Search Results

Search found 3195 results on 128 pages for 'utility'.

Page 91/128 | < Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >

• How to install Windows 8 to dual boot with Windows 7/XP?

  - by Gopinath

  Microsoft released Windows 8 beta(customer preview) few days ago and yesterday I had a chance to install it on one of my home computers. My home PC is running on Windows 7 and I would like to install Windows 8 side by side so that I can dual boot. The installation process was pretty simple and with in 40 minutes my PC was up and running with beautiful Windows 8 OS along with Windows 7. In this post I want to share my experience and provide information for you to install Windows 8. 1. Identify a drive  with at least 20 GB of space – Identify one of the drives on your hard disk that can be used to install Windows 8. Delete all the files or preferably quick format it and make sure that it has at least 20 GB of free space. Rename the drive name to Windows 8 so that it will be helpful to identify the destination drive during installation process. 2. Download Windows 8 installer ISO– Go to Microsoft’s website and download Windows 8 ISO file which is approximately 2.5 GB file(32 bit English version). 3. Create Windows 8 bootable USB/DVD – Its advised to launch Windows 8 installer using a bootable USB or DVD for enabling dual boot instead of unzipping the ISO file and launching the setup from Windows 7 OS. Also consider creating bootable USB instead of bootable DVD to save a disc. To create bootable USB/DVD follow these steps Download and install the Windows 7 DVD / USB tool available at microsoftstore.com Launch the utility and follow the onscreen instructions where you would be asked to choose the ISO file(point to file downloaded in step 2) and choose a USB drive or DVD as destination. The onscreen instructions are very simple and you would be able to complete it in 20 minutes time. So now you have Windows 8 installation setup on your USB drive or DVD. 4. Change BIOS settings to boot from USB/DVD – Restart your PC and open BIOS configuration settings key by pressing F2 or  F12 or DELETE key (the key depends on your computer manufacturer). Go to boot sequence options and make sure that USB/DVD is ahead of hard disk in the boot sequence. Save the settings and restart the PC. 5. Install Windows 8 – After the restart you should be straight into Windows 8 installation screen. Follow the onscreen instructions and install Windows 8 on the drive that is identified during step 1. When prompted for product serial key enter NF32V-Q9P3W-7DR7Y-JGWRW-JFCK8. The installer would restart couple of times during the installation process. On the first restart, make sure that you remove USB/DVD. Windows 8 installation process is pretty simple and very quick. The complete process of creating bootable USB and installation should complete in 30 – 40 minutes time.

  Read the article

• Add "My Dropbox" to Your Windows 7 Start Menu

  - by The Geek

  Over here at How-To Geek, we’re huge fans of Dropbox, the amazingly fast online file sync utility, but we’d be even happier if we could natively add it to the Windows 7 Start Menu, where it belongs. And today, that’s what we’ll do. Yep, that’s right. You can add it to the Start Menu… using a silly hack to the Libraries feature and renaming the Recorded TV library to a different name. It’s not a perfect solution, but you can access your Dropbox folder this way and it just seems to belong there. First things first, head into the Customize Start Menu panel by right-clicking on the start menu and using Properties, then make sure that Recorded TV is set to “Display as a link”. Next, right-click on Recorded TV, choose Rename, and then change it to something else like My Dropbox.   Now you’ll want to right-click on that button again, and choose Properties, where you’ll see the Library locations in the list… the general idea is that you want to remove Recorded TV, and then add your Dropbox folder. Oh, and you’ll probably want to make sure to set “Optimize this library for” to “General Items”. At this point, you can just click on My Dropbox, and you’ll see, well, Your Dropbox! (no surprise there). Yeah, I know, it’s totally a hack. But it’s a very useful one! Also, if you aren’t already using Dropbox, you should really check it out—2 GB for free, accessible via the web from anywhere, and you can sync to multiple desktops. Similar Articles Productive Geek Tips Use the Windows Key for the "Start" Menu in Ubuntu LinuxAccess Your Dropbox Files in Google ChromeSpeed up Windows Vista Start Menu Search By Limiting ResultsPin Any Folder to the Vista Start Menu the Easy WayEnable "Pin to Start Menu" for Folders in Windows Vista / XP TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Classic Cinema Online offers 100’s of OnDemand Movies OutSync will Sync Photos of your Friends on Facebook and Outlook Windows 7 Easter Theme YoWindoW, a real time weather screensaver Optimize your computer the Microsoft way Stormpulse provides slick, real time weather data

  Read the article

• Unity DontDestroyOnLoad causing scenes to stay open

  - by jkrebsbach

  Originally posted on: http://geekswithblogs.net/jkrebsbach/archive/2014/08/11/unity-dontdestroyonload-causing-scenes-to-stay-open.aspxMy Unity project has a class (ClientSettings) where most of the game state & management properties are stored.  Among these are some utility functions that derive from MonoBehavior.  However, between every scene this object was getting recreated and I was losing all sorts of useful data.  I learned that with DontDestroyOnLoad, I can persist this entity between scenes.  Super.Persisting information between scenesThe problem with adding DontDestroyOnLoad to my "ClientSettings" was suddenly my previous scene would stay alive, and continue to execute its update routines.  An important part of the documentation helps shed light to my issues:"If the object is a component or game object then its entire transform hierarchy will not be destroyed either."My ClientSettings script was attached to the main camera on my first scene.  Because of this, the Main Camera was part of the hierarchy of the component, and therefore was also not able to destroy when switching scenes.  Now the first scene's main camera Update routine continues to execute after the second scene is running - causing me to have some very nasty bugs.Suddenly I wasn't sure how I should be creating a persistent entity - so I created a new sandbox project and tested different approaches until I found one that works:In the main scene: Create an empty Game Object:  "GameManager" - and attach the ClientSettings script to this game object.  Set any properties to the clientsettings script as appropriate.Create a prefab, using the GameManager.Remove the Game Object from the main scene.In the Main Camera, I created a script:  Main Script.  This is my primary script for the main scene.<code> public GameObject[] prefabs; private ClientSettings _clientSettings; // Use this for initialization void Start () { GameObject res = (GameObject)Instantiate(prefabs[0]); }</code>Now go back out to scene view, and add the new GameManager prefab to the prefabs collection of MainScript.When the main scene loads, the GameManager is set up, but is not part of the main scene's hierarchy, so the two are no longer tied up together.Now in our second scene, we have a script - SecondScript - and we can get a reference to the ClientSettings we created in the previous scene like so:<code>private ConnectionSettings _clientSettings; // Use this for initialization void Start () { _clientSettings = FindObjectOfType<ConnectionSettings> (); }</code>And the scenes can start and finish without creating strange long-running scene side effects.

  Read the article

• Maintaining Revision Levels

  - by kyle.hatlestad

  A question that came up on an earlier blog post was how to limit the number of revisions on a piece of content. UCM does not inherently enforce any sort of limit on how many revisions you can have. It's unlimited. In some cases, there may be content that goes through lots of changes, but there just simply isn't a need to keep all of its revisions around. Deleting those revisions through the content information screen can be very cumbersome. And going through the Repository Manager applet can take time as well to filter and find the revisions to get rid of. But there is an easier way through the Archiver. The Export Query criteria in Archiver includes a very handy field called 'Revision Rank'. With revision labels, they typically go up as new revisions come in (e.g. 1, 2, 3, 4, etc...). But you can't really use this field to tell it to keep the top 5 revisions. Those top 5 revision numbers are always going up. But revision rank goes the opposite direction. The very latest revision is always 0. The previous revision to that is 1. Previous revision to that is 2. And so on and so forth. With revision rank, you can set your query to look for any Revision Rank greater or equal to 5. Now as older revisions move down the line, their revision rank gets higher and higher until they reach that threshold. Then when you run that archive export, you can choose to delete and remove those revisions. Running that export in Archiver is normally a manual process. But with Idc Command, you can script the process and have it run automatically from the server. Idc Command is a utility that allows you to run any of the content server services via the command line. You basically feed it a text file with the services and parameters defined along with the user to run it as. The Idc Command executable is located within the \bin\ directory: $ ./IdcCommand -f DeleteOlderRevisions.txt -u sysadmin -l delete_revisions.log In this example, our IdcCommand file to run the export and do the deletions would look like: IdcService=EXPORT_ARCHIVE aArchiveName=DeleteOlderRevisions aDoDelete=1 IDC_Name=idc dataSource=RevisionIDs <<EOD>> You can then use automated scheduling routines in the OS to run the command and command file at the frequency needed. Remember that you are deleting the revisions from within UCM, but they are still getting placed within the archive. So you will need to delete those batches to have them fully removed (or re-import if you need to recover them). For more information about Idc Command, you can find that in the Idc Command Reference Guide.

  Read the article

• Windows CE: Changing Static IP Address

  - by Bruce Eitman

  A customer contacted me recently and asked me how to change a static IP address at runtime.  Of course this is not something that I know how to do, but with a little bit of research I figure out how to do it. It turns out that the challenge is to request that the adapter update itself with the new IP Address.  Otherwise, the change in IP address is a matter of changing the address in the registry for the adapter.   The registry entry is something like: [HKEY_LOCAL_MACHINE\Comm\LAN90001\Parms\TcpIp]    "EnableDHCP"=dword:0    "IpAddress"="192.168.0.100"     "DefaultGateway"="192.168.0.1"    "Subnetmask"="255.255.255.0" Where LAN90001 would be replace with your adapter name.  I have written quite a few articles about how to modify the registry, including a registry editor that you could use. Requesting that the adapter update itself is a matter of getting a handle to the NDIS driver, and then asking it to refresh the adapter.  The code is: #include <windows.h> #include "winioctl.h" #include "ntddndis.h"   void RebindAdapter( TCHAR *adaptername ) {       HANDLE hNdis;       BOOL fResult = FALSE;       int count;         // Make this function easier to use - hide the need to have two null characters.       int length = wcslen(adaptername);       int AdapterSize = (length + 2) * sizeof( TCHAR );       TCHAR *Adapter = malloc(AdapterSize);       wcscpy( Adapter, adaptername );       Adapter[ length ] = '\0';       Adapter[ length +1 ] = '\0';           hNdis = CreateFile(DD_NDIS_DEVICE_NAME,                   GENERIC_READ | GENERIC_WRITE,                   FILE_SHARE_READ | FILE_SHARE_WRITE,                   NULL,                   OPEN_ALWAYS,                   0,                   NULL);         if (INVALID_HANDLE_VALUE != hNdis)       {             fResult = DeviceIoControl(hNdis,                         IOCTL_NDIS_REBIND_ADAPTER,                         Adapter,                         AdapterSize,                         NULL,                         0,                         &count,                         NULL);             if( !fResult )             {                   RETAILMSG( 1, (TEXT("DeviceIoControl failed %d\n"), GetLastError() ));             }             CloseHandle(hNdis);       }       else       {             RETAILMSG( 1, (TEXT("Failed to open NDIS Handle\n")));       }   }       int WINAPI WinMain(HINSTANCE hInstance, HINSTANCE hPrevInstance, LPWSTR    lpCmdLine, int       nCmdShow) {     RebindAdapter( TEXT("LAN90001") );     return 0; }   If you don’t want to write any code, but instead plan to use a registry editor to change the IP Address, then there is a command line utility to do the same thing.  NDISConfig.exe can be used: Ndisconfig adapter rebind LAN90001    Copyright © 2012 – Bruce Eitman All Rights Reserved

  Read the article

• Language Club

  - by Ben Griswold

  We started a language club at work this week.  Thus far, we have a collective interest in a number of languages: Python, Ruby, F#, Erlang, Objective-C, Scala, Clojure, Haskell and Go. There are more but these 9 received the most votes. During the first few meetings we are going to determine which language we should tackle first. To help make our selection, each member will provide a quick overview of their favored language by answering the following set of questions: Why are you interested in learning “your” language(s). (There’s lots of work, I’m an MS shill, It’s hip and  fun, etc) What type of language is it?  (OO, dynamic, functional, procedural, declarative, etc) What types of problems is your language best suited to solve?  (Algorithms over big data, rapid application development, modeling, merely academic, etc) Can you provide examples of where/how it is being used?  If it isn’t being used, why not?  (Erlang was invented at Ericsson to provide an extremely fault tolerant, concurrent system.) Quick history – Who created/sponsored the language?  When was it created?  Is it currently active? Does the language have hardware support (an attempt was made at one point to create processor instruction sets specific to Prolog), or can it run as an interpreted language inside another language (like Ruby in the JVM)? Are there facilities for programs written in this language to communicate with other languages?  How does this affect its utility? Does the language have a IDE tool support?  (Think Eclipse or Visual Studio) How well is the language supported in terms of books, community and documentation? What’s the number one things which differentiates the language from others?  (i.e. Why is it cool?) How is the language applicability to us as consultants?  What would the impact be of using the language in terms of cost, maintainability, personnel costs, etc.? What’s the number one things which differentiates the language from others?  (i.e. Why is it cool?) This should provide an decent introduction into nearly a dozen languages and give us enough context to decide which single language deserves our undivided attention for the weeks to come.  Stay tuned for the winner…

  Read the article

• OAM11gR2: Enabling SSL in the Data Store

  - by Ekta Malik

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Enabling SSL in the Data Store of OAM11gR2 comprises of the below mentioned steps. Import the certificate/s required for establishing the trust with the Store(backend) in the keystore(cacerts) on the machine hosting OAM's Weblogic Admin server Restart the Weblogic Admin server Specify the <Hostname>:<SSL port> in the "Location" field of the Data Store and select the "Enable SSL" checkbox Pre-requisite:- Certificate/s to be imported are available for import Data Store has already been created using OAM admin console and the connection to the store is successful on non-SSL port( though one can always create a Data Store with SSL settings on the first go) Steps for importing the certificate/s:- One can use the keytool utility that comes bundled with JDK to import the certificate. The step for importing the certificate would be same for self-signed and third party certificates (like VeriSign) $JAVA_HOME/bin/keytool -import -v -noprompt -trustcacerts -alias <aliasname> -file <Path to the certificate file> -keystore $JAVA_HOME/jre/lib/security/cacerts Here $JAVA_HOME refers to the path of JDK install directory Note: In case multiple certificates are required for establishing the trust, import all those certificates using the same keytool command mentioned above  One can verify the import of the certificate/s by using the below mentioned command $JAVA_HOME/bin/keytool -list -alias <aliasname>-v -keystore $JAVA_HOME/jre/lib/security/cacerts When the trust gets established for the SSL communication, specifying the SSL specific settings in the Data Store (via OAM admin console) wouldn't result into the previously seen error (when Certificates are yet to be imported) and the "Test Connection" would be successful.

  Read the article

• Source of (programmer) inefficiency

  - by Daniel

  I am interested to gain a better insight about the possible reasons of personal inefficiency as programmers (and only in programming) due to – simply - our own errors (because we are humans – well, almost all of us). I am not interested in how much we are productive or in how many adjustements the customer asks for when the work is done, but where and how each of us spend that part of its time in tasks that are unproductive and there is no one to blame except ourselves. Excluding ego - feeding and / or self – gratification, what I am trying to get (for all of us) is: what are the common issues eating our time; insight on reasons for that issues; identify simple way for us, personally (not delegating actions to other or our organizations), to correct our own problems. Please, do not think in academic terms but aim at the opportunity to compare our daily experiences and understand what are and how we try to fix our personal deficiencies. If you are interested to respond to this post, please: integrate the list if you see something important (or obvious) missing; highlight or name honestly your first issue tellng the way you try to address and solve your issue acting on yourself and yourself only in a sort of "continuous quality improving" My criteria for accepting the answer is: choose the best solution (feasibility and utility) to fix one (or more) of the problems of the list. Of course, selecting an error is not a vote on our skills: maybe we are hyper professional programmers and we lose ten minutes only every year or we are terribly inefficient, losing a couple of days a week: reasons for inefficiency could be really the same - but in a different scale. A possible list: Plain error in the names (variables, functions). Inability to see the obvious in your code. Misreading. Lack of concentration. Trying to use a technology you have not mastered. Errors with data types. Time required to understand your previous code or your documentation. Trying to do something more than requested because you enjoy it Using solutions more complicated than required because you enjoy it. Plain logical errors. Errors due to your fault in communications. Distraction My first personal issue: "Trying to use a technology you do not master." I have to use daily several technologies and I often need to spend significant time correcting code because my assumptions were plainly wrong. Reasons for this: production needs put high pressure and make difficult to find the time to learn. I try to address this reading technical books - as many as I can - even if this actually consumes a lot of time.

  Read the article

• Economic modelling - Resources for valuing goods

  - by Rushyo

  tl;dr: What economic/computer science books would you suggest for learning about economic valuation of goods and simulations thereof? I'm looking to create an economic model for a game based on goods created procedurally. Every natural resource and produced good would be procedurally generated, with certain goods being assigned certain uses. Fakesium might be used for the production of Weapon A and produced from Fakesium factories which use Dilithium and Widgets as reagents, where Widgets are also the product of Foo and Bar The problem is not creating the resources and their various production utlities - but getting the game's AI empires and merchants to correctly value the goods according to their scarcity, utility and production costs. I need to create a simulation of goods which allows the various game factions to assign a common value denominator (credits) to each resource, depending on how much its worth to that empire. I see the simulation being something like: "I have a high requirement for Weapon A. Since I don't have much of Fakesium, which is needed for Weapon A - I must have a high demand for Fakesium. If I can acquire Fakesium, devalue it. If not, increase its value - and also increase demand for Dilithium and Widgets too." This is very naive - because it may be much much cheaper for the empire to simply purchase Dilithium and Widgets directly rather than purchasing Fakesium, for example. Another example is two resources might allow the creation of Weapon A (Fakesium and Lieron), so we'd need to consider that. I've been scratching my head over the problem and it keeps growing. By the time the player joins the world, I'd expect enough iterations of this process to have occurred that prices would have largely normalised - and would then only trigger rarely to compensate for major changes (eg. if the player blows up the world's only Foo mine!) Could anyone suggest resources (books, largely) which outline this style of modelling, preferably in the context of simulations? Since this problem would never occur outside fantasy worlds, I figured this is probably the most likely place to find people who have encountered similar problems and I'm sure there's people who know of good places for Games Developers to start looking at less specific economic theory too. Additionally, does anyone know of any developers with blogs whose games or research applications perform similar modelling?

  Read the article

• Find a Faster DNS Server with Namebench

  - by Mysticgeek

  One way to speed up your Internet browsing experience is using a faster DNS server. Today we take a look at Namebench, which will compare your current DNS server against others out there, and help you find a faster one. Namebench Download the file and run the executable (link below). Namebench starts up and will include the current DNS server you have configured on your system. In this example we’re behind a router and using the DNS server from the ISP. Include the global DNS providers and the best available regional DNS server, then start the Benchmark. The test starts to run and you’ll see the queries it’s running through. The benchmark takes about 5-10 minutes to complete. After it’s complete you’ll get a report of the results. Based on its findings, it will show you what DNS server is fastest for your system. It also displays different types of graphs so you can get a better feel for the different results. You can export the results to a .csv file as well so you can present the results in Excel. Conclusion This is a free project that is in continuing development, so results might not be perfect, and there may be more features added in the future. If you’re looking for a method to help find a faster DNS server for your system, Namebench is a cool free utility to help you out. If you’re looking for a public DNS server that is customizable and includes filters, you might want to check out our article on helping to protect your kids from questionable content using OpenDNS. You can also check out how to speed up your web browsing with Google Public DNS. Links Download NameBench for Windows, Mac, and Linux from Google Code Learn More About the Project on the Namebench Wiki Page Similar Articles Productive Geek Tips Open a Second Console Session on Ubuntu ServerShare Ubuntu Home Directories using SambaSetup OpenSSH Server on Ubuntu LinuxDisable the Annoying “This device can perform faster” Balloon Message in Windows 7Search For Rows With Special Characters in SQL Server TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app

  Read the article

• Unit Testing TSQL

  - by Grant Fritchey

  I went through a period of time where I spent a lot of effort figuring out how to set up unit tests for TSQL. It wasn't easy. There are a few tools out there that help, but mostly it involves lots of programming. well, not as much as before. Thanks to the latest Down Tools Week at Red Gate a new utility has been built and released into the wild, SQL Test. Like a lot of the new tools coming out of Red Gate these days, this one is directly integrated into SSMS, which means you're working where you're comfortable and where you already have lots of tools at your disposal. After the install, when you launch SSMS and get connected, you're prompted to install the tSQLt example database. Go for it. It's a quick way to see how the tool works. I'd suggest using it. It' gives you a quick leg up. The concepts are pretty straight forward. There are a series of CLR commands that you use to configure a test and the test assertions. In between you're calling TSQL, either calls to your structure, queries, or stored procedures. They already have the one things that I always found wanting in database tests, a way to compare tables of results. I also like the ability to create a dummy copy of tables for the tests. It lets you control structures and behaviors so that the tests are more focused. One of the issues I always ran into with the other testing tools is that setting up the tests might require potentially destructive changes to the structure of the database (dropping FKs, etc.) which added lots of time and effort to setting up the tests, making testing more difficult, and therefor, less useful. Functionally, this is pretty similar to the Visual Studio tests and TSQLUnit tests that I used to use. The primary improvement over the Visual Studio tests is that I'm working in SSMS instead of Visual Studio. The primary improvement over TSQLUnit is the SQL Test interface it self. A lot of the functionality is the same, but having a sweet little tool to manage & run the tests from makes a huge difference. Oh, and don't worry. You can still run these tests directly from TSQL too, so automation has not gone away. I'm still thinking about how I'd use this in a dev environment where I also had source control to fret. That might be another blog post right there. I'm just getting started with SQL Test, so this is the first of several blog posts & videos. Watch this space. Try the tool.

  Read the article

• Commit Review Questions

  - by Wes McClure

  Note: in this article when I refer to a commit, I mean the commit you plan to share with the rest of the team, if you have local commits that you plan to amend/combine, I am referring to the final result. In time you will find these easier to do as you develop, however, all of these are valuable before checking in!  The pre commit review is a nice time to polish what might have been several hours of intense work, during which these things were the last things on your mind!  If you are concerned about losing your work in the process of responding to these questions, first do a check-in and amend it as you go (assuming you are using a tool such as git that supports this), rolling the result into one nice commit for everyone else.  Did you review your commit, change by change, with a diff utility? If not, this is a list of reasons why you might want to start! Did you test your changes? If the test is valuable to be automated, is it? If it’s a manual testing scenario, did you at least try the basics manually? Are the additions/changes formatted consistently with the rest of the project? Lots of automated tools can help here, don’t try to manually format the code, that’s a waste of time and as a human you will fail repeatedly. Are these consistent: tabs versus spaces, indentation, spacing, braces, line breaks, etc Resharper is a great example of a tool that can automate this for you (.net) Are naming conventions respected? Did you accidently use abbreviations, unless you have a good reason to use them? Does capitalization match the conventions in the project/language? Are files partitioned? Sometimes we add new code in existing files in a pinch, it’s a good idea to split these out if they don’t belong ie: are new classes defined in new files, if this is something your project values? Is there commented out code? If you are removing an existing feature, get rid of it, that is why we have VCS If it’s not done yet, then why are you checking it in? Perhaps a stash commit (git)? Did you leave debug or unnecessary changes? Do you understand all of the changes? http://geekswithblogs.net/wesm/archive/2012/04/11/programming-doesnrsquot-have-to-be-magic.aspx Are there spelling mistakes? Including your commit message! Is your commit message concise? Is there follow up work? Are there tasks you didn’t write down that you need to follow up with? Are readability or reorganization changes needed? This might be amended into the final commit, or it might be future work that needs added to the backlog. Are there other things your team values that you should review?

  Read the article

• Salt River Project Identifies US$500,000 in Cost Reduction Opportunities Through Unified IT Portfolio Management

  - by Melissa Centurio Lopes

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Salt River Project (SRP) includes two entities serving the Phoenix area: the Salt River Project Agricultural Improvement and Power District and the Salt River Valley Water Users’ Association. The SRP district operates various power plants and generating stations to provide electricity to nearly 956,000 retail customers. The SRP association maintains an extensive system of reservoirs, wells, and irrigation laterals to deliver nearly 1 million acre-feet of water annually. Salt River Project implemented Oracle’s Primavera Portfolio Management to unify management of its extensive IT portfolio, including essential utility systems, like work and asset management, as well as programming frameworks and development tools. With the system, SRP discovered almost US$500,000 in cost-reduction opportunities by identifying redundant or low use software, including 150 applications that are close to being unsupported. The company retired 10 applications in the last year and upgraded 34 systems. SRP also identified preferred technologies and ensured that more than 90% of applications are based on standard technologies—reducing procurement costs, simplifying maintenance support, and lowering total cost of ownership. Solutions: Provided approximately 70 users in the IT support group with detailed insight into the product lifecycle of each piece of IT infrastructure and software in the entire portfolio Discovered almost US$500,000 in cost reduction opportunities by identifying redundant or low use software that could be eliminated or migrated to alternative solutions Identified approximately 150 applications that are close to being unsupported and prioritized them to begin modernization Click here to view more Oracle Primavera Portfolio Management solutions for SRP. Why Oracle Salt River Project chose Oracle’s Primavera Portfolio Management after evaluating it against four other solutions. “Oracle’s Primavera Portfolio Management offered the most functionality to support our diverse needs,” said Eileen Ahles, IT portfolio manager, Salt River Project. Read the complete customer success story Access a list of all Primavera customer success stories

  Read the article

• Process Rules!

  - by Ajay Khanna

  One of the key components of a process is “Business Rule”. Business rule takes many forms inside your process definition and in a way is a manifestation of your company’s business policy. Business rules inside the process are used for policy enforcement, governance, decision management, operations efficiency etc. Following are some basic types of rules that can be a part of your process. 1. Process conditions:  These are defined as the process gateways that determine a path process will take depending on the process parameters. For Example, if discount >10% go to approval path : if discount < 10% auto-approve order. 2. Data rules: These business rules are defined as facts in decision table or knowledge base. The process captures all required parameters and submits those to RETE based rules engine. Rules engine processes the data and returns the result back. For example, rules determining your insurance eligibility. 3. Event rules: Here the system is monitoring the various events and events patterns that are emerging inside the process or external to the process. You can define actions or alerts to be triggered when a certain pattern of events emerges over a specified time period. Such types of rules need Complex Event Processing and are used in applications like Credit Card Fraud detection or Utility Demand Response. 4. User Interface Rules: In order to add dynamic behavior to UI or to keep users from making mistakes and enforcing policy, another mechanism available is UI rules. They are evaluated as the end user is filling out the web forms. These may include enabling and disabling of UI as per business policy. An example could be, if the age of a user is less than 13 years, disable credit card field and enable parental approval required checkbox. Your process may include many of such rule types. Oracle OpenWorld provides a unique opportunity to listen to Oracle Business Process Management Experts and Customers.  We will discuss business rules during various sessions in Oracle OpenWorld. Two of the sessions specifically focused on business rules are listed below: Accelerating an Implementation of Complex Worldwide Business Approval Rules Wednesday, Oct 3, 10:15 AM Moscone South – 305 Oracle Business Rules Use Cases Design and Testing Wednesday, Oct 3, 3:30 PM Marriott Marquis - Golden Gate C3   Oracle Business Process Management Track covers a variety of topics, and speakers covering technology, methodology and best practices. You can see the list of Business process Management sessions here. Come back to this blog for more coverage from Oracle OpenWorld!

  Read the article

• Time passage arithmetic explanation

  - by Cyber Axe

  I ported this from http://www.effectgames.com/effect/article.psp.html/joe/Old_School_Color_Cycling_with_HTML5 some time ago. However i'm now wanting to modify it for the purpose of changing it from floating point to fixed point maths for enhanced efficiency (for those who are going to talk about premature optimization and what not, i want to have my entire engine in fixed point both as a learning process for me and so i can port code more easily to systems in the future that dont have native floating points such as arm cpus) My initial conversion to fixed points just resulted in the cycling stuck on either the first or last frame of cycling. Plus it would be nice to understand better how it works so i can add more options and so forth in the future, my maths however sucks and the comments are limited so i don't really know how the maths work for determining the frame it shoud use (cycleAmount) I was also a beginner when i ported it as i had no idea between floating points and integers and what not. So in summary my question is, can anyone give an explination of the arithmatic used for determining the cycleAmount (which determings the "frame" of the cycle) This is the working floating point maths version of the code: public final void cycle(Colour[] sourceColours, double timeNow, double speedAdjust) { // Cycle all animated colour ranges in palette based on timestamp. sourceColours = sourceColours.clone(); int cycleSize; double cycleRate; double cycleAmount; Cycle cycle; for (int i = 0, len = cycles.length; i < len; ++i) { cycle = cycles[i]; cycleSize = (cycle.HIGH - cycle.LOW) + 1; cycleRate = cycle.RATE / (int) (CYCLE_SPEED / speedAdjust); cycleAmount = 0; if (cycle.REVERSE < 3) { // Standard Cycle cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize); if (cycle.REVERSE < 1) { cycleAmount = cycleSize - cycleAmount; // If below 1 make sure its not reversed. } } else if (cycle.REVERSE == 3) { // Ping-Pong cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize << 1); if (cycleAmount >= cycleSize) { cycleAmount = (cycleSize * 2) - cycleAmount; } } else if (cycle.REVERSE < 6) { // Sine Wave cycleAmount = DFLOAT_MOD((timeNow / (1000 / cycleRate)), cycleSize); cycleAmount = Math.sin((cycleAmount * 3.1415926 * 2) / cycleSize) + 1; if (cycle.REVERSE == 4) { cycleAmount *= (cycleSize / 4); } else if (cycle.REVERSE == 5) { cycleAmount *= (cycleSize >> 1); } } if (cycle.REVERSE == 2) { reverseColours(sourceColours, cycle); } if (USE_BLEND_SHIFT) { blendShiftColours(sourceColours, cycle, cycleAmount); } else { shiftColours(sourceColours, cycle, cycleAmount); } if (cycle.REVERSE == 2) { reverseColours(sourceColours, cycle); } } colours = sourceColours; } // This utility function allows for variable precision floating point modulus. private double DFLOAT_MOD(final double d, final double b) { return (Math.floor(d * PRECISION) % Math.floor(b * PRECISION)) / PRECISION; }

  Read the article

• passwordless ssh not working

  - by kuurious

  I've tried to setup a password-less ssh b/w A to B and B to A as well. Generated the public and private key using ssh-keygen -trsa on both the machines. Used the ssh-copy-id utility to copy the public-keys from A to B as well as B to A. The passwordless ssh works from A to B but not from B to A. I've checked the permissions of the ~/ssh/ folder and seems to be normal. A's .ssh folder permissions: -rw------- 1 root root 13530 2011-07-26 23:00 known_hosts -rw------- 1 root root 403 2011-07-27 00:35 id_rsa.pub -rw------- 1 root root 1675 2011-07-27 00:35 id_rsa -rw------- 1 root root 799 2011-07-27 00:37 authorized_keys drwxrwx--- 70 root root 4096 2011-07-27 00:37 .. drwx------ 2 root root 4096 2011-07-27 00:38 . B's .ssh folder permissions: -rw------- 1 root root 884 2011-07-07 13:15 known_hosts -rw-r--r-- 1 root root 396 2011-07-27 00:15 id_rsa.pub -rw------- 1 root root 1675 2011-07-27 00:15 id_rsa -rw------- 1 root root 2545 2011-07-27 00:36 authorized_keys drwxr-xr-x 8 root root 4096 2011-07-06 19:44 .. drwx------ 2 root root 4096 2011-07-27 00:15 . A is an ubuntu 10.04 (OpenSSH_5.3p1 Debian-3ubuntu4, OpenSSL 0.9.8k 25 Mar 2009) B is a debian machine (OpenSSH_5.1p1 Debian-5, OpenSSL 0.9.8g 19 Oct 2007) From A: #ssh B works fine. From B: #ssh -vvv A ... ... debug1: SSH2_MSG_SERVICE_ACCEPT received debug2: key: /root/.ssh/identity ((nil)) debug2: key: /root/.ssh/id_rsa (0x7f1581f23a50) debug2: key: /root/.ssh/id_dsa ((nil)) debug3: Wrote 64 bytes for a total of 1127 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred gssapi-keyex,gssapi-with-mic,gssapi,publickey,keyboard-interactive,password debug3: authmethod_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod_is_enabled publickey debug1: Next authentication method: publickey debug1: Trying private key: /root/.ssh/identity debug3: no such identity: /root/.ssh/identity debug1: Offering public key: /root/.ssh/id_rsa debug3: send_pubkey_test debug2: we sent a publickey packet, wait for reply debug3: Wrote 368 bytes for a total of 1495 debug1: Authentications that can continue: publickey,password debug1: Trying private key: /root/.ssh/id_dsa debug3: no such identity: /root/.ssh/id_dsa debug2: we did not send a packet, disable method debug3: authmethod_lookup password debug3: remaining preferred: ,password debug3: authmethod_is_enabled password debug1: Next authentication method: password [email protected]'s password: Which essentially means it's not authenticating using the file /root/id_rsa. I ran the ssh-add command in both the machines as well. The authentication part of /etc/ssh/sshd_config file is # Authentication: LoginGraceTime 120 PermitRootLogin yes StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files I'm running out of ideas. Any help would be appreciated.

  Read the article

• Ubuntu Install 11.10 doesn't recognize Windows 7 installation with new HDD

  - by arlendo

  Replaced my crashed HDD with a Seagate 2TB Sata (bought from a company who pulled it from a working computer, OS unknown) and did a fresh install of Windows 7. Windows shows 100MB boot partition (bootable NTFS) and 200GB Windows partition (NTFS), the rest is unallocated. Win7 Disk Management says the partitioning type is Master Boot Record. Win7 boots and runs fine. Ubuntu 11.10 Install procedes to Allocate Drive Space screen and should say This computer currently has Windows 7 on it. What would you like to do? Instead, it says something like Install doesn't detect any existing OS on this computer. When I click on Something else, the partition table shows only the unallocated space of 1.8TB. Ubuntu Disk Utility says Partitioning: Master Boot Record, but GParted Live says Partition Table: gpt. It was my original intention to have the Windows boot partition and application partition, then install Ubuntu 11.10 using boot, root, swap, and home partitions, and maybe another partition just for data (mostly photos). Currently, I would be happy if I could just get Ubuntu installed along with Win7. I am aware of the MBR limits of 3 Primary partitions and 1 Extended partition. I suspect that my new HDD is partitioned for GPT and that is why Ubuntu can't see the Win7 installation. Am I on the right track? I was going to use Windows Disk Management to convert GPT to MBR but I only have the one drive on my AMD-64 mini-computer and it says I have to empty the drive of all partitions before I can access the Convert command. And I can't find any bootable software that would allow me to do that conversion. Here is the result of sudo fdisk -l: ubuntu@ubuntu:~$ sudo fdisk -l WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. Disk /dev/sda: 2000.4 GB, 2000398934016 bytes 224 heads, 19 sectors/track, 918004 cylinders, total 3907029168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xd4a68c18 Device Boot Start End Blocks Id System /dev/sda1 * 2048 206847 102400 7 HPFS/NTFS/exFAT /dev/sda2 206848 419637247 209715200 7 HPFS/NTFS/exFAT ubuntu@ubuntu:~$ Keep in mind that I'm a definite newbie to screwing around with the inner workings of Ubuntu. I previously had Ubuntu 10.04 running with Vista and I don't remember even having to partition anything that wasn't automatic in the install. Thanks for taking a look here. My Win7 is running fine but I miss my Ubuntu.

  Read the article

• LCM says Smart List import is complete but actually its not...Here are probable reasons

  - by RahulS

  First of all some basics of smart list: Administrators use Smart Lists to create custom drop-down lists that users access from data form cells. When clicking in cells whose members are associated with a Smart List (as a member property), users select items from drop-down lists instead of entering data. Users cannot type in cells that contain Smart Lists. Smart Lists display in cells as down arrows that expand when users click into the cells. Below link will give you more information on Smart Lists: http://download.oracle.com/docs/cd/E17236_01/epm.1112/hp_admin/enum_pg.html I got a simple query today, "The LCM process generates and indicates a status of "Complete", however, the 3,018 records do not appear in the Planning application. No error exists in the log to identify the problem." Things which can be checked in this case: 1. Spaces are not allowed in the Entry Name, 2. Spaces are allowed in the Entry Label, 3. The name must start with an alpha character or underscore, 4. Valid characters for the remaining part of the name must be alpha, numeric, or an underscore, 5. Enter a name that is unique within the smart list, 6. I am not sure about the limits but I have seen 22,000 members loaded fine, 7. ID for every entry should be unique,  8. IDs need not to be consecutive, Ex: It was go from 1 to 100 then 500 to 900 then 1900 to 4500 etc. While import .xml file using LCM there were no errors in the foundation and LCM migration logs, but when checked in the HyS9PlanningSysErr.log, few errors were found:Ex: The name Data_Coord_(Prod)_ACS is invalid, The name Sr_Dir_b+Medcd_Gvt_Rel_Sls_Mkt is invalid, The name entered is invalid. Enter a name that is unique within the smart list, Also, we can Load Smart List dimensions and Smart List dimension entries using the /DS:HSP_SMARTLISTS parameter in outlineload utility: OutlineLoad /A:acpt /U:admin /M /I:c:/smartlist_create1.csv /DS:HSP_SMARTLISTS /L:c:/OutlineLogs/outlineLoad.log /X:c:/OutlineLogs/outlineLoad.exc SmartList Name, Operation, Label, Display Order, Missing Label, Use Form Missing Label, Entry ID, Entry Name, Entry Label SL1,addsmartlist,SL1Label,,,,,, SL1,addEntry,,,,,,entry1,entrylabel1 SL1,addEntry,,,,,,entry2,entrylabel2 Cheers..!!! Rahul S. http://www.facebook.com/pages/HyperionPlanning/117320818374228

  Read the article

• Ubuntu 11.10 doesn't detect external usb hard drive

  - by Andrew

  I have been batting with this issue for a bit and cannot find the answer to it. So the Dmesg see's the device, being Symwave WDC WD64.... media@Media-pc:~$ dmesg | tail -n 20 [78678.719497] scsi 10:0:0:0: Direct-Access Generic- USB3.0 CRW -0 1.00 PQ: 0 ANSI: 0 CCS [78678.725621] scsi 10:0:0:1: Direct-Access Generic- USB3.0 CRW -1 1.00 PQ: 0 ANSI: 0 CCS [78684.073837] scsi 11:0:0:0: Direct-Access SYMWAVE WDC WD6400AAKS-0 3B01 PQ: 0 ANSI: 4 [78691.008126] scsi 11:0:0:0: uas_eh_abort_handler tag 0 [78691.008139] scsi 11:0:0:0: uas_eh_device_reset_handler tag 0 [78691.008147] scsi 11:0:0:0: uas_eh_target_reset_handler tag 0 [78691.008154] scsi 11:0:0:0: uas_eh_bus_reset_handler tag 0 [78691.080307] usb 2-2.4: reset high speed USB device number 9 using ehci_hcd [78691.221427] scsi 11:0:0:0: Device offlined - not ready after error recovery [78691.221498] scsi 11:0:0:0: rejecting I/O to offline device [78691.221519] scsi 11:0:0:0: rejecting I/O to offline device [78691.222952] scsi 11:0:0:1: Enclosure SYMWAVE SES 3B01 PQ: 0 ANSI: 4 [78691.223156] scsi 11:0:0:2: uas_sense_old: urb length 26 disagrees with IU sense data length 510, using 18 bytes of sense data [78691.225061] sd 11:0:0:0: Attached scsi generic sg3 type 0 [78691.225344] ses 11:0:0:1: Attached Enclosure device [78691.225495] ses 11:0:0:1: Attached scsi generic sg4 type 13 [78691.226266] sd 10:0:0:0: Attached scsi generic sg5 type 0 [78691.226653] sd 10:0:0:1: Attached scsi generic sg6 type 0 [78691.241647] sd 10:0:0:0: [sdd] Attached SCSI removable disk [78691.243832] sd 10:0:0:1: [sde] Attached SCSI removable disk It looks like it attaches sdd and sde. Now when i look in the disk utility it shows "Hard disk Symwave WD6400AAKS-0 device /dev/sdc doesn't show any other info then that, if i format, it says that it cannot open /dev/sdc no device or address error. Underneeth the device it does show two general usb3.0 CRW that are sdd and sde. Now if I do a fdisk -l it doesn't show the device: media@Media-pc:~$ sudo fdisk -l Disk /dev/sda: 80.0 GB, 80026361856 bytes 255 heads, 63 sectors/track, 9729 cylinders, total 156301488 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x000247de Device Boot Start End Blocks Id System /dev/sda1 * 2048 152176639 76087296 83 Linux /dev/sda2 152178686 156301311 2061313 5 Extended /dev/sda5 152178688 156301311 2061312 82 Linux swap / Solaris Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders, total 1953525168 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x948fc822 Device Boot Start End Blocks Id System /dev/sdb1 63 1953520064 976760001 7 HPFS/NTFS/exFAT So now I am confused. Any ideas how I get fdisk to see the device?

  Read the article

• RIM's current BB7 developer toolset is a joke

  - by mbrit

  tl;dr - RIM's current developer toolset is not fit for purpose.Background to this is that I'm currently working on a PhoneGap/Cordova project for a client that has to run on BlackBerry. The tooling is so ridiculous to use that even though I had a gentle dig at them in a Guardian piece it's worth having a more full-on attack.At the moment, RIM's pitch is that apps are built for the current BBOS7 devices using WebWorks. This is an HTML-based toolset. Essentially a browser is spun up in a native app container and your app is powered by JavaScript. Specific JavaScript libraries exist that thunk down to native capabilities no the device. I happen to use PhoneCap/Cordova in combination with this.The tooling is non-existent. I'm using TextMate, Ant, and Terminal to develop the app. There's no "console.log" output, and no debugging. The only way to instrument the app is to put "alert" calls in your code.Apart from the fact that that's *not* fine in 2012, how about this… every time you deploy a new app to the device, the device has to reboot. This process takes six minutes on a relatively modern BlackBerry device. How about this as well - in order to get a file into the package it has to be signed. My small app over here has 100 different files (75 or so generated). Signing doesn't happen locally, it happens on RIM's servers in Waterloo. Thus whenever you deploy the app you have this utility have to call RIM's servers 100 times. More to the point, sometimes during the day these servers have "micro-downtime" moments where they're unreachable for five or ten minutes, normally two or three times a day. Oh yes, you'll also get an email sent to you per signing on success or failure. 100 inbound emails, per deployment.(I started this post at the beginning of one of these cycles, by the way. That's how long it takes to build and deploy *once*. By the way, the change I made didn't work.)To clarify:* Change the script,* Build it using Ant,* Ant will spin up a Java app that talks to RIM's servers to sign it.* Receive 100 emails, assuming the server is up.* App deployed - takes about 30 seconds.* BlackBerry device restarts - takes about six minutes.* Find and open the app. Go through security prompts.* Test the app, with no "console.log" output and no debugger."Why not use the simulator?" I hear you ask. Well, apart from the fact that the simulator refused to reach any network service over HTTPS that I happen to own? (Some people suggest changing DNS settings for this known issue.) Admittedly, the simulator does show you console.log, but you still have the "six minute" restart issue on the simulator.Developers will understand this problem. Breaking concentration for six-plus minutes every time you want to deploy an app turns developing into a nightmare. Combining that with no worthy debugging tools turns the toolset into a joke.

  Read the article

• Some Oracle VM 3 updates

  - by wcoekaer

  Today we did another patch set update for Oracle VM 3 (3.0.3-build 227). This can be downloaded from My Oracle Support as patch ID 14736185. There are quite a few updates in here and I highly recommend any Oracle VM 3 customer or user to install this update. This patch can be installed on top of Oracle VM 3.0 versions 3.0.2 and 3.0.3. The patch is cumulative for 3.0.3. So if you already installed patch update 1 (3.0.3-150) then this will just be incremental on top of that and brings you to 3.0.3-build 227. There is a readme file which contains the patchlist in the patch info. The following patches are released on ULN for Oracle VM server 3.0 : initscripts-8.45.30-2.100.18.el5.x86_64 The inittab file and the /etc/init.d scripts. kernel-ovs-2.6.32.21-45.6.x86_64 The Linux kernel kernel-ovs-firmware-2.6.32.21-45.6.x86_64 Firmware files used by the Linux kernel osc-oracle-ocfs2-0.1.0-35.el5.noarch Oracle Storage Connect ocfs2 Plugin osc-plugin-manager-1.2.8-9.el5.3.noarch Oracle Storage Connect Plugin Infrastructure osc-plugin-manager-devel-1.2.8-9.el5.3.noarch Oracle Storage Connect Plugin Development ovs-agent-3.0.3-41.6.x86_64 Agent for Oracle VM xen-4.0.0-81.el5.1.x86_64 Xen is a virtual machine monitor xen-devel-4.0.0-81.el5.1.x86_64 Development libraries for Xen tools xen-tools-4.0.0-81.el5.1.x86_64 Various tooling for the manipulation of Xen instances Errata emails will be sent in the next few days with details on the above updates. Or you will find them here. I also did an update of my Oracle VM utilities to 0.4.0. They are also available from My Oracle Support, patch ID 14736239. These utils can be unzipped and installed on the server running Oracle VM Manager. Typically in /u01/app/oracle/ovm-manager-3/ovm_utils. There is a set of man pages in /u01/app/oracle/ovm-manager-3/ovm_utils/man/man8. There now are 6 commands : ovm_vmcontrol : VM level operations ovm_servercontrol : server level operations ovm_vmdisks : virtual disk/physical location mapping for VM disks ovm_vmmessage : message passing utility between the manager and the VM tools (in the Oracle VM templates) ovm_repocontrol : repository level operations ovm_poolcontrol : pool level operations Some of the new changes : at a pool level, acknowledge events and cascade to servers and virtual machines with outstanding events at a pool level, do a rescan of the storage for fibrechannel/iscsi disks if you add new devices (it does this operation then on every running server) at a repository level, fixup a device if it had a failed create repository at a repository level, refresh the repository and this will update the free space in the UI for ocfs2 repositories at a server level, acknowledge server events and cascade to virtual machines if needed at a VM level, acknowledge VM events at a VM level, bind vcpus to cores with vcpuset/vcpuget Please see the man pages and remember that these tools are just written As Is - no SRs... (per the documentation) Hopefully they are useful.

  Read the article

• Automate RAC Cluster Upgrades using EM12c

  - by HariSrinivasan

  One of the most arduous processes  in DB maintenance is upgrading Databases across major versions, especially for complex RAC Clusters.With the release of Database Plug-in  (12.1.0.5.0), EM12c Rel 3 (12.1.0.3.0)  now supports automated upgrading of RAC Clusters in addition to Standalone Databases. This automation includes: Upgrade of the complete Cluster across the nodes. ( Example: 11.1.0.7 CRS, ASM, RAC DB  ->   11.2.0.4 or 12.1.0.1 GI, RAC DB)  Best practices in tune with your operations, where you can automate upgrade in steps: Step 1: Upgrade the Clusterware to Grid Infrastructure (Allowing you to wait, test and then move to DBs). Step 2: Upgrade RAC DBs either separately or in group (Mass upgrade of RAC DB's in the cluster). Standard pre-requisite checks like Cluster Verification Utility (CVU) and RAC checks Division of Upgrade process into Non-downtime activities (like laying down the new Oracle Homes (OH), running checks) to Downtime Activities (like Upgrading Clusterware to GI, Upgrading RAC) there by lowering the downtime required. Ability to configure Back up and Restore options as a part of this upgrade process. You can choose to : a. Take Backup via this process (either Guaranteed Restore Point (GRP) or RMAN) b. Set the procedure to pause just before the upgrade step to allow you to take a custom backup c. Ignore backup completely, if there are external mechanisms already in place.  High Level Steps: Select the Procedure "Upgrade Database" from Database Provisioning Home page. Choose the Target Type for upgrade and the Destination version Pick and choose the Cluster, it picks up the complete topology since the clusterware/GI isn't upgraded already Select the Gold Image of the destination version for deploying both the GI and RAC OHs Specify new OH patch, credentials, choose the Restore and Backup options, if required provide additional pre and post scripts Set the Break points in the procedure execution to isolate Downtime activities Submit and track the procedure's execution status.  The animation below captures the steps in the wizard.  For step by step process and to understand the support matrix check this documentation link. Explore the functionality!! In the next blog, will talk about automating rolling Upgrades of Databases in Physical Standby Data Guard environment using Transient Logical Standby.

  Read the article

• SmartView 11.1.2.2.103 - Support for MS Office 64 added

  - by THE

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 (thanks to Nancy, who shared this with me)  New for Smart View v11.1.2.2.103, Patch 14362638,   Microsoft Office 64-bit is now supported:  Information for 64-Bit Microsoft Office Installations: In this release, Smart View supports the 64-bit version on Microsoft Office. If you use 64-bit Office, please note the following: Oracle provides separate Smart View installation files for 64-bit and 32-bit Office systems. . smartview-x64.exe is the file for 64-bit Office installations. smartview.exe is the file for 32-bit Office installations. The 64-bit version of Smart View pertains only to the 64-bit version of Microsoft Office and not to the version of the operating system. Customers with 64-bit operating systems and the 32-bit version of Microsoft Office should install the 32-bit version of Smart View. You cannot install the 64-bit version of Smart View from EPM Workspace (13530466). Although Planning Offline is supported for 64-bit operating systems, it is not supported for 64-bit Smart View installations. If you use Planning Offline with Smart View, you must use the 32-bit version of Smart View and the 32-bit version of Microsoft Office. In 64-bit versions of Excel 2010 SP1, the presence of Smart View functions may cause Excel to terminate abruptly and may prevent Copy Data Point and Paste Data Point functions from working. This is a Microsoft issue, and a service request has been filed with Microsoft. Workaround: Until the Microsoft fix, use the 32-bit version of Smart View. (13606492) The Smart View function migration utility is not supported on 64-bit Office. (14342207) /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin:0cm; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:10.0pt; font-family:"Times New Roman","serif";}

  Read the article

• Emaroo 1.4.0 Released

  - by WeigeltRo

  Emaroo is a free utility for browsing most recently used (MRU) lists of various applications. Quickly open files, jump to their folder in Windows Explorer, copy their path - all with just a few keystrokes or mouse clicks. tl;dr: Emaroo 1.4.0 is out, go download it on www.roland-weigelt.de/emaroo   Why Emaroo? Let me give you a few examples. Let’s assume you have pinned Emaroo to the first spot on the task bar so you can start it by hitting Win+1. To start one of the most recently used Visual Studio solutions you type Win+1, [maybe arrow key down a few times], Enter This means that you can start the most recent solution simply by Win+1, Enter What else? If you want to open an Explorer window at the file location of the solution, you type Ctrl+E instead of Enter.   If you know that the solution contains “foo” in its name, you can type “foo” to filter the list. Because this is not a general purpose search like e.g. the Search charm, but instead operates only on the MRU list of a single application, you usually have to type only a few characters until you can press Enter or Ctrl+E.   Ctrl+C copies the file path of the selected MRU item, Ctrl+Shift+C copies the directory If you have several versions of Visual Studio installed, the context menu lets you open a solution in a higher version.   Using the context menu, you can open a Visual Studio solution in Blend. So far I have only mentioned Visual Studio, but Emaroo knows about other applications, too. It remembers the last application you used, you can change between applications with the left/right arrow or accelerator keys. Press F1 or click the Emaroo icon (the tab to the right) for a quick reference. Which applications does Emaroo know about? Emaroo knows the MRU lists of Visual Studio 2008/2010/2012/2013 Expression Blend 4, Blend for Visual Studio 2012, Blend for Visual Studio 2013 Microsoft Word 2007/2010/2013 Microsoft Excel 2007/2010/2013 Microsoft PowerPoint 2007/2010/2013 Photoshop CS6 IrfanView (most recently used directories) Windows Explorer (directories most recently typed into the address bar) Applications that are not installed aren’t shown, of course. Where can I download it? On the Emaroo website: www.roland-weigelt.de/emaroo Have fun!

  Read the article

• LWJGL - Mixing 2D and 3D

  - by nathan

  I'm trying to mix 2D and 3D using LWJGL. I have wrote 2D little method that allow me to easily switch between 2D and 3D. protected static void make2D() { glEnable(GL_BLEND); GL11.glMatrixMode(GL11.GL_PROJECTION); GL11.glLoadIdentity(); glOrtho(0.0f, SCREEN_WIDTH, SCREEN_HEIGHT, 0.0f, 0.0f, 1.0f); GL11.glMatrixMode(GL11.GL_MODELVIEW); GL11.glLoadIdentity(); } protected static void make3D() { glDisable(GL_BLEND); GL11.glMatrixMode(GL11.GL_PROJECTION); GL11.glLoadIdentity(); // Reset The Projection Matrix GLU.gluPerspective(45.0f, ((float) SCREEN_WIDTH / (float) SCREEN_HEIGHT), 0.1f, 100.0f); // Calculate The Aspect Ratio Of The Window GL11.glMatrixMode(GL11.GL_MODELVIEW); glLoadIdentity(); } The in my rendering code i would do something like: make2D(); //draw 2D stuffs here make3D(); //draw 3D stuffs here What i'm trying to do is to draw a 3D shape (in my case a quad) and i 2D image. I found this example and i took the code from TextureLoader, Texture and Sprite to load and render a 2D image. Here is how i load the image. TextureLoader loader = new TextureLoader(); Sprite s = new Sprite(loader, "player.png") And how i render it: make2D(); s.draw(0, 0); It works great. Here is how i render my quad: glTranslatef(0.0f, 0.0f, 30.0f); glScalef(12.0f, 9.0f, 1.0f); DrawUtils.drawQuad(); Once again, no problem, the quad is properly rendered. DrawUtils is a simple class i wrote containing utility method to draw primitives shapes. Now my problem is when i want to mix both of the above, loading/rendering the 2D image, rendering the quad. When i try to load my 2D image with the following: s = new Sprite(loader, "player.png); My quad is not rendered anymore (i'm not even trying to render the 2D image at this point). Only the fact of creating the texture create the issue. After looking a bit at the code of Sprite and TextureLoader i found that the problem appears after the call of the glTexImage2d. In the TextureLoader class: glTexImage2D(target, 0, dstPixelFormat, get2Fold(bufferedImage.getWidth()), get2Fold(bufferedImage.getHeight()), 0, srcPixelFormat, GL_UNSIGNED_BYTE, textureBuffer); Commenting this like make the problem disappear. My question is then why? Is there anything special to do after calling this function to do 3D? Does this function alter the render part, the projection matrix?

  Read the article

< Previous Page | 87 88 89 90 91 92 93 94 95 96 97 98  | Next Page >