Search Results

Search found 3909 results on 157 pages for 'brand newbie'.

Page 90/157 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Maximum 5 minute battery life with Ubuntu 11.10 on HP laptop

  - by JamesG

  I apologise if this question is too similar to the numerous others already asked, but it seems that my difference in battery life is significantly more noticeable than others that have been reported. I recently installed Ubuntu 11.10 on my HP Pavilion dv6 laptop (which I purchased brand new just under one year ago). When running Windows 7 on this laptop, I have been able to get up to two and a half to three hours of battery life with wireless disabled and when running only Microsoft Word. However, when running Ubuntu, I am unable to use the laptop if it is not plugged in. Upon unplugging the fully-charged machine from the power cord, if I have wireless enabled, I immediately receive a notification that the battery levels are critically low and that shutdown is imminent. Even if I replace the power plug, the laptop shuts down within thirty seconds. If I disable wireless capability, I am able to run the laptop for an absolute maximum of five minutes on battery powers before receiving the same message. I have tried running with Jupiter on Power Saver mode, but to no noticeable effect. Ignoring the fact that I can't use my laptop without being attached to a power source, I really do enjoy using Ubuntu, and hence would greatly appreciate any help that can be offered.

  Read the article

• SOA performance on SPARC T5 benchmark results

  - by JuergenKress

  The brand NEW super fast SPARC T5 servers are available. The platform is superb to run large SOA Suite environments or to consolidate your whole middleware platform. Some performance advices, recommended for all workloads: Performance profile for SOA apps on Oracle Solaris 11 BPEL (Fusion Order Demo) instances per second OSB (messages / transformations per second) Crypto acceleration study for SOA transformations SPARC T4 and T5 platform testing, pre-tuning Performance suitable for mid-to-high range enterprise in stand-alone SOA deployment or virtualized consolidation environment shared with Oracle applications 2.2x to 5x faster than SPARC T3 servers 25% faster SOA throughput, core to core than Intel 5600-series servers (running Exalogic software) SPARC T5 has 2x the consolidation density of Intel 5600-class processors 2x faster initial deployment time using Optimized Solutions pre-tested configuration steps Over 200 Application adapters for easiest Oracle software integration Would you like to get details? We can share with you on 1:1 bases T5 SOA Suite performance benchmarks, please contact your local partner manager or myself! SOA & BPM Partner Community For regular information on Oracle SOA Suite become a member in the SOA & BPM Partner Community for registration please visit www.oracle.com/goto/emea/soa (OPN account required) If you need support with your account please contact the Oracle Partner Business Center. Blog Twitter LinkedIn Facebook Wiki Mix Forum Technorati Tags: T5,TS Sparc,T5 SOA,bechmark,SOA Community,Oracle SOA,Oracle BPM,Community,OPN,Jürgen Kress

  Read the article

• Install lubuntu on an old Dell c600 : Video issues

  - by maniat1k

  I am trying to install lubuntu on an old laptop. I use the 386 alternate instalation of it, because it has only 256mb ... All when ok so when I start up the lubuntu the screen splits between 1024x768 and 800x600... its very horrible to use =). Ok I do this: lspci and found an ATI Rage mobility M3. So I tryied the old xorg way to edit the missing resolution: Section "Screen" Identifier "Default Screen" Device "ATI Technologies, Inc. Rage Mobility M3 (AGP)" Monitor "Generic Monitor" DefaultDepth 24 SubSection "Display" Depth 1 Modes "1024x768" EndSubSection SubSection "Display" Depth 4 Modes "1024x768" EndSubSection SubSection "Display" Depth 8 Modes "1024x768" EndSubSection SubSection "Display" Depth 15 Modes "1024x768" EndSubSection SubSection "Display" Depth 16 Modes "1024x768" EndSubSection SubSection "Display" Depth 24 Modes "1024x768" EndSubSection EndSection on an brand new xorg.conf... Do an init 6 to see if X take the changes, but nothing habbened: also tryed to do pkg-reconfigure -changedir /etc/X11 (where I created the new xorg.conf) and nothing.. removed the X conf from /tmp.. also do sudo apt-get update / upgrade... and no luck... Anyone can help me and tell me how to reconfigure X with the terminal? Can anyone give me a hand?

  Read the article

• What and all the areas of Linux a PHP developer should know about? (Like just commands of it or something advanced)

  - by droidsites

  I've developed a website using PHP but I implemented it on Windows OS and hosted it on Windows server. I just searched the PHP job market to know the on-going technology requirement and to keep my knowledge up-to-date accordingly with the job market. I see more are asking for LAMP stack. I understand the sort of skills required for a developer in PHP and MySQL. But coming to the Linux and Apache what kind of the skills exactly companies expect from a developer? On what should I be focusing in case of Linux, Apache whilst developing my website using these LAMP stack? I am going to develop a new website and want it to be using LAMP. But I want to know what difference it makes? Why LAMP stack got more demand in the job market compared to WAMP ? Edit: Sorry I thought my question is creating confusion ... so I put my question in different words as What and all the areas of a Linux a PHP developer should know about? (Like just commands of it or something advanced) Note: I am Linux newbie

  Read the article

• ubuntu nic card issue

  - by Blainer

  I am trying to install NIC r8168 and it shows everything installed ok. It is a brand new NIC and the lights wont come on when I plug in a ethernet. The NIC is that is not working is eth0. Why does it show the r8168 driver being used by 0? My NIC model number is ST1000SPEX if anyone is wondering. lsmod Module Size Used by r8168 215669 0 ifconfig eth0 Link encap:Ethernet HWaddr 00:0a:cd:1e:0a:4a UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:43 Base address:0x2000 eth1 Link encap:Ethernet HWaddr 00:19:d1:1d:f6:7a inet addr:192.168.1.83 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::219:d1ff:fe1d:f67a/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:551467 errors:0 dropped:0 overruns:0 frame:0 TX packets:145219 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:409744342 (409.7 MB) TX bytes:12233173 (12.2 MB) Interrupt:21 Memory:dfde0000-dfe00000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:280 errors:0 dropped:0 overruns:0 frame:0 TX packets:280 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:22608 (22.6 KB) TX bytes:22608 (22.6 KB) Ubuntu 11.10 x64 Kernel 3.0.0-12-generic

  Read the article

• Can't install Linux drivers for ASUS N-13 wireless adapter

  - by jcc

  I have a USB N13 wireless Adapter with install CD-- For Windows. I downloaded drivers from ASUS FOR N13 for Linux. Disregard install CD that came with adapter; it's for Windows. I then downloaded Windows Wireless driver install program app from Software Center in Ubuntu 12.10. The problem is me. I am newbie with all things linux; software sources, G Debi, default archive manager, synaptic package manager and the Terminal. The downloaded driver file is a .zip file. I managed to extract it to a tar.gz file and then to open it to the contained files. When I use the Windows Wireless driver program it ends up telling me there is no .inf file and goes no further. It wants to install .inf file but I don't even see one in all the files. Can someone please help me . I think you can tell by my wording I don't have a clue. I hope this is'nt too chatty. I've tried to be explicit and to the point. Thank you. Oh, this is on an ASUS LAPTOP K53E. I've looked all over Ask Ubuntu and finally found some questions even on the N13 but they didn't help; still some differences in the exact problem.

  Read the article

• Introducing the PeopleSoft Interaction Hub

  - by Matthew Haavisto

  The PeopleSoft Applications Portal has just been re-branded as the PeopleSoft Interaction Hub.  It's not just a name change, however.  As part of our ongoing efforts to deliver a richer user experience to PeopleSoft customers, Oracle/PeopleSoft is now offering an enhanced restricted use license (login required) of the PeopleSoft Interaction Hub free with PeopleTools.  This change extends the existing restricted use license to include the following additional capabilities: Dynamic Unified Navigation.  Enables customers to easily provide seamless, unified navigation among their entire PeopleSoft application portfolio. Site-wide branding.  Makes it easier to brand your ecosystem and provide a vivid, contemporary appearance for your applications. These additions augment the capabilities provided in the previous restricted use license, which remain available: creation and use of collaborative workspaces, and pre-built collaborative services for use in related content.  (See the license notes (login required)for a complete list of everything that is granted with the PeopleTools license.)PeopleSoft is moving to deliver a contemporary user experience for your applications users, and the this license change supports that direction.  In addition, the name change reflects our positioning of the PeopleSoft Interaction Hub as a primary means for unifying your PeopleSoft ecosystem, and providing a richer, web-site-based user experience rather than a pillared, application-based experience.See this white paper to get an idea of some of the capabilities that you can employ with the PeopleSoft Interaction Hub to enhance the PeopleSoft user experience.  In addition, this red paper provides valuable 'how-to' guidance.  In the near future we will be producing a best practices guide for deployment.  In the mean time, the most recent release/feature pack of the PIH automates the setup of unified navigation with a Workcenter specifically supporting Unified Navigation. This Workcenter guides administrators through the setup process, and streamlines things.So what should customers do if they still want to use the PeopleSoft Interaction Hub for traditional portal purposes?  Customers can employ the PIH's full capabilities such as multiple site deployment/management and content management, by buying the full, unrestricted license. We are continuing to enhance the product, and it remains part of Applications Unlimited, and we have some exciting features planned.

  Read the article

• Ubuntu Boot Slow - Late Drive Access

  - by Mo2

  So I just installed Ubuntu on a brand new Samsung 840 Pro SSD and have noticed that it is slower than expected. The LED access light doesn't start blinking until after 20 seconds or so have passed, after which the boot up seems to actually start. Does anyone have any ideas as to why this is happening? I have Windows 7 installed on a separate SSD and use Windows Loader as the main loader. Windows Loader points to GRUB2, from which I then start Ubuntu up. The 20 seconds count that I mentioned earlier starts AFTER I select Ubuntu 14.04.1 from the GRUB2 menu. Any help is appreciated. EDIT: I forgot to mention that I have only one partition for / and /home. I intend on using a shared NTFS drive for my documents and other personal files, so I had no need for the /home. I did not make a /swap since I have 12 GB of RAM. I also did not make a /boot since I was told that it's not really necessary in my case.

  Read the article

• How to handle new domain names?

  - by michael

  I have a new product which I'll call a pen ink reloader. I have a website using my products name, for example, www.inkywink.com which I want to have accessed by searches for keywords such as "pen ink", "pen out of ink" "ink for pens" etc. , since nobody knows that a pen ink reloader exists. I see that its quite difficult to get on front page for these keywords since they have lots of competition. However I notice that the exact phrases I want to rank highly for are available as domains. I purchase "www.penink.com" and "penoutofink.com" which for arguments sake are highly searched and the perfect keywords to get eyes on my money site www.inkywink.com . Two questions: 1. What is my best option to leverage those names so that they appear near top of searches so that I can get traffic to my money site? Do I just have them redirect 301 to inkywink.com or should I create small original content on each with links to my main site? 2. If I just have them redirected to inkywink.com, am I able to use keywords in metatag and headers for each site separately or do they all automatically obtain the same headers and tags as the site to which theyre redirected ? Thanks to anyone who can help as I'm a real newbie to all this.

  Read the article

• I just recursively chmod'd everything under / to 750. Any tips?

  - by Ouairz

  I won't be the first and I won't be the last, I suppose. While playing around with the find command, I made a whoops and it would appear that instead of changing the permissions of the ~/web directory to 750, it changed the permissions of the entire filesystem (/) to 750, however I'm not certain, but any attempt to investigate is thwarted by Permission denied messages. For everything. This was the offending command: sudo find ~/web . type d -exec chmod 750 {} If I'm not mistaken, the Ubuntu team disabled root logins as a safety precaution so I'm out of ideas. I'm (obviously) a total newbie when it comes to file permissions so I was wondering if anyone had some good or even some bad advice to share. I've mentally prepped myself to losing everything on the computer which is only of mild consequence, since I have backups, but I did do a bit of work on this box over the week and it would be a shame to lose it all due to a boneheaded mistake. If you are reading this message, ask yourself, have you backed up any of your work recently? Thanks in advance for any insights. Feel free to scold me for using sudo carelessly

  Read the article

• Rewrite img and link paths with htaccess and serve the file from rewritten path?

  - by frequent

  I have a static mockup page, which I want to "customize" by switching a variable used in image-src and link-href attributes. Paths will look like this: <img src="/some/where/VARIABLE/img/1.jpg" alt="" /> <link rel="some" href="/some/where/VARIABLE/stuff/foo.bar" /> I'm setting a cookie with the VARIABLE value on the preceding page and now want to modfiy the paths accordingly by replacing VARIABLE with the cookie value. I'm a htaccess newbie. This is what I have (doesn't work): <IfModule mod_rewrite.c> # get cookie value cookie RewriteCond %{HTTP_COOKIE} client=([^;]*) # rewrite/redirect to correct file RewriteRule ^/VARIABLE/(.+)$ /%1/$1 [L] </IfModule> So I thought my first line gets the cookie value and stores this in %1. And on the second line I'm filtering VARIABLE, replace it with the cookie value and whatever comes after VARIABLE in $1. Thanks for sheeding some light on what I'm doing, doing wrong and if I can do this at all using htaccess. EDIT: I'm sort of halfway through, but it's still not working... Mabye someone can apply the finishing touches: <IfModule mod_rewrite.c> # check for client cookie RewriteCond %{HTTP_COOKIE} (?:^|;\s*)client=([^;]*) # check if an image was requested RewriteCond %{REQUEST_FILENAME} \.(jpe?g|gif|bmp|png)$ # exclude these folders RewriteCond %{REQUEST_URI} !some/members/logos # grab everything before the variable folder and everything afterwards # replace this with first bracket/cookie_value/second bracket RewriteRule (^.+)/VARIABLE/(.+)$ $1/%1/$2 [L] </IfModule> Still can't get it to work, but I think this is the correct way of doing it. Thanks for help!

  Read the article

• Grub2 won't detect Ubuntu 11.10 OS after reinstalling Win XP hal.dll.

  - by yoopian

  Hi I'm an Ubuntu newbie here. I've installed ubuntu 11.10 to dual boot on a single HDD. I did a manual partition and basically forgot all the on what sda my /boot partition is. My installation worked out just fine and I tried to install updates with it. After a while I when I wanted to boot to windows it showed that I was missing a "hal.dll" file. I've fixed this problem using the windows resource CD but then after booting up my PC it went straight to Windows XP. I've tried to manually reinstall Grub2 using a Live CD/USB and it worked but I think I have installed in on a different "sda#" (sda5 to be exact) because even though Grub2 loads when I boot my PC, only windows XP shows up as my OS and Ubuntu 11.10 is missing. Now, I've tried installing boot-repair to solve my problems using Live CD/USB. Boot-repair tells me that boot configuration was successful but then a basic grub interface shows up (the black one with a command line grub showing up. Now I can't even boot to Windows XP. Any help would be really appreciated. BTW here's the notes from boot repair that I was asked to save: http://paste.ubuntu.com/890228/ As you can see there are boot files on sda5 and sda7. I think that's the core problem that I have right now. Thanks in advance!

  Read the article

• All files gone after running fsck. How can I recover my files?

  - by cinlung

  I am a newbie in Linux. So this is my story I installed Ubuntu server 10.04lts. It worked great for many months, until today i decided to run fsck on the system partition and although it warned me, I kept pressing yes and now it will only boot into grub prompt. So i read some article and tried grub reinstall. But before performing grub reinstall, i decided to run fsck again from Ubuntu 10.04 lts for desktop live CD. The fsck painfully passes, now my drive is recognized as ext4 system and I am able to mount it again. However, all i can see is just boot directory and lost&found. I tried to perform grub reinstalling by doing grup-install stuff, now my grub is still not loading right, my files are missing, and the weird thing is that the amount I found used by boot and lost n found is only 5gb and the amount used in he hdd is 8 gb. So my files must be somewhere in the hdd. Is there any sinple way maybe a windows tool or something yo recover my files? I only need to retrieve my database backup and everything else can go. I am freaking out here. Please help.

  Read the article

• How to connect to my own WiFi using Broadcom STA drivers?

  - by Chris

  I'm trying hard to switch to Linux from Windows because of my engineering project. Unfortunately, everything is against that change! Before I have installed Broadcom STA proprietary drivers, I was seeing on NetworkManager and nm-applet only local radio-internet-access networks. After I installed Broadcom STA, I see my neighbor's wireless network (channel 11, WEP) Neither before nor after the installation is own wireless network available. Computer: Asus Lamborghini VX6 Ubuntu: 12.04 LTS 64-bit Router: ASUS N55U (A1) with newest AsusWRT firmware Network: Channel 5 (tried also 10 and 11, both on 20 and 40MHz bands), WPA2 Personal, 2,4 + 5 GHz (what is not very important, 'cause the wlan card in VX6 is only 2,4GHz). Network works fine on Windows, also through D-Link repeater on the other floor. Unfortunately, same network is invisible to Ubuntu on same machine. I have tried some combinations with other GUIs but it did not work. Are there any better drivers for Ubuntu? I need that network badly, but I'm an Ubuntu newbie, so I don't know how to solve that problem. Please help.

  Read the article

• Google is re-indexing pages after redirecting URLs from HTTP to HTTPS incorrectly

  - by SLIM

  I upgraded my site so that all pages have gone from using HTTP to HTTPS. I didn't consider that Google treats HTTPS pages differently than HTTP. I recreated my sitemap to so that all links now reflect the new HTTPS URLs and let it be for a few days. (Whoops!) Google is now re-indexing all the HTTPS pages. I have about 19k pages on the site, and Google has already indexed about 8k of the new HTTPS pages. The problem is that Google sees all of these as brand new pages when many of them have a long HTTP history. Of course most of you will recognize the problem, I didn't set up a 301 from the old HTTP to the new HTTPS URLs. Is it too late to do this? Should I switch my sitemap back to HTTP URLs and then 301 redirect to the new HTTPS URls? Or should I leave the sitemap as is, and setup 301 redirects anyway... I'm not even sure if Google is trying to reach the HTTP site anymore. Currently the site is doing 303 redirects (from HTTP to HTTPS), although I haven't figured out why yet.

  Read the article

• UnsatisfiedLinkError: no swt-gtk-4233

  - by Abogical

  I'm a Java newbie who just a made a simple Java program using SWT for GUI via eclipse Juno. The code was working and the program was able to run inside eclipse, so I compiled it and made it a runnable jar file so it can be run outside eclipse. I tried to run it using the terminal and this error came up. Exception in thread "main" java.lang.UnsatisfiedLinkError: Could not load SWT library. Reasons: no swt-gtk-4233 in java.library.path no swt-gtk in java.library.path Can't load library: /home/abody/.swt/lib/linux/x86_64/libswt-gtk-4233.so Can't load library: /home/abody/.swt/lib/linux/x86_64/libswt-gtk.so at org.eclipse.swt.internal.Library.loadLibrary(Library.java:331) at org.eclipse.swt.internal.Library.loadLibrary(Library.java:240) at org.eclipse.swt.internal.C.<clinit>(C.java:21) at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:63) at org.eclipse.swt.internal.Converter.wcsToMbcs(Converter.java:54) at org.eclipse.swt.widgets.Display.<clinit>(Display.java:133) at Class1.main(Class1.java:12) So now it looks like it can't find "libswt-gtk-4233.so" and the other file. However, when I took a look at he ".swt" folder I had an "libswt-gtk-3740.so" not 4233. So its trying to find a file that is more up-to-date. So what does that mean, should I update SWT? what's going on?

  Read the article

• Is Akka a good solution for a concurrent pipeline/workflow problem?

  - by herpylderp

  Disclaimer: I am brand new to Akka and the concept of Actors/Event-Driven Architectures in general. I have to implement a fairly complex problem where users can configure a "concurrent pipeline": Pipeline: consists of 1+ Stages; all Stages execute sequentially Stage: consists of 1+ Tasks; all Tasks execute in parallel Task: essentially a Java Runnable As you can see above, a Task is a Runnable that does some unit of work. Tasks are organized into Stages, which execute their Tasks in parallel. Stages are organized into the Pipeline, which executes its Stages sequentially. Hence if a user specifies the following Pipeline: CrossTheRoadSafelyPipeline Stage 1: Look Left Task 1: Turn your head to the left and look for cars Task 2: Listen for cars Stage 2: Look right Task 1: Turn your head to the right and look for cars Task 2: Listen for cars Then, Stage 1 will execute, and then Stage 2 will execute. However, while each Stage is executing, it's individual Tasks are executing in parallel/at the same time. In reality Pipelines will become very complicated, and with hundreds of Stages, dozens of Tasks per Stage (again, executing at the same time). To implement this Pipeline I can only think of several solutions: ESB/Apache Camel Guava Event Bus Java 5 Concurrency Actors/Akka Camel doesn't seem right because its core competency is integration not synchrony and orchestration across worker threads. Guava is great, but this doesn't really feel like a subscriber/publisher-type of problem. And Java 5 Concurrency (ExecutorService, etc.) just feels too low-level and painful. So I ask: is Akka a strong candidate for this type of problem? If so, how? If not, then why, and what is a good candidate?

  Read the article

• Branding/Restricting a Software by License/Serial

  - by Sid

  I have made a POS System for a client of mine using MS Access Server-Client approach. He asked me to brand his software to allow only a certain "number" of users (cashiers) to access the POS System, and must be determined to the license his client will buy. EX: 10 User License = 10 Cashiers ( not necessarily 10 users, it can be 30 users, shifting) = it means 10 PCs will be installed with the client software I made. How and where do I put the logic that will determine if it is licensed or not. What I have done: I have created a serial key generator using Name. Problem is it can be duplicated once you give than name+serial combination, it would still work. I am counting the number of users logged at a time. This could be problematic as I am using MSAccess and not MSSQL. I have scrapped this idea, He also asked me if I could just put serial+mac address combination. That I could do but he will have a hard time implementing it and selling it if he needs the mac address of every computers to be installed with my POS. I am at lost on what can I do. Would like to ask for tips and suggestions. Thank you.

  Read the article

• How do I debug xorg/fglrx related system freezes on Ubuntu 12.10?

  - by racerror

  My brand new system is randomly freezing and I don't know how to debug the issue. System: AMD A10-5800k Asus F2A85-M motherboard Integrated Radeon HD 7660D 8gb Samsung ddr3 1600 Ubuntu 12.10 Gnome shell / Unity (issue exists in both) xorg.conf (relevant parts): Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" BusID "PCI:0:1:0" Option "TexturedVideoSync" "on" Option "UseFastTLS" "2" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" Monitor "Monitor0" DefaultDepth 24 Option "UseEDID" "False" Option "ExactModeTimingsDVI" "True" Option "NoBandWidthTest" "true" Option "ModeValidation" "AllowNon60hzmodesDFPModes, NoEDIDDFPMaxSizeCheck, NoVertRefreshCheck, NoHorizSyncCheck, NoDFPNativeResolutionCheck, NoMaxSizeCheck, NoMaxPClkCheck, NoEDIDModes" Option "UseEDIDDPI" "False" Option "UseEDIDFreqs" "0" Option "NoLogo" "True" Option "Coolbits" "1" Option "metamodes" "DFP-0: 2560x1440_60 +0+0" SubSection "Display" Depth 24 Modes "2560x1440" EndSubSection I ran memtest on my ram and it checks out fine. I have tried using the latest fglrx and fglrx-beta. I have loaded 3.6.x kernel. I do not see anything relevant in dmesg, kern.log, syslog, .xsession-errors or Xorg.log. I cannot ssh into the machine when frozen from another machine. I know that system resources not being stressed when the crashes happen. It seems that video and any gaming (very simple graphics games) contribute to the freezes most frequently. However, I have experienced the crash before when just using Chrome. I suspect the crashes are xorg/fglrx related, but I have no evidence to back that up. Where should I look? What should I grep for? What should I try next?

  Read the article

• How do I partition my Hard drive to install Kubuntu?

  - by Xdflames

  I am a complete newbie to partitioning and I would like some guidance here. Can anyone explain what exactly I should be doing here? I am installing Kubuntu 12.04 on a currently Windows 7 laptop. My current Partitions say this: /dev/sda /dev/sda1 ntfs 104 MB 35 MB /dev/sda2 ntfs 319965 MB 87164 MB Basically, what I want is some guidance on what exactly to do here. All I want is a partition for my OS (Which will be Kubuntu 12.04) and a partition for all of my data. I also want to restart fresh with my hard drive, with only what I mentioned on here. I am installing Kubuntu from a flash drive (I set it up as a bootable device with Universal-USB-Installer-1.9.0.9), as I do not have any blank CDs/DVDs to burn to. What should I name my partitions? What should I set the type as? What size do they need to be? Edit: My hard drive is 320GB. Just looked it up in my BIOS. This computer will mainly be used for internet browsing and overall just messing around with the Linux OS.

  Read the article

• Creating Engaging Online Experiences is Easy and Intuitive for Marketers with Oracle WebCenter Sites 11g

  - by Christie Flanagan

  Last month, we announced the availability of Oracle WebCenter Sites 11g, the latest release of our web experience management solution. This new release is really geared toward enabling marketers and business users to drive customer acquisition and brand loyalty by simplifying the whole process of creating, managing and optimizing engaging online experiences.  To show you just how this works, we’ve created the video below which takes you through the tasks a typical marketer might execute using Oracle WebCenter Sites to manage their online presence -- everything from page editing to page creation, right on through to optimizing the mobile experience and moderating user-generated comments and reviews is covered here. I hope this video has give you a flavor for just how easy and intuitive it is for marketers and other business users to manage engaging and interactive online experiences using Oracle WebCenter Sites.  To see more about the new release, please check out the recording of our launch webcast. On Demand Webcast - Introducing Oracle WebCenter Sites: Transforming the Online Experience Enabling marketers and business users is a key requirement for creating and managing contextually relevant, social, and interactive online experiences. Oracle WebCenter Sites transforms the online experience into one that is simple and intuitive to manage as a content contributor, encourages interaction between site visitors and their social networks, and provides marketers with automated targeting options for optimizing online engagement. View this webcast now to learn more.

  Read the article

• What do I need to learn to decide on rename/recompile source package names because of company rebranding?

  - by Roberto Linares

  My company is currently at a rebranding process and the brand names have been used in the sources' package names but these names are only visible to developers who maintain this code so nobody from project management is really interested in changing them considering also that it would imply the recompiling of several old components. What factors do I need to consider when deciding on a change like that? I don't know if I should worry about legal issues or not and if so, how to address this with project management. More background details. I have all the sources and dependencies but since the company rebranding, other development areas have adopted some of the code that needs package name-changing so I cannot take the decision only by myself so I don't make everyone else's code to crash with my core components and I cannot change other areas' code without the permission of those areas' users so yes, my concern is more political than technical. I am going try to coordinate the involved it areas to make the change anyway, since it seems to be the best approach.   Unfortunatelly in my company there's no continuous integration build server so we build our code manually on demand and to get something to production I have to justify the change (even just the package name changing) to QA with an user requirement and some other bureaucratic documentation so that's why I was hesitating the change in first place.

  Read the article

• How do I get a Dell Latitude e6420 working?

  - by David_G

  I've just installed Ubuntu 12.04 (64-bit) on a brand new Dell Latitude e6420, and I'm having a few problems. This laptop has an Optimus (?) setup - i.e. integrated gfx and an Nvidia Quadro NVS 4200M. First problem - I ran setup, etc, and discovered that I can only run unity2d - If I try and login with unity3d, it just defaults to 2d. This is with nvidia-current installed (302.07). Note also that I can't run nvidia-settings ("You do not appear to be using the NVIDIA X driver."), and there is no additional drivers found ("No proprietary drivers are in use on this system"). I tried to troubleshoot this, and removed nvidia, leaving (I guess) just Nouveau drivers - In that case, unity3d did work, but I was stuck with the open source Nouveau drivers powering the integrated graphics. So, obviously, I want to run unity3d, and be using the more powerful Nvidia graphics card. I've tried a bit of tinkering around, but I'm not sure the best way to proceed, or perhaps more importantly, I'm not sure of what the best final solution might be. I've heard about bumblebee - but frankly, I would prefer to have the proprietary Nvidia drivers working properly. Any help would be much appreciated!

  Read the article

• Interesting fault attempting to install Ubuntu 12.0.4.3 OR 13.10 on MSI GS70 2OD-001US

  - by cjaredrun

  Attempting to install Ubuntu on an MSI GS70 2OD-001US notebook pre-installed with Windows 8. For the record this is what I have attempted: All cases were attempted with Ubuntu 12.0.4.3 AND 13.10 images via USB drives Case 1 - Attempt no changes and simply boot from USB Result: It seems to want to work initially. The Ubuntu logo pops up and the dots start moving. After a few seconds the dots freeze and this screen is shown: http://i.imgur.com/C7pyMRk.jpg Case 2 - Start playing with BIOS - In Windows turning off fast boot - In BIOS turning off Secure boot - In BIOS turning off UEFI and selecting LEGACY Result: Brought to a black screen with a - blinking at me. Case 3 - Alternating BIOS settings - In Windows turning off fast boot - In BIOS turning off Secure boot - in BIOS turning off UEFI and selecting UEFI with CSM Result: Brought to a black screen no other indication of change. It's pretty frustrating to feel locked out of a laptop that I have paid good money for, I'm sure I am not alone in that case. It does however appear that there has been some success, so I am hopeful that someone might be able to help me. FYI: Dual booting is not necessary for me, if that helps at all... I'm not sure if this is a reasonable option, but if I completely wipe clean the hdds, no particle of Windows at all, would this still be a problem? Also would opening up the laptop and replacing the HDDS with brand new ones be a solution as well? Thanks for any input or suggestions.

  Read the article

• 11/28 Thought Leaders Webinar: Marketing Strategies for Great Customer Experiences

  - by Charles Knapp

  With the growing use of mobile and social, it's tempting to bolt on these new channels to existing processes. However, that piecemeal approach may not lead to satisfying customer experiences or solid returns on investments. Furthermore, the volume of information businesses have access to is growing exponentially. Is this leading to better business insight and customer experiences? Join the Internet Marketing Association, The University of California at Irvine, and Oracle as we discuss marketing strategies that will help your customers have better experiences with your brand. You'll learn effective strategies for harnessing the power of "big data" to know more and understand your customers better, empowering customers and employees to make every interaction easy and rewarding, and adapting the customer experience to connect and engage effectively with each customer. Our speakers are Melissa Boxer, Vice President of Product Strategy, Oracle Cloud and CX Applications, who is a conference keynote speaker on integrated social marketing and loyalty analytics, and Dean Abbott, CEO of Abbott Analytics, who is a thought leader in commercial predictive analytics. This learning opportunity takes place on Wednesday, November 28, 11 am to 12 pm Pacific. Register today to learn from these thought leaders.

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >