Search Results

Search found 6545 results on 262 pages for 'usb hub'.

Page 90/262 | < Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >

• ARM Debian (squeeze) USB driver with mismatch 3.3.3 kernel but /lib/modules/2.6.36

  - by frank

  Hei guys, my sheevaplug embedded server works fine, but when I wanted to use USB, the device gets not attached to /dev/tty/USB0 lsusb shows correctly: Bus 001 Device 002: ID 067b:2303 Prolific Technology, Inc. PL2303 Serial Port an modprobe usbserial raises: FATAL: Could not load /lib/modules/3.3.3/modules.dep: No such file or directory in the /lib/modules/ Folder there is instead a 2.6.36-Folder uname -r gives 3.3.3 How can I overcome this mismatch? Can I create a symlink? I can't flash this embedded device since it is deployed somewhere, only ssh? Please advise!

  Read the article

• Problem with usb wireless mouse

  - by aiacet

  Recently I have started having problems with my wireless mouse (Wireless Optical Mouse MI-4910D). Sometimes when I start my PC or during a game the pointer/arrow stops moving. When the PC boots the pointer is locked in the center of the screen. If I'm lucky it helps to change the USB wireless adapter from port 1 to port 2 but sometimes this trick doesn't work and I have to restart my PC to get the mouse to work again. Like you can see in the product web page this mouse don't have a driver but only a tool to solve some problems. Thank you in advance to all the "super-users" that reading this question would be help me Ajax

  Read the article

• Using a 3g usb dongle as Cisco router access point

  - by beakersoft

  We have an office opening, and we aren't going to have comms into the building when management want the building to open. Our only option (I think) Is to try and hook up a 3/4g dongle to something to act as the access point, and send all the traffic via that. The model of router we use wont support the usb dongle, so we need some sort of 'bridge' My idea was to build a Linux box, plug the dongle into that and then via the Ethernet ports plug the router in. We need the Cisco router in the equation as we create VPN connections over that back to head office. My question is will this work?

  Read the article

• USB webcam detected in KVM, but doesn't work

  - by Gene Vincent

  I have installed XP in a virtual machine running on Linux with QEMU/KVM (qemu-kvm-0.11.0-4.5.2). I export my Linux webcam to KVM using the switches "-usb -usbdevice host:046d:0929". The XP guest sees the webcam and the drivers install, but the camera only shows a black image. When I open the camera in Windows Explorer, it says "0 images" and a black image, while on a real XP, it says "1 image" and shows the video from the camera. I tried the same with a different webcam, but the result is the same. Any ideas what might be wrong or how I could debug this ?

  Read the article

• Routers with USB plug to connect external storage

  - by sixtyfootersdude

  I am just about to buy a new wireless router. I want to be able to hook up a harddrive to it and let the harddrive serve the entire network. I will mostly be storing media and some backups on the drive. I know I could get some kind of NAS but I would prefer to just hook up one of my many unused hard drives directly to my router. It looks like d-link has several products that do this using shareport. If you were wanting to have network storage how would you do it? With a NAS? Using a router with a USB port. Are these systems robust? What router would you buy?

  Read the article

• Data transfer speed to USB storage connected to wifi router very slow

  - by RonakG

  Here is my setup. A Linksys Cisco E3200 wifi router. A MacbookPro running OS X Lion 10.7.4. A Seagate GoFlex 1TB hard drive connected to wifi router via the USB port. When I try to transfer data from my MBP to the HDD, the data transfer rate is very low. I'm getting around 3MB/s write speed. This is very slow compared to the speed I get when HDD is directly connected to the MBP. The HDD is NTFS formatted. And the router provides access to HDD using Samba share. So I connect to the HDD using smb://. What is the limiting factor here affecting the data transfer rate?

  Read the article

• Audio problems with asus notebook with Bluetooth and usb devices in win 7

  - by QuickSilver

  My notebook is Asus P53E - core i5 Windows 7 installed Audio from PC speakers and headphone is distorted when i turn on bluetooth or some usb device plugged in. I belive this is a software issue. I tried updating my audio drivers but nothing help. Any help will be appreciated. Update: After a few days digging I found that this problem is causing by the asus sound enhancement application SonicFocus. The distortion stops while turning off sonic focus. Can anyone help me with a solution other than turning off SonicFocus

  Read the article

• How to use a D-Link usb network adapter on debian

  - by Barranka

  I have a Debian (squeeze) desktop, and I need to use a D-Link 150 USB Wireless Network Adapter. So far I've done this: $ lsusb ... Bus 001 Device 006: ID 2001:3c18 D-Link Corp. ... After looking for a solution in google, I found that I needed to install the following package: firmware-ralink_0.28+squeeze1_all.deb I've installed it, but Debian doesn't want to find the adapter. When I run lsmod, I can't find what I'm supposed to find: rt2870sta Can you point me in the right direction?

  Read the article

• Windows 7 automatically install usb driver

  - by Dan

  I have tried to install usb driver for Samsung arndale on Windows 7. Now it has two entries in Device Manager. I can not uninstall the one with question mark. If I uninstall both of them, when I plug in the hardware, Windows 7 will automatically install both of the entries when the circuit pulg in. I don't get the chance to choose the right driver. When I try to update the wrong driver, it says found the driver but can not install it.

  Read the article

• Linux - Network Sharing a local NTFS usb drive

  - by Jonathan Rioux

  I have an external hard drive formated in NTFS which I would like to be able to access by the network. I want to make a network share out of it. I also have a Debian machine running in my house and I then got an idea. I want to plug in my external hard drive (usb) into my Debian machine, and make a windows share with it, maybe with Samba, so I will be able to access it from my Windows 7 laptop and see it as a network share. Additionally, how can I restrict specific folders of that network share, and allow only specific folders to specific users? For instance, I would like to give my girlfriend access to a folder of her name so she can put her files and so she wont be able to see the stuff in my folder...

  Read the article

• Unable to read USB External HD after aborted back up

  - by Stjepan

  I have two PC laptops. On one of the two PC's (Win 7) I Aborted a back up and ejected the drive. Now that same pc wants to format the drive. I plugged the drive into the other pc (Win XP) and that one reads the drive and all data stored. Why does one want to format the drive and the other does not? .... My apologies for not being clearer with my original question and thanks for the responses, so; The drive is not a flash stick, its an external WD Hard drive plugged in via the USB. The two tips provided did not resolve the issue. Strangely, the pc with win XP can read the drive but the pc that the HD was plugged into when the backup was aborted still wants to format the drive. Stjep

  Read the article

• Stream computer screen to TV via network instead of a USB wireless link

  - by user24559

  I want to stream my computer screen (not just video or a limited amount of content) to my TV via the network. I know there are wireless devices that use USB to tranfer the screen to the TV. However, these are limited to a short distance. What I want to do is stream the data via the network so I can be anywhere within the network and have the data shown on the tv. I am looking for video and sound to transfer. I want the entire computer screen to transfer just like when you connect the computer to the tv via VGA or HDMI and the sound out using the 3.5mm plug. I have been unable to find a unit that allows for the entire computer screen to transfer via the network. I just find the ability to stream video. I am using Windows 7 Ultimate with a quad processor and 16 GB of memory so I have the power to handle the transfer. My tv is hdtv.

  Read the article

• recommendations for disk -> usb backup software

  - by TWood

  Recently I lost a tape drive and rather than repair the unit I decided that backups to usb external drives would be cheaper. In the past I used NTBackup and figured that the new server 2008 R2 backup wbadmin utility would be able to meet my needs. It does not. I am looking for recommendations for another utility that i can use. My requirements are: -backup local disk in addition to files on a network share -scheduled task integration (or some gui options to manage schedule) -non-incremental backup Basically I could do this all with WBAdmin if it just supported network shares. I saw some links that described attaching a vhd pointed to a network share but I am trying to avoid hacks like that. If i'm going to do all that trouble I'd just as well manually copy the directories over myself. If anyone has any software suggestions that might make this task easier for me let me know please. I am considering BackupAssist but can only find a few reviews here and there for it.

  Read the article

• How can I create a bootable CD-ROM/USB Drive? (With NTFS + USB Drive support)

  - by RonK

  My motherboard got fried and I was forced to get a new hardware set (MB+CPU+RAM) so in most likelyhood I'll need to reinstall my Windows 7. I usually follow procedure and put the OS on the primary partition and my data on a logical partition - so I can format the primary without concern - but this time I made a mistakte and left some crucial items on the primary partition. I want to create a bootable CD-ROM/USB Drive which can read NTFS so I can access this data. If booting via a CD-ROM, I would prefer being able to connect a disk-on-key/My Passport to the computer and be able to access it to transfer the data to it. How can I do it? (free 3rd party applications are most welcome)

  Read the article

• Using Fantom USB Driver from JNI

  - by Starky

  I'm having some difficulty with JNI. I'm using JNI to call some Java methods from a C++ program. This implementation of JNI is working fine. The goal of the Java program is to send commands over USB to a LEGO robot using LEJOS. This works fine when running the Java program by itself but for some reason when I call the methods from C++ the robot cannot be detected. My only lead so far is that there may be some problem using the Fantom USB driver from a JNI call. This is the driver that's used for the USB connection to the robot. I've had a quick look at the code for the driver and it looks like it makes use of JNI too. So I guess I'm asking the following things: What differences could there be between calling code from JNI and executing it through command prompt with the 'java classname args' method which could cause this problem? Could it be that there is some problem with me using JNI in C++ when the driver that's being used uses JNI as well? I won't post any code just now as I don't think it's really relevant but if anyone thinks that they need to see it then I can add it.

  Read the article

• Opening my application when a usb device is inserted on Windows using WMI

  - by rsteckly

  Hi, I'm trying to launch an event when someone plugs in a usb device. For now, I'm content to simply print something to the console (in the finished product, it will launch an application). This code is very loosely adapted from: http://serverfault.com/questions/115496/use-wmi-to-detect-a-usb-drive-was-connected-regardless-of-whether-it-was-mounted There's two problems: 1) I need to pass the argument to Management scope dynamically because this will be installed on computers I don't use or whose name I don't know. 2) I'm getting an invalid namespace exception when I call w.Start(); Any ideas what I'm doing wrong? static ManagementEventWatcher w=null; static void Main(string[] args) { AddInstUSBHandler(); for(;;); } public static void USBRemoved(object sneder, EventArgs e) { Console.WriteLine("A USB device inserted"); } static void AddInstUSBHandler() { WqlEventQuery q; ManagementScope scope = new ManagementScope("HQ\\DEV1"); scope.Options.EnablePrivileges=true; q=new WqlEventQuery(); q.EventClassName+="_InstanceCreationEvent"; q.WithinInterval=new TimeSpan(0,0,3); q.Condition=@"TargetInstance ISA 'Win32_USBControllerdevice'"; w=new ManagementEventWatcher(scope,q); w.EventArrived+=new EventArrivedEventHandler(USBRemoved); w.Start(); }

  Read the article

• Running an application from an USB device...

  - by Workshop Alex

  I'm working on a proof-of-concept application, containing a WCF service with console host and client, both on a single USB device. On the same device I will also have the client application which will connect to this service. The service uses the entity framework to connect to the database, which in this POC will just return a list of names. If it works, it will be used for a larger project. Creating the client and service was easy and this works well from USB. But getting the service to connect to the database isn't. I've found this site, suggesting that I should modify machine.config but that stops the XCopy deployment. This project cannot change any setting of the PC, so this suggestion is bad. I cannot create a deployment setup either. The whole thing just needs to run from USB disk. So, how do I get it to run? (The service just selects a list of names from the database, which it returns to the client. If this POC works, it will do far more complex things!)

  Read the article

• WinXP - Having trouble sharing internet with 3G USB modem via ICS

  - by Carlos Nunez

  all! I've been banging my head against a wall with this issue for a few days now and am hoping someone can help out. I recently signed up for T-Mobile's webConnect 3G/4G service to replace the faltering (and slow) DSL connection in my apartment. The goal was to put the SIM in one of my old phones and use its built-in WLAN tethering feature to share Internet out to rest of my computers. I quickly found out that webConnect-provisioned SIMs do not work with regular smartphones, so I was forced to either buy a 4G-compatible router or tether one of my old laptops to my wireless router and share out that way. I chose the latter, and it's sharpening my inner masochistic self by the day. Here's the setup: GSM USB modem (via hub), ICS host - 10/100 Mbps Ethernet NIC, ICS "guest" - WAN port of my SMC WGBR14N wireless router in bridged mode (i.e. wireless access point). Ideally, this would make my laptop the DHCP server and internet gateway with the WAP giving everyone wireless coverage. I can browse internet on the host laptop fine. However, when clients try to connect, they get a DHCP-assigned IP from the laptop and are able to use the Internet for a few minutes before completely dying. After that happens, they are able to re-associate with the WAP and get IP addresses, but are unable to use Internet or resolve IP addresses until the laptop and router are restarted. If they do get access, it's very, very slow. After running Wireshark on the host machine, it turns out that this is because every TCP connection keeps getting RST. DNS seems to work. I would normally think the firewall is the culprit here, but when it drops packets, it drops them completely. The fact that TCP connections are being ACK'ed by the destination rules that out. Of course, none of the event Log isn't saying anything about what's going on. I also tried disabling power management on the NIC, since that's caused problems in the past; that didn't help either. I finally disabled receive-side scaling as per a Microsoft KB (that applied to Windows Server 2003, SP2) to no avail. I'm thinking of trying it with a different NIC (will be tough; don't have a spare Ethernet NIC around for the laptop), but I'm getting the impression that this simply doesn't work. Can anyone please advise? I apologise for the length of this post; all contributions are much appreciated! -Carlos.

  Read the article

• Windows XP machine not seeing external FAT32 partitions correctly

  - by Rob_before_edits

  About 8 months ago my Windows XP machine stopped being able to see FAT32 external drives when I plug them in... mostly. I will explain... It happens with all my FAT32 drives, whether they be unpowered external hard drives, powered external hard drives, SDHC cards plugged directly into the machine's card reader, or SDHC cards plugged in via a separate USB card reader. All of these drives/cards used to work fine on this machine. They all stopped working at about the same time. NTFS volumes are not affected. If I plug in NTFS external drives they are recognized right away. I even have one external drive with two partitions on it, one is NTFS which is recognized, the other is FAT32, which is not recognized. If I attach a FAT32 drive, then reboot, then the drive almost always becomes visible to the machine after the reboot. Sometimes I can plug in a FAT32 drive and it works right away. Not often though. I'd say I get lucky more often with SDHC cards than hard drives. I'm developing a theory that I only get lucky with hard drives if I'm running Acronis Disk Director when I plug them in, though that usually doesn't work either - I need more data here, this may be a red herring. Getting lucky with a hard drive is really rare, usually I have to reboot. When a FAT32 is recognized, either because I got lucky or because I rebooted, I can almost never safely disconnect it. It tells me "The device 'Generic volume' cannot be stopped right now. Try stopping the device again later". I can't seem to get around this. IIRC, I've tried closing every open window, and still no luck. Since I care about my data usually the only way to disconnect a FAT32 drive is to shut down the machine. As you can imagine, two reboots just to read a drive is getting pretty old... When the machine fails to see a FAT32 drive it usually comes up with the appropriate drive letter and the words "Local Disk" in Windows Explorer instead of the correct partition name. If I click on it I get "J:\ is not accessible. The parameter is incorrect." Before this problem arose I always clicked the "safely remove" button for everything, including SDHC cards where I think it's not necessary. I've known for a long time that this is the correct procedure for hard drives, so I don't think failing to do this was the cause of this problem (before someone asks :) Any answers or suggestions most welcome.

  Read the article

• Expendable, Redundant, Easily recoverable

  - by MeIr

  I am desperate at this point, I have been looking for "Big storage" solution for a while on my own and I can't find anything that would suite my needs. But now push came to shove. Current situation: I have about 6TB data storage (already full) - Drobo. Yesterday Drobo died on me and it put me into bad situation - I can't recover my data without buying another Drobo. From extensive research online I realized that Drobo is not the safest bet and by now it seems very poor choice. I ordered new Drobo to try to get my data back, however I don't want to be in the same situation later and continuing using Drobo promises this event to re-occur. What I am looking for: 1) Inexpensive setup. 2) Dynamically extendable - add more drives and/or replace a drive with bigger capacity. 3) Redundant - setup against 1-3 drive failure, will depend on total number of drives. For the sake of argument let's assume for every 4 drives one should be able to fail without data loss. 4) Easy data recovery - let's say unforeseen happens, I would like to be able to recover information without buying new tools or replacements - example: new Drobo. 5) Should be USB or Network Attach Storage 6) No demand on speed. Doesn't have to be fast, I am not doing video editing on the setup. However if option exists, would be nice to have a decent speed. After thoughts: I reviewed few options and FreeNAS looks nice, but it doesn't have #2 - Dynamic extendability. There are work around with Pools but it seems a bit complicated and unnecessary. More over it seems like data safety is a big question - saw some horror stories. Please advise on what options I have and what seems like an optimal solution (if any). I don't care if it has to be Windows or Linux box or any other OS and/or software that has to run on top, but simple solution is more attractive. Thank you! P.S: Feel free to ignore "After thoughts".

  Read the article

• Connecting to MSP430 via /dev/ttyACM0

  - by speciousfool

  I'd like some suggestions about how to fix garbled serial output from a device connected on /dev/ttyACM0. Lately I've been working on a development project making use of TI's MSP430 microcontroller (specifically the eZ430-RF2560). Over on this thread you can see we've been testing some code and have found that the output of the microcontroller over serial is garbled. The btstack provides simple counter test program. When we run the program and look at the serial port output using PuTTY on Windows 7 we see: rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26230 rfcomm_send_internal cid 117 doesn't exist! BTstack counter 26231 However if we connect from various Ubuntu clients we get something like: Stt.R. BTacn 0 BTacn 002BTacn 0 BTcct 04BTtacoe 5BTacun My current belief is that this is because the device is being detected by cdc_acm as a generic USB ACM device. Another thread about a similar microcontroller suggests that the device should use a specific usb serial driver. We've verified that the module is compiled on our system and did a "modprobe ti_usb_3410_5052" but this had no effect on cdc_acm. Here is the relevant section of the kernel's debug log: [ 2735.092987] usb 2-1.2: new full speed USB device number 5 using ehci_hcd [ 2735.213655] cdc_acm 2-1.2:1.0: This device cannot do calls on its own. It is not a modem. [ 2735.213669] cdc_acm 2-1.2:1.0: No union descriptor, testing for castrated device [ 2735.213720] cdc_acm 2-1.2:1.0: ttyACM0: USB ACM device [ 2745.241996] generic-usb 0003:0451:F432.0003: usb_submit_urb(ctrl) failed [ 2745.242023] generic-usb 0003:0451:F432.0003: timeout initializing reports [ 2745.242401] generic-usb 0003:0451:F432.0003: hiddev0,hidraw0: USB HID v1.01 Device [Texas Instruments Texas Instruments MSP-FET430UIF] on usb-0000:00:1d.0-1.2/input1 So, in summary, we'd like to figure out how to properly connect to this device. Also of use may be the appropriate place to file a bug report.

  Read the article

• Hardware Emulator / Simulator for Winforms .Net Application

  - by Suneet

  I have a WinForms .Net HMI software which talks to hardware over USB. I check for communication with the hardware at Load time and if communication is active then run it (The hardware manufacturer has provided a communication library to talk over USB). I want to build an emulator for cases when communication with hardware is not possible (not connected) and want the software to run in simulated mode by providing dummy values for different states of hardware. Has anyone implemented something similar? Any pointers will be helpful. Are there any design patterns to handle such implementations. TIA

  Read the article

• no volume in kubuntu 10.04

  - by neha

  hello,I am having both gnome and kde on my system.as my gnome is working perfectly but in KDE is there is no sound being generated. output of apley -l and lspci commands is as follows.. neha@neha-laptop:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Intel [HDA Intel], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: Intel [HDA Intel], device 3: INTEL HDMI [INTEL HDMI] Subdevices: 1/1 Subdevice #0: subdevice #0 and output of lspci command is: neha@neha-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c) 00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02) 00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02) 00:1a.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02) 00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02) 00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02) 00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02) 00:1c.4 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 5 (rev 02) 00:1d.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02) 00:1d.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02) 00:1d.2 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02) 00:1d.7 USB Controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2) 00:1f.0 ISA bridge: Intel Corporation 82801HEM (ICH8M) LPC Interface Controller (rev 02) 00:1f.1 IDE interface: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) SATA AHCI Controller (rev 02) 00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02) 02:09.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05) 02:09.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22) 02:09.2 System peripheral: Ricoh Co Ltd R5C843 MMC Host Controller (rev 12) 02:09.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12) 02:09.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev ff) 09:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8040 PCI-E Fast Ethernet Controller (rev 12) 0b:00.0 Network controller: Broadcom Corporation BCM4312 802.11a/b/g (rev 01) can anyone help me??

  Read the article

• wireless LAN soft blocked on Ubuntu 13.10

  - by iacopo

  I've troubles with bluetooth and with lan. When I digit: rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: phy0: Wireless LAN Soft blocked: yes Hard blocked: no When I digit: lspci -v 00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Subsystem: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Root Complex Flags: bus master, 66MHz, medium devsel, latency 0 00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] (prog-if 00 [VGA controller]) Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity [Radeon HD 7600G] Flags: bus master, fast devsel, latency 0, IRQ 48 Memory at c0000000 (32-bit, prefetchable) [size=256M] I/O ports at f000 [size=256] Memory at feb00000 (32-bit, non-prefetchable) [size=256K] Expansion ROM at [disabled] Capabilities: Kernel driver in use: radeon 00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Subsystem: Advanced Micro Devices, Inc. [AMD/ATI] Trinity HDMI Audio Controller Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at feb44000 (32-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:10.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller (rev 03) (prog-if 30 [XHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB XHCI Controller Flags: bus master, fast devsel, latency 0, IRQ 18 Memory at feb48000 (64-bit, non-prefetchable) [size=8K] Capabilities: Kernel driver in use: xhci_hcd 00:11.0 SATA controller: Advanced Micro Devices, Inc. [AMD] FCH SATA Controller [AHCI mode] (rev 40) (prog-if 01 [AHCI 1.0]) Subsystem: Advanced Micro Devices, Inc. [AMD] Device 7800 Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 45 I/O ports at f190 [size=8] I/O ports at f180 [size=4] I/O ports at f170 [size=8] I/O ports at f160 [size=4] I/O ports at f150 [size=16] Memory at feb50000 (32-bit, non-prefetchable) [size=2K] Capabilities: Kernel driver in use: ahci 00:12.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4f000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:12.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4e000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:13.0 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4d000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:13.2 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller (rev 11) (prog-if 20 [EHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB EHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 Memory at feb4c000 (32-bit, non-prefetchable) [size=256] Capabilities: Kernel driver in use: ehci-pci 00:14.0 SMBus: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller (rev 14) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SMBus Controller Flags: 66MHz, medium devsel Kernel driver in use: piix4_smbus 00:14.1 IDE interface: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller (prog-if 8a [Master SecP PriP]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH IDE Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 17 I/O ports at 01f0 [size=8] I/O ports at 03f4 [size=1] I/O ports at 0170 [size=8] I/O ports at 0374 [size=1] I/O ports at f100 [size=16] Kernel driver in use: pata_atiixp 00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller Flags: bus master, slow devsel, latency 32, IRQ 16 Memory at feb40000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:14.3 ISA bridge: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge (rev 11) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH LPC Bridge Flags: bus master, 66MHz, medium devsel, latency 0 00:14.4 PCI bridge: Advanced Micro Devices, Inc. [AMD] FCH PCI Bridge (rev 40) (prog-if 01 [Subtractive decode]) Flags: bus master, 66MHz, medium devsel, latency 64 Bus: primary=00, secondary=01, subordinate=01, sec-latency=64 00:14.5 USB controller: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller (rev 11) (prog-if 10 [OHCI]) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH USB OHCI Controller Flags: bus master, 66MHz, medium devsel, latency 32, IRQ 18 Memory at feb4b000 (32-bit, non-prefetchable) [size=4K] Kernel driver in use: ohci-pci 00:14.7 SD Host controller: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller (prog-if 01) Subsystem: Advanced Micro Devices, Inc. [AMD] FCH SD Flash Controller Flags: bus master, 66MHz, medium devsel, latency 39, IRQ 16 Memory at feb4a000 (64-bit, non-prefetchable) [size=256] Kernel driver in use: sdhci-pci 00:15.0 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 0) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=02, subordinate=02, sec-latency=0 I/O behind bridge: 0000e000-0000efff Prefetchable memory behind bridge: 00000000d0000000-00000000d00fffff Capabilities: Kernel driver in use: pcieport 00:15.1 PCI bridge: Advanced Micro Devices, Inc. [AMD] Hudson PCI to PCI bridge (PCIE port 1) (prog-if 00 [Normal decode]) Flags: bus master, fast devsel, latency 0 Bus: primary=00, secondary=03, subordinate=03, sec-latency=0 Memory behind bridge: fe900000-feafffff Capabilities: Kernel driver in use: pcieport 00:18.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 0 Flags: fast devsel 00:18.1 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 1 Flags: fast devsel 00:18.2 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 2 Flags: fast devsel 00:18.3 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 3 Flags: fast devsel Capabilities: Kernel driver in use: k10temp 00:18.4 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 4 Flags: fast devsel 00:18.5 Host bridge: Advanced Micro Devices, Inc. [AMD] Family 15h (Models 10h-1fh) Processor Function 5 Flags: fast devsel 02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 07) Subsystem: PC Partner Limited / Sapphire Technology Device 0123 Flags: bus master, fast devsel, latency 0, IRQ 46 I/O ports at e000 [size=256] Memory at d0004000 (64-bit, prefetchable) [size=4K] Memory at d0000000 (64-bit, prefetchable) [size=16K] Capabilities: Kernel driver in use: r8169 03:00.0 Network controller: Ralink corp. RT3290 Wireless 802.11n 1T/1R PCIe Subsystem: AzureWave Device 2b87 Flags: bus master, fast devsel, latency 0, IRQ 47 Memory at fea40000 (32-bit, non-prefetchable) [size=64K] Memory at fea30000 (32-bit, non-prefetchable) [size=64K] Capabilities: Kernel driver in use: rt2800pci 03:00.1 Bluetooth: Ralink corp. RT3290 Bluetooth Subsystem: AzureWave Device 2787 Flags: bus master, fast devsel, latency 0, IRQ 11 Memory at fea20000 (32-bit, non-prefetchable) [size=64K] Memory at fea10000 (32-bit, non-prefetchable) [size=64K] Memory at fe900000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at fea00000 [disabled] [size=64K] Capabilities: Thank you for all the help

  Read the article

• Ubuntu 12.04 problem with E160 huawei - can't detect the device and freezing system

  - by Matt

  I have just installed 12.04 and plugged in E160 and nothing happened - modem doesn't mount. I have found this solution : Ubuntu does not mount some Huawei devices due to bugs, problems etc. See if these work: 1st option: Connect the USB modem. After 10 seconds, type this in a terminal window: lsusb The output will be like this: Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd. Bus 004 Device 002: ID 413c:3016 Dell Computer Corp. Optical 5-Button Wheel Mouse Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 002 Device 005: ID 0b97:7762 O2 Micro, Inc. Oz776 SmartCard Reader Bus 002 Device 004: ID 413c:8103 Dell Computer Corp. Wireless 350 Bluetooth Bus 002 Device 003: ID 0b97:7761 O2 Micro, Inc. Oz776 1.1 Hub Bus 002 Device 002: ID 413c:a005 Dell Computer Corp. Internal 2.0 Hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub The device is a Huawei modem, so let's look at the output. The relevant entry is: Bus 004 Device 004: ID 12d1:140b Huawei Technologies Co., Ltd Hence, you must type: sudo modprobe usbserial vendor=0x12d1 product=0x140b 2nd option Download usb-modeswitch and usb-modeswitch-data packages from packages.ubuntu.com. Install them through the command: sudo dpkg -i usb-modeswitch*.deb 3rd option Try a combination of both. but with no result. The modem is still not detected. I've tried to add a new connection but the system can't see my device in setup dialogue. Also I have noticed that when I open eg. terminal and try to type sth, the system freezes for a while.. Thanks for help!

  Read the article

< Previous Page | 86 87 88 89 90 91 92 93 94 95 96 97  | Next Page >