Search Results

Search found 4830 results on 194 pages for 'conf'.

Page 92/194 | < Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >

  • Wifi hotspot to connect to Android using non-AP supported cards

    - by 3l4ng
    I'm running Ubuntu 13.10 64b on a Dell Inspiron N5010. My wireless device (found using lspci) is Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01). I bought a new android phone and want to connect to Internet by using the laptop as a Wireless Access Point (ad-hoc doesn't work with Android). I tried following tutorials like the one at How to setup a wi-fi hotspot (access point mode)?. The relevant output from iw list was Supported interface modes: * IBSS * managed Running sudo hostapd /path/to/conf/file gave me (eth1 is the wireless, verified by iwconfig) Failed to create interface mon.eth1: -95 (Operation not supported) Could not set channel for kernel driver eth1: Unable to setup interface. Could not connect to kernel driver. I am able to use Connectify and Virtualrouter on Windows, and the phone works great. How do I get an access point running on Ubuntu? I'm open to other alternatives as well.

    Read the article

  • how do i run teamviewer in a headless system?

    - by Serge
    im really new to ubuntu 12.04 and ive been trying to get remote desktop services between me and my server. and i dont have any spare monitors, keyboards, or mice. i did connect said items too the server and got teamviewer running and connected. but i cant use those components every time i want to go remote desktop. i have ssh but i want a GUI on hand for annoying stressful situations. i read somewhere that ubuntu doesnt start a gui if there is no monitor connected. and tried those xorg.conf setups to no avail. i believe this is the reason why my headlesds setup isnt working. how can i get my GUI to startup while headless?

    Read the article

  • How to start /usr/bin/bitcoind on boot?

    - by André
    I'm trying to get /usr/bin/bitcoind to start on boot but without success. I have this script on /etc/init/bitcoind.conf description "bitcoind" start on filesystem stop on runlevel [!2345] oom never expect daemon respawn respawn limit 10 60 # 10 times in 60 seconds script user=andre home=/home/$user cmd=/usr/bin/bitcoind pidfile=$home/.bitcoin/bitcoind.pid # Don't change anything below here unless you know what you're doing [[ -e $pidfile && ! -d "/proc/$(cat $pidfile)" ]] && rm $pidfile [[ -e $pidfile && "$(cat /proc/$(cat $pidfile)/cmdline)" != $cmd* ]] && rm $pidfile exec start-stop-daemon --start -c $user --chdir $home --pidfile $pidfile --starta $cmd -b -m end script After creating this script I've run the command: sudo initctl reload-configuration When I restart Ubuntu the "bitcoind" does not start. I only can start "bitcoind" running manually the command: sudo start bitcoind Any clues on how to start "bitcoind" on boot?

    Read the article

  • Do I need to install a package (openSWAN or strongSWAN maybe) to use ipsec?

    - by user68886
    I want to connect to a windows share that only accepts ipsec transport mode. I have a list of security policies and a shared secret. I've skimmed through the man page on ipsec.conf on the web and it seems to be the place to put these polices. If ipsec is part of the kernel (and I think it is, I'm using Ubuntu 12.04) do I need to install some other package in order to get this working? I'm guessing it's either openSWAN or strongSWAN but don't know the difference.

    Read the article

  • Graphics on boot split into three sections

    - by a sandwhich
    I just installed 13.04 onto a new laptop because of the ease of install with the uefi bios. When I boot the system though, the screen is split into three sections each about 640x200 at the top of the screen, with the active terminal mirrored across them. Although I can login, startx fails due to something about a file. I have tried booting with vga=711 and normal nomodeset with no success. Booting the live usb I originally installed from results in the same issue. The graphics driver in the xorg.conf.something from what I can make out is set to vesa, but it could be set to some other four character value that is similar to vesa, hard to tell. How can I fix this? One thing to note, the laptop has two dedicated GT 750m's, along with the intel 4000 built into the processor. This is what it looks like, the purple box is what the grub2 menu was in before boot.

    Read the article

  • Setup site folders on Apache and PHP [closed]

    - by Cobus Kruger
    I'm trying to set up my first Apache server on my Windows PC at home and I have real trouble finding out which configuration settings go where. I downloaded and installed XAMPP which seemed to get everything nicely set up and can see a working website on http://localhost. So far so good. The point of this is to develop a website of course, and to make my life easier (irony?), I wanted to let the web site root point to my Eclipse project folder. So I opened httpd.conf, uncommented a VirtualHost block and changed its DocumentRoot to my local path. Now when I try to load http://localhost I get a 403 (Access denied) error. So where do I configure permissions for my folder? And is that all I need to let my site run from the folder specified or am I going to have to clear another hurdle?

    Read the article

  • Not Working Nvidia GT 635M drivers

    - by Andres
    I'm having problems trying to use my Nvidia 635M in my asus N46VJ laptop. I open the "Nvidia X server settings" I get this message : "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run nvidia-xconfig as root), and restart the X server." I open the terminal typi "sudo nvidia-xconf" and this creates a file, /etc/X11/xorg.conf After reboot I'm in a lower resolution of 640x480, without other options to change it, then open the Details system and it shows me this in the Graphic item: Intel® Ivybridge Mobile I type this in the terminal (no idea what that means, I just saw it in a forum!!!) lspci -vnn | grep '\''[030[02]]' and get this: 00:02.0 VGA compatible controller [0300]: Intel Corporation 3rd Gen Core processor Graphics Controller [8086:0166] (rev 09) (prog-if 00 [VGA controller]) 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GF108M [GeForce GT 635M] [10de:0de3] (rev a1) (prog-if 00 [VGA controller]) I installed bumblebee but nothings happens additionally the additional drivers shows me "no propietary Drivers are in use on this system"

    Read the article

  • Juju didn't configure rabbitmq for openstack?

    - by SaM
    I have installed ubuntu Openstack HA with juju with all 24 servers. But my openstack is not working at all. On dashboard on every page I get errors saying "could not retrieve usage information", "could not retrieve volume information, "could not retrieve .....etc I spent hours and have discovered that juju has not done configuration correctly. I found that on cloud controller in nova.conf juju has added rabitmq vhost enrty, but that virtual host is not added in rabbitmq. Then how is its suppose to work? And on juju-gui canvas rabbimq is all green and is working fine, which in reality its not. I am really wondering if juju has really done correct configuration in all 24 servers now, I am getting the feeling that it would have been faster if I would have done openstack deployment manually instead of using juju. Why was the virtual host entry not added in rabbitmq? How should I solve this?

    Read the article

  • Apache wont work after changing port

    - by user73595
    I am working with ubuntu 12.04 server 64-bit edition. I have intalled apache2 without any problems and i can see the "It works" message. And i can also access from other pc within the network. I want to host my website using home DSL, However i found out that my ISP is blocking the port 80, 25 ,110 so i changed the port to 8010 (/etc/apache2/port.conf) After this I am unable to get the "It Works" web page. All it shows that "NOT FOUND" i tried with ipaddress:8010 and it doesnot work with both internal and also external.

    Read the article

  • Problems with NVIDIA drivers: White screen with full(or almost full)screen apps

    - by Felipe
    My NVIDIA graphic card is a 7050/610i. My problem is that after upgrading to the last NVIDIA drivers when I use fullscreen apps (or almost fullscreen) the windows goes white. My xorg.conf file: # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 270.29 ([email protected]) Wed Feb 23 16:38:34 PST 2011 Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" Option "AddARGBGLXVisuals" "True" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Module" Load "glx" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" # generated from default EndSection Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Device" Identifier "Device0" VendorName "NVIDIA Corporation" Driver "nvidia" Option "NoLogo" "True" EndSection Any idea on how to solve this? <--Sorry for bad english, ask for more info--

    Read the article

  • Running a .bash file in Eclipse

    - by Anne Ambe
    I know this is really an Eclipse issue but I can't seem to login in their forum. I am running eclipse juno for some c/c++ development.However, I wrote a .bash script that initiate the entire program.As input argument to this script, I have a a configuration file which is one directory lower than the .bash file. In terminal I just do: ./startenb.bash ./CONF/ANNE it runs just fine. How can I configure the external tools in eclipse to take this file path as input argument? Any help or old thread vaguely addressing this issue is highly welcome.

    Read the article

  • Script to setup ubuntu as a wireless accesspoint on a bridge mode

    - by nixnotwin
    I use the following script to make my netbook a full-fledged wireless accesspoint. It creates a bridge with eth0 and wlan0 and starts hostapd. #!/bin/bash service network-manager stop ifconfig eth0 0.0.0.0 #remove IP from eth0 ifconfig eth0 up #ensure the interface is up ifconfig wlan0 0.0.0.0 #remove IP from eth1 ifconfig wlan0 up #ensure the interface is up brctl addbr br0 #create br0 node hostapd -d /etc/hostapd/hostapd.conf > /var/log/hostapd.log & sleep 5 brctl addif br0 eth0 #add eth0 to bridge br0 brctl addif br0 wlan0 #add wlan0 to bridge br0 ifconfig br0 192.168.1.15 netmask 255.255.255.0 #ip for bridge ifconfig br0 up #bring up interface route add default gw 192.168.1.1 # gateway This script works efficiently. But if I want to revert back to use Network Manager, I cannot do it. The bridge simply cannot be deleted. How can I modify this script so that if I run bridge_script --stop, the bridge gets deleted, network manager starts and interfaces behave as if the machine had a fresh reboot.

    Read the article

  • tomcat behind apache

    - by dannynjust
    i am trying to use the mod_proxy_ajp to forward all the request from tocat.example.com to example.com:8080 here is what the tomcat server.xml looks like: <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> and here is the apache.conf config: <VirtualHost *:80> ServerName tomcat.example.com ServerAdmin [email protected] ErrorLog logs/tomcat.example.com-error_log CustomLog logs/tomcat.example.com-access_log common <Proxy *> AddDefaultCharset Off Order deny,allow Allow from all </Proxy> ProxyPass / ajp://example:8009/ ProxyPassReverse / ajp://example:8009/ </VirtualHost> but it is not working, any idea?

    Read the article

  • Sound driver for motherboard gigabyte ga-g1975x-c (Creative Sound Blaster Live 24-bit) (alsa, ca0106)

    - by Mikl
    My motherboard is gigabyte ga-g1975x-c with integrated audio "Creative Sound Blaster Live 24-bit". I have installed Ubuntu 10.10, and there was no sound at all. Alsa drivers was already installed. Finally after long searching, i have found how to make my sound work. /etc/modprobe.d/alsa-base.conf: options snd-ca0106 subsystem=0x10121102 //i have added this line and restart After restarting my speakers and microfon works fine. Maybe somebody knows different/better subsystem code for my sound card???

    Read the article

  • How to configure Ubuntu with Standard TV?

    - by Ryan Wyan
    Ubuntu 8 version nVidia card with driver 96.43.10-0ubuntu1 /etc/X11/xorg.conf Section "Screen" Identifier "Television Screen" Device "Television Device" Monitor "Television" DefaultDepth 24 Option "TVOutFormat" "COMPONENT" Option "TVStandard" "PAL-B" SubSection "Display" Depth 24 Modes "640x480@40" EndSubSection EndSection Section "Module" Load "glx" Disable "dri2" EndSection Section "Device" Identifier "Default Device" Driver "nvidia" EndSection Television is Sharp FlatX Standard TV, its specifications can be found at http://www.amazon.com/Sharp-X-Flat-32F630-Flat-Screen-32/dp/B0000AKVAV There were other screen sections which I removed. The TV shows just distorted image with just particles of different colors. I tried different resolution but did not figure out. Kindly help me how to setup TV with Ubuntu. I am newbie to this and not aware of subtle technicalities. Thanks indeed.

    Read the article

  • How do I reset proxy in terminal to automatic if not connected via proxy

    - by therealnube
    Well,all I ever wanted was to download and install an application from the terminal. And to my surprise I just can't I tried to reset proxy of the terminal by some commands but it doesn't happen and automatically switches back to this proxy 172.16.0.16 (which apparently was my college proxy). I checked in my system settings too.. I don't understand why this is recurring. Please be comprehensive,I am a nube :) Also I further would like to know how to bypass proxy server since I couldn't access any of the repositories as they were blocked in my college's proxy settings as is Ubuntu's homepage. Thanks for your time. For sudo ls /etc/apt/apt.conf.d/ it displays a different set of options where proxy is not listed.I am on 12.10,if this should help any.I put a snap of the terminal after the above command has been entered.

    Read the article

  • 301 url rewrite loop

    - by anyvendetta
    I need to do a 301 rewrite to force all urls to become lowercase i put in htaccess (RewriteMap lc int:tolower in httpd.conf) RewriteCond %{REQUEST_URI} [A-Z] RewriteRule . ${lc:{REQUEST_URI}} [R=301,L] Everything works just fine except to urls with subcategories which in this case are: /category-1256-Product-page-example.html the numer 1256 refers to a "subcategory" So when i try to access /category-1256-Product-page-example.html gives me a loop error message I think another redirect rules are making the loop but dunno how to fix it because are just this urls rewrite rules that don't work with the above rewrite. Rewriterule ^main-site-url/category-([0-9]*)-([-_a-zA-Z0-9]*)\.html$ /subcategories.php?idcategory_main=1&idcategory=$1&category=$2 [L] Rewriterule ^main-site-url/([0-9]*)-([-_a-zA-Z0-9]*)-([0-9]*)\.html$ /file.php?idcategory_main=1&idsubcategory=$1&product=$2&idproduct=$3 [L]

    Read the article

  • Ubuntu stuck in low resolution after UNinstalling / disabling NVidia drivers

    - by Han Cnx
    Tried the Nvidia driver, installed using the Additional Drivers panel. Didn't like it much; the CPU seemed to overheat more and the brightness controls stopped working. Also selecting a second display is a pain using that horrible NVidia settings thing. So wanted to disabled it again.. problem is, UBuntu is then stuck in either 640x480 or 800x600 (second time I tried to install it back and then remove again). How can I get this back the way it was? The original Ubuntu drivers worked just fine, allowing me to run Unity and games properly. I tried a xserver-xorg reconfigure but this didn't do anything. (No xorg.conf file either). This is on a Lenovo Thinkpad T410i

    Read the article

  • Mouse pointer size problem

    - by Rasmus Pedersen
    My mouse cursor is double the normal size. Its only the default pointer that is enlarged. Variations like resize, busy and so on are the correct size. The problem persists even when I change cursor theme. If I move the cursor inside a Firefox window it changes to the correct size. My resolution is 2560x1440, its a single screen setup. Nvidia-settings reports my DPI to be: 108x107. I've tired to force that DPI in the LightDM conf, since I figured it must have something to-do with the DPI calculation. I have tried to change the cursor size through dconf but the problem still remains. I haven't seen this problem before, it arrived after the upgrade from Beta 2 to release version of Ubuntu 11.10. Anybody got any idea what the problem might be, its pretty annoying with the huge cursor.

    Read the article

  • fglrx installation without success

    - by Lucio
    I followed the steps of this guide and it doesn't work. I've entered the following command and I had an output with dependencies error. sudo dpkg -i fglrx*.deb So I tried with gdebi instead, and it works. Now fglrx & fglrx-amdcccle & fglrx-dev are installed. The next step is Generate a new /etc/X11/xorg.conf file, but I can't do this due to the following reason: When I enter sudo aticonfig --initial -f the terminal show me this output: sudo: aticonfig: command not found I've installed the packages correctly or not? What I have to do to fix the problem? NOTE: I've not uninstalled nothing (drivers, config., etc.) before beginning the installation.

    Read the article

  • Cannot connect to secure wireless with Netgear wna3100 USB

    - by Vince Radice
    I have installed Ubuntu 11.10. I used a wired connection to download and install all of the updates. When I tried to use a Netgear WNA3100 wireless USB network adapter, it failed. Much searching and trying things I was finally able to get it working by disabling security on my router. I have verified this by disabling security and I was able to connect. When I enabled security (WPA2 PSK), the connection failed. What is necessary to enable security (WPA2 PSK) and still use the Netgear USB interface? Here is the output from the commands most requested lsusb Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 003: ID 0846:9020 NetGear, Inc. WNA3100(v1) Wireless-N 300 [Broadcom BCM43231] lshw -C network *-network description: Ethernet interface product: RTL-8139/8139C/8139C+ vendor: Realtek Semiconductor Co., Ltd. physical id: 3 bus info: pci@0000:02:03.0 logical name: eth0 version: 10 serial: 00:40:ca:44:e6:3e size: 10Mbit/s capacity: 100Mbit/s width: 32 bits clock: 33MHz capabilities: pm bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=8139too driverversion=0.9.28 duplex=half latency=32 link=no maxlatency=64 mingnt=32 multicast=yes port=MII speed=10Mbit/s resources: irq:19 ioport:c800(size=256) memory:ee011000-ee0110ff memory:40000000-4000ffff *-network description: Wireless interface physical id: 1 logical name: wlan0 serial: e0:91:f5:56:e1:0d capabilities: ethernet physical wireless configuration: broadcast=yes driver=ndiswrapper+bcmn43xx32 driverversion=1.56+,08/26/2009, 5.10.79.30 ip=192.168.1.104 link=yes multicast=yes wireless=IEEE 802.11g iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11g ESSID:"vincecarolradice" Mode:Managed Frequency:2.422 GHz Access Point: A0:21:B7:9F:E5:EE Bit Rate=121.5 Mb/s Tx-Power:32 dBm RTS thr:2347 B Fragment thr:2346 B Encryption key:off Power Management:off Link Quality:76/100 Signal level:-47 dBm Noise level:-96 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 ndiswrapper -l bcmn43xx32 : driver installed device (0846:9020) present lsmod | grep ndis ndiswrapper 193669 0 dmesg | grep -e ndis -e wlan [ 907.466392] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 907.838507] ndiswrapper (import:233): unknown symbol: ntoskrnl.exe:'IoUnregisterPlugPlayNotification' [ 907.838955] ndiswrapper: driver bcmwlhigh5 (Netgear,11/05/2009, 5.60.180.11) loaded [ 908.137940] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmwlhigh5, version: 0x53cb40b, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 908.141879] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 908.143048] usbcore: registered new interface driver ndiswrapper [ 908.178826] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 994.015088] usbcore: deregistering interface driver ndiswrapper [ 994.028892] ndiswrapper: device wlan0 removed [ 994.080558] ndiswrapper version 1.56 loaded (smp=yes, preempt=no) [ 994.374929] ndiswrapper: driver bcmn43xx32 (,08/26/2009, 5.10.79.30) loaded [ 994.404366] ndiswrapper (mp_init:219): couldn't initialize device: C0000001 [ 994.404384] ndiswrapper (pnp_start_device:435): Windows driver couldn't initialize the device (C0000001) [ 994.404666] ndiswrapper (mp_halt:262): device e05b6480 is not initialized - not halting [ 994.404671] ndiswrapper: device eth%d removed [ 994.404709] ndiswrapper: probe of 1-5:1.0 failed with error -22 [ 994.406318] usbcore: registered new interface driver ndiswrapper [ 2302.058692] wlan0: ethernet device e0:91:f5:56:e1:0d using NDIS driver: bcmn43xx32, version: 0x50a4f1e, NDIS version: 0x501, vendor: 'NDIS Network Adapter', 0846:9020.F.conf [ 2302.060882] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2, WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK [ 2302.113838] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2354.611318] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2355.268902] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2365.400023] wlan0: no IPv6 routers present [ 2779.226096] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2779.422343] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 2797.574474] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2802.607937] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 2803.261315] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 2813.952028] wlan0: no IPv6 routers present [ 3135.738431] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3139.180963] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3139.816561] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.229872] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.444542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.758297] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3163.860684] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.118732] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.139553] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3205.300542] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3353.341402] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3363.266399] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.505475] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.506619] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3363.717203] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3363.779206] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.206152] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.248624] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3405.577664] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3438.852457] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3438.908573] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.282995] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.325237] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.460716] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.461763] ndiswrapper (set_iw_auth_mode:601): setting auth mode to 5 failed (00010003) [ 3568.809776] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3568.880641] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.122848] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.148328] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3610.324502] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 3636.088798] ndiswrapper (iw_set_auth:1602): invalid cmd 12 [ 3636.712186] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 3647.600040] wlan0: no IPv6 routers present I am using the system now with the router security turned off. When I submit this, I will turn security back on.

    Read the article

  • Adding a ppa repo and get key signed - no valid OpenPGP data - proxy issue?

    - by groovehunter
    I want to get a ppa key signed I tried apt-key adv --keyserver keyserver.ubuntu.com --recv-keys A258828C Executing: gpg --ignore-time-conflict --no-options --no-default-keyring --secret-keyring /etc/apt/secring.gpg --trustdb-name /etc/apt/trustdb.gpg --keyring /etc/apt/trusted.gpg --primary-keyring /etc/apt/trusted.gpg --keyserver keyserver.ubuntu.com --recv-keys A258828C gpg: requesting key A258828C from hkp server keyserver.ubuntu.com gpgkeys: HTTP fetch error 7: couldn't connect to host gpg: no valid OpenPGP data found. gpg: Total number processed: 0 and wget -q http://ppa.launchpad.net/panda3d/ppa/ubuntu/dists/lucid/Release.gpg -O- | apt-key add - gpg: no valid OpenPGP data found I am behind a proxy , in apt.conf it is configured correctly Acquire::http::Proxy "http://proxy.mycompany.de:3128"; I also tried setting proxy export http_proxy="proxy.mycompany.de:3128" export https_proxy="proxy.mycompany.de:3128"

    Read the article

  • kill SIGABRT does not generate core file from daemon started from crontab. [closed]

    - by Guma
    I am running CentOS 5.5 and working on server application that sometimes I need to force core dump so I can see what is going on. If I start my server from shell and send kill SIGABRT, core file is created. If I start same program from crontab and than I send same signal to it server is "killed" but not core file is generated. Does any one know why is that and what need to be added to my code or changed in system settings to allow core file generation? Just a side note I have ulimit set to unlimited in /etc/profile I have set kernel.core_uses_pid = 1 kernel.core_pattern=/var/cores/%h-%e-%p.core in /etc/sysctl.conf Also my server app was added to crontab under same login id as I am running it from shell. Any help greatly appreciated

    Read the article

  • error with slap.d while installing any new software

    - by ali haider
    I am trying to install wireshark (this issue is not specific to wireshark) on my ubuntu box and I keep getting the following error for slap.d: Setting up slapd (2.4.23-6ubuntu6.1) ... Creating initial configuration... mkdir: cannot create directory `/etc/ldap/slapd.d': File exists dpkg: error processing slapd (--configure): subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: slapd Besides uninstalling or trying to update open LDAP or slap.d, is there any other action that can be taken to resolve this issue? I am trying the install as root user & I have tried moving the slap.d conf file so far but without any luck. Any thoughts on troubleshooting/resolving this issue will be quite welcome. thank in advance

    Read the article

  • No bass from the speakers

    - by Bhavesh Jogadia
    In Ubuntu 11.10 no bass sound at all when try to play mp3 or 2channels audio. I have 5.1/6 channels speakers. When I test speakers from the sound preference it works perfectly fine and then I try to play any MP3 there is no bass only the speakers work, I play 5.1 movies it plays fine bass sounds good. Also tried to to some changes as instructed with deamon.conf file but no go... When I turn my speakers on play speakers only mode it plays the bass but sound quality is not good compared to normal playing. I have a Creative 5.1 vx ca0160 sound card. In Windows also had the same problem unless I do bass redirection crossover frequency so is there any kinda software package or any kinda changes i can make in system file so that my speaker bass works fine or any thing who can let me change the bass redirection crossover frequency?

    Read the article

< Previous Page | 88 89 90 91 92 93 94 95 96 97 98 99  | Next Page >