Search Results

Search found 5655 results on 227 pages for 'cd smith'.

Page 90/227 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• What does the the reconstruction process of mdadm do exactly on raid10

  - by Azrael

  I've got a system with 4 disks set up as raid10. All disks are usable, and mdadm all states them with UUUU. Due to a recent system crash, the raid is currently reconstruction the raid as it was marked as "not clean," and a reconstruction process was started. On a closer look smartctl shows problems on one disk: sd 0:0:0:0: [sda] Unhandled sense code sd 0:0:0:0: [sda] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE sd 0:0:0:0: [sda] Sense Key : Medium Error [current] [descriptor] Descriptor sense data with sense descriptors (in hex): 72 03 11 04 00 00 00 0c 00 0a 80 00 00 00 00 00 24 cd 78 d4 sd 0:0:0:0: [sda] Add. Sense: Unrecovered read error - auto reallocate failed sd 0:0:0:0: [sda] CDB: Read(10): 28 00 24 cd 75 1e 00 04 00 00 With a research about the reconstruction process, I only found information concerning raid5 but nothing for raid10. Can I replace this problematic disk during the reconstruction process, or will I kill the raid with this?

  Read the article

• Blank screen after grub menu

  - by Tim

  I just rebooted an Ubuntu Server 10.04. After choosing boot options in the grub menu, though, it just displays a black screen with the blinking white underscore in the upper-left corner. The machine has had (hardware) trouble with networking before, but the problem remains after 10 minutes, so I don't think it's the problem now. Booting into recovery mode or using earlier kernels yields the same problem. This also happens if I boot from another hard-drive. I haven't yet tried to boot from CD as the machine lacks a CD reader. How should I diagnose the problem? Update: My boot options are: recordfail insmod ext2 set root='(hd0,1)' search --no-floppy --fs-uuid --set 567[redacted] linux /boot/vmlinuz-2.6.32-29-generic root=UUID=567[redacted] ro quiet splash initrd /boot/initrd.img-2.6.32-29-generic Update: Also, I cannot access the virtual terminals (ctrl+alt+Fn).

  Read the article

• Debian 5.0.8 won't detect my ethernet adapter

  - by PaulH

  I'm installing Debian 5.0.8 on a Dell Latitude E6410 using the network install x86 CD. Unfortunately, it won't detect my Ethernet adapter. Specifically, I get the error: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list. lspci shows: 00:19.0 Ethernet controller: Intel Corporation Device 10ea (rev 05) That should correspond to the e100e driver. But, if I select it from the list, the install CD still fails to detect it. Ubuntu 10.10 and Windows 7 are able to use this device with no problem. Does anybody know what I can do to make Debian use my Ethernet adapter? Thanks, PaulH

  Read the article

• DBD::CSV: Append-extension-question

  - by sid_com

  Why does only the second example append the extension to the filename and what is the "/r" in ".csv/r" for. #!/usr/bin/env perl use warnings; use strict; use 5.012; use DBI; my $dbh = DBI->connect( "DBI:CSV:f_dir=/home/mm", { RaiseError => 1, f_ext => ".csv/r"} ); my $table = 'new_1'; $dbh->do( "DROP TABLE IF EXISTS $table" ); $dbh->do( "CREATE TABLE $table ( id INT, name CHAR, city CHAR )" ); my $sth_new = $dbh->prepare( "INSERT INTO $table( id, name, city ) VALUES ( ?, ?, ?, )" ); $sth_new->execute( 1, 'Smith', 'Greenville' ); $dbh->disconnect(); # -------------------------------------------------------- $dbh = DBI->connect( "DBI:CSV:f_dir=/home/mm", { RaiseError => 1 } ); $dbh->{f_ext} = ".csv/r"; $table = 'new_2'; $dbh->do( "DROP TABLE IF EXISTS $table" ); $dbh->do( "CREATE TABLE $table ( id INT, name CHAR, city CHAR )" ); $sth_new = $dbh->prepare( "INSERT INTO $table( id, name, city ) VALUES ( ?, ?, ?, )" ); $sth_new->execute( 1, 'Smith', 'Greenville' ); $dbh->disconnect();

  Read the article

• USB-keyboard & mouse powered off in windows-7

  - by sinned

  I have a problem with a pc where usb devices are not getting any power as soon as windows starts up (it works in preboot). This pc has no ps/2, so there is no chance for input, also not in secure boot mode. I "tidied up" using sysinternals autostart, so there is a chance I messed something up here, although I'm quite sure I only deleted some old printer drivers from autostart. I do not know how to reset this, I cant even log in because there is no input possible. I could use a linux live cd, but I don't know what to do there because there is no sysinternals from linux into a not running windows... To make things even worse, I have the windows installation completely encrypted with truecrypt, so I haven't even tried windows recovery cd yet. There is no loss of data since I can access the disc with a live-linux, I only want to use it again without resetting up everything. Any suggestions?

  Read the article

• Desktop directory disappears in gnome-terminal, then appears again, but all files in it are deleted

  - by Ingen

  I am able to see my Desktop and with all its various links and files. But in the terminal when I try to access the Desktop directory: cd ~/Desktop I get: bash: cd: /home/administrator/Desktop: No such file or directory Then I find I am unable to access any of the files on the Desktop when I click on them although the file icons are there. Then the icons disappear after my clicking on them. Then I am able to access the Desktop directory in the terminal but the directory is empty i.e. all the files/folders have been deleted. What's going on? How can I fix this?

  Read the article

• how do I use tar -C on Snow Leopard when creating an archive ?

  - by ssc

  The man page states -C directory In c and r mode, this changes the directory before adding the following files. However, tar does not change to the directory I specify, but instead reports tar: <folder name>: Cannot stat: No such file or directory for every folder in the directory I run the tar command in. Do I really have to do something like cd <folder> && tar ... && cd - or is there a way to get this work ?

  Read the article

• Computer doesn't boot, continuously restarts; possible disk error

  - by Olcay Ertas

  I have shut down my computer two hours ago. When I open my computer it started restarting itself after showing the POST screen. I can open my computer with a Ubuntu Live CD or Windows installation CD. I can also open and boot my computer with my second drive, so I think something is wrong with my primary hard drive. Do you have any idea what the problem might be and how can I fix it? I am using an HP DV9087EA laptop and my primary disk is a WD500GB. I have installed Ubuntu 10.10 and Windows 7 on my drive.

  Read the article

• Can a power loss break an hard disk?

  - by dag729

  Today I was working when all of a sudden a power loss (in the entire house) occurs. I tried to reboot the machine but it states that there's an "Ebios error"; tried with an Ubuntu 9.04 live cd and while booting it states that there are various I/O errors on the first partition (the one with the boot sector). Now I managed to backup all of my data (using the live cd aforementioned) but I don't know if it'll worth the hassle of a reinstallation (and if it could do something useful) or if the only thing to do is to drop the hard disk as far as possible... Thanks in advance.

  Read the article

• PHP: Use a string as an array index path to retreive a value.

  - by Charles

  Say I have an array like: Array ( [0] => Array ( [Data] => Array ( [id] => 1 [title] => Manager [name] => John Smith ) ) [1] => Array ( [Data] => Array ( [id] => 1 [title] => Clerk [name] => ( [first] => Jane [last] => Smith ) ) ) ) I want to be able to build a function that I can pass a string to that will act as the array index path and return the appropriate array value without using eval(). Is that possible? function($indexPath, $arrayToAccess) { //$indexPath would be something like [0]['Data']['name'] which would return //"Manager" or it could be [1]['Data']['name']['first'] which would return //"Jane" but the amount of array indexs that will be in the index path can //change, so there might be 3 like the first example, or 4 like the second. return $arrayToAccess[$indexPath] <-obviously wont work }

  Read the article

• formating a hard drive for use in an asus aspire one d250

  - by paynes_bay

  I have an Asus Aspire One D250 that's out of warranty and whose hard drive is giving the click of death. I'm trying to use a spare SATA HDD I have but am having some difficulty. I have a USB CD drive that I plugged into the computer but when I tried to boot off of a Windows XP SP3 install CD the hard drive wasn't recognized. I tried to format the hard drive in another computer and then plug the hard drive into the Asus Aspire and although this gets me to the Windows XP loading screen it crashes before it gets into Windows, itself. Even in Safe Mode. I also tried to install Windows XP off of a USB stick but it seemed to hang during the install process. As in the next day it was still in the blue screen installer. Any ideas?

  Read the article

• Getting error while starting tomcat?

  - by ram

  For my Tomcat installation process case is 1. cd /home/mpatil/Downloads/ 2. tar zxvf apache-tomcat-6.0.37.tar.gz 3. cd apache-tomcat-6.0.37/bin 4. ./startup.sh 5. tail -f /home/mpatil/Downloads/apache-tomcat-6.0.37/logs/catalina.out for `5` command results : [root@localhost bin]# tail -f /home/mpatil/Downloads/apache-tomcat-6.0.37/logs/catalina.out Nov 08, 2013 12:04:04 PM org.apache.catalina.startup.HostConfig deployDirectory INFO: Deploying web application directory docs Nov 08, 2013 12:04:04 PM org.apache.coyote.http11.Http11Protocol start INFO: Starting Coyote HTTP/1.1 on http-8080 Nov 08, 2013 12:04:04 PM org.apache.jk.common.ChannelSocket init INFO: JK: ajp13 listening on /0.0.0.0:8009 Nov 08, 2013 12:04:04 PM org.apache.jk.server.JkMain start INFO: Jk running ID=0 time=0/115 config=null Nov 08, 2013 12:04:04 PM org.apache.catalina.startup.Catalina start INFO: Server startup in 3036 ms and i tried in browser like http://locahost:8080/ nothing comming why.whats the wrong in my command or i did any wrong in my commands pls tel me

  Read the article

• Empty DVD Drive indicates it has music in it (CDFS)

  - by Amado Colberg

  I have a Windows 7, 64 bit computer with a Blu-ray DVD drive. When I first start the computer, the DVD drive indicates it has music in it, but it is empty. If I put a CD in it, it will not Autoplay. But, if I open the drive and close it again, it will Autoplay and will no longer act as if it has a music CD in it. I've checked the drive with Plextor Utilities and it says it is working OK. I would appreciate any help with this.

  Read the article

• Stop sending packets to private IPs

  - by SlasherZ

  I have a problem that my server got locked down because it was sending packets to private IPs. My question is, what is the best solution to stop that? Here is the log that I got from my hosting provider: [Mon Jun 2 00:04:36 2014] forward-to-private:IN=br0 OUT=br0 PHYSIN=vm-44487.0 PHYSOUT=eth0 MAC=78:fe:3d:47:3d:20:00:1c:14:01:4e:cd:08:00 SRC=78.46.198.21 DST=192.168.249.128 LEN=1454 TOS=0x00 PREC=0x00 TTL=64 ID=58859 DF PROTO=UDP SPT=41366 DPT=41234 LEN=1434 [Mon Jun 2 00:17:15 2014] forward-to-private:IN=br0 OUT=br0 PHYSIN=vm-44487.0 PHYSOUT=eth0 MAC=78:fe:3d:47:3d:20:00:1c:14:01:4e:cd:08:00 SRC=78.46.198.21 DST=192.168.249.128 LEN=1456 TOS=0x00 PREC=0x00 TTL=64 ID=52234 DF PROTO=UDP SPT=55430 DPT=41234 LEN=1436

  Read the article

• Rebuilding RAID1 in Ubuntu

  - by John Utech

  I had my second HD in my RAID1 come up with bad sectors. So I got another drive and pulled out the bad sector drive and put the new drive in. With the original working RAID1 drive in the computer it failed to boot. I manually copied everything from the old drive over via a Gparted Live CD. Still no booting. Kind of scratching my head here as I can see that both of the drives have data on them but are unable to get either of them to boot. I used a Ubuntu live CD and couldn't even manually mount either of the drives, which I thought was really the odd part. Not sure where to go from here.

  Read the article

• SATA Devices not showing up when in UEFI mode

  - by Dan Barzilay

  I'm trying to install Windows and the bios should be set to UEFI mode. The problem is that all SATA devices aren't showing up (shows as if there aren't any) so I can't boot from the installation CD (it's just not there). The weird thing is that when set to LEGACY mode they all show up.. SATA mode is set to AHCI and I'm on Lenovo Y510P. I have a Linux OS installed that is accessible only when BIOS is in LEGACY mode (otherwise the hard drive it's on is not available) I also tried reseting the BIOS settings which didn't help.. Comment please if more details needed Extra details: Computer model: Lenovo IdeaPad Y510P (not overcloacked) Installed Linux OS version: Linux 3.7-trunk-amd64 x86_64 Trying to install Windows: Windows 7 Ultimate 64bit BIOS Information: Vendor: LENOVO Version: 74CN26WW(V1.07) Update: Using user1608638 answer and suggestion of using the USB flash drive as the boot device instead of the CD/DVD method I succeeded in installing Windows 7! (Thanks alot user1608638)

  Read the article

• `wget` is not recognized or either can't find the file

  - by clankill3r

  if i use cd C:\Program Files (x86)\GnuWin32\bin then i'm able to use wget commands for example: wget http://www.ultralightnews.com/trikes/images/trikes/dfs-singletrike.jpg but i can't find the file back, i looked in c:\ and in the bin folder mentioned above and in GnuWin32\etc If i try wget -O C:\Users\clankill3r\Downloads\wgetfolder wget http://www.ultralightnews.com/trikes/images/trikes/dfs-singletrike.jpg then it says Permision denied, i did allow all permisions possible for every group / user. Some people say it downloads to the current folder your working in (that's why i looked in the bin). But i thought let's try to run the command from another folder so i used: 'cd C:\Users\clankill3r\Downloads\wgetfolderand then the wget comman but then it says thewget` command is not recognized. can someone help?

  Read the article

• flush XML tags having certain value

  - by azathoth

  Hello all I have a webservice that returns an XML like this: <?xml version="1.0" encoding="UTF-8"?> <contractInformation> <contract> <idContract type="int">87191827</idContract> <region type="varchar">null</region> <dueDate type="varchar">null</dueDate> <contactName type="varchar">John Smith</contactName> </contract> </contractInformation> I want to empty every tag that contains the string null, so it would look like this: <?xml version="1.0" encoding="UTF-8"?> <contractInformation> <contract> <idContract type="int">87191827</idContract> <region type="varchar"/> <dueDate type="varchar"/> <contactName type="varchar">John Smith</contactName> </contract> </contractInformation> How do I accomplish that by using XSLT?

  Read the article

• Display data FROM Sheet1 on Sheet2 based on conditional value

  - by Shawn

  Imagine a worksheet with 30 pieces of information, such as: A1= Start Date A2 = End Date A3 = Resource Name A4 = Cost .... A30 = Whatever B1 = 1/1/2010 B2 = 2/15/2010 B3 = Joe Smith B4 = $10,000.00 ... B30 = Blah Blah Now imagine a third column, C. The purpose of the third column is to determine WHICH report that row of data needs to appear in. C1 = Report 1 C2 = Report 1 and Report 2 C3 = Report 4 and Report 7 C4 = Report 1 and Report 5 ... C30 = Report 2 Each report is on Sheets 2, 3, 4, 5 and so on (depending on how many I decide to create). As you can see form my example above, some data may need to appear in multiple reports. For example, the data in Row 3 (Resource Name: Joe Smith) needs to appear in Report 4 and Report 7. That is to say, it needs to DYNAMICALLY appear on two additional worksheets. If I change the values in column C, then the reports need to update automatically. How can I create the worksheets which will serve as the reports such that they only diaplay the rows which have been "flagged" to be displayed in that report? Thanks!

  Read the article

• Windows boot iso file without press any key

  - by gln

  I'm trying to make an iso file which will boot without any key-press from the user. In Windows iso files, when booting from a cd, there is a message "press any key to boot from cd" which will wait for 5-10 seconds and then, if there is no key-press, it will boot from HD. I searched the web for how to remove this message, and do not press any key and all the answers were "delete bootfix.bin" from the iso. I edited the iso (I've tried several iso files) to remove the bootfix.bin, but now the iso is not correct. Do you have any suggestions?

  Read the article

• why can’t I see my Hardrive for my compaq mini 110c from A windows Xp installation on usb stick?

  - by sludog1

  I have a Compaq mini 110c-1100dx and I'm having a terrible time trying to reinstall windows. I dont have a external CD drive and REALLY dont want to pay HP 200bux for one. so, I've been TRYING to reinstall WinXP from a flashdrive and I have it to the point where the XP installation gets past the Agreement, but then the netbooks hard drive is not showing up, it's jus giving me the option to install WInXP onto the flash drive, registering as C:. I've tried using nLite to add extra drivers to the WinXP "cd" but I dont think I have the correct HD drivers and I am stuck. ANY help at all be great

  Read the article

• Is there Linux Live USB that works with Snow Leopard macbook pro from 2010 april

  - by rofrol

  Hello, I was searching for a long time a Linux Live USB that I can boot my macbook pro from. Is there such distro so I can install it on Snow Leopard or Windows 7? UPDATE I've found this: "isohybrid" CD images (..) are special in that as well as the normal CD-based ISO9660 filesystem they also contain a valid-looking DOS-style partition table. Thus, if you simply copy one of these images raw to a USB stick a normal PC BIOS will boot the image directly. (...) Finally: I'd like to add support into xorriso for creating the nasty HFS hybrid images that are needed for booting Macs. The code that does this in cdrkit is probably some of the worst that I've ever worked with, and I'd like to get away from it. If only Apple hadn't stupidly built their proprietary platform around this shit and had used open standards instead Source

  Read the article

• Black screen with cursor after BIOS screen

  - by Radio

  Here is a weird one, Got computer with Windows XP. It's getting stuck on a black screen with cursor blinking. What did I do: - Boot from installation CD (recovery option - command line): chkdsk C: /R copy D:\i386\ntdetect.com c:\ copy D:\i386\ntldr c:\ fixmbr fixboot Chkdsk showed 0 bad sectors and no problems during scan. dir on C:\ shows all directories and files in place (Windows, Program Files, Documents and Settings). BIOS shows correct boot drive. Still does not boot. Not sure what to think of. Please help. UPDATE: Just performed these steps: Backed up current disk C: (without MBR) using True Image to external hard drive Ran Windows XP clean installation with deleting all partitions and creating new one. Hard drive booted fine into Windows GUI installation!!! Then: I interrupted installation. Booted from True Image recovery CD and restored archive of disk C to an new partition. Same issue with black screen.

  Read the article

• A MongoDB find() that matches when all $and conditions match the same sub-document?

  - by MichaelOryl

  If I have a set of MongoDB documents like the following, what can I do to get a find() result that only returns the families who have 2 pets who all like liver? Here is what I expected to work: db.delegation.find({pets:2, $and: [{'foods.liver': true}, {'foods.allLike': true}] }) Here is the document collection: { "_id" : ObjectId("5384888e380efca06276cf5e"), "family": "smiths", "pets": 2, "foods" : [ { "name" : "chicken", "allLike" : true, }, { "name" : "liver", "allLike" : false, } ] }, { "_id" : ObjectId("4384888e380efca06276cf50"), "family": "jones", "pets": 2, "foods" : [ { "name" : "chicken", "allLike" : true, }, { "name" : "liver", "allLike" : true, } ] } What I end up getting is both families because they both have at least one food marked as true for allLike. It seems that the two conditions in the $and are true if any foods sub-document matches, but what I want is the two conditions to match for the conditions as a pair. As is, I get the Jones family back (as I want) but also Smith (which I don't). Smith gets returned because the chicken sub-doc has allLike set to true and the liver sub-doc has a name of 'liver'. The conditions are matching across separate foods sub-docs. I want them to match as a pair on a foods document. This code is not the real use case, obviously. I have one, but I've simplified it to protect the innocent...

  Read the article

• How to repair Windows XP Installation HDD from another PC?

  - by Matt

  My friend gave me his HDD that has Windows XP Pro installed on it to try and fix it. I don't have the XP CD to repair it, but I do have the ISO. I suppose I could always burn it.. but that's a lot of trouble because I don't have any blank CD's. I plugged it into my PC's hot-swap drive bay, and I have Daemon tools. Is there anyway I can try to repair the XP installation on this HDD from my PC without booting from it and burning my ISO?

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >