Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 91/194 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • Which LAN card / module combinations proven to work with Wake on LAN

    - by pablomo
    I've got a 12.04 headless server that I've been trying to get to work with wake-on-lan. The card is Marvel 88E8053 using the sky2 module. Although WOL is enabled in BIOS and ethtool shows the card as WOL enabled, it refuses to wake when I send the magic packet. I have verified that the packet is being received OK when the machine is on. The machine does wake OK from a BIOS alarm which suggests it is a network card issue. I've seen reference to bugs in sky2 that mean WOL fails in recent versions of Ubuntu (and have tried a module conf file as suggested here but to no avail) So I am thinking the best bet is to replace the ethernet card with one that definitely works with WOL in 12.04 - please could you post your card make and model no if you are using it successfully?

    Read the article

  • How to get the mic on the Creative X-Mod soundcard working correctly?

    - by Nyamiou The Galeanthrope
    Well, I have this problem for a while now. When my computer start the mic seem to work but it's like it's muted. I have to go to a terminal and type alsamixer -c 1 and then I set up PCM Capture Source on Line and set up it back to Mic to get the mic actually working. Is there is a way to do this automatically or to solve the problem. I use a special workaround on this card because of the bug #429642. My workaround is having this at the end of my /usr/share/pulseaudio/alsa-mixer/profile-sets/default.conf : [Mapping xmod-stereo-out] device-strings = surround51:%f description = Analog Stereo Creative Xmod channel-map = front-left,front-right paths-output = analog-output analog-output-headphones analog-output-mono analog-output-lfe-on-mono paths-input = analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line priority = 10 Maybe the bug come from here, maybe I have to change something. Thank you for any help.

    Read the article

  • How to enable compression in WAMP installed on Windows Server?

    - by Mehdi Jalal
    How to enable compression in WAMP running on Windows Server 2008? I searched the net and I followed these steps given here: http://www.zigpress.com/2009/04/09/enabling-gzip-on-wamp/. But after restarting my WAMP the icon got yellow not green. Than followed this post: http://forum.wampserver.com/read.php?2,93406. Again the same problem my WAMP icon after restarting gets yellow. This is the code I put in Apache httpd.conf: <ifmodule mod_deflate.c> AddOutputFilterByType DEFLATE text/html text/plain text/xml text/css text/javascript application/x-javascript application/javascript </ifmodule>

    Read the article

  • Tomcat still running after uninstalling

    - by Rohit Jain
    I installed tomcat7 using the following command: sudo apt-get install tomcat7 Then to uninstall it, I used below command: sudo dpkg -l|grep tomcat This listed all the packages related to tomcat. Then I removed tomcat7: sudo dpkg -P tomcat7 After that, I saw that, some related package were still there, and surprisingly I was still able to access the tomcat home page at - http://localhost:8080. So, I tried to remove it using the following command: sudo apt-get remove tomcat7 sudo apt-get autoremove But, still I was able to access the tomcat home page. So I re-booted my PC, thinking that the effect will take effect after that. But again, I'm still able to access the homepage. That means that tomcat is still running on my PC. What's going on here? Have I followed the steps correctly to uninstall tomcat. I want to uninstall to re-install a private instance of tomcat. I found out that the directory - /usr/share/tomcat7, is still there: /usr/share/tomcat7$ ls conf log webapps Is it something to do with the uninstallation?

    Read the article

  • How do I install Dan's Guardian on 12.04?

    - by Matt
    I'm trying to install Dans Guardian on a virtual machine. The instructions ask me to run the ./configure script and then execute the command make install. The configure script runs fine but the make install throws errors. Making all in src make[2]: Entering directory `/webmin/dansguardian-2.10/src' g++ -DHAVE_CONFIG_H -I. -I.. -D__CONFFILE='"/usr/local/etc/dansguardian/dansguardian.conf"' -D__LOGLOCATION='"/usr/local/var/log/dansguardian/"' -D__PIDDIR='"/usr/local/var/run"' -D__PROXYUSER='"nobody"' -D__PROXYGROUP='"nobody"' -D__CONFDIR='"/usr/local/etc/dansguardian"' -g -O2 -MT dansguardian-fancy.o -MD -MP -MF .deps/dansguardian-fancy.Tpo -c -o dansguardian-fancy.o `test -f 'downloadmanagers/fancy.cpp' || echo './'`downloadmanagers/fancy.cpp downloadmanagers/fancy.cpp: In member function âstd::string fancydm::timestring(int)â: downloadmanagers/fancy.cpp:507:72: error: âsnprintfâ was not declared in this scope make[2]: *** [dansguardian-fancy.o] Error 1 make[2]: Leaving directory `/webmin/dansguardian-2.10/src' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/webmin/dansguardian-2.10' make: *** [all] Error 2 I'm running 12.04 LTS server x64

    Read the article

  • Out of disk space - /boot at 100%

    - by uvasal
    My /boot is at 100%. When I run aptitude search ~ilinux-image I'm getting loads of unused images. When I try to delete one of them (after checking which one is currently in use by doing uname -r), e.g apt-get autoremove linux-image-3.2.0-44-generic I get: Reading package lists... Done Building dependency tree Reading state information... Done You might want to run 'apt-get -f install' to correct these: The following packages have unmet dependencies: linux-generic : Depends: linux-headers-generic (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed linux-server : Depends: linux-headers-server (= 3.2.0.51.61) but 3.2.0.54.64 is to be installed E: Unmet dependencies. Try 'apt-get -f install' with no packages (or specify a solution). And running apt-get -f install throws No space left on device. I've also tried doing apt-get purge but I am getting the same thing. Output of df -h and dpkg -l linux-*.: root@hb2088:/srv/www# df -h Filesystem Size Used Avail Use% Mounted on /dev/sda3 9.4G 3.0G 6.0G 34% / udev 301M 4.0K 301M 1% /dev tmpfs 124M 228K 124M 1% /run none 5.0M 0 5.0M 0% /run/lock none 309M 0 309M 0% /run/shm /dev/sda1 92M 91M 0 100% /boot root@hb2088:/srv/www# dpkg -l linux-* Desired=Unknown/Install/Remove/Purge/Hold | Status=Not/Inst/Conf-files/Unpacked/halF-conf/Half-inst/trig-aWait/Trig-pend |/ Err?=(none)/Reinst-required (Status,Err: uppercase=bad) ||/ Name Version Description +++-====================================================-====================================================-======================================================================================================================== un linux-doc-3.2.0 <none> (no description available) ii linux-firmware 1.79.6 Firmware for Linux kernel drivers iU linux-generic 3.2.0.51.61 Complete Generic Linux kernel un linux-headers <none> (no description available) un linux-headers-3 <none> (no description available) un linux-headers-3.0 <none> (no description available) ii linux-headers-3.2.0-44 3.2.0-44.69 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-44-generic 3.2.0-44.69 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-45 3.2.0-45.70 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-45-generic 3.2.0-45.70 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-48 3.2.0-48.74 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-48-generic 3.2.0-48.74 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-51 3.2.0-51.77 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-51-generic 3.2.0-51.77 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP ii linux-headers-3.2.0-52 3.2.0-52.78 Header files related to Linux kernel version 3.2.0 ii linux-headers-3.2.0-52-generic 3.2.0-52.78 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-3.2.0-54 3.2.0-54.82 Header files related to Linux kernel version 3.2.0 iU linux-headers-3.2.0-54-generic 3.2.0-54.82 Linux kernel headers for version 3.2.0 on 64 bit x86 SMP iU linux-headers-generic 3.2.0.54.64 Generic Linux kernel headers iU linux-headers-server 3.2.0.54.64 Linux kernel headers on Server Equipment. un linux-image <none> (no description available) un linux-image-3.0 <none> (no description available) ii linux-image-3.2.0-44-generic 3.2.0-44.69 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-45-generic 3.2.0-45.70 Linux kernel image for version 3.2.0 on 64 bit x86 SMP ii linux-image-3.2.0-48-generic 3.2.0-48.74 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-51-generic 3.2.0-51.77 Linux kernel image for version 3.2.0 on 64 bit x86 SMP iF linux-image-3.2.0-52-generic 3.2.0-52.78 Linux kernel image for version 3.2.0 on 64 bit x86 SMP in linux-image-3.2.0-54-generic <none> (no description available) iU linux-image-generic 3.2.0.51.61 Generic Linux kernel image iU linux-image-server 3.2.0.51.61 Linux kernel image on Server Equipment. un linux-initramfs-tool <none> (no description available) un linux-kernel-headers <none> (no description available) un linux-kernel-log-daemon <none> (no description available) ii linux-libc-dev 3.2.0-52.78 Linux Kernel Headers for development un linux-restricted-common <none> (no description available) iU linux-server 3.2.0.51.61 Complete Linux kernel on Server Equipment. un linux-source-3.2.0 <none> (no description available) un linux-tools <none> (no description available) Output of du -sh /boot/*: root@hb2088:~# du -sh /boot/* 781K /boot/abi-3.2.0-44-generic 781K /boot/abi-3.2.0-45-generic 781K /boot/abi-3.2.0-48-generic 781K /boot/abi-3.2.0-51-generic 781K /boot/abi-3.2.0-52-generic 139K /boot/config-3.2.0-44-generic 139K /boot/config-3.2.0-45-generic 139K /boot/config-3.2.0-48-generic 139K /boot/config-3.2.0-51-generic 139K /boot/config-3.2.0-52-generic 1.6M /boot/grub 14M /boot/initrd.img-3.2.0-44-generic 14M /boot/initrd.img-3.2.0-45-generic 14M /boot/initrd.img-3.2.0-48-generic 12K /boot/lost+found 174K /boot/memtest86+.bin 176K /boot/memtest86+_multiboot.bin 2.8M /boot/System.map-3.2.0-44-generic 2.8M /boot/System.map-3.2.0-45-generic 2.8M /boot/System.map-3.2.0-48-generic 2.8M /boot/System.map-3.2.0-51-generic 2.8M /boot/System.map-3.2.0-52-generic 4.8M /boot/vmlinuz-3.2.0-44-generic 4.8M /boot/vmlinuz-3.2.0-45-generic 4.8M /boot/vmlinuz-3.2.0-48-generic 4.8M /boot/vmlinuz-3.2.0-51-generic 4.8M /boot/vmlinuz-3.2.0-52-generic

    Read the article

  • DNS add-on domain setup and redirect

    - by brian
    I have several domains which I'd like to point to another (I'll call it foo.com). A couple of things aren't entirely clear to me. First, the DNS. I'm using Kloxo/HyperVM. Do I need to create separate DNS entries for each domain? Or do I just create separate CNAME or other records under foo.com? I thought it was the latter but when I click on "Add CNAME" I'm prompted to fill in the subdomain portion of foo.com. The nameservers have already been set to point to my VPS. For the redirect, would the following be appropriate within the vhost conf for foo.com? ServerName www.foo.com ServerAlias foo.com foo.net foo.org bar.com bar.net bar.org RewriteCond %{HTTP_HOST} ^foo.com [NC] RewriteCond %{HTTP_HOST} *foo.net [NC,OR] RewriteCond %{HTTP_HOST} *foo.org [NC,OR] RewriteCond %{HTTP_HOST} *bar.com [NC,OR] RewriteCond %{HTTP_HOST} *bar.net [NC,OR] RewriteCond %{HTTP_HOST} *bar.org [NC] RewriteRule ^(.*)$ http://www.foo.com/$1 [R=301,NC] (The first condition is just to force the "www" part)

    Read the article

  • How can I automatically change the system keyboard layout when plugging in an external keyboard?

    - by Andrew Bolster
    I have a US-Style laptop, which is fine, but I also have a UK-style Ergonomic USB keyboard. As such I usually have the US key layout set, but when I settle in at my desk and use the UK USB keyboard I find myself making stupid mistakes on symbols (normally a pretty good touch typist on either ergo or standard kbd). Can anyone think of a clean way of setting the keyboard layout based on the inferred layout/USBID of any plugged in Keyboard? Even having a custom setting such as adding a specific USB ID to a runtime script that checks if its plugged in or not. Can this be done without the user having to logout/in? I remember doing something similar with xorg.conf, but that required logout.

    Read the article

  • BIND9 server not responding to external queries

    - by Twitchy
    I have set up a BIND server on my dedicated box which I want to host a nameserver for my domain on. When I use dig @202.169.196.59 nzserver.co.nz locally on the server I get the following response... ; <<>> DiG 9.8.1-P1 <<>> @202.169.196.59 nzserver.co.nz ; (1 server found) ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 43773 ;; flags: qr aa rd ra; QUERY: 1, ANSWER: 1, AUTHORITY: 2, ADDITIONAL: 2 ;; QUESTION SECTION: ;nzserver.co.nz. IN A ;; ANSWER SECTION: nzserver.co.nz. 3600 IN A 202.169.196.59 ;; AUTHORITY SECTION: nzserver.co.nz. 3600 IN NS ns2.nzserver.co.nz. nzserver.co.nz. 3600 IN NS ns1.nzserver.co.nz. ;; ADDITIONAL SECTION: ns1.nzserver.co.nz. 3600 IN A 202.169.196.59 ns2.nzserver.co.nz. 3600 IN A 202.169.196.59 ;; Query time: 0 msec ;; SERVER: 202.169.196.59#53(202.169.196.59) ;; WHEN: Sat Oct 27 15:40:45 2012 ;; MSG SIZE rcvd: 116 Which is good, and is the output I want. But when simply using dig nzserver.co.nz I get... ; <<>> DiG 9.8.1-P1 <<>> nzserver.co.nz ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: SERVFAIL, id: 16970 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;nzserver.co.nz. IN A ;; Query time: 308 msec ;; SERVER: 202.169.192.61#53(202.169.192.61) ;; WHEN: Sat Oct 27 17:09:12 2012 ;; MSG SIZE rcvd: 32 And if I use dig @202.169.196.59 nzserver.co.nz on another linux machine I get... ; <<>> DiG 9.7.3 <<>> @202.169.196.59 nzserver.co.nz ; (1 server found) ;; global options: +cmd ;; connection timed out; no servers could be reached Am I doing something wrong here? Port 53 is definitely open. /etc/bind/named.conf.options options { directory "/var/cache/bind"; forwarders { 202.169.192.61; 202.169.206.10; }; listen-on { 202.169.196.59; }; }; /etc/bind/named.conf.local zone "nzserver.co.nz" { type master; file "/etc/bind/nzserver.co.nz.zone"; }; /etc/bind/nzserver.co.nz.zone ; BIND db file for nzserver.co.nz $ORIGIN nzserver.co.nz. @ IN SOA ns1.nzserver.co.nz. mr.steven.french.gmail.com. ( 2012102606 28800 7200 864000 3600 ) NS ns1.nzserver.co.nz. NS ns2.nzserver.co.nz. MX 10 mail.nzserver.co.nz. @ IN A 202.169.196.59 * IN A 202.169.196.59 ns1 IN A 202.169.196.59 ns2 IN A 202.169.196.59 www IN A 202.169.196.59 mail IN A 202.169.196.59

    Read the article

  • can't install with usb pen drive, SYSLINUX problem

    - by nkint
    i'm on ubuntustudio and i want to format my hd and try kubuntu (install in my acer notebook, no partion, no double operating system problem, only istall it) i've downloaded iso file ( kubuntu-10.10-desktop-i386.iso ), insert usb pen drive, then: system administration startup disk creator erased usb pen content, and "make startup disk" finally, reboot computer with pen inside usb port normal boot didn't start (as expected) but only black screen with this signal: SYSLINUX 4.03 2010-10-22 EDD Copyright (c) 1994-2010, H. Peter Anvin et al unknown keyword in configuration file boot: i've tried different usb pen stick and different iso files (ubuntu, kubuntu, netbook edition).. always same problem (sometimes only the first line without "unknow keyword in conf file" error) some advice?? sorry for my bad english

    Read the article

  • How do I block a user-agent from Apache

    - by rubo77
    How do I realize a UA string block by regular expression in the config files of my Apache webserver? For example: if I would like to block out all bots from Apache on my debian server, that have the regular expression /\b\w+[Bb]ot\b/ or /Spider/ in their user-agent. Those bots should not be able to see any page on my server and they should not appear neither in the accesslogs nor in the errorlogs. http://global-security.blogspot.de/2009/06/how-to-block-robots-before-they-hit.html supposes to uses mod_security for that, but isn't there a simple directive for http.conf?

    Read the article

  • Dlink DWA-556 Access point fails to start on 2.6.35-25 while 2.6.35-24 works. How can I do this with >2.6.35-24?

    - by Azendale
    I'm using hostapd to run an access point with a Dlink DWA-556 wireless N card. However, I can no longer get it to start when I use kernels greater than 2.6.35-24. Here's a log where I ran the uname -a&&hostapd -c <configfile> on the different kernel versions. Linux erikbandersen 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 02:41:37 UTC 2010 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Flushing old station entries Deauthenticate all stations Using interface wlan1 with hwaddr 1c:bd:b9:d5:e8:3c and ssid 'erikbandersen.com/freewifi' wlan1: Setup of interface done. MGMT (TX callback) ACK Malformed netlink message: len=436 left=256 plen=420 256 extra bytes in the end of netlink message MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb mgmt::auth authentication: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=1 status_code=0 wep=0 New STA wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authentication OK (open system) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-AUTHENTICATE.indication(3c:4a:92:0e:41:2f, OPEN_SYSTEM) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) authentication reply: STA=3c:4a:92:0e:41:2f auth_alg=0 auth_transaction=2 resp=0 (IE len=0) MGMT (TX callback) ACK mgmt::auth cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: authenticated mgmt::assoc_req association request: STA=3c:4a:92:0e:41:2f capab_info=0x421 listen_interval=10 Validating WMM IE: OUI 00:50:f2 OUI type 2 OUI sub-type 0 version 1 QoS info 0x0 HT: STA 3c:4a:92:0e:41:2f HT Capabilities Info: 0x102c handle_assoc STA 3c:4a:92:0e:41:2f - no greenfield, num of non-gf stations 1 handle_assoc STA 3c:4a:92:0e:41:2f - 20 MHz HT, num of 20MHz HT STAs 1 hostapd_ht_operation_update current operation mode=0x0 hostapd_ht_operation_update new operation mode=0x7 changes=2 new AID 1 wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: association OK (aid 1) MGMT (TX callback) ACK mgmt::assoc_resp cb wlan1: STA 3c:4a:92:0e:41:2f IEEE 802.11: associated (aid 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-ASSOCIATE.indication(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) wlan1: STA 3c:4a:92:0e:41:2f RADIUS: starting accounting session 4DAC8224-00000000 MGMT (TX callback) ACK mgmt::action cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb MGMT (TX callback) ACK mgmt::proberesp cb Signal 2 received - terminating wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DEAUTHENTICATE.indication(3c:4a:92:0e:41:2f, 1) wlan1: STA 3c:4a:92:0e:41:2f MLME: MLME-DELETEKEYS.request(3c:4a:92:0e:41:2f) Removing station 3c:4a:92:0e:41:2f hostapd_ht_operation_update current operation mode=0x7 hostapd_ht_operation_update new operation mode=0x0 changes=2 Flushing old station entries Deauthenticate all stations . Linux erikbandersen 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux Configuration file: hostapd.conf ctrl_interface_group=0 Opening raw packet socket for ifindex 248 BSS count 1, BSSID mask ff:ff:ff:ff:ff:ff (0 bits) SIOCGIWRANGE: WE(compiled)=22 WE(source)=21 enc_capa=0xf nl80211: Added 802.11b mode based on 802.11g information Allowed channel: mode=1 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=1 chan=11 freq=2462 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=1 freq=2412 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=2 freq=2417 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=3 freq=2422 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=4 freq=2427 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=5 freq=2432 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=6 freq=2437 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=7 freq=2442 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=8 freq=2447 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=9 freq=2452 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=10 freq=2457 MHz max_tx_power=27 dBm Allowed channel: mode=0 chan=11 freq=2462 MHz max_tx_power=27 dBm HT40: control channel: 2 secondary channel: 6 RATE[0] rate=10 flags=0x2 RATE[1] rate=20 flags=0x6 RATE[2] rate=55 flags=0x6 RATE[3] rate=110 flags=0x6 RATE[4] rate=60 flags=0x0 RATE[5] rate=90 flags=0x0 RATE[6] rate=120 flags=0x0 RATE[7] rate=180 flags=0x0 RATE[8] rate=240 flags=0x0 RATE[9] rate=360 flags=0x0 RATE[10] rate=480 flags=0x0 RATE[11] rate=540 flags=0x0 Passive scanning not supported Mode: IEEE 802.11g Channel: 2 Frequency: 2417 MHz Could not set channel for kernel driver wlan1: Unable to setup interface. My wireless card is listed as 02:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01) by lspci. Am I doing it wrong and there's a new way of doing it? I'm holding off upgrading to Natty because of this. What changed between the versions that would cause this? Should I report it as a bug?

    Read the article

  • AWStats configuration issue [on hold]

    - by Dan
    I have a an Ubuntu 12.04.2 LTS server in which i host my website. The website is in Drupal. I tried to set up AWStats for my website but it is giving a lot of problems. I followed this link - http://www.sysadminworld.com/2011/set-up-awstats-on-ubuntu/ But I am confused about the domain name that needs to be given. The website can be accessed from http://xyz.com but the actual link is http://xyz.abc-def.com/root-folder. What is the domain name in this case? So what should be the name of the conf file then?

    Read the article

  • Script to setup Ubuntu as a wireless access point on a bridge mode

    - by nixnotwin
    I use the following script to make my netbook a full-fledged wireless access point. It creates a bridge with eth0 and wlan0 and starts hostapd. #!/bin/bash service network-manager stop ifconfig eth0 0.0.0.0 #remove IP from eth0 ifconfig eth0 up #ensure the interface is up ifconfig wlan0 0.0.0.0 #remove IP from eth1 ifconfig wlan0 up #ensure the interface is up brctl addbr br0 #create br0 node hostapd -d /etc/hostapd/hostapd.conf > /var/log/hostapd.log & sleep 5 brctl addif br0 eth0 #add eth0 to bridge br0 brctl addif br0 wlan0 #add wlan0 to bridge br0 ifconfig br0 192.168.1.15 netmask 255.255.255.0 #ip for bridge ifconfig br0 up #bring up interface route add default gw 192.168.1.1 # gateway This script works efficiently. But if I want to revert back to use Network Manager, I cannot do it. The bridge simply cannot be deleted. How can I modify this script so that if I run bridge_script --stop, the bridge gets deleted, network manager starts and interfaces behave as if the machine had a fresh reboot.

    Read the article

  • Apache Prefork Configuration

    - by user1618606
    I'm newbie on VPS configuration. So, I've installed apache, php and mysql and now I need to know how to configure Prefork to optimize Apache. The system configuration is: CPU Cores 2 x 2 Ghz @ 4 Ghz RAM Memory 2304 MB DDR3 Burst Memory 3 GB DDR3 Disk Space 30 GB SSD Bandwidth 3 TB SwitchPort 1 Gbps Actually, after linux, mysql, apache and php, there are 250 MB memory in use. Well, I don't have idea to calculate. I saw in some websistes, some vars like: KeepAlive On KeepAliveTimeout 1 MaxKeepAliveRequests 100 StartServers 15 MinSpareServers 15 MaxSpareServers 15 MaxClients 20 MaxRequestsPerChild 0 or StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 How I could to do: Prefork or worker? Where and how the vars are placed? In httpd.conf?

    Read the article

  • How do you administer cups remotely using the web interface?

    - by Evan
    I have an Ubuntu server in my apartment and I just got a printer, so it's time to share! In the past I've used CUPS on my Desktop and I'd just point the browsers to localhost:631 to set things up. Can I used the web based admin tools remotely? I've been playing with the /etc/cups/cupsd.conf file and am currently at the point where I can direct a browser on my LAN to server-ip:631 but I'm getting the 403 Forbidden error. If it's not possible or it's a bad idea for security reasons to allow remote administrator of CUPS, would it be possible to accomplish this using an SSH tunnel to the sever?

    Read the article

  • KVM swtitch , screen resolution problem

    - by Vagelism
    I use the lates ubuntu version. Till to day I use it with an acer trravelmate4070 and an LG screen in order to expand my destkop. Works great. Till today that I desided to connect my LG screen to a KVM switch in order to share the big screen with an other pc when I need it. In the KVM switch the resolution is lower and I can not manually change it. I read many solutions about making an .conf file but since I am new to Ubuntu I am afraid , more over I realized that these articles talk for the same problem but not as an expantion screen but as a main screen. Any idea how to config correct this file? I send the links of these articles here: http://robert.penz.name/219/workarou...-kvm-switches/ Where is the X.org config file? How do I configure X there? Thank you!

    Read the article

  • Bluetooth refuses to connect since update to Ubuntu Gnome 13.10

    - by Niklas Berg
    I can no longer connect to my bluetooth speakers since since upgrading to Ubuntu Gnome 13.10 and then Gnome shell to 3.10, which never were a problem with Ubuntu Gnome 13.04. My bluetooth-dongle seems to working fine and I can even detect and add the speakers (Creative D100) but when I try to slide the button from off to on in the bluetooth settings it just slides back to off. The "bluetooth-B" in the upper right corner is also gone. I actually managed to connect after I added "Enable=Socket" under "[general]" /etc/bluetooth/audio.conf and the indicator on the speakers confirms the connection, but I cannot find the speakers in the audio settings even then. I've tried to solve this for several days, reading tons of other possibly related questions here on ask ubuntu and elsewhere but am unable to find a solution. Any ideas?

    Read the article

  • Creating sub domain on webmin [duplicate]

    - by Vijay
    This question is an exact duplicate of: Webmin - Setting up multiple virtual hosts - Subdomains 1 answer Can anybody help me in creating subdoain through webmin. I want to create subdomain like test.xxxxx.com for this I tried with several reference site but no luck. exp. http://www.trickylinux.net/add-domain-virtualminwebmin.html http://codeboxlabs.com/add-subdomain-webmin-linux/ My current httpd.conf look like: <VirtualHost *:80> SSLEngine off DocumentRoot /var/www/html/******/web DirectoryIndex index.php <Directory "/var/www/html/*****/web"> AllowOverride All Allow from All </Directory> ServerName www.******/.com ServerAlias ftp.*****.com SSLEngine off SSLVerifyClient optional </VirtualHost> Please help me to solve this issue.

    Read the article

  • My website directories downloads instead of actually opening up from browser

    - by numerical25
    I added some screencast to show what I am having issues with http://screencast.com/t/212t3ANINqk http://screencast.com/t/bR44U1wkvNZl http://screencast.com/t/iDS7APYYsa but the page downloads my subdirectories instead of opening them up and displaying the index file of that page Here is the situation. I am trying to get my web service up using mac ports and I am just trying to configure all the files. I am using php, apache, etc. the page goes to the localhost root but anything beyond that. it can not find. edit Ive tried to add the following to httpd.conf within the <IfModule mime_module> but no hope AddType application/x-httpd-php .php AddType application/x-httpd-php .phtml AddType application/x-httpd-php .php3 AddType application/x-httpd-php .php4 AddType application/x-httpd-php .html AddType application/x-httpd-php-source .phps

    Read the article

  • Anyone know how to get an LTSP image working with VIA VX855 chipset?

    - by Bryan
    I'm running an LTSP server on Ubuntu 11.10 and can load the i386 image via PXE boot on a VirtualBox VM just fine. However, when I PXE boot a Dell FX130 thin client on the LTSP network the login screen ends up being a white screen with a bunch of wavy black lines going up and down it. The 11.10 splash screen displays just fine as the image is booted, then I get a "INVALID CARD NUMBER" message, then a black screen, then finally the white screen with wavy lines. I'm not sure if the "INVALID CARD NUMBER" message has anything to do with the issue, but in the end the white screen with wavy lines makes me think it's a video driver problem. On the LTSP server, I chrooted into /opt/ltsp/i386 and made sure xserver-xorg-video-openchrome was installed. I did notice that no xorg.conf exits in /etc/X11 though.

    Read the article

  • No rear audio when front jack is connected

    - by Shanoop
    I have Ubuntu 14.04 64bit dual booted. When I connect something on front audio jack then rear audio is not working. I have tried changing analolog-output-headphones.conf file. After changing that alsamixer showing that both centre and surround not muted with full volum. Unfortunately no audio. aplay -l **** List of PLAYBACK Hardware Devices **** card 0: SB [HDA ATI SB], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: SB [HDA ATI SB], device 1: ALC887-VD Digital [ALC887-VD Digital] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2] Subdevices: 1/1 Subdevice #0: subdevice #0

    Read the article

  • how to concatenate two strings in shell script in 3.13.0-34-generic kernel

    - by saikrishna
    I want to concatenate two strings for the shell file im getting error when i have created the shell file in following manner could you please suggest how to get it set export APP_HOME="/home/sfptladmin/ArchivalDaemon" export JAVA_HOME="/usr/lib/jvm/java-7-oracle/jre" export LIBPATH="/home/sfptladmin/ArchivalDaemon/lib" export CPATH=$APP_HOME/conf export CPATH=$CPATH:$LIBPATH/commons-beanutils-core-1.7.0.jar export CPATH=$CPATH:$LIBPATH/commons-collections-3.2.jar export CPATH=$CPATH:$LIBPATH/commons-io-1.4.jar export CPATH=$CPATH:$LIBPATH/commons-lang.jar export CPATH=$CPATH:$LIBPATH/commons-net.jar export CPATH=$CPATH:$LIBPATH/dataloader-27.0.1-uber.jar export CPATH=$CPATH:$LIBPATH/dom4j-1.6.1.jar export CPATH=$CPATH:$LIBPATH/log4j-1.2.15.jar export CPATH=$CPATH:$LIBPATH/opencsv2.3.jar export CPATH=$CPATH:$LIBPATH/poi-3.7.jar export CPATH=$CPATH:$LIBPATH/poi-ooxml-3.7.jar export CPATH=$CPATH:$LIBPATH/poi-ooxml-schemas-3.7.jar export CPATH=$CPATH:$LIBPATH/wsc-23-min.jar export CPATH=$CPATH:$LIBPATH/xmlbeans-2.5.0.jar export CPATH=$CPATH:$LIBPATH/archival-daemon-main.jar export CPATH=$CPATH:$LIBPATH/sbmclasspath.jar export CPATH=$CPATH java -Xms256m -Xmx512m -classpath $CPATH "-Dfile.encoding=UTF-8" com.genpact.proflow.daemon.archival.manager.ArchivalManager echo $CPATH

    Read the article

  • Python script as a service on Ubuntu 11.10

    - by bugs99
    I am facing the following problem. I want to run a python script as a service on Ubuntu 11.10 system (already mentioned in the following link: Python service using Upstart on Ubuntu) I followed the steps mentioned in the above mentioned link, but i got the following error message in syslog: init: script main process (21826) terminated with status 1 Jun 8 16:59:55 bilbo kernel: [263012.984531] init: script main process ended, respawning Jun 8 16:59:55 bilbo kernel: [263013.044099] init: script main process (21827) terminated with status 1 The above two lines are getting repeated all the time. On saying sudo start script, I get the following: $ sudo start script script start/running, process 21826 Following is the content of my script.conf placed in /etc/init: description "Used to start python script as a service" author "bilbo" start on runlevel [2] stop on runlevel [06] exec python /home/bilbo/scripts/webserver.py respawn Please tell me what I am doing wrong? Do I have to change my python code as well?

    Read the article

  • ddclient - wont update Invalid Keyword for 'ip' =

    - by stueng
    /etc/ddclient.conf use=web, web=checkip.dyndns.org/, web-skip='IP Address' protocol=easydns ssl=yes server=members.easydns.com login=stueng password='****' home.***.** /var/log/syslog Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: file /var/cache/ddclient/ddclient.cache, line 3: Invalid Value for keyword 'ip' = '' Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: skipping update of home.***.** from <nothing> to 90.193.*.*. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: last updated <never> but last attempt on Mon Jun 4 13:01:57 2012 failed. Jun 4 13:02:34 XBMCuntu ddclient[10554]: WARNING: Wait at least 5 minutes between update attempts. Help?

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >