Search Results

Search found 49518 results on 1981 pages for 'configuration files'.

Page 909/1981 | < Previous Page | 905 906 907 908 909 910 911 912 913 914 915 916  | Next Page >

• Problems with NVIDIA drivers: White screen with full(or almost full)screen apps

  - by Felipe

  My NVIDIA graphic card is a 7050/610i. My problem is that after upgrading to the last NVIDIA drivers when I use fullscreen apps (or almost fullscreen) the windows goes white. My xorg.conf file: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 270.29 ([email protected]) Wed Feb 23 16:38:34 PST 2011 Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" Option "AddARGBGLXVisuals" "True" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" # generated from default EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Device" Identifier "Device0" VendorName "NVIDIA Corporation" Driver "nvidia" Option "NoLogo" "True" EndSection Any idea on how to solve this? <--Sorry for bad english, ask for more info--

  Read the article

• SharePoint Content Database Sizing

  - by Sahil Malik

  SharePoint, WCF and Azure Trainings: more information SharePoint stores majority of its content in SQL Server databases. Many of these databases are concerned with the overall configuration of the system, or managed services support. However, a majority of these databases are those that accept uploaded content, or collaborative content. These databases need to be sized with various factors in mind, such as, Ability to backup/restore the content quickly, thereby allowing for quicker SLAs and isolation in event of database failure. SharePoint as a system avoids SQL transactions in many instances. It does so to avoid locks, but does so at the cost of resultant orphan data or possible data corruption. Larger databases are known to have more orphan items than smaller ones. Also smaller databases keep the problems isolated. As a result, it is very important for any project to estimate content database base sizing estimation. This is especially important in collaborative document centric projects. Not doing this upfront planning can Read full article ....

  Read the article

• Apache Commons PropertiesConfiguration escapes characters on Save [migrated]

  - by Anuvrat

  I am using the commons-configuration from apache commons library. I have a properties file which has properties like: blog_loc=http://my.blog.com blog_name="my blog name" I open the properties file, change the blog_name property and save the file. The following are the lines of code I use: PropertiesConfiguration propertyFile = new PropertiesConfiguration(propertyFileName); propertyFile.setProperty(blog_name, "blog name"); propertyFile.save(propertyFileName + ".out"); Unfortunately, in the output file certain characters get escaped as follows: blog_loc=http:\/\/my.blog.com blog_name=\"blog name\" Is there any way of preventing escaping of the above characters?

  Read the article

• Running a .bash file in Eclipse

  - by Anne Ambe

  I know this is really an Eclipse issue but I can't seem to login in their forum. I am running eclipse juno for some c/c++ development.However, I wrote a .bash script that initiate the entire program.As input argument to this script, I have a a configuration file which is one directory lower than the .bash file. In terminal I just do: ./startenb.bash ./CONF/ANNE it runs just fine. How can I configure the external tools in eclipse to take this file path as input argument? Any help or old thread vaguely addressing this issue is highly welcome.

  Read the article

• SQL Query Builder/Designer and code Formating

  - by DavRob60

  I write SQL query every now and then, I could easily write them freehand, but sometimes I do create SQL queries using SQL Query Designers for various reason. (I wont start to enumerate them here and/or argue about their usefulness, so let's just say they are sometime useful.) Anyway, I currently use 2 Query Designers : SQL server management studio's Query Designer. Visual Studio 2010's Query Builder (must often within the Table adapter Query Configuration Wizard.) There's something I hate about those two (I don't know about the others), it's the way they throw away my Code formatting of SQL queries after an edit. Is there any way to configure something to automatically reformat the SQL output or is there any external tool/plug-in that I could use to do that job?

  Read the article

• APT wedged by kernel version mismatch

  - by Leopd

  Apt is seemingly unable to do anything useful for me, repeatedly giving messages of this form: dpkg: dependency problems prevent configuration of linux-server: linux-server depends on linux-image-server (= 3.2.0.37.44); however: Version of linux-image-server on system is 3.2.0.37.45. linux-server depends on linux-headers-server (= 3.2.0.37.44); however: Version of linux-headers-server on system is 3.2.0.37.45. dpkg: error processing linux-server (--configure): dependency problems - leaving unconfigured This is basically the same problem as I cannot install any package (linux-image-server, linux-server dependencies errors) which got closed Duplicate to an answer that is totally useless for this situation. None of the advice in that very generic answer about dependencies helps. Explicitly: sudo apt-get clean sudo apt-get autoclean sudo apt-get update all have no not effect. While sudo apt-get -f install sudo dpkg --configure -a sudo apt-get -u dist-upgrade sudo apt-get -o Debug::pkgProblemResolver=yes dist-upgrade all give some form of the error message above.

  Read the article

• Robocopy failure with Windows Server 2008 Scheduled Task

  - by CC

  So I have a batch script for robocopy. Running this from the command line does exactly what I want. robocopy "D:\SQL Backup" \\server1\Backup$\daily /mir /s /copyall /log:\\lmcrfs4g\NavBackup$\robocopyLog.txt /np Then I create a Scheduled Task in Windows Server 2008. If I set up the task to use my Domain Admin account, great. But I'm trying to get it to run as a separate domain account for Scheduled Tasks. If I use that account, folders get created, but files aren't copied. I get the following error: 2011/02/17 15:41:48 ERROR 1307 (0x0000051B) Copying NTFS Security to Destination Directory D:\SQL Backup\folder\ This security ID may not be assigned as the owner of this object. I've verified my domain\Scheduled Tasks account has Full Control NTFS permissions on both the source and destination, and the Full Control Sharing on my hidden \server1\backup$ share. Just for giggles, I've tried adding the domain account to the local Administrators group on both servers. This works fine, but that seems like a lot of privileges just to copy files. Any ideas on what I'm missing?

  Read the article

• CentOS - mdadm raid1 drive won't mount to default location

  - by danny

  I'm running CentOS 5.5, the system, boot, swap, etc. is all on /dev/sda and I have two identical single-partition drives /dev/sdb1 /dev/sdc1 that are configured in RAID1 (using mdadm). It was working fine (configured to mount to /mnt/data in the fstab file) and I recently let yum install a couple of automatic updates without paying attention to what they were, and now it doesn't work. Raid is working fine (dmesg shows it gets loaded correctly). mdstat shows: # cat /proc/mdstat Personalities : [raid1] md0 : active raid1 sdc1[1] sdb1[0] XXXX blocks [2/2] [UU] unused devices: <none> Additionally, I can mount it anywhere other than its default directory (i.e. the following works, and I can read data off the drives). # mount /dev/md0 /mnt/data2 EXT3-fs warning: mounting fs with errors, running e2fsck is recommended But when I run the following I get: # mount -a mount: /dev/sdb1 already mounted or /mnt/data busy It says nothing is mounted when I try to umount /dev/sdb1 or umount /mnt/data, so I assume it's the second of those errors. However, lsof | grep mnt shows nothing. The weird thing is that I can save files in /mnt/data. So something is obviously mounted there, but when I try to umount it I get the error that nothing is mounted. /etc/mtab doesn't mention any of the partitions or files I am trying to work with, and fstab just has that one line I mentioned above that is supposed to mount my raid partition. Again, it was all working fine until I On Google I've found a few things about dmraid interfering with mdadm after an update, but I yum remove'd dmraid and rebooted and it didn't help. I'm really confused and need to get this working to get on with my work!

  Read the article

• Dual boot windows 8 pro and windows 7 on XPS 8500 Special Edition

  - by Jesse

  I am trying to install a dual boot with windows 7 premium and windows 8 Pro on an XPS 8500 special edition. I created a new primary partition on my C: drive, inserted the windows 8 install disk, and rebooted my computer from DVD. I select custom install and the dialog box saying "Where do you want to install windows at?" pops up but none of my drives are listed. Please help me determine what is going on. I don't understand why none of my drives are showing up on this menu. Not even the original drive. When I go to load driver and click on the partition I created it tells me "No signed device drivers were found. Make sure the installation media contains the correct drivers, and then click OK." resolved above issue by running setup from the source folder on the install disk instead of booting from DVD. Was able to locate my new partition and start install. It completes the first step of "Copying windows files" just fine but then on the next step "Getting files ready for installation" my computer restarts and attempts to load windows 8 but keeps telling me my pc needs to restart. This keeps going on in an infinite boot loop. Please help, this has been a nightmare!

  Read the article

• Installing pygame with pip

  - by David Y. Stephenson

  I'm trying to install pygame using pip in a virtualenv. I'm following this tutorial on using Kivy. However, running pip install pygame returns Downloading/unpacking pygame Downloading pygame-1.9.1release.tar.gz (2.1MB): 2.1MB downloaded Running setup.py egg_info for package pygame WARNING, No "Setup" File Exists, Running "config.py" Using UNIX configuration... /bin/sh: 1: sdl-config: not found /bin/sh: 1: smpeg-config: not found Hunting dependencies... WARNING: "sdl-config" failed! WARNING: "smpeg-config" failed! Unable to run "sdl-config". Please make sure a development version of SDL is installed. No files/directories in /tmp/pip-build-root/pygame/pip-egg-info (from PKG-INFO) Storing complete log in /home/david/.pip/pip.log The content of /home/david/.pip/pip.log can be found at http://paste.ubuntu.com/5800296/ What am I doing wrong? I'm trying to keep to the standard methodology for installing pygame as much as possible in order to avoid deviating from the tutorial. Suggestions?

  Read the article

• Best way to convert episodic DVDs for Windows Media Center?

  - by Roger Lipscombe

  I'm archiving my DVD collection. My goal is to be able to play them back in Windows Media Center. For feature-length DVDs, I'm using AnyDVD and CloneDVD, which is working well. For playing back TV shows (and other episodic content), I'm using Media Browser, which doesn't support a VIDEO_TS folder per episode. It expects the shows to be broken up into one file per episode (e.g. "Willo the Wisp - S01E12.avi"). For this, I'm attempting to use Handbrake, which, for extracting the episodes from DVD (or already-ripped VIDEO_TS folder), is working pretty well. The problem that I have is that the default x264 encoder over-compresses the resulting video stream, which results in hideous artifacts in animated shows. The aforementioned Willo the Wisp is a particularly bad example, because the original DVD is particularly "noisy". If I switch to using the ffmpeg encoder, the artifacts are gone in Windows Media Player, but I can't get the resulting files to play back in Windows Media Center. I see the first frame, and then there's an error message. I've installed the CCCP codec collection, but it doesn't seem to have made any difference. So: what's the best way to convert VIDEO_TS to individual episode files for playback in Windows Media Center?

  Read the article

• apache authentication

  - by veilig

  I'm trying to set up a local webserver on my network. I want to be able to be able to access the webserver from any machine inside my network w/out authenticating. and two extra domains need access to it w/out authenticating. Everyone else I would like to authenticate in. so far, I can get to it from inside my network. and the two extra domains can access my webserver, but everyone else is just hanging. They don't get an authentication or anything. can anyone tell me what I'm doing wrong here? This is part of my apache's site-available file so far: <Directory /path/to/server/> Options Indexes FollowSymLinks -Multiviews Order Deny,Allow Deny from All Allow from 192.168 Allow from localhost Allow from domain1 Allow from domain2 AuthType Basic AuthName "my authentication" AuthUserFile /path/to/file Require valid-user Satisfy Any AllowOverride All <Files .htaccess> Order Allow,Deny Allow from All </Files> </Directory>

  Read the article

• Windows 8, IIS8 how to make PHP imagick work

  - by Laci K

  I'm new to IIS server before IIS for 6 years I used Apache 2.X and with Apache imageMagick and its PHP module imagick worked just fine even with x64 version of PHP and Apache 2.4 and imageMagick. I tried to make imagick to work with IIS8 but it wont work. I always get the typical PHP startup warning in my log PHP Startup: Unable to load dynamic library 'C:\Program Files (x86)\iis express\PHP\v5.4\ext\php_imagick.dll' - %1 is not a valid Win32 application. in Unknown on line 0 And the next thing why is IIS loading php from IIS express folder if I have php in the program files? But actually I dont care until it works :) So what I did so far I unistalled imageMagick 6.7.X 64bit version and installed the latest x86 version, tested it in command line and it worked, than I looked up on net the latest imagick DLL which was I think the 3.1.0RC2 (founded here http://www.peewit.fr/imagick/) than I copied the dll to PHP's ext folder than edited php.ini and added the imagick to the dynamic extensions after that I restarted IIS and than nothing :( I got the error which I wrote earlier. Today I installed PEAR package Installer because I read somewhere that someone made it work with it but he also mentioned, that he needed to comply wincache too. Isn't there any easier solutions to make it work? Could someone maybe write me a step by step guide how to make this work.

  Read the article

• Issues with creating a snapshot

  - by Andy Welcomer

  Hello everyone, We have a strange issue when attempting to create a snapshot in one of our regional environments. We have 4 VMs, 2 of them have mulitple VMDKs spread onto different datastores. When a snapshot is created, all the VMDKs (except for the first), seem to vanish. If you look at the properties of the VM, the path to the VMDKS points to the datastore where the primary VMDK is, and the file name is some random garbage. If the snapshot is deleted everything returns to normal. Has anyone ever seen this? I'm using ESX3.5 Thank you in advance. Andy ==============UPDATE============== Here is some more information. I just created a test machine with 7 VMDKs. 1 for the OS. and 6 others for data. All of the VMDKs are in seperate datastores. I take a snapshot of the machine, all of the 6 VMDKs loose their reference to the actual VMDK files. The all point to 64KB VMDK files in the datastore where the OS VMDK is located. These 64KB vmdks didn't exist until the snapshot was taken. When the snapshot is deleted, everything goes back to normal.

  Read the article

• Guide to particulars in preseeding Ubuntu Installer

  - by Oxwivi

  I've tried reading through guides for preseeding, but I did not understand how and where to modify which options. I can only comfortably learn through practical examples, for which I ask this question. I am looking into preseeding solution to just do a few specific tasks: Completely rewrite the packages installed by default, much like minimal installs Add a few proprietary applications to the default install list Automatically install and mount proprietary drivers on install and live session Edit the default configuration files for applications installed by default Specify partitions along with permission Can anyone please tell me how to configure preseed option to only do the above? PS The third point is of particular importance.

  Read the article

• Cause of slow download speed on a particular EC2 instance?

  - by James

  I have a networking issue I'm trying to solve. I have two EC2 instances, same zone, same type. On one of the two EC2 instances (the 'bad' instance), the download speed is really poor (200k/s), while on the other (the 'good' instance), the download speed is fine, comfortable at 30M/s +). To clarify, I'm talking about downloading files to the EC2 instance while ssh'd into the server, e.g running wget with a large file. I've tried different files, including S3 objects and a large linux ISO from elsewhere. Running ethtool eth0 only returns 'Link detected: yes' for both. When running ifconfig, both return the same for most part, aside from how the good instance shows no error packets yet the bad instance shows many: UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:168372370 errors:5075643 dropped:0 overruns:0 frame:0 TX packets:122116480 errors:0 dropped:0 overruns:0 carrier:0 Both servers are configured the same, at least were supposed to be. How can I go about diagnosing the cause for the slow download speed? Is there anything particular to EC2 instances that could cause this? Having trouble knowing where to start. Thanks for any help!

  Read the article

• I can't get Ubuntu installation to start

  - by tyler

  I have a computer with the following configuration: AZUS Sabertooth Motherboard Intel I5 2500 CPU Windows 7 installed I'm trying to install linux. I first attempted to install pin guy. I burned the ISO, booted from it, got the initial menu; attempting to either run the live version from DVD, or install to system. However the process stops at a blank screen with the blinking cursor in left corner. So I downloaded Ubuntu and got the same results. Then I tried wubi and ended up in the same position. EDIT: UEFI might be part of the problem? Based on the link below I have determined that the process will be too time consuming and or risky so I'm giving up. https://help.ubuntu.com/community/UEFIBooting

  Read the article

• How to set JS source directory in apache2?

  - by highBandWidth

  I am trying to run a very basic webserver for development/debugging. The static HTML seems to be delivered correctly, but it seems that the JavaScript libraries are not being delivered to the browser. The page HTML says something like <html> <head> <script type='text/javascript' src="/lib/json.js"></script> ... Now, I have set up a link for /lib/ in my httpd.conf as: Scriptalias /lib/ "/SomeFolder/lib/" When I do this, it can't fetch the files because this is what I see in my apache error log: ... [error] [client ::1] client denied by server configuration: /SomeFolder/lib/json.js, referer: http://localhost/SomeSite It seems that apache is not allowing access to the folder, so I add this to httpd.conf: Directory "/SomeFolder/lib/"> Allow from all </Directory> After this, browsing the page still does not run the JS, instead I see the following error in my apache error log: [error] [client ::1] (13)Permission denied: exec of '/SomeFolder/lib/json.js' failed, referer: http://localhost/SomeSite So now, it seems that apache is trying to run the JS files on the server like a cgi script or something. But I have not made that folder a cgi-bin folder. The only lines where SomeFolder is mentioned by name is in these lines in httpd.conf: Scriptalias /lib/ "/SomeFolder/lib/" Directory "/SomeFolder/lib/"> Allow from all </Directory>

  Read the article

• Serve most of a domain with Apache, but use mod_proxy to serve some URLs from Lighttpd

  - by Alex Pineda

  So we wish to host some pages on a new server with apache2, and embed some of our old content & functionality from another server with lighttpd in an iframe. I'm looking at this configuration from the apache docs (http://httpd.apache.org/docs/2.2/vhosts/examples.html#page-header) under "Using Virtual_host and mod_proxy" together. <VirtualHost *:*> ProxyPreserveHost On ProxyPass / http://192.168.111.2/ ProxyPassReverse / http://192.168.111.2/ ServerName hostname.example.com </VirtualHost> The only issue is that I want to proxy only on a subdomain, or even better, if I can keep the top domain and proxy only if the url contains a particular path ie. "/myprocess.php". So in essence the DNS will point to the apache2 as the "master router".

  Read the article

• Limiting access in Silverlight\Pivotviewer

  - by sparaflAsh

  I'm going to deploy a pivotviewer application. As some of you might know this silverlight application load a .cxml index file for a group of images. My need is to make .cxml file and image files not accessible for the user. Now, if I don't have a need I usually code like this in C# and the file is hosted in the documentroot: _cxml = new CxmlCollectionSource(new Uri("http://www.myurl.it/Collection.cxml", UriKind.Absolute)); This means that my cxml and then the images are available by http for everyone who knows the URI. I'm a newbie to server configuration, so any help/hint would be deeply appreciated. Someone suggested me to take the files out of the root, but it seems like I can't go to pick them up if they are not a URL in Silverlight. At least I didn't managed to understand how. Someone else suggested me to play with web.config file to hide URLs, but I don't really know where to start. My question is, what's the best practice to hide my stuff? Obviously I can edit the question if you need more details.

  Read the article

• postfix (for sending mail only) multiple domain setup

  - by seanl

  I have the following problem, I have a Centos 5.4 VPS hosting a few nginx sites (some static, some cakephp), I would like to be able to send email from each sites contact page through postfix to my google apps hosted email (different accounts for each site) so that apps can then send out an auto email to the person filling in the contact form etc I have a bare-bones postfix installation with the following added into the main.cf config file. from using this guide virtual_alias_domains = hash:/etc/postfix/virtual_alias_domains virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps (both of these files have been converted into db files using postmap) I have configured DNS correctly for each site and setup SPF records. (I'm aware R-DNS will still reference my actual hostname not the domain name and cause a possible spam issue but one thing at a time) I can telnet localhost and the helo localhost so that I can send a command line email from an address in the virtual_alias_domains to an email in the virtual_alias_maps file which seems sends without giving an error but it is sending to my local linux account not the email address specified. my question is am i approching this the wrong way in terms of the virtual alias mapping or is this even possible to do in the manner im trying. Any help is greatly appreciated thanks. my postconf -n outlook looks like this alias_database = hash:/etc/aliases alias_maps = hash:/etc/aliases command_directory = /usr/sbin config_directory = /etc/postfix daemon_directory = /usr/libexec/postfix debug_peer_level = 2 html_directory = no inet_interfaces = localhost mail_owner = postfix mailq_path = /usr/bin/mailq.postfix manpage_directory = /usr/share/man mydestination = $myhostname, localhost.$mydomain, localhost myhostname = myactual hostname mynetworks = 127.0.0.0/8 myorigin = $mydomain newaliases_path = /usr/bin/newaliases.postfix queue_directory = /var/spool/postfix readme_directory = /usr/share/doc/postfix-2.3.3/README_FILES sample_directory = /usr/share/doc/postfix-2.3.3/samples sendmail_path = /usr/sbin/sendmail.postfix setgid_group = postdrop unknown_local_recipient_reject_code = 550 virtual_alias_domains = hash:/etc/postfix/virtual_alias_domains virtual_alias_maps = hash:/etc/postfix/virtual_alias_maps

  Read the article

• Settings for multiple monitors are not stored

  - by JJD

  I am running Ubuntu 12.04. on a Lenovo Thinkpad T400. I connected an external monitor as a second display. The laptop stands under the external screen. The laptop has a native resolution of 1440x900 (16:10), the external monitor 1280x1024 (5:4). There are two graphic adapters: one internal Intel GMA 4500 MHD and an discrete ATI card. Currently, the integrated Intel is enabled. I use the Display application to arrange the position of the monitors so it look like this: The problem: Whenever I restart my computer the configuration gets lost. First, the displays are mirrored instead of extended. I have to press Fn + F7 two times to switch to extended mode. Second, the Display settings still look like this: I know this worked once when I was running Ubuntu 10.10. I cannot tell since when it does not work. Do you know how I can permanently store the settings?

  Read the article

• Post Deploy MAAS cleanup

  - by David Buttrick

  I have a mostly working MAAS cluster. I'm still learning juju, but while I'm doing that, I wanted to take this opportunity to do some clean-up tasks. Here are my goals: Configure ntp on the nodes. Set the video mode on the nodes. Set the timezone on the nodes. Are these juju tasks? Or is this better attacked by mounting the disk image on the MAAS host, and doing the configuration there? If I do it that way, how do I get the nodes to recognize that they have to re-install the image to pickup my changes? Thank you. David

  Read the article

• Cannot connect to secure wireless with Netgear wna3100 USB

  - by Vince Radice

  I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

  Read the article

• memcache fast-cgi php apache 2.2 windows 7 creating problems

  - by Ahmad

  hi, i am trying to run memcache, fast-cgi with apache 2.2 + php on a windows 7 machine. if i dont use memcache everything works fine. the moment i disable extension=php_memcache.dll in php.ini everything returns to normal. once i start apache, the apache logs say: [Wed Jan 12 18:19:23 2011] [notice] Apache/2.2.17 (Win32) mod_fcgid/2.3.6 configured -- resuming normal operations [Wed Jan 12 18:19:23 2011] [notice] Server built: Oct 18 2010 01:58:12 [Wed Jan 12 18:19:23 2011] [notice] Parent: Created child process 412 [Wed Jan 12 18:19:23 2011] [notice] Child 412: Child process is running [Wed Jan 12 18:19:23 2011] [notice] Child 412: Acquired the start mutex. [Wed Jan 12 18:19:23 2011] [notice] Child 412: Starting 64 worker threads. [Wed Jan 12 18:19:23 2011] [notice] Child 412: Starting thread to listen on port 80. and after accessing the page [the page just has echo phpinfo()]. i get this error in the error.log [Wed Jan 12 18:20:54 2011] [warn] [client 127.0.0.1] (OS 109)The pipe has been ended. : mod_fcgid: get overlap result error [Wed Jan 12 18:20:54 2011] [error] [client 127.0.0.1] Premature end of script headers: index.php i have php_memcache.dll in my ext directory and httpd.conf is like this: LoadModule fcgid_module modules/mod_fcgid.so FcgidInitialEnv PHPRC "c:/php" FcgidInitialEnv PATH "c:/php;C:/WINDOWS/system32;C:/WINDOWS;C:/WINDOWS/System32/Wbem;" FcgidInitialEnv SystemRoot "C:/Windows" FcgidInitialEnv SystemDrive "C:" FcgidInitialEnv TEMP "C:/WINDOWS/Temp" FcgidInitialEnv TMP "C:/WINDOWS/Temp" FcgidInitialEnv windir "C:/WINDOWS" FcgidIOTimeout 64 FcgidConnectTimeout 32 FcgidMaxRequestsPerProcess 500 <Files ~ "\.php$>" AddHandler fcgid-script .php FcgidWrapper "c:/php/php-cgi.exe" .php </Files> so the problem has to be related to memcache coz if i disable it, fast-cgi seems to be working fine. any possible reasons for this?? the memcache service is running.. i can check it through control panel-services

  Read the article

< Previous Page | 905 906 907 908 909 910 911 912 913 914 915 916  | Next Page >