Search Results

Search found 3061 results on 123 pages for 'sata hdd'.

Page 90/123 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• Is it possible create a 4TB bootable partition in the x86 edition of Windows Server 2003 Enterprise?

  - by Giffyguy

  I'd like to find out if there is any way to accomplish this, since it would benifit my storage server greatly. I am using a Promise FastTrak 8660 and five Seagate ST31000340NS 1TB drives in a RAID 5 array. I figure that if the x86 ENTERPRISE edition of Server 2003 can handle 64GB of RAM, it should have no problem supporting larger HDD volumes as well. I've read (somewhere...) that the Windows Server operating systems are not limited to the standard 2TB like Windows XP and 2000 are. I'm hoping it's something that just needs to be turned on, similar to the way PAE works for the 4GB RAM limit in x86 servers.

  Read the article

• Windows 7 setup can not find hard disk

  - by Akshay Kulkarni

  Previously I had an old Seagate barracuda 160GB HDD which got crashed some days before. Yesterday I bought new Hard Disk Seagate Barracuda 500GB (ST500DM002). I just replaced the 500GB hard disk with 160GB one leaving data and power cable intact and untouched. And ideally this new hard disk should start functioning. I tried to install Windows 7 with DVD the setup says you don't have any hard disks installed on your machine. I rechecked connection tried with Win XP setup but continued receiving same error. Do I need to do some initialization stuff with hard disk before installing setup? If so how to do it. If not then is there any problem with my newly bought hard disk? Thanks In Advance.

  Read the article

• Unable to Boot from USB External Hard Drive

  - by Josh Stodola

  I recently upgraded my main development machine to Windows 7. This involved wiping out my primary boot drive (Windows XP 64-bit) and starting clean. Before I wiped it, I did a direct disk-to-disk copy to a big external hard drive I have. While I have been able to migrate most of the necessary files without any problems, I was wanting to boot from it today to check a few settings. I plugged in the hard drive, rebooted, changed the BIOS to boot from USB-HDD first. But, no mattter what I do, it always boots from my primary drive to Windows 7. I do not see any kind of error message or anything. How can I boot to Windows XP 64-bit on this external hard drive?

  Read the article

• where are flash settings stored locally on Ubuntu

  - by Joseph Mastey

  It's possible change flash settings on your computer at this URL: http://www.macromedia.com/support/documentation/en/flashplayer/help/settings_manager03.html However, given that Macromedia has no problems setting LSO cookies on your HDD that you cannot find, I am a little bit skeptical that the settings I've tweaked there would be saved. So, I'd like to be able to look locally on my PC and verify the settings. Where can I find the settings for Flash locally? Surely the plugin cannot be heading to Macromedia itself for them (that is a future too bleak to contemplate). I am running Ubuntu 10.04. Thanks, Joe

  Read the article

• OEM Office 2010 without media - how to reinstall?

  - by Bryan

  I have recently purchased a new office desktop PC from Dell with OEM version of Windows 7 Pro and Office 2010 Pro. One of the reasons I always use Dell is that they always supply installation media CDs or DVDs, unlike some other companies that just give you ISO images on the hard disk that you have to burn yourself. This is the first PC I have purchased with Office 2010 Pro (OEM), and I was disappointed to see that Dell don't ship out any installation media for office 2010, they just supply a piece of card with the office pro product key printed on it. If the HDD fails completely and I have to perform a clean installation, how can I re-install office? Can I download the trial version of Office 2010 and install that, then offer it my product key? Bearing in mind that the product key is an OEM product, not a retail product, would this work?

  Read the article

• Triple Boot - With storage partition

  - by art

  I'm new to the multi-boot world, as i used to rely on virtualizing for running linux. Recently i moved to Dual booting Windows 7 and Ubuntu, with a storage partition for all my files where both operating systems could access them. Is it possible, to have 1 partition for 7, another for XP, another for Ubuntu, and a separate partition where the OS's can access my files? so 4 partitions on my hdd. and if there's a better way to go about this (or if its not possible), please let me know! thanks

  Read the article

• How to test KVM guest CPU maximum allocation limit?

  - by Ace

  Running Ubuntu 13.04 Host and vm Guest. Using virtio for hdd, nic. Max-allocaion CPU cores is 6, minimum is 2. Ive made a vm with virt-manager just to play with, and to test out kvm. Alright, I have a decent understand how the memory balloon driver works, but I still dont know how to test if the guest OS can utilize the max setting for cpu cores. From what i gather, the host will start one thread of qemu for each core allocated per vm. When i run htop inside the guest, it only shows two cores. (also here is the output of cat /proc/cpuinfo: https://gist.github.com/anonymous/93a361545130923537da ) How can I "force" the guest to allocate the other 4 cores so that it can show 6 cores in htop? Is there a way to do this?

  Read the article

• How do I diagnose a HP Notebook which has hardware issues?

  - by Rob

  My HP DV6t-2300 recently crashed while using FLV Player. It wouldn't start up after this so I had to do a hardware reset (remove power sources, hold down power button ~15 seconds, put back power sources). After this it would turn on, but start up would freeze in Ubuntu, Windows 7, Ubuntu Recovery Mode, and various Linux Live CDs. The only successful way to boot was in Windows 7 Safe Mode. The HP Customer Service was very polite, but they are trying to blame it on a corrupt operating system which is clearly not the case (since I have tried 4 operating systems and none work). I am thinking it might be the GPU since 1) I was watching movies when it crashed and 2) Windows Safe Mode might not use the dedicated GPU. I already ran Memory and HDD tests and there were no detected errors. Any ideas of what's wrong, or suggestions for tests that I should run in safe mode? Should I try reinstalling Windows 7 to convince HP that it's not the OS?

  Read the article

• Virtual PC lost parent disk for differential vhd

  - by SeeR

  2 years ago I had that brilliant idea to create base Windows XP disk which all of my VM with XP will use. Of course it ended that I had only one VM with XP :-). Today I needed to make some free space on my HDD so I found one not used VM named "Windows XP" which had only 5GB. I deleted it as fast as possible :-) and of course I used shift to not use "Recycle bin". Now when I want to run my XP VM I have following error: "One of the parent hard disks of ... is missing." It's not a problem for me as soon as I can restore files from this differential vhd that I have right now. So: I have differential disk with files I need I don't have parent disk My question is: How can I restore files from this differential hvd?

  Read the article

• Search /usr/local/texlive directory with Spotlight

  - by Teake Nutma

  Having TeXLive installed on my Mac, I frequently need to consult documentation for some of the packages. It seems silly to Google this when I have the PDFs all on my HDD in /usr/local/texlive/2011/texmf-dist/doc , so I want to be able to use Spotlight to search for them. However, I can't get Spotlight to cooperate. I tried mdimport /usr/local/texlive/2011/texmf-dist/doc which then does some work, but afterwards doesn't display any results in Spotlight. I've also added the folder in Alfred's search scope to no avail. Any ideas?

  Read the article

• HP DL380 G5 Predictive Drive Failure on a new drive

  - by CharlieJ

  Consolidated Error Report: Controller: Smart Array P400 in slot 3 Device: Physical Drive 1I:1:1 Message: Predictive failure. We have an HP DL380 G5 server with two 72GB 15k SAS drives configured in RAID1. A couple weeks ago, the server reported a drive failure on Drive 1. We replaced the drive with a brand new HDD -- same spares number. A few days ago, the server started reporting a predictive drive failure on the new drive, in the same bay. Is it likely the new drive is bad... or more likely we have a bay failure problem? This is a production server, so any advice would be appreciated. I have another spare drive, so I can hot swap it if this is a fluke and new drive is just bad. THANKS! CharlieJ

  Read the article

• How to partition hard drive that has no os installed?

  - by Sarang Patil

  I have 500 GB hard drive. The laptop came with windows 7 pre installed in it. Now as I am installing Windows 8, I have deleted the C drive. So I have 460 GB free unused space where I can install Windows 8. But the Windows 8 installer does not give me any option to partition the 460 GB. The only option available are "Refresh" and "Load driver" or just selecting the 460 GB HDD and installing Windows 8 in it. So how can I partition this 460 GB before I install Windows 8 in it? Edit: Can you suggest me some tools that partition the hard drive and RUN independently (as I do not have any OS installed) from a USB ?

  Read the article

• Ubuntu PowerEdge T110

  - by Josh

  I just got a Dell PowerEdge T110 server. I moved the boot order to CD - HDD - NIC, then installed Ubuntu 10.10, Desktop Ed. I chose install alongside other OS (even though there was none), then chose use entire partition. It showed that Ubuntu would use 160 of the 160 available GB. It installed, updated (while installing), then said, need to eject and restart, as usual. It restarted, but to a blank screen. No output whatsoever. Not even BIOS. Just blank. The monitor isn't even woken from sleep. Power cycled, still doing it. Tested the monitor with a laptop, and it is fine. What on earth is going on here?

  Read the article

• install grub on pendrive containing linux installation, making it system independent

  - by arpit

  i have a win7 system and i want to install debian 6 on usb flash drive. the problem is grub loader. i want to install the grub loader on usb itself, so i can just plug in the pendrive in any computer and boot to deb6. so in effect making the flash drive an independent system. i tried it earlier, but ended up with grub loader needing me to insert the pendrive every time to give me boot options to even boot the win7 system, even though it was on primary hdd. so is there a way to turn the pendrive into full linux system with own boot loader, which can automatically detect os in the system i plug it in and be able to boot any of them. totally, self sufficient and system independent; making the pen drive so that it only needs a host system to run the os it carries. thank you, waiting for replies.

  Read the article

• Chassis fans and power LEDs still work in Hibernate

  - by Jaded

  I have ASRock Z68 Extreme3 Gen3 motherboard recently updated to 2.20 BIOS version. OS is Windows 7 x64. The problem is after that update full hibernation (by that i mean full system power off) stopped working although everything was fine before. Now when I press hibernate, sleep in initiated as usual, monitor goes to sleep, HDD and CPU fan stop spinning, but chassis fans (i have Gigabyte Aurora 3D 570 case with two rear and one front fans) still remain working. Also power leds are lit as if computer is turned on. Tried changing different UEFI settings related to sleep mode, and none of them change above described behaviour. I have "Deep Sleep" (Advanced-South Bridge Configuration) set to "Enabled in S4-S5", "Suspend to RAM" (Advanced-ACPI Configuration) set to "Auto", all fans settings in "H/W Monitor" set to "Auto".

  Read the article

• HP Proliant DL360 G5 + MSA50 RAID Setup recommendations

  - by JohnRB

  I am running a HP Proliant DL360 2 x 3GHz Xeon 16GB Ram P400 integrated RAID card with 6 x 73GB SAS HDDs running Ubuntu Server 14.04 CLI only. I recently got my hands on a MSA50 SAS Enclosure (10 x SAS HDD bays w/ SAS in/out interface) and wondering what you guys recommended as far as an addon raid controller for one of the pciex slots. I have both slots free Full and Half sizes. Any suggestions are greatly appreciated, I am an I.T. Consultant but have not used these particular units before so I was hoping to hear from someone who has. Thanks!

  Read the article

• Page File - Why set one for each drive?

  - by Magic

  Hello, I have Windows Vista Business Edition running on my laptop (brand is HCL). I have 4 HDD which are as follows - C - 29.2 GB (of which only 3.68 GB is free) D - 39 GB (of which 37.8 GB is free) E - 39 GB (of which 37.3 GB is free) F - 41.6 (of which 41.4 GB is free) However, my page file settings are as below. Automatically manage paging file for all drives. Question - Why should I set one for each drive? Should I set my page file on the OS Root Drive. I happen to talk to a System Administrator in an IT company and he advised that we should never set the page file on the OS drive but on an alternate drive wherever possible. It would be really helpful, if you can guide me here or at least point me to the right resources so that I can read about paging and best practices of paging. Cheers,

  Read the article

• VirtualBox, physical disks, and snapshots

  - by noamtm

  I have an Ubuntu guest installed on a raw HDD (entire disk, not a partition). It runs just fine under WinXP. In addition, I was able to boot directly into it (using the BIOS boot-device selector). At some point, I have created a snapshot of the VM. I have made some changes since then. Today, after a long time, I tried booting into the "VM" disk. It worked, but all the data there is pre-snapshot (or, rather, frozen at the snapshot). Can I somehow merge the changes since I took the snapshot into the physical state?

  Read the article

• Are there significant performance difference between chipsets?

  - by Let_Me_Be

  I wanted to build a single PC to fit all my needs, but since hardware virtualization support (Vt-d specifically) is a huge problem, I decided to build multiple single-use oriented computers. In this scenario I want these computers to be as minimal as possible. So the core of my question is: "Are there significant performance difference between chipsets?" I'm considering Sandy-Bridge i7 or i5 for my "game console" computer. And since I will use only one graphic card, one or two HDD, 4-8GB RAM and nothing else, I would be fine with a micro-ATX board with a Q67 (or some other low-end chipset).

  Read the article

• Need disc image help pronto!

  - by data

  I recently got a job as a junior network administrator. Last week the senior admins did their yearly reinstall of server 2003, exchange, drivers etc on the main server. I've been asked to back up the disc so that next year they can just copy over the pre-made image. What tools can i use to achieve both the creation of the entire servers HDD image and loading it back on (id like to test it in the sandbox.) To impress them, a program that is free is preferable. And maybe a tool that can do it all from booting the program off of a USB drive.

  Read the article

• Problem with blue-sceens

  - by Oystein

  Hi I have a problem with my computer. I get bluescreens a lot. I get different bluescreen-codes everytime, and this happens randomly. This can happen when I boot my computer, when I'm surfing on the internett, when I'm away from the computer and are logged out... I tried to disconnect everything that was connected to my computer, beside the monitor. That didn't help. I have reinstalled Windows, changed memory, changed video card, but nothing of this helped, I still get bluescreens. I guess the problem here is the mothercard, CPU or HDD. But I want your opinion before I order anything new to my computer. Can you tell me what the problem is?

  Read the article

• Increasing a Linux partition once VM size increased in vSphere?

  - by dannymcc

  I have a Ubuntu 12.04 VM running on VMWares ESXi 5.1. The server (VM) itself has run out of space, the results of df -h are as follows: Filesystem Size Used Avail Use% Mounted on /dev/sda1 19G 17G 1.2G 94% / udev 490M 4.0K 490M 1% /dev tmpfs 200M 232K 199M 1% /run none 5.0M 0 5.0M 0% /run/lock none 498M 0 498M 0% /run/shm The original VM HDD size was just under 19GB which is I have now increased to 100GB within the vCenter GUI: Is there a simple way of doing this? The VM doesn't seem to acknowledge the increase at all.

  Read the article

• Backup strategies for linux based file servers

  - by iceman

  I want to know some enterprise-wide backup strategies used for linux based file servers. What are the tools and techniques used when making a backup. for e.g when a backup fails on a machine, it should email the admin about the failure and also a log file. This won't happen incase the HDD fails and the system is completely out of work, but in other cases where a backup didn't take place, the admin should be able to know. What tool/scripts can be used for this particular scenarios?

  Read the article

• What is the best way to create RAID 1?

  - by user3125731

  I'm looking for a way to create the RAID 1 array without losing my data on CentOS. Here's my situation: I've got a web server running on CentOS. There is one VG partition with few LV volumes. I bought a second HDD (the same model and size as the first one) and I want to create the RAID 1 configuration. I can't just shut down this server for more than an hour because my clients will be disappointed. I need to do this as quickly as possible with minimal risk of data loss.

  Read the article

• UUID in Mountain Lion

  - by Naji

  I am trying to find my external HDD UUID in Mountain Lion but diskutil info /dev/disk1s1 returns: Najis-MacBook-Air:~ ****$ diskutil info disk1s1 Device Identifier: disk1s1 Device Node: /dev/disk1s1 Part of Whole: disk1 Device / Media Name: Untitled 1 Volume Name: My Book Escaped with Unicode: My%FF%FE%20%00Book Mounted: Yes Mount Point: /Volumes/My Book Escaped with Unicode: /Volumes/My%FF%FE%20%00Book File System Personality: NTFS Type (Bundle): ntfs Name (User Visible): Windows NT File System (NTFS) Partition Type: Windows_NTFS OS Can Be Installed: No Media Type: Generic Protocol: USB SMART Status: Not Supported Total Size: 2.0 TB (2000364240896 Bytes) (exactly 3906961408 512-Byte-Blocks) Volume Free Space: 212.5 GB (212506509312 Bytes) (exactly 415051776 512-Byte-Blocks) Device Block Size: 512 Bytes Read-Only Media: No Read-Only Volume: Yes Ejectable: Yes Whole: No Internal: No And there is no UUID. What is wrong exactly? Thank you.

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >