Search Results

Search found 8185 results on 328 pages for 'capture card'.

Page 91/328 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• asus n550jv audio problem: no sound from notebook' speakers

  - by skywalker

  Ubuntu 13.10. The problem is: the internal speakers don't work. I have no problem when I'm using the headphones. There is no hardware issue since in windows 8 everything works perfectly(external subwoofer included). I'm trying to modify /etc/modprobe.d/alsa-base.conf but I can't find the correct model to put into: options snd-hda-intel model= The file HD-Audio-Models.txt doesn't contain the model for ALC668. Some info: :~sudo aplay -l **** List of PLAYBACK Hardware Devices **** card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: PCH [HDA Intel PCH], device 0: ALC668 Analog [ALC668 Analog] Subdevices: 0/1 Subdevice #0: subdevice #0 :~$ sudo lspci -v | grep -A7 -i "audio" 00:03.0 Audio device: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor HD Audio Controller (rev 06) Subsystem: Intel Corporation Device 2010 Flags: bus master, fast devsel, latency 0, IRQ 52 Memory at f7a14000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Kernel driver in use: snd_hda_intel -- 00:1b.0 Audio device: Intel Corporation 8 Series/C220 Series Chipset High Definition Audio Controller (rev 04) Subsystem: ASUSTeK Computer Inc. Device 11cd Flags: bus master, fast devsel, latency 0, IRQ 53 Memory at f7a10000 (64-bit, non-prefetchable) [size=16K] Capabilities: [50] Power Management version 2 Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ Capabilities: [70] Express Root Complex Integrated Endpoint, MSI 00 Capabilities: [100] Virtual Channel PS info :~$ amixer -c 0 Simple mixer control 'IEC958',0 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',1 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] Simple mixer control 'IEC958',2 Capabilities: pswitch pswitch-joined Playback channels: Mono Mono: Playback [on] :~$ pacmd dump-volumes Welcome to PulseAudio! Use "help" for usage information. Sink 0: reference = 0: 76% 1: 76%, real = 0: 76% 1: 76%, soft = 0: 100% 1: 100%, current_hw = 0: 76% 1: 76%, save = yes Input 8: volume = 0: 100% 1: 100%, reference_ratio = 0: 100% 1: 100%, real_ratio = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, volume_factor = 0: 100% 1: 100%, volume_factor_sink = 0: 100% 1: 100%, save = no Source 0: reference = 0: 100% 1: 100%, real = 0: 100% 1: 100%, soft = 0: 100% 1: 100%, current_hw = 0: 100% 1: 100%, save = no Source 1: reference = 0: 16% 1: 16%, real = 0: 16% 1: 16%, soft = 0: 100% 1: 100%, current_hw = 0: 16% 1: 16%, save = yes

  Read the article

• How to get D-Link DWA-547 working on Ubuntu 13.10?

  - by Tan Kah Ping

  I got a D-Link DWA-547 Wifi card which is supposed to work out-of-the-box with Linux. Says so here: http://wireless.kernel.org/en/users/Drivers/ath9k/products/external While lspci does list the device, NetworkManager doesn't seem to allow me to configure Wifi. lsmod also shows that ath9k isn't loaded. Manually loading with 'modprobe ath9k' doesn't help. How do I get this card working on Ubuntu 13.10 64-bit?

  Read the article

• Screen corruption with 946G / 82945G/GZ [closed]

  - by Ferdinandhi

  Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks the GUI as you see in the image and the entire computer is very slow. I'm running Ubuntu 11.04 and have a Intel graphics card 945G x86/MMX/SSE2. I used Unity and Gnome 3 with the same results. lspci returns 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

  Read the article

• Wondering How Good The Radeon 9700 Pro Drivers Are? Then Just Read Along

  The Radeon 9700 pro drivers is a high-quality card that is at the zenith of the charts based on 3D ground and is a strong competitor to the NVIDIA card. This is the epitome of all the gaming cards an... [Author: Sunny Makkar - Computers and Internet - March 20, 2010]

  Read the article

• blacklist VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE

  - by Thomas Labensi

  I have an hp a310n pavillion I have installed an nvidia pci geforce card I want to blacklist the VGA compa[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03)integrated graphics what do I need to do?? tom@tom-DM167A-ABA-a310n:~$ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 03) 02:09.0 VGA compatible controller: NVIDIA Corporation NV11 [GeForce2 MX/MX 400] (rev b2) tom@tom-DM167A-ABA-a310n:~$ I'm using the nvidia via neuvoux and I want to really make sure I'm using the nvidia card

  Read the article

• Screen corruption with 946G / 82945G/GZ

  - by Ferdinandhi

  Since version 10.04 I have problems with Ubuntu (I think) my graphics card. This problem arises especially when working with graphics or CPU usage much. The problem is that it breaks1 the GUI as you see in the ![image and the entire computer is very slow: I'm running Ubuntu 11.04 and Intel graphics card 945G x86/MMX/SSE2 I used Unity and Gnome 3 with the same results. lspci--- 00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)

  Read the article

• Wireless is disabled by hardware switch on Dell Inspiron 1750

  - by lowerkey

  I have a problem where Ubuntu (12.04) says there is a wireless network card, but it is disabled by a hardware switch. How do I turn it on? I checked the BIOS, and the wireless card is enabled there. Fn + F2 was also no success. The results of rfkill list: 0: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes 1: dell-wifi: Wireless LAN Soft blocked: yes Hard blocked: yes sudo rfkill unblock wifi did nothing to the Wireless Status.

  Read the article

• OS8- AK8- The bad news...

  - by Steve Tunstall

  Ok I told you I would give you the bad news of AK8 to go along with all the cool new stuff, so here it is. It's not that bad, really, just things you need to be aware of. First, the 2013.1 code is being called OS8, AK8 and 2013.1 by different people. I mean different people INSIDE Oracle!! It was supposed to be easy, but it never is. So for the rest of this blog entry, I'm calling it AK8. AK8 is not compatible with the 7x10 series. Ever. The 7x10 series is not supported with AK8, and if you try to upgrade one, it will fail at the healthcheck. All 7x20 series, all of them regardless of age, are supported with AK8. Drive trays. Let's talk about drive trays and SAS cards. The older drive trays for the 7x20 series were called the "Riverwalk 2" or "DS2" trays. They were technically the "J4410" series JBODs that Sun used to sell a la carte before we stopped selling JBODs. Don't get me started on that, it still makes me mad. We used these for many years, and you can still buy them right now until December 15th, 2013, when they will no longer be sold. The DS2 tray only came as a 4u, 24 drive shelf. It held 3.5" drives, and you had a choice of 2TB, 3TB, 300GB or 600GB drives. The SAS HBA in the 7x20 series was called a "Thebe" card, with a part # of 7105394. The 7420, for example, came standard with two of these "Thebe" cards for connecting to the disk trays. Two Thebe cards could handle up to 12 trays, so one would add two more cards to go to 24 trays, or have up to six Thebe cards to handle 36 trays. This card was for external SAS only. It did not connect to the internal OS drives or the Readzillas, both of which used the internal SCSI controller of the server. These Riverwalk 2 trays ARE supported with AK8. You can upgrade your older 7420 or 7320, no problem, as-is. The much older Riverwalk 1 trays or J4400 trays are NOT supported by AK8. However, they were only used by the 7x10 series, and we already said that the 7x10 series was not supported. Here's where it gets tricky. Since last January, we have been selling the new style disk trays. We call them the "DE2-24P" and the "DE2-24C" trays. The "C" tray is for capacity drives, which are 3.5" 3TB or 4TB drives. The "P" trays are for performance drives, which are 2.5" 300GB and 900GB drives. These trays are NOT Riverwalk 2 trays, even though the "C" series may kind of look like it. Different manufacturer and different firmware. They are not new. Like I said, we've been selling them with the 7x20 series since last January. They are the only disk trays we will be selling going forward. Of course, AK8 supports them. So what's the problem? The problem is going to be for people who have to mix drive trays. Remember, your older 7x20 series has Thebe SAS2 HBAs. These have 2 SAS ports per card.  The new ZS3-2 and ZS3-4 systems, however, have the new "Thebe2" SAS2 HBAs. These Thebe2 cards have 4 ports per card. This is very cool, as we can now do more SAS channels with less cards. Instead of needing 4 SAS cards to grow to 24 trays like we did with the old Thebe cards, I can now do 24 trays with only 2 Thebe2 cards. This means more IO slots for fun things like Infiniband and 10G. So far, so good, right? These Thebe2 cards work with any disk tray. You can even mix older DS2 trays with the newer DE2 trays in the same system, as long as you have Thebe2 cards. Ah, there's your problem. You don't have Thebe2 cards in your old 7420, do you? Well, I told you the bad news wasn't that bad, right? We can take out your Thebe cards and replace them with Thebe2. You can then plug your older DS2 trays right back in, and also now get newer DE2 trays going forward. However, it's important that the trays are on different SAS channels. You can mix them in the same system, but not on the same channel. Ask your local SC if you need help with the new cable layout. By the way, the new ZS3-2 and ZS3-4 systems also include a new IO card called "Erie" cards. These are for INTERNAL SAS to the OS drives and the Readzillas. So those are now SAS2 instead of SATA like the older models. Yes, the Erie card uses an IO slot, but that's OK, because the Thebe2 cards allow us to use less SAS HBAs to grow the system, right? That's it. Not too much bad news and really not that bad. AK8 does not support the 7x10 series, and you may need new Thebe2 cards in your older systems if you want to add on newer DE2 trays. I think we can all agree that there are worse things out there. Like our Congress.   Next up.... More good news and cool AK8 tricks. Such as virtual NICS. 

  Read the article

• Upgrade to 11.10 caused rt2800usb module to be blacklisted

  - by Shevek

  I just upgraded from Kubuntu 11.04 to 11.10, and I noticed that after the upgrade my USB wireless card was no longer recognized. It turns out that the rt2800usb module had been added (automatically, I assume, unless previously the module had been loading despite being blacklisted) to /etc/modprobe.d/blacklist.conf. I re-enabled the wireless card by commenting out the blacklist line and adding rt2800usb to /etc/modules, but I was wondering if there was a reason for rt2800usb being added to the blacklist.

  Read the article

• Screen blink twice every 10 seconds on ubuntu 12.04

  - by Erik

  On 12.04 64-bit, about every 5 seconds my screen blinks twice. Even during installation of Ubuntu from CD, this happens during the complete process. I had no problems with earlier Ubuntu versions (earlier version was 10.04LTS 64-bit) System specs: I7-2600K MSI 7681 Motherboard 16 GB RAM 2 x Nvidia 560 card SLI (only 1 screen on 1 card active during install process) This flickering is driving me crazy, please help.

  Read the article

• Drivers for Sony Ericsson Phones

  - by user93671

  I'm trying to locate a driver to access my memory card inside my Sony Ericsson Walkman phone. I have 12.04 and it doesn't seem to recognize it. Ideally I would like to install the entire PC Suite that came with the phone, but I'll just settle to access the memory card so I can add music when I need too. I tried using mass storage mode, media transfer, phone mode, even print mode and still nothing.

  Read the article

• Accidentally deleted /etc/X11/xorg.conf.original, and now login no longer works

  - by Cester Nilap

  I accidentally deleted xorg.conf.original-0; xorg.conf.fglrx xorg.conf.fglrx-0-1, after I tried to install fglrx drivers on the graphics card, which in fact worked on 13.04 and now as I went to 13.10 has not worked. Now I can just switch to a new TTY with: Ctrl + Alt + F2 I found this which is for nVidia cards TO install the fglrx drivers for graphic card I used this tutorial Is there any possibility that I can recover, replace, rebuilb that xorg.conf.original-0, and if exists any possibility where I could start from.

  Read the article

• How to make Google SketchUp work with Intel graphics in Wine?

  - by haltman

  Hi, everybody! My pc has an Intel DH57JG mainboard, I've installed wine, launching sketchup I receive error that I don't have OpenGL installed, is there a way to configure/install it? On my previous pc with an NVidia video card installing official NVidia driver resolved it. Is there is a way to do the same with the Intel card? Running locate libgl on a terminal returns no results. thanks in advance.

  Read the article

• Which driver should I use with a 9600 GT Mobile?

  - by lisalisa

  I checked the Additional Drivers offered for my card and I saw four options: NVIDIA accelerated graphics drivers (version 173) NVIDIA accelerated graphics drivers (post-release updates) (version 173-updates) NVIDIA accelerated graphics drivers (version current) (Recommended) NVIDIA accelerated graphics drivers (post-release updates)(version current-updates) I'm not sure which one to pick. I want a driver that's stable but also takes advantage of my card's hardware.

  Read the article

• Nvidia problem after inappropriate shut down

  - by bhappy

  Hi, After by battery died on my laptop I started my computer after plugging it to the ac adapter, for no reason that I know I cant use the visual effects any more as if my graphic card is not installed (my graphic card is GeForce 300m and nvidia x-settings is working) I tried generating a new xorg.conf file but nothing happened I marked all the installed nvidia driver in synaptic for re installation and didn't really help I googled the problem appears to be popular but couldn't find a solid solution Any Ideas ?

  Read the article

• How can I improve the battery life under 12.04 on my Inspiron 14z? [duplicate]

  - by cfogelberg

  This question already has an answer here: Tips to extend battery life for laptops and notebooks 24 answers How do I improve the battery life of my Inspiron 14z under Ubuntu 12.04? This laptop gets 4-5 hours of battery life using Windows (e.g. here). I've removed Windows, installed Ubuntu 12.04 and the initial battery life was only 2 hours. With some tweaks (described below) it's still only ~2.5 hours. For reference, the laptop is the latest model of the 14z: i5-3337U processor 32GB MSATA, 500GB HDD (5400rpm) AMD Radeon HD7570M graphics card I have put ext4 partitions on both the SSD and the HDD, and have mounted / to the SSD and /home to the HDD. I also put a 24gb linux swap partition at the start of the HDD, though I figure this won't be used all that much (the laptop has 8gb of RAM). After googling around and reading Ask Ubuntu and other sites extensively, I have done the following steps, and they have improved the battery life ~30 minutes (exact improvement not clear, but battery life is still nowhere near 4-5 hours). Installed Jupiter (and set Performance to "Power Saving") Installed laptop-mode-tools cat /proc/sys/vm/laptop_mode now outputs 5 (previously it output 0) But it's not clear that this will help: AskUbuntu question Turned down the brightness of my screen from full to 1/3 Other things I have heard about but have not tried for fear of frying the laptop or my linux install: Add "pcie_aspm=force" at the end of the line with "quiet splash" in /boot/grub/grub.cfg Enable ALPM, but it may already be enabled in 12.04? Enable i915 framebuffer compression Use a propietary driver for the graphics card? Turn off the graphics card? (what would happen if I relied on the internal Intel bridge?) Use TLP? Spin down the HDD more aggressively (howto, but I think laptop-mode-tools does this already) The only other thing I've noticed is that plastic just above the F5, F6 and F7 keys gets really hot. According to Jupiter my CPU temperature is only 69 celsius and the System Monitor shows CPU load at 7% so I don't think it's the CPU. Maybe it's the graphics card? Also, I've set up MongoDB and LAMP on the machine as well. When I run powertop MongoDB is high in the list, but I'm not sure if that's relevant to battery life because I'm not actually doing anything with MongoDB most of the time. Edit - Additional info as requested $ lspci -nnk | grep -iEA3 "(graphics|vga)" 00:02.0 VGA compatible controller [0300]: Intel Corporation Ivy Bridge Graphics Controller [8086:0166] (rev 09) Subsystem: Dell Device [1028:057f] Kernel driver in use: i915 Kernel modules: i915 -- 02:00.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Thames [Radeon 7500M/7600M Series] [1002:6841] Subsystem: Dell Device [1028:057f] Kernel driver in use: radeon Kernel modules: radeon

  Read the article

• Screen going blank

  - by Deena

  When I am watching videos via VLC or watching videos in Firefox - even when I simply click DASH HOME - Screen goes blank - nothing working - I needed to restart to recover. Not sure which is causing this issue. Is it because of Graphics Card problem - Not installed any proprietary drivers. OS : Ubuntu 12.04 Graphics Card : 1 GB - [AMD/ATI] RV710 [Radeon HD 4350/4550] Could you help me on this. Regards, Deena

  Read the article

• Running crysis 2 on ubuntu gives me an error message

  - by ShajD

  so i recently installed ubuntu alongside windows 7 and i installed crysis 2 with wine. crysis 2 works fine when i run windows, however when i run it using wine in ubuntu cryengine gives me a message saying, "Unsupported video card detected! Continuing to run migth lead to unexpected results or crashes....." i've got two video cards ones an intel and the other's a nvidia. i typed lspci into the terminal and my nvidia card was listed under video controller as well

  Read the article

• My sound is not working

  - by gkhan

  I am not able to hear any sound. Does anyone have a clue how to proceed in fixing this? Issuing aplay gives this $ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: NVidia [HDA NVidia], device 0: VT1708S Analog [VT1708S Analog] Subdevices: 2/2 Subdevice #0: subdevice #0 Subdevice #1: subdevice #1 card 0: NVidia [HDA NVidia], device 1: VT1708S Digital [VT1708S Digital] Subdevices: 1/1 Subdevice #0: subdevice #0

  Read the article

• In a GUI based Application in Linux It is working properly in some systems,But segmentation fault (Because of SIGSEGV signal) is coming in others.Why? [closed]

  - by Sreejith

  The application consists of Driver code,a Source Object file(.so) ,and a Application code to interact with a hardware Card.. The problem comes in a mmap().It reads address from a card. But it is not getting the correct address in some systems.The Error is because of It is receiving a SIGSEGV signal and segmentation fault followed to that.But in some system which having the same version of kernel is not at all facing the problem and working properly. So please any one suggest the Reason and Remedy for this Problem.

  Read the article

• update manager has killed wifi after i finally got it working [closed]

  - by Bobble Off

  HI i had just got my wifi to work properly in 12.04 and I got a pop up from update manager saying there was 100's of updates I needed to install so i installed them it then said I needed to reboot which I did but now my wifi isn't working I go add a new connection and I have no wifi option just Ethernet also the pci card is showing no signs of life (the green light is not light) but when i go in to terminal and type lspci it is showing my wifi card in the list whats gone wrong and how do i fix it???

  Read the article

• Unity does not start after installing the fglrx drivers on 12.10 [closed]

  - by f.mcleash

  I installed Ubuntu 12.10 and at first when I go to check the system information I used to have (unknown) on the graphic card section, I used the synaptic manager and downloaded the fglrx, after that I restarted my laptop and now I don't have any menus, all of them are gone. Now I am only using the keyboard shortcuts to use Ubuntu. My graphic card is AMD ATI. What can I do to bring the menus back?

  Read the article

• so disappointed at ubuntu 12.04 [closed]

  - by Min

  it's been almost a month I've installed ubuntu I can't afford windows cd anymore it is my fault that I didn't dual boot it but, it doesn't make sense in that I can't use my own graphic card in my own computer because certain company doesn't support the driver card for the OS it is seemingly ridiculous that I can't even run a simple 2d game or not even a flash game with this OS a video of 480 and up doesn't run for closely a month I've tried my best to run everything my computer spec provides, but nothing works. not even sound quality

  Read the article

• Routing Internet traffic over specific network interfaces [on hold]

  - by dipamchang

  I want to route my internet traffic over all my available connections (like LAN and Data card(3G)), based on conditions like, if a website is blocked over LAN, that traffic goes through Data Card (or other available internet connection). My ultimate motive is to integrate this feature in my web browser which I have already built using C# and .Net framework. I have found that one can add a route by using the following cmd command - route add DestinationIP mask subnet InterfaceGatewayIP but I am stuck as to how should it be implemented using C#?

  Read the article

• codingbat wordEnds using regex

  - by polygenelubricants

  I'm trying to solve wordEnds from codingbat.com using regex. This is the simplest as I can make it with my current knowledge of regex: public String wordEnds(String str, String word) { return str.replaceAll( String.format( ".*?(?=%s)(?<=(.|^))%1$s(?=(.|$))|.+", java.util.regex.Pattern.quote(word) ), "$1$2" ); } String.format is used to inject word into the pattern for both readability and convenience (it's injected twice). Pattern.quote isn't necessary to pass their tests, but I think it's required for a proper regex-based solution. The regex has two major parts: If after matching as few characters as possible ".*?", word can still be found "(?=%s)", then lookbehind to capture any character immediately preceding it "(?<=(.|^))", match word "%1$s" and lookforward to capture any character following it "(?=(.|$))". The initial "if" test ensures that the atomic lookbehind captures only if there's a word Using lookahead to capture the following character doesn't consume it, so it can be used as part of further matching Otherwise match what's left "|.+" Groups 1 and 2 would capture empty strings I think this works in all cases, but it's obviously quite complex. I'm just wondering if others can suggest a simpler regex to do this. Note: I'm not looking for a solution using indexOf and a loop. I want a regex-based replaceAll solution. I also need a working solution that I can just copy-paste into codingbat and passes.

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >