. Is there some other way to force the startup to read the USB first? Is the fact that I cannot change the search order to do with the fact that the 32 bit OS was 'Installed in legacy mode' not 'EFI? How can I rectify this? (This might be related -- might I need to update my BIOS for my Intel DX38BT motherboard? I think their last upgrade was 2009.)

  Read the article

• 12.04 boot failure after update

  - by msanderz

  I am using 12.04 and updated using Synaptic Package Manager. Now, however, when I turn on the machine it fails to boot, just a blank screen. If I shut off the machine and start it again and press F12 (on my laptop) to get the boot menu and select the default for HD-0 it boots OK. I had previously used Update Center and had a similar problem, which I corrected by reverting to "Previous" setup. Are there any fixes for this problem or am I unique in this situation. Ubuntu 12.04 Lenovo G575 laptop msanderz Thanks in advance.

  Read the article

• Fedora installed in Legacy mode, how to make it work in UEFI?

  - by TryntaLearn

  I am trying to install a linux distribution on my new laptop. It's an MSI GE40 which comes preinstalled with windows 8. It's a UEFI machine. I have tried installing Ubuntu and Fedora with limited success. I've tried: running it in UEFI, UEFI with CSM mode, with secureboot enabled, ... with secureboot disabeled, ... with secureboot enabled but in user mode. I have had no success with any of these methods. With Ubuntu the grub loader shows up, but when I pick 'try ubuntu', or 'install ubuntu', it's just a blank screen(I've been using liveusb's btw). With Fedora, it'll show me the next screen on which it says 'binary authorised by vendor certificate' or 'Secure boot not enabled' and then stop doing anything. The closest thing to success I reached was switching to legacy mode to install Ubuntu, in which case I was able to get to the ubunutu installer but it wouldn't recognize windows 8 on my computer, so instead of continuing on I rebooted, and removed the USB pendrive to find my computer couldn't find windows 8. After a little dicking about I got it to find windows 8 again. Any ideas on how I should go about trying to install a distro on my computer? UPDATE:- So I ended up installing fedora using Legacy mode. To use both it and Windows at boot, I manually enter automatic repair so I can get to my UEFI settings and switch boot mode to UEFI to boot windows 8. I guess my question needs to be modified as to how do I get all of this to work in UEFI mode, so I can dual boot via selection through a bootloader, and not by repeatedly switching boot mode.

  Read the article

• Installing Linux on a Windows 8.1 laptop

  - by nicoX

  I would like to clean install a linux distribution as Ubuntu etc. My laptop that runs Windows 8.1. I have two options in mind. Clean install or dual boot. My technical question is: my laptop have a 8GB SSD drive, which it uses to boot Windows with and a 500GB for storage. I wonder what that 8GB SSD stores? It can't store the whole Windows install as that would be much more than 8GB. Also if I would do a clean install of Ubuntu could I use the 8GB SSD to have Ubuntu boot up quicker. How would I install it. Option two, if I would like to dual boot, how would I proceed having the SSD to boot both systems? I also wish to ask about the Legacy and UEFI differences. Windows runs with UEFI. So when I'm installing Linux, should I run Legacy, and if I dual boot, what option to I choose?

  Read the article

• How do you recreate the System Recovery environment in Windows 7?

  - by Howiecamp

  I'm running Windows 7 Home Premium RTM (64-bit) and I want to take advantage of the system recovery tools (eg the Command Prompt) without using the Windows 7 DVD. My understanding is that this environment (WinRE) should be installed to your HDD by default as part of the Windows 7 installation. However, when I hit F8 on boot and select "Repair", I get: Windows failed to start. A recent hardware or software change might be the cause. To fix the problem... Status: 0xc000000e Info: The boot selection failed because a required device is inaccessible. The "Info" line seems like the smoking gun. My next step was to boot from the Windows 7 DVD, and choose "Repair". It indicated my Recovery Environment wasn't on the Windows 7 boot menu (perfect) and offered to fix it. I said yes and rebooted, however same issue as above. In addition, when I booted in to Windows 7 and I looked at the boot menu options, the recovery/repair option was not there. Only my Windows installation. Finally, I ran the Disk Management tool (diskmgmt.msc) and took a look at the contents of my "System Reserved" partition (which was set to "Active" as normal). It's unclear to me what the contents should look like, however it is my understanding that the WinRE environment gets installed to this partition. (As part of the above troubleshooting I followed http://superuser.com/questions/25728/how-to-fix-windows-7-boot-process which lead to http://www.sevenforums.com/tutorials/668-system-recovery-options.html).

  Read the article

• F#: how to find Cartesian power

  - by Nike

  I have a problem with writing a Cartesian power function. I found many examples about calculating Cartesian Product, but no one about Cartesian power. For example, [1;2] raised to power 3 = [ [1;1;1] ; [1;1;2] ; [1;2;1] ; [1;2;2] ; [2;1;1] ; [2;1;2] ; [2;2;1]; [2;2;2] ] I use following code to calculate Cartesian Product: let Cprod U V = let mutable res = [] for u in U do for v in V do res <- res @ [[u;v]] res And trying to calculate Cartesian power. I use following code to calculate Cartesian Product: let Cpower U n = let mutable V = U for i=0 to n-1 do V <- Dprod U V V Visual Studio said: Error The resulting type would be infinite when unifying ''a' and ''a list'. I will thankful for any help and links.

  Read the article

• how can reduce power usage in location based application in android how can implemented

  - by narasimha

  hi how can reduce the power usage in my application

  Read the article

• Impossible installing Ubuntu 13.04 in UEFI mode with Windows 8 preinstalled

  - by Lautaro Vergara

  I know this is a dejavu but let me please explain my problem. When booting 13.04 installation media EFI mode get to a black screen with Grub version 2.00-l3ubuntu3 version appears after selecting "install" or "try Ubuntu", there appear error messages: - failure reading sector ... from 'cd0' - you need to load the kernel first I have a Dell Vostro 3560 with Windows 8. I have downloaded and burned ubuntu-13.04-desktop-amd64.iso. Hashes checked. I've booted from the dvd with Secure Boot enabled. The same happens when Secure Boot is disable. When booting with Legacy BIOS, installation starts. I tried Ubuntu without installing and looks OK. BUT, I did not follow the installation because in https://help.ubuntu.com/community/UEFI#Converting_Ubuntu_into_EFI_mode there appears "if the other systems (Windows Vista/7/8, GNU/Linux...) of your computer are installed in EFI mode, then you must install Ubuntu in EFI mode too.", which is the case in my computer. I have read many similar questions and the corresponding answers from people in this forum, but till now I haven't found a solution. Could someone help me on this subject? Thanks in advance!

  Read the article

• Ubuntu 13.10 installed and worked, but now not working

  - by San

  I have a HP G7000 laptop. I updated/upgraded from 13.04 to 13.10, after the software updater recommended I upgrade. I have duel booting system with Windows Vista. The system was working for the past two days, but I start getting the errors below, after selecting Ubuntu in Grub Menu on startup and at the splash screen it says "Press S to Skip or M for manual configuration" Pressing S gives a black screen and m takes you the errors below. Windows boots and works fine after selection in the Grub Menu. [ 15.235703] EXT3-fs (sda5): error: unrecognized mount option "discard" or missing value. [ 16.788072] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode flags [expected 2, found 0] [ 20.860071] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode flags [expected 2, found 0] [ 20.980076] [drm:intel_pipe_config_compare] *ERROR* mismatch in adjusted_mode flags [expected 2, found 0] Root filesystem Check failed root@simamhar:~# Tried boot-repair using the LiveCD method, no luck. System still gives above error. (you can view the boot-repair log here http://paste.ubuntu.com/6287287) When I use the liveCD for 13.04 or 13.10 however, my hard disk is recognized and I can read the files. Why is it that the installation on the hard disk has stopped working and does not recognize my / ? What do the above errors mean and how can i solve them? There was no power failure before, during or after the update/upgrade process from 13.04 to 13.10. I now would like to go back to 13.04 without reinstalling afresh? Any help will be appreciated. Thanks.

  Read the article

• What would cause SSD to become not detectable?

  - by Balthazar

  I recently purchased an Intel 520 120GB SSD and installed Ubuntu on it. Occasionally my system will freeze and I will have to ALT-PRINT SCREEN-REISUB to reboot. Sometimes it will reboot and work just fine. Other times it just hangs at a flashing prompt. If I boot from a Live USB I can run Boot-Repair and it will usually reboot fine the next go round. I have noticed today that when I am running the live USB and open Nautilus my SSD partitions will sporadically disappear and reappear. Even if they are mounted. I was thinking it was a poor connection, but I have tried a different SATA cable and a different SATA port. Is it possible I have a faulty SSD, or is there something different you have to do with SSDs to make sure they stay mounted (I was thinking like it has some sort of goofy power savings feature that needs to be disabled). I found the place in the bios where the SATA ports are listed. They are all set to AHCI(Chipset - SATA Mode = AHCI) The unmounting/remounting happens all the time. I think this is the relevant part of the syslog: http://pastebin.com/WxHdRAAq

  Read the article

• Windows 7 disappeared in list of Grub while loading

  - by Riyad A.

  Installed Ubuntu 12.04 alongside the Windows 7 two weeks ago. Initially haven't any issues with that. day ago installed updates on Ubuntu and after restarting the system found the absence of Win7 in Grub list. Before the HDD has been partitioned on two volumes Disk C and Work Disk(don't remember the name). When doing the fdisk -l: Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xa93031e0 Device Boot Start End Blocks Id System /dev/sda1 * 2048 408833842 204415897+ 7 HPFS/NTFS/exFAT /dev/sda2 488386560 976773119 244193280 7 HPFS/NTFS/exFAT /dev/sda3 408834046 488386559 39776257 5 Extended Partition 3 does not start on physical sector boundary. /dev/sda5 408834048 484421631 37793792 83 Linux /dev/sda6 484423680 488386559 1981440 82 Linux swap / Solaris Partition table entries are not in disk order Disk /dev/mmcblk0: 3965 MB, 3965190144 bytes 49 heads, 48 sectors/track, 3292 cylinders, total 7744512 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x00000000 Device Boot Start End Blocks Id System /dev/mmcblk0p1 8192 7744511 3868160 b W95 FAT32 When sudo mount /dev/sda ~/1 -o offset [488386560*512] - opens and mounts WORK disk. Need help: how to See and mount disk C. how to see and adjust the Grub to appear both systems in Grub menu when loading?

  Read the article

• Why does Ubuntu gets stuck on the loading screen?

  - by mohit

  I've been experiencing many problem lately since I fresh installed Ubuntu 12.04 LTS on my SONY VAIO VPCEH with Windows 7 previously installed. Sometimes when I try to boot Ubuntu, it gets stuck at loading screen. There seems to be some problem with driver (as far I can judge). Following is the log generated, when I press Esc during the boot (before the problem occurs): ... * Stopping System V initialization compatibility [ok] * Starting System V runlevel compatibility [ok] * Starting crash report submission daemon [ok] * Starting automatic crash report generation [ok] ... ... * Starting LightDM Display Manager [ok] Nothing works after that, no Esc, etc, except restart. Also I've observed the following: Inactivity of Hard-drive (Led doesn't glows). Flashing, or blinking, of Caps-lock and Scroll-lock On restart, Ubuntu seem to load successfully. However, the loading screen has somewhat basic graphics. This problem started after I installed Additional drivers: NVIDIA accelerated graphics driver Also, most of the times Ubuntu loads without any problem. However, it is annoying to restart everytime it fails. So my question is: Why this happens and what is the solution?

  Read the article

• Lubuntu Full Install on USB Drive with Full Disk Encryption and Grub2

  - by vivi

  I apologise for the wall of text, but I want you to scrutinize my thought-process to make sure there's no mistakes and no other way around it: I wish to have a full install of lubuntu with full disk encryption on one of my usb drives. The laptop I would be booting it from also has windows 7. I want to maintain that OS. From what I've read I must place grub2 on the usb drive so that: If I have the usb plugged in, the laptop would start lubuntu (having USB HD in the BIOS Boot options) If I don't have the usb plugged in, it would normally start windows 7. That's exactly what I want it to do. But: If I install from the normal .iso: Clicking "install lubuntu alongside them" would install it onto my normal HD. Clicking "Erase disk and install lunbuntu" would delete all the stuff I have in my HD and install lubuntu on it. Clicking "Something else" would allow me to choose to install lunbuntu and grub2 onto the usb drive, but would not provide it with encryption. So the normal .iso won't work for what I want. Then I found the alternate .iso and this tutorial: It allows me to install lubuntu with all the options I want and gives me the option to choose where to place the grub2! Hopefully there are no flaws in my train of thought. If there aren't, I have a few questions regarding that tutorial: The author says in his case choosing "Yes to install GRUB to your MBR" installed the grub to the usb drive's mbr. I can't have "in his case". I need to be sure that's what it will do, so that it doesn't mess up the windows boot loader. Choosing "no" would open this window and allow to choose where I want to install the grub. Unfortunately I don't understand which option I should type in the box to install it into the usb drive. Would removing my laptop's Hard Drive ensure that the grub is installed onto the usb drive if i picked first option, "yes"? I apologise once again for the wall of text and appreciate any help you guys can offer me.

  Read the article

• Booting Ubuntu 13.10 form USB on server with no OS (Dell PowerEdge T110)

  - by user35581

  I have a Dell PowerEdge T110 (Xeon 1220v2) server with no OS. From my mac, I was able to save the Ubuntu 13.10 for server iso (x86) and used UNetbootin to save the iso to a USB stick (2GB). I was hoping to boot the server from USB, and all seemed to be going well, BIOS even detected my USB drive when I plugged it in, but for some reason I'm getting a "Missing operating system" error. I checked the USB drive and it appears that UNetbootin put the correct files on it form a cursory glance (although I'm not entirely sure what I should be looking for). Should I be able to boot a server with no OS from a UNetbootin created Ubuntu 13.10 USB? And if so, why might BIOS not find the right files? I had read that there is a USB Emulation setting in BIOS, but I haven't been able to find this in the menus. My understanding is that by default, this is set to on. I might try wiping the USB stick and running UNetbootin again. The USB is formatted to MS-DOS FAT16 (should it be formatted some other way?).

  Read the article

• How to run multiple distros using lvm

  - by Mark

  I've seen quite a few posts around about running multiple distros but not sure they apply to using LVM (and without Windows). I'm using a machine that's about 3 years old. Setup: Intel Core i7 2.8GHz 8GB Ram 1TB SATA HDD At this point, I'd like to install 12.10 and Mint 14, leaving the option open to install additional distros down the road. I could be way off, but I'm thinking about creating at least 2 primary /boot partitions (1 for 12.10 and 1 for Mint) and another partition for LVM leaving room for additional /boot partitions. Then creating a VG and separate LVs for Ubuntu 12.10 and Linux Mint 14. I understand I can share partitions between the 2 installs, but I'm only using this for testing and I have tons of space to play with. LVM seemed logical considering I may want to install and test additional distros. I guess I could share the /swap partition across the board without problems, right? I'm unclear about GRUB2. How do I handle the bootloader situation? Install 12.10 and get it running then make changes to grub.cfg after installing Mint? And do I not install GRUB for Mint or do I install it in a different location? Any guidance would be appreciated.

  Read the article

• Cannot Create Bootable USB Drive from .iso file

  - by tarabyte

  I've tried formatting the flash drive as FAT as well as Mac OS journaled through diskutility but still cannot successfully create a bootable drive. I'm following the directions here exactly: http://www.ubuntu.com/download/help/create-a-usb-stick-on-mac-osx Environment: Macbook Pro trying to create a bootable flash drive for a Macbook Pro. 8GB flash drive. Tested ubuntu-12.04.1 as well as ubuntu 12.20 .iso 64-bit downloads. Nothing to repair in disk utility for this hard drive. Every time I finish step 8 of the tutorial I get "file system not recognized" with the options to "initialize" meaning to reformat my drive, "ignore" or "eject." When I try to re-inspect the flash drive in disk utility after plugging it back in I see that it has some error when I try to verify it but the "repair" button is disabled. I just want to boot to ubuntu when my mac first starts up. Oh the pain. http://lifehacker.com/5934942/how-to-dual-boot-linux-on-your-mac-and-take-back-your-powerhouse-apple-hardware "linux is free insomuch as your time is worthless" - old wise man

  Read the article

• Why does Ubuntu 13.10 not detect my Win7 partition?

  - by goutham

  I'm trying to install Ubuntu 13.10 alongside Windows 7 on my DELL INSPIRON 14z 5423 laptop and I'm new to all of this. I'm using the Ubuntu 13.10 64-bit ISO burned onto a CD. The first time I tried to install it, Ubuntu said it did not detect any other OS, which meant I only had 4 options: Erase disk and install Ubuntu (I don't want to do this) Encrypt new Ubuntu. Use LVM. Something else. If I choose the Something else option, it brings me to the partition menu and says that I have 1 disk with free space of (500Gb), but that's not true because I have Windows 7. I restarted the laptop several times and booted the CD again and I got exactly the same as I did previously. How do fix this problem and install Ubuntu alongside Windows 7? After executing "sudo fdisk -l" command in terminal ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 314574847 157184000 7 HPFS/NTFS/exFAT /dev/sda3 314574848 629147647 157286400 7 HPFS/NTFS/exFAT /dev/sda4 629147648 976771071 173811712 7 HPFS/NTFS/exFAT After removing one partition I executed command once again ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 500.1 GB, 500107862016 bytes 255 heads, 63 sectors/track, 60801 cylinders, total 976773168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 4096 bytes I/O size (minimum/optimal): 4096 bytes / 4096 bytes Disk identifier: 0xd2b811c5 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 629145599 314469376 7 HPFS/NTFS/exFAT /dev/sda3 629147648 976771071 173811712 7 HPFS/NTFS/exFAT

  Read the article

• Ubuntu does not recognize my built-in monitor.

  - by B3tturTh3nU

  I've recently discovered of a boot problem Ubuntu has with my laptop. I have successfully installed Ubuntu on two other computers, and I've never experienced this problem. What happens is, after the live boot CD loads, the screen goes completely blank. Although, I suspected that there was no problem booting, so I loaded with BIOS only, which worked perfectly fine. Of course, not being very proficient with this, I have no idea what needs to be done to fix the problem. I have switchable graphics cards(the ATI Mobility Radeon HD 5650, and some low-end Intel card), and an Intel i5 quad core processor. I was booting with the Ubuntu 10.10 64 bit desktop distribution. If there's any more information you need from me, please let me know. EDIT: I was able to look into this a bit more, thanks to one of the comments provided, and I have some new information. Ubuntu does seem to be able to recognize both of my graphics cards. The problem I found was that, in the Xorg.0 log, it mentions that there were "no screens found." I'm using a notebook, so the screen is built in. Does anyone know of a way to get Ubuntu to recognize the monitor?

  Read the article

• What Does Installing Ubuntu "Alongside" Windows Entail?

  - by Soft Skeleton

  I recently posted a question about an error I was receiving trying to access Ubuntu from the boot menu. I am using Windows 7 and Ubuntu 12.x (I THINK because I haven't accessed it in over a year due to being unable to run an important program for one of my classes on Ubuntu). On another laptop, I partitioned the hard drive and installed Windows and Ubuntu on the partitions. On this laptop, I simply installed Ubuntu from Windows, picking the option "alongside Windows", and didn't partition my hard drive manually. I was under the impression "alongside" entailed that Ubuntu would partition my hard drive, and that if I were to return my Windows partition to factory settings it would not affect the Ubuntu partition. However, given my current problem, I am wondering if I was mistaken in this assumption? When installing Ubuntu from Windows, selecting "alongside" Windows as the option from the Ubuntu installer, does that simply install Ubuntu within the Windows partition and thus returning it to factory settings would wipe out anything I had on the Ubuntu OS as well? Ubuntu is still in the boot menu as an option, but when I try to access it it says the drive is "corrupt" and wubi is mentioned in the error. I additionally tried to download a program ran from Windows to investigate partitions and there were no sign of my Ubuntu partition viewable from Windows. Is it possible Windows just can't see it? Any insight, corrections or answers is appreciated.

  Read the article

• wrong kernel running after install

  - by ticktockhouse

  I have installed Ubuntu 14.04 from unetbootin. When it reboots after the install, uname -r says: 3.5.0-17-generic ..this means that no modules have loaded for the kernel that is actually installed (3.13.0-32-generic). Does anyone know why this kernel should be installed via the install process? Is it an artifact of using Unetbootin? Booting into the Unetbootin image gives the correct kernel, and thus the modules load. Knowing why is one thing, but I'm not sure how to remedy it now. Because no modules are loaded, I can't connect to the network or connect a USB drive. I've tried update-grub, which seems to find the correct kernel, but doesn't seem to tell the system to boot from it. I've also tried selecting the kernel at boot time using the "Advanced Options for Ubuntu", and the 3.13.x kernel is the only one listed. Selecting this lead to the 3.5.x kernel stubbornly loading.. I'm a fairly accomplished sysadmin, but this one has me flummoxed :) Can anyone help?

  Read the article

• "Missing Operating System" after installing Ubuntu 12.04 from a CD on a Macbook Pro

  - by Pierre

  I followed this guide to install Ubuntu 12.04 on my Macbook Pro 8,2 (late 2011): https://help.ubuntu.com/community/MactelSupportTeam/AppleIntelInstallation I used a CD. I synced the partition table on rEFIt, and it went fine. I do have an icon to boot on Linux, but when I launch it, after a few seconds I have "Missing Operating System" displayed, and that's all... How can I fix that? The only thing I see is, in the guide, it is mentioned this: On the last dialog of the installer, be sure to click the “Advanced” button and choose to install the boot loader (grub) to your root Ubuntu partition, for example /dev/sda3. This will be the only partition with the EXT4 file system. In Ubuntu 12.04 installation process, there is not such an option, but there is a dropdown menu to select where the grub bootloader should be installed. It was /dev/sda by default, but I selected my root Ubuntu partition (in my case, /dev/sda5). I got a warning message (but actually, it was the same warning message even when I selected /dev/sda), and I continued the installation... Thanks in advance for your help!

  Read the article

• Help with dual booting Windows 8.1 Professional and Ubuntu 13.10

  - by user1292548

  I recently installed a clean version of Windows 8.1 Professional on my Lenovo Y500 (with Samsung 256GB 840 Pro SSD). I have Windows all set up and running normally. I am trying to dual boot Windows 8.1 and Ubuntu 13.10, but the installation procedure don't allow me to either "Install alongside..." or shows my SSD partitions correctly when I chose the "Something Else" option. I have created a 25GB partition of free space in the Windows disk manager, but on the installation screen on Ubuntu, it shows the whole drive as a free space. I have tried installing with a burned .ISO disk and a bootable USB, the results are the same for both. Windows Disk Management screen: http://imageshack.us/a/img855/9504/59zu.jpg The Ubuntu installation screen: http://imageshack.us/a/img62/2712/9g6i.jpg I've ran into this problem before when trying to dual boot Ubuntu and Windows 7 Professional a month ago. But I gave up and never resolved the issue. --EDIT-- I tried what Eero Aaltonen suggested, and this is my result: ubuntu@ubuntu:~$ sudo parted /dev/sda print Warning: /dev/sda contains GPT signatures, indicating that it has a GPT table. However, it does not have a valid fake msdos partition table, as it should. Perhaps it was corrupted -- possibly by a program that doesn't understand GPT partition tables. Or perhaps you deleted the GPT table, and are now using an msdos partition table. Is this a GPT partition table? Yes/No? yes Model: ATA Samsung SSD 840 (scsi) Disk /dev/sda: 256GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags ubuntu@ubuntu:~$

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >