Search Results

Search found 5658 results on 227 pages for 'eric fail'.

Page 91/227 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • unit testing variable state explicit tests in dynamically typed languages

    - by kris welsh
    I have heard that a desirable quality of unit tests is that they test for each scenario independently. I realised whilst writing tests today that when you compare a variable with another value in a statement like: assertEquals("foo", otherObject.stringFoo); You are really testing three things: The variable you are testing exists and is within scope. The variable you are testing is the expected type. The variable you are testing's value is what you expect it to be. Which to me raises the question of whether you should test for each of these implicitly so that a test fail would occur on the specific line that tests for that problem: assertTrue(stringFoo); assertTrue(stringFoo.typeOf() == "String"); assertEquals("foo", otherObject.stringFoo); For example if the variable was an integer instead of a string the test case failure would be on line 2 which would give you more feedback on what went wrong. Should you test for this kind of thing explicitly or am i overthinking this?

    Read the article

  • Ubuntu 11.10 with KDE installed does not prompt for elevation for privileged ops in all apps

    - by Michael Goldshteyn
    I installed the KDE window manager on top of Ubuntu 11.10 and while I am using KDE, I do not get an elevation dialog when I try to perform tasks that require root privileges. Instead, the operations silently fail, unless I launch apps from a terminal, in which case I get errors like: Traceback (most recent call last): File "/usr/lib/python2.7/dist-packages/softwareproperties/gtk/SoftwarePropertiesGtk.py", line 649, in on_isv_source_toggled self.backend.ToggleSourceUse(str(source_entry)) File "/usr/lib/python2.7/dist-packages/dbus/proxies.py", line 143, in __call__ **keywords) File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 630, in call_blocking message, timeout) dbus.exceptions.DBusException: com.ubuntu.SoftwareProperties.PermissionDeniedByPolicy: com.ubuntu.softwareproperties.applychanges Or from the muon package manager, an error dialog such as: Does anyone know what I need to do to fix this, so that I get a proper dialog asking for elevation? Otherwise, I have to start each app that may need root privs with sudo from a terminal or gksudo. Thanks

    Read the article

  • Accidentally uninstalled Ubuntu 14.04 system settings. How to get them back?

    - by Dan
    Somehow, cleaning up useless software (using software center), I uninstalled Ubuntu "system settings". I did this by mistake. Now I fail to find system settings application using software center (and there are so many items in history...). It seems strange to me because usually when I try to uninstall something critical (system testing for example), the dependencies manager tells me It will uninstall the whole desktop system then. I am sure I did not have that warning. So I need the name of the software to install or a command line command rather than a system restore to get it back. Very interesting thing. If you ever want to play with this and reproduce it, you will be confused to see Ubuntu Mobile system settings instead! Yes, mobile network and touchscreen settings! Happy pre-release viewing!

    Read the article

  • What is the recommended toolchain for formatting XML DocBook?

    - by Jonathan Leffler
    I've seen Best tools for working with DocBook XML documents, but my question is slightly different. Which is the currently recommended formatting toolchain - as opposed to editing tool - for XML DocBook? In Eric Raymond's 'The Art of Unix Programming' from 2003 (an excellent book!), the suggestion is XML-FO (XML Formatting Objects), but I've since seen suggestions here that indicated that XML-FO is no longer under development (though I can no longer find that question on StackOverflow, so maybe it was erroneous). Assume I'm primarily interested in Unix/Linux (including MacOS X), but I wouldn't automatically ignore Windows-only solutions. Is Apache's FOP the best way to go? Are there any alternatives?

    Read the article

  • Are there any non-english programming languages? [closed]

    - by samarudge
    Possible Duplicate: Non-English-based programming languages Not sure if this is the right place to ask this, but I'm going to anyway. Without fail, every programming language I've ever seen, used or heard of has it's keywords based around English. if, else, while, for, query, foreach, image, path, extension, the list goes on, are all based around English words. Are there any languages, or ports of languages that base their core keywords based on non-english words to lower the wall for non-english speaking programmers? This is mostly for intrest (English is my first language so it's no problem for me). Are these languages popular locally (I.E. might a software development house in Germany use a programming language based in German over one based in English).

    Read the article

  • How Do I interpret HDD S.M.A.R.T Results?

    - by Marty
    My laptop has recently started to become a bit unreliable, and for some reason I started to suspect that my HDD was starting to fail. After a bit of hunting on the internet, I found Ubuntu's Disk Utility in the System menu and ran the long SMART diagnostics from this. However, since the documentation for Disk Utility is very poor (palimpsest?), I'm not sure how to interpret the results: For example, the Read Error Rate is over 50 million (!), yet the Assessment is rated "Good". So would someone mind explaining to me how to interpret the results of these tests (especially the Normalized, Worst, Threshold and Value numbers)? And maybe tell me what they think of the results I got for my HDD? (Thanks)

    Read the article

  • Install packages with unmet dependencies

    - by Alvin Sim
    Hi all, I am trying to install some applications but some of them fail to install. The three applications I tried are Vim, Emacs and GNOME-Do. I am using Ubuntu 10.10 installed as a guest OS in VirtualBox. The kernel version installed is 2.6.35-26. The error I got is : alvinsim@ubuntu:/etc/apt$ sudo apt-get install emacs Reading package lists... Done Building dependency tree Reading state information... Done Some packages could not be installed. This may mean that you have requested an impossible situation or if you are using the unstable distribution that some required packages have not yet been created or been moved out of Incoming. The following information may help to resolve the situation: The following packages have unmet dependencies: emacs : Depends: emacs23 or emacs23-lucid but it is not going to be installed emacs23-nox but it is not going to be installed E: Broken packages What is wrong and how do I fix this? Thanks.

    Read the article

  • Bastion unexpectedly exits when I move my cursor

    - by user69358
    I downloaded the Humble Indie Bundle V, mostly because my friend told me about how great Bastion was. When I first installed it, I was getting the seemingly common "black screen" error that most people got (fixed that half with this http://ubuntuforums.org/showthread.php?p=11992661). But I also have an error where every time I move my cursor, in any direction, any amount, the game closes instantly. I can use the keyboard no problem, but without fail, every time I move my mouse, it crashes. Does anyone know what might be causing this? Has anyone encountered anything like this before? I am worried it may be a hardware issue, but hoping someone might be able to help me out. I'm running Ubuntu 12.04 on a Dell Studio 1558. Graphics card is the stock Intel graphics card, running on 4 GB of RAM.

    Read the article

  • Editing a 9gb .sql file

    - by CERIQ
    Hi. I've got a "slightly" large sql script saved as a textfile. It totals in at 8.92gb, so it's a bit of a beast. I've got to do some search and replaces in this file(specifically, change all NOT NULL to NULL, so all fields are nullable) and then execute the darned thing. Does anyone have any suggestions for a text editor that would be capable of this? The other way that I can see to solve the problem is to write a program that reads a chunk, does a replace on the stuff I need, and then save it to a new file, but I'd rather use some standard way of doing this. It also does not solve the problem of opening the beast up in sql server management studio to execute the darned thing... Any ideas? Thanks, Eric

    Read the article

  • Apache Server SSL Problems

    - by Kid XD
    Hi There is this weird problem going on with putting ssl on the server I keep on getting this error in the terminal after I already created the .key and .crt files but it keeps on saying I placed the files in the conf.d directory and I already configured the thing so there is something that I did wrong there I also used openssl to create a .key and the .crt files thanks for the help if anyone can service apache2 reload Syntax error on line 1 of /etc/apache2/conf.d/www.domainname.crt Invalid command '-----BEGIN', perhaps misspelled or defined by a module not included in the server configuration Action 'conftest' failed. The Apache error log may have more information. ...fail!

    Read the article

  • MCM Lab exam this week

    - by Rob Farley
    In two days I’ll’ve finished the MCM Lab exam, 88-971. If you do an internet search for 88-971, it’ll tell you the answer is –883. Obviously. It’ll also give you a link to the actual exam page, which is useful too, once you’ve finished being distracted by the calculator instead of going to the thing you’re actually looking for. (Do people actually search the internet for the results of mathematical questions? Really?) The list of Skills Measured for this exam is quite short, but can essentially be broken down into one word “Anything”. The Preparation Materials section is even better. Classroom Training – none available. Microsoft E-Learning – none available. Microsoft Press Books – none available. Practice Tests – none available. But there are links to Readiness Videos and a page which has no resources listed, but tells you a list of people who have already qualified. Three in Australia who have MCM SQL Server 2008 so far. The list doesn’t include some of the latest batch, such as Jason Strate or Tom LaRock. I’ve used SQL Server for almost 15 years. During that time I’ve been awarded SQL Server MVP seven times, but the MVP award doesn’t actually mean all that much when considering this particular certification. I know lots of MVPs who have tried this particular exam and failed – including Jason and Tom. Right now, I have no idea whether I’ll pass or not. People tell me I’ll pass no problem, but I honestly have no idea. There’s something about that “Anything” aspect that worries me. I keep looking at the list of things in the Readiness Videos, and think to myself “I’m comfortable with Resource Governor (or whatever) – that should be fine.” Except that then I feel like I maybe don’t know all the different things that can go wrong with Resource Governor (or whatever), and I wonder what kind of situations I’ll be faced with. And then I find myself looking through the stuff that’s explained in the videos, and wondering what kinds of things I should know that I don’t, and then I get amazingly bored and frustrated (after all, I tell people that these exams aren’t supposed to be studied for – you’ve been studying for the last 15 years, right?), and I figure “What’s the worst that can happen? A fail?” I’m told that the exam provides a list of scenarios (maybe 14 of them?) and you have 5.5 hours to complete them. When I say “complete”, I mean complete – you don’t get to leave them unfinished, that’ll get you ‘nil points’ for that scenario. Apparently no-one gets to complete all of them. Now, I’m a consultant. I get called on to fix the problems that people have on their SQL boxes. Sometimes this involves fixing corruption. Sometimes it’s figuring out some performance problem. Sometimes it’s as straight forward as getting past a full transaction log; sometimes it’s as tricky as recovering a database that has lost its metadata, without backups. Most situations aren’t a problem, but I also have the confidence of being able to do internet searches to verify my maths (in case I forget it’s –883). In the exam, I’ll have maybe twenty minutes per scenario (but if I need longer, I’ll have to take longer – no point in stopping half way if it takes more than twenty minutes, unless I don’t see an end coming up), so I’ll have time constraints too. And of course, I won’t have any of my usual tools. I can’t take scripts in, I can’t take staff members. Hopefully I can use the coffee machine that will be in the room. I figure it’s going to feel like one of those days when I’ve gone into a client site, and found that the problems are way worse than I expected, and that the site is down, with people standing over me needing me to get things right first time... ...so it should be fine, I’ve done that before. :) If I do fail, it won’t make me any less of a consultant. It won’t make me any less able to help all of my clients (including you if you get in touch – hehe), it’ll just mean that the particular problem might’ve taken me more than the twenty minutes that the exam gave me. @rob_farley PS: Apparently the done thing is to NOT advertise that you’re sitting the exam at a particular time, only that you’re expecting to take it at some point in the future. I think it’s akin to the idea of not telling people you’re pregnant for the first few months – it’s just in case the worst happens. Personally, I’m happy to tell you all that I’m going to take this exam the day after tomorrow (which is the 19th in the US, the 20th here). If I end up failing, you can all commiserate and tell me that I’m not actually as unqualified as I feel.

    Read the article

  • ArchBeat Link-o-Rama for 2012-03-30

    - by Bob Rhubart
    The One Skill All Leaders Should Work On | Scott Edinger blogs.hbr.org Assertiveness, according to HBR blogger Scott Edinger, has the "power to magnify so many other leadership strengths." When Your Influence Is Ineffective | Chris Musselwhite and Tammie Plouffe blogs.hbr.org "Influence becomes ineffective when individuals become so focused on the desired outcome that they fail to fully consider the situation," say Chris Musselwhite and Tammie Plouffe. BPM in Retail Industry | Sanjeev Sharma blogs.oracle.com Sanjeev Sharma shares links to a pair of blog posts that address common BPM use-cases in the Retail industry. Oracle VM: What if you have just 1 HDD system | Yury Velikanov www.pythian.com "To start playing with Oracle VM v3 you need to configure some storage to be used for new VM hosts," says Yury Velikanov. He shows you how in this post. Thought for the Day "Elegance is not a dispensable luxury but a factor that decides between success and failure." — Edsger Dijkstra

    Read the article

  • RDA Health Checks for SOA

    - by ShawnBailey
    What is a health check in RDA? A health check evaluates something in your environment to determine whether a change needs to be considered in order to avoid a problem or optimize fuctionality. Examples of what this 'something' might be are: Configuration Parameters JVM Options Runtime Statistics What have we done for SOA? In the latest release of RDA, 4.30, we have added a Rule Set for SOA called 'Oracle SOA 11g (11.1.1) Post Installation (Generic)'. This Rule Set contains 14 SOA related health checks. These checks were all derived from common issues / solutions we see in support of the SOA product. Many of the recommendations come from the product documentation while others are covered in the SOA Knowledge Base. Our goal is that you will be able to easily identify the areas of concern and understand the guidance available from the output of the Rule Set. Running the health checks for SOA The rules that the checks use are installed with RDA and bundled by product or functional area into what are called 'Rule Sets'. To view the available Rule Sets simply run the command from the RDA home location: rda.cmd (or .sh) -dT hcve This will bring up a list of the available HCVE (Health Check / Verification Engine) Rule Sets. Each Rule Set contains a group of related rules that are used for evalutation and display of results. A rule can be considered synonymous with a single health check and they are assigned an ID, Name and Description that can be seen when they are executed. The Rule Set for SOA is option number 11 and you just enter this selection at the prompt. The Rule Set will then execute to completion. After running an HCVE Rule Set the tool will write the output to the RDA_HOME/output folder. The simplest way to view the output is to drag the .htm file to a browser but of course it can also be uploaded to a Service Request for evaluation by Oracle Support. Many of the Rule Sets will prompt you for information before they can execute their rules but the SOA Rule Set will identify the SOA domains configured in your RDA setup.cfg file. This means that you don't need to answer all of the questions again about where stuff is but it also means that you must have configured RDA for SOA. To run the Rule Set: Download the latest version of RDA from MOS Doc ID 314422.1 Configure RDA for your SOA domains. Detailed steps can be found here In it's simplest form the command is 'rda.cmd (.sh) -S SOA' Go to the RDA home location and enter the command 'rda.cmd (or .sh) -dT hcve' Select option '11' It should be noted that this our first release of a SOA Rule Set so there will probably be some things we need to clean up or fix. None of these rules will actually modify anything on your system as they are read only and do the evaluations internally. Please let us know if you have any issues with the rules or ideas for new ones so we can make them as useful as possible. The Checks Here is a list of the SOA health checks by ID, Name and Description. ID Name Description A00100 SOA Domain Homes Lists the SOA domains that were indentified from the RDA setup.cfg file A00200 Coherence Protocol Conflict Checks to see if you have both Unicast and Multicast configured in the same domain. Checks both the setDomainEnv and config.xml entries (if it exists). We recommend Unicast with fully qualified host names or IP addresses. A00210 Coherence Fully Qualified Host Checks that the host names are fully qualified or that IP addresses are used. Will fail if unqualified host names are detected. A00220 Unicast Local Host Checks that the Coherence localhost is specified for use with Unicast A00300 JTA Timeout Checks that the JTA timeout is configured for the domain and lists the value. The bundled rule will only list the current values of the JTA timeout for each SOA Domain. In the future the rule with fail with a warning if the value is 300 seconds or lower. It is recommended that timeouts follow the pattern 'syncMaxWaitTime' < EJB Timeouts < JTA Timeout. The 300 second value is important because the EJB Timeouts default to 300 seconds. Additional information can be found in MOS Doc ID 880313.1. A00310 XA Max Time Checks that the JTA Maximum XA call time is set for the domain. Fails if it is not explicitly set or if the value is less than or equal to the default of 12000 ms. A00320 XA Timeout Checks that the XA timeout is enabled and that the value is '0' for the SOA Data Source (SOADataSource-jdbc.xml) A00330 JDBC Statement Timeout Checks that the Statement Timeout is set for all SOA Data Sources. Fails if the value is not set or if it is set to the default of -1. A00400 XA Driver Checks that the SOA Data Source is configured to use an XA driver. Fails if it is not. A00410 JDBC Capacity Settings Checks that the minimum and maximum capacity are equal for all SOA Data Sources. Fails if they are not and lists specifically which data sources failed. A00500 SOA Roles Checks that the default SOA roles 'SOAAdmin' and 'SOAOperator' are configured for the soa-infra application in the file sytem-jazn-data.xml. Fails if they are not. A00700 SOA-INFRA Deployment Checks that the soa-infra application is deployed to either a cluster, all members of a cluster or a stand alone server. A00710 SOA Deployments Checks that the SOA related applications are deployed to the same domain members as soa-infra. A00720 SOA Library Deployments Checks that the SOA related libraries are deployed to the same domain members as soa-infra. A00730 Data Source Deployments Checks that the SOA Data Sources are all targeted to the same domain members as soa-infra

    Read the article

  • Bash does not remember programs with non 0 exit status in history

    - by Amigable Clark Kant
    I enter a command. It fails. I press arrow up, modify something and enter it again ... hold it right there. It used to work like that. Now it's more like: I enter a command. It fails. I press arrow up, get the last command which didn't fail, likely "ls" or something useless and I type the whole thing again back by hand. What happened? It wasn't always like this. But it's quite some time since this behavior changed, I'll give you that. Some years ago, at least. How do I put some sanity back into my bash prompt?

    Read the article

  • grub2 loopback booting ubuntu server iso

    - by Thermionix
    I've got usb-keys setup to multi-boot different linux images using grub2 loopback. The standard ubuntu release isos boot fine, however when attempting to use the server iso it will fail to install saying 'unable to detect cd-media for installation'. the grub.cfg entry; menuentry "ubuntu-12.04-server-amd64" { set isofile="/boot/ubuntu-12.04-server-amd64.iso" loopback loop $isofile linux (loop)/install/vmlinuz file=$isofile/preseed/ubuntu-server.seed ro noprompt noeject -- initrd (loop)/install/initrd.gz } I've attempted to add the following parameters as the fromiso works for debian images on the key iso-scan/filename=/boot/ubuntu-12.04-server-amd64.iso iso-scan/filename=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso fromiso=/dev/disk/by-uuid/2859-44B7/boot/ubuntu-12.04-server-amd64.iso

    Read the article

  • Client Side Form Validation vs. Server Side Form Validation

    In my opinion, it is mandatory to validate data using client side and server side validation as a fail over process. The client side validation allows users to correct any error before they are sent to the web server for processing, and this allows for an immediate response back to the user regarding data that is not correct or in the proper format that is desired. In addition, this prevents unnecessary interaction between the user and the web server and will free up the server over time compared to doing only server side validation. Server validation is the last line of defense when it comes to validation because you can check to ensure the user’s data is correct before it is used in a business process or stored to a database. Honestly, I cannot foresee a scenario where I would only want to use one form of validation over another especially with the current cost of creating and maintaining data. In my opinion, the redundant validation is well worth the overhead.

    Read the article

  • USB3 boot device disappears post-grub

    - by JoBu1324
    I have an installation of Ubuntu 12.10 on a USB3 device, and it occasionally disappears during boot, dropping me into busybox. This is what I've been able to figure out so far: During a single boot, the following happened: At the grub2 menu, I typed c and dropped to the grub> prompt I typed ls -l and got a list of all the devices, including partitions and UUIDs - the USB3 partitions were available I escaped back to the boot select menu, selected the default item (ubuntu) and hit enter The screen went black for a second before turning into the purple Ubuntu boot screen with the dots (which usually indicates that the boot will fail. When all is well I don't get the black screen) The boot dropped into BusyBox v1.19.3 with the message `ALERT! /dev/disk/by-uuid/[uuid] does not exist blkid displays all of the partitions except those of the USB3 device, as does ls /dev/disk/by-uuid or any of the alternatives.

    Read the article

  • SSIS: Building SQL databases on-the-fly using concatenated SQL scripts

    - by DrJohn
    Over the years I have developed many techniques which help automate the whole SQL Server build process. In my current process, where I need to build entire OLAP data marts on-the-fly, I make regular use of a simple but very effective mechanism to concatenate all the SQL Scripts together from my SSMS (SQL Server Management Studio) projects. This proves invaluable because in two clicks I can redeploy an entire SQL Server database with all tables, views, stored procedures etc. Indeed, I can also use the concatenated SQL scripts with SSIS to build SQL Server databases on-the-fly. You may be surprised to learn that I often redeploy the database several times per day, or even several times per hour, during the development process. This is because the deployment errors are logged and you can quickly see where SQL Scripts have object dependency errors. For example, after changing a table structure you may have forgotten to change any related views. The deployment log immediately points out all the objects which failed to build so you can fix and redeploy the database very quickly. The alternative approach (i.e. doing changes in the database directly using the SSMS UI) would require you to check all dependent objects before making changes. The chances are that you will miss something and wonder why your app returns the wrong data – a common problem caused by changing a table without re-creating dependent views. Using SQL Projects in SSMS A great many developers fail to make use of SQL Projects in SSMS (SQL Server Management Studio). To me they are invaluable way of organizing your SQL Scripts. The screenshot below shows a typical SSMS solution made up of several projects – one project for tables, another for views etc. The key point is that the projects naturally fall into the right order in file system because of the project name. The number in the folder or file name ensures that the projects the SQL scripts are concatenated together in the order that they need to be executed. Hence the script filenames start with 100, 110 etc. Concatenating SQL Scripts To concatenate the SQL Scripts together into one file, I use notepad.exe to create a simple batch file (see example screenshot) which uses the TYPE command to write the content of the SQL Script files into a combined file. As the SQL Scripts are in several folders, I simply use several TYPE command multiple times and append the output together. If you are unfamiliar with batch files, you may not know that the angled bracket (>) means write output of the program into a file. Two angled brackets (>>) means append output of this program into a file. So the command-line DIR > filelist.txt would write the content of the DIR command into a file called filelist.txt. In the example shown above, the concatenated file is called SB_DDS.sql If, like me you place the concatenated file under source code control, then the source code control system will change the file's attribute to "read-only" which in turn would cause the TYPE command to fail. The ATTRIB command can be used to remove the read-only flag. Using SQLCmd to execute the concatenated file Now that the SQL Scripts are all in one big file, we can execute the script against a database using SQLCmd using another batch file as shown below: SQLCmd has numerous options, but the script shown above simply executes the SS_DDS.sql file against the SB_DDS_DB database on the local machine and logs the errors to a file called SB_DDS.log. So after executing the batch file you can simply check the error log to see if your database built without a hitch. If you have errors, then simply fix the source files, re-create the concatenated file and re-run the SQLCmd to rebuild the database. This two click operation allows you to quickly identify and fix errors in your entire database definition.Using SSIS to execute the concatenated file To execute the concatenated SQL script using SSIS, you simply drop an Execute SQL task into your package and set the database connection as normal and then select File Connection as the SQLSourceType (as shown below). Create a file connection to your concatenated SQL script and you are ready to go.   Tips and TricksAdd a new-line at end of every fileThe most common problem encountered with this approach is that the GO statement on the last line of one file is placed on the same line as the comment at the top of the next file by the TYPE command. The easy fix to this is to ensure all your files have a new-line at the end.Remove all USE database statementsThe SQLCmd identifies which database the script should be run against.  So you should remove all USE database commands from your scripts - otherwise you may get unintentional side effects!!Do the Create Database separatelyIf you are using SSIS to create the database as well as create the objects and populate the database, then invoke the CREATE DATABASE command against the master database using a separate package before calling the package that executes the concatenated SQL script.    

    Read the article

  • Trying to compile MobileSubstrate addon - Undefined symbol

    - by eWolf
    Hi! I went through this tutorial to create a MobileSubstrate addon. I could compile the example hook without errors. But as soon as I add #import <SpringBoard/SBAwayController.h> in ExampleHookProtocol.h and SBAwayController *awayController = [SBAwayController sharedAwayController]; in ExampleHookLibrary.mm (as the first line of the __$ExampleHook_AppIcon_Launch function) I get the following error message when attempting to make (triggered by the latter change): Undefined symbols: "_OBJC_CLASS_$_SBAwayController", referenced from: __objc_classrefs__DATA@0 in ExampleHookLibrary.o ld: symbol(s) not found collect2: ld returned 1 exit status make: *** [ExampleHook.dylib] Error 1. The header file for SBAwayController is located in /var/toolchain/sys30/usr/include/SpringBoard, just like SBApplicationIcon.h, which is used by the ExampleHook. I'm compiling on my iPod touch 2G. Can anyone help me? Thanks in advance, Eric

    Read the article

  • How can I fix 'no wubildr' error in WUBI on Windows 7?

    - by Austin
    Good Evening All, I just got my HP Laptop Back from the factory and then I tried to install Ubuntu. It got through the whole installation, however, when I restarted and chose Ubuntu a quick screen flashes that says: Try (hd0,0) NTFS5: no wubildr Try (hd0,1) NTFS5: Then it quickly goes to the Boot Loader which I am presented with: Windows 7 (loader) (on /dev/sda1) Windows Vista (loader) (on /dev/sda2) Windows Vista (loader) (on /dev/sda3) Of course if I click Win 7 it'll go to the main screen to choose between Win 7 or Ubuntu, if I choose Vista, it'll come with an error of sorts. The strange thing is, I looked in my C:/ Drive and I see wubildr and wubilder.mbr Idk if it makes a difference but I am running a 64-bit processor. Installed the 64-bit desktop version and am presented with ultra-fail. I've gone to: http://ubuntuforums.org/showthread.php?s=4d54a8d3760f6fe805156524b7ab9acf&t=798283&page=1 But have had no luck.

    Read the article

  • Is it OK to have multiple asserts in a single unit test?

    - by Restuta
    I think that there are some cases when multiple assertions are needed (e.g. Guard Assertion), but in general I try to avoid this. What is your opinion? Please provide a real word examples when multiple asserts are really needed. Thanks! Edit In the comment to this great post Roy Osherove pointed to the OAPT project that is designed to run each assert in a single test. This is written on projects home page: Proper unit tests should fail for exactly one reason, that’s why you should be using one assert per unit test. And also Roy wrote in comments: My guideline is usually that you test one logical CONCEPT per test. you can have multiple asserts on the same object. they will usually be the same concept being tested.

    Read the article

  • What are the warning signs of impending doom to watch out for on a project?

    - by ConroyP
    Having worked on a failed project is one of the few things that most programmers have in common, regardless of language used, industry or experience. These projects can be great learning experiences, soul-crushing disasters (or both!), and can occur for a multitude of reasons: upper management change of heart under-skilled / under-resourced team emergence of superior competitor during dev cycle over/under management Once you've worked on a couple of such projects, is it possible to recognise at an early stage exactly when a project is doomed to fail? For me, a big sign is having a hard & fast external deadline combined with feature creep. I've seen projects which were well planned out and proceeding right on schedule go horribly off the rails once the late feature requests started to roll in and get added to the final "deliverable". The proposers of these requests earned the nickname of Columbo, due to rarely leaving the room without asking for "just one more thing". What are the warning signs you look out for that set off the alarm bells of impending doom in your head?

    Read the article

  • For reliable code, NModel, Spec Explorer, F# or other?

    - by ja
    I've got a business app in C#, with unit tests. Can I increase the reliability and cut down on my testing time and expense by using NModel or Spec Explorer? Alternately, if I were to rewrite it in F# (or even Haskell), what kinds (if any) of reliability increase might I see? Code Contracts? ASML? I realize this is subjective, and possibly argumentative, so please back up your answers with data, if possible. :) Or maybe an worked example, such as Eric Evans Cargo Shipping System? If we consider Unit tests to be pecific and strong theorems, checked quasi-statically on particular “interesting instances” and Types to be general but weak theorems (usually checked statically), and contracts to be general and strong theorems, checked dynamically for particular instances that occur during regular program operation (from B. Pierce's Types Considered Harmful, where do these other tools fit? We could pose the analogous question for Java, using Java PathFinder, Scala, etc.

    Read the article

  • Buy vs. Build - FTP Service

    - by Joel Martinez
    We have a need to FTP files that are generated by our system, so we're trying to decide whether we should spend the time to build something that meets our criteria (relatively easy, .NET has FTP functionality built in, among other more advanced libs from 3rd parties). Or if we should buy something off the shelf. Our requirements are roughly: Must be able to trigger a file send programmatically Needs to retry N number of times (configurable) Queryable status of FTP requests Callback on completion or fail of an FTP request I don't need to be sold on the relative simplicity of building something like that for myself. However I do want to do the due diligence of seeing what products are available ... because if something does exist that matches the requirements above, I wouldn't mind paying for it :-) Any thoughts or links would be greatly appreciated. Thanks!

    Read the article

  • How can I best study a problem to determine whether recursion can/should be used?

    - by user10326
    In some cases, I fail to see that a problem could be solved by the divide and conquer method. To give a specific example, when studying the find max sub-array problem, my first approach is to brute force it by using a double loop to find the max subarray. When I saw the solution using the divide and conquer approach which is recursion-based, I understood it but ok. From my side, though, when I first read the problem statement, I did not think that recursion is applicable. When studying a problem, is there any technique or trick to see that a recursion based (i.e. divide and conquer) approach can be used or not?

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >