Search Results

Search found 12869 results on 515 pages for 'target exists'.

Page 91/515 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• cannot send mail to postfix /w iptables linux proxy

  - by Juzzam

  I have two separate servers, both running Ubuntu 8.04. Server 1 has the real domain name of our site, let's refer to it as example.com. Server 2 is a mail server I have setup with postfix/courier. The hostname for this server is mail.example.com. I've setup iptables on Server 1 to forward all traffic on port 25 to Server 2. I used this script (except I changed the target ip address and the port from 80 to 25). When I send an email to [email protected] it works. However, when I try to send an email to [email protected] from gmail, I get this error: 550 550 #5.1.0 Address rejected [email protected] (state 14) /var/log/mail.log shows no new lines when this happens. What is strange is that it works with telnet from my local machine. For example: $ telnet example.com 25 220 VO13421.localdomain SMTP Postfix EHLO example.com 250-VO13421.localdomain 250-PIPELINING 250-SIZE 10240000 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN MAIL FROM: [email protected] 250 2.1.0 Ok RCPT TO: [email protected] 250 2.1.5 Ok data 354 Please start mail input. hello user... how have you been? . 250 Mail queued for delivery. quit 221 Closing connection. Good bye. /var/log/mail.log shows success (and the email goes to the maildr): Feb 24 09:47:36 VO13421 postfix/smtpd[2212]: connect from 81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:01 VO13421 postfix/smtpd[2212]: warning: restriction `smtpd_data_restrictions' after `permit' is ignored Feb 24 09:48:01 VO13421 postfix/smtpd[2212]: 65C68120321: client=81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:29 VO13421 postfix/smtpd[2212]: warning: restriction `smtpd_data_restrictions' after `permit' is ignored Feb 24 09:48:29 VO13421 postfix/smtpd[2212]: 6BDFA120321: client=81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:29 VO13421 postfix/cleanup[2216]: 6BDFA120321: message-id= Feb 24 09:48:29 VO13421 postfix/qmgr[2042]: 6BDFA120321: from=, size=395, nrcpt=1 (queue active) Feb 24 09:48:29 VO13421 postfix/virtual[2217]: 6BDFA120321: to=, relay=virtual, delay=0.28, delays=0.25/0.02/0/0.01, dsn=2.0.0, status=sent (delivered to maildir) Feb 24 09:48:29 VO13421 postfix/qmgr[2042]: 6BDFA120321: removed Feb 24 09:48:30 VO13421 postfix/smtpd[2212]: disconnect from 81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] iptables -L -n -v --line on example.com yields the following. Anyone know an iptables command to see the port forwarding? Also, it seems to accept all traffic, that's probably bad right? ;] num pkts bytes target prot opt in out source destination 1 14041 1023K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 338 20722 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 419K packets, 425M bytes) num pkts bytes target prot opt in out source destination 1 13711 2824K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 postconf -n results in: alias_database = hash:/etc/postfix/aliases alias_maps = hash:/etc/postfix/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix delay_warning_time = 4h disable_vrfy_command = yes inet_interfaces = all local_recipient_maps = mailbox_size_limit = 0 masquerade_domains = mail.example.com mail1.example.com masquerade_exceptions = root maximal_backoff_time = 8000s maximal_queue_lifetime = 7d minimal_backoff_time = 1000s mydestination = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mynetworks_style = host myorigin = example.com readme_directory = no recipient_delimiter = + relayhost = smtp_helo_timeout = 60s smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname SMTP $mail_name smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.njabl.org smtpd_delay_reject = yes smtpd_hard_error_limit = 12 smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_limit = 16 smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, permit smtpd_data_restrictions = reject_unauth_pipelining smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_pipelining, permit smtpd_soft_error_limit = 3 smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes unknown_local_recipient_reject_code = 450 virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf virtual_gid_maps = mysql:/etc/postfix/mysql_gid.cf virtual_mailbox_base = /var/spool/mail/virtual virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf virtual_uid_maps = mysql:/etc/postfix/mysql_uid.cf

  Read the article

• cannot send mail to postfix /w iptables linux proxy

  - by Juzzam

  I have two separate servers, both running Ubuntu 8.04. Server 1 has the real domain name of our site, let's refer to it as example.com. Server 2 is a mail server I have setup with postfix/courier. The hostname for this server is mail.example.com. I've setup iptables on Server 1 to forward all traffic on port 25 to Server 2. I used this script (except I changed the target ip address and the port from 80 to 25). When I send an email to [email protected] it works. However, when I try to send an email to [email protected] from gmail, I get this error: 550 550 #5.1.0 Address rejected [email protected] (state 14) /var/log/mail.log shows no new lines when this happens. What is strange is that it works with telnet from my local machine. For example: $ telnet example.com 25 220 VO13421.localdomain SMTP Postfix EHLO example.com 250-VO13421.localdomain 250-PIPELINING 250-SIZE 10240000 250-ETRN 250-STARTTLS 250-ENHANCEDSTATUSCODES 250-8BITMIME 250 DSN MAIL FROM: [email protected] 250 2.1.0 Ok RCPT TO: [email protected] 250 2.1.5 Ok data 354 Please start mail input. hello user... how have you been? . 250 Mail queued for delivery. quit 221 Closing connection. Good bye. /var/log/mail.log shows success (and the email goes to the maildr): Feb 24 09:47:36 VO13421 postfix/smtpd[2212]: connect from 81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:01 VO13421 postfix/smtpd[2212]: warning: restriction `smtpd_data_restrictions' after `permit' is ignored Feb 24 09:48:01 VO13421 postfix/smtpd[2212]: 65C68120321: client=81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:29 VO13421 postfix/smtpd[2212]: warning: restriction `smtpd_data_restrictions' after `permit' is ignored Feb 24 09:48:29 VO13421 postfix/smtpd[2212]: 6BDFA120321: client=81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] Feb 24 09:48:29 VO13421 postfix/cleanup[2216]: 6BDFA120321: message-id= Feb 24 09:48:29 VO13421 postfix/qmgr[2042]: 6BDFA120321: from=, size=395, nrcpt=1 (queue active) Feb 24 09:48:29 VO13421 postfix/virtual[2217]: 6BDFA120321: to=, relay=virtual, delay=0.28, delays=0.25/0.02/0/0.01, dsn=2.0.0, status=sent (delivered to maildir) Feb 24 09:48:29 VO13421 postfix/qmgr[2042]: 6BDFA120321: removed Feb 24 09:48:30 VO13421 postfix/smtpd[2212]: disconnect from 81.208.68.208.static.dnsptr.net[208.68.xxx.xxx] iptables -L -n -v --line on example.com yields the following. Anyone know an iptables command to see the port forwarding? Also, it seems to accept all traffic, that's probably bad right? ;] num pkts bytes target prot opt in out source destination 1 14041 1023K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) num pkts bytes target prot opt in out source destination 1 338 20722 ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 419K packets, 425M bytes) num pkts bytes target prot opt in out source destination 1 13711 2824K ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 postconf -n results in: alias_database = hash:/etc/postfix/aliases alias_maps = hash:/etc/postfix/aliases append_dot_mydomain = no biff = no config_directory = /etc/postfix delay_warning_time = 4h disable_vrfy_command = yes inet_interfaces = all local_recipient_maps = mailbox_size_limit = 0 masquerade_domains = mail.example.com mail1.example.com masquerade_exceptions = root maximal_backoff_time = 8000s maximal_queue_lifetime = 7d minimal_backoff_time = 1000s mydestination = mynetworks = 127.0.0.0/8 [::ffff:127.0.0.0]/104 [::1]/128 mynetworks_style = host myorigin = example.com readme_directory = no recipient_delimiter = + relayhost = smtp_helo_timeout = 60s smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache smtpd_banner = $myhostname SMTP $mail_name smtpd_client_restrictions = reject_rbl_client sbl.spamhaus.org, reject_rbl_client blackholes.easynet.nl, reject_rbl_client dnsbl.njabl.org smtpd_delay_reject = yes smtpd_hard_error_limit = 12 smtpd_helo_required = yes smtpd_helo_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_hostname, reject_invalid_hostname, permit smtpd_recipient_limit = 16 smtpd_recipient_restrictions = reject_unauth_pipelining, permit_mynetworks, reject_non_fqdn_recipient, reject_unknown_recipient_domain, reject_unauth_destination, permit smtpd_data_restrictions = reject_unauth_pipelining smtpd_sender_restrictions = permit_mynetworks, warn_if_reject reject_non_fqdn_sender, reject_unknown_sender_domain, reject_unauth_pipelining, permit smtpd_soft_error_limit = 3 smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtpd_use_tls = yes unknown_local_recipient_reject_code = 450 virtual_alias_maps = mysql:/etc/postfix/mysql_alias.cf virtual_gid_maps = mysql:/etc/postfix/mysql_gid.cf virtual_mailbox_base = /var/spool/mail/virtual virtual_mailbox_domains = mysql:/etc/postfix/mysql_domains.cf virtual_mailbox_maps = mysql:/etc/postfix/mysql_mailbox.cf virtual_uid_maps = mysql:/etc/postfix/mysql_uid.cf

  Read the article

• MPLS basic configuration

  - by Vineet Menon

  I want to test out MPLS VPN in my lab. I have 3 routers. 2 PEs and 1P router, all cisco 2921. Something like this, ----- ---- ----- | PE1 |.1____192.168.1.0____.2| P |.2____192.168.2.0____.1| PE2 | | | | | | | ----- ---- ----- lo0:10.1.1.1 lo0:10.1.1.2 lo0:10.1.1.3 Here's the configuration file for each of them, PE1 router hostname PE1 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! interface Loopback0 ip address 10.1.1.1 255.255.255.255 ! interface GigabitEthernet0/0 ip address 192.168.1.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.1.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.1 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.3 remote-as 100 neighbor 10.1.1.3 update-source Loopback0 neighbor 172.16.1.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.3 activate neighbor 10.1.1.3 send-community extended exit-address-family For P router: hostname P ! no ipv6 cef ip source-route ip cef ! interface Loopback0 ip address 10.1.1.2 255.255.255.255 ! interface GigabitEthernet0/1 ip address 192.168.1.2 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/2 ip address 192.168.2.2 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.2 0.0.0.0 area 0 network 192.168.1.0 0.0.0.255 area 0 network 192.168.2.0 0.0.0.255 area 0 ! For PE2 router: ! hostname PE2 ! no ipv6 cef ip source-route ip cef ! ! ! ip vrf cust1 rd 100:100 route-target export 100:100 route-target import 100:100 ! ! ! interface Loopback0 ip address 10.1.1.3 255.255.255.0 ! interface GigabitEthernet0/0 ip address 192.168.2.1 255.255.255.0 duplex auto speed auto ! interface GigabitEthernet0/1 ip vrf forwarding cust1 ip address 172.16.2.1 255.255.255.0 duplex auto speed auto ! router ospf 1 network 10.1.1.3 0.0.0.0 area 0 network 192.168.2.0 0.0.0.255 area 0 ! router bgp 100 bgp log-neighbor-changes neighbor 10.1.1.1 remote-as 100 neighbor 10.1.1.1 update-source Loopback0 neighbor 172.16.2.2 remote-as 65001 ! address-family vpnv4 neighbor 10.1.1.1 activate neighbor 10.1.1.1 send-community extended exit-address-family ! I am following this article form cisco. But things are not working properly. Any help would be appreciated.

  Read the article

• Handling HumanTask attachments in Oracle BPM 11g PS4FP+ (II)

  - by ccasares

  Retrieving uploaded attachments -UCM- As stated in my previous blog entry, Oracle BPM 11g 11.1.1.5.1 (aka PS4FP) introduced a new cool feature whereby you can use Oracle WebCenter Content (previously known as Oracle UCM) as the repository for the human task attached documents. For more information about how to use or enable this feature, have a look here. The attachment scope (either TASK or PROCESS) also applies to UCM-attachments. But even with this other feature, one question might arise when using UCM attachments. How can I get them from within the process? The first answer would be to use the same getTaskAttachmentContents() XPath function already explained in my previous blog entry. In fact, that's the way it should be. But in Oracle BPM 11g 11.1.1.5.1 (PS4FP) and 11.1.1.6.0 (PS5) there's a bug that prevents you to do that. If you invoke such function against a UCM-attachment, you'll get a null content response (bug#13907552). Even if the attachment was correctly uploaded. While this bug gets fixed, next I will show a workaround that lets me to retrieve the UCM-attached documents from within a BPM process. Besides, the sample will show how to interact with WCC API from within a BPM process.Aside note: I suggest you to read my previous blog entry about Human Task attachments where I briefly describe some concepts that are used next, such as the execData/attachment[] structure. Sample Process I will be using the following sample process: A dummy UserTask using "HumanTask2" Human Task, followed by an Embedded Subprocess that will retrieve the attachments payload. In this case, and here's the key point of the sample, we will retrieve such payload using WebCenter Content WebService API (IDC): and once retrieved, we will write each of them back to a file in the server using a File Adapter service: In detail:  We will use the same attachmentCollection XSD structure and same BusinessObject definition as in the previous blog entry. However we create a separate variable, named attachmentUCM, based on such BusinessObject. We will still need to keep a copy of the HumanTask output's execData structure. Therefore we need to create a new variable of type TaskExecutionData (different one than the other used for non-UCM attachments): As in the non-UCM attachments flow, in the output tab of the UserTask mapping, we'll keep a copy of the execData structure: Now we get into the embedded subprocess that will retrieve the attachments' payload. First, and using an XSLT transformation, we feed the attachmentUCM variable with the following information: The name of each attachment (from execData/attachment/name element) The WebCenter Content ID of the uploaded attachment. This info is stored in execData/attachment/URI element with the format ecm://<id>. As we just want the numeric <id>, we need to get rid of the protocol prefix ("ecm://"). We do so with some XPath functions as detailed below: with these two functions being invoked, respectively: We, again, set the target payload element with an empty string, to get the <payload></payload> tag created. The complete XSLT transformation is shown below. Remember that we're using the XSLT for-each node to create as many target structures as necessary.  Once we have fed the attachmentsUCM structure and so it now contains the name of each of the attachments along with each WCC unique id (dID), it is time to iterate through it and get the payload. Therefore we will use a new embedded subprocess of type MultiInstance, that will iterate over the attachmentsUCM/attachment[] element: In each iteration we will use a Service activity that invokes WCC API through a WebService. Follow these steps to create and configure the Partner Link needed: Login to WCC console with an administrator user (i.e. weblogic). Go to Administration menu and click on "Soap Wsdls" link. We will use the GetFile service to retrieve a file based on its dID. Thus we'll need such service WSDL definition that can be downloaded by clicking the GetFile link. Save the WSDL file in your JDev project folder. In the BPM project's composite view, drag & drop a WebService adapter to create a new External Reference, based on the just added GetFile.wsdl. Name it UCM_GetFile. WCC services are secured through basic HTTP authentication. Therefore we need to enable the just created reference for that: Right-click the reference and click on Configure WS Policies. Under the Security section, click "+" to add the "oracle/wss_username_token_client_policy" policy The last step is to set the credentials for the security policy. For the sample we will use the admin user for WCC (weblogic/welcome1). Open the composite.xml file and select the Source view. Search for the UCM_GetFile entry and add the following highlighted elements into it:   <reference name="UCM_GetFile" ui:wsdlLocation="GetFile.wsdl">     <interface.wsdl interface="http://www.stellent.com/GetFile/#wsdl.interface(GetFileSoap)"/>     <binding.ws port="http://www.stellent.com/GetFile/#wsdl.endpoint(GetFile/GetFileSoap)"                 location="GetFile.wsdl" soapVersion="1.1">       <wsp:PolicyReference URI="oracle/wss_username_token_client_policy"                            orawsp:category="security" orawsp:status="enabled"/>       <property name="weblogic.wsee.wsat.transaction.flowOption"                 type="xs:string" many="false">WSDLDriven</property>       <property name="oracle.webservices.auth.username"                 type="xs:string">weblogic</property>       <property name="oracle.webservices.auth.password"                 type="xs:string">welcome1</property>     </binding.ws>   </reference> Now the new external reference is ready: Once the reference has just been created, we should be able now to use it from our BPM process. However we find here a problem. The WCC GetFile service operation that we will use, GetFileByID, accepts as input a structure similar to this one, where all element tags are optional: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/">    <get:dID>?</get:dID>   <get:rendition>?</get:rendition>   <get:extraProps>      <get:property>         <get:name>?</get:name>         <get:value>?</get:value>      </get:property>   </get:extraProps></get:GetFileByID> and we need to fill up just the <get:dID> tag element. Due to some kind of restriction or bug on WCC, the rest of the tag elements must NOT be sent, not even empty (i.e.: <get:rendition></get:rendition> or <get:rendition/>). A sample request that performs the query just by the dID, must be in the following format: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/">   <get:dID>12345</get:dID></get:GetFileByID> The issue here is that the simple mapping in BPM does create empty tags being a sample result as follows: <get:GetFileByID xmlns:get="http://www.stellent.com/GetFile/"> <get:dID>12345</get:dID> <get:rendition/> <get:extraProps/> </get:GetFileByID> Although the above structure is perfectly valid, it is not accepted by WCC. Therefore, we need to bypass the problem. The workaround we use (many others are available) is to add a Mediator component between the BPM process and the Service that simply copies the input structure from BPM but getting rid of the empty tags. Follow these steps to configure the Mediator: Drag & drop a new Mediator component into the composite. Uncheck the creation of the SOAP bindings and use the Interface Definition from WSDL template and select the existing GetFile.wsdl Double click in the mediator to edit it. Add a static routing rule to the GetFileByID operation, of type Service and select References/UCM_GetFile/GetFileByID target service: Create the request and reply XSLT mappers: Make sure you map only the dID element in the request: And do an Auto-mapper for the whole response: Finally, we can now add and configure the Service activity in the BPM process. Drag & drop it to the embedded subprocess and select the NormalizedGetFile service and getFileByID operation: Map both the input: ...and the output: Once this embedded subprocess ends, we will have all attachments (name + payload) in the attachmentsUCM variable, which is the main goal of this sample. But in order to test everything runs fine, we finish the sample writing each attachment to a file. To that end we include a final embedded subprocess to concurrently iterate through each attachmentsUCM/attachment[] element: On each iteration we will use a Service activity that invokes a File Adapter write service. In here we have two important parameters to set. First, the payload itself. The file adapter awaits binary data in base64 format (string). We have to map it using XPath (Simple mapping doesn't recognize a String as a base64-binary valid target): Second, we must set the target filename using the Service Properties dialog box: Again, note how we're making use of the loopCounter index variable to get the right element within the embedded subprocess iteration. Final blog entry about attachments will handle how to inject documents to Human Tasks from the BPM process and how to share attachments between different User Tasks. Will come soon. Again, once I finish will all posts on this matter, I will upload the whole sample project to java.net.

  Read the article

• How can I block a specific type of DDoS attack?

  - by Mark

  My site is being attacked and is using up all the RAM. I looked at the Apache logs and every malicious hit seems to simply be a POST request on /, which is never required by a normal user. So I thought and wondered if there's any sort of solution or utility that will monitor my Apache logs and block every IP that performs a POST request on the site root. I'm not familiar with DDoS protection and searching didn't seem to give me an answer, so I came here. Thanks. Example logs: 103.3.221.202 - - [30/Sep/2012:16:02:03 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 122.72.80.100 - - [30/Sep/2012:16:02:03 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10_7_4) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 122.72.28.15 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" 210.75.120.5 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Windows NT 6.1; rv:12.0) Gecko/20100101 Firefox/12.0" 122.96.59.103 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Linux; U; Android 2.2; fr-fr; Desire_A8181 Build/FRF91) App3leWebKit/53.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" 122.96.59.103 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Linux; U; Android 2.2; fr-fr; Desire_A8181 Build/FRF91) App3leWebKit/53.1 (KHTML, like Gecko) Version/4.0 Mobile Safari/533.1" 122.72.124.3 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (X11; Ubuntu; Linux i686; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.112.148 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.1" 302 485 "-" "Mozilla/5.0 (Macintosh; Intel Mac OS X 10.7; rv:13.0) Gecko/20100101 Firefox/13.0.1" 190.39.210.26 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.0" 302 485 "-" "Mozilla/5.0 (Windows NT 6.0; rv:13.0) Gecko/20100101 Firefox/13.0.1" 210.213.245.230 - - [30/Sep/2012:16:02:04 +0000] "POST / HTTP/1.0" 302 485 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPhone; CPU iPhone OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 101.44.1.28 - - [30/Sep/2012:16:02:14 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 103.3.221.202 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 466 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 101.44.1.25 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 101.44.1.25 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPhone; CPU iPhone OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 211.161.152.108 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 211.161.152.106 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:5.0.1) Gecko/20100101 Firefox/5.0.1" 103.3.221.202 - - [30/Sep/2012:16:02:13 +0000] "POST / HTTP/1.1" 302 466 "-" "Mozilla/5.0 (iPad; CPU OS 5_1_1 like Mac OS X) AppleWebKit/534.46 (KHTML, like Gecko) Version/5.1 Mobile/9B206 Safari/7534.48.3" 101.44.1.28 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1; SV1; MRA 5.8 (build 4157); .NET CLR 2.0.50727; AskTbPTV/5.11.3.15590)" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 211.161.152.104 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 6.0; Windows NT 5.1)" 211.161.152.105 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; rv:1.9.2) Gecko/20100115 Firefox/3.6" 101.44.1.25 - - [30/Sep/2012:16:02:10 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1) AppleWebKit/536.11 (KHTML, like Gecko) Chrome/20.0.1132.47 Safari/536.11" 122.72.124.2 - - [30/Sep/2012:16:02:17 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.124.2 - - [30/Sep/2012:16:02:11 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 122.72.124.2 - - [30/Sep/2012:16:02:17 +0000] "POST / HTTP/1.1" 302 522 "-" "Mozilla/5.0 (Windows NT 5.1; rv:13.0) Gecko/20100101 Firefox/13.0.1" 210.213.245.230 - - [30/Sep/2012:16:02:12 +0000] "POST / HTTP/1.0" 302 522 "-" "Mozilla/4.0 (compatible; MSIE 7.0; Windows NT 5.1; SV1; .NET CLR 2.0.50727)" iptables -L: Chain INPUT (policy ACCEPT) target prot opt source destination Chain FORWARD (policy ACCEPT) target prot opt source destination Chain OUTPUT (policy ACCEPT) target prot opt source destination - bui@debian:~$ sudo iptables -I INPUT 1 -m string --algo bm --string 'Keep-Alive: 300' -j DROP iptables: No chain/target/match by that name. bui@debian:~$ sudo iptables -A INPUT -m string --algo bm --string 'Keep-Alive: 300' -j DROP iptables: No chain/target/match by that name.

  Read the article

• C# 4: The Curious ConcurrentDictionary

  - by James Michael Hare

  In my previous post (here) I did a comparison of the new ConcurrentQueue versus the old standard of a System.Collections.Generic Queue with simple locking.  The results were exactly what I would have hoped, that the ConcurrentQueue was faster with multi-threading for most all situations.  In addition, concurrent collections have the added benefit that you can enumerate them even if they're being modified. So I set out to see what the improvements would be for the ConcurrentDictionary, would it have the same performance benefits as the ConcurrentQueue did?  Well, after running some tests and multiple tweaks and tunes, I have good and bad news. But first, let's look at the tests.  Obviously there's many things we can do with a dictionary.  One of the most notable uses, of course, in a multi-threaded environment is for a small, local in-memory cache.  So I set about to do a very simple simulation of a cache where I would create a test class that I'll just call an Accessor.  This accessor will attempt to look up a key in the dictionary, and if the key exists, it stops (i.e. a cache "hit").  However, if the lookup fails, it will then try to add the key and value to the dictionary (i.e. a cache "miss").  So here's the Accessor that will run the tests: 1: internal class Accessor 2: { 3: public int Hits { get; set; } 4: public int Misses { get; set; } 5: public Func<int, string> GetDelegate { get; set; } 6: public Action<int, string> AddDelegate { get; set; } 7: public int Iterations { get; set; } 8: public int MaxRange { get; set; } 9: public int Seed { get; set; } 10:  11: public void Access() 12: { 13: var randomGenerator = new Random(Seed); 14:  15: for (int i=0; i<Iterations; i++) 16: { 17: // give a wide spread so will have some duplicates and some unique 18: var target = randomGenerator.Next(1, MaxRange); 19:  20: // attempt to grab the item from the cache 21: var result = GetDelegate(target); 22:  23: // if the item doesn't exist, add it 24: if(result == null) 25: { 26: AddDelegate(target, target.ToString()); 27: Misses++; 28: } 29: else 30: { 31: Hits++; 32: } 33: } 34: } 35: } Note that so I could test different implementations, I defined a GetDelegate and AddDelegate that will call the appropriate dictionary methods to add or retrieve items in the cache using various techniques. So let's examine the three techniques I decided to test: Dictionary with mutex - Just your standard generic Dictionary with a simple lock construct on an internal object. Dictionary with ReaderWriterLockSlim - Same Dictionary, but now using a lock designed to let multiple readers access simultaneously and then locked when a writer needs access. ConcurrentDictionary - The new ConcurrentDictionary from System.Collections.Concurrent that is supposed to be optimized to allow multiple threads to access safely. So the approach to each of these is also fairly straight-forward.  Let's look at the GetDelegate and AddDelegate implementations for the Dictionary with mutex lock: 1: var addDelegate = (key,val) => 2: { 3: lock (_mutex) 4: { 5: _dictionary[key] = val; 6: } 7: }; 8: var getDelegate = (key) => 9: { 10: lock (_mutex) 11: { 12: string val; 13: return _dictionary.TryGetValue(key, out val) ? val : null; 14: } 15: }; Nothing new or fancy here, just your basic lock on a private object and then query/insert into the Dictionary. Now, for the Dictionary with ReadWriteLockSlim it's a little more complex: 1: var addDelegate = (key,val) => 2: { 3: _readerWriterLock.EnterWriteLock(); 4: _dictionary[key] = val; 5: _readerWriterLock.ExitWriteLock(); 6: }; 7: var getDelegate = (key) => 8: { 9: string val; 10: _readerWriterLock.EnterReadLock(); 11: if(!_dictionary.TryGetValue(key, out val)) 12: { 13: val = null; 14: } 15: _readerWriterLock.ExitReadLock(); 16: return val; 17: }; And finally, the ConcurrentDictionary, which since it does all it's own concurrency control, is remarkably elegant and simple: 1: var addDelegate = (key,val) => 2: { 3: _concurrentDictionary[key] = val; 4: }; 5: var getDelegate = (key) => 6: { 7: string s; 8: return _concurrentDictionary.TryGetValue(key, out s) ? s : null; 9: };                    Then, I set up a test harness that would simply ask the user for the number of concurrent Accessors to attempt to Access the cache (as specified in Accessor.Access() above) and then let them fly and see how long it took them all to complete.  Each of these tests was run with 10,000,000 cache accesses divided among the available Accessor instances.  All times are in milliseconds. 1: Dictionary with Mutex Locking 2: --------------------------------------------------- 3: Accessors Mostly Misses Mostly Hits 4: 1 7916 3285 5: 10 8293 3481 6: 100 8799 3532 7: 1000 8815 3584 8:  9:  10: Dictionary with ReaderWriterLockSlim Locking 11: --------------------------------------------------- 12: Accessors Mostly Misses Mostly Hits 13: 1 8445 3624 14: 10 11002 4119 15: 100 11076 3992 16: 1000 14794 4861 17:  18:  19: Concurrent Dictionary 20: --------------------------------------------------- 21: Accessors Mostly Misses Mostly Hits 22: 1 17443 3726 23: 10 14181 1897 24: 100 15141 1994 25: 1000 17209 2128 The first test I did across the board is the Mostly Misses category.  The mostly misses (more adds because data requested was not in the dictionary) shows an interesting trend.  In both cases the Dictionary with the simple mutex lock is much faster, and the ConcurrentDictionary is the slowest solution.  But this got me thinking, and a little research seemed to confirm it, maybe the ConcurrentDictionary is more optimized to concurrent "gets" than "adds".  So since the ratio of misses to hits were 2 to 1, I decided to reverse that and see the results. So I tweaked the data so that the number of keys were much smaller than the number of iterations to give me about a 2 to 1 ration of hits to misses (twice as likely to already find the item in the cache than to need to add it).  And yes, indeed here we see that the ConcurrentDictionary is indeed faster than the standard Dictionary here.  I have a strong feeling that as the ration of hits-to-misses gets higher and higher these number gets even better as well.  This makes sense since the ConcurrentDictionary is read-optimized. Also note that I tried the tests with capacity and concurrency hints on the ConcurrentDictionary but saw very little improvement, I think this is largely because on the 10,000,000 hit test it quickly ramped up to the correct capacity and concurrency and thus the impact was limited to the first few milliseconds of the run. So what does this tell us?  Well, as in all things, ConcurrentDictionary is not a panacea.  It won't solve all your woes and it shouldn't be the only Dictionary you ever use.  So when should we use each? Use System.Collections.Generic.Dictionary when: You need a single-threaded Dictionary (no locking needed). You need a multi-threaded Dictionary that is loaded only once at creation and never modified (no locking needed). You need a multi-threaded Dictionary to store items where writes are far more prevalent than reads (locking needed). And use System.Collections.Concurrent.ConcurrentDictionary when: You need a multi-threaded Dictionary where the writes are far more prevalent than reads. You need to be able to iterate over the collection without locking it even if its being modified. Both Dictionaries have their strong suits, I have a feeling this is just one where you need to know from design what you hope to use it for and make your decision based on that criteria.

  Read the article

• Parallelism in .NET – Part 12, More on Task Decomposition

  - by Reed

  Many tasks can be decomposed using a Data Decomposition approach, but often, this is not appropriate.  Frequently, decomposing the problem into distinctive tasks that must be performed is a more natural abstraction. However, as I mentioned in Part 1, Task Decomposition tends to be a bit more difficult than data decomposition, and can require a bit more effort.  Before we being parallelizing our algorithm based on the tasks being performed, we need to decompose our problem, and take special care of certain considerations such as ordering and grouping of tasks. Up to this point in this series, I’ve focused on parallelization techniques which are most appropriate when a problem space can be decomposed by data.  Using PLINQ and the Parallel class, I’ve shown how problem spaces where there is a collection of data, and each element needs to be processed, can potentially be parallelized. However, there are many other routines where this is not appropriate.  Often, instead of working on a collection of data, there is a single piece of data which must be processed using an algorithm or series of algorithms.  Here, there is no collection of data, but there may still be opportunities for parallelism. As I mentioned before, in cases like this, the approach is to look at your overall routine, and decompose your problem space based on tasks.  The idea here is to look for discrete “tasks,” individual pieces of work which can be conceptually thought of as a single operation. Let’s revisit the example I used in Part 1, an application startup path.  Say we want our program, at startup, to do a bunch of individual actions, or “tasks”.  The following is our list of duties we must perform right at startup: Display a splash screen Request a license from our license manager Check for an update to the software from our web server If an update is available, download it Setup our menu structure based on our current license Open and display our main, welcome Window Hide the splash screen The first step in Task Decomposition is breaking up the problem space into discrete tasks. This, naturally, can be abstracted as seven discrete tasks.  In the serial version of our program, if we were to diagram this, the general process would appear as: These tasks, obviously, provide some opportunities for parallelism.  Before we can parallelize this routine, we need to analyze these tasks, and find any dependencies between tasks.  In this case, our dependencies include: The splash screen must be displayed first, and as quickly as possible. We can’t download an update before we see whether one exists. Our menu structure depends on our license, so we must check for the license before setting up the menus. Since our welcome screen will notify the user of an update, we can’t show it until we’ve downloaded the update. Since our welcome screen includes menus that are customized based off the licensing, we can’t display it until we’ve received a license. We can’t hide the splash until our welcome screen is displayed. By listing our dependencies, we start to see the natural ordering that must occur for the tasks to be processed correctly. The second step in Task Decomposition is determining the dependencies between tasks, and ordering tasks based on their dependencies. Looking at these tasks, and looking at all the dependencies, we quickly see that even a simple decomposition such as this one can get quite complicated.  In order to simplify the problem of defining the dependencies, it’s often a useful practice to group our tasks into larger, discrete tasks.  The goal when grouping tasks is that you want to make each task “group” have as few dependencies as possible to other tasks or groups, and then work out the dependencies within that group.  Typically, this works best when any external dependency is based on the “last” task within the group when it’s ordered, although that is not a firm requirement.  This process is often called Grouping Tasks.  In our case, we can easily group together tasks, effectively turning this into four discrete task groups: 1. Show our splash screen – This needs to be left as its own task.  First, multiple things depend on this task, mainly because we want this to start before any other action, and start as quickly as possible. 2. Check for Update and Download the Update if it Exists - These two tasks logically group together.  We know we only download an update if the update exists, so that naturally follows.  This task has one dependency as an input, and other tasks only rely on the final task within this group. 3. Request a License, and then Setup the Menus – Here, we can group these two tasks together.  Although we mentioned that our welcome screen depends on the license returned, it also depends on setting up the menu, which is the final task here.  Setting up our menus cannot happen until after our license is requested.  By grouping these together, we further reduce our problem space. 4. Display welcome and hide splash - Finally, we can display our welcome window and hide our splash screen.  This task group depends on all three previous task groups – it cannot happen until all three of the previous groups have completed. By grouping the tasks together, we reduce our problem space, and can naturally see a pattern for how this process can be parallelized.  The diagram below shows one approach: The orange boxes show each task group, with each task represented within.  We can, now, effectively take these tasks, and run a large portion of this process in parallel, including the portions which may be the most time consuming.  We’ve now created two parallel paths which our process execution can follow, hopefully speeding up the application startup time dramatically. The main point to remember here is that, when decomposing your problem space by tasks, you need to: Define each discrete action as an individual Task Discover dependencies between your tasks Group tasks based on their dependencies Order the tasks and groups of tasks

  Read the article

• JQuery > XSLT Plugin > Component returned failure code: 0x80600011 [nsIXSLTProcessorObsolete.transfo

  - by Sean Ochoa

  So, I'm using the XSLT plugin for JQuery, and here's my code: function AddPlotcardEventHandlers(){ // some code } function reportError(exception){ alert(exception.constructor.name + " Exception: " + ((exception.name) ? exception.name : "[unknown name]") + " - " + exception.message); } function GetPlotcards(){ $("#content").xslt("../xml/plotcards.xml","../xslt/plotcards.xsl", AddPlotcardEventHandlers,reportError); } Here's the modified jquery plugin. I say that its modified because I've added callbacks for success and error handling. /* * jquery.xslt.js * * Copyright (c) 2005-2008 Johann Burkard (<mailto:[email protected]>) * <http://eaio.com> * * Permission is hereby granted, free of charge, to any person obtaining a * copy of this software and associated documentation files (the "Software"), * to deal in the Software without restriction, including without limitation * the rights to use, copy, modify, merge, publish, distribute, sublicense, * and/or sell copies of the Software, and to permit persons to whom the * Software is furnished to do so, subject to the following conditions: * * The above copyright notice and this permission notice shall be included * in all copies or substantial portions of the Software. * * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN * NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, * DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR * OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE * USE OR OTHER DEALINGS IN THE SOFTWARE. * */ /** * jQuery client-side XSLT plugins. * * @author <a href="mailto:[email protected]">Johann Burkard</a> * @version $Id: jquery.xslt.js,v 1.10 2008/08/29 21:34:24 Johann Exp $ */ (function($) { $.fn.xslt = function() { return this; } var str = /^\s*</; if (document.recalc) { // IE 5+ $.fn.xslt = function(xml, xslt, onSuccess, onError) { try{ var target = $(this); var change = function() { try{ var c = 'complete'; if (xm.readyState == c && xs.readyState == c) { window.setTimeout(function() { target.html(xm.transformNode(xs.XMLDocument)); if (onSuccess) onSuccess(); }, 50); } }catch(exception){ if (onError) onError(exception); } }; var xm = document.createElement('xml'); xm.onreadystatechange = change; xm[str.test(xml) ? "innerHTML" : "src"] = xml; var xs = document.createElement('xml'); xs.onreadystatechange = change; xs[str.test(xslt) ? "innerHTML" : "src"] = xslt; $('body').append(xm).append(xs); return this; }catch(exception){ if (onError) onError(exception); } }; } else if (window.DOMParser != undefined && window.XMLHttpRequest != undefined && window.XSLTProcessor != undefined) { // Mozilla 0.9.4+, Opera 9+ var processor = new XSLTProcessor(); var support = false; if ($.isFunction(processor.transformDocument)) { support = window.XMLSerializer != undefined; } else { support = true; } if (support) { $.fn.xslt = function(xml, xslt, onSuccess, onError) { try{ var target = $(this); var transformed = false; var xm = { readyState: 4 }; var xs = { readyState: 4 }; var change = function() { try{ if (xm.readyState == 4 && xs.readyState == 4 && !transformed) { var processor = new XSLTProcessor(); if ($.isFunction(processor.transformDocument)) { // obsolete Mozilla interface resultDoc = document.implementation.createDocument("", "", null); processor.transformDocument(xm.responseXML, xs.responseXML, resultDoc, null); target.html(new XMLSerializer().serializeToString(resultDoc)); } else { processor.importStylesheet(xs.responseXML); resultDoc = processor.transformToFragment(xm.responseXML, document); target.empty().append(resultDoc); } transformed = true; if (onSuccess) onSuccess(); } }catch(exception){ if (onError) onError(exception); } }; if (str.test(xml)) { xm.responseXML = new DOMParser().parseFromString(xml, "text/xml"); } else { xm = $.ajax({ dataType: "xml", url: xml}); xm.onreadystatechange = change; } if (str.test(xslt)) { xs.responseXML = new DOMParser().parseFromString(xslt, "text/xml"); change(); } else { xs = $.ajax({ dataType: "xml", url: xslt}); xs.onreadystatechange = change; } }catch(exception){ if (onError) onError(exception); }finally{ return this; } }; } } })(jQuery); And, here's my error msg: Object Exception: [unknown name] - Component returned failure code: 0x80600011 [nsIXSLTProcessorObsolete.transformDocument] Here's the info on the browser that I'm using for testing (with firebug v1.5.4 add-on installed): Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US; rv:1.9.2.3) Gecko/20100401 Firefox/3.6.3 I'm really not sure what to do about this.... any thoughts?

  Read the article

• Handling HumanTask attachments in Oracle BPM 11g PS4FP+ (I)

  - by ccasares

  Adding attachments to a HumanTask is a feature that exists in Oracle HWF (Human Workflow) since 10g. However, in 11g there have been many improvements on this feature and this entry will try to summarize them. Oracle BPM 11g 11.1.1.5.1 (aka PS4 Feature Pack or PS4FP) introduced two great features: Ability to link attachments at a Task scope or at a Process scope: "Task" attachments are only visible within the scope (lifetime) of a task. This means that, initially, any member of the assignment pattern of the Human Task will be able to handle (add, review or remove) attachments. However, once the task is completed, subsequent human tasks will not have access to them. This does not mean those attachments got lost. Once the human task is completed, attachments can be retrieved in order to, i.e., check them in to a Content Server or to inject them to a new and different human task. Aside note: a "re-initiated" human task will inherit comments and attachments, along with history and -optionally- payload. See here for more info. "Process" attachments are visible within the scope of the process. This means that subsequent human tasks in the same process instance will have access to them. Ability to use Oracle WebCenter Content (previously known as "Oracle UCM") as the backend for the attachments instead of using HWF database backend. This feature adds all content server document lifecycle capabilities to HWF attachments (versioning, RBAC, metadata management, etc). As of today, only Oracle WCC is supported. However, Oracle BPM Suite does include a license of Oracle WCC for the solely usage of document management within BPM scope. Here are some code samples that leverage the above features. Retrieving uploaded attachments -Non UCM- Non UCM attachments (default ones or those that have existed from 10g, and are stored "as-is" in HWK database backend) can be retrieved after the completion of the Human Task. Firstly, we need to know whether any attachment has been effectively uploaded to the human task. There are two ways to find it out: Through an XPath function: Checking the execData/attachment[] structure. For example: Once we are sure one ore more attachments were uploaded to the Human Task, we want to get them. In this example, by "get" I mean to get the attachment name and the payload of the file. Aside note: Oracle HWF lets you to upload two kind of [non-UCM] attachments: a desktop document and a Web URL. This example focuses just on the desktop document one. In order to "retrieve" an uploaded Web URL, you can get it directly from the execData/attachment[] structure. Attachment content (payload) is retrieved through the getTaskAttachmentContents() XPath function: This example shows how to retrieve as many attachments as those had been uploaded to the Human Task and write them to the server using the File Adapter service. The sample process excerpt is as follows:  A dummy UserTask using "HumanTask1" Human Task followed by a Embedded Subprocess that will retrieve the attachments (we're assuming at least one attachment is uploaded): and once retrieved, we will write each of them back to a file in the server using a File Adapter service: In detail: We've defined an XSD structure that will hold the attachments (both name and payload): Then, we can create a BusinessObject based on such element (attachmentCollection) and create a variable (named attachmentBPM) of such BusinessObject type. We will also need to keep a copy of the HumanTask output's execData structure. Therefore we need to create a variable of type TaskExecutionData... ...and copy the HumanTask output execData to it: Now we get into the embedded subprocess that will retrieve the attachments' payload. First, and using an XSLT transformation, we feed the attachmentBPM variable with the name of each attachment and setting an empty value to the payload: Please note that we're using the XSLT for-each node to create as many target structures as necessary. Also note that we're setting an Empty text to the payload variable. The reason for this is to make sure the <payload></payload> tag gets created. This is needed when we map the payload to the XML variable later. Aside note: We are assuming that we're retrieving non-UCM attachments. However in real life you might want to check the type of attachment you're handling. The execData/attachment[]/storageType contains the values "UCM" for UCM type attachments, "TASK" for non-UCM ones or "URL" for Web URL ones. Those values are part of the "Ext.Com.Oracle.Xmlns.Bpel.Workflow.Task.StorageTypeEnum" enumeration. Once we have fed the attachmentsBPM structure and so it now contains the name of each of the attachments, it is time to iterate through it and get the payload. Therefore we will use a new embedded subprocess of type MultiInstance, that will iterate over the attachmentsBPM/attachment[] element: In every iteration we will use a Script activity to map the corresponding payload element with the result of the XPath function getTaskAttachmentContents(). Please, note how the target array element is indexed with the loopCounter predefined variable, so that we make sure we're feeding the right element during the array iteration:  The XPath function used looks as follows: hwf:getTaskAttachmentContents(bpmn:getDataObject('UserTask1LocalExecData')/ns1:systemAttributes/ns1:taskId, bpmn:getDataObject('attachmentsBPM')/ns:attachment[bpmn:getActivityInstanceAttribute('SUBPROCESS3067107484296', 'loopCounter')]/ns:fileName)  where the input parameters are: taskId of the just completed Human Task attachment name we're retrieving the payload from array index (loopCounter predefined variable)  Aside note: The reason whereby we're iterating the execData/attachment[] structure through embedded subprocess and not, i.e., using XSLT and for-each nodes, is mostly because the getTaskAttachmentContents() XPath function is currently not available in XSLT mappings. So all this example might be considered as a workaround until this gets fixed/enhanced in future releases. Once this embedded subprocess ends, we will have all attachments (name + payload) in the attachmentsBPM variable, which is the main goal of this sample. But in order to test everything runs fine, we finish the sample writing each attachment to a file. To that end we include a final embedded subprocess to concurrently iterate through each attachmentsBPM/attachment[] element: On each iteration we will use a Service activity that invokes a File Adapter write service. In here we have two important parameters to set. First, the payload itself. The file adapter awaits binary data in base64 format (string). We have to map it using XPath (Simple mapping doesn't recognize a String as a base64-binary valid target):  Second, we must set the target filename using the Service Properties dialog box:  Again, note how we're making use of the loopCounter index variable to get the right element within the embedded subprocess iteration. Handling UCM attachments will be part of a different and upcoming blog entry. Once I finish will all posts on this matter, I will upload the whole sample project to java.net.

  Read the article

• CI Deployment Of Azure Web Roles Using TeamCity

  - by srkirkland

  After recently migrating an important new website to use Windows Azure “Web Roles” I wanted an easier way to deploy new versions to the Azure Staging environment as well as a reliable process to rollback deployments to a certain “known good” source control commit checkpoint.  By configuring our JetBrains’ TeamCity CI server to utilize Windows Azure PowerShell cmdlets to create new automated deployments, I’ll show you how to take control of your Azure publish process. Step 0: Configuring your Azure Project in Visual Studio Before we can start looking at automating the deployment, we should make sure manual deployments from Visual Studio are working properly.  Detailed information for setting up deployments can be found at http://msdn.microsoft.com/en-us/library/windowsazure/ff683672.aspx#PublishAzure or by doing some quick Googling, but the basics are as follows: Install the prerequisite Windows Azure SDK Create an Azure project by right-clicking on your web project and choosing “Add Windows Azure Cloud Service Project” (or by manually adding that project type) Configure your Role and Service Configuration/Definition as desired Right-click on your azure project and choose “Publish,” create a publish profile, and push to your web role You don’t actually have to do step #4 and create a publish profile, but it’s a good exercise to make sure everything is working properly.  Once your Windows Azure project is setup correctly, we are ready to move on to understanding the Azure Publish process. Understanding the Azure Publish Process The actual Windows Azure project is fairly simple at its core—it builds your dependent roles (in our case, a web role) against a specific service and build configuration, and outputs two files: ServiceConfiguration.Cloud.cscfg: This is just the file containing your package configuration info, for example Instance Count, OsFamily, ConnectionString and other Setting information. ProjectName.Azure.cspkg: This is the package file that contains the guts of your deployment, including all deployable files. When you package your Azure project, these two files will be created within the directory ./[ProjectName].Azure/bin/[ConfigName]/app.publish/.  If you want to build your Azure Project from the command line, it’s as simple as calling MSBuild on the “Publish” target: msbuild.exe /target:Publish Windows Azure PowerShell Cmdlets The last pieces of the puzzle that make CI automation possible are the Azure PowerShell Cmdlets (http://msdn.microsoft.com/en-us/library/windowsazure/jj156055.aspx).  These cmdlets are what will let us create deployments without Visual Studio or other user intervention. Preparing TeamCity for Azure Deployments Now we are ready to get our TeamCity server setup so it can build and deploy Windows Azure projects, which we now know requires the Azure SDK and the Windows Azure PowerShell Cmdlets. Installing the Azure SDK is easy enough, just go to https://www.windowsazure.com/en-us/develop/net/ and click “Install” Once this SDK is installed, I recommend running a test build to make sure your project is building correctly.  You’ll want to setup your build step using MSBuild with the “Publish” target against your solution file.  Mine looks like this: Assuming the build was successful, you will now have the two *.cspkg and *cscfg files within your build directory.  If the build was red (failed), take a look at the build logs and keep an eye out for “unsupported project type” or other build errors, which will need to be addressed before the CI deployment can be completed. With a successful build we are now ready to install and configure the Windows Azure PowerShell Cmdlets: Follow the instructions at http://msdn.microsoft.com/en-us/library/windowsazure/jj554332 to install the Cmdlets and configure PowerShell After installing the Cmdlets, you’ll need to get your Azure Subscription Info using the Get-AzurePublishSettingsFile command. Store the resulting *.publishsettings file somewhere you can get to easily, like C:\TeamCity, because you will need to reference it later from your deploy script. Scripting the CI Deploy Process Now that the cmdlets are installed on our TeamCity server, we are ready to script the actual deployment using a TeamCity “PowerShell” build runner.  Before we look at any code, here’s a breakdown of our deployment algorithm: Setup your variables, including the location of the *.cspkg and *cscfg files produced in the earlier MSBuild step (remember, the folder is something like [ProjectName].Azure/bin/[ConfigName]/app.publish/ Import the Windows Azure PowerShell Cmdlets Import and set your Azure Subscription information (this is basically your authentication/authorization step, so protect your settings file Now look for a current deployment, and if you find one Upgrade it, else Create a new deployment Pretty simple and straightforward.  Now let’s look at the code (also available as a gist here: https://gist.github.com/3694398): $subscription = "[Your Subscription Name]" $service = "[Your Azure Service Name]" $slot = "staging" #staging or production $package = "[ProjectName]\bin\[BuildConfigName]\app.publish\[ProjectName].cspkg" $configuration = "[ProjectName]\bin\[BuildConfigName]\app.publish\ServiceConfiguration.Cloud.cscfg" $timeStampFormat = "g" $deploymentLabel = "ContinuousDeploy to $service v%build.number%"   Write-Output "Running Azure Imports" Import-Module "C:\Program Files (x86)\Microsoft SDKs\Windows Azure\PowerShell\Azure\*.psd1" Import-AzurePublishSettingsFile "C:\TeamCity\[PSFileName].publishsettings" Set-AzureSubscription -CurrentStorageAccount $service -SubscriptionName $subscription   function Publish(){ $deployment = Get-AzureDeployment -ServiceName $service -Slot $slot -ErrorVariable a -ErrorAction silentlycontinue   if ($a[0] -ne $null) { Write-Output "$(Get-Date -f $timeStampFormat) - No deployment is detected. Creating a new deployment. " } if ($deployment.Name -ne $null) { #Update deployment inplace (usually faster, cheaper, won't destroy VIP) Write-Output "$(Get-Date -f $timeStampFormat) - Deployment exists in $servicename. Upgrading deployment." UpgradeDeployment } else { CreateNewDeployment } }   function CreateNewDeployment() { write-progress -id 3 -activity "Creating New Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: In progress"   $opstat = New-AzureDeployment -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Creating New Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Creating New Deployment: Complete, Deployment ID: $completeDeploymentID" }   function UpgradeDeployment() { write-progress -id 3 -activity "Upgrading Deployment" -Status "In progress" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: In progress"   # perform Update-Deployment $setdeployment = Set-AzureDeployment -Upgrade -Slot $slot -Package $package -Configuration $configuration -label $deploymentLabel -ServiceName $service -Force   $completeDeployment = Get-AzureDeployment -ServiceName $service -Slot $slot $completeDeploymentID = $completeDeployment.deploymentid   write-progress -id 3 -activity "Upgrading Deployment" -completed -Status "Complete" Write-Output "$(Get-Date -f $timeStampFormat) - Upgrading Deployment: Complete, Deployment ID: $completeDeploymentID" }   Write-Output "Create Azure Deployment" Publish   Creating the TeamCity Build Step The only thing left is to create a second build step, after your MSBuild “Publish” step, with the build runner type “PowerShell”.  Then set your script to “Source Code,” the script execution mode to “Put script into PowerShell stdin with “-Command” arguments” and then copy/paste in the above script (replacing the placeholder sections with your values).  This should look like the following:   Wrap Up After combining the MSBuild /target:Publish step (which creates the necessary Windows Azure *.cspkg and *.cscfg files) and a PowerShell script step which utilizes the Azure PowerShell Cmdlets, we have a fully deployable build configuration in TeamCity.  You can configure this step to run whenever you’d like using build triggers – for example, you could even deploy whenever a new master branch deploy comes in and passes all required tests. In the script I’ve hardcoded that every deployment goes to the Staging environment on Azure, but you could deploy straight to Production if you want to, or even setup a deployment configuration variable and set it as desired. After your TeamCity Build Configuration is complete, you’ll see something that looks like this: Whenever you click the “Run” button, all of your code will be compiled, published, and deployed to Windows Azure! One additional enormous benefit of automating the process this way is that you can easily deploy any specific source control changeset by clicking the little ellipsis button next to "Run.”  This will bring up a dialog like the one below, where you can select the last change to use for your deployment.  Since Azure Web Role deployments don’t have any rollback functionality, this is a critical feature.   Enjoy!

  Read the article

• Please help me correct the small bugs in this image editor

  - by Alex

  Hi, I'm working on a website that will sell hand made jewelry and I'm finishing the image editor, but it's not behaving quite right. Basically, the user uploads an image which will be saved as a source and then it will be resized to fit the user's screen and saved as a temp. The user will then go to a screen that will allow them to crop the image and then save it to it's final versions. All of that works fine, except, the final versions have 3 bugs. First is some black horizontal line on the very bottom of the image. Second is an outline of sorts that follows the edges. I thought it was because I was reducing the quality, but even at 100% it still shows up... And lastly, I've noticed that the cropped image is always a couple of pixels lower than what I'm specifying... Anyway, I'm hoping someone whose got experience in editing images with C# can maybe take a look at the code and see where I might be going off the right path. Oh, by the way, this in an ASP.NET MVC application. Here's the code: using System; using System.Drawing; using System.Drawing.Drawing2D; using System.Drawing.Imaging; using System.IO; using System.Linq; using System.Web; namespace Website.Models.Providers { public class ImageProvider { private readonly ProductProvider ProductProvider = null; private readonly EncoderParameters HighQualityEncoder = new EncoderParameters(); private readonly ImageCodecInfo JpegCodecInfo = ImageCodecInfo.GetImageEncoders().Single( c => (c.MimeType == "image/jpeg")); private readonly string Path = HttpContext.Current.Server.MapPath("~/Resources/Images/Products"); private readonly short[][] Dimensions = new short[3][] { new short[2] { 640, 480 }, new short[2] { 240, 0 }, new short[2] { 80, 60 } }; ////////////////////////////////////////////////////////// // Constructor ////////////////////////////////////////// ////////////////////////////////////////////////////////// public ImageProvider( ProductProvider ProductProvider) { this.ProductProvider = ProductProvider; HighQualityEncoder.Param[0] = new EncoderParameter(Encoder.Quality, 100L); } ////////////////////////////////////////////////////////// // Crop ////////////////////////////////////////////// ////////////////////////////////////////////////////////// public void Crop( string FileName, Image Image, Crop Crop) { using (Bitmap Source = new Bitmap(Image)) { using (Bitmap Target = new Bitmap(Crop.Width, Crop.Height)) { using (Graphics Graphics = Graphics.FromImage(Target)) { Graphics.InterpolationMode = InterpolationMode.HighQualityBicubic; Graphics.SmoothingMode = SmoothingMode.HighQuality; Graphics.PixelOffsetMode = PixelOffsetMode.HighQuality; Graphics.CompositingQuality = CompositingQuality.HighQuality; Graphics.DrawImage(Source, new Rectangle(0, 0, Target.Width, Target.Height), new Rectangle(Crop.Left, Crop.Top, Crop.Width, Crop.Height), GraphicsUnit.Pixel); }; Target.Save(FileName, JpegCodecInfo, HighQualityEncoder); }; }; } ////////////////////////////////////////////////////////// // Crop & Resize ////////////////////////////////////// ////////////////////////////////////////////////////////// public void CropAndResize( Product Product, Crop Crop) { using (Image Source = Image.FromFile(String.Format("{0}/{1}.source", Path, Product.ProductId))) { using (Image Temp = Image.FromFile(String.Format("{0}/{1}.temp", Path, Product.ProductId))) { float Percent = ((float)Source.Width / (float)Temp.Width); short Width = (short)(Temp.Width * Percent); short Height = (short)(Temp.Height * Percent); Crop.Height = (short)(Crop.Height * Percent); Crop.Left = (short)(Crop.Left * Percent); Crop.Top = (short)(Crop.Top * Percent); Crop.Width = (short)(Crop.Width * Percent); Img Img = new Img(); this.ProductProvider.AddImageAndSave(Product, Img); this.Crop(String.Format("{0}/{1}.cropped", Path, Img.ImageId), Source, Crop); using (Image Cropped = Image.FromFile(String.Format("{0}/{1}.cropped", Path, Img.ImageId))) { this.Resize(this.Dimensions[0], String.Format("{0}/{1}-L.jpg", Path, Img.ImageId), Cropped, HighQualityEncoder); this.Resize(this.Dimensions[1], String.Format("{0}/{1}-T.jpg", Path, Img.ImageId), Cropped, HighQualityEncoder); this.Resize(this.Dimensions[2], String.Format("{0}/{1}-S.jpg", Path, Img.ImageId), Cropped, HighQualityEncoder); }; }; }; this.Purge(Product); } ////////////////////////////////////////////////////////// // Queue ////////////////////////////////////////////// ////////////////////////////////////////////////////////// public void QueueFor( Product Product, HttpPostedFileBase PostedFile) { using (Image Image = Image.FromStream(PostedFile.InputStream)) { this.Resize(new short[2] { 1152, 0 }, String.Format("{0}/{1}.temp", Path, Product.ProductId), Image, HighQualityEncoder); }; PostedFile.SaveAs(String.Format("{0}/{1}.source", Path, Product.ProductId)); } ////////////////////////////////////////////////////////// // Purge ////////////////////////////////////////////// ////////////////////////////////////////////////////////// private void Purge( Product Product) { string Source = String.Format("{0}/{1}.source", Path, Product.ProductId); string Temp = String.Format("{0}/{1}.temp", Path, Product.ProductId); if (File.Exists(Source)) { File.Delete(Source); }; if (File.Exists(Temp)) { File.Delete(Temp); }; foreach (Img Img in Product.Imgs) { string Cropped = String.Format("{0}/{1}.cropped", Path, Img.ImageId); if (File.Exists(Cropped)) { File.Delete(Cropped); }; }; } ////////////////////////////////////////////////////////// // Resize ////////////////////////////////////////////// ////////////////////////////////////////////////////////// public void Resize( short[] Dimensions, string FileName, Image Image, EncoderParameters EncoderParameters) { if (Dimensions[1] == 0) { Dimensions[1] = (short)(Image.Height / ((float)Image.Width / (float)Dimensions[0])); }; using (Bitmap Bitmap = new Bitmap(Dimensions[0], Dimensions[1])) { using (Graphics Graphics = Graphics.FromImage(Bitmap)) { Graphics.InterpolationMode = InterpolationMode.HighQualityBicubic; Graphics.SmoothingMode = SmoothingMode.HighQuality; Graphics.PixelOffsetMode = PixelOffsetMode.HighQuality; Graphics.CompositingQuality = CompositingQuality.HighQuality; Graphics.DrawImage(Image, 0, 0, Dimensions[0], Dimensions[1]); }; Bitmap.Save(FileName, JpegCodecInfo, EncoderParameters); }; } } } Here's one of the images this produces:

  Read the article

• "Phased" execution of functions in javascript

  - by FK82

  Hey there! This is my first post on stackoverflow, so please don't flame me too hard if I come across like a total nitwit or if I'm unable ot make myself perfectly clear. :-) Here's my problem: I'm trying to write a javascript function that "ties" two functions to another by checking the first one's completion and then executing the second one. The easy solution to this obviously would be to write a meta function that calls both functions within it's scope. However, if the first function is asynchronous (specifically an AJAX call) and the second function requires the first one's result data, that simply won't work. My idea for a solution was to give the first function a "flag", i.e. making it create a public property "this.trigger" (initialized as "0", set to "1" upon completion) once it is called; doing that should make it possible for another function to check the flag for its value ([0,1]). If the condition is met ("trigger == 1") the second function should get called. The following is an abstract example code that I have used for testing: <script type="text/javascript" > /**/function cllFnc(tgt) { //!! first function this.trigger = 0 ; var trigger = this.trigger ; var _tgt = document.getElementById(tgt) ; //!! changes the color of the target div to signalize the function's execution _tgt.style.background = '#66f' ; alert('Calling! ...') ; setTimeout(function() { //!! in place of an AJAX call, duration 5000ms trigger = 1 ; },5000) ; } /**/function rcvFnc(tgt) { //!! second function that should get called upon the first function's completion var _tgt = document.getElementById(tgt) ; //!! changes color of the target div to signalize the function's execution _tgt.style.background = '#f63' ; alert('... Someone picked up!') ; } /**/function callCheck(obj) { //alert(obj.trigger ) ; //!! correctly returns initial "0" if(obj.trigger == 1) { //!! here's the problem: trigger never receives change from function on success and thus function two never fires alert('trigger is one') ; return true ; } else if(obj.trigger == 0) { return false ; } } /**/function tieExc(fncA,fncB,prms) { if(fncA == 'cllFnc') { var objA = new cllFnc(prms) ; alert(typeof objA + '\n' + objA.trigger) ; //!! returns expected values "object" and "0" } //room for more case definitions var myItv = window.setInterval(function() { document.getElementById(prms).innerHTML = new Date() ; //!! displays date in target div to signalize the interval increments var myCallCheck = new callCheck(objA) ; if( myCallCheck == true ) { if(fncB == 'rcvFnc') { var objB = new rcvFnc(prms) ; } //room for more case definitions window.clearInterval(myItv) ; } else if( myCallCheck == false ) { return ; } },500) ; } </script> The HTML part for testing: <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN" "http://www.w3.org/TR/html4/strict.dtd > <html> <head> <script type="text/javascript" > <!-- see above --> </script> <title> Test page </title> </head> <body> <!-- !! testing area --> <div id='target' style='float:left ; height:6em ; width:8em ; padding:0.1em 0 0 0; font-size:5em ; text-align:center ; font-weight:bold ; color:#eee ; background:#fff;border:0.1em solid #555 ; -webkit-border-radius:0.5em ;' > Test Div </div> <div style="float:left;" > <input type="button" value="tie calls" onmousedown="tieExc('cllFnc','rcvFnc','target') ;" /> </div> <body> </html> I'm pretty sure that this is some issue with javascript scope as I have checked whether the trigger gets set to "1" correctly and it does. Very likely the "checkCall()" function does not receive the updated object but instead only checks its old instance which obviously never flags completion by setting "this.trigger" to "1". If so I don't know how to address that issue. Anyway, hope someone has an idea or experience with this particular kind of problem. Thanks for reading! FK

  Read the article

• Tip #13 java.io.File Surprises

  - by ByronNevins

  There is an assumption that I've seen in code many times that is totally wrong.  And this assumption can easily bite you.  The assumption is: File.getAbsolutePath and getAbsoluteFile return paths that are not relative.  Not true!  Sort of.  At least not in the way many people would assume.  All they do is make sure that the beginning of the path is absolute.  The rest of the path can be loaded with relative path elements.  What do you think the following code will print? public class Main {    public static void main(String[] args) {        try {            File f = new File("/temp/../temp/../temp/../");            File abs  = f.getAbsoluteFile();            File parent = abs.getParentFile();            System.out.println("Exists: " + f.exists());            System.out.println("Absolute Path: " + abs);            System.out.println("FileName: " + abs.getName());            System.out.printf("The Parent Directory of %s is %s\n", abs, parent);            System.out.printf("The CANONICAL Parent Directory of CANONICAL %s is %s\n",                        abs, abs.getCanonicalFile().getParent());            System.out.printf("The CANONICAL Parent Directory of ABSOLUTE %s is %s\n",                        abs, parent.getCanonicalFile());            System.out.println("Canonical Path: " + f.getCanonicalPath());        }        catch (IOException ex) {            System.out.println("Got an exception: " + ex);        }    }} Output: Exists: trueAbsolute Path: D:\temp\..\temp\..\temp\..FileName: ..The Parent Directory of D:\temp\..\temp\..\temp\.. is D:\temp\..\temp\..\tempThe CANONICAL Parent Directory of CANONICAL D:\temp\..\temp\..\temp\.. is nullThe CANONICAL Parent Directory of ABSOLUTE D:\temp\..\temp\..\temp\.. is D:\tempCanonical Path: D:\ Notice how it says that the parent of d:\ is d:\temp !!!The file, f, is really the root directory.  The parent is supposed to be null. I learned about this the hard way! getParentXXX simply hacks off the final item in the path. You can get totally unexpected results like the above. Easily. I filed a bug on this behavior a few years ago[1].   Recommendations: (1) Use getCanonical instead of getAbsolute.  There is a 1:1 mapping of files and canonical filenames.  I.e each file has one and only one canonical filename and it will definitely not have relative path elements in it.  There are an infinite number of absolute paths for each file. (2) To get the parent file for File f do the following instead of getParentFile: File parent = new File(f, ".."); [1] http://bt2ws.central.sun.com/CrPrint?id=6687287

  Read the article

• How to implement drag and drop in Flex Grid control?

  - by Bogdan

  I have a simple Grid control with some buttons that I want to be able to move around. The code below does work, but it takes a lot of effort to actually do the drag&drop and it is not clear where the drop will happen. I have to move the mouse around a lot to get to a state where the drop is not rejected. I would appreciate any suggestions on how to make this more "user friendly". <?xml version="1.0" encoding="utf-8"?> <mx:Application xmlns:mx="http://www.adobe.com/2006/mxml" layout="vertical" verticalAlign="middle" horizontalAlign="center" height="200" width="200"> <mx:Script> <![CDATA[ import mx.containers.GridItem; import mx.controls.Button; import mx.core.DragSource; import mx.events.*; import mx.managers.DragManager; private function dragInit(event:MouseEvent):void { if(event.buttonDown) { var button:Button = event.currentTarget as Button; var dragSource:DragSource = new DragSource(); dragSource.addData(button, 'button'); DragManager.doDrag(button, dragSource, event); } } private function dragEnter(event:DragEvent): void { var target:GridItem = event.currentTarget as GridItem; if (event.dragSource.hasFormat('button') && target.getChildren().length == 0) { DragManager.acceptDragDrop(target); DragManager.showFeedback(DragManager.MOVE); } } private function dragDrop(event:DragEvent): void { var target:GridItem = event.currentTarget as GridItem; var button:Button = event.dragSource.dataForFormat('button') as Button; target.addChild(button); } ]]> </mx:Script> <mx:Grid> <mx:GridRow width="100%" height="100%"> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> <mx:Button label="A" width="40" height="40" mouseMove="dragInit(event)"/> </mx:GridItem> </mx:GridRow> <mx:GridRow width="100%" height="100%"> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> <mx:Button label="B" width="40" height="40" mouseMove="dragInit(event)"/> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> </mx:GridRow> <mx:GridRow width="100%" height="100%"> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> <mx:Button label="C" width="40" height="40" mouseMove="dragInit(event)"/> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> <mx:GridItem width="44" height="44" dragEnter="dragEnter(event)" dragDrop="dragDrop(event)"> </mx:GridItem> </mx:GridRow> </mx:Grid> <mx:Style> GridItem { borderColor: #A09999; borderStyle: solid; borderThickness: 2; horizontal-align: center; vertical-align: center; } Grid { borderColor: #A09999; borderStyle: solid; borderThickness: 2; horizontalGap: 0; verticalGap: 0; horizontal-align: center; vertical-align: center; } </mx:Style> </mx:Application>

  Read the article

• Is Financial Inclusion an Obligation or an Opportunity for Banks?

  - by tushar.chitra

  Why should banks care about financial inclusion? First, the statistics, I think this will set the tone for this blog post. There are close to 2.5 billion people who are excluded from the banking stream and out of this, 2.2 billion people are from the continents of Africa, Latin America and Asia (McKinsey on Society: Global Financial Inclusion). However, this is not just a third-world phenomenon. According to Federal Deposit Insurance Corp (FDIC), in the US, post 2008 financial crisis, one family out of five has either opted out of the banking system or has been moved out (American Banker). Moving this huge unbanked population into mainstream banking is both an opportunity and a challenge for banks. An obvious opportunity is the significant untapped customer base that banks can target, so is the positive brand equity a bank can build by fulfilling its social responsibilities. Also, as banks target the cost-conscious unbanked customer, they will be forced to look at ways to offer cost-effective products and services, necessitating technology upgrades and innovations. However, cost is not the only hurdle in increasing the adoption of banking services. The potential users need to be convinced of the benefits of banking and banks will also face stiff competition from unorganized players. Finally, the banks will have to believe in the viability of this business opportunity, and not treat financial inclusion as an obligation. In what ways can banks target the unbanked For financial inclusion to be a success, banks should adopt innovative business models to develop products that address the stated and unstated needs of the unbanked population and also design delivery channels that are cost effective and viable in the long run. Through business correspondents and facilitators In rural and remote areas, one of the major hurdles in increasing banking penetration is connectivity and accessibility to banking services, which makes last mile inclusion a daunting challenge. To address this, banks can avail the services of business correspondents or facilitators. This model allows banks to establish greater connectivity through a trusted and reliable intermediary. In India, for instance, banks can leverage the local Kirana stores (the mom & pop stores) to service rural and remote areas. With a supportive nudge from the central bank, the commercial banks can enlist these shop owners as business correspondents to increase their reach. Since these neighborhood stores are acquainted with the local population, they can help banks manage the KYC norms, besides serving as a conduit for remittance. Banks also have an opportunity over a period of time to cross-sell other financial products such as micro insurance, mutual funds and pension products through these correspondents. To exercise greater operational control over the business correspondents, banks can also adopt a combination of branch and business correspondent models to deliver financial inclusion. Through mobile devices According to a 2012 world bank report on financial inclusion, out of a world population of 7 billion, over 5 billion or 70% have mobile phones and only 2 billion or 30% have a bank account. What this means for banks is that there is scope for them to leverage this phenomenal growth in mobile usage to serve the unbanked population. Banks can use mobile technology to service the basic banking requirements of their customers with no frills accounts, effectively bringing down the cost per transaction. As I had discussed in my earlier post on mobile payments, though non-traditional players have taken the lead in P2P mobile payments, banks still hold an edge in terms of infrastructure and reliability. Through crowd-funding According to the Crowdfunding Industry Report by Massolution, the global crowdfunding industry raised $2.7 billion in 2012, and is projected to grow to $5.1 billion in 2013. With credit policies becoming tighter and banks becoming more circumspect in terms of loan disbursals, crowdfunding has emerged as an alternative channel for lending. Typically, these initiatives target the unbanked population by offering small loans that are unviable for larger banks. Though a significant proportion of crowdfunding initiatives globally are run by non-banking institutions, banks are also venturing into this space. The next step towards inclusive finance Banks by themselves cannot make financial inclusion a success. There is a need for a whole ecosystem that is supportive of this mission. The policy makers, that include the regulators and government bodies, must be in sync, the IT solution providers must put on their thinking caps to come out with innovative products and solutions, communication channels such as internet and mobile need to expand their reach, and the media and the public need to play an active part. The other challenge for financial inclusion is from the banks themselves. While it is true that financial inclusion will unleash a hitherto hugely untapped market, the normal banking model may be found wanting because of issues such as flexibility, convenience and reliability. The business will be viable only when there is a focus on increasing the usage of existing infrastructure and that is possible when the banks can offer the entire range of products and services to the large number of users of essential banking services. Apart from these challenges, banks will also have to quickly master and replicate the business model to extend their reach to the remotest regions in their respective geographies. They will need to ensure that the transactions deliver a viable business benefit to the bank. For tapping cross-sell opportunities, banks will have to quickly roll-out customized and segment-specific products. The bank staff should be brought in sync with the business plan by convincing them of the viability of the business model and the need for a business correspondent delivery model. Banks, in collaboration with the government and NGOs, will have to run an extensive financial literacy program to educate the unbanked about the benefits of banking. Finally, with the growing importance of retail banking and with many unconventional players eyeing the opportunity in payments and other lucrative areas of banking, banks need to understand the importance of micro and small branches. These micro and small branches can help banks increase their presence without a huge cost burden, provide bankers an opportunity to cross sell micro products and offer a window of opportunity for the large non-banked population to transact without any interference from intermediaries. These branches can also help diminish the role of the unorganized financial sector, such as local moneylenders and unregistered credit societies. This will also help banks build a brand awareness and loyalty among the users, which by itself has a cascading effect on the business operations, especially among the rural and un-banked centers. In conclusion, with the increasingly competitive banking sector facing frequent slowdowns and downturns, the unbanked population presents a huge opportunity for banks to enhance their customer base and fulfill their social responsibility.

  Read the article

• MSDN "pseudoframe"

  - by bobobobo

  So, I'm trying to replicate MSDN "pseudoframes" here. Their pages are laid out like they're using an old-school frameset, but inspecting their elements with firebug reveals they've done this with purely div's. Here's my attempt at it. Its not perfect though, it only works in Chrome and Firefox, it has this weird highlight select behavior that I don't like, any takers? <!doctype html> <html> <head> <title>msdn "pseudoframe"</title> <style> body { background-color: #aaa; margin: 0; padding: 0; } div#pseudoframe, div#main { border: solid 1px black; background-color: #fff; } div#pseudoframe { position: absolute; left: 0; width: 180px; height: 100%; overflow-x: auto; overflow-y: none; } div#sizeMod { background-color: #a0a; position: absolute; left: 220px; height: 100%; cursor: e-resize; } div#main { font-weight: bold; font-size: 2em; padding: 24px; margin-left: 224px; } </style> <script type="text/javascript"> function initialize() { // get the pseudoframe and attach an event to the mouse flyover. var pf = document.getElementById('pseudoframe'); var main = document.getElementById('main'); var resize = document.getElementById( 'sizeMod' ); pf['onmouseover'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; // are we within 5 px of the border? if we are, // change the mouse cursor to resize. }; pf['onscroll'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; var sizeMod = document.getElementById( 'sizeMod' ); //alert( el.scrollLeft ); sizeMod.style.right = '-' + (el.scrollLeft) + 'px'; //alert( sizeMod.style.right ); // are we within 5 px of the border? if we are, // change the mouse cursor to resize. }; resize['onmousedown'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; window.lockResize = true; }; window['onmouseup'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; window.lockResize = false; //release on any mouse up event //alert('unlocked'); }; window['onmousemove'] = function( event ) { event = event || window.event; var el = event.srcElement || event.target ; if( window.lockResize == true ) { // resize. get client x and y. var x = event.clientX; var y = event.clientY; pf.style.width = x + 'px'; resize.style.left = x + 'px'; main.style.marginLeft = x + 'px'; //alert( pf.style.width ); event.stopPropagation(); event.preventDefault(); return false; } }; } </script> </head> <body onload=" initialize(); "> <div id="pseudoframe"> <ul> <li>Code</li> <li>MICROSOFT CODE <ul> <li>WINDOWS XP SOURCE</li> <li>WINDOWS VISTA SOURCE</li> <li>WINDOWS 7 SOURCE</li> <li>WINDOWS 8 SOURCE</li> </ul> </li> <li>DOWNLOAD ALL MICROSOFT CODE EVER WRITTEN</li> <li>DOWNLOAD ALL MAC OS CODE EVER WRITTEN</li> <li>DOWNLOAD ALL AMIGA GAME CONSOLE CODE</li> <li>DOWNLOAD ALL CODE EVER WRITTEN PERIOD</li> </ul> </div> <div id="sizeMod">&nbsp;&nbsp;</div> <div id="main"> lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe lorem ipsum microsoft pseudoframe </div> </body> </html>

  Read the article

• How to move MOSS 2007 to another SharePoint Farm

  - by DipeshBhanani

  It was time of my first onsite client assignment on SharePoint. Client had one server production environment. They wanted to upgrade the topology with completely new SharePoint Farm of three servers. So, the task was to move whole MOSS 2007 stuff to the new server environment without impacting data. The last three words “… without impacting data…” were actually putting pressure on my head. Moreover SSP was required to move because additional information has been added for users apart from AD import.   I thought I had to do only backup and restore. It appeared pretty easy at first thought. Just because of these three damn scary words, I thought to check out on internet for guidance related to this scenario. I couldn’t get anything except general guidance of moving server on Microsoft TechNet site. I promised myself for starting blogs with this post if I would be successful in this task. Well, I took long time to write this but finally made it. I hope it will be useful to all guys looking for SharePoint server movement.   Before beginning restoration, make sure that, there is no difference in versions of SharePoint at source and destination server. Also check whether the state of SharePoint Installation at the time of backup and restore is same or not. (E.g. SharePoint related service packs and patches if any)   The main tasks of the server movement are as follow:   1.        Backup all the databases 2.        Install and configure SharePoint on new environment 3.        Deploy all solutions (WSP Files) globally to destination server- for installing features attached to the solutions 4.        Install all the custom features 5.        Deploy/Copy custom pages/files which are added to the “12Hive” folder later 6.        Restore SSP 7.        Restore My Site 8.        Restore other web application   Tasks 3 to 5 are for making sure that we have configured the environment well enough for the web application to be restored successfully. The main and complex task was restoring SSP. I have started restoring SSP through Central Admin. After a while, the restoration status was updated to “unsuccessful”. “Damn it, what went wrong?” I thought looking at the error detail down the page. I couldn’t remember the error message but I had corrected and restored it again.   Actually once you fail restoring SSP, until and unless you don’t clean all related stuff well, your restoration will be failed again and again. I wanted to find the actual reason. So cleaned, restored, cleaned, restored… I had tried almost 5-6 times and finally, I succeeded. I had realized how pleasant it is, to see the word “Successful” on the screen. Without wasting your much time to read, let me write all the detailed steps of restoring SSP:   1.        Delete the SSP through following STSADM command. stsadm -o deletessp -title <SSP name> -deletedatabases -force e.g.: stsadm -o deletessp -title SharedServices1 -deletedatabases –force 2.        Check and delete the web application associated with SSP if it exists. 3.        Remove Link from Check and remove “Alternate Access Mapping” associated with SSP if it exists. 4.        Check and delete IIS site as well as application pool associated with SSP if it exists. 5.        Stop following services: ·         Office SharePoint Server Search ·         Windows SharePoint Services Search ·         Windows SharePoint Services Help Search   6.        Delete all the databases associated/related to SSP from SQL Server. 7.        Reset IIS. 8.        Start again following services: ·         Office SharePoint Server Search ·         Windows SharePoint Services Search ·         Windows SharePoint Services Help Search   9.        Restore the new SSP.   After the SSP restoration, all other stuffs had completed very smoothly without any more issues. I did few modifications to sites for change of server name and finally, the new environment was ready.

  Read the article

• Oracle Enterprise Manager Ops Center : Using Operational Profiles to Install Packages and other Content

  - by LeonShaner

  Oracle Enterprise Manager Ops Center provides numerous ways to deploy content, such as through OS Update Profiles, or as part of an OS Provisioning plan or combinations of those and other "Install Software" capabilities of Deployment Plans.  This short "how-to" blog will highlight an alternative way to deploy content using Operational Profiles. Usually we think of Operational Profiles as a way to execute a simple "one-time" script to perform a basic system administration function, which can optionally be based on user input; however, Operational Profiles can be much more powerful than that.  There is often more to performing an action than merely running a script -- sometimes configuration files, packages, binaries, and other scripts, etc. are needed to perform the action, and sometimes the user would like to leave such content on the system for later use. For shell scripts and other content written to be generic enough to work on any flavor of UNIX, converting the same scripts and configuration files into Solaris 10 SVR4 package, Solaris 11 IPS package, and/or a Linux RPM's might be seen as three times the work, for little appreciable gain.   That is where using an Operational Profile to deploy simple scripts and other generic content can be very helpful.  The approach is so powerful, that pretty much any kind of content can be deployed using an Operational Profile, provided the files involved are not overly large, and it is not necessary to convert the content into UNIX variant-specific formats. The basic formula for deploying content with an Operational Profile is as follows: Begin with a traditional script header, which is a UNIX shell script that will be responsible for decoding and extracting content, copying files into the right places, and executing any other scripts and commands needed to install and configure that content. Include steps to make the script platform-aware, to do the right thing for a given UNIX variant, or a "sorry" message if the operator has somehow tried to run the Operational Profile on a system where the script is not designed to run.  Ops Center can constrain execution by target type, so such checks at this level are an added safeguard, but also useful with the generic target type of "Operating System" where the admin wants the script to "do the right thing," whatever the UNIX variant. Include helpful output to show script progress, and any other informational messages that can help the admin determine what has gone wrong in the case of a problem in script execution.  Such messages will be shown in the job execution log. Include necessary "clean up" steps for normal and error exit conditions Set non-zero exit codes when appropriate -- a non-zero exit code will cause an Operational Profile job to be marked failed, which is the admin's cue to look into the job details for diagnostic messages in the output from the script. That first bullet deserves some explanation.  If Operational Profiles are usually simple "one-time" scripts and binary content is not allowed, then how does the actual content, packages, binaries, and other scripts get delivered along with the script?  More specifically, how does one include such content without needing to first create some kind of traditional package?   All that is required is to simply encode the content and append it to the end of the Operational Profile.  The header portion of the Operational Profile will need to contain the commands to decode the embedded content that has been appended to the bottom of the script.  The header code can do whatever else is needed, and finally clean up any intermediate files that were created during the decoding and extraction of the content. One way to encode binary and other content for inclusion in a script is to use the "uuencode" utility to convert the content into simple base64 ASCII text -- a form that is suitable to be appended to an Operational Profile.   The behavior of the "uudecode" utility is such that it will skip over any parts of the input that do not fit the uuencoded "begin" and "end" clauses.  For that reason, your header script will be skipped over, and uudecode will find your embedded content, that you will uuencode and paste at the end of the Operational Profile.  You can have as many "begin" / "end" clauses as you need -- just separate each embedded file by an empty line between "begin" and "end" clauses. Example:  Install SUNWsneep and set the system serial number Script:  deploySUNWsneep.sh ( <- right-click / save to download) Highlights: #!/bin/sh # Required variables: OC_SERIAL="$OC_SERIAL" # The user-supplied serial number for the asset ... Above is a good practice, showing right up front what kind of input the Operational Profile will require.   The right-hand side where $OC_SERIAL appears in this example will be filled in by Ops Center based on the user input at deployment time. The script goes on to restrict the use of the program to the intended OS type (Solaris 10 or older, in this example, but other content might be suitable for Solaris 11, or Linux -- it depends on the content and the script that will handle it). A temporary working directory is created, and then we have the command that decodes the embedded content from "self" which in scripting terms is $0 (a variable that expands to the name of the currently executing script): # Pass myself through uudecode, which will extract content to the current dir uudecode $0 At that point, whatever content was appended in uuencoded form at the end of the script has been written out to the current directory.  In this example that yields a file, SUNWsneep.7.0.zip, which the rest of the script proceeds to unzip, and pkgadd, followed by running "/opt/SUNWsneep/bin/sneep -s $OC_SERIAL" which is the command that stores the system serial for future use by other programs such as Explorer.   Don't get hung up on the example having used a pkgadd command.  The content started as a zip file and it could have been a tar.gz, or any other file.  This approach simply decodes the file.  The header portion of the script has to make sense of the file and do the right thing (e.g. it's up to you). The script goes on to clean up after itself, whether or not the above was successful.  Errors are echo'd by the script and a non-zero exit code is set where appropriate. Second to last, we have: # just in case, exit explicitly, so that uuencoded content will not cause error OPCleanUP exit # The rest of the script is ignored, except by uudecode # # UUencoded content follows # # e.g. for each file needed, #  $ uuencode -m {source} {source} > {target}.uu5 # then paste the {target}.uu5 files below # they will be extracted into the workding dir at $TDIR # The commentary above also describes how to encode the content. Finally we have the uuencoded content: begin-base64 444 SUNWsneep.7.0.zip UEsDBBQAAAAIAPsRy0Di3vnukAAAAMcAAAAKABUAcmVhZG1lLnR4dFVUCQADOqnVT7up ... VXgAAFBLBQYAAAAAAgACAJEAAADTNwEAAAA= ==== That last line of "====" is the base64 uuencode equivalent of a blank line, followed by "end" and as mentioned you can have as many begin/end clauses as you need.  Just separate each embedded file by a blank line after each ==== and before each begin-base64. Deploying the example Operational Profile looks like this (where I have pasted the system serial number into the required field): The job succeeded, but here is an example of the kind of diagnostic messages that the example script produces, and how Ops Center displays them in the job details: This same general approach could be used to deploy Explorer, and other useful utilities and scripts. Please let us know what you think?  Until next time...\Leon-- Leon Shaner | Senior IT/Product ArchitectSystems Management | Ops Center Engineering @ Oracle The views expressed on this [blog; Web site] are my own and do not necessarily reflect the views of Oracle. For more information, please go to Oracle Enterprise Manager  web page or  follow us at :  Twitter | Facebook | YouTube | Linkedin | Newsletter

  Read the article

• Repopulating a collection of Backbone forms with previously submitted data

  - by Brian Wheat

  I am able to post my forms to my database and I have stepped through my back end function to check and see that my Get function is returning the same data I submitted. However I am having trouble understanding how to have this data rendered upon visiting the page again. What am I missing? The intention is to be able to create, read, update, or delete (CRUD) some personal contact data for a variable collection of individuals. //Model var PersonItem = Backbone.Model.extend({ url: "/Application/PersonList", idAttribute: "PersonId", schema: { Title: { type: 'Select', options: function (callback) { $.getJSON("/Application/GetTitles/").done(callback); } }, Salutation: { type: 'Select', options: ['Mr.', 'Mrs.', 'Ms.', 'Dr.'] }, FirstName: 'Text', LastName: 'Text', MiddleName: 'Text', NameSuffix: 'Text', StreetAddress: 'Text', City: 'Text', State: { type: 'Select', options: function (callback) { $.getJSON("/Application/GetStates/").done(callback); } }, ZipCode: 'Text', PhoneNumber: 'Text', DateOfBirth: 'Date', } }); Backbone.Form.setTemplates(template, PersonItem); //Collection var PersonList = Backbone.Collection.extend({ model: PersonItem , url: "/Application/PersonList" }); //Views var PersonItemView = Backbone.Form.extend({ tagName: "li", events: { 'click button.delete': 'remove', 'change input': 'change' }, initialize: function (options) { console.log("ItemView init"); PersonItemView.__super__.initialize.call(this, options); _.bindAll(this, 'render', 'remove'); console.log("ItemView set attr = " + options); }, render: function () { PersonItemView.__super__.render.call(this); $('fieldset', this.el).append("<button class=\"delete\" style=\"float: right;\">Delete</button>"); return this; }, change: function (event) { var target = event.target; console.log('changing ' + target.id + ' from: ' + target.defaultValue + ' to: ' + target.value); }, remove: function () { console.log("delete button pressed"); this.model.destroy({ success: function () { alert('person deleted successfully'); } }); return false; } }); var PersonListView = Backbone.View.extend({ el: $("#application_fieldset"), events: { 'click button#add': 'addPerson', 'click button#save': 'save2db' }, initialize: function () { console.log("PersonListView Constructor"); _.bindAll(this, 'render', 'addPerson', 'appendItem', 'save'); this.collection = new PersonList(); this.collection.bind('add', this.appendItem); //this.collection.fetch(); this.collection.add([new PersonItem()]); console.log("collection length = " + this.collection.length); }, render: function () { var self = this; console.log(this.collection.models); $(this.el).append("<button id='add'>Add Person</button>"); $(this.el).append("<button id='save'>Save</button>"); $(this.el).append("<fieldset><legend>Contact</legend><ul id=\"anchor_list\"></ul>"); _(this.collection.models).each(function (item) { self.appendItem(item); }, this); $(this.el).append("</fieldset>"); }, addPerson: function () { console.log("addPerson clicked"); var item = new PersonItem(); this.collection.add(item); }, appendItem: function (item) { var itemView = new PersonItemView({ model: item }); $('#anchor_list', this.el).append(itemView.render().el); }, save2db: function () { var self = this; console.log("PersonListView save"); _(this.collection.models).each(function (item) { console.log("item = " + item.toJSON()); var cid = item.cid; console.log("item.set"); item.set({ Title: $('#' + cid + '_Title').val(), Salutation: $('#' + cid + '_Salutation').val(), FirstName: $('#' + cid + '_FirstName').val(), LastName: $('#' + cid + '_LastName').val(), MiddleName: $('#' + cid + '_MiddleName').val(), NameSuffix: $('#' + cid + '_NameSuffix').val(), StreetAddress: $('#' + cid + '_StreetAddress').val(), City: $('#' + cid + '_City').val(), State: $('#' + cid + '_State').val(), ZipCode: $('#' + cid + '_ZipCode').val(), PhoneNumber: $('#' + cid + '_PhoneNumber').val(), DateOfBirth: $('#' + cid + '_DateOfBirth').find('input').val() }); if (item.isNew()) { console.log("item.isNew"); self.collection.create(item); } else { console.log("!item.isNew"); item.save(); } }); return false; } }); var personList = new PersonList(); var view = new PersonListView({ collection: personList }); personList.fetch({ success: function () { $("#application_fieldset").append(view.render()); } });

  Read the article

• action script on behalf of xml problem.

  - by sabuj

  import fl.transitions.easing.; import fl.transitions.; var xml:XML; var xmlList:XMLList; var xmlLoader:URLLoader = new URLLoader (); var productLoader:URLLoader = new URLLoader(); var imageLoader:Loader; var bigImage:Loader = new Loader(); var imageText:TextField = new TextField(); xmlLoader.load(new URLRequest("http://localhost/shopmajik/flash/shopdata")); xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded); function xmlLoaded(e:Event):void { xml=new XML(e.target.data); XML.ignoreWhitespace = true; xmlList = xml.children(); trace(xmlList); imageLoader = new Loader(); imageLoader.load(new URLRequest(xmlList.elements("shopbanner").attribute("src"))); imageLoader.x = -220; imageLoader.y = -187; addChild(imageLoader); } imgLoader.alpha = 0; textLoader.alpha = 0; imgLoader2.alpha = 0; imgLoader3.alpha = 0; imgLoader4.alpha = 0; imgLoader5.alpha = 0; //Item button is working here... btnProduct.addEventListener(MouseEvent.CLICK, showProduct); function showProduct(event:Event):void { imgLoader.alpha = 0; textLoader.alpha = 0; imgLoader3.alpha = 0; imgLoader4.alpha = 0; imgLoader5.alpha = 0; imgLoader2.alpha = 0; var productLoader:URLLoader = new URLLoader(); productLoader.load(new URLRequest("http://localhost/shopmajik/flash/productdata")); productLoader.addEventListener(Event.COMPLETE , onProductLoad); function onProductLoad(e:Event):void { var productLoader:XML = new XML(e.target.data); xmlList = productLoader.children(); textLoader.text = xmlList.elements("productname"); textLoader.alpha =0; } } //Item button is working here... btnItem.addEventListener(MouseEvent.CLICK, showItem); //btnItem.addEventListener(Event:event, showItem); function showItem(event:Event):void { imgLoader.alpha =0; textLoader.alpha=0; imgLoader3.alpha=0; imgLoader4.alpha=0; imgLoader5.alpha=0; imgLoader2.alpha=0; var itemLoader:URLLoader = new URLLoader(); itemLoader.load(new URLRequest("http://localhost/shopmajik/flash/productdata")); itemLoader.addEventListener(Event.COMPLETE , onItemLoad); function onItemLoad(e:Event):void { var myLoader:XML = new XML(e.target.data); xmlList = myLoader.children(); textLoader.text = xmlList.elements("productname"); textLoader.alpha =0; } } //Details button workings... btnDetails.addEventListener(MouseEvent.CLICK, showDetails); function showDetails(event:Event):void { imgLoader.alpha=0; textLoader.alpha=0; imgLoader3.alpha=0; imgLoader4.alpha=0; imgLoader5.alpha=0; imgLoader2.alpha=0; var detailsLoader:URLLoader = new URLLoader(); detailsLoader.load(new URLRequest("http://localhost/shopmajik/flash/productdata")); detailsLoader.addEventListener(Event.COMPLETE , onDetailsLoad); function onDetailsLoad(e:Event):void { var myLoader:XML = new XML(e.target.data); xmlList = myLoader.children(); textLoader.text = xmlList.elements("productdescription"); textLoader.alpha =0; } } btnImages.addEventListener(MouseEvent.CLICK, showImages); function showImages(event:Event):void { textLoader.alpha=0; textLoader.text=""; imgLoader2.alpha= 1; var imagesLoader:URLLoader = new URLLoader(); imagesLoader.load(new URLRequest("http://localhost/shopmajik/flash/productdata")); imagesLoader.addEventListener(Event.COMPLETE , onImagesLoad); function onImagesLoad(e:Event):void { var xml:XML = new XML(e.target.data); xmlList = xml.children(); imgLoader2.x=-155; imgLoader2.y= -50; imgLoader2.load(new URLRequest(xmlList.elements("productimage").attribute("src"))); } } btnPay.addEventListener(MouseEvent.CLICK , showPage); function showPage(e:MouseEvent):void { navigateToURL(new URLRequest("https://www.paypal.com/")); } This is the source code. It works very fine in locally. But in server it shows the bellow error ---- TypeError: Error #1088: The markup in the document following the root element must be well-formed. at bgfin_fla::Main_1/xmlLoaded() at flash.events::EventDispatcher/dispatchEventFunction() at flash.events::EventDispatcher/dispatchEvent() at flash.net::URLLoader/onComplete() someone please show me the path. How i should go over this?

  Read the article

• Maven : Is it possible to override the configuration of a plugin already defined for a profile in a parent POM

  - by Guillaume Cernier

  In a POM parent file of my project, I have such a profile defining some configurations useful for this project (so that I can't get rid of this parent POM) : <profile> <id>wls7</id> ... <build> <plugins> <!-- use java 1.4 --> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-compiler-plugin</artifactId> <configuration> <fork>true</fork> <source>1.4</source> <target>1.4</target> <meminitial>128m</meminitial> <maxmem>1024m</maxmem> <executable>%${jdk14.executable}</executable> </configuration> </plugin> </plugins> </build> ... </profile> But in my project I just would like to override the configuration of the maven-compiler-plugin in order to use jdk5 instead of jdk4 for compiling test-classes. That's why I did this section in the POM of my project : <profiles> <profile> <id>wls7</id> <activation> <property> <name>jdk</name> <value>4</value> </property> </activation> <build> <directory>target-1.4</directory> <plugins> <plugin> <groupId>org.apache.maven.plugins</groupId> <artifactId>maven-compiler-plugin</artifactId> <executions> <execution> <id>my-testCompile</id> <phase>test-compile</phase> <goals> <goal>testCompile</goal> </goals> <configuration> <fork>true</fork> <executable>${jdk15.executable}</executable> <compilerVersion>1.5</compilerVersion> <source>1.5</source> <target>1.5</target> <verbose>true</verbose> </configuration> </execution> </executions> </plugin> </plugins> </build> </profile> ... </profiles> and it's not working ... I even tried to override the configuration in regular plugin sections of my POM (I mean, not for a specific profile but for my whole POM). What could be the problem ? To clarify some of my requirements : I don't want to get rid of the parent POM and the profile (wls7) defined inside it (since I need many and many properties, configurations, ...) and that is not the process in my company. A solution based on duplicating the parent POM and/or the profile defined inside it is not a good one. Since if the responsible of the parent POM change something, I would have to report it in mine. It's just an inheritance matter (extend or override a profile, a configuration from an upper-level POM) so I think it should be possible with maven2.

  Read the article

• action script xml parsing failed.

  - by sabuj

  TypeError: Error #1088: The markup in the document following the root element must be well-formed. action script read xml from a codeigniter controller function but it shows the upper error. what should be done. bellow is my full coding structure - import fl.transitions.easing.; import fl.transitions.; var xml:XML; var xmlList:XMLList; var xmlLoader:URLLoader = new URLLoader (); var productLoader:URLLoader = new URLLoader(); var imageLoader:Loader; var bigImage:Loader = new Loader(); var imageText:TextField = new TextField(); xmlLoader.load(new URLRequest("http://outshinebd.com/shopmajik/flash/shopdata")); xmlLoader.addEventListener(Event.COMPLETE, xmlLoaded); function xmlLoaded(e:Event):void { xml=new XML(e.target.data); xmlList = xml.children(); imageLoader = new Loader(); imageLoader.load(new URLRequest(xmlList.elements("shopbanner").attribute("src"))); imageLoader.x = -220; imageLoader.y = -187; addChild(imageLoader); } imgLoader.alpha = 0; textLoader.alpha = 0; imgLoader2.alpha = 0; imgLoader3.alpha = 0; imgLoader4.alpha = 0; imgLoader5.alpha = 0; //Item button is working here... btnProduct.addEventListener(MouseEvent.CLICK, showProduct); function showProduct(event:Event):void { imgLoader.alpha = 0; textLoader.alpha = 0; imgLoader3.alpha = 0; imgLoader4.alpha = 0; imgLoader5.alpha = 0; imgLoader2.alpha = 0; var productLoader:URLLoader = new URLLoader(); productLoader.load(new URLRequest("http://outshinebd.com/shopmajik/flash/productdata")); productLoader.addEventListener(Event.COMPLETE , onProductLoad); function onProductLoad(e:Event):void { var productLoader:XML = new XML(e.target.data); xmlList = productLoader.children(); textLoader.text = xmlList.elements("productname"); textLoader.alpha =0; } } //Item button is working here... btnItem.addEventListener(MouseEvent.CLICK, showItem); //btnItem.addEventListener(Event:event, showItem); function showItem(event:Event):void { imgLoader.alpha =0; textLoader.alpha=0; imgLoader3.alpha=0; imgLoader4.alpha=0; imgLoader5.alpha=0; imgLoader2.alpha=0; var itemLoader:URLLoader = new URLLoader(); itemLoader.load(new URLRequest("http://outshinebd.com/shopmajik/flash/productdata")); itemLoader.addEventListener(Event.COMPLETE , onItemLoad); function onItemLoad(e:Event):void { var myLoader:XML = new XML(e.target.data); xmlList = myLoader.children(); textLoader.text = xmlList.elements("productname"); textLoader.alpha =0; } } //Details button workings... btnDetails.addEventListener(MouseEvent.CLICK, showDetails); function showDetails(event:Event):void { imgLoader.alpha=0; textLoader.alpha=0; imgLoader3.alpha=0; imgLoader4.alpha=0; imgLoader5.alpha=0; imgLoader2.alpha=0; var detailsLoader:URLLoader = new URLLoader(); detailsLoader.load(new URLRequest("http://outshinebd.com/shopmajik/flash/productdata")); detailsLoader.addEventListener(Event.COMPLETE , onDetailsLoad); function onDetailsLoad(e:Event):void { var myLoader:XML = new XML(e.target.data); xmlList = myLoader.children(); textLoader.text = xmlList.elements("productdescription"); textLoader.alpha =0; } } btnImages.addEventListener(MouseEvent.CLICK, showImages); function showImages(event:Event):void { textLoader.alpha=0; textLoader.text=""; imgLoader2.alpha= 1; var imagesLoader:URLLoader = new URLLoader(); imagesLoader.load(new URLRequest("http://outshinebd.com/shopmajik/flash/productdata")); imagesLoader.addEventListener(Event.COMPLETE , onImagesLoad); function onImagesLoad(e:Event):void { var xml:XML = new XML(e.target.data); xmlList = xml.children(); imgLoader2.x=-155; imgLoader2.y= -50; imgLoader2.load(new URLRequest(xmlList.elements("productimage").attribute("src"))); } } btnPay.addEventListener(MouseEvent.CLICK , showPage); function showPage(e:MouseEvent):void { navigateToURL(new URLRequest("https://www.paypal.com/")); }

  Read the article

• Executing legacy MSBuild scripts in TFS 2010 Build

  - by Jakob Ehn

  When upgrading from TFS 2008 to TFS 2010, all builds are “upgraded” in the sense that a build definition with the same name is created, and it uses the UpgradeTemplate  build process template to execute the build. This template basically just runs MSBuild on the existing TFSBuild.proj file. The build definition contains a property called ConfigurationFolderPath that points to the TFSBuild.proj file. So, existing builds will run just fine after upgrade. But what if you want to use the new workflow functionality in TFS 2010 Build, but still have a lot of MSBuild scripts that maybe call custom MSBuild tasks that you don’t have the time to rewrite? Then one option is to keep these MSBuild scrips and call them from a TFS 2010 Build workflow. This can be done using the MSBuild workflow activity that is avaiable in the toolbox in the Team Foundation Build Activities section: This activity wraps the call to MSBuild.exe and has the following parameters: Most of these properties are only relevant when actually compiling projects, for example C# project files. When calling custom MSBuild project files, you should focus on these properties: Property Meaning Example CommandLineArguments Use this to send in/override MSBuild properties in your project “/p:MyProperty=SomeValue” or MSBuildArguments (this will let you define the arguments in the build definition or when queuing the build) LogFile Name of the log file where MSbuild will log the output “MyBuild.log” LogFileDropLocation Location of the log file BuildDetail.DropLocation + “\log” Project The project to execute SourcesDirectory + “\BuildExtensions.targets” ResponseFile The name of the MSBuild response file SourcesDirectory + “\BuildExtensions.rsp” Targets The target(s) to execute New String() {“Target1”, “Target2”} Verbosity Logging verbosity Microsoft.TeamFoundation.Build.Workflow.BuildVerbosity.Normal Integrating with Team Build   If your MSBuild scripts tries to use Team Build tasks, they will most likely fail with the above approach. For example, the following MSBuild project file tries to add a build step using the BuildStep task:   <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildExtensionsPath)\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets" /> <Target Name="MyTarget"> <BuildStep TeamFoundationServerUrl="$(TeamFoundationServerUrl)" BuildUri="$(BuildUri)" Name="MyBuildStep" Message="My build step executed" Status="Succeeded"></BuildStep> </Target> </Project> When executing this file using the MSBuild activity, calling the MyTarget, it will fail with the following message: The "Microsoft.TeamFoundation.Build.Tasks.BuildStep" task could not be loaded from the assembly \PrivateAssemblies\Microsoft.TeamFoundation.Build.ProcessComponents.dll. Could not load file or assembly 'file:///D:\PrivateAssemblies\Microsoft.TeamFoundation.Build.ProcessComponents.dll' or one of its dependencies. The system cannot find the file specified. Confirm that the <UsingTask> declaration is correct, that the assembly and all its dependencies are available, and that the task contains a public class that implements Microsoft.Build.Framework.ITask. You can see that the path to the ProcessComponents.dll is incomplete. This is because in the Microsoft.TeamFoundation.Build.targets file the task is referenced using the $(TeamBuildRegPath) property. Also note that the task needs the TeamFounationServerUrl and BuildUri properties. One solution here is to pass these properties in using the Command Line Arguments parameter:   Here we pass in the parameters with the corresponding values from the curent build. The build log shows that the build step has in fact been inserted:   The problem as you probably spted is that the build step is insert at the top of the build log, instead of next to the MSBuild activity call. This is because we are using a legacy team build task (BuildStep), and that is how these are handled in TFS 2010. You can see the same behaviour when running builds that are using the UpgradeTemplate, that cutom build steps shows up at the top of the build log.

  Read the article

• Asp.NET ReportViewer “report execution has expired or cannot be found” error when using session state service or SQL Server session state

  - by dotneteer

  We encountered an error like: ReportServerException: The report execution x5pl2245iwvvq055khsxzlj5 has expired or cannot be found. (rsExecutionNotFound)]    Microsoft.Reporting.WebForms.ServerReportSoapProxy.OnSoapException(SoapException e) +72    Microsoft.Reporting.WebForms.Internal.Soap.ReportingServices2005.Execution.ProxyMethodInvocation.Execute(RSExecutionConnection connection, ProxyMethod`1 initialMethod, ProxyMethod`1 retryMethod) +428    Microsoft.Reporting.WebForms.Internal.Soap.ReportingServices2005.Execution.RSExecutionConnection.GetExecutionInfo() +133    Microsoft.Reporting.WebForms.ServerReport.EnsureExecutionSession() +197    Microsoft.Reporting.WebForms.ServerReport.LoadViewState(Object viewStateObj) +256    Microsoft.Reporting.WebForms.ServerReport..ctor(SerializationInfo info, StreamingContext context) +355 [TargetInvocationException: Exception has been thrown by the target of an invocation.]    System.RuntimeMethodHandle._SerializationInvoke(Object target, SignatureStruct&amp; declaringTypeSig, SerializationInfo info, StreamingContext context) +0    System.Reflection.RuntimeConstructorInfo.SerializationInvoke(Object target, SerializationInfo info, StreamingContext context) +108    System.Runtime.Serialization.ObjectManager.CompleteISerializableObject(Object obj, SerializationInfo info, StreamingContext context) +273    System.Runtime.Serialization.ObjectManager.FixupSpecialObject(ObjectHolder holder) +49    System.Runtime.Serialization.ObjectManager.DoFixups() +223    System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler handler, __BinaryParser serParser, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage) +188    System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream serializationStream, HeaderHandler handler, Boolean fCheck, Boolean isCrossAppDomain, IMethodCallMessage methodCallMessage) +203    System.Web.Util.AltSerialization.ReadValueFromStream(BinaryReader reader) +788    System.Web.SessionState.SessionStateItemCollection.ReadValueFromStreamWithAssert() +55    System.Web.SessionState.SessionStateItemCollection.DeserializeItem(String name, Boolean check) +281    System.Web.SessionState.SessionStateItemCollection.DeserializeItem(Int32 index) +110    System.Web.SessionState.SessionStateItemCollection.get_Item(Int32 index) +17    System.Web.SessionState.HttpSessionStateContainer.get_Item(Int32 index) +13    System.Web.Util.AspCompatApplicationStep.OnPageStartSessionObjects() +71    System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2065 This error occurs long after the report viewer page has closed. It occurs to any asp.net page in the application, rendering the entire application unusable until the user gets a new session. The cause of the problem is that the ReportViewer uses session state. When a page retrieves session from any out-of-state session, the session variable of type Microsoft.Reporting.WebForms.ReportHierarchy is deserialized from the session storage. The deserialization could cause the object to connect to the report server when the report is no longer available. The solution is simple but not pretty. We need to clean up the session variable when the report viewer page is closed. One way is to add some Javascript to the page to handle the window.onunload event. In the event handler, call a web service to clean up the session variable. The name of the session variable appears to be randomly generated. So we need to loop through the session variable to find a variable of the type Microsoft.Reporting.WebForms.ReportHierarchy. Microsoft has implemented pinging between the report viewer and the report server to keep the report alive on the server when the report viewer is up; I hope they will go one step further to take care of this problem.

  Read the article

• Upgrading from MVC 1.0 to MVC2 in Visual Studio 2010 and VS2008.

  - by Sam Abraham

  With MVC2 officially released, I was involved in a few conversations regarding the feasibility of upgrading existing MVC 1.0 projects to quickly leverage the newly introduced MVC features. Luckily, Microsoft has proactively addressed this question for both Visual Studio 2008 and 2010 and many online resources discussing the upgrade process are a "Bing/Google Search" away. As I will happen to be speaking about MVC2 and Visual Studio 2010 at the Ft Lauderdale ArcSig .Net User Group Meeting on April 20th 2010 (Check http://www.fladotnet.com for more info.), I decided to include a quick demo on upgrading the NerdDinner project (which I consider the "Hello MVC World" project) from MVC 1.0 to MVC2 using Visual studio 2010 to demonstrate how simple the upgrade process is. In the next few lines, I will be briefly touching on upgrading to MVC2 for Visual Studio 2008 then discussing, in more detail, the upgrade process using Visual Studio 2010 while highlighting the advantage of its multi-targeting support. Using Visual Studio 2008 SP1 For upgrading to MVC2 Using VS2008 SP1, a Microsoft White Paper [1] presents two approaches:  1- Using a provided automated upgrade tool, 2-Manually upgrading the project. I personally prefer using the automated tool although it comes with an "AS IS" disclaimer. For those brave souls, or those who end up with no luck using the tool, detailed manual upgrade steps are also provided as a second option. Backing up the project in question is a must regardless of which route one would take to upgrade. Using Visual Studio 2010 Life is much easier for developers who already adopted Visual Studio 2010. Simply opening the MVC 1.0 solution file brings up the upgrade wizard as shown in figures 1, 2, 3 and 4. As we proceed with the upgrade process, the wizard requests confirmation on whether we choose to upgrade our target framework version to .Net 4.0 or keep the existing .Net 3.5 (Figure 5). VS2010 does a good job with multi-targeting where we can still develop .Net 3.5 applications while leveraging all the new bells and whistles that VS2010 brings to the table (Multi-targeting enables us to develop with as early as .Net 2.0 in VS2010) Figure 1 - Open Solution File Using VS2010   Figure 2 - VS2010 Conversion Wizard Figure 3- Ready To Convert To VS2010 Confirmation Screen Figure 4 - VS2010 Solution Conversion Progress Figure 5 - Confirm Target Framework Upgrade In an attempt to make my demonstration realistic, I decided to opt to keep the project targeted to the .Net 3.5 Framework.  After the successful completion of the conversion process,  a quick sanity check revealed that the NerdDinner project is still targeted to the .Net 3.5 framework as shown in figure 6. Inspecting the Web.Config revealed that the MVC DLL version our code compiles against has been successfully upgraded to 2.0 (Figure 7) and hence we should now be able to leverage the newly introduced features in MVC2 and VS2010 with no effort or time invested on modifying existing code. Figure 6- Confirm Target Framework Remained .Net 3.5  Figure 7 - Confirm MVC DLL Version Has Been Upgraded In Conclusion, Microsoft has empowered developers with the tools necessary to quickly and seamlessly upgrade their MVC solutions to the newly released MVC2. The multi-targeting feature in Visual Studio 2010 enables us to adopt this latest and greatest development tool while supporting development in as early as .Net 2.0. References 1. "Upgrading an ASP.NET MVC 1.0 Application to ASP.NET MVC 2" http://www.asp.net/learn/whitepapers/aspnet-mvc2-upgrade-notes

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >