Search Results

Search found 18363 results on 735 pages for 'external ip'.

Page 91/735 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

  • Packet loss with all adapters on one PC only on the LAN

    - by Enigmativity
    I have a Windows 7 64-bit machine that is losing up to 20% of IP packets on both adapters - wireless & LAN. Browser traffic appears to be affected the most, but it is happening to all protocols. All other computers on the network are functioning fine. If I ping from my faulty machine to any machine on the LAN (wired or wirelessly), including the router/gateway and internet sites, I get up to 20% packet loss. If I do the following commands: ipconfig /release ipconfig /renew then I sometimes get my network performance back for a matter of a few seconds to less than a couple of minutes. Rebooting also works for a short period of time. This problem has been occurring for a couple of months and is getting worse. The computer used to work just fine. I updated the wireless adapter firmware the other day with no effect. Does anyone know what is happening?

    Read the article

  • GNS3 Cannot ping/resolve DNS record

    - by Eldad Cohen
    I set up an internet lab with GNS3, which has 3 routers, in each node there is a computer directly connected. One of the hosts is a DNS server, Windows 2003 Server. The other one is a Windows XP machine. Ping is good between routers and machines but no ability to ping domain.com record on DNS server 2003. I set a static nat on the router to route all traffic from gateway to the DNS server internal ip address, still no answer for the dns request. Any ideas or thoughts will be most welcome.

    Read the article

  • Different display arrangements for two identical displays

    - by Niels
    I have a MacBook Pro running OSX Lion and two workplaces with identical setups: at both places I have an 27" LED Cinema display. At one workplace my MacBook is on the left side of the external display, and at the other workplace it is on the right. I would like to have two different display arrangements for the two different setups, however, when I change the display arrangements in System Preferences when connected to one display, the arrangement is changed for the other display as well. I used to have a 27" and a 24" Cinema Display, and OSX used to remember the display arrangements for those different displays, but now the displays are identical, so they use the same arrangements setting. Is there any way to tell OSX to handle two identical displays as different ones so I can configure two different arrangements for the two setups?

    Read the article

  • access_log item w/out IP. Starts with "::1 - - [<date>]"

    - by Meltemi
    Looking at our Apache log I see normal requests like: 174.133.xxx.xxx - - [20/May/2010:17:36:44 -0700] "GET /index.html HTTP/1.1" 200 2004 but every so often i get a cluster of these w/out an IP address. ::1 - - [20/May/2010:18:47:21 -0700] "OPTIONS * HTTP/1.0" 200 - ::1 - - [20/May/2010:18:47:22 -0700] "OPTIONS * HTTP/1.0" 200 - ::1 - - [20/May/2010:18:47:23 -0700] "OPTIONS * HTTP/1.0" 200 - what do they mean and curious what causes them?

    Read the article

  • How to unlock my IP on Centos firewall?

    - by Tomaszs
    I have a VPS with Centos and with firewall that I used to configure by Lxadmin. Now I don't have Lxadmin control panel and can't go to change it by web interface. How to discover what firewall I have on my machine and where is the config with blocked IP so I can remove mine?

    Read the article

  • Can't initialize drive in Windows 7

    - by Abe
    I have a 2.5" laptop harddrive that I plugged into my laptop through a SATA to USB cable. It's powered by an adapter to a normal wall-plug. I want to use it as an external harddrive. It wouldn't initialize (Device is not ready), so as suggested in some instructions I found I uninstalled the drivers, unplugged it and plugged it back in. That worked, and I initialized the drive and formatted it. However I unplugged it after that and a few days later the same strategy does not work and I can't figure out how to use the drive. I can't initialize it and it doesn't show up in my computer.

    Read the article

  • External USB disk drive cannot be remounted in Windows XP

    - by jackhab
    I have Maxtor Basics Desktop 1TB external USB drive connected to Windows XP. The dirve's firmware puts it to sleep after 10-20 min of inactivity and then the drive cannot be mounted unless I reset it via power connector. While in sleep mode I can see the device in the Device Manager under both Disk drives and USB sections. Is there a way to get the drive out of sleep mode without hard reset? Thanks

    Read the article

  • How to automatically show USB camera or memory stick contents in Icewm?

    - by darenw
    I normally use a very lightweight Linux setup. No desktop like Gnome or KDE, just Icewm as the windows manager and nothing else that normal users might consider essential. Well, I do need a file manager - I use Thunar. Recently I've been trying Gnome. Whenever I shove a memory stick into a USB port, or connect my digital camera, it can automatically pop up a file manager showing all the goodies on that device. KDE does this too. I like this. Although quick at the command line, I like not having to go sudo to mount the device and all that. If I want to stick with a lightweight setup using Icewm+Thunar, is there something non-huge I can install to make external devices fire up a Thunar window, or otherwise make access to the contents brainlessly easy?

    Read the article

  • Is my HD broken? Can i use it for anything?

    - by acidzombie24
    Someone suggested formatting my HD so i wont try to read bad data. From what i understand the OS marks which clusters are bad and skips them. So after copying all my data i did a quick format to NTFS. I copied files with an error then i right clicked and tried to create a new folder. I was greeted by this message. I have 926 of 931gb free. Is my external HD broken?

    Read the article

  • Full Backup & Restore for Windows Vista

    - by Thomas Matthews
    I'm looking for a freeware or low cost application that will backup everything, including registry on Windows Vista Home Premium and to restore from a CDROM disk. The destination is an external hard drive on USB 2.0. Searching on SuperUser and Stack Overflow show articles, but don't mention full backup of the registry and complete restore using CDROM. I would also like to have compressed output and incremental backups. One article mentions CloneZilla, but their web page says that the incremental feature is not supported. I am using Windows Vista Home Premium, Service Pack 1. I need to backup 200 GB onto a 230 GB drive and would like to have multiple backups (thus the need for compression). Other requirements: Single file restore Quality is more important than performance. Application must run on Windows Vista. Extra: Run as daemon or background task on 4 user system. Thanks

    Read the article

  • Set Folder Icon for all Os

    - by Am1rr3zA
    Hi, I want set icon to my folder in My external hard drive but when I change it (by right click on it and -> properties -> customize -> change icon (i address the icon from my extenal hard drive)) it just change in my windows and when plug my extenarnal-hard to another windows it's don't show my icon! how should fix this? P.S: is there a way to set icon for folder show in all os (linux, windows, OSX, ..) note: I don't want set icon to 1 drive I want set icon to all my folder in my drive.

    Read the article

  • Set up Windows SBS dns server and vpn clients from brench office

    - by mn
    I have got some clients from bench office which connects vpn to main office. The Router from bench office assigned addresses from DHCP 192.168.1.0/255.255.255.0 and remote gateway assigned vpn ip addresses 10.10.20.0/255.255.255.0. There is a DNS server (Active Directory Win SBS 2000) and vpn client are registered with vpn address (10.10.20.0/255.255.255.0 and domain company.com.pl). I would like to register also primary bench subnet 192.168.1.0/255.255.255.0 with domain for example company.vpn.local I want to access vpn hosts for example: dev3.copmany.pkb.local and dev3.company.com using my Win SBS 2000 DNS server.

    Read the article

  • Squid allow both authenticated and ip based logins

    - by Pete Sampras
    I have a proxy server which allows users to connect and authenticates them via user/pass but some of them are complaining about this method since not many of the available proxy software support that method so I wish to config my squid in such way that it allows members to connect via user/pass or based on their pc ip but I'm not sure if that could work. Anyone with an idea?

    Read the article

  • Setting Up a Virtual Sound Device To Stream Output via TCP/IP

    - by Martindale
    I'm interested in installing a custom driver / device that will open a socket (or listen) and stream audio via TCP/IP in both Windows and Linux. I would like to be able to specify this device as my "Output" for specific applications so that I can route my audio through a completely unique machine (for example, in complex Synergy setups where my headphones might be connected to one machine, but audio is being generated by another.) In Linux, I expect this to be very easy, but I anticipate having to install a custom driver in Windows.

    Read the article

  • Multiple URL on same IP

    - by Samir
    We have added one entry in the DNS as "winstream.workterra.net" , When I type https://windstream.workterra.net its redirecting to windstream login page however if I type "windstream.workterra.net" without https: its getting redirected to workterra login page , Below are the DNS entries , all are pointing to same IP , please let me know if anyone has a resolutoin www.workterra.net @(none) windstrean.workterra.net

    Read the article

  • How to use two external monitors on Alienware m17x along with laptop monitor (total 3 monitors)

    - by Steph
    I'd like to use the native 1920x1200 laptop monitor that comes with the Alienware m17x along with 2 additional external monitors, one through the displayport and another through the hdmi port. Is there any way to do this? And if so how? I've tried to update the nvidia drivers, I've installed ultramon, etc., but I can't seem to make it happen. I've seen posts that suggest it's possible, but I can't seem to figure out how.

    Read the article

  • Nginx Proxying to Multiple IP Addresses for CMS' Website Preview

    - by Matthew Borgman
    First-time poster, so bear with me. I'm relatively new to Nginx, but have managed to figure out what I've needed... until now. Nginx v1.0.15 is proxying to PHP-FPM v.5.3.10, which is listening at http://127.0.0.1:9000. [Knock on wood] everything has been running smoothly in terms of hosting our CMS and many websites. Now, we've developed our CMS and configured Nginx such that each supported website has a preview URL (e.g. http://[WebsiteID].ourcms.com/) where the site can be, you guessed it, previewed in those situations where DNS doesn't yet resolve to our server, etc. Specifically, we use Nginx's Map module (http://wiki.nginx.org/HttpMapModule) and a regular expression in the server_name of the CMS' server{ } block to 1) lookup a website's primary domain name from its preview URL and then 2) forward the request to the "matched" primary domain. The corresponding Nginx configuration: map $host $h { 123.ourcms.com www.example1.com; 456.ourcms.com www.example2.com; 789.ourcms.com www.example3.com; } and server { listen [OurCMSIPAddress]:80; listen [OurCMSIPAddress]:443 ssl; root /var/www/ourcms.com; server_name ~^(.*)\.ourcms\.com$; ssl_certificate /etc/nginx/conf.d/ourcms.com.chained.crt; ssl_certificate_key /etc/nginx/conf.d/ourcms.com.key; location / { proxy_pass http://127.0.0.1/; proxy_set_header Host $h; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; } } (Note: I do realize that the regex in the server_name should be "tighter" for security reasons and match only the format of the website ID (i.e. a UUID in our case).) This configuration works for 99% of our sites... except those that have a dedicated IP address for an installed SSL certificate. A "502 Bad Gateway" is returned for these and I'm unsure as to why. This is how I think the current configuration works for any requests that match the regex (e.g. http://123.ourcms.com/): Nginx looks up the website's primary domain from the mapping, and as a result of the proxy_pass http://127.0.0.1 directive, passes the request back to Nginx itself, which since the proxied request has a hostname corresponding to the website's primary domain name, via the proxy_set_header Host $h directive, Nginx handles the request as if it was as direct request for that hostname. Please correct me if I'm wrong in this understanding. Should I be proxying to those website's dedicated IP addresses? I tried this, but it didn't seem to work? Is there a setting in the Proxy module that I'm missing? Thanks for the help. MB

    Read the article

  • Intranet Ip - Access from Custom Domain

    - by Alexander Wigmore
    I have setup a local intranet in my office using IIS7 (Windows 7 Machine), currently it can be accessed through the PC's static IP, however I would like it so that internally it can just be accessed through an easier method, e.g typing in http://intranet (or something similar). There are over 60 PC's int he office, so individually updating Host files on the PC's is not really ideal. We don't need it to be accessible from the outside world (I.e, we don't care/want it to be an Extranet). Any tips?

    Read the article

  • Latency in TCP/IP-over-Ethernet networks

    - by aix
    What resources (books, Web pages etc) exist out there that: explain the causes of latency in TCP/IP-over-Ethernet networks; mention tools for looking out for things that cause latency (e.g. certain entries in netstat -s); suggest ways to tweak the Linux TCP stack to reduce TCP latency (Nagle, socket buffers etc). The closest I am aware of is this document, but it's rather brief. Alternatively, you're welcome to answer the above questions directly.

    Read the article

  • Linux Defualt Startup Display PCI to fix black boot screen

    - by Jonathan
    You heard it all before black screen on boot after perfectly fine install of most linux ubnuntu mint etc distributions (the netbook works fine) It has an Intel N10 integrated graphics chipset. I have actually found that if I plug in an external display then remove it the default screen turns on and my laptop works fine drivers all great - I have tried the screen cycle button fn f7 but doesn't work when no display is plugged in. It also works out all the correct resolutions and no modification of the grub bootloader or creating any xorg configs. So I think my monitor is forcing to a display that doesn't exist. Do you know if there is anyway I can force it to choose a different screen at boot so I can get a login screen? I can use nomodeset on grub but xrandr cant add the damned 1024 600 60 resolution that I need! Ideas guys?

    Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >